| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
| |
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This enables changing permanent (logged) tables to unlogged and
vice-versa.
(Docs for ALTER TABLE / SET TABLESPACE got shuffled in an order that
hopefully makes more sense than the original.)
Author: Fabrízio de Royes Mello
Reviewed by: Christoph Berg, Andres Freund, Thom Brown
Some tweaking by Álvaro Herrera
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
We were allowing a table's pg_class.relminmxid value to move backwards
when heaps were swapped by VACUUM FULL or CLUSTER. There is a
similar protection against relfrozenxid going backwards, which we
neglected to clone when the multixact stuff was rejiggered by commit
0ac5ad5134f276.
Backpatch to 9.3, where relminmxid was introduced.
As reported by Heikki in
http://www.postgresql.org/message-id/52401AEA.9000608@vmware.com
|
| |
|
|
|
| |
This includes removing tabs after periods in C comments, which was
applied to back branches, so this change should not effect backpatching.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
VALIDATE CONSTRAINT
CLUSTER ON
SET WITHOUT CLUSTER
ALTER COLUMN SET STATISTICS
ALTER COLUMN SET ()
ALTER COLUMN RESET ()
All other sub-commands use AccessExclusiveLock
Simon Riggs and Noah Misch
Reviews by Robert Haas and Andres Freund
|
| |
|
|
|
|
|
|
|
|
| |
pg_class is a special case for CLUSTER and VACUUM FULL, so although
commit 3cff1879f8d03cb729368722ca823a4bf74c0cac caused these
operations to advance relfrozenxid and relminmxid for all other
tables, it did not provide the same benefit for pg_class. This
plugs that gap.
Andres Freund
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This feature, building on previous commits, allows the write-ahead log
stream to be decoded into a series of logical changes; that is,
inserts, updates, and deletes and the transactions which contain them.
It is capable of handling decoding even across changes to the schema
of the effected tables. The output format is controlled by a
so-called "output plugin"; an example is included. To make use of
this in a real replication system, the output plugin will need to be
modified to produce output in the format appropriate to that system,
and to perform filtering.
Currently, information can be extracted from the logical decoding
system only via SQL; future commits will add the ability to stream
changes via walsender.
Andres Freund, with review and other contributions from many other
people, including Álvaro Herrera, Abhijit Menon-Sen, Peter Gheogegan,
Kevin Grittner, Robert Haas, Heikki Linnakangas, Fujii Masao, Abhijit
Menon-Sen, Michael Paquier, Simon Riggs, Craig Ringer, and Steve
Singer.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously we were piggybacking on transaction ID parameters to freeze
multixacts; but since there isn't necessarily any relationship between
rates of Xid and multixact consumption, this turns out not to be a good
idea.
Therefore, we now have multixact-specific freezing parameters:
vacuum_multixact_freeze_min_age: when to remove multis as we come across
them in vacuum (default to 5 million, i.e. early in comparison to Xid's
default of 50 million)
vacuum_multixact_freeze_table_age: when to force whole-table scans
instead of scanning only the pages marked as not all visible in
visibility map (default to 150 million, same as for Xids). Whichever of
both which reaches the 150 million mark earlier will cause a whole-table
scan.
autovacuum_multixact_freeze_max_age: when for cause emergency,
uninterruptible whole-table scans (default to 400 million, double as
that for Xids). This means there shouldn't be more frequent emergency
vacuuming than previously, unless multixacts are being used very
rapidly.
Backpatch to 9.3 where multixacts were made to persist enough to require
freezing. To avoid an ABI break in 9.3, VacuumStmt has a couple of
fields in an unnatural place, and StdRdOptions is split in two so that
the newly added fields can go at the end.
Patch by me, reviewed by Robert Haas, with additional input from Andres
Freund and Tom Lane.
|
| |
|
|
| |
Sawada Masahiko
|
| |
|
|
|
| |
Update all files in head, and files COPYRIGHT and legal.sgml in all back
branches.
|
| |
|
|
|
|
|
|
|
| |
We haven't wanted to do this in the past on the grounds that in rare
cases the original xmin value will be needed for forensic purposes, but
commit 37484ad2aacef5ec794f4dd3d5cf814475180a78 removes that objection,
so now we can.
Per extensive discussion, among many people, on pgsql-hackers.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While autovacuum dutifully launched anti-multixact-wraparound vacuums
when the multixact "age" was reached, the vacuum code was not aware that
it needed to make them be full table vacuums. As the resulting
partial-table vacuums aren't capable of actually increasing relminmxid,
autovacuum continued to launch anti-wraparound vacuums that didn't have
the intended effect, until age of relfrozenxid caused the vacuum to
finally be a full table one via vacuum_freeze_table_age.
To fix, introduce logic for multixacts similar to that for plain
TransactionIds, using the same GUCs.
Backpatch to 9.3, where permanent MultiXactIds were introduced.
Andres Freund, some cleanup by Álvaro
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Although user-defined relations can't be directly created in
pg_catalog, it's possible for them to end up there, because you can
create them in some other schema and then use ALTER TABLE .. SET SCHEMA
to move them there. Previously, such relations couldn't afterwards
be manipulated, because IsSystemRelation()/IsSystemClass() rejected
all attempts to modify objects in the pg_catalog schema, regardless
of their origin. With this patch, they now reject only those
objects in pg_catalog which were created at initdb-time, allowing
most operations on user-created tables in pg_catalog to proceed
normally.
This patch also adds new functions IsCatalogRelation() and
IsCatalogClass(), which is similar to IsSystemRelation() and
IsSystemClass() but with a slightly narrower definition: only TOAST
tables of system catalogs are included, rather than *all* TOAST tables.
This is currently used only for making decisions about when
invalidation messages need to be sent, but upcoming logical decoding
patches will find other uses for this information.
Andres Freund, with some modifications by me.
|
| |
|
|
|
|
|
|
|
| |
It seems to make more sense to use "cutoff multixact" terminology
throughout the backend code; "freeze" is associated with replacing of an
Xid with FrozenTransactionId, which is not what we do for MultiXactIds.
Andres Freund
Some adjustments by Álvaro Herrera
|
| |
|
|
|
|
|
|
| |
We now use MVCC catalog scans, and, per discussion, have eliminated
all other remaining uses of SnapshotNow, so that we can now get rid of
it. This will break third-party code which is still using it, which
is intentional, as we want such code to be updated to do things the
new way.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, these functions took a HeapTupleHeader, but upcoming
patches for logical replication will introduce new a new snapshot
type under which the tuple's TID will be used to lookup (CMIN, CMAX)
for visibility determination purposes. This makes that information
available. Code churn is minimal since HeapTupleSatisfiesVisibility
took the HeapTuple anyway, and deferenced it before calling the
satisfies function.
Independently of logical replication, this allows t_tableOid and
t_self to be cross-checked via assertions in tqual.c. This seems
like a useful way to make sure that all callers are setting these
values properly, which has been previously put forward as
desirable.
Andres Freund, reviewed by Álvaro Herrera
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This allows reads to continue without any blocking while a REFRESH
runs. The new data appears atomically as part of transaction
commit.
Review questioned the Assert that a matview was not a system
relation. This will be addressed separately.
Reviewed by Hitoshi Harada, Robert Haas, Andres Freund.
Merged after review with security patch f3ab5d4.
|
| |
|
|
|
|
|
|
|
|
| |
Treat TOAST index just the same as normal one and get the OID
of TOAST index from pg_index but not pg_class.reltoastidxid.
This change allows us to handle multiple TOAST indexes, and
which is required infrastructure for upcoming
REINDEX CONCURRENTLY feature.
Patch by Michael Paquier, reviewed by Andres Freund and me.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
SnapshotNow scans have the undesirable property that, in the face of
concurrent updates, the scan can fail to see either the old or the new
versions of the row. In many cases, we work around this by requiring
DDL operations to hold AccessExclusiveLock on the object being
modified; in some cases, the existing locking is inadequate and random
failures occur as a result. This commit doesn't change anything
related to locking, but will hopefully pave the way to allowing lock
strength reductions in the future.
The major issue has held us back from making this change in the past
is that taking an MVCC snapshot is significantly more expensive than
using a static special snapshot such as SnapshotNow. However, testing
of various worst-case scenarios reveals that this problem is not
severe except under fairly extreme workloads. To mitigate those
problems, we avoid retaking the MVCC snapshot for each new scan;
instead, we take a new snapshot only when invalidation messages have
been processed. The catcache machinery already requires that
invalidation messages be sent before releasing the related heavyweight
lock; else other backends might rely on locally-cached data rather
than scanning the catalog at all. Thus, making snapshot reuse
dependent on the same guarantees shouldn't break anything that wasn't
already subtly broken.
Patch by me. Review by Michael Paquier and Andres Freund.
|
| |
|
|
|
| |
This is the first run of the Perl-based pgindent script. Also update
pgindent instructions.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Previously this state was represented by whether the view's disk file had
zero or nonzero size, which is problematic for numerous reasons, since it's
breaking a fundamental assumption about heap storage. This was done to
allow unlogged matviews to revert to unpopulated status after a crash
despite our lack of any ability to update catalog entries post-crash.
However, this poses enough risk of future problems that it seems better to
not support unlogged matviews until we can find another way. Accordingly,
revert that choice as well as a number of existing kluges forced by it
in favor of creating a pg_class.relispopulated flag column.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The intent was that being populated would, long term, be just one
of the conditions which could affect whether a matview was
scannable; being populated should be necessary but not always
sufficient to scan the relation. Since only CREATE and REFRESH
currently determine the scannability, names and comments
accidentally conflated these concepts, leading to confusion.
Also add missing locking for the SQL function which allows a
test for scannability, and fix a modularity violatiion.
Per complaints from Tom Lane, although its not clear that these
will satisfy his concerns. Hopefully this will at least better
frame the discussion.
|
| |
|
|
|
|
|
| |
This also slightly widens the scope of what we support in terms of
post-create events.
KaiGai Kohei, with a few changes, mostly to the comments, by me
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com
1290721684-sup-3951@alvh.no-ip.org
1294953201-sup-2099@alvh.no-ip.org
1320343602-sup-2290@alvh.no-ip.org
1339690386-sup-8927@alvh.no-ip.org
4FE5FF020200002500048A3D@gw.wicourts.gov
4FEAB90A0200002500048B7D@gw.wicourts.gov
|
| |
|
|
|
| |
Fully update git head, and update back branches in ./COPYRIGHT and
legal.sgml files.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 8cb53654dbdb4c386369eb988062d0bbb6de725e, which introduced DROP
INDEX CONCURRENTLY, managed to break CREATE INDEX CONCURRENTLY via a poor
choice of catalog state representation. The pg_index state for an index
that's reached the final pre-drop stage was the same as the state for an
index just created by CREATE INDEX CONCURRENTLY. This meant that the
(necessary) change to make RelationGetIndexList ignore about-to-die indexes
also made it ignore freshly-created indexes; which is catastrophic because
the latter do need to be considered in HOT-safety decisions. Failure to
do so leads to incorrect index entries and subsequently wrong results from
queries depending on the concurrently-created index.
To fix, add an additional boolean column "indislive" to pg_index, so that
the freshly-created and about-to-die states can be distinguished. (This
change obviously is only possible in HEAD. This patch will need to be
back-patched, but in 9.2 we'll use a kluge consisting of overloading the
formerly-impossible state of indisvalid = true and indisready = false.)
In addition, change CREATE/DROP INDEX CONCURRENTLY so that the pg_index
flag changes they make without exclusive lock on the index are made via
heap_inplace_update() rather than a normal transactional update. The
latter is not very safe because moving the pg_index tuple could result in
concurrent SnapshotNow scans finding it twice or not at all, thus possibly
resulting in index corruption. This is a pre-existing bug in CREATE INDEX
CONCURRENTLY, which was copied into the DROP code.
In addition, fix various places in the code that ought to check to make
sure that the indexes they are manipulating are valid and/or ready as
appropriate. These represent bugs that have existed since 8.2, since
a failed CREATE INDEX CONCURRENTLY could leave a corrupt or invalid
index behind, and we ought not try to do anything that might fail with
such an index.
Also fix RelationReloadIndexInfo to ensure it copies all the pg_index
columns that are allowed to change after initial creation. Previously we
could have been left with stale values of some fields in an index relcache
entry. It's not clear whether this actually had any user-visible
consequences, but it's at least a bug waiting to happen.
In addition, do some code and docs review for DROP INDEX CONCURRENTLY;
some cosmetic code cleanup but mostly addition and revision of comments.
This will need to be back-patched, but in a noticeably different form,
so I'm committing it to HEAD before working on the back-patch.
Problem reported by Amit Kapila, diagnosis by Pavan Deolassee,
fix by Tom Lane and Andres Freund.
|
| |
|
|
|
|
|
|
|
| |
... and have sepgsql use it to determine whether to check permissions
during certain operations. Indexes that are being created as a result
of REINDEX, for instance, do not need to have their permissions checked;
they were already checked when the index was created.
Author: KaiGai Kohei, slightly revised by me
|
| |
|
|
|
|
|
|
|
|
| |
The latter was already the dominant use, and it's preferable because
in C the convention is that intXX means XX bits. Therefore, allowing
mixed use of int2, int4, int8, int16, int32 is obviously confusing.
Remove the typedefs for int2 and int4 for now. They don't seem to be
widely used outside of the PostgreSQL source tree, and the few uses
can probably be cleaned up by the time this ships.
|
| |
|
|
| |
commit-fest.
|
| |
|
|
|
|
|
| |
This doesn't do anything useful just yet, but is intended as supporting
infrastructure for allowing sepgsql to sensibly check DROP permissions.
KaiGai Kohei and Robert Haas
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit 7b0d0e9356963d5c3e4d329a917f5fbb82a2ef05, I made CLUSTER and
VACUUM FULL try to preserve toast value OIDs from the original toast table
to the new one. However, if we have to copy both live and recently-dead
versions of a row that has a toasted column, those versions may well
reference the same toast value with the same OID. The patch then led to
duplicate-key failures as we tried to insert the toast value twice with the
same OID. (The previous behavior was not very desirable either, since it
would have silently inserted the same value twice with different OIDs.
That wastes space, but what's worse is that the toast values inserted for
already-dead heap rows would not be reclaimed by subsequent ordinary
VACUUMs, since they go into the new toast table marked live not deleted.)
To fix, check if the copied OID already exists in the new toast table, and
if so, assume that it stores the desired value. This is reasonably safe
since the only case where we will copy an OID from a previous toast pointer
is when toast_insert_or_update was given that toast pointer and so we just
pulled the data from the old table; if we got two different values that way
then we have big problems anyway. We do have to assume that no other
backend is inserting items into the new toast table concurrently, but
that's surely safe for CLUSTER and VACUUM FULL.
Per bug #6393 from Maxim Boguk. Back-patch to 9.0, same as the previous
patch.
|
| | |
|
| |
|
|
|
|
|
|
|
|
| |
In the previous coding, a user could queue up for an AccessExclusiveLock
on a table they did not have permission to cluster, thus potentially
interfering with access by authorized users who got stuck waiting behind
the AccessExclusiveLock. This approach avoids that. cluster() has the
same permissions-checking requirements as REINDEX TABLE, so this commit
moves the now-shared callback to tablecmds.c and renames it, per
discussion with Noah Misch.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, renaming a table, sequence, view, index, foreign table,
column, or trigger checked permissions before locking the object, which
meant that if permissions were revoked during the lock wait, we would
still allow the operation. Similarly, if the original object is dropped
and a new one with the same name is created, the operation will be allowed
if we had permissions on the old object; the permissions on the new
object don't matter. All this is now fixed.
Along the way, attempting to rename a trigger on a foreign table now gives
the same error message as trying to create one there in the first place
(i.e. that it's not a table or view) rather than simply stating that no
trigger by that name exists.
Patch by me; review by Noah Misch.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a column pg_class.relallvisible to remember the number of pages that
were all-visible according to the visibility map as of the last VACUUM
(or ANALYZE, or some other operations that update pg_class.relpages).
Use relallvisible/relpages, instead of an arbitrary constant, to estimate
how many heap page fetches can be avoided during an index-only scan.
This is pretty primitive and will no doubt see refinements once we've
acquired more field experience with the index-only scan mechanism, but
it's way better than using a constant.
Note: I had to adjust an underspecified query in the window.sql regression
test, because it was changing answers when the plan changed to use an
index-only scan. Some of the adjacent tests perhaps should be adjusted
as well, but I didn't do that here.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This works around the problem that a catalog cache entry might contain a
toast pointer that we try to dereference just as a VACUUM FULL completes
on that catalog. We will see the sinval message on the cache entry when
we acquire lock on the toast table, but by that point we've already told
tuptoaster.c "here's the pointer to fetch", so it's difficult from a code
structural standpoint to update the pointer before we use it. Much less
painful to ensure that toast pointers are not invalidated in the first
place. We have to add a bit of code to deal with the case that a value
that previously wasn't toasted becomes so; but that should be a
seldom-exercised corner case, so the inefficiency shouldn't be significant.
Back-patch to 9.0. In prior versions, we didn't allow CLUSTER on system
catalogs, and VACUUM FULL didn't result in reassignment of toast OIDs, so
there was no problem.
|
| |
|
|
|
|
|
|
|
| |
Some callers were creating copies of tuple descriptors to pass to that
function, stating in code comments that it was necessary because it
modified the passed descriptor. Code inspection reveals this not to be
true, and indeed not all callers are passing copies in the first place.
So remove the extra ones and the misleading comments about this behavior
as well.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Truncating or dropping a table is treated like deletion of all tuples, and
check for conflicts accordingly. If a table is clustered or rewritten by
ALTER TABLE, all predicate locks on the heap are promoted to relation-level
locks, because the tuple or page ids of any existing tuples will change and
won't be valid after rewriting the table. Arguably ALTER TABLE should be
treated like a mass-UPDATE of every row, but if you e.g change the datatype
of a column, you could also argue that it's just a change to the physical
layout, not a logical change. Reindexing promotes all locks on the index to
relation-level lock on the heap.
Kevin Grittner, with a lot of cosmetic changes by me.
|
| | |
|
| |
|
|
|
|
|
|
| |
We must lock out autovacuuming of the old toast table before computing the
OldestXmin horizon we will use. Otherwise, autovacuum could start on the
toast table later, compute a later OldestXmin horizon, and remove as DEAD
toast tuples that we still need (because we think their parent tuples are
only RECENTLY_DEAD). Per further thought about bug #5998.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Per bug #5988, reported by Marko Tiikkaja, and further analyzed by Tom
Lane, the previous coding was broken in several respects: even if the
target table already existed, a subsequent CREATE TABLE IF NOT EXISTS
might try to add additional constraints or sequences-for-serial
specified in the new CREATE TABLE statement.
In passing, this also fixes a minor information leak: it's no longer
possible to figure out whether a schema to which you don't have CREATE
access contains a sequence named like "x_y_seq" by attempting to create a
table in that schema called "x" with a serial column called "y".
Some more refactoring of this code in the future might be warranted,
but that will need to wait for a later major release.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There can never be a need to push the indcheckxmin horizon forward, since
any HOT chains that are actually broken with respect to the index must
pre-date its original creation. So we can just avoid changing pg_index
altogether during a REINDEX operation.
This offers a cleaner solution than my previous patch for the problem
found a few days ago that we mustn't try to update pg_index while we are
reindexing it. System catalog indexes will always be created with
indcheckxmin = false during initdb, and with this modified code we should
never try to change their pg_index entries. This avoids special-casing
system catalogs as the former patch did, and should provide a performance
benefit for many cases where REINDEX formerly caused an index to be
considered unusable for a short time.
Back-patch to 8.3 to cover all versions containing HOT. Note that this
patch changes the API for index_build(), but I believe it is unlikely that
any add-on code is calling that directly.
|
| |
|
|
|
|
|
| |
For what seem entirely historical reasons, a bitmask "flags" argument was
recently added to reindex_relation without subsuming its existing boolean
argument into that bitmask. This seems a bit bizarre, so fold them
together.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds the server infrastructure to support extensions.
There is still one significant loose end, namely how to make it play nice
with pg_upgrade, so I am not yet committing the changes that would make
all the contrib modules depend on this feature.
In passing, fix a disturbingly large amount of breakage in
AlterObjectNamespace() and callers.
Dimitri Fontaine, reviewed by Anssi Kääriäinen,
Itagaki Takahiro, Tom Lane, and numerous others
|
| |
|
|
|
|
|
|
| |
Failure to do so can lead to constraint violations. This was broken by
commit 1ddc2703a936d03953657f43345460b9242bbed1 on 2010-02-07, so
back-patch to 9.0.
Noah Misch. Regression test by me.
|
| |
|
|
|
|
|
|
|
| |
The only use we have had for amindexnulls is in determining whether an
index is safe to cluster on; but since the addition of the amclusterable
flag, that usage is pretty redundant.
In passing, clean up assorted sloppiness from the last patch that touched
pg_am.h: Natts_pg_am was wrong, and ambuildempty was not documented.
|
