aboutsummaryrefslogtreecommitdiff
path: root/src/backend/nodes/readfuncs.c
Commit message (Collapse)AuthorAge
...
* Clean up representation of function RTEs for functions returning RECORD.Tom Lane2006-03-16
| | | | | | | | | | | | | | | | The original coding stored the raw parser output (ColumnDef and TypeName nodes) which was ugly, bulky, and wrong because it failed to create any dependency on the referenced datatype --- and in fact would not track type renamings and suchlike. Instead store a list of column type OIDs in the RTE. Also fix up general failure of recordDependencyOnExpr to do anything sane about recording dependencies on datatypes. While there are many cases where there will be an indirect dependency (eg if an operator returns a datatype, the dependency on the operator is enough), we do have to record the datatype as a separate dependency in examples like CoerceToDomain. initdb forced because of change of stored rules.
* Improve parser so that we can show an error cursor position for errorsTom Lane2006-03-14
| | | | | | | | | | | during parse analysis, not only errors detected in the flex/bison stages. This is per my earlier proposal. This commit includes all the basic infrastructure, but locations are only tracked and reported for errors involving column references, function calls, and operators. More could be done later but this seems like a good set to start with. I've also moved the ReportSyntaxErrorPosition logic out of psql and into libpq, which should make it available to more people --- even within psql this is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
* Update copyright for 2006. Update scripts.Bruce Momjian2006-03-05
|
* Add TABLESPACE and ON COMMIT clauses to CREATE TABLE AS. ON COMMIT isNeil Conway2006-02-19
| | | | | required by the SQL standard, and TABLESPACE is useful functionality. Patch from Kris Jurka, minor editorialization by Neil Conway.
* Implement SQL-compliant treatment of row comparisons for < <= > >= casesTom Lane2005-12-28
| | | | | | | | | | | | | | | | (previously we only did = and <> correctly). Also, allow row comparisons with any operators that are in btree opclasses, not only those with these specific names. This gets rid of a whole lot of indefensible assumptions about the behavior of particular operators based on their names ... though it's still true that IN and NOT IN expand to "= ANY". The patch adds a RowCompareExpr expression node type, and makes some changes in the representation of ANY/ALL/ROWCOMPARE SubLinks so that they can share code with RowCompareExpr. I have not yet done anything about making RowCompareExpr an indexable operator, but will look at that soon. initdb forced due to changes in stored rules.
* Standard pgindent run for 8.1.Bruce Momjian2005-10-15
|
* Add NOWAIT option to SELECT FOR UPDATE/SHARE.Tom Lane2005-08-01
| | | | | Original patch by Hans-Juergen Schoenig, revisions by Karel Zak and Tom Lane.
* Replace pg_shadow and pg_group by new role-capable catalogs pg_authidTom Lane2005-06-28
| | | | | | | | and pg_auth_members. There are still many loose ends to finish in this patch (no documentation, no regression tests, no pg_dump support for instance). But I'm going to commit it now anyway so that Alvaro can make some progress on shared dependencies. The catalog changes should be pretty much done.
* Add Oracle-compatible GREATEST and LEAST functions. Pavel StehuleTom Lane2005-06-26
|
* Remove planner's private fields from Query struct, and put them intoTom Lane2005-06-05
| | | | | | | | a new PlannerInfo struct, which is passed around instead of the bare Query in all the planning code. This commit is essentially just a code-beautification exercise, but it does open the door to making larger changes to the planner data structures without having to muck with the widely-known Query struct.
* Implement sharable row-level locks, and use them for foreign key referencesTom Lane2005-04-28
| | | | | | | | | | | | | | | to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU data structure (managed much like pg_subtrans) to represent multiple- transaction-ID sets. When more than one transaction is holding a shared lock on a particular row, we create a MultiXactId representing that set of transactions and store its ID in the row's XMAX. This scheme allows an effectively unlimited number of row locks, just as we did before, while not costing any extra overhead except when a shared lock actually has to be shared. Still TODO: use the regular lock manager to control the grant order when multiple backends are waiting for a row lock. Alvaro Herrera and Tom Lane.
* Merge Resdom nodes into TargetEntry nodes to simplify code and save aTom Lane2005-04-06
| | | | | | | | | few palloc's. I also chose to eliminate the restype and restypmod fields entirely, since they are redundant with information stored in the node's contained expression; re-examining the expression at need seems simpler and more reliable than trying to keep restype/restypmod up to date. initdb forced due to change in contents of stored rules.
* Tag appropriate files for rc3PostgreSQL Daemon2004-12-31
| | | | | | | | Also performed an initial run through of upgrading our Copyright date to extend to 2005 ... first run here was very simple ... change everything where: grep 1996-2004 && the word 'Copyright' ... scanned through the generated list with 'less' first, and after, to make sure that I only picked up the right entries ...
* Instead of supposing (wrongly, in the general case) that the rowtypeTom Lane2004-12-11
| | | | | | | | of an inheritance child table is binary-compatible with the rowtype of its parent, invent an expression node type that does the conversion correctly. Fixes the new bug exhibited by Kris Shannon as well as a lot of old bugs that would only show up when using multiple inheritance or after altering the parent table.
* Update copyright to 2004.Bruce Momjian2004-08-29
|
* Support assignment to subfields of composite columns in UPDATE and INSERT.Tom Lane2004-06-09
| | | | | | | | As a side effect, cause subscripts in INSERT targetlists to do something more or less sensible; previously we evaluated such subscripts and then effectively ignored them. Another side effect is that UPDATE-ing an element or slice of an array value that is NULL now produces a non-null result, namely an array containing just the assigned-to positions.
* Use the new List API function names throughout the backend, and disable theNeil Conway2004-05-30
| | | | | list compatibility API by default. While doing this, I decided to keep the llast() macro around and introduce llast_int() and llast_oid() variants.
* Reimplement the linked list data structure used throughout the backend.Neil Conway2004-05-26
| | | | | | | | | | | | | | | | In the past, we used a 'Lispy' linked list implementation: a "list" was merely a pointer to the head node of the list. The problem with that design is that it makes lappend() and length() linear time. This patch fixes that problem (and others) by maintaining a count of the list length and a pointer to the tail node along with each head node pointer. A "list" is now a pointer to a structure containing some meta-data about the list; the head and tail pointers in that structure refer to ListCell structures that maintain the actual linked list of nodes. The function names of the list API have also been changed to, I hope, be more logically consistent. By default, the old function names are still available; they will be disabled-by-default once the rest of the tree has been updated to use the new API names.
* Promote row expressions to full-fledged citizens of the expression syntax,Tom Lane2004-05-10
| | | | | | | | | | rather than allowing them only in a few special cases as before. In particular you can now pass a ROW() construct to a function that accepts a rowtype parameter. Internal generation of RowExprs fixes a number of corner cases that used to not work very well, such as referencing the whole-row result of a JOIN or subquery. This represents a further step in the work I started a month or so back to make rowtype values into first-class citizens.
* Alter string format used for integer and OID lists in stored rules.Tom Lane2004-05-08
| | | | | | | | This simplifies and speeds up the reader by letting it get the representation right the first time, rather than correcting it after-the-fact. Also, after int and OID lists become separate node types per Neil's pending patch, this will let us treat these lists as just plain Nodes instead of requiring separate read/write macros the way we have now.
* Rewrite nodeRead() in a less obfuscated fashion, per discussion withTom Lane2004-05-06
| | | | Neil Conway.
* Reimplement CASE val WHEN compval1 THEN ... WHEN compval2 THEN ... ENDTom Lane2004-03-17
| | | | | | | | so that the 'val' is computed only once, per recent discussion. The speedup is not much when 'val' is just a simple variable, but could be significant for larger expressions. More importantly this avoids issues with multiple evaluations of a volatile 'val', and it allows the CASE expression to be reverse-listed in its original form by ruleutils.c.
* Fix permission-checking bug reported by Tim Burgess 10-Feb-03 (this timeTom Lane2004-01-14
| | | | | | | | | for sure...). Rather than relying on the query context of a rangetable entry to identify what permissions it wants checked, store a full AclMode mask in each RTE, and check exactly those bits. This allows an RTE specifying, say, INSERT privilege on a view to be copied into a derived UPDATE query without changing meaning. Per recent discussion thread. initdb forced due to change of stored rule representation.
* More janitorial work: remove the explicit casting of NULL literals to aNeil Conway2004-01-07
| | | | | | | | pointer type when it is not necessary to do so. For future reference, casting NULL to a pointer type is only necessary when (a) invoking a function AND either (b) the function has no prototype OR (c) the function is a varargs function.
* $Header: -> $PostgreSQL Changes ...PostgreSQL Daemon2003-11-29
|
* Fix ARRAY[] construct so that in multidimensional case, elements canTom Lane2003-08-17
| | | | | | | | be anything yielding an array of the proper kind, not only sub-ARRAY[] constructs; do subscript checking at runtime not parse time. Also, adjust array_cat to make array || array comply with the SQL99 spec. Joe Conway
* Update copyrights to 2003.Bruce Momjian2003-08-04
|
* pgindent run.Bruce Momjian2003-08-04
|
* Error message editing in backend/bootstrap, /lib, /nodes, /port.Tom Lane2003-07-22
|
* Code review for UPDATE tab SET col = DEFAULT patch ... whack it aroundTom Lane2003-07-03
| | | | so it has some chance of working in rules ...
* Support expressions of the form 'scalar op ANY (array)' andTom Lane2003-06-29
| | | | | | | | | | 'scalar op ALL (array)', where the operator is applied between the lefthand scalar and each element of the array. The operator must yield boolean; the result of the construct is the OR or AND of the per-element results, respectively. Original coding by Joe Conway, after an idea of Peter's. Rewritten by Tom to keep the implementation strictly separate from subqueries.
* Back out array mega-patch.Bruce Momjian2003-06-25
| | | | Joe Conway
* Array mega-patch.Bruce Momjian2003-06-24
| | | | Joe Conway
* Implement outer-level aggregates to conform to the SQL spec, withTom Lane2003-06-06
| | | | | | | | extensions to support our historical behavior. An aggregate belongs to the closest query level of any of the variables in its argument, or the current query level if there are no variables (e.g., COUNT(*)). The implementation involves adding an agglevelsup field to Aggref, and treating outer aggregates like outer variables at planning time.
* Implement feature of new FE/BE protocol whereby RowDescription identifiesTom Lane2003-05-06
| | | | | | | | | the column by table OID and column number, if it's a simple column reference. Along the way, get rid of reskey/reskeyop fields in Resdoms. Turns out that representation was not convenient for either the planner or the executor; we can make the planner deliver exactly what the executor wants with no more effort. initdb forced due to change in stored rule representation.
* Portal and memory management infrastructure for extended query protocol.Tom Lane2003-05-02
| | | | | | | | | Both plannable queries and utility commands are now always executed within Portals, which have been revamped so that they can handle the load (they used to be good only for single SELECT queries). Restructure code to push command-completion-tag selection logic out of postgres.c, so that it won't have to be duplicated between simple and extended queries. initdb forced due to addition of a field to Query nodes.
* First phase of work on array improvements. ARRAY[x,y,z] constructorTom Lane2003-04-08
| | | | | | | expressions, ARRAY(sub-SELECT) expressions, some array functions. Polymorphic functions using ANYARRAY/ANYELEMENT argument and return types. Some regression tests in place, documentation is lacking. Joe Conway, with some kibitzing from Tom Lane.
* Restructure parsetree representation of DECLARE CURSOR: now it's aTom Lane2003-03-10
| | | | | | | | | | | | utility statement (DeclareCursorStmt) with a SELECT query dangling from it, rather than a SELECT query with a few unusual fields in it. Add code to determine whether a planned query can safely be run backwards. If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run backwards by adding a Materialize plan node if it can't. Without SCROLL, you get an error if you try to fetch backwards from a cursor that can't handle it. (There is still some discussion about what the exact behavior should be, but this is necessary infrastructure in any case.) Along the way, make EXPLAIN DECLARE CURSOR work.
* COALESCE() and NULLIF() are now first-class expressions, not macrosTom Lane2003-02-16
| | | | | that turn into CASE expressions. They evaluate their arguments at most once. Patch by Kris Jurka, review and (very light) editorializing by me.
* Create a distinction between Lists of integers and Lists of OIDs, to getTom Lane2003-02-09
| | | | | | rid of the assumption that sizeof(Oid)==sizeof(int). This is one small step towards someday supporting 8-byte OIDs. For the moment, it doesn't do much except get rid of a lot of unsightly casts.
* Determine the set of constraints applied to a domain at executorTom Lane2003-02-03
| | | | | | startup, not in the parser; this allows ALTER DOMAIN to work correctly with domain constraint operations stored in rules. Rod Taylor; code review by Tom Lane.
* Further tweaking of parsetree & plantree representation of SubLinks.Tom Lane2003-01-10
| | | | | | | Simplify SubLink by storing just a List of operator OIDs, instead of a list of incomplete OpExprs --- that was a bizarre and bulky choice, with no redeeming social value since we have to build new OpExprs anyway when forming the plan tree.
* Adjust parser so that 'x NOT IN (subselect)' is converted toTom Lane2003-01-09
| | | | | | | | | | | 'NOT (x IN (subselect))', that is 'NOT (x = ANY (subselect))', rather than 'x <> ALL (subselect)' as we formerly did. This opens the door to optimizing NOT IN the same way as IN, whereas there's no hope of optimizing the expression using <>. Also, convert 'x <> ALL (subselect)' to the NOT(IN) style, so that the optimization will be available when processing rules dumped by older Postgres versions. initdb forced due to small change in SubLink node representation.
* Clean up plantree representation of SubPlan-s --- SubLink does not appearTom Lane2002-12-14
| | | | | | | | in the planned representation of a subplan at all any more, only SubPlan. This means subselect.c doesn't scribble on its input anymore, which seems like a good thing; and there are no longer three different possible interpretations of a SubLink. Simplify node naming and improve comments in primnodes.h. No change to stored rules, though.
* Phase 3 of read-only-plans project: ExecInitExpr now builds expressionTom Lane2002-12-13
| | | | | | | execution state trees, and ExecEvalExpr takes an expression state tree not an expression plan tree. The plan tree is now read-only as far as the executor is concerned. Next step is to begin actually exploiting this property.
* Preliminary code review for domain CHECK constraints patch: add documentation,Tom Lane2002-12-12
| | | | | | | | make VALUE a non-reserved word again, use less invasive method of passing ConstraintTestValue into transformExpr, fix problems with nested constraint testing, do correct thing with NULL result from a constraint expression, remove memory leak. Domain checks still need much more work if we are going to allow ALTER DOMAIN, however.
* Phase 2 of read-only-plans project: restructure expression-tree nodesTom Lane2002-12-12
| | | | | | | | | so that all executable expression nodes inherit from a common supertype Expr. This is somewhat of an exercise in code purity rather than any real functional advance, but getting rid of the extra Oper or Func node formerly used in each operator or function call should provide at least a little space and speed improvement. initdb forced by changes in stored-rules representation.
* Remove unused constisset and constiscast fields of Const nodes. CleanTom Lane2002-11-25
| | | | up code and documentation associated with Param nodes.
* Restructure outfuncs and readfuncs to use macros in the same style asTom Lane2002-11-25
| | | | | | | | just done for copyfuncs/equalfuncs. Read functions in particular get a lot shorter than before, and it's much easier to compare an out function with the corresponding read function to make sure they agree. initdb forced due to small changes in nodestring format (regularizing a few cases that were formerly idiosyncratic).
* Restructure planning of nestloop inner indexscans so that the set of usableTom Lane2002-11-24
| | | | | | | | | | | joinclauses is determined accurately for each join. Formerly, the code only considered joinclauses that used all of the rels from the outer side of the join; thus for example FROM (a CROSS JOIN b) JOIN c ON (c.f1 = a.x AND c.f2 = b.y) could not exploit a two-column index on c(f1,f2), since neither of the qual clauses would be in the joininfo list it looked in. The new code does this correctly, and also is able to eliminate redundant clauses, thus fixing the problem noted 24-Oct-02 by Hans-Jürgen Schönig.
generated by cgit v1.2.3 (git 2.25.1) at 2025-06-27 04:00:28 +0000