| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
| |
I removed an intermediate commit before pushing and forgot to test the
resulting tree :-(
|
| |
|
|
|
|
|
|
| |
Instead of simply checking the KEYS_UPDATED bit, we need to check
whether each lock held on the future version of the tuple conflicts with
the lock we're trying to acquire.
Per bug report #8434 by Tomonari Katsumata
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Not doing so causes us to traverse an update chain that has been broken
by concurrent page pruning. All other code that traverses update chains
uses this check as one of the cases in which to stop iterating, so
replicate it here too. Failure to do so leads to erroneous CLOG,
subtrans or multixact lookups.
Per discussion following the bug report by J Smith in
CADFUPgc5bmtv-yg9znxV-vcfkb+JPRqs7m2OesQXaM_4Z1JpdQ@mail.gmail.com
as diagnosed by Andres Freund.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a transaction updates/deletes a tuple just before aborting, and a
concurrent transaction tries to prune the page concurrently, the pruner
may see HeapTupleSatisfiesVacuum return HEAPTUPLE_DELETE_IN_PROGRESS,
but a later call to HeapTupleGetUpdateXid() return InvalidXid. This
would cause an assertion failure in development builds, but would be
otherwise Mostly Harmless.
Fix by checking whether the updater Xid is valid before trying to apply
it as page prune point.
Reported by Andres in 20131124000203.GA4403@alap2.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
| |
The reason for the fetch failure is that the tuple was removed because
it was dead; so the failure is innocuous and can be ignored. Moreover,
there's no need for further work and we can return success to the caller
immediately. EvalPlanQualFetch is doing something very similar to this
already.
Report and test case from Andres Freund in
20131124000203.GA4403@alap2.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace it with an approach similar to what GiST uses: when a page is split,
the left sibling is marked with a flag indicating that the parent hasn't been
updated yet. When the parent is updated, the flag is cleared. If an insertion
steps on a page with the flag set, it will finish split before proceeding
with the insertion.
The post-recovery cleanup mechanism was never totally reliable, as insertion
to the parent could fail e.g because of running out of memory or disk space,
leaving the tree in an inconsistent state.
This also divides the responsibility of WAL-logging more clearly between
the generic ginbtree.c code, and the parts specific to entry and posting
trees. There is now a common WAL record format for insertions and deletions,
which is written by ginbtree.c, followed by tree-specific payload, which is
returned by the placetopage- and split- callbacks.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Separate the insertion payload from the more static portions of GinBtree.
GinBtree now only contains information related to searching the tree, and
the information of what to insert is passed separately.
Add root block number to GinBtree, instead of passing it around all the
functions as argument.
Split off ginFinishSplit() from ginInsertValue(). ginFinishSplit is
responsible for finding the parent and inserting the downlink to it.
|
| |
|
|
|
|
|
| |
Change SET LOCAL/CONSTRAINTS/TRANSACTION behavior outside of a
transaction block from error (post-9.3) to warning. (Was nothing in <=
9.3.) Also change ABORT outside of a transaction block from notice to
warning.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
These bugs can cause data loss on standbys started with hot_standby=on at
the moment they start to accept read only queries, by marking committed
transactions as uncommited. The likelihood of such corruptions is small
unless the primary has a high transaction rate.
5a031a5556ff83b8a9646892715d7fef415b83c3 fixed bugs in HS's startup logic
by maintaining less state until at least STANDBY_SNAPSHOT_PENDING state
was reached, missing the fact that both clog and subtrans are written to
before that. This only failed to fail in common cases because the usage
of ExtendCLOG in procarray.c was superflous since clog extensions are
actually WAL logged.
f44eedc3f0f347a856eea8590730769125964597/I then tried to fix the missing
extensions of pg_subtrans due to the former commit's changes - which are
not WAL logged - by performing the extensions when switching to a state
> STANDBY_INITIALIZED and not performing xid assignments before that -
again missing the fact that ExtendCLOG is unneccessary - but screwed up
twice: Once because latestObservedXid wasn't updated anymore in that
state due to the earlier commit and once by having an off-by-one error in
the loop performing extensions. This means that whenever a
CLOG_XACTS_PER_PAGE (32768 with default settings) boundary was crossed
between the start of the checkpoint recovery started from and the first
xl_running_xact record old transactions commit bits in pg_clog could be
overwritten if they started and committed in that window.
Fix this mess by not performing ExtendCLOG() in HS at all anymore since
it's unneeded and evidently dangerous and by performing subtrans
extensions even before reaching STANDBY_SNAPSHOT_PENDING.
Analysis and patch by Andres Freund. Reported by Christophe Pettus.
Backpatch down to 9.0, like the previous commit that caused this.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
RecoveryIsInProgress() can be called very frequently. During normal
operation, it just checks a backend-local variable and returns quickly,
but during hot standby, it checks a spinlock-protected shared variable.
Those spinlock acquisitions can become a point of contention on a busy
hot standby system.
Replace the spinlock acquisition with a memory barrier.
Per discussion with Andres Freund, Ants Aasma and Merlin Moncure.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds the ability to write TABLE( function1(), function2(), ...)
as a single FROM-clause entry. The result is the concatenation of the
first row from each function, followed by the second row from each
function, etc; with NULLs inserted if any function produces fewer rows than
others. This is believed to be a much more useful behavior than what
Postgres currently does with multiple SRFs in a SELECT list.
This syntax also provides a reasonable way to combine use of column
definition lists with WITH ORDINALITY: put the column definition list
inside TABLE(), where it's clear that it doesn't control the ordinality
column as well.
Also implement SQL-compliant multiple-argument UNNEST(), by turning
UNNEST(a,b,c) into TABLE(unnest(a), unnest(b), unnest(c)).
The SQL standard specifies TABLE() with only a single function, not
multiple functions, and it seems to require an implicit UNNEST() which is
not what this patch does. There may be something wrong with that reading
of the spec, though, because if it's right then the spec's TABLE() is just
a pointless alternative spelling of UNNEST(). After further review of
that, we might choose to adopt a different syntax for what this patch does,
but in any case this functionality seems clearly worthwhile.
Andrew Gierth, reviewed by Zoltán Böszörményi and Heikki Linnakangas, and
significantly revised by me
|
| |
|
|
|
|
|
|
|
|
|
| |
Split off the portion of ginInsertValue that inserts the tuple to current
level into a separate function, ginPlaceToPage. ginInsertValue's charter
is now to recurse up the tree to insert the downlink, when a page split is
required.
This is in preparation for a patch to change the way incomplete splits are
handled, which will need to do these operations separately. And IMHO makes
the code more readable anyway.
|
| |
|
|
|
|
| |
This creates a new gin-btree callback function for creating a downlink for
a page. Previously, ginxlog.c duplicated the logic used during normal
operation.
|
| |
|
|
|
| |
Merge some functions that were always called together. Makes the code
little bit more readable.
|
| |
|
|
|
|
|
|
|
|
| |
The root page is filled with as many items as fit, and the rest are inserted
using normal insertions. However, I fumbled the variable names, and the code
actually memcpy'd all the items on the page, overflowing the buffer. While
at it, rename the variable to make the distinction more clear.
Reported by Teodor Sigaev. This bug was introduced by my recent
refactorings, so no backpatching required.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a page is deleted, and reused for something else, just as a search is
following a rightlink to it from its left sibling, the search would continue
scanning whatever the new contents of the page are. That could lead to
incorrect query results, or even something more curious if the page is
reused for a different kind of a page.
To fix, modify the search algorithm to lock the next page before releasing
the previous one, and refrain from deleting pages from the leftmost branch
of the tree.
Add a new Concurrency section to the README, explaining why this works.
There is a lot more one could say about concurrency in GIN, but that's for
another patch.
Backpatch to all supported versions.
|
| |
|
|
| |
Broken by my refactoring.
|
| |
|
|
| |
Not sure how I missed these in previous commit.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Merge the isEnoughSpace and placeToPage functions in the b-tree interface
into one function that tries to put a tuple on page, and returns false if
it doesn't fit.
Move createPostingTree function to gindatapage.c, and change its contract
so that it can be passed more items than fit on the root page. It's in a
better position than the callers to know how many items fit.
Move ginMergeItemPointers out of gindatapage.c, into a separate file.
These changes make no difference now, but reduce the footprint of Alexander
Korotkov's upcoming patch to pack item pointers more tightly.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Historically, printtup() has assumed that it could prevent memory leakage
by pfree'ing the string result of each output function and manually
managing detoasting of toasted values. This amounts to assuming that
datatype output functions never leak any memory internally; an assumption
we've already decided to be bogus elsewhere, for example in COPY OUT.
range_out in particular is known to leak multiple kilobytes per call, as
noted in bug #8573 from Godfried Vanluffelen. While we could go in and fix
that leak, it wouldn't be very notationally convenient, and in any case
there have been and undoubtedly will again be other leaks in other output
functions. So what seems like the best solution is to run the output
functions in a temporary memory context that can be reset after each row,
as we're doing in COPY OUT. Some quick experimentation suggests this is
actually a tad faster than the retail pfree's anyway.
This patch fixes all the variants of printtup, except for debugtup()
which is used in standalone mode. It doesn't seem worth worrying
about query-lifespan leaks in standalone mode, and fixing that case
would be a bit tedious since debugtup() doesn't currently have any
startup or shutdown functions.
While at it, remove manual detoast management from several other
output-function call sites that had copied it from printtup(). This
doesn't make a lot of difference right now, but in view of recent
discussions about supporting "non-flattened" Datums, we're going to
want that code gone eventually anyway.
Back-patch to 9.2 where range_out was introduced. We might eventually
decide to back-patch this further, but in the absence of known major
leaks in older output functions, I'll refrain for now.
|
| |
|
|
|
|
|
|
|
| |
The original coding thought this case was impossible, but it can happen
if the bgwriter or checkpointer processes decide to write out an index
page while creation is still proceeding, leading to a bogus "unexpected
spgdoinsert() failure" error. Problem reported by Jonathan S. Katz.
Teodor Sigaev
|
| |
|
|
|
|
|
| |
This shaves a few cycles, and generally seems like good programming
practice.
David Rowley
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The C and POSIX standards state that strncpy's behavior is undefined when
source and destination areas overlap. While it remains dubious whether any
implementations really misbehave when the pointers are exactly equal, some
platforms are now starting to force the issue by complaining when an
undefined call occurs. (In particular OS X 10.9 has been seen to dump core
here, though the exact set of circumstances needed to trigger that remain
elusive. Similar behavior can be expected to be optional on Linux and
other platforms in the near future.) So tweak the code to explicitly do
nothing when nothing need be done.
Back-patch to all active branches. In HEAD, this also lets us get rid of
an exception in valgrind.supp.
Per discussion of a report from Matthias Schmitt.
|
| | |
|
| |
|
|
|
|
|
|
| |
This avoids an assumption about the signed number representation. It is
anticipated to have no functional changes on supported configurations;
many two's complement assumptions remain elsewhere.
Per a suggestion from Andres Freund.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The TYPEALIGN macro, and the related ones like MAXALIGN, don't work with
values larger than intptr_t, because TYPEALIGN casts the argument to
intptr_t to do the arithmetic. That's not a problem when dealing with
pointers or lengths or offsets related to pointers, but the XLogInsert
scaling patch added a call to MAXALIGN with an XLogRecPtr argument.
To fix, add wider variants of the macros, called TYPEALIGN64 and MAXALIGN64,
which are just like the existing variants but work with uint64 instead of
intptr_t.
Report and patch by David Rowley, analysis by Andres Freund.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
1. In heap_hot_search_buffer(), the PredicateLockTuple() call is passed
wrong offset number. heapTuple->t_self is set to the tid of the first
tuple in the chain that's visited, not the one actually being read.
2. CheckForSerializableConflictIn() uses the tuple's t_ctid field
instead of t_self to check for exiting predicate locks on the tuple. If
the tuple was updated, but the updater rolled back, t_ctid points to the
aborted dead tuple.
Reported by Hannu Krosing. Backpatch to 9.1.
|
| |
|
|
|
|
|
|
|
|
|
| |
It makes for cleaner code to have separate Get/Add functions for PostingItems
and ItemPointers. A few callsites that have to deal with both types need to
be duplicated because of this, but all the callers have to know which one
they're dealing with anyway. Overall, this reduces the amount of casting
required.
Extracted from Alexander Korotkov's larger patch to change the data page
format.
|
| | |
|
| |
|
|
| |
Etsuro Fujita
|
| |
|
|
|
|
|
|
|
| |
It seems to make more sense to use "cutoff multixact" terminology
throughout the backend code; "freeze" is associated with replacing of an
Xid with FrozenTransactionId, which is not what we do for MultiXactIds.
Andres Freund
Some adjustments by Álvaro Herrera
|
| |
|
|
| |
Bernd Helmle
|
| |
|
|
|
|
|
| |
This allows a 32-bit field to represent an *optional* command ID
without a separate flag bit.
Andres Freund
|
| |
|
|
|
|
|
|
|
|
| |
This reverts commit 269e780822abb2e44189afaccd6b0ee7aefa7ddd
and commit 5b571bb8c8d2bea610e01ae1ee7bc05adcfff528.
Unfortunately, the initial patch had insufficient performance testing,
and resulted in a regression.
Per report by Thom Brown.
|
| |
|
|
|
|
|
| |
Performance testing shows that if the insertpos_lck spinlock and the fields
that it protects are on the same cache line with other variables that are
frequently accessed, the false sharing can hurt performance a lot. Keep
them apart by adding some padding.
|
| |
|
|
|
|
|
|
|
|
| |
This keeps the usual trigger file name unchanged from 9.2, avoiding nasty
issues if you use a pre-9.3 pg_ctl binary with a 9.3 server or vice versa.
The fallback behavior of creating a full checkpoint before starting up is now
triggered by a file called "fallback_promote". That can be useful for
debugging purposes, but we don't expect any users to have to resort to that
and we might want to remove that in the future, which is why the fallback
mechanism is undocumented.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
When upgrading from servers of versions 9.2 and older, and MultiXactIds
have been used in the old server beyond the first page (that is, 2048
multis or more in the default 8kB-page build), pg_upgrade would set the
next multixact offset to use beyond what has been allocated in the new
cluster. This would cause a failure the first time the new cluster
needs to use this value, because the pg_multixact/offsets/ file wouldn't
exist or wouldn't be large enough. To fix, ensure that the transient
server instances launched by pg_upgrade extend the file as necessary.
Per report from Jesse Denardo in
CANiVXAj4c88YqipsyFQPboqMudnjcNTdB3pqe8ReXqAFQ=HXyA@mail.gmail.com
|
| | |
|
| |
|
|
|
| |
Author: Andrew Gierth, David Fetter
Reviewers: Dean Rasheed, Jeevan Chalke, Stephen Frost
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
| |
As far as I can determine, there's no code in the core distribution
that fails to explicitly set the snapshot of a scan or executor
state. If there is any such code, this will probably cause it to
seg fault; friendlier suggestions were discussed on pgsql-hackers,
but there was no consensus that anything more than this was
needed.
This is another step towards the hoped-for complete removal of
SnapshotNow.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, these functions took a HeapTupleHeader, but upcoming
patches for logical replication will introduce new a new snapshot
type under which the tuple's TID will be used to lookup (CMIN, CMAX)
for visibility determination purposes. This makes that information
available. Code churn is minimal since HeapTupleSatisfiesVisibility
took the HeapTuple anyway, and deferenced it before calling the
satisfies function.
Independently of logical replication, this allows t_tableOid and
t_self to be cross-checked via assertions in tqual.c. This seems
like a useful way to make sure that all callers are setting these
values properly, which has been previously put forward as
desirable.
Andres Freund, reviewed by Álvaro Herrera
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
For simple views which are automatically updatable, this patch allows
the user to specify what level of checking should be done on records
being inserted or updated. For 'LOCAL CHECK', new tuples are validated
against the conditionals of the view they are being inserted into, while
for 'CASCADED CHECK' the new tuples are validated against the
conditionals for all views involved (from the top down).
This option is part of the SQL specification.
Dean Rasheed, reviewed by Pavel Stehule
|
| |
|
|
|
|
|
| |
Also, in another comment, explain why holding an insertion slot is a
critical section.
Per review by Amit Kapila.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Initialization of the first XLOG buffer at end-of-recovery was broken for
the case that the last read WAL record ended at a page boundary. Instead of
trying to copy the last full xlog page to the buffer cache in that case,
just set shared state so that the next page is initialized when the first
WAL record after startup is inserted. (that's what we did in earlier
version, too)
To make the shared state required for that case less surprising, replace the
XLogCtl->curridx variable, which was the index of the latest initialized
buffer, with an XLogRecPtr of how far the buffers have been initialized.
That also allows us to get rid of the XLogRecEndPtrToBufIdx macro.
While we're at it, make a similar change for XLogCtl->Write.curridx, getting
rid of that variable and calculating the next buffer to write from
XLogCtl->LogwrtResult instead.
|
| |
|
|
|
|
|
|
| |
Since this function assumed non-MVCC snapshots, it broke when commit
568d4138c646cd7cd8a837ac244ef2caf27c6bb8 switched its one caller from
SnapshotNow scans to MVCC-snapshot scans.
Reviewed by Robert Haas, Tom Lane and Andres Freund.
|
| |
|
|
|
|
| |
Was broken by my xloginsert scaling patch. XLogCtl global variable needs
to be initialized in each process, as it's not inherited by fork() on
Windows.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch replaces WALInsertLock with a number of WAL insertion slots,
allowing multiple backends to insert WAL records to the WAL buffers
concurrently. This is particularly useful for parallel loading large amounts
of data on a system with many CPUs.
This has one user-visible change: switching to a new WAL segment with
pg_switch_xlog() now fills the remaining unused portion of the segment with
zeros. This potentially adds some overhead, but it has been a very common
practice by DBA's to clear the "tail" of the segment with an external
pg_clearxlogtail utility anyway, to make the WAL files compress better.
With this patch, it's no longer necessary to do that.
This patch adds a new GUC, xloginsert_slots, to tune the number of WAL
insertion slots. Performance testing suggests that the default, 8, works
pretty well for all kinds of worklods, but I left the GUC in place to allow
others with different hardware to test that easily. We might want to remove
that before release.
Reviewed by Andres Freund.
|
| |
|
|
|
|
|
|
|
| |
On some platforms, posix_fallocate() is available but may still return
EINVAL if the underlying filesystem does not support it. So, in case
of an error, fall through to the alternate implementation that just
writes zeros.
Per buildfarm failure and analysis by Tom Lane.
|
| |
|
|
|
| |
All instances of the verbiage lagging the code. Back-patch to 9.3,
where materialized views were introduced.
|
