aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
...
* Allow FOR EACH ROW triggers on partitioned tablesAlvaro Herrera2018-03-23
| | | | | | | | | | | | | | | Previously, FOR EACH ROW triggers were not allowed in partitioned tables. Now we allow AFTER triggers on them, and on trigger creation we cascade to create an identical trigger in each partition. We also clone the triggers to each partition that is created or attached later. This means that deferred unique keys are allowed on partitioned tables, too. Author: Álvaro Herrera Reviewed-by: Peter Eisentraut, Simon Riggs, Amit Langote, Robert Haas, Thomas Munro Discussion: https://postgr.es/m/20171229225319.ajltgss2ojkfd3kp@alvherre.pgsql
* pg_resetwal: Add simple test suitePeter Eisentraut2018-03-23
| | | | | Some subsequent patches will add to this, but to avoid conflicts, set up the basics separately.
* Adapt expression JIT to stdbool.h introduction.Andres Freund2018-03-22
| | | | | | | | | | | | | | | | The LLVM JIT provider uses clang to synchronize types between normal C code and runtime generated code. Clang represents stdbool.h style booleans in return values & parameters differently from booleans stored in variables. Thus the expression compilation code from 2a0faed9d needs to be adapted to 9a95a77d9. Instead of hardcoding i8 as the type for booleans (which already was wrong on some edge case platforms!), use postgres' notion of a boolean as used for storage and for parameters. Per buildfarm animal xenodermus. Author: Andres Freund
* Fix whitespacePeter Eisentraut2018-03-22
|
* Remove stdbool workaround in sepgsqlPeter Eisentraut2018-03-22
| | | | | | | | | Since we now use stdbool.h in c.h, this workaround breaks the build and is no longer necessary, so remove it. (Technically, there could be platforms with a 4-byte bool in stdbool.h, in which case we would not include stdbool.h in c.h, and so the old problem that caused this workaround would reappear. But this combination is not known to happen on the range of platforms where sepgsql can be built.)
* Use stdbool.h if suitablePeter Eisentraut2018-03-22
| | | | | | | | | | | | | | | | | | Using the standard bool type provided by C allows some recent compilers and debuggers to give better diagnostics. Also, some extension code and third-party headers are increasingly pulling in stdbool.h, so it's probably saner if everyone uses the same definition. But PostgreSQL code is not prepared to handle bool of a size other than 1, so we keep our own old definition if we encounter a stdbool.h with a bool of a different size. (Among current build farm members, this only applies to old macOS versions on PowerPC.) To check that the used bool is of the right size, add a static assertions about size of GinTernaryValue vs bool. This is currently the only place that assumes that bool and char are of the same size. Discussion: https://www.postgresql.org/message-id/flat/3a0fe7e1-5ed1-414b-9230-53bbc0ed1f49@2ndquadrant.com
* Add expression compilation support to LLVM JIT provider.Andres Freund2018-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In addition to the interpretation of expressions (which back evaluation of WHERE clauses, target list projection, aggregates transition values etc) support compiling expressions to native code, using the infrastructure added in earlier commits. To avoid duplicating a lot of code, only support emitting code for cases that are likely to be performance critical. For expression steps that aren't deemed that, use the existing interpreter. The generated code isn't great - some architectural changes are required to address that. But this already yields a significant speedup for some analytics queries, particularly with WHERE clauses filtering a lot, or computing multiple aggregates. Author: Andres Freund Tested-By: Thomas Munro Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de Disable JITing for VALUES() nodes. VALUES() nodes are only ever executed once. This is primarily helpful for debugging, when forcing JITing even for cheap queries. Author: Andres Freund Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
* Add FIELDNO_* macro designating offset into structs required for JIT.Andres Freund2018-03-22
| | | | | | | | | | | | | | | | For any interesting JIT target, fields inside structs need to be accessed. b96d550e contains infrastructure for syncing the definition of types between postgres C code and runtime code generation with LLVM. But that doesn't sync the number or names of fields inside structs, just the types (including padding etc). One option would be to hardcode the offset numbers in the JIT code, but that'd be hard to keep in sync. Instead add macros indicating the field offset to the fields that need to be accessed. Not pretty, but manageable. Author: Andres Freund Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
* Expand list of synchronized types and functions in LLVM JIT provider.Andres Freund2018-03-22
| | | | | Author: Andres Freund Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
* Improve style guideline compliance of assorted error-report messages.Tom Lane2018-03-22
| | | | | | | | | | | | Per the project style guide, details and hints should have leading capitalization and end with a period. On the other hand, errcontext should not be capitalized and should not end with a period. To support well formatted error contexts in dblink, extend dblink_res_error() to take a format+arguments rather than a hardcoded string. Daniel Gustafsson Discussion: https://postgr.es/m/B3C002C8-21A0-4F53-A06E-8CAB29FCF295@yesql.se
* Consider Parallel Append of partial paths for UNION [ALL].Robert Haas2018-03-22
| | | | | | | | | | | | | | | | Without this patch, we can implement a UNION or UNION ALL as an Append where Gather appears beneath one or more of the Append branches, but this lets us put the Gather node on top, with a partial path for each relation underneath. There is considerably more work that could be done to improve planning in this area, but that will probably need to wait for a future release. Patch by me, reviewed and tested by Ashutosh Bapat and Rajkumar Raghuwanshi. Discussion: http://postgr.es/m/CA+TgmoaLRAOqHmMZx=ESM3VDEPceg+-XXZsRXQ8GtFJO_zbMSw@mail.gmail.com
* Sync up our various ways of estimating pg_class.reltuples.Tom Lane2018-03-22
| | | | | | | | | | | | | | | | | | | | | | | | VACUUM thought that reltuples represents the total number of tuples in the relation, while ANALYZE counted only live tuples. This can cause "flapping" in the value when background vacuums and analyzes happen separately. The planner's use of reltuples essentially assumes that it's the count of live (visible) tuples, so let's standardize on having it mean live tuples. Another issue is that the definition of "live tuple" isn't totally clear; what should be done with INSERT_IN_PROGRESS or DELETE_IN_PROGRESS tuples? ANALYZE's choices in this regard are made on the assumption that if the originating transaction commits at all, it will happen after ANALYZE finishes, so we should ignore the effects of the in-progress transaction --- unless it is our own transaction, and then we should count it. Let's propagate this definition into VACUUM, too. Likewise propagate this definition into CREATE INDEX, and into contrib/pgstattuple's pgstattuple_approx() function. Tomas Vondra, reviewed by Haribabu Kommi, some corrections by me Discussion: https://postgr.es/m/16db4468-edfa-830a-f921-39a50498e77e@2ndquadrant.com
* Basic planner and executor integration for JIT.Andres Freund2018-03-22
| | | | | | | | | | | | | | | | | | | | | This adds simple cost based plan time decision about whether JIT should be performed. jit_above_cost, jit_optimize_above_cost are compared with the total cost of a plan, and if the cost is above them JIT is performed / optimization is performed respectively. For that PlannedStmt and EState have a jitFlags (es_jit_flags) field that stores information about what JIT operations should be performed. EState now also has a new es_jit field, which can store a JitContext. When there are no errors the context is released in standard_ExecutorEnd(). It is likely that the default values for jit_[optimize_]above_cost will need to be adapted further, but in my test these values seem to work reasonably. Author: Andres Freund, with feedback by Peter Eisentraut Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
* Add helpers for emitting LLVM IR.Andres Freund2018-03-22
| | | | | | | | These basically just help to make code a bit more concise and pgindent proof. Author: Andres Freund Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
* Debugging and profiling support for LLVM JIT provider.Andres Freund2018-03-22
| | | | | | | | | This currently requires patches to the LLVM codebase to be effective (submitted upstream), the GUCs are available without those patches however. Author: Andres Freund Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
* Support for optimizing and emitting code in LLVM JIT provider.Andres Freund2018-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit introduces the ability to actually generate code using LLVM. In particular, this adds: - Ability to emit code both in heavily optimized and largely unoptimized fashion - Batching facility to allow functions to be defined in small increments, but optimized and emitted in executable form in larger batches (for performance and memory efficiency) - Type and function declaration synchronization between runtime generated code and normal postgres code. This is critical to be able to access struct fields etc. - Developer oriented jit_dump_bitcode GUC, for inspecting / debugging the generated code. - per JitContext statistics of number of functions, time spent generating code, optimizing, and emitting it. This will later be employed for EXPLAIN support. This commit doesn't yet contain any code actually generating functions. That'll follow in later commits. Documentation for GUCs added, and for JIT in general, will be added in later commits. Author: Andres Freund, with contributions by Pierre Ducroquet Testing-By: Thomas Munro, Peter Eisentraut Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
* Avoid creating a TOAST table for a partitioned table.Robert Haas2018-03-22
| | | | | | | | It's useless. Amit Langote Discussion: http://postgr.es/m/b4c9dee6-d134-49b8-79c4-07fbd7c3b898@lab.ntt.co.jp
* Fix typo in comment.Robert Haas2018-03-22
| | | | | | Michael Paquier Discussion: http://postgr.es/m/20180205071404.GB17337@paquier.xyz
* doc: Update parallel join documentation for Parallel Shared Hash.Robert Haas2018-03-22
| | | | | | Thomas Munro Discussion: http://postgr.es/m/CAEepm=3XdL=+bn3=WQVCCT5wwfAEv-4onKpk+XQZdwDXv6etzA@mail.gmail.com
* Fix tuple counting in SP-GiST index build.Tom Lane2018-03-22
| | | | | | | | | | | | Count the number of tuples in the index honestly, instead of assuming that it's the same as the number of tuples in the heap. (It might be different if the index is partial.) Back-patch to all supported versions. Tomas Vondra Discussion: https://postgr.es/m/3b3d8eac-c709-0d25-088e-b98339a1b28a@2ndquadrant.com
* Call pgstat_report_activity() in parallel CREATE INDEX workers.Robert Haas2018-03-22
| | | | | | | | | | Also set debug_query_string. Oversight in commit 9da0cc35284bdbe8d442d732963303ff0e0a40bc Peter Geoghegan, per a report by Phil Florent. Discussion: https://postgr.es/m/CAH2-Wzmf-34hD4n40uTuE-ZY9P5c%2BmvhFbCdQfN%3DKrKiVm3j3A%40mail.gmail.com
* Fix errors in contrib/bloom index build.Tom Lane2018-03-22
| | | | | | | | | | | | | | | | | Count the number of tuples in the index honestly, instead of assuming that it's the same as the number of tuples in the heap. (It might be different if the index is partial.) Fix counting of tuples in current index page, too. This error would have led to failing to write out the final page of the index if it contained exactly one tuple, so that the last tuple of the relation would not get indexed. Back-patch to 9.6 where contrib/bloom was added. Tomas Vondra and Tom Lane Discussion: https://postgr.es/m/3b3d8eac-c709-0d25-088e-b98339a1b28a@2ndquadrant.com
* Implement partition-wise grouping/aggregation.Robert Haas2018-03-22
| | | | | | | | | | | | | | | | | | | | | If the partition keys of input relation are part of the GROUP BY clause, all the rows belonging to a given group come from a single partition. This allows aggregation/grouping over a partitioned relation to be broken down * into aggregation/grouping on each partition. This should be no worse, and often better, than the normal approach. If the GROUP BY clause does not contain all the partition keys, we can still perform partial aggregation for each partition and then finalize aggregation after appending the partial results. This is less certain to be a win, but it's still useful. Jeevan Chalke, Ashutosh Bapat, Robert Haas. The larger patch series of which this patch is a part was also reviewed and tested by Antonin Houska, Rajkumar Raghuwanshi, David Rowley, Dilip Kumar, Konstantin Knizhnik, Pascal Legrand, and Rafia Sabih. Discussion: http://postgr.es/m/CAM2+6=V64_xhstVHie0Rz=KPEQnLJMZt_e314P0jaT_oJ9MR8A@mail.gmail.com
* Add conditional.c to libpgfeutils for MSVC buildTeodor Sigaev2018-03-22
| | | | | | | conditional.c was moved in f67b113ac62777d18cd20d3c4d05be964301b936 commit but forgotten to add to Windows build system. I don't have a Windows box, so blind attempt.
* UINT64CONST'fy long constants in pgbenchTeodor Sigaev2018-03-22
| | | | | | | In commit e51a04840a1c45db101686bef0b7025d5014c74b it was missed 64-bit constants, wrap them with UINT64CONST(). Per buildfarm member dromedary and gripe from Tom Lane
* Add \if support to pgbenchTeodor Sigaev2018-03-22
| | | | | | | | | Patch adds \if to pgbench as it done for psql. Implementation shares condition stack code with psql, so, this code is moved to fe_utils directory. Author: Fabien COELHO with minor editorization by me Review by: Vik Fearing, Fedor Sigaev Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.20.1711252200190.28523@lancre
* Improve ANALYZE's strategy for finding MCVs.Dean Rasheed2018-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, a value was included in the MCV list if its frequency was 25% larger than the estimated average frequency of all nonnull values in the table. For uniform distributions, that can lead to values being included in the MCV list and significantly overestimated on the basis of relatively few (sometimes just 2) instances being seen in the sample. For non-uniform distributions, it can lead to too few values being included in the MCV list, since the overall average frequency may be dominated by a small number of very common values, while the remaining values may still have a large spread of frequencies, causing both substantial overestimation and underestimation of the remaining values. Furthermore, increasing the statistics target may have little effect because the overall average frequency will remain relatively unchanged. Instead, populate the MCV list with the largest set of common values that are statistically significantly more common than the average frequency of the remaining values. This takes into account the variance of the sample counts, which depends on the counts themselves and on the proportion of the table that was sampled. As a result, it constrains the relative standard error of estimates based on the frequencies of values in the list, reducing the chances of too many values being included. At the same time, it allows more values to be included, since the MCVs need only be more common than the remaining non-MCVs, rather than the overall average. Thus it tends to produce fewer MCVs than the previous code for uniform distributions, and more for non-uniform distributions, reducing estimation errors in both cases. In addition, the algorithm responds better to increasing the statistics target, allowing more values to be included in the MCV list when more of the table is sampled. Jeff Janes, substantially modified by me. Reviewed by John Naylor and Tomas Vondra. Discussion: https://postgr.es/m/CAMkU=1yvdGvW9TmiLAhz2erFnvnPFYHbOZuO+a=4DVkzpuQ2tw@mail.gmail.com
* Add file containing extensions of the LLVM C API.Andres Freund2018-03-21
| | | | | Author: Andres Freund Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
* Basic JIT provider and error handling infrastructure.Andres Freund2018-03-21
| | | | | | | | | | | | | | | | | | | | This commit introduces: 1) JIT provider abstraction, which allows JIT functionality to be implemented in separate shared libraries. That's desirable because it allows to install JIT support as a separate package, and because it allows experimentation with different forms of JITing. 2) JITContexts which can be, using functions introduced in follow up commits, used to emit JITed functions, and have them be cleaned up on error. 3) The outline of a LLVM JIT provider, which will be fleshed out in subsequent commits. Documentation for GUCs added, and for JIT in general, will be added in later commits. Author: Andres Freund, with architectural input from Jeff Davis Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
* Fix typo in BITCODE_CXXFLAGS assignment.Andres Freund2018-03-21
| | | | | Typoed-In: 5b2526c83832e Reported-By: Catalin Iacob
* Empty CXXFLAGS inherited from autoconf.Andres Freund2018-03-21
| | | | | | We do the same for CFLAGS. This was an omission in 6869b4f25. Reported-By: Catalin Iacob
* Prevent extensions from creating custom GUCs that are GUC_LIST_QUOTE.Tom Lane2018-03-21
| | | | | | | | | | | | Pending some solution for the problems noted in commit 742869946, disallow dynamic creation of GUC_LIST_QUOTE variables. If there are any extensions out there using this feature, they'd not be happy for us to start enforcing this rule in minor releases, so this is a HEAD-only change. The previous commit didn't make things any worse than they already were for such cases. Discussion: https://postgr.es/m/20180111064900.GA51030@paquier.xyz
* Fix mishandling of quoted-list GUC values in pg_dump and ruleutils.c.Tom Lane2018-03-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Code that prints out the contents of setconfig or proconfig arrays in SQL format needs to handle GUC_LIST_QUOTE variables differently from other ones, because for those variables, flatten_set_variable_args() already applied a layer of quoting. The value can therefore safely be printed as-is, and indeed must be, or flatten_set_variable_args() will muck it up completely on reload. For all other GUC variables, it's necessary and sufficient to quote the value as a SQL literal. We'd recognized the need for this long ago, but mis-analyzed the need slightly, thinking that all GUC_LIST_INPUT variables needed the special treatment. That's actually wrong, since a valid value of a LIST variable might include characters that need quoting, although no existing variables accept such values. More to the point, we hadn't made any particular effort to keep the various places that deal with this up-to-date with the set of variables that actually need special treatment, meaning that we'd do the wrong thing with, for example, temp_tablespaces values. This affects dumping of SET clauses attached to functions, as well as ALTER DATABASE/ROLE SET commands. In ruleutils.c we can fix it reasonably honestly by exporting a guc.c function that allows discovering the flags for a given GUC variable. But pg_dump doesn't have easy access to that, so continue the old method of having a hard-wired list of affected variable names. At least we can fix it to have just one list not two, and update the list to match current reality. A remaining problem with this is that it only works for built-in GUC variables. pg_dump's list obvious knows nothing of third-party extensions, and even the "ask guc.c" method isn't bulletproof since the relevant extension might not be loaded. There's no obvious solution to that, so for now, we'll just have to discourage extension authors from inventing custom GUCs that need GUC_LIST_QUOTE. This has been busted for a long time, so back-patch to all supported branches. Michael Paquier and Tom Lane, reviewed by Kyotaro Horiguchi and Pavel Stehule Discussion: https://postgr.es/m/20180111064900.GA51030@paquier.xyz
* Improve predtest.c's handling of cases with NULL-constant inputs.Tom Lane2018-03-21
| | | | | | | | | | | | | | | | | | | | Currently, if operator_predicate_proof() is given an operator clause like "something op NULL", it just throws up its hands and reports it can't prove anything. But we can often do better than that, if the operator is strict, because then we know that the clause returns NULL overall. Depending on whether we're trying to prove or refute something, and whether we need weak or strong semantics for NULL, this may be enough to prove the implication, especially when we rely on the standard rule that "false implies anything". In particular, this lets us do something useful with questions like "does X IN (1,3,5,NULL) imply X <= 5?" The null entry in the IN list can effectively be ignored for this purpose, but the proof rules were not previously smart enough to deduce that. This patch is by me, but it owes something to previous work by Amit Langote to try to solve problems of the form mentioned. Thanks also to Emre Hasegeli and Ashutosh Bapat for review. Discussion: https://postgr.es/m/3bad48fc-f257-c445-feeb-8a2b2fb622ba@lab.ntt.co.jp
* Change oddly-chosen OID allocation.Tom Lane2018-03-21
| | | | | | | | | | | | I noticed while fooling with John Naylor's bootstrap-data patch that we had one high-numbered manually assigned OID, 8888, which evidently came from a submission that the committer didn't bother to bring into line with usual OID allocation practices before committing. That's a bad idea, because it creates a hazard for other patches that may be temporarily using high OID numbers. Change it to something more in line with what we usually do. This evidently dates to commit abb173392. It's too late to change it in released branches, but we can fix it in HEAD.
* pg_controldata: Prevent division-by-zero errorsPeter Eisentraut2018-03-21
| | | | | | | | | | | | | If the control file is corrupted and specifies the WAL segment size to be 0 bytes, calculating the latest checkpoint's REDO WAL file will fail with a division-by-zero error. Show it as "???" instead. Also reword the warning message a bit and send it to stdout, like the other pre-existing warning messages. Add some tests for dealing with a corrupted pg_control file. Author: Nathan Bossart <bossartn@amazon.com>, tests by me
* Fix relcache handling of the 'default' partitionAlvaro Herrera2018-03-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | My commit 4dba331cb3dc that moved around CommandCounterIncrement calls in partitioning DDL code unearthed a problem with the relcache handling for the 'default' partition: the construction of a correct relcache entry for the partitioned table was at the mercy of lack of CCI calls in non-trivial amounts of code. This was prone to creating problems later on, as the code develops. This was visible as a test failure in a compile with RELCACHE_FORCE_RELASE (buildfarm member prion). The problem is that after the mentioned commit it was possible to create a relcache entry that had incomplete information regarding the default partition because I introduced a CCI between adding the catalog entries for the default partition (StorePartitionBound) and the update of pg_partitioned_table entry for its parent partitioned table (update_default_partition_oid). It seems the best fix is to move the latter so that it occurs inside the former; the purposeful lack of intervening CCI should be more obvious, and harder to break. I also remove a check in RelationBuildPartitionDesc that returns NULL if the key is not set. I couldn't find any place that needs this hack anymore; probably it was required because of bugs that have since been fixed. Fix a few typos I noticed while reviewing the code involved. Discussion: https://postgr.es/m/20180320182659.nyzn3vqtjbbtfgwq@alvherre.pgsql
* Add general purpose hasing functions to pgbench.Teodor Sigaev2018-03-21
| | | | | | | | | Hashing function is useful for simulating real-world workload in test like WEB workload, as an example - YCSB benchmarks. Author: Ildar Musin with minor editorization by me Reviewed by: Fabien Coelho, me Discussion: https://www.postgresql.org/message-id/flat/0e8bd39e-dfcd-2879-f88f-272799ad7ef2@postgrespro.ru
* Fix typo.Tatsuo Ishii2018-03-21
| | | | Patch by me.
* Handle heap rewrites even better in logical decodingPeter Eisentraut2018-03-21
| | | | | | | | | | | | | | | | | Logical decoding should not publish anything about tables created as part of a heap rewrite during DDL. Those tables don't exist externally, so consumers of logical decoding cannot do anything sensible with that information. In ab28feae2bd3d4629bd73ae3548e671c57d785f0, we worked around this for built-in logical replication, but that was hack. This is a more proper fix: We mark such transient heaps using the new field pg_class.relwrite, linking to the original relation OID. By default, we ignore them in logical decoding before they get to the output plugin. Optionally, a plugin can register their interest in getting such changes, if they handle DDL specially, in which case the new field will help them get information about the actual table. Reviewed-by: Craig Ringer <craig@2ndquadrant.com>
* Add strict_word_similarity to pg_trgm moduleTeodor Sigaev2018-03-21
| | | | | | | | | strict_word_similarity is similar to existing word_similarity function but it takes into account word boundaries to compute similarity. Author: Alexander Korotkov Review by: David Steele, Liudmila Mantrova, me Discussion: https://www.postgresql.org/message-id/flat/CY4PR17MB13207ED8310F847CF117EED0D85A0@CY4PR17MB1320.namprd17.prod.outlook.com
* Add configure tests for stdbool.h and sizeof boolPeter Eisentraut2018-03-21
| | | | | | | | This will allow us to assess how many platforms have bool with a size other than 1, which will help us decide how to go forward with using stdbool.h. Discussion: https://www.postgresql.org/message-id/flat/3a0fe7e1-5ed1-414b-9230-53bbc0ed1f49@2ndquadrant.com
* Repair crash with unsortable grouping sets.Andrew Gierth2018-03-21
| | | | | | | | | | | If there were multiple grouping sets, none of them empty, all of which were unsortable, then an oversight in consider_groupingsets_paths led to a null pointer dereference. Fix, and add a regression test for this case. Per report from Dang Minh Huong, though I didn't use their patch. Backpatch to 10.x where hashed grouping sets were added.
* Rework word_similarity documentation, make it close to actual algorithm.Teodor Sigaev2018-03-21
| | | | | | | | | | | | word_similarity before claimed as returning similarity of closest word in string, but, actually it returns similarity of substring. Also fix mistyped comments. Author: Alexander Korotkov Review by: David Steele, Liudmila Mantrova Discussionis: https://www.postgresql.org/message-id/flat/CY4PR17MB13207ED8310F847CF117EED0D85A0@CY4PR17MB1320.namprd17.prod.outlook.com https://www.postgresql.org/message-id/flat/f43b242d-000c-f4c8-cb8b-d37e9752cd93%40postgrespro.ru
* doc: Small wording improvementPeter Eisentraut2018-03-21
|
* Handle EEOP_FUNCEXPR_[STRICT_]FUSAGE out of line.Andres Freund2018-03-20
| | | | | | | This isn't a very common op, and it doesn't seem worth duplicating for JIT. Author: Andres Freund
* Add configure infrastructure (--with-llvm) to enable LLVM support.Andres Freund2018-03-20
| | | | | | | | | | | | LLVM will be used for *optional* Just-in-time compilation support. This commit just adds the configure infrastructure that detects LLVM. No documentation has been added for the --with-llvm flag, that'll be added after the actual supporting code has been added. Author: Andres Freund Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
* Add C++ support to configure.Andres Freund2018-03-20
| | | | | | | | | | | | | | This is an optional dependency. It'll be used for the upcoming LLVM based just in time compilation support, which needs to wrap a few LLVM C++ APIs so they're accessible from C.. For now test for C++ compilers unconditionally, without failing if not present, to ensure wide buildfarm coverage. If we're bothered by the additional test times (which are quite short) or verbosity, we can later make the tests conditional on --with-llvm. Author: Andres Freund Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
* Attempt to fix build with unusual OpenSSL versionsPeter Eisentraut2018-03-20
| | | | | | | | | | | | | | Since e3bdb2d92600ed45bd46aaf48309a436a9628218, libpq failed to build on some platforms because they did not have SSL_clear_options(). Although mainline OpenSSL introduced SSL_clear_options() after SSL_OP_NO_COMPRESSION, so the code should have built fine, at least an old NetBSD version (build farm "coypu" NetBSD 5.1 gcc 4.1.3 PR-20080704 powerpc) has SSL_OP_NO_COMPRESSION but no SSL_clear_options(). So add a configure check for SSL_clear_options(). If we don't find it, skip the call. That means on such a platform one cannot *enable* SSL compression if the built-in default is off, but that seems an unlikely combination anyway and not very interesting in practice.
* Add PGAC_PROG_VARCC_VARFLAGS_OPT autoconf macro.Andres Freund2018-03-20
| | | | | | | | | | | | | The new macro allows to test flags for different compilers and to store them in different CFLAG like variables. The existing PGAC_PROG_CC_CFLAGS_OPT and PGAC_PROG_CC_VAR_OPT are changed to be just wrappers around the new function. This'll be used by the upcoming LLVM support, to separately detect capabilities used by clang, when generating bitcode. Author: Andres Freund Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-05 15:18:50 +0000