| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When heap_update needs to look for a page for the new tuple version,
because the current one doesn't have sufficient free space, or when
columns have to be processed by the tuple toaster, it has to release the
lock on the old page during that. Otherwise there'd be lock ordering and
lock nesting issues.
To avoid concurrent sessions from trying to update / delete / lock the
tuple while the page's content lock is released, the tuple's xmax is set
to the current session's xid.
That unfortunately was done without any WAL logging, thereby violating
the rule that no XIDs may appear on disk, without an according WAL
record. If the database were to crash / fail over when the page level
lock is released, and some activity lead to the page being written out
to disk, the xid could end up being reused; potentially leading to the
row becoming invisible.
There might be additional risks by not having t_ctid point at the tuple
itself, without having set the appropriate lock infomask fields.
To fix, compute the appropriate xmax/infomask combination for locking
the tuple, and perform WAL logging using the existing XLOG_HEAP_LOCK
record. That allows the fix to be backpatched.
This issue has existed for a long time. There appears to have been
partial attempts at preventing dangers, but these never have fully been
implemented, and were removed a long time ago, in
11919160 (cf. HEAP_XMAX_UNLOGGED).
In master / 9.6, there's an additional issue, namely that the
visibilitymap's freeze bit isn't reset at that point yet. Since that's a
new issue, introduced only in a892234f830, that'll be fixed in a
separate commit.
Author: Masahiko Sawada and Andres Freund
Reported-By: Different aspects by Thomas Munro, Noah Misch, and others
Discussion: CAEepm=3fWAbWryVW9swHyLTY4sXVf0xbLvXqOwUoDiNCx9mBjQ@mail.gmail.com
Backpatch: 9.1/all supported versions
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
0ac5ad5 started to compress infomask bits in WAL records. Unfortunately
the replay routines for XLOG_HEAP_LOCK/XLOG_HEAP2_LOCK_UPDATED forgot to
reset the HEAP_XMAX_INVALID (and some other) hint bits.
Luckily that's not problematic in the majority of cases, because after a
crash/on a standby row locks aren't meaningful. Unfortunately that does
not hold true in the presence of prepared transactions. This means that
after a crash, or after promotion, row level locks held by a prepared,
but not yet committed, prepared transaction might not be enforced.
Discussion: 20160715192319.ubfuzim4zv3rqnxv@alap3.anarazel.de
Backpatch: 9.3, the oldest branch on which 0ac5ad5 is present.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When key-share locking a tuple that has been not-key-updated, and the
update is a committed transaction, in some cases we raised
serializability errors:
ERROR: could not serialize access due to concurrent update
Because the key-share doesn't conflict with the update, the error is
unnecessary and inconsistent with the case that the update hasn't
committed yet. This causes problems for some usage patterns, even if it
can be claimed that it's sufficient to retry the aborted transaction:
given a steady stream of updating transactions and a long locking
transaction, the long transaction can be starved indefinitely despite
multiple retries.
To fix, we recognize that HeapTupleSatisfiesUpdate can return
HeapTupleUpdated when an updating transaction has committed, and that we
need to deal with that case exactly as if it were a non-committed
update: verify whether the two operations conflict, and if not, carry on
normally. If they do conflict, however, there is a difference: in the
HeapTupleBeingUpdated case we can just sleep until the concurrent
transaction is gone, while in the HeapTupleUpdated case this is not
possible and we must raise an error instead.
Per trouble report from Olivier Dony.
In addition to a couple of test cases that verify the changed behavior,
I added a test case to verify the behavior that remains unchanged,
namely that errors are raised when a update that modifies the key is
used. That must still generate serializability errors. One
pre-existing test case changes behavior; per discussion, the new
behavior is actually the desired one.
Discussion: https://www.postgresql.org/message-id/560AA479.4080807@odoo.com
https://www.postgresql.org/message-id/20151014164844.3019.25750@wrigleys.postgresql.org
Backpatch to 9.3, where the problem appeared.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GiST index build could go into an infinite loop when presented with boxes
(or points, circles or polygons) containing NaN component values. This
happened essentially because the code assumed that x == x is true for any
"double" value x; but it's not true for NaNs. The looping behavior was not
the only problem though: we also attempted to sort the items using simple
double comparisons. Since NaNs violate the trichotomy law, qsort could
(in principle at least) get arbitrarily confused and mess up the sorting of
ordinary values as well as NaNs. And we based splitting choices on box size
calculations that could produce NaNs, again resulting in undesirable
behavior.
To fix, replace all comparisons of doubles in this logic with
float8_cmp_internal, which is NaN-aware and is careful to sort NaNs
consistently, higher than any non-NaN. Also rearrange the box size
calculation to not produce NaNs; instead it should produce an infinity
for a box with NaN on one side and not-NaN on the other.
I don't by any means claim that this solves all problems with NaNs in
geometric values, but it should at least make GiST index insertion work
reliably with such data. It's likely that the index search side of things
still needs some work, and probably regular geometric operations too.
But with this patch we're laying down a convention for how such cases
ought to behave.
Per bug #14238 from Guang-Dih Lei. Back-patch to 9.2; the code used before
commit 7f3bd86843e5aad8 is quite different and doesn't lock up on my simple
test case, nor on the submitter's dataset.
Report: <20160708151747.1426.60150@wrigleys.postgresql.org>
Discussion: <28685.1468246504@sss.pgh.pa.us>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After pg_upgrade, it is possible that some tuples' Xmax have multixacts
corresponding to the old installation; such multixacts cannot have
running members anymore. In many code sites we already know not to read
them and clobber them silently, but at least when VACUUM tries to freeze
a multixact or determine whether one needs freezing, there's an attempt
to resolve it to its member transactions by calling GetMultiXactIdMembers,
and if the multixact value is "in the future" with regards to the
current valid multixact range, an error like this is raised:
ERROR: MultiXactId 123 has not been created yet -- apparent wraparound
and vacuuming fails. Per discussion with Andrew Gierth, it is completely
bogus to try to resolve multixacts coming from before a pg_upgrade,
regardless of where they stand with regards to the current valid
multixact range.
It's possible to get from under this problem by doing SELECT FOR UPDATE
of the problem tuples, but if tables are large, this is slow and
tedious, so a more thorough solution is desirable.
To fix, we realize that multixacts in xmax created in 9.2 and previous
have a specific bit pattern that is never used in 9.3 and later (we
already knew this, per comments and infomask tests sprinkled in various
places, but we weren't leveraging this knowledge appropriately).
Whenever the infomask of the tuple matches that bit pattern, we just
ignore the multixact completely as if Xmax wasn't set; or, in the case
of tuple freezing, we act as if an unwanted value is set and clobber it
without decoding. This guarantees that no errors will be raised, and
that the values will be progressively removed until all tables are
clean. Most callers of GetMultiXactIdMembers are patched to recognize
directly that the value is a removable "empty" multixact and avoid
calling GetMultiXactIdMembers altogether.
To avoid changing the signature of GetMultiXactIdMembers() in back
branches, we keep the "allow_old" boolean flag but rename it to
"from_pgupgrade"; if the flag is true, we always return an empty set
instead of looking up the multixact. (I suppose we could remove the
argument in the master branch, but I chose not to do so in this commit).
This was broken all along, but the error-facing message appeared first
because of commit 8e9a16ab8f7f and was partially fixed in a25c2b7c4db3.
This fix, backpatched all the way back to 9.3, goes approximately in the
same direction as a25c2b7c4db3 but should cover all cases.
Bug analysis by Andrew Gierth and Álvaro Herrera.
A number of public reports match this bug:
https://www.postgresql.org/message-id/20140330040029.GY4582@tamriel.snowman.net
https://www.postgresql.org/message-id/538F3D70.6080902@publicrelay.com
https://www.postgresql.org/message-id/556439CF.7070109@pscs.co.uk
https://www.postgresql.org/message-id/SG2PR06MB0760098A111C88E31BD4D96FB3540@SG2PR06MB0760.apcprd06.prod.outlook.com
https://www.postgresql.org/message-id/20160615203829.5798.4594@wrigleys.postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When the index is predicted to need more than NBuffers buckets,
CREATE INDEX attempts to sort the index entries by hash key before
insertion, so as to reduce thrashing. This code path got broken by
commit 9f03ca915196dfc8, which overlooked that _hash_form_tuple() is not
just an alias for index_form_tuple(). The index got built anyway, but
with garbage data, so that searches for pre-existing tuples always
failed. Fix by refactoring to separate construction of the indexable
data from calling index_form_tuple().
Per bug #14210 from Daniel Newman. Back-patch to 9.5 where the
bug was introduced.
Report: <20160623162507.17237.39471@wrigleys.postgresql.org>
|
| |
|
|
|
|
|
| |
Commit b8fd1a09f3 renamed XLOG_HINT to XLOG_FPI, but neglected two
places.
Backpatch to 9.3, like that commit.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 2ed5b87f96d473962ec5230fd820abfeaccb2069 introduced a bug in
mark/restore, in an attempt to optimize repeated restores to the
same page. This caused an assertion failure during a merge join
which fed directly from an index scan, although the impact would
not be limited to that case. Revert the bad chunk of code from
that commit.
While investigating this bug it was discovered that a particular
"paranoia" set of the mark position field would not prevent bad
behavior; it would just make it harder to diagnose. Change that
into an assertion, which will draw attention to any future problem
in that area more directly.
Backpatch to 9.5, where the bug was introduced.
Bug #14169 reported by Shinta Koyanagi.
Preliminary analysis by Tom Lane identified which commit caused
the bug.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BRIN was relying on the ability to remove a tuple from an index page,
then putting another tuple in the same line pointer. But PageAddItem
refuses to add a tuple beyond the first free item past the last used
item, and in particular, it rejects an attempt to add an item to an
empty page anywhere other than the first line pointer. PageAddItem
issues a WARNING and indicates to the caller that it failed, which in
turn causes the BRIN calling code to issue a PANIC, so the whole
sequence looks like this:
WARNING: specified item offset is too large
PANIC: failed to add BRIN tuple
To fix, create a new function PageAddItemExtended which is like
PageAddItem except that the two boolean arguments become a flags bitmap;
the "overwrite" and "is_heap" boolean flags in PageAddItem become
PAI_OVERWITE and PAI_IS_HEAP flags in the new function, and a new flag
PAI_ALLOW_FAR_OFFSET enables the behavior required by BRIN.
PageAddItem() retains its original signature, for compatibility with
third-party modules (other callers in core code are not modified,
either).
Also, in the belt-and-suspenders spirit, I added a new sanity check in
brinGetTupleForHeapBlock to raise an error if an TID found in the revmap
is not marked as live by the page header. This causes it to react with
"ERROR: corrupted BRIN index" to the bug at hand, rather than a hard
crash.
Backpatch to 9.5.
Bug reported by Andreas Seltenreich as detected by his handy sqlsmith
fuzzer.
Discussion: https://www.postgresql.org/message-id/87mvni77jh.fsf@elite.ansel.ydns.eu
|
| |
|
|
|
|
| |
Some comments mentioned XLogReplayBuffer, but there's no such function:
that was an interim name for a function that got renamed to
XLogReadBufferForRedo, before commit 2c03216d831160 was pushed.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 36a35c550ac114ca turned the interface between ginPlaceToPage and
its subroutines in gindatapage.c and ginentrypage.c into a royal mess:
page-update critical sections were started in one place and finished in
another place not even in the same file, and the very same subroutine
might return having started a critical section or not. Subsequent patches
band-aided over some of the problems with this design by making things
even messier.
One user-visible resulting problem is memory leaks caused by the need for
the subroutines to allocate storage that would survive until ginPlaceToPage
calls XLogInsert (as reported by Julien Rouhaud). This would not typically
be noticeable during retail index updates. It could be visible in a GIN
index build, in the form of memory consumption swelling to several times
the commanded maintenance_work_mem.
Another rather nasty problem is that in the internal-page-splitting code
path, we would clear the child page's GIN_INCOMPLETE_SPLIT flag well before
entering the critical section that it's supposed to be cleared in; a
failure in between would leave the index in a corrupt state. There were
also assorted coding-rule violations with little immediate consequence but
possible long-term hazards, such as beginning an XLogInsert sequence before
entering a critical section, or calling elog(DEBUG) inside a critical
section.
To fix, redefine the API between ginPlaceToPage() and its subroutines
by splitting the subroutines into two parts. The "beginPlaceToPage"
subroutine does what can be done outside a critical section, including
full computation of the result pages into temporary storage when we're
going to split the target page. The "execPlaceToPage" subroutine is called
within a critical section established by ginPlaceToPage(), and it handles
the actual page update in the non-split code path. The critical section,
as well as the XLOG insertion call sequence, are both now always started
and finished in ginPlaceToPage(). Also, make ginPlaceToPage() create and
work in a short-lived memory context to eliminate the leakage problem.
(Since a short-lived memory context had been getting created in the most
common code path in the subroutines, this shouldn't cause any noticeable
performance penalty; we're just moving the overhead up one call level.)
In passing, fix a bunch of comments that had gone unmaintained throughout
all this klugery.
Report: <571276DD.5050303@dalibo.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
The code had a query-lifespan memory leak when encountering GIN entries
that have posting lists (rather than posting trees, ie, there are a
relatively small number of heap tuples containing this index key value).
With a suitable data distribution this could add up to a lot of leakage.
Problem seems to have been introduced by commit 36a35c550, so back-patch
to 9.4.
Julien Rouhaud
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit d88976cfa1302e8d removed this code from ginFreeScanKeys():
- if (entry->list)
- pfree(entry->list);
evidently in the belief that that ItemPointer array is allocated in the
keyCtx and so would be reclaimed by the following MemoryContextReset.
Unfortunately, it isn't and it won't. It'd likely be a good idea for
that to become so, but as a simple and back-patchable fix in the
meantime, restore this code to ginFreeScanKeys().
Also, add a similar pfree to where startScanEntry() is about to zero out
entry->list. I am not sure if there are any code paths where this
change prevents a leak today, but it seems like cheap future-proofing.
In passing, make the initial allocation of so->entries[] use palloc
not palloc0. The code doesn't depend on unused entries being zero;
if it did, the array-enlargement code in ginFillScanEntry() would be
wrong. So using palloc0 initially can only serve to confuse readers
about what the invariant is.
Per report from Felipe de Jesús Molina Bravo, via Jaime Casanova in
<CAJGNTeMR1ndMU2Thpr8GPDUfiHTV7idELJRFusA5UXUGY1y-eA@mail.gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Renaming a file using rename(2) is not guaranteed to be durable in face
of crashes. Use the previously added durable_rename()/durable_link_or_rename()
in various places where we previously just renamed files.
Most of the changed call sites are arguably not critical, but it seems
better to err on the side of too much durability. The most prominent
known case where the previously missing fsyncs could cause data loss is
crashes at the end of a checkpoint. After the actual checkpoint has been
performed, old WAL files are recycled. When they're filled, their
contents are fdatasynced, but we did not fsync the containing
directory. An OS/hardware crash in an unfortunate moment could then end
up leaving that file with its old name, but new content; WAL replay
would thus not replay it.
Reported-By: Tomas Vondra
Author: Michael Paquier, Tomas Vondra, Andres Freund
Discussion: 56583BDD.9060302@2ndquadrant.com
Backpatch: All supported branches
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
An index search using a row comparison such as ROW(a, b) > ROW('x', 'y')
would stop upon reaching a NULL entry in the "b" column, ignoring the
fact that there might be non-NULL "b" values associated with later values
of "a". This happens because _bt_mark_scankey_required() marks the
subsidiary scankey for "b" as required, which is just wrong: it's for
a column after the one with the first inequality key (namely "a"), and
thus can't be considered a required match.
This bit of brain fade dates back to the very beginnings of our support
for indexed ROW() comparisons, in 2006. Kind of astonishing that no one
came across it before Glen Takahashi, in bug #14010.
Back-patch to all supported versions.
Note: the given test case doesn't actually fail in unpatched 9.1, evidently
because the fix for bug #6278 (i.e., stopping at nulls in either scan
direction) is required to make it fail. I'm sure I could devise a case
that fails in 9.1 as well, perhaps with something involving making a cursor
back up; but it doesn't seem worth the trouble.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously recovery_min_apply_delay was applied even before recovery
had reached consistency. This could cause us to wait a long time
unexpectedly for read-only connections to be allowed. It's problematic
because the standby was useless during that wait time.
This patch changes recovery_min_apply_delay so that it's applied once
the database has reached the consistent state. That is, even if the delay
is set, the standby tries to replay WAL records as fast as possible until
it has reached consistency.
Author: Michael Paquier
Reviewed-By: Julien Rouhaud
Reported-By: Greg Clough
Backpatch: 9.4, where recovery_min_apply_delay was added
Bug: #13770
Discussion: http://www.postgresql.org/message-id/20151111155006.2644.84564@wrigleys.postgresql.org
|
| |
|
|
|
|
|
| |
606c0123d627 attempted to reduce cost of index scans using > and <
strategies, though got that completely wrong in a few complex cases.
Revert whole patch until we find a safe optimization.
|
| |
|
|
|
|
|
|
|
|
| |
StartupSUBTRANS() incorrectly handled cases near the max pageid in the subtrans
data structure, which in some cases could lead to errors in startup for Hot
Standby.
This patch wraps the pageids correctly, avoiding any such errors.
Identified by exhaustive crash testing by Jeff Janes.
Jeff Janes
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
KNN GiST with recheck flag should return to executor the same type as ordering
operator, GiST detects this type by looking to return type of function which
implements ordering operator. But occasionally detecting code works after
replacing ordering operator function to distance support function.
Distance support function always returns float8, so, detecting code get float8
instead of actual return type of ordering operator.
Built-in opclasses don't have ordering operator which doesn't return
non-float8 value, so, tests are impossible here, at least now.
Backpatch to 9.5 where lozzy KNN was introduced.
Author: Alexander Korotkov
Report by: Artur Zakirov
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
spg_text_inner_consistent is capable of reconstructing an empty string
to pass down to the next index level; this happens if we have an empty
string coming in, no prefix, and a dummy node label. (In practice, what
is needed to trigger that is insertion of a whole bunch of empty-string
values.) Then, we will arrive at the next level with in->level == 0
and a non-NULL (but zero length) in->reconstructedValue, which is valid
but the Assert tests weren't expecting it.
Per report from Andreas Seltenreich. This has no impact in non-Assert
builds, so should not be a problem in production, but back-patch to
all affected branches anyway.
In passing, remove a couple of useless variable initializations and
shorten the code by not duplicating DatumGetPointer() calls.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The variables newestCommitTs and oldestCommitTs sound as if they are
timestamps, but in fact they are the transaction Ids that correspond
to the newest and oldest timestamps rather than the actual timestamps.
Rename these variables to reflect that they are actually xids: to wit
newestCommitTsXid and oldestCommitTsXid respectively. Also modify
related code in a similar fashion, particularly the user facing output
emitted by pg_controldata and pg_resetxlog.
Complaint and patch by me, review by Tom Lane and Alvaro Herrera.
Backpatch to 9.5 where these variables were first introduced.
|
| |
|
|
|
|
|
|
|
|
| |
brin_summarize_new_values() did not check that the passed OID was for
an index at all, much less that it was a BRIN index, and would fail in
obscure ways if it wasn't (possibly damaging data first?). It also
lacked any permissions test; by analogy to VACUUM, we should only allow
the table's owner to summarize.
Noted by Jeff Janes, fix by Michael Paquier and me
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, if find_multixact_start() failed, SetOffsetVacuumLimit() would
install 0 into MultiXactState->offsetStopLimit if it previously succeeded.
Luckily, there are no known cases where find_multixact_start() will return
an error in 9.5 and above. But if it were to happen, for example due to
filesystem permission issues, it'd be somewhat bad: GetNewMultiXactId()
could continue allocating mxids even if close to a wraparound, or it could
erroneously stop allocating mxids, even if no wraparound is looming. The
wrong value would be corrected the next time SetOffsetVacuumLimit() is
called, or by a restart.
Reported-By: Noah Misch, although this is not his preferred fix
Discussion: 20151210140450.GA22278@alap3.anarazel.de
Backpatch: 9.5, where the bug was introduced as part of 4f627f
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This module needs explicit initialization in order to replay WAL records
in recovery, but we had broken this recently following changes to make
other (stranger) scenarios work correctly. To fix, rework the
initialization sequence so that it always takes place before WAL replay
commences for both master and standby.
I could have gone for a more localized fix that just added a "startup"
call for the master server, but it seemed better to restructure the
existing callers as well so that the whole thing made more sense. As a
drawback, there is more control logic in xlog.c now than previously, but
doing otherwise meant passing down the ControlFile flag, which seemed
uglier as a whole.
This also meant adding a check to not re-execute ActivateCommitTs if it
had already been called.
Reported by Fujii Masao.
Backpatch to 9.5.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
At the end of crash recovery, unlogged relations are reset to the empty
state, using their init fork as the template. The init fork is copied to
the main fork without going through shared buffers. Unfortunately WAL
replay so far has not necessarily flushed writes from shared buffers to
disk at that point. In normal crash recovery, and before the
introduction of 'fast promotions' in fd4ced523 / 9.3, the
END_OF_RECOVERY checkpoint flushes the buffers out in time. But with
fast promotions that's not the case anymore.
To fix, force WAL writes targeting the init fork to be flushed
immediately (using the new FlushOneBuffer() function). In 9.5+ that
flush can centrally be triggered from the code dealing with restoring
full page writes (XLogReadBufferForRedoExtended), in earlier releases
that responsibility is in the hands of XLOG_HEAP_NEWPAGE's replay
function.
Backpatch to 9.1, even if this currently is only known to trigger in
9.3+. Flushing earlier is more robust, and it is advantageous to keep
the branches similar.
Typical symptoms of this bug are errors like
'ERROR: index "..." contains unexpected zero page at block 0'
shortly after promoting a node.
Reported-By: Thom Brown
Author: Andres Freund and Michael Paquier
Discussion: 20150326175024.GJ451@alap3.anarazel.de
Backpatch: 9.1-
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As pointed out by Fujii Masao, we weren't quite there on a standby
behaving sanely: first because we were failing to acquire the correct
state in the case where no XLOG_PARAMETER_CHANGE message was sent
(because a checkpoint had already happened after the setting was changed
in the master, and then the standby was restarted); and second because
promoting the standby with the feature enabled failed to activate it if
the master had the feature disabled.
This patch fixes both those misbehaviors hopefully without
re-introducing any old problems.
Also change the hint emitted in a standby together with the error
message about the feature being disabled, to make it point out that the
place to chance the setting is the master. Otherwise, if the setting is
already enabled in the standby, it is very confusing to have it say that
the setting must be enabled ...
Authors: Álvaro Herrera, Petr Jelínek.
Backpatch to 9.5.
|
| |
|
|
|
|
|
|
|
|
| |
At least one of the names was, due to a function renaming late in the
development of ON CONFLICT, wrong. Since including function names in
error messages is against the message style guide anyway, remove them
from the messages.
Discussion: CAM3SWZT8paz=usgMVHm0XOETkQvzjRtAUthATnmaHQQY0obnGw@mail.gmail.com
Backpatch: 9.5, where ON CONFLICT was introduced
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Up until now, the total amount of data that could be passed to a
background worker at startup was one datum, which can be a small as
4 bytes on some systems. That's enough to pass a dsm_handle or an
array index, but not much else. Add a bgw_extra flag to the
BackgroundWorker struct, allowing up to 128 bytes to be passed to
a new worker on any platform.
Use this to fix a problem I recently discovered with the parallel
context machinery added in 9.5: the master assigns each worker an
array index, and each worker subsequently assigns itself an array
index, and there's nothing to guarantee that the two sets of indexes
match, leading to chaos.
Normally, I would not back-patch the change to add bgw_extra, since it
is basically a feature addition. However, since 9.5 is still in beta
and there seems to be no other sensible way to repair the broken
parallel context machinery, back-patch to 9.5. Existing background
worker code can ignore the bgw_extra field without a problem, but
might need to be recompiled since the structure size has changed.
Report and patch by me. Review by Amit Kapila.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On insert the CheckForSerializableConflictIn() test was performed
before the page(s) which were going to be modified had been locked
(with an exclusive buffer content lock). If another process
acquired a relation SIReadLock on the heap and scanned to a page on
which an insert was going to occur before the page was so locked,
a rw-conflict would be missed, which could allow a serialization
anomaly to be missed. The window between the check and the page
lock was small, so the bug was generally not noticed unless there
was high concurrency with multiple processes inserting into the
same table.
This was reported by Peter Bailis as bug #11732, by Sean Chittenden
as bug #13667, and by others.
The race condition was eliminated in heap_insert() by moving the
check down below the acquisition of the buffer lock, which had been
the very next statement. Because of the loop locking and unlocking
multiple buffers in heap_multi_insert() a check was added after all
inserts were completed. The check before the start of the inserts
was left because it might avoid a large amount of work to detect a
serialization anomaly before performing the all of the inserts and
the related WAL logging.
While investigating this bug, other SSI bugs which were even harder
to hit in practice were noticed and fixed, an unnecessary check
(covered by another check, so redundant) was removed from
heap_update(), and comments were improved.
Back-patch to all supported branches.
Kevin Grittner and Thomas Munro
|
| |
|
|
|
| |
Message style, plurals, quoting, spelling, consistency with similar
messages
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A bug in the original free space computation made it possible to
return a page which wasn't actually able to fit the item. Since the
insertion code isn't prepared to deal with PageAddItem failing, a PANIC
resulted ("failed to add BRIN tuple [to new page]"). Add a macro to
encapsulate the correct computation, and use it in
brin_getinsertbuffer's callers before calling that routine, to raise an
early error.
I became aware of the possiblity of a problem in this area while working
on ccc4c074994d734. There's no archived discussion about it, but it's
easy to reproduce a problem in the unpatched code with something like
CREATE TABLE t (a text);
CREATE INDEX ti ON t USING brin (a) WITH (pages_per_range=1);
for length in `seq 8000 8196`
do
psql -f - <<EOF
TRUNCATE TABLE t;
INSERT INTO t VALUES ('z'), (repeat('a', $length));
EOF
done
Backpatch to 9.5, where BRIN was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Further tweak commit_ts.c so that on a standby the state is completely
consistent with what that in the master, rather than behaving
differently in the cases that the settings differ. Now in standby and
master the module should always be active or inactive in lockstep.
Author: Petr Jelínek, with some further tweaks by Álvaro Herrera.
Backpatch to 9.5, where commit timestamps were introduced.
Discussion: http://www.postgresql.org/message-id/5622BF9D.2010409@2ndquadrant.com
|
| |
|
|
|
|
|
|
|
| |
check_role() tries to verify that the user has permission to become the
requested role, but this is inappropriate in a parallel worker, which
needs to exactly recreate the master's authorization settings. So skip
the check in that case.
This fixes a bug in commit 924bcf4f16d54c55310b28f77686608684734f42.
|
| |
|
|
|
|
|
|
|
|
| |
Starting a parallel worker transaction changes our notion of which XIDs
are in-progress or committed, and our notion of the current command
counter ID. Therefore, our view of these caches prior to starting
this transaction may no longer valid. Defend against that by clearing
them.
This fixes a bug in commit 924bcf4f16d54c55310b28f77686608684734f42.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 924bcf4f16d54c55310b28f77686608684734f42 failed to enforce
parallel mode checks during the commit of a parallel worker, because
we exited parallel mode prior to ending the transaction so that we
could pop the active snapshot. Re-establish parallel mode during
parallel worker commit. Without this, it's far too easy for unsafe
actions during the pre-commit sequence to crash the server instead of
hitting the error checks as intended.
Just to be extra paranoid, adjust a couple of the sanity checks in
xact.c to check not only IsInParallelMode() but also
IsParallelWorker().
|
| |
|
|
|
|
|
|
| |
Commit 924bcf4f16d54c55310b28f77686608684734f42 correctly forbade
parallel workers to modify the command counter while in parallel mode,
but it inexplicably neglected to actually transfer the current command
counter from leader to workers. This can result in the workers seeing
a different set of tuples from the leader, which is bad. Repair.
|
| |
|
|
|
|
|
|
|
|
|
| |
Commit 2bd9e412f92bc6a68f3e8bcb18e04955cc35001d introduced a mechanism
for relaying protocol messages from a background worker to another
backend via a shm_mq. However, there was no provision for shutting
down the communication channel. Therefore, a protocol message sent
late in the shutdown sequence, such as a DEBUG message resulting from
cranking up log_min_messages, could crash the server. To fix, install
an on_dsm_detach callback that disables sending messages to the shm_mq
when the associated DSM is detached.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
In 020235a5754 I lowered the autovacuum_*freeze_max_age minimums to
allow for easier testing of wraparounds. I did not touch the
corresponding per-table limits. While those don't matter for the purpose
of wraparound, it seems more consistent to lower them as well.
It's noteworthy that the previous reloption lower limit for
autovacuum_multixact_freeze_max_age was too high by one magnitude, even
before 020235a5754.
Discussion: 26377.1443105453@sss.pgh.pa.us
Backpatch: back to 9.0 (in parts), like the prior patch
|
| |
|
|
| |
Bug noticed by Fujii Masao
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Module initialization was still not completely correct after commit
6b61955135e9, per crash report from Takashi Ohnishi. To fix, instead of
trying to monkey around with the value of the GUC setting directly, add
a separate boolean flag that enables the feature on a standby, but only
for the startup (recovery) process, when it sees that its master server
has the feature enabled.
Discussion: http://www.postgresql.org/message-id/ca44c6c7f9314868bdc521aea4f77cbf@MP-MSGSS-MBX004.msg.nttdata.co.jp
Also change the deactivation routine to delete all segment files rather
than leaving the last one around. (This doesn't need separate
WAL-logging, because on recovery we execute the same deactivation
routine anyway.)
In passing, clean up the code structure somewhat, particularly so that
xlog.c doesn't know so much about when to activate/deactivate the
feature.
Thanks to Fujii Masao for testing and Petr Jelínek for off-list discussion.
Back-patch to 9.5, where commit_ts was introduced.
|
| |
|
|
|
|
| |
If a transaction or subtransaction creates a ParallelContext but ends
without calling InitializeParallelDSM, the previous code would
seg fault. Fix that.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are three main changes here:
1. No longer cause a start failure in a standby if the feature is
disabled in postgresql.conf but enabled in the master. This reverts one
part of commit 4f3924d9cd43; what we keep is the ability of the standby
to activate/deactivate the module (which includes creating and removing
segments as appropriate) during replay of such actions in the master.
2. Replay WAL records affecting commitTS even if the feature is
disabled. This means the standby will always have the same state as the
master after replay.
3. Have COMMIT PREPARE record the transaction commit time as well. We
were previously only applying it in the normal transaction commit path.
Author: Petr Jelínek
Discussion: http://www.postgresql.org/message-id/CAHGQGwHereDzzzmfxEBYcVQu3oZv6vZcgu1TPeERWbDc+gQ06g@mail.gmail.com
Discussion: http://www.postgresql.org/message-id/CAHGQGwFuzfO4JscM9LCAmCDCxp_MfLvN4QdB+xWsS-FijbjTYQ@mail.gmail.com
Additionally, I cleaned up nearby code related to replication origins,
which I found a bit hard to follow, and fixed a couple of typos.
Backpatch to 9.5, where this code was introduced.
Per bug reports from Fujii Masao and subsequent discussion.
|
| |
|
|
|
|
|
| |
It was introduced alongside replication origins, by commit
5aa2350426c, so backpatch to 9.5.
Pointed out by Fujii Masao
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
In 9.5 and master there is no need to support legacy truncation. This is
just committed separately to make it easier to backpatch the WAL logged
multixact truncation to 9.3 and 9.4 if we later decide to do so.
I bumped master's magic from 0xD086 to 0xD088 and 9.5's from 0xD085 to
0xD087 to avoid 9.5 reusing a value that has been in use on master while
keeping the numbers increasing between major versions.
Discussion: 20150621192409.GA4797@alap3.anarazel.de
Backpatch: 9.5
|
