| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
| |
This fixes bug #6139 reported by Hitoshi Harada.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
pg_backup_db.c contained a mini SQL lexer with which it tried to identify
boundaries between SQL commands, but that code was not designed to cope
with standard_conforming_strings, and would get the wrong answer if a
backslash immediately precedes a closing single quote in such a string,
as per report from Julian Mehnle. The bug only affects direct-to-database
restores from archive files made with standard_conforming_strings = on.
Rather than complicating the code some more to try to fix that, let's just
rip it all out. The only reason it was needed was to cope with COPY data
embedded into ordinary archive entries, which was a layout that was used
only for about the first three weeks of the archive format's existence,
and never in any production release of pg_dump. Instead, just rely on the
archive file layout to tell us whether we're printing COPY data or not.
This bug represents a data corruption hazard in all releases in which
standard_conforming_strings can be turned on, ie 8.2 and later, so
back-patch to all supported branches.
|
| | |
|
| |
|
|
|
|
| |
On balance, the need to cover this case changes my mind in favor of pushing
all error-message generation duties into the two fe-secure.c routines.
So do it that way.
|
| |
|
|
|
|
|
|
|
|
| |
In many cases, pqsecure_read/pqsecure_write set up useful error messages,
which were then overwritten with useless ones by their callers. Fix this
by defining the responsibility to set an error message to be entirely that
of the lower-level function when using SSL.
Back-patch to 8.3; the code is too different in 8.2 to be worth the
trouble.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This disables an entirely unnecessary "sanity check" that causes failures
in nonblocking mode, because OpenSSL complains if we move or compact the
write buffer. The only actual requirement is that we not modify pending
data once we've attempted to send it, which we don't. Per testing and
research by Martin Pihlak, though this fix is a lot simpler than his patch.
I put the same change into the backend, although it's less clear whether
it's necessary there. We do use nonblock mode in some situations in
streaming replication, so seems best to keep the same behavior in the
backend as in libpq.
Back-patch to all supported releases.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PQsetvalue unnecessarily duplicated the logic in pqAddTuple, and didn't
duplicate it exactly either --- pqAddTuple does not care what is in the
tuple-pointer array positions beyond the last valid entry, whereas the
code in PQsetvalue assumed such positions would contain NULL. This led
to possible crashes if PQsetvalue was applied to a PGresult that had
previously been enlarged with pqAddTuple, for instance one built from a
server query. Fix by relying on pqAddTuple instead of duplicating logic,
and not assuming anything about the contents of res->tuples[res->ntups].
Back-patch to 8.4, where PQsetvalue was introduced.
Andrew Chernow
|
| | |
|
| |
|
|
| |
Patch by Akira Kurosawa <kurosawa-akira@mxc.nes.nec.co.jp>.
|
| |
|
|
|
|
|
|
|
|
| |
This fixes SSPI login failures showing "The function
requested is not supported", often showing up when connecting
to localhost. The reason was not properly updating the SSPI
handle when multiple roundtrips were required to complete the
authentication sequence.
Report and analysis by Ahmed Shinwari, patch by Magnus Hagander
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
First, when following a right-link, we incorrectly marked the current page
as the parent of the right sibling. In reality, the parent of the right page
is the same as the parent of the current page (or some page to the right of
it, gistFindCorrectParent() will sort that out).
Secondly, when we follow a right-link, we must prepend, not append, the right
page to our list of pages to visit. That's because we assume that once we
hit a leaf page in the list, all the rest are leaf pages too, and give up.
To hit these bugs, you need concurrent actions and several unlucky accidents.
Another backend must split the root page, while you're in process of
splitting a lower-level page. Furthermore, while you scan the internal nodes
to re-find the parent, another backend needs to again split some more internal
pages. Even then, the bugs don't necessarily manifest as user-visible errors
or index corruption.
While we're at it, make the error reporting a bit better if gistFindPath()
fails to re-find the parent. It used to be an assertion, but an elog() seems
more appropriate.
Backpatch to all supported branches.
|
| |
|
|
|
| |
These caused directories from future releases to appear in the
backbranch tree.
|
| |
|
|
|
|
|
|
| |
handleCopyIn incremented pset.lineno for each line of COPY data read from
a file. This is correct when reading from the current script file (i.e.,
we are doing COPY FROM STDIN followed by in-line data), but it's wrong if
the data is coming from some other file. Per bug #6083 from Steve Haslam.
Back-patch to all supported versions.
|
| |
|
|
| |
Per bug #6089, noted by Sidney Cadot
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
| |
Since commit a4d03bbcdaf7739d7e9073ee76bb186f68ddc163, "make dist" has
built both gzip- and bzip2-compressed tarballs. However, this was
pretty useless, because our tarball build script didn't know about it
and proceeded to overwrite the bz2 file with new data. Back-patch the
change to all active branches, so that creation of the tar.bz2 file
can be removed from the build script.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It is possible for a NestLoop plan node to pass an OUTER Var into an
"inner indexscan" that is an Append construct (derived from an inheritance
tree or UNION ALL subquery). The OUTER tuple is then passed down at
runtime to the leaf indexscan node(s) where it will actually be used.
EXPLAIN has to likewise pass the information about the nestloop's outer
subplan down through the Append node, else it will fail to print the
outer-reference Vars (with complaints like "bogus varno: 65001").
However, there was a case missed in all this: we could also have gating
Result nodes that were inserted into the appendrel plan tree to deal with
pseudoconstant qual conditions. So EXPLAIN has to pass down the outer plan
node to a Result's subplan, too. Per example from Jon Nelson.
The problem is gone in 9.1 because we replaced the nestloop outer-tuple
kluge with a Param-based data transfer mechanism. Also, so far as I can
tell, the case can't happen before 8.4 because of restrictions on what
sorts of appendrel members could be pulled up into the parent query.
So this patch is only needed for 8.4 and 9.0.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A password containing a character with the high bit set was misprocessed
on machines where char is signed (which is most). This could cause the
preceding one to three characters to fail to affect the hashed result,
thus weakening the password. The result was also unportable, and failed
to match some other blowfish implementations such as OpenBSD's.
Since the fix changes the output for such passwords, upstream chose
to provide a compatibility hack: password salts beginning with $2x$
(instead of the usual $2a$ for blowfish) are intentionally processed
"wrong" to give the same hash as before. Stored password hashes can
thus be modified if necessary to still match, though it'd be better
to change any affected passwords.
In passing, sync a couple other upstream changes that marginally improve
performance and/or tighten error checking.
Back-patch to all supported branches. Since this issue is already
public, no reason not to commit the fix ASAP.
|
| |
|
|
| |
Also be more careful about markup: use & not just &.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When recursing after an optimization in pull_up_sublinks_qual_recurse, the
available_rels value passed down must include only the relations that are
in the righthand side of the new SEMI or ANTI join; it's incorrect to pull
up a sub-select that refers to other relations, as seen in the added test
case. Per report from BangarRaju Vadapalli.
While at it, rethink the idea of recursing below a NOT EXISTS. That is
essentially the same situation as pulling up ANY/EXISTS sub-selects that
are in the ON clause of an outer join, and it has the same disadvantage:
we'd force the two joins to be evaluated according to the syntactic nesting
order, because the lower join will most likely not be able to commute with
the ANTI join. That could result in having to form a rather large join
product, whereas the handling of a correlated subselect is not quite that
dumb. So until we can handle those cases better, #ifdef NOT_USED that
case. (I think it's okay to pull up in the EXISTS/ANY cases, because SEMI
joins aren't so inflexible about ordering.)
Back-patch to 8.4, same as for previous patch in this area. Fortunately
that patch hadn't made it into any shipped releases yet.
|
| |
|
|
|
| |
Applied patch by Christoph Berg <cb@df7cb.de> to replace placeholder "%s" by
correct string.
|
| |
|
|
|
|
| |
I mis-simplified the test where ANALYZE decided if it could get away
without doing anything: under the new regime, that's never allowed. Per
bug #6068 from Jeff Janes. Back-patch to 8.4, just like previous patch.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a dangerous example to provide because on machines with GNU cp,
it will silently do the wrong thing and risk archive corruption. Worse,
during the 9.0 cycle somebody "improved" the discussion by removing the
warning that used to be there about that, and instead leaving the
impression that the command would work as desired on most Unixen.
It doesn't. Try to rectify the damage by providing an example that is safe
most everywhere, and then noting that you can try cp -i if you want but
you'd better test that.
In back-patching this to all supported branches, I also added an example
command for Windows, which wasn't provided before 9.0.
|
| |
|
|
|
|
|
|
|
|
| |
For some reason, when we (I) added table lock acquisition to pg_dump,
we didn't think about making it happen as soon as possible after the
start of the transaction. What with subsequent additions, there was
actually quite a lot going on before we got around to that; which sort
of defeats the purpose. Rearrange the order of calls in dumpSchema()
to close the risk window as much as we easily can. Back-patch to all
supported branches.
|
| |
|
|
|
|
|
|
|
| |
The previous code went into an infinite loop after overflow. In fact,
an overflow is not really an error; it just means that the current
value is the last one we need to return. So, just arrange to stop
immediately when overflow is detected.
Back-patch all the way.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This oversight could result in a tuplestore using much more than the
intended amount of memory. It would only happen in a code path that loaded
a tuplestore via tuplestore_putvalues(), and many of those won't emit huge
amounts of data; but cases such as holdable cursors and plpgsql's RETURN
NEXT command could have the problem. The fix ensures that the tuplestore
will switch to write-to-disk mode when it overruns work_mem.
The potential overrun was finite, because we would still count the space
used by the tuple pointer array, so the tuplestore code would eventually
flip into write-to-disk mode anyway. When storing wide tuples we would
go far past the expected work_mem usage before that happened; but this
may account for the lack of prior reports.
Back-patch to 8.4, where tuplestore_putvalues was introduced.
Per bug #6061 from Yann Delorme.
|
| |
|
|
|
|
|
|
|
|
|
| |
We previously found out that OS X's standard perl installation tries to put
-arch switches into Perl link commands, evidently in hopes of building
universal binaries. But it doesn't work to add such switches in plperl's
link step if they weren't being used earlier, so this is basically
unworkable. When using gcc the result is only some warnings; but LLVM
fails entirely, so this issue isn't as cosmetic as we originally thought.
Hence, back-patch commit d69a419e682c2d39c2355105a7e5e2b90357c8f0 into
pre-9.0 branches.
|
| |
|
|
|
|
| |
Apparently there is no buildfarm critter exercising this case after all,
because it fails in several places. With this patch, build, install,
check-world, and installcheck-world pass for me on OS X.
|
| |
|
|
| |
Spotted by Jaime Casanova
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
ReadRecord's habit of using both direct references to tmpRecPtr and
references to *RecPtr (which is pointing at tmpRecPtr) triggers an
optimization bug in gcc 4.6.0, which apparently has forgotten about
aliasing rules. Avoid the compiler bug, and make the code more readable
to boot, by getting rid of the direct references. Improve the comments
while at it.
Back-patch to all supported versions, in case they get built with 4.6.0.
Tom Lane, with some cosmetic suggestions from Alex Hunsaker
|
| | |
|
| |
|
|
|
|
|
|
| |
Using -s when registering a service will now suppress
the application eventlog entries stating that the service
is starting and started.
MauMau
|
| |
|
|
|
|
|
|
|
|
|
| |
The documentation of the columns collection_type_identifier and
dtd_identifier was wrong. This effectively reverts commits
8e1ccad51901e83916dae297cd9afa450957a36c and
57352df66d3a0885899d39c04c067e63c7c0ba30 and updates the name
array_type_identifier (the name in SQL:1999) to
collection_type_identifier.
closes bug #5926
|
| |
|
|
| |
Patch from Alex Hunsaker.
|
| |
|
|
| |
Marc Cousin
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We were trying to make that strictly an internal implementation detail,
but it turns out that it's exposed anyway when dumping a view defined
like
CREATE VIEW test_view AS VALUES (1), (2), (3) ORDER BY 1;
This comes out as
CREATE VIEW ... ORDER BY "*VALUES*".column1;
which fails to parse when reloading the dump.
Hacking ruleutils.c to suppress the column qualification looks like it'd
be a risky business, so instead promote the RTE alias to full-fledged
usability.
Per bug #6049 from Dylan Adams. Back-patch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
| |
My previous commit disallowed this operation, but did nothing about
cleaning up the damage if one had already been done. With the operation
disallowed, it's okay to just forcibly clear xmax in a sequence's tuple,
since any value seen there could not represent a live transaction's lock.
So, any sequence-specific operation will repair the problem automatically,
whether or not the user has already seen "could not access status of
transaction" failures.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We can't allow this because such an operation stores its transaction XID
into the sequence tuple's xmax. Because VACUUM doesn't process sequences
(and we don't want it to start doing so), such an xmax value won't get
frozen, meaning it will eventually refer to nonexistent pg_clog storage,
and even wrap around completely. Since the row lock is ignored by nextval
and setval, the usefulness of the operation is highly debatable anyway.
Per reports of trouble with pgpool 3.0, which had ill-advisedly started
using such commands as a form of locking.
In HEAD, also disallow SELECT FOR UPDATE/SHARE on toast tables. Although
this does work safely given the current implementation, there seems no
good reason to allow it. I refrained from changing that behavior in
back branches, however.
|
| |
|
|
|
|
|
|
|
|
| |
Apparently sane-looking penalty code might return small negative values,
for example because of roundoff error. This will confuse places like
gistchoose(). Prevent problems by clamping negative penalty values to
zero. (Just to be really sure, I also made it force NaNs to zero.)
Back-patch to all supported branches.
Alexander Korotkov
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Even though our existing code for handling credentials control messages has
been basically unchanged since 2001, it was fundamentally wrong: it did not
ensure proper alignment of the supplied buffer, and it was calculating
buffer sizes and message sizes incorrectly. This led to failures on
platforms where alignment padding is relevant, for instance FreeBSD on
64-bit platforms, as seen in a recent Debian bug report passed on by
Martin Pitt (http://bugs.debian.org//cgi-bin/bugreport.cgi?bug=612888).
Rewrite to do the message-whacking using the macros specified in RFC 2292,
following a suggestion from Theo de Raadt in that thread. Tested by me
on Debian/kFreeBSD-amd64; since OpenBSD and NetBSD document the identical
CMSG API, it should work there too.
Back-patch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When we added the ability for vacuum to skip heap pages by consulting the
visibility map, we made it just not update the reltuples/relpages
statistics if it skipped any pages. But this could leave us with extremely
out-of-date stats for a table that contains any unchanging areas,
especially for TOAST tables which never get processed by ANALYZE. In
particular this could result in autovacuum making poor decisions about when
to process the table, as in recent report from Florian Helmberger. And in
general it's a bad idea to not update the stats at all. Instead, use the
previous values of reltuples/relpages as an estimate of the tuple density
in unvisited pages. This approach results in a "moving average" estimate
of reltuples, which should converge to the correct value over multiple
VACUUM and ANALYZE cycles even when individual measurements aren't very
good.
This new method for updating reltuples is used by both VACUUM and ANALYZE,
with the result that we no longer need the grotty interconnections that
caused ANALYZE to not update the stats depending on what had happened
in the parent VACUUM command.
Also, fix the logic for skipping all-visible pages during VACUUM so that it
looks ahead rather than behind to decide what to do, as per a suggestion
from Greg Stark. This eliminates useless scanning of all-visible pages at
the start of the relation or just after a not-all-visible page. In
particular, the first few pages of the relation will not be invariably
included in the scanned pages, which seems to help in not overweighting
them in the reltuples estimate.
Back-patch to 8.4, where the visibility map was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
parse_xml_decl's header comment says you can pass NULL for any unwanted
output parameter, but it failed to honor this contract for the "standalone"
flag. The only currently-affected caller is xml_recv, so the net effect is
that sending a binary XML value containing a standalone parameter in its
xml declaration would crash the backend. Per bug #6044 from Christopher
Dillard.
In passing, remove useless initializations of parse_xml_decl's output
parameters in xml_parse.
Back-patch to 8.3, where this code was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We had some hacks in ruleutils.c to cope with various odd transformations
that the optimizer could do on a CASE foo WHEN "CaseTestExpr = RHS" clause.
However, the fundamental impossibility of covering all cases was exposed
by Heikki, who pointed out that the "=" operator could get replaced by an
inlined SQL function, which could contain nearly anything at all. So give
up on the hacks and just print the expression as-is if we fail to recognize
it as "CaseTestExpr = RHS". (We must cover that case so that decompiled
rules print correctly; but we are not under any obligation to make EXPLAIN
output be 100% valid SQL in all cases, and already could not do so in some
other cases.) This approach requires that we have some printable
representation of the CaseTestExpr node type; I used "CASE_TEST_EXPR".
Back-patch to all supported branches, since the problem case fails in all.
|
| |
|
|
|
|
| |
Found with additional valgrind testing.
Noah Misch
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
convert_tuples_by_position was rejecting attempts to coerce a record field
with -1 typmod to the same type with a non-default typmod. This is in fact
the "correct" thing to do (since we're just going to do a type relabeling,
not invoke any length-conversion cast function); but it results in
rejecting valid cases like bug #6020, because the source record's tupdesc
is built from Params that don't have typmod assigned. Since that's a
regression from previous versions, which accepted this code, we have to do
something about it. In HEAD, I've fixed the problem properly by causing
the Params to receive the correct typmods; but the potential for incidental
behavioral changes seems high enough to make it unattractive to make the
same change in released branches. (And it couldn't be fixed that way in
8.4 anyway...) Hence this patch just modifies convert_tuples_by_position
to not complain if either the input or the output tupdesc has typmod -1.
This is still a shade tighter checking than we did before 9.0, since before
that plpgsql failed to consider typmods at all when checking record
compatibility. (convert_tuples_by_position is currently used only by
plpgsql, so we're not affecting other behavior.)
Back-patch to 8.4, since we recently back-ported convert_tuples_by_position
into that branch.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The planner can sometimes compute very large values for numGroups, and in
cases where we have no alternative to building a hashtable, such a value
will get fed directly to BuildTupleHashTable as its nbuckets parameter.
There were two ways in which that could go bad. First, BuildTupleHashTable
declared the parameter as "int" but most callers were passing "long"s,
so on 64-bit machines undetected overflow could occur leading to a bogus
negative value. The obvious fix for that is to change the parameter to
"long", which is what I've done in HEAD. In the back branches that seems a
bit risky, though, since third-party code might be calling this function.
So for them, just put in a kluge to treat negative inputs as INT_MAX.
Second, hash_create can go nuts with extremely large requested table sizes
(notably, my_log2 becomes an infinite loop for inputs larger than
LONG_MAX/2). What seems most appropriate to avoid that is to bound the
initial table size request to work_mem.
This fixes bug #6035 reported by Daniel Schreiber. Although the reported
case only occurs back to 8.4 since it involves WITH RECURSIVE, I think
it's a good idea to install the defenses in all supported branches.
|
| |
|
|
|
| |
It's been like this since the seg module was introduced, so backpatch to
8.2 which is the oldest supported version.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The code to assemble ldap_get_values_len's output into a single string
wrote the terminating null one byte past where it should. Fix that,
and make some other cosmetic adjustments to make the code a trifle more
readable and more in line with usual Postgres coding style.
Also, free the "result" string when done with it, to avoid a permanent
memory leak.
Bug report and patch by Albe Laurenz, cosmetic adjustments by me.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
After finding an EXISTS or ANY sub-select that can be converted to a
semi-join or anti-join, we should recurse into the body of the sub-select.
This allows cases such as EXISTS-within-EXISTS to be optimized properly.
The original coding would leave the lower sub-select as a SubLink, which
is no better and often worse than what we can do with a join. Per example
from Wayne Conrad.
Back-patch to 8.4. There is a related issue in older versions' handling
of pull_up_IN_clauses, but they're lame enough anyway about the whole area
that it seems not worth the extra work to try to fix.
|
