| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
| |
Add a CHECK_FOR_INTERRUPTS() call to make heap relation verification
responsive to query cancellations.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/CAH2-Wzk-9RtQgb2QiuLv8j2O0j9tSFKPmmch5nWSZhguUxvbrw%40mail.gmail.com
Backpatch: 14-, where amcheck heap verification was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 325f2ec555 introduced pg_class.relwrite to skip operations on
tables created as part of a heap rewrite during DDL. It links such
transient heaps to the original relation OID via this new field in
pg_class but forgot to do anything about toast tables. So, logical
decoding was not able to skip operations on internally created toast
tables. This leads to an error when we tried to decode the WAL for the
next operation for which it appeared that there is a toast data where
actually it didn't have any toast data.
To fix this, we set pg_class.relwrite for internally created toast tables
as well which allowed skipping operations on them during logical decoding.
Author: Bertrand Drouvot
Reviewed-by: David Zhang, Amit Kapila
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/b5146fb1-ad9e-7d6e-f980-98ed68744a7c@amazon.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
As a result of confusion about whether the "char" type is signed or
unsigned, scans for index searches like "col < 'x'" or "col <= 'x'"
would start at the middle of the index not the left end, thus missing
many or all of the entries they should find. Fortunately, this
is not a symptom of index corruption. It's only the search logic
that is broken, and we can fix it without unpleasant side-effects.
Per report from Jason Kim. This has been wrong since btree_gin's
beginning, so back-patch to all supported branches.
Discussion: https://postgr.es/m/20210810001649.htnltbh7c63re42p@jasonk.me
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
postgres_fdw imported generated columns from the remote tables as plain
columns, and caused failures like "ERROR: cannot insert a non-DEFAULT
value into column "foo"" when inserting into the foreign tables, as it
tried to insert values into the generated columns. To fix, we do the
following under the assumption that generated columns in a postgres_fdw
foreign table are defined so that they represent generated columns in
the underlying remote table:
* Send DEFAULT for the generated columns to the foreign server on insert
or update, not generated column values computed on the local server.
* Add to postgresImportForeignSchema() an option "import_generated" to
include column generated expressions in the definitions of foreign
tables imported from a foreign server. The option is true by default.
The assumption seems reasonable, because that would make a query of the
postgres_fdw foreign table return values for the generated columns that
are consistent with the generated expression.
While here, fix another issue in postgresImportForeignSchema(): it tried
to include column generated expressions as column default expressions in
the foreign table definitions when the import_default option was enabled.
Per bug #16631 from Daniel Cherniy. Back-patch to v12 where generated
columns were added.
Discussion: https://postgr.es/m/16631-e929fe9db0ffc7cf%40postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
I failed to account for the possibility that when
ExecAppendAsyncEventWait() notifies multiple async-capable nodes using
postgres_fdw, a preceding node might invoke process_pending_request() to
process a pending asynchronous request made by a succeeding node. In
that case the succeeding node should produce a tuple to return to the
parent Append node from tuples fetched by process_pending_request() when
notified. Repair.
Per buildfarm via Michael Paquier. Back-patch to v14, like the previous
commit.
Thanks to Tom Lane for testing.
Discussion: https://postgr.es/m/YQP0UPT8KmPiHTMs%40paquier.xyz
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A pending asynchronous request is handled by process_pending_request(),
which previously not only processed an in-progress remote query but
performed ExecForeignScan() to produce a tuple to return to the local
server asynchronously from the result of the remote query. But that led
to a server crash when executing a query or led to an "InstrStartNode
called twice in a row" or "InstrEndLoop called on running node" failure
when doing EXPLAIN ANALYZE of it, in cases where the plan tree for it
contained multiple async-capable nodes accessing the same
initplan/subplan that contained multiple async-capable nodes scanning
the same foreign tables as for the parent async-capable nodes, as
reported by Andrey Lepikhov. The reason is that the second step in
process_pending_request() invoked when executing the initplan/subplan
for one of the parent async-capable nodes caused recursive execution of
the initplan/subplan for another of the parent async-capable nodes.
To fix, split process_pending_request() into the two steps and postpone
the second step until ForeignAsyncConfigureWait() is called for each of
the pending asynchronous requests. Also, in ExecAppendAsyncEventWait()
we assumed that FDWs would register at least one wait event in a
WaitEventSet created there when they were called from
ForeignAsyncConfigureWait() in that function, but allow FDWs to register
zero wait events in the WaitEventSet; modify ExecAppendAsyncEventWait()
to just return in that case.
Oversight in commit 27e1f1456. Back-patch to v14 where that commit went
in.
Andrey Lepikhov and Etsuro Fujita
Discussion: https://postgr.es/m/fe5eaa19-1704-e4a4-76ee-3b9d37ade399@postgrespro.ru
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
|
| |
|
|
|
|
|
|
| |
Turns out the buildfarm hasn't been testing this, which will soon change.
Julien Rouhaud, per report from me
Discussion: https://postgr.es/m/42557.1627229005@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
| |
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
|
| |
|
|
|
|
|
|
| |
The name introduced by commit 4656e3d66 was agreed to be unreasonably
long. To match this change, rename initdb's recently-added
--clobber-cache option to --discard-caches.
Discussion: https://postgr.es/m/1374320.1625430433@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
In 86dc90056, I'd written find_modifytable_subplan with the assumption
that if the immediate child of a ModifyTable is a Result, it must be
a projecting Result with a subplan. However, if the UPDATE or DELETE
has a provably-constant-false WHERE clause, that's not so: we'll
generate a dummy subplan with a childless Result. Add the missing
null-check so we don't crash on such cases.
Per report from Alexander Pyhalov.
Discussion: https://postgr.es/m/b9a6f53549456b2f3e2fd150dcd79d72@postgrespro.ru
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously the values such as '100$%$#$#', '9,223,372,' were accepted and
treated as valid integers for postgres_fdw options batch_size and fetch_size.
Whereas this is not the case with fdw_startup_cost and fdw_tuple_cost options
for which an error is thrown. This was because endptr was not used
while converting strings to integers using strtol.
This commit changes the logic so that it uses parse_int function
instead of strtol as it serves the purpose by returning false in case
if it is unable to convert the string to integer. Note that
this function also rounds off the values such as '100.456' to 100 and
'100.567' or '100.678' to 101.
While on this, use parse_real for fdw_startup_cost and fdw_tuple_cost options.
Since parse_int and parse_real are being used for reloptions and GUCs,
it is more appropriate to use in postgres_fdw rather than using strtol
and strtod directly.
Back-patch to v14.
Author: Bharath Rupireddy
Reviewed-by: Ashutosh Bapat, Tom Lane, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVMO6wY5Pc4oe1OCgUOAtdjHuFsBDw8R5uoYR86eWFQDA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As in 50371df26, this is a bad idea since the callback can't really
know what error is being thrown and thus whether or not it is safe
to attempt catalog accesses. Rather than pushing said accesses into
the mainline code where they'd usually be a waste of cycles, we can
look at the query's rangetable instead.
This change does mean that we'll be printing query aliases (if any
were used) rather than the table or column's true name. But that
doesn't seem like a bad thing: it's certainly a more useful definition
in self-join cases, for instance. In any case, it seems unlikely that
any applications would be depending on this detail, so it seems safe
to change.
Patch by me. Original complaint by Andres Freund; Bharath Rupireddy
noted the connection to conversion_error_callback.
Discussion: https://postgr.es/m/20210106020229.ne5xnuu6wlondjpe@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The queries involving ft1_nopw don't stably return the same row
anymore. I surmise that an autovacuum hitting "S 1"."T 1"
right after the updates introduced by f61db909d/5843659d0 freed
some space, changing where subsequent insertions get stored.
It's only by good luck that these results were stable before,
though, since a LIMIT without ORDER BY isn't well defined,
and it's not like we've ever treated that table as append-only
in this test script.
Since we only really care whether these commands succeed or not,
just replace "SELECT *" with "SELECT 1".
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=crake&dt=2021-06-23%2019%3A52%3A08
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For no obvious reason, isolationtester has always insisted that
session and step names be written with double quotes. This is
fairly tedious and does little for test readability, especially
since the names that people actually choose almost always look
like normal identifiers. Hence, let's tweak the lexer to allow
SQL-like identifiers not only double-quoted strings.
(They're SQL-like, not exactly SQL, because I didn't add any
case-folding logic. Also there's no provision for U&"..." names,
not that anyone's likely to care.)
There is one incompatibility introduced by this change: if you write
"foo""bar" with no space, that used to be taken as two identifiers,
but now it's just one identifier with an embedded quote mark.
I converted all the src/test/isolation/ specfiles to remove
unnecessary double quotes, but stopped there because my
eyes were glazing over already.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/759113.1623861959@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, isolationtester displayed SQL query results using some
ad-hoc code that clearly hadn't had much effort expended on it.
Field values longer than 14 characters weren't separated from
the next field, and usually caused misalignment of the columns
too. Also there was no visual separation of a query's result
from subsequent isolationtester output. This made test result
files confusing and hard to read.
To improve matters, let's use libpq's PQprint() function. Although
that's long since unused by psql, it's still plenty good enough
for the purpose here.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/582362.1623798221@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We've long contended with isolation test results that aren't entirely
stable. Some test scripts insert long delays to try to force stable
results, which is not terribly desirable; but other erratic failure
modes remain, causing unrepeatable buildfarm failures. I've spent a
fair amount of time trying to solve this by improving the server-side
support code, without much success: that way is fundamentally unable
to cope with diffs that stem from chance ordering of arrival of
messages from different server processes.
We can improve matters on the client side, however, by annotating
the test scripts themselves to show the desired reporting order
of events that might occur in different orders. This patch adds
three types of annotations to deal with (a) test steps that might or
might not complete their waits before the isolationtester can see them
waiting; (b) test steps in different sessions that can legitimately
complete in either order; and (c) NOTIFY messages that might arrive
before or after the completion of a step in another session. We might
need more annotation types later, but this seems to be enough to deal
with the instabilities we've seen in the buildfarm. It also lets us
get rid of all the long delays that were previously used, cutting more
than a minute off the runtime of the isolation tests.
Back-patch to all supported branches, because the buildfarm
instabilities affect all the branches, and because it seems desirable
to keep isolationtester's capabilities the same across all branches
to simplify possible future back-patching of tests.
Discussion: https://postgr.es/m/327948.1623725828@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
| |
Code comments were claiming that verify_heapam() was checking
privileges on the relation it was operating on, but it didn't actually
do that. Perhaps earlier versions of the patch did that, but now the
access is regulated by privileges on the function. Remove the wrong
comments.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Buildfarm members ayu and tern have sometimes shown a different
plan than expected for this query. I'd been unable to reproduce
that before today, but I finally realized what is happening.
If there is a concurrent open transaction (probably an autovacuum
run in the buildfarm, but this can also be arranged manually),
then the index entries for the rows removed by the DELETE a few
lines up are not killed promptly, causing a change in the planner's
estimate of the extremal value of ft2.c1, which moves the rowcount
estimate for "c1 > 1100" by enough to change the join plan from
nestloop to hash.
To fix, change the query condition to "c1 > 1000", causing the
hash plan to be preferred whether or not a concurrent open
transaction exists. Since this UPDATE is tailored to be a no-op,
nothing else changes.
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=ayu&dt=2021-06-09%2022%3A45%3A48
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=ayu&dt=2021-06-13%2022%3A38%3A18
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=tern&dt=2021-06-20%2004%3A55%3A36
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the "simple Query" code path, it's fine for parse analysis or
execution of a utility statement to scribble on the statement's node
tree, since that'll just be thrown away afterwards. However it's
not fine if the node tree is in the plan cache, as then it'd be
corrupted for subsequent executions. Up to now we've dealt with
that by having individual utility-statement functions apply
copyObject() if they were going to modify the tree. But that's
prone to errors of omission. Bug #17053 from Charles Samborski
shows that CREATE/ALTER DOMAIN didn't get this memo, and can
crash if executed repeatedly from plan cache.
In the back branches, we'll just apply a narrow band-aid for that,
but in HEAD it seems prudent to have a more principled fix that
will close off the possibility of other similar bugs in future.
Hence, let's hoist the responsibility for doing copyObject up into
ProcessUtility from its children, thus ensuring that it happens for
all utility statement types.
Also, modify ProcessUtility's API so that its callers can tell it
whether a copy step is necessary. It turns out that in all cases,
the immediate caller knows whether the node tree is transient, so
this doesn't involve a huge amount of code thrashing. In this way,
while we lose a little bit in the execute-from-cache code path due
to sometimes copying node trees that wouldn't be mutated anyway,
we gain something in the simple-Query code path by not copying
throwaway node trees. Statements that are complex enough to be
expensive to copy are almost certainly ones that would have to be
copied anyway, so the loss in the cache code path shouldn't be much.
(Note that this whole problem applies only to utility statements.
Optimizable statements don't have the issue because we long ago made
the executor treat Plan trees as read-only. Perhaps someday we will
make utility statement execution act likewise, but I'm not holding
my breath.)
Discussion: https://postgr.es/m/931771.1623893989@sss.pgh.pa.us
Discussion: https://postgr.es/m/17053-3ca3f501bbc212b4@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit b676ac443b optimized handling of tuple slots with bulk inserts
into foreign tables, so that the slots are initialized only once and
reused for all batches. The data was however copied into the slots only
after the initialization, inserting duplicate values when the slot gets
reused. Fixed by moving the ExecCopySlot outside the init branch.
The existing postgres_fdw tests failed to catch this due to inserting
data into foreign tables without unique indexes, and then checking only
the number of inserted rows. This adds a new test with both a unique
index and a check of inserted values.
Reported-by: Alexander Pyhalov
Discussion: https://postgr.es/m/7a8cf8d56b3d18e5c0bccd6cd42d04ac%40postgrespro.ru
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The FE/BE protocol identifies parameters with an Int16 index, which
limits the maximum number of parameters per query to 65535. With
batching added to postges_fdw this limit is much easier to hit, as
the whole batch is essentially a single query, making this error much
easier to hit.
The failures are a bit unpredictable, because it also depends on the
number of columns in the query. So instead of just failing, this patch
tweaks the batch_size to not exceed the maximum number of parameters.
Reported-by: Hou Zhijie <houzj.fnst@cn.fujitsu.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/OS0PR01MB571603973C0AC2874AD6BF2594299%40OS0PR01MB5716.jpnprd01.prod.outlook.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
If autovacuum comes along just after we fill table test_seg with
some data, it will update the stats to the point where we prefer
a plain indexscan over a bitmap scan, breaking the expected
output (as well as the point of the test case). To fix, just
force a bitmap scan to be chosen here.
This has evidently been wrong since commit de1d042f5. It's not
clear why we just recently saw any buildfarm failures due to it;
but prairiedog has failed twice on this test in the past week.
Hence, backpatch to v11 where this test case came in.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In cases where run-time pruning isn't required, the synchronous and
asynchronous subplans for an async-aware Append node determined using
classify_matching_subplans() should be re-used when rescanning the node,
but the previous code re-determined them using that function repeatedly
each time when rescanning the node, leading to incorrect results in a
normal build and an Assert failure in an Assert-enabled build as that
function doesn't assume that it's called repeatedly in such cases. Fix
the code as mentioned above.
My oversight in commit 27e1f1456.
While at it, initialize async-related pointers/variables to NULL/zero
explicitly in ExecInitAppend() and ExecReScanAppend(), just to be sure.
(The variables would have been set to zero before we get to the latter
function, but let's do so.)
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAPmGK16Q4B2_KY%2BJH7rb7wQbw54AUprp7TMekGTd2T1B62yysQ%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 86dc90056 expects that FDWs can cope with whole-row Vars for
their tables, even if the Vars are marked with vartype RECORDOID.
Previously, whole-row Vars generated by the planner had vartype equal
to the relevant table's rowtype OID. (The point behind this change is
to enable sharing of resjunk columns across inheritance child tables.)
It turns out that postgres_fdw fails to cope with this, though through
bad fortune none of its test cases exposed that. Things mostly work,
but when we try to read back a value of such a Var, the expected
rowtype is not available to record_in(). Fortunately, it's not
difficult to hack up the tupdesc that controls this process to
substitute the foreign table's rowtype for RECORDOID. Thus we can
solve the runtime problem while still sharing the resjunk column
with other tables.
Per report from Alexander Pyhalov.
Discussion: https://postgr.es/m/7817fb9ebd6661cdf9b67dec6e129a78@postgrespro.ru
|
| |
|
|
|
|
|
| |
A few patches committed after ca3b37487 mistakenly forgot to make the
copyright year 2021. Fix these.
Discussion: https://postgr.es/m/CAApHDvqyLmd9P2oBQYJ=DbrV8QwyPRdmXtCTFYPE08h+ip0UJw@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 428b260f8 broke planning of cases where row marks are needed
(SELECT FOR UPDATE, etc) and one of the query's tables is a foreign
table that has regular table(s) as inheritance children. We got the
reverse case right, but apparently were thinking that foreign tables
couldn't be inheritance parents. Not so; so we need to be able to
add a CTID junk column while adding a new child, not only a wholerow
junk column.
Back-patch to v12 where the faulty code came in.
Amit Langote
Discussion: https://postgr.es/m/CA+HiwqEmo3FV1LAQ4TVyS2h1WM=kMkZUmbNuZSCnfHvMcUcPeA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While decoding the multi-insert WAL we can't clean the toast untill we get
the last insert of that WAL record. Now if we stream the changes before we
get the last change, the memory for toast chunks won't be released and we
expect the txn to have streamed all changes after streaming. This
restriction is mainly to ensure the correctness of streamed transactions
and it doesn't seem worth uplifting such a restriction just to allow this
case because anyway we will stream the transaction once such an insert is
complete.
Previously we were using two different flags (one for toast tuples and
another for speculative inserts) to indicate partial changes. Now instead
we replaced both of them with a single flag to indicate partial changes.
Reported-by: Pavan Deolasee
Author: Dilip Kumar
Reviewed-by: Pavan Deolasee, Amit Kapila
Discussion: https://postgr.es/m/CABOikdN-_858zojYN-2tNcHiVTw-nhxPwoQS4quExeweQfG1Ug@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Allowing only on/off meant that all either all existing configuration
guides would become obsolete if we disabled it by default, or that we
would have to accept a performance loss in the default config if we
enabled it by default. By allowing 'auto' as a middle ground, the
performance cost is only paid by those who enable pg_stat_statements and
similar modules.
I only edited the release notes to comment-out a paragraph that is now
factually wrong; further edits are probably needed to describe the
related change in more detail.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210513002623.eugftm4nk2lvvks3@nol
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commits 27e1f1456 and 86dc90056, which were independently discussed,
cause a crash when executing an inherited foreign UPDATE/DELETE query
with asynchronous execution enabled, where children of an Append node
that is the direct/indirect child of the ModifyTable node are rewritten
so as to modify foreign tables directly by postgresPlanDirectModify();
as in that case the direct modifications are executed asynchronously,
which is not currently supported by asynchronous execution. Fix by
disabling asynchronous execution of the direct modifications in that
function.
Author: Etsuro Fujita
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/CAPmGK158e9sJOfuWxfn%2B0ynrspXQU3JhNjSCbaoeSzMvnga%2Bbw%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Some of the tests were not considering that the slot's spill stats could be
received by the stats collector after we have reset the stats. Remove
those tests and don't check total bytes decoded and sent to output plugin
in the spilled stats test as we can send the spilled stats to the stats
collector before actually sending the changes to output plugin.
Reported-by: Tom Lane as per buildfarm
Author: Vignesh C, Sawada Masahiko
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
|
| |
|
|
|
|
|
|
| |
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
EXPLAIN ANALYZE for an async-capable ForeignScan node associated with
postgres_fdw is done just by using instrumentation for ExecProcNode()
called from the node's callbacks, causing the following problems:
1) If the remote table to scan is empty, the node is incorrectly
considered as "never executed" by the command even if the node is
executed, as ExecProcNode() isn't called from the node's callbacks at
all in that case.
2) The command fails to collect timings for things other than
ExecProcNode() done in the node, such as creating a cursor for the
node's remote query.
To fix these problems, add instrumentation for async-capable nodes, and
modify postgres_fdw accordingly.
My oversight in commit 27e1f1456.
While at it, update a comment for the AsyncRequest struct in execnodes.h
and the documentation for the ForeignAsyncRequest API in fdwhandler.sgml
to match the code in ExecAsyncAppendResponse() in nodeAppend.c, and fix
typos in comments in nodeAppend.c.
Per report from Andrey Lepikhov, though I didn't use his patch.
Reviewed-by: Andrey Lepikhov
Discussion: https://postgr.es/m/2eb662bb-105d-fc20-7412-2f027cc3ca72%40postgrespro.ru
|
| |
|
|
|
|
|
|
|
|
|
| |
When executing the INSERT with batching, we may need to rebuild the
query when the batch size changes, in which case we pfree the current
string. We must not release the original string, stored in fdw_private,
because that may be needed in EXPLAIN ANALYZE. So make copy of the SQL,
but only for INSERT queries.
Reported-by: Pavel Stehule
Discussion: https://postgr.es/m/CAFj8pRCL_Rjw-MCR6J7VX9OF7MR6PA5K8qUbrMvprW_e-aHkfQ%40mail.gmail.com
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 93f414614 improved a pre-existing test case so that it would
show whether or not termination of the "remote" worker process happened.
This soon exposed that, when debug_invalidate_system_caches_always
(nee CLOBBER_CACHE_ALWAYS) is enabled, no such termination occurs.
That's because cache invalidation forces postgres_fdw connections
to be dropped at end of transaction, so that there's no worker to
terminate. There's a race condition as to whether the worker will
manage to get out of the BackendStatusArray before we look, but at
least on buildfarm member hyrax, it's failed twice in two attempts.
Rather than re-lobotomizing the test, let's fix this by transiently
disabling debug_invalidate_system_caches_always. (Hooray for that
being just a GUC nowadays, rather than a compile-time option.)
If this proves not to be enough to make the test stable, we can
do the other thing instead.
Discussion: https://postgr.es/m/3854538.1620081771@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Properly fix:
- the "ONLY" in FROM [ONLY] isn't hashed
- the agglevelsup field in GROUPING isn't hashed
- WITH TIES not being hashed (new in PG 13)
- "DISTINCT" in "GROUP BY [DISTINCT]" isn't hashed (new in PG 14)
Reported-by: Julien Rouhaud
Discussion: https://postgr.es/m/20210425081119.ulyzxqz23ueh3wuj@nol
|
| |
|
|
|
|
|
|
|
|
| |
Don't phrase reports in terms of the number of tuples thus-far
returned by the index scan, but rather in terms of the chunk_seq
values found inside the tuples.
Patch by me, reviewed by Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoZUONCkdcdR778EKuE+f1r5Obieu63db2OgMPHaEvEPTQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Turns out you can specify negative values using plurals:
https://english.stackexchange.com/questions/9735/is-1-followed-by-a-singular-or-plural-noun
so the previous code was correct enough, and consistent with other usage
in our code. Also add comment in the two places where this could be
confused.
Reported-by: Noah Misch
Diagnosed-by: 20210425115726.GA2353095@rfd.leadboat.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As per analysis, it appears that the 'drop slot' message from the previous
test and 'create slot' message of the new test are either missed or not
yet delivered to the stats collector due to which we will still see the
stats from the old slot. This can happen rarely which could be the reason
that we are seeing some failures in the buildfarm randomly. To avoid that
we are using a different slot name for the tests in
test_decoding/sql/stats.sql.
Reported-by: Tom Lane based on buildfarm reports
Author: Sawada Masahiko
Reviewed-by: Amit Kapila, Vignesh C
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 8ff1c94649 allowed TRUNCATE command to truncate foreign tables.
Previously the information about "ONLY" options specified in TRUNCATE
command were passed to the foreign data wrapper. Then postgres_fdw
constructed the TRUNCATE command to issue the remote server and
included "ONLY" options in it based on the passed information.
On the other hand, "ONLY" options specified in SELECT, UPDATE or DELETE
have no effect when accessing or modifying the remote table, i.e.,
are not passed to the foreign data wrapper. So it's inconsistent to
make only TRUNCATE command pass the "ONLY" options to the foreign data
wrapper. Therefore this commit changes the TRUNCATE command so that
it doesn't pass the "ONLY" options to the foreign data wrapper,
for the consistency with other statements. Also this commit changes
postgres_fdw so that it always doesn't include "ONLY" options in
the TRUNCATE command that it constructs.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Kyotaro Horiguchi, Justin Pryzby, Zhihong Yu
Discussion: https://postgr.es/m/551ed8c1-f531-818b-664a-2cecdab99cd8@oss.nttdata.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, we used to use the array of size max_replication_slots to
store stats for replication slots. But that had two problems in the cases
where a message for dropping a slot gets lost: 1) the stats for the new
slot are not recorded if the array is full and 2) writing beyond the end
of the array if the user reduces the max_replication_slots.
This commit uses HTAB for replication slot statistics, resolving both
problems. Now, pgstat_vacuum_stat() search for all the dead replication
slots in stats hashtable and tell the collector to remove them. To avoid
showing the stats for the already-dropped slots, pg_stat_replication_slots
view searches slot stats by the slot name taken from pg_replication_slots.
Also, we send a message for creating a slot at slot creation, initializing
the stats. This reduces the possibility that the stats are accumulated
into the old slot stats when a message for dropping a slot gets lost.
Reported-by: Andres Freund
Author: Sawada Masahiko, test case by Vignesh C
Reviewed-by: Amit Kapila, Vignesh C, Dilip Kumar
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This isn't strictly necessary, but in theory it might matter if in the
future the width of the nbtree special area changes -- its total size
might not be an even number of MAXALIGN() quantums, even with padding.
PageInit() MAXALIGN()s all special area offsets, but amcheck uses the
offset to perform initial basic validation of line pointers, so we don't
rely on the offset from the page header.
The real reason to do this is to set a good example for new code that
adds amcheck coverage for other index AMs.
Reported-By: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CALj2ACUMqTR9nErh99FbOBmzCXE9=gXNqhBiwYOhejJJS1LXqQ@mail.gmail.com
|
| |
|
|
|
|
|
|
| |
%lld with (long long), or %llu with (unsigned long long) are more
adapted. This is similar to 3286065.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20210421.200000.1462448394029407895.horikyota.ntt@gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is cleanup for commit 27e1f1456:
* ExecAppendAsyncEventWait(), which was modified a bit further by commit
a8af856d3, duplicated the same nevents calculation. Simplify the code
a little bit to avoid the duplication. Update comments there.
* Add an assertion to ExecAppendAsyncRequest().
* Update a comment about merging the async_capable options from input
relations in merge_fdw_options(), per complaint from Kyotaro Horiguchi.
* Add a comment for fetch_more_data_begin().
Author: Etsuro Fujita
Discussion: https://postgr.es/m/CAPmGK1637W30Wx3MnrReewhafn6F_0J76mrJGoFXFnpPq4QfvA%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the new test after resetting the stats, we were not waiting for the
stats message to be delivered. Also, we need to decode the results for
the new test, otherwise, it will show the old stats.
In passing,
a. Change docs added by commit f5fc2f5b23 as per suggestion by
Justin Pryzby.
b. Bump the PGSTAT_FILE_FORMAT_ID as commit f5fc2f5b23 changes the file
format of stats.
Reported-by: Tom Lane based on buildfarm reports
Author: Vignesh C, Justin Pryzby
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
|
| |
|
|
|
| |
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210416070310.GG3315@telsasoft.com
|
| |
|
|
|
|
|
|
|
|
| |
A couple of tests have been using 0 as magic constant while SEEK_SET can
be used instead. This makes the code easier to understand, and more
consistent with the changes done in 3c5b068.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YHrc24AgJQ6tQ1q0@paquier.xyz
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This adds the statistics about total transactions count and total
transaction data logically sent to the decoding output plugin from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats.
Suggested-by: Andres Freund
Author: Vignesh C and Amit Kapila
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
|
