| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
During logical decoding, we advance catalog_xmin of logical too early in
fast_forward mode, resulting in required catalog data being removed by
vacuum. This mode is normally used to advance the slot without processing
the changes, but we still can't let the slot's xmin to advance to an
incorrect value.
Commit f49a80c481 fixed a similar issue where the logical slot's
catalog_xmin was getting advanced prematurely during non-fast-forward
mode. During xl_running_xacts processing, instead of directly advancing
the slot's xmin to the oldest running xid in the record, it allowed the
xmin to be held back for snapshots that can be used for
not-yet-replayed transactions, as those might consider older txns as
running too. However, it missed the fact that the same problem can happen
during fast_forward mode decoding, as we won't build a base snapshot in
that mode, and the future call to get_changes from the same slot can miss
seeing the required catalog changes leading to incorrect reslts.
This commit allows building the base snapshot even in fast_forward mode to
prevent the early advancement of xmin.
Reported-by: Amit Kapila <amit.kapila16@gmail.com>
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/CAA4eK1LqWncUOqKijiafe+Ypt1gQAQRjctKLMY953J79xDBgAg@mail.gmail.com
Discussion: https://postgr.es/m/OS0PR01MB57163087F86621D44D9A72BF94BB2@OS0PR01MB5716.jpnprd01.prod.outlook.com
|
| |
|
|
|
|
| |
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/CANhcyEXsObdjkjxEnq10aJumDpa5J6aiPzgTh_w4KCWRYHLw6Q@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit is a backpatch of commit 4909b38af0 for 13.
Data loss can happen when the DDLs like ALTER PUBLICATION ... ADD TABLE ...
or ALTER TYPE ... that don't take a strong lock on table happens
concurrently to DMLs on the tables involved in the DDL. This happens
because logical decoding doesn't distribute invalidations to concurrent
transactions and those transactions use stale cache data to decode the
changes. The problem becomes bigger because we keep using the stale cache
even after those in-progress transactions are finished and skip the
changes required to be sent to the client.
This commit fixes the issue by distributing invalidation messages from
catalog-modifying transactions to all concurrent in-progress transactions.
This allows the necessary rebuild of the catalog cache when decoding new
changes after concurrent DDL.
The fix for 13 is different from what we did in branches 14 and above,
such that for 13, the concurrent DDL changes (from DDL types mentioned
earlier) will be visible for any newly started transactions. To make them
visible in concurrent transactions, we need to introduce a new change type
REORDER_BUFFER_CHANGE_INVALIDATION, already present in branches 14 and
greater. We decided not to take the risk of a bigger change and fix the
issue partially in 13.
Reported-by: hubert depesz lubaczewski <depesz@depesz.com>
Reported-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Tested-by: Benoit Lobréau <benoit.lobreau@dalibo.com>
Discussion: https://postgr.es/m/de52b282-1166-1180-45a2-8d8917ca74c6@enterprisedb.com
Discussion: https://postgr.es/m/CAD21AoAenVqiMjpN-PvGHL1N9DWnHSq673bfgr6phmBUzx=kLQ@mail.gmail.com
Discussion: https://postgr.es/m/CAD21AoAhU3kp8shYqP=ExiFDZ9sZxpFb5WzLa0p+vEe5j+7CWQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The original intent in heap_page_items() was to return nulls, not
throw an error or crash, if an item was sufficiently corrupt that
we couldn't safely extract data from it. However, commit d6061f83a
utterly missed that memo, and not only put in an un-length-checked
copy of the tuple's data section, but also managed to break the check
on sane nulls-bitmap length. Either mistake could possibly lead to
a SIGSEGV crash if the tuple is corrupt.
Bug: #18896
Reported-by: Dmitry Kovalenko <d.kovalenko@postgrespro.ru>
Author: Dmitry Kovalenko <d.kovalenko@postgrespro.ru>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18896-add267b8e06663e3@postgresql.org
Backpatch-through: 13
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 0f21db36d made an assumption that GIN triConsistentFns
would not modify their input entryRes[] arrays. But in fact,
the "shim" triConsistentFn that we use for opclasses that don't
supply their own did exactly that, potentially leading to wrong
answers from a GIN index search. Through bad luck, none of the
test cases that we have for such opclasses exposed the bug.
One response to this could be that the assumption of consistency check
functions not modifying entryRes[] arrays is a bad one, but it still
seems reasonable to me. Notably, shimTriConsistentFn is itself
assuming that with respect to the underlying boolean consistentFn,
so it's sure being self-centered in supposing that it gets to do so.
Fortunately, it's quite simple to fix shimTriConsistentFn to restore
the entry-time state of entryRes[], so let's do that instead.
This issue doesn't affect any core GIN opclasses, since they all
supply their own triConsistentFns. It does affect contrib modules
btree_gin, hstore, and intarray.
Along the way, I (tgl) noticed that shimTriConsistentFn failed to
pick up on a "recheck" flag returned by its first call to the boolean
consistentFn. This may be only a latent problem, since it would be
unlikely for a consistentFn to set recheck for the all-false case
and not any other cases. (Indeed, none of our contrib modules do
that.) Nonetheless, it's formally wrong.
Reported-by: Vinod Sridharan <vsridh90@gmail.com>
Author: Vinod Sridharan <vsridh90@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAFMdLD7XzsXfi1+DpTqTgrD8XU0i2C99KuF=5VHLWjx4C1pkcg@mail.gmail.com
Backpatch-through: 13
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This replaces dblink's blocking libpq calls, allowing cancellation and
allowing DROP DATABASE (of a database not involved in the query). Apart
from explicit dblink_cancel_query() calls, dblink still doesn't cancel
the remote side. The replacement for the blocking calls consists of
new, general-purpose query execution wrappers in the libpqsrv facility.
Out-of-tree extensions should adopt these.
The original commit d3c5f37dd543498cc7c678815d3921823beec9e9 did not
back-patch. Back-patch now to v16-v13, bringing coverage to all supported
versions. This back-patch omits the orignal's refactoring in postgres_fdw.
Discussion: https://postgr.es/m/20231122012945.74@rfd.leadboat.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Applying pg_freespacemap() to a relation lacking storage (such as a
view) caused an assertion failure, although there was no ill effect
in non-assert builds. Add an error check for that case.
Bug: #18866
Reported-by: Robins Tharakan <tharakan@gmail.com>
Author: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/18866-d68926d0f1c72d44@postgresql.org
Backpatch-through: 13
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fixes two distinct errors that both ultimately trace
to commit 71d60e2aa, which added the ats_modifiedcols field.
The more severe error is that ats_modifiedcols wasn't accounted for
in afterTriggerAddEvent's scanning loop that looks for a pre-existing
duplicate AfterTriggerSharedData. Thus, a new event could be
incorrectly matched to an AfterTriggerSharedData that has a different
value of ats_modifiedcols, resulting in the wrong tg_updatedcols
bitmap getting passed to the trigger whenever it finally gets fired.
We'd not noticed because (a) few triggers consult tg_updatedcols,
and (b) we had no tests exercising a case where such a trigger was
called as an AFTER trigger. In the test case added by this commit,
contrib/lo's trigger fails to remove a large object when expected
because (without this fix) it thinks the LO OID column hasn't changed.
The other problem was introduced by commit ce5aaea8c, which copied the
modified-columns bitmap into trigger-related storage. It made a copy
for every trigger event, whereas what we really want is to make a new
copy only when we make a new AfterTriggerSharedData entry. (We could
imagine adding extra logic to reduce the number of bitmap copies still
more, but it doesn't look worthwhile at the moment.) In a simple test
of an UPDATE of 10000000 rows with a single AFTER trigger, this thinko
roughly tripled the amount of memory consumed by the pending-triggers
data structures, from 160446744 to 480443440 bytes.
Fixing the first problem requires introducing a bms_equal() call into
afterTriggerAddEvent's scanning loop, which is slightly annoying from
a speed perspective. However, getting rid of the excessive bms_copy()
calls from the second problem balances that out; overall speed of
trigger operations is the same or slightly better, in my tests.
Discussion: https://postgr.es/m/3496294.1737501591@sss.pgh.pa.us
Backpatch-through: 13
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's possible that external code is calling smgrtruncate(). Any
external callers might like to consider the recent changes to
RelationTruncate(), but commit 38c579b0 should not have changed the
function prototype in the back-branches, per ABI stability policy.
Restore smgrtruncate()'s traditional argument list in the back-branches,
but make it a wrapper for a new function smgrtruncate2(). The three
callers in core can use smgrtruncate2() directly. In master (18-to-be),
smgrtruncate2() is effectively renamed to smgrtruncate(), so this wart
is cleaned up.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKG%2BThae6x6%2BjmQiuALQBT2Ae1ChjMh1%3DkMvJ8y_SBJZrvA%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
RelationTruncate() does three things, while holding an
AccessExclusiveLock and preventing checkpoints:
1. Logs the truncation.
2. Drops buffers, even if they're dirty.
3. Truncates some number of files.
Step 2 could previously be canceled if it had to wait for I/O, and step
3 could and still can fail in file APIs. All orderings of these
operations have data corruption hazards if interrupted, so we can't give
up until the whole operation is done. When dirty pages were discarded
but the corresponding blocks were left on disk due to ERROR, old page
versions could come back from disk, reviving deleted data (see
pgsql-bugs #18146 and several like it). When primary and standby were
allowed to disagree on relation size, standbys could panic (see
pgsql-bugs #18426) or revive data unknown to visibility management on
the primary (theorized).
Changes:
* WAL is now unconditionally flushed first
* smgrtruncate() is now called in a critical section, preventing
interrupts and causing PANIC on file API failure
* smgrtruncate() has a new parameter for existing fork sizes,
because it can't call smgrnblocks() itself inside a critical section
The changes apply to RelationTruncate(), smgr_redo() and
pg_truncate_visibility_map(). That last is also brought up to date with
other evolutions of the truncation protocol.
The VACUUM FileTruncate() failure mode had been discussed in older
reports than the ones referenced below, with independent analysis from
many people, but earlier theories on how to fix it were too complicated
to back-patch. The more recently invented cancellation bug was
diagnosed by Alexander Lakhin. Other corruption scenarios were spotted
by me while iterating on this patch and earlier commit 75818b3a.
Back-patch to all supported releases.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reported-by: rootcause000@gmail.com
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/18146-04e908c662113ad5%40postgresql.org
Discussion: https://postgr.es/m/18426-2d18da6586f152d6%40postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Maintain the pg_stat_user_indexes.idx_scan pgstat counter during
contrib/Bloom index scans.
Oversight in commit 9ee014fc, which added the Bloom index contrib
module.
Author: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/c48839d881388ee401a01807c686004d@oss.nttdata.com
Backpatch: 13- (all supported branches).
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The current code calls array_eq() and does not provide FmgrInfo. This commit
provides initialization of FmgrInfo and uses C collation as the safe option
for text comparison because we don't know anything about the semantics of
opclass options.
Backpatch to 13, where opclass options were introduced.
Reported-by: Nicolas Maus
Discussion: https://postgr.es/m/18692-72ea398df3ec6712%40postgresql.org
Backpatch-through: 13
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In existing releases of libxml2, xmlXPathCompile can be driven
to stack overflow because it fails to protect itself against
too-deeply-nested input. While there is an upstream fix as of
yesterday, it will take years for that to propagate into all
shipping versions. In the meantime, we can protect our own
usages basically for free by calling xmlXPathCtxtCompile instead.
(The actual bug is that libxml2 keeps its nesting counter in the
xmlXPathContext, and its parsing code was willing to just skip
counting nesting levels if it didn't have a context. So if we supply
a context, all is well. It seems odd actually that it works at all
to not supply a context, because this means that XPath parsing does
not have access to XML namespace info. Apparently libxml2 never
checks namespaces until runtime? Anyway, this seems like good
future-proofing even if its only immediate effect is to dodge a bug.)
Sadly, this hack only offers protection with libxml2 2.9.11 and newer.
Before that there are multiple similar problems, so if you are
processing untrusted XML it behooves you to get a newer version.
But we have some pretty old libxml2 in the buildfarm, so it seems
impractical to add a regression test to verify this fix.
Per bug #18617 from Jingzhou Fu. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/18617-1cee4d2ed1f4e7ae@postgresql.org
Discussion: https://gitlab.gnome.org/GNOME/libxml2/-/issues/799
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
I managed to break this test in two different ways in commit
05036a3155.
First, the output of the new call to tuple_data_split() on the test
sequence is dependent on endianness. This is fixed by setting a
special start value for the test sequence that produces the same
output regardless of the endianness of the machine.
Second, on versions older than v15, the new test case fails under
"force_parallel_mode = regress" with the following error:
ERROR: cannot access temporary tables during a parallel operation
This is because pageinspect's disk-accessing functions are
incorrectly marked PARALLEL SAFE on versions older than v15 (see
commit aeaaf520f4 for details). This one is fixed by changing the
test sequence to be permanent. The only reason it was previously
marked temporary was to avoid needing a DROP SEQUENCE command at
the end of the test. Unlike some other tests in this file, the use
of a permanent sequence here shouldn't result in any test
instability like what was fixed by commit e2933a6e11.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/ZuOKOut5hhDlf_bP%40nathan
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 4b82664156 restricted a number of functions provided by
contrib modules to only relations that use the "heap" table access
method. Sequences always use this table access method, but they do
not advertise as such in the pg_class system catalog, so the
aforementioned commit also (presumably unintentionally) removed
support for sequences from some of these functions. This commit
reintroduces said support for sequences to these functions and adds
a couple of relevant tests.
Co-authored-by: Ayush Vatsa
Reviewed-by: Robert Haas, Michael Paquier, Matthias van de Meent
Discussion: https://postgr.es/m/CACX%2BKaP3i%2Bi9tdPLjF5JCHVv93xobEdcd_eB%2B638VDvZ3i%3DcQA%40mail.gmail.com
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When pg_dump retrieves the list of database objects and performs the
data dump, there was possibility that objects are replaced with others
of the same name, such as views, and access them. This vulnerability
could result in code execution with superuser privileges during the
pg_dump process.
This issue can arise when dumping data of sequences, foreign
tables (only 13 or later), or tables registered with a WHERE clause in
the extension configuration table.
To address this, pg_dump now utilizes the newly introduced
restrict_nonsystem_relation_kind GUC parameter to restrict the
accesses to non-system views and foreign tables during the dump
process. This new GUC parameter is added to back branches too, but
these changes do not require cluster recreation.
Back-patch to all supported branches.
Reviewed-by: Noah Misch
Security: CVE-2024-7348
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When creating and initializing a logical slot, the restart_lsn is set
to the latest WAL insertion point (or the latest replay point on
standbys). Subsequently, WAL records are decoded from that point to
find the start point for extracting changes in the
DecodingContextFindStartpoint() function. Since the initial
restart_lsn could be in the middle of a transaction, the start point
must be a consistent point where we won't see the data for partial
transactions.
Previously, when not building a full snapshot, serialized snapshots
were restored, and the SnapBuild jumps to the consistent state even
while finding the start point. Consequently, the slot's restart_lsn
and confirmed_flush could be set to the middle of a transaction. This
could lead to various unexpected consequences. Specifically, there
were reports of logical decoding decoding partial transactions, and
assertion failures occurred because only subtransactions were decoded
without decoding their top-level transaction until decoding the commit
record.
To resolve this issue, the changes prevent restoring the serialized
snapshot and jumping to the consistent state while finding the start
point.
On v17 and HEAD, a flag indicating whether snapshot restores should be
skipped has been added to the SnapBuild struct, and SNAPBUILD_VERSION
has been bumpded.
On backbranches, the flag is stored in the LogicalDecodingContext
instead, preserving on-disk compatibility.
Backpatch to all supported versions.
Reported-by: Drew Callahan
Reviewed-by: Amit Kapila, Hayato Kuroda
Discussion: https://postgr.es/m/2444AA15-D21B-4CCE-8052-52C7C2DAFE5C%40amazon.com
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Backport the new BackgroundPsql modules and the constructor functions,
background_psql() and interactive_psql, to all supported
branches. That makes it easier to backpatch tests that use it.
BackgroundPsql was introduced in version 16. On version 16, this
commit backports just the new timeout argument from master (commit
334f512f45). On older branches, the whole facility. This includes the
change to `use warnings FATAL => 'all'`, which we haven't otherwise
backported, but it seems good to keep the file identical across
branches.
Discussion: https://www.postgresql.org/message-id/b7c64f20-ea01-4f15-9088-0cd6832af149@iki.fi
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, when considering LIMIT pushdown, postgres_fdw failed to
check whether the query has this clause, which led to pushing false
LIMIT clauses, causing incorrect results.
This clause has been supported since v13, so we need to do a
remote-version check before deciding that it will be safe to push such a
clause, but we do not currently have a way to do the check (without
accessing the remote server); disable pushing such a clause for now.
Oversight in commit 357889eb1. Back-patch to v13, where that commit
added the support.
Per bug #18467 from Onder Kalaci.
Patch by Japin Li, per a suggestion from Tom Lane, with some changes to
the comments by me. Review by Onder Kalaci, Alvaro Herrera, and me.
Discussion: https://postgr.es/m/18467-7bb89084ff03a08d%40postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This should have the same results for all practical purposes.
The advantage of selecting 'GMT' is that it's guaranteed to work
even when the remote system's timezone database is missing
entries, because pg_tzset() hard-wires handling of that,
at least in 9.2 and later.
(It seems like it would be a good idea to similarly hard-wire
correct handling of 'UTC', but that'll be a little more invasive
than I want to consider back-patching. Leave that for another
day when we're not in feature freeze.)
Per trouble report from Adnan Dautovic. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/465248.1712211585@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some functions are used in the tree and are currently marked as
deprecated by upstream. This commit refreshes the code to use the
recommended functions, leading to the following changes:
- xmlSubstituteEntitiesDefault() is gone, and needs to be replaced with
XML_PARSE_NOENT for the paths doing the parsing.
- xmlParseMemory() -> xmlReadMemory().
These functions, as well as more functions setting global states, have
been officially marked as deprecated by upstream in August 2022. Their
replacements exist since the 2001-ish area, as far as I have checked,
so that should be safe.
This has been originally applied as 65c5864d7fac without a backpatch,
and this has come up as well when working on 400928b83. Per request
from Tom Lane, for new buildfarm member indri that is able to see
deprecation warnings with xmlSubstituteEntitiesDefault() in 16 and older
stable branches.
Author: Dmitry Koval
Discussion: https://postgr.es/m/18274-98d16bc03520665f@postgresql.org
Discussion: https://postgr.es/m/1012981.1713222862@sss.pgh.pa.us
Bakpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
It might happen that the varlena value wasn't compressed by index_form_tuple()
due to current storage parameters. If compression is currently enabled, we
need to compress such values to match index tuple coming from the heap.
Backpatch to all supported versions.
Discussion: https://postgr.es/m/flat/7bdbe559-d61a-4ae4-a6e1-48abdf3024cc%40postgrespro.ru
Author: Andrey Borodin
Reviewed-by: Alexander Lakhin, Michael Zhilin, Jian He, Alexander Korotkov
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
In the heap, tuples may contain short varlena datum with both 1B header and 4B
headers. But the corresponding index tuple should always have such varlena's
with 1B headers. So, for fingerprinting, we need to convert.
Backpatch to all supported versions.
Discussion: https://postgr.es/m/flat/7bdbe559-d61a-4ae4-a6e1-48abdf3024cc%40postgrespro.ru
Author: Michael Zhilin
Reviewed-by: Alexander Lakhin, Andrey Borodin, Jian He, Alexander Korotkov
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For UNION ALL queries where a union child query contained a foreign
table, if the targetlist of that query contained a constant, and the
top-level query performed an ORDER BY which contained the column for the
constant value, then postgres_fdw would find the EquivalenceMember with
the Const and then try to produce an ORDER BY containing that Const.
This caused problems with INT typed Consts as these could appear to be
requests to order by an ordinal column position rather than the constant
value. This could lead to either an error such as:
ERROR: ORDER BY position <int const> is not in select list
or worse, if the constant value is a valid column, then we could just
sort by the wrong column altogether.
Here we fix this issue by just not including these Consts in the ORDER
BY clause.
In passing, add a new section for testing ORDER BY in the postgres_fdw
tests and move two existing tests which were misplaced in the WHERE
clause testing section into it.
Reported-by: Michał Kłeczek
Reviewed-by: Ashutosh Bapat, Richard Guo
Bug: #18381
Discussion: https://postgr.es/m/0714C8B8-8D82-4ABB-9F8D-A0C3657E7B6E%40kleczek.org
Discussion: https://postgr.es/m/18381-137456acd168bf93%40postgresql.org
Backpatch-through: 12, oldest supported version
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The code copying the PGP block into the temp buffer failed to
account for the extra 2 bytes in the buffer which are needed
for the prefix. If the block was oversized, subsequent checks
of the prefix would have exceeded the buffer size. Since the
block sizes are hardcoded in the list of supported ciphers it
can be verified that there is no live bug here. Backpatch all
the way for consistency though, as this bug is old.
Author: Mikhail Gribkov <youzhick@gmail.com>
Discussion: https://postgr.es/m/CAMEv5_uWvcMCMdRFDsJLz2Q8g16HEa9xWyfrkr+FYMMFJhawOw@mail.gmail.com
Backpatch-through: v12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
libxml2 changed the required signature of error handler callbacks
to make the passed xmlError struct "const". This is causing build
failures on buildfarm member caiman, and no doubt will start showing
up in the field quite soon. Add a version check to adjust the
declaration of xml_errorHandler() according to LIBXML_VERSION.
2.12.x also produces deprecation warnings for contrib/xml2/xpath.c's
assignment to xmlLoadExtDtdDefaultValue. I see no good reason for
that to still be there, seeing that we disabled external DTDs (at a
lower level) years ago for security reasons. Let's just remove it.
Back-patch to all supported branches, since they might all get built
with newer libxml2 once it gets a bit more popular. (The back
branches produce another deprecation warning about xpath.c's use of
xmlSubstituteEntitiesDefault(). We ought to consider whether to
back-patch all or part of commit 65c5864d7 to silence that. It's
less urgent though, since it won't break the buildfarm.)
Discussion: https://postgr.es/m/1389505.1706382262@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
| |
An array element equal to INT_MAX gave this code indigestion,
causing an infinite loop that surely ended in SIGSEGV. We fixed
some nearby problems awhile ago (cf 757c5182f) but missed this.
Report and diagnosis by Alexander Lakhin (bug #18273); patch by me
Discussion: https://postgr.es/m/18273-9a832d1da122600c@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This function reads directly a page from a relation, relying on
index_open() to open the index to read from. Unfortunately, this would
crash when using partitioned indexes, as these can be opened with
index_open() but they have no physical pages.
Alexander has fixed the module, while I have written the test.
Author: Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/18246-f4d9ff7cb3af77e6@postgresql.org
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As coded, the function relied on index_open() when opening an index
relation, allowing partitioned indexes to be processed by
pgstathashindex(). This was leading to a "could not open file" error
because partitioned indexes have no physical files, or to a crash with
an assertion failure (like on HEAD).
This issue is fixed by applying the same checks as the other stat
functions for indexes, with a lookup at both RELKIND_INDEX and the index
AM expected.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/18246-f4d9ff7cb3af77e6@postgresql.org
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
4b8266415 added a precheck to pgrowlocks() to ensure the given object's
pg_class.relam is HEAP_TABLE_AM_OID, however, that check was put before
another check which was checking if the given object was a partitioned
table. Since the pg_class.relam is always InvalidOid for partitioned
tables, if pgrowlocks() was called passing a partitioned table, then the
"only heap AM is supported" error would be raised instead of the intended
error about the given object being a partitioned table.
Here we simply move the pg_class.relam check to after the check that
verifies that we are in fact working with a normal (non-partitioned)
table.
Reported-by: jian he
Discussion: https://postgr.es/m/CACJufxFaSp_WguFCf0X98951zFVX+dXFnF1mxAb-G3g1HiHOow@mail.gmail.com
Backpatch-through: 12, where 4b8266415 was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
pgstatindex failed with ERRCODE_DATA_CORRUPTED, of the "can't-happen"
class XX. The other functions succeeded on an empty index; they might
have malfunctioned if the failed index build left torn I/O or other
complex state. Report an ERROR in statistics functions pgstatindex,
pgstatginindex, pgstathashindex, and pgstattuple. Report DEBUG1 and
skip all index I/O in maintenance functions brin_desummarize_range,
brin_summarize_new_values, brin_summarize_range, and
gin_clean_pending_list. Back-patch to v11 (all supported versions).
Discussion: https://postgr.es/m/20231001195309.a3@google.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This prevents false-positive reports about "the first child of leftmost
target page is not leftmost of its level", "block %u is not leftmost"
and "left link/right link pair". They appeared if amcheck ran before
VACUUM cleaned things, after a cluster exited recovery between the
first-stage and second-stage WAL records of a deletion. Back-patch to
v11 (all supported versions).
Reviewed by Peter Geoghegan.
Discussion: https://postgr.es/m/20231005025232.c7.nmisch@google.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Formerly, the value computed by leftmostvalue_interval() was a long
way short of the minimum possible interval value. As a result, an
index scan on a GIN index on an interval column with < or <= operators
would miss large negative interval values.
Fix by setting all fields of the leftmost interval to their minimum
values, ensuring that the result is less than any other possible
interval. Since this only affects index searches, no index rebuild is
necessary.
Back-patch to all supported branches.
Dean Rasheed, reviewed by Heikki Linnakangas.
Discussion: https://postgr.es/m/CAEZATCV80%2BgOfF8ehNUUfaKBZgZMDfCfL-g1HhWGb6kC3rpDfw%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Under interval_ops, some equal values are distinguishable. One such
pair is '24:00:00' and '1 day'. With that being so, btequalimage()
breaches the documented contract for the "equalimage" btree support
function. This can cause incorrect results from index-only scans.
Users should REINDEX any btree indexes having interval-type columns.
After updating, pg_amcheck will report an error for almost all such
indexes. This fix makes interval_ops simply omit the support function,
like numeric_ops does. Back-pack to v13, where btequalimage() first
appeared. In back branches, for the benefit of old catalog content,
btequalimage() code will return false for type "interval". Going
forward, back-branch initdb will include the catalog change.
Reviewed by Peter Geoghegan.
Discussion: https://postgr.es/m/20231011013317.22.nmisch@google.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As coded, the module's Makefile would fail to set a value for PYTHON as
it checked if the variable is defined. When compiling without
--with-python, PYTHON is defined and set to an empty value, so the
existing check is not able to do its work.
This commit switches the rule to check if the value is empty rather than
defined, allowing the generation of unaccent.rules even if --with-python
is not used as long as "python" exists. BISON and FLEX do the same in
pgxs.mk, for instance.
Thinko in f85a485f89e2.
Author: Japin Li
Discussion: https://postgr.es/m/MEYP282MB1669F86C0DC7B4DC48489CB0B6C3A@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
Backpatch-through: 13
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Yet another bug in the ilk of commits a7ee7c851 and 741b88435. In
741b88435, we took care to clear the memorized location of the
downlink when we split the parent page, because splitting the parent
page can move the downlink. But we missed that even *updating* a tuple
on the parent can move it, because updating a tuple on a gist page is
implemented as a delete+insert, so the updated tuple gets moved to the
end of the page.
This commit fixes the bug in two different ways (belt and suspenders):
1. Clear the downlink when we update a tuple on the parent page, even
if it's not split. This the same approach as in commits a7ee7c851
and 741b88435.
I also noticed that gistFindCorrectParent did not clear the
'downlinkoffnum' when it stepped to the right sibling. Fix that
too, as it seems like a clear bug even though I haven't been able
to find a test case to hit that.
2. Change gistFindCorrectParent so that it treats 'downlinkoffnum'
merely as a hint. It now always first checks if the downlink is
still at that location, and if not, it scans the page like before.
That's more robust if there are still more cases where we fail to
clear 'downlinkoffnum' that we haven't yet uncovered. With this,
it's no longer necessary to meticulously clear 'downlinkoffnum',
so this makes the previous fixes unnecessary, but I didn't revert
them because it still seems nice to clear it when we know that the
downlink has moved.
Also add the test case using the same test data that Alexander
posted. I tried to reduce it to a smaller test, and I also tried to
reproduce this with different test data, but I was not able to, so
let's just include what we have.
Backpatch to v12, like the previous fixes.
Reported-by: Alexander Lakhin
Discussion: https://www.postgresql.org/message-id/18129-caca016eaf0c3702@postgresql.org
|
| |
|
|
|
|
|
|
|
| |
Commit e4106b252 should have updated this test, but did not; back-patch
to all supported branches.
Reviewed by Richard Guo.
Discussion: http://postgr.es/m/CAPmGK15nR0NXLSCKQAcqbZbTzrzd5MozowWnTnGfPkayndF43Q%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit e7cb7ee14, which introduced the infrastructure for FDWs and
custom scan providers to replace joins with scans, failed to add support
handling of pseudoconstant quals assigned to replaced joins in
createplan.c, leading to an incorrect plan without a gating Result node
when postgres_fdw replaced a join with such a qual.
To fix, we could add the support by 1) modifying the ForeignPath and
CustomPath structs to store the list of RestrictInfo nodes to apply to
the join, as in JoinPaths, if they represent foreign and custom scans
replacing a join with a scan, and by 2) modifying create_scan_plan() in
createplan.c to use that list in that case, instead of the
baserestrictinfo list, to get pseudoconstant quals assigned to the join;
but #1 would cause an ABI break. So fix by modifying the infrastructure
to just disallow replacing joins with such quals.
Back-patch to all supported branches.
Reported by Nishant Sharma. Patch by me, reviewed by Nishant Sharma and
Richard Guo.
Discussion: https://postgr.es/m/CADrsxdbcN1vejBaf8a%2BQhrZY5PXL-04mCd4GDu6qm6FigDZd6Q%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GiST compress functions (like all GiST opclass functions) are
supposed to be called in short-lived memory contexts, so that
minor memory leaks in them are not of concern, and indeed
explicit pfree's are likely slightly counterproductive.
But this one in g_intbig_compress() is more than
slightly counterproductive, because it's guarded by
"if (in != DatumGetArrayTypeP(entry->key))" which means
that if this test succeeds, we've detoasted the datum twice.
(And to add insult to injury, the extra detoast result is
leaked.) Let's just drop the whole stanza, relying on the
GiST temporary context mechanism to clean up in good time.
The analogous bit in g_int_compress() is
if (r != (ArrayType *) DatumGetPointer(entry->key))
pfree(r);
which doesn't have the gratuitous-detoast problem so
I left it alone. Perhaps there is a case for removing
unnecessary pfree's more widely, but I'm not sure if it's
worth the code churn.
The potential extra decompress seems expensive enough to
justify calling this a (minor) performance bug and
back-patching.
Konstantin Knizhnik, Matthias van de Meent, Tom Lane
Discussion: https://postgr.es/m/CAEze2Wi86=DxErfvf+SCB2UKmU2amKOF60BKuJOX=w-RojRn0A@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As gist__int_ops stands in intarray, it is possible to store GiST
entries for leaf pages that can cause corruptions when decompressed.
Leaf nodes are stored as decompressed all the time by the compression
method, and the decompression method should map with that, retrieving
the contents of the page without doing any decompression. However, the
code authorized the insertion of leaf page data with a higher number of
array items than what can be supported, generating a NOTICE message to
inform about this matter (199 for a 8k page, for reference). When
calling the decompression method, a decompression would be attempted on
this leaf node item but the contents should be retrieved as they are.
The NOTICE message generated when dealing with the compression of a leaf
page and too many elements in the input array for gist__int_ops has been
introduced by 08ee64e, removing the marker stored in the array to track
if this is actually a leaf node. However, it also missed the fact that
the decompression path should do nothing for a leaf page. Hence, as the
code stand, a too-large array would be stored as uncompressed but the
decompression path would attempt a decompression rather that retrieving
the contents as they are.
This leads to various problems. First, even if 08ee64e tried to address
that, it is possible to do out-of-bound chunk writes with a large input
array, with the backend informing about that with WARNINGs. On
decompression, retrieving the stored leaf data would lead to incorrect
memory reads, leading to crashes or even worse.
Perhaps somebody would be interested in expanding the number of array
items that can be handled in a leaf page for this operator in the
future, which would require revisiting the choice done in 08ee64e, but
based on the lack of reports about this problem since 2005 it does not
look so. For now, this commit prevents the insertion of data for leaf
pages when using more array items that the code can handle on
decompression, switching the NOTICE message to an ERROR. If one wishes
to use more array items, gist__intbig_ops is an optional choice.
While on it, use ERRCODE_PROGRAM_LIMIT_EXCEEDED as error code when a
limit is reached, because that's what the module is facing in such
cases.
Author: Ankit Kumar Pandey, Alexander Lakhin
Reviewed-by: Richard Guo, Michael Paquier
Discussion: https://postgr.es/m/796b65c3-57b7-bddf-b0d5-a8afafb8b627@gmail.com
Discussion: https://postgr.es/m/17888-f72930e6b5ce8c14@postgresql.org
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
isspace() can be locale-sensitive depending on the platform, causing
hstore to consider as whitespaces characters it should not see as such.
For example, U+0105, being decoded as 0xC4 0x85 in UTF-8, would be
discarded from the input given.
This problem is similar to 9ae2661, though it was missed that hstore
can also manipulate non-ASCII inputs, so replace the existing isspace()
calls with scanner_isspace().
This problem exists for a long time, so backpatch all the way down.
Author: Evan Jones
Discussion: https://postgr.es/m/CA+HWA9awUW0+RV_gO9r1ABZwGoZxPztcJxPy8vMFSTbTfi4jig@mail.gmail.com
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
fuzzystrmatch's difference() function assumes that _soundex()
always initializes its output buffer fully. This was not so for
the case of a string containing no alphabetic characters, resulting
in unstable output and Valgrind complaints.
Fix by using memset() to fill the whole buffer in the early-exit
case. Also make some cosmetic improvements (I didn't care for the
random switches between "instr[0]" and "*instr" notation).
Report and diagnosis by Alexander Lakhin (bug #17935).
Back-patch to all supported branches.
Discussion: https://postgr.es/m/17935-b99316aa79c18513@postgresql.org
|
| |
|
|
| |
Security: CVE-2023-2454
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The two methods don't cooperate, so set_config_option("search_path",
...) has been ineffective under non-empty overrideStack. This defect
enabled an attacker having database-level CREATE privilege to execute
arbitrary code as the bootstrap superuser. While that particular attack
requires v13+ for the trusted extension attribute, other attacks are
feasible in all supported versions.
Standardize on the combination of NewGUCNestLevel() and
set_config_option("search_path", ...). It is newer than
PushOverrideSearchPath(), more-prevalent, and has no known
disadvantages. The "override" mechanism remains for now, for
compatibility with out-of-tree code. Users should update such code,
which likely suffers from the same sort of vulnerability closed here.
Back-patch to v11 (all supported versions).
Alexander Lakhin. Reported by Alexander Lakhin.
Security: CVE-2023-2454
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Python 3 changed the behavior of PyMapping_Check(), breaking the
test in plpython_to_hstore() that verifies whether a function result
to be transformed is acceptable. A backwards-compatible fix is to
first verify that the object doesn't pass PySequence_Check().
Perhaps accidentally, our other uses of PyMapping_Check() already
follow uses of PySequence_Check(), so that no other bugs were
created by this change.
Per bug #17908 from Alexander Lakhin. Back-patch to all supported
branches.
Dmitry Dolgov and Tom Lane
Discussion: https://postgr.es/m/17908-3f19a125d56a11d6@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Unaligned siglen could lead to an unaligned access to subsequent key fields.
Backpatch to 13, where opclass options were introduced.
Reported-by: Alexander Lakhin
Bug: 17847
Discussion: https://postgr.es/m/17847-171232970bea406b%40postgresql.org
Reviewed-by: Tom Lane, Pavel Borisov, Alexander Lakhin
Backpatch-through: 13
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If the regex compiler can see that a regex is unsatisfiable
(for example, '$foo') then it may emit an NFA having no arcs.
pg_trgm's packGraph function did the wrong thing in this case;
it would access off the end of a work array, and with bad luck
could produce a corrupted output data structure causing more
problems later. This could end with wrong answers or crashes
in queries using a pg_trgm GIN or GiST index with such a regex.
Fix by not trying to de-duplicate if there aren't at least 2 arcs.
Per bug #17830 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17830-57ff5f89bdb02b09@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We were identifying the updatable generated columns of inheritance
children by transposing the calculation made for their parent.
However, there's nothing that says a traditional-inheritance child
can't have generated columns that aren't there in its parent, or that
have different dependencies than are in the parent's expression.
(At present it seems that we don't enforce that for partitioning
either, which is likely wrong to some degree or other; but the case
clearly needs to be handled with traditional inheritance.)
Hence, drop the very-klugy-anyway "extraUpdatedCols" RTE field
in favor of identifying which generated columns depend on updated
columns during executor startup. In HEAD we can remove
extraUpdatedCols altogether; in back branches, it's still there but
always empty. Another difference between the HEAD and back-branch
versions of this patch is that in HEAD we can add the new bitmap field
to ResultRelInfo, but that would cause an ABI break in back branches.
Like 4b3e37993, add a List field at the end of struct EState instead.
Back-patch to v13. The bogus calculation is also being made in v12,
but it doesn't have the same visible effect because we don't use it
to decide which generated columns to recalculate; as a consequence of
which the patch doesn't apply easily. I think that there might still
be a demonstrable bug associated with trigger firing conditions, but
that's such a weird corner-case usage that I'm content to leave it
unfixed in v12.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqFshLKNvQUd1DgwJ-7tsTp=dwv7KZqXC4j2wYBV1aCDUA@mail.gmail.com
Discussion: https://postgr.es/m/2793383.1672944799@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
seg stores the number of significant digits in an input number
in a "char" field. If char is signed, and the input is more than
127 digits long, the count can read out as negative causing
seg_out() to print garbage (or, if you're really unlucky,
even crash).
To fix, clamp the digit count to be not more than FLT_DIG.
(In theory this loses some information about what the original
input was, but it doesn't seem like useful information; it would
not survive dump/restore in any case.)
Also, in case there are stored values of the seg type containing
bad data, add a clamp in seg_out's restore() subroutine.
Per bug #17725 from Robins Tharakan. It's been like this
forever, so back-patch to all supported branches.
Discussion: https://postgr.es/m/17725-0a09313b67fbe86e@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a back-patch of the v15-era commit f10f0ae42 into older
supported branches. The idea is to design out bugs in which an
ill-timed relcache flush clears rel->rd_smgr partway through
some code sequence that wasn't expecting that. We had another
report today of a corner case that reliably crashes v14 under
debug_discard_caches (nee CLOBBER_CACHE_ALWAYS), and therefore
would crash once in a blue moon in the field. We're unlikely
to get rid of all such code paths unless we adopt the more
rigorous coding rules instituted by f10f0ae42. Therefore,
even though this is a bit invasive, it's time to back-patch.
Some comfort can be taken in the fact that f10f0ae42 has been
in v15 for 16 months without problems.
I left the RelationOpenSmgr macro present in the back branches,
even though no core code should use it anymore, in order to not break
third-party extensions in minor releases. Such extensions might opt
to start using RelationGetSmgr instead, to reduce their code
differential between v15 and earlier branches. This carries a hazard
of failing to compile against headers from existing minor releases.
However, once compiled the extension should work fine even with such
releases, because RelationGetSmgr is a "static inline" function so
it creates no link-time dependency. So depending on distribution
practices, that might be an OK tradeoff.
Per report from Spyridon Dimitrios Agathos. Original patch
by Amul Sul.
Discussion: https://postgr.es/m/CAFM5RaqdgyusQvmWkyPYaWMwoK5gigdtW-7HcgHgOeAw7mqJ_Q@mail.gmail.com
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
|
