| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The init_ps_display() arguments were mostly lies by now, so to match
typical usage, just use one argument and let the caller assemble it
from multiple sources if necessary. The only user of the additional
arguments is BackendInitialize(), which was already doing string
assembly on the caller side anyway.
Remove the second argument of set_ps_display() ("force") and just
handle that in init_ps_display() internally.
BackendInitialize() also used to set the initial status as
"authentication", but that was very far from where authentication
actually happened. So now it's set to "initializing" and then
"authentication" just before the actual call to
ClientAuthentication().
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds pg_stat_progress_basebackup view that reports
the progress while an application like pg_basebackup is taking
a base backup. This uses the progress reporting infrastructure
added by c16dc1aca5e0, adding support for streaming base backup.
Bump catversion.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Amit Langote, Sergei Kornilov
Discussion: https://postgr.es/m/9ed8b801-8215-1f3d-62d7-65bff53f6e94@oss.nttdata.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
An instance of PostgreSQL crashing with a bad timing could leave behind
temporary pg_internal.init files, potentially causing failures when
verifying checksums. As the same exclusion lists are used between
pg_rewind, pg_checksums and basebackup.c, all those tools are extended
with prefix checks to keep everything in sync, with dedicated checks
added for pg_internal.init.
Backpatch down to 11, where pg_checksums (pg_verify_checksums in 11) and
checksum verification for base backups have been introduced.
Reported-by: Michael Banck
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/62031974fd8e941dd8351fbc8c7eff60d59c5338.camel@credativ.de
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
| |
The use of pg_atoi() for parsing a string into an Oid fails for values
larger than INT32_MAX, since OIDs are unsigned. Instead, use
atooid(). While this has less error checking, the contents of the
data directory are expected to be trustworthy, so we don't need to go
out of our way to do full error checking.
Discussion: https://www.postgresql.org/message-id/flat/dea47fc8-6c89-a2b1-07e3-754ff1ab094b%402ndquadrant.com
|
| |
|
|
| |
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous coding imagined that it could call before_shmem_exit()
when a non-exclusive backup began and then remove the previously-added
handler by calling cancel_before_shmem_exit() when that backup
ended. However, this only works provided that nothing else in the
system has registered a before_shmem_exit() hook in the interim,
because cancel_before_shmem_exit() is documented to remove a callback
only if it is the latest callback registered. It also only works
if nothing can ERROR out between the time that sessionBackupState
is reset and the time that cancel_before_shmem_exit(), which doesn't
seem to be strictly true.
To fix, leave the handler installed for the lifetime of the session,
arrange to install it just once, and teach it to quietly do nothing if
there isn't a non-exclusive backup in process.
This is a bug, but for now I'm not going to back-patch, because the
consequences are minor. It's possible to cause a spurious warning
to be generated, but that doesn't really matter. It's also possible
to trigger an assertion failure, but production builds shouldn't
have assertions enabled.
Patch by me, reviewed by Kyotaro Horiguchi, Michael Paquier (who
preferred a different approach, but got outvoted), Fujii Masao,
and Tom Lane, and with comments by various others.
Discussion: http://postgr.es/m/CA+TgmobMjnyBfNhGTKQEDbqXYE3_rXWpc4CM63fhyerNCes3mA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
| |
Similar to commits 7e735035f2 and dddf4cdc33, this commit makes the order
of header file inclusion consistent for backend modules.
In the passing, removed a couple of duplicate inclusions.
Author: Vignesh C
Reviewed-by: Kuntal Ghosh and Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
|
| | |
|
| |
|
|
|
| |
Author: Mark G <markg735@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAEeOP_YFVeFjq4zDZLDQbLSRFxBiTpwBQHxCNgGd%2Bp5VztTXyQ%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The old code didn't differentiate between a read error and a
concurrent truncation. fread reports both of these by returning 0;
you have to use feof() or ferror() to distinguish between them,
which this code did not do.
It might be a better idea to use read() rather than fread() here,
so that we can display a less-generic error message, but I'm not
sure that would qualify as a back-patchable bug fix, so just do
this much for now.
Jeevan Chalke, reviewed by Jeevan Ladhe and by me.
Discussion: http://postgr.es/m/CA+TgmobG4ywMzL5oQq2a8YKp8x2p3p1LOMMcGqpS7aekT9+ETA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
| |
This addresses some issues with unnecessary code comments, fixes various
typos in docs and comments, and removes some orphaned structures and
definitions.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/9aabc775-5494-b372-8bcb-4dfc0bd37c68@gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the wake of commit 1cff1b95a, the obvious way to sort a List
is to apply qsort() directly to the array of ListCells. list_qsort
was building an intermediate array of pointers-to-ListCells, which
we no longer need, but getting rid of it forces an API change:
the comparator functions need to do one less level of indirection.
Since we're having to touch the callers anyway, let's do two additional
changes: sort the given list in-place rather than making a copy (as
none of the existing callers have any use for the copying behavior),
and rename list_qsort to list_sort. It was argued that the old name
exposes more about the implementation than it should, which I find
pretty questionable, but a better reason to rename it is to be sure
we get the attention of any external callers about the need to fix
their comparator functions.
While we're at it, change four existing callers of qsort() to use
list_sort instead; previously, they all had local reinventions
of list_qsort, ie build-an-array-from-a-List-and-qsort-it.
(There are some other places where changing to list_sort perhaps
would be worthwhile, but they're less obviously wins.)
Discussion: https://postgr.es/m/29361.1563220190@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Originally, Postgres Lists were a more or less exact reimplementation of
Lisp lists, which consist of chains of separately-allocated cons cells,
each having a value and a next-cell link. We'd hacked that once before
(commit d0b4399d8) to add a separate List header, but the data was still
in cons cells. That makes some operations -- notably list_nth() -- O(N),
and it's bulky because of the next-cell pointers and per-cell palloc
overhead, and it's very cache-unfriendly if the cons cells end up
scattered around rather than being adjacent.
In this rewrite, we still have List headers, but the data is in a
resizable array of values, with no next-cell links. Now we need at
most two palloc's per List, and often only one, since we can allocate
some values in the same palloc call as the List header. (Of course,
extending an existing List may require repalloc's to enlarge the array.
But this involves just O(log N) allocations not O(N).)
Of course this is not without downsides. The key difficulty is that
addition or deletion of a list entry may now cause other entries to
move, which it did not before.
For example, that breaks foreach() and sister macros, which historically
used a pointer to the current cons-cell as loop state. We can repair
those macros transparently by making their actual loop state be an
integer list index; the exposed "ListCell *" pointer is no longer state
carried across loop iterations, but is just a derived value. (In
practice, modern compilers can optimize things back to having just one
loop state value, at least for simple cases with inline loop bodies.)
In principle, this is a semantics change for cases where the loop body
inserts or deletes list entries ahead of the current loop index; but
I found no such cases in the Postgres code.
The change is not at all transparent for code that doesn't use foreach()
but chases lists "by hand" using lnext(). The largest share of such
code in the backend is in loops that were maintaining "prev" and "next"
variables in addition to the current-cell pointer, in order to delete
list cells efficiently using list_delete_cell(). However, we no longer
need a previous-cell pointer to delete a list cell efficiently. Keeping
a next-cell pointer doesn't work, as explained above, but we can improve
matters by changing such code to use a regular foreach() loop and then
using the new macro foreach_delete_current() to delete the current cell.
(This macro knows how to update the associated foreach loop's state so
that no cells will be missed in the traversal.)
There remains a nontrivial risk of code assuming that a ListCell *
pointer will remain good over an operation that could now move the list
contents. To help catch such errors, list.c can be compiled with a new
define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents
whenever that could possibly happen. This makes list operations
significantly more expensive so it's not normally turned on (though it
is on by default if USE_VALGRIND is on).
There are two notable API differences from the previous code:
* lnext() now requires the List's header pointer in addition to the
current cell's address.
* list_delete_cell() no longer requires a previous-cell argument.
These changes are somewhat unfortunate, but on the other hand code using
either function needs inspection to see if it is assuming anything
it shouldn't, so it's not all bad.
Programmers should be aware of these significant performance changes:
* list_nth() and related functions are now O(1); so there's no
major access-speed difference between a list and an array.
* Inserting or deleting a list element now takes time proportional to
the distance to the end of the list, due to moving the array elements.
(However, it typically *doesn't* require palloc or pfree, so except in
long lists it's probably still faster than before.) Notably, lcons()
used to be about the same cost as lappend(), but that's no longer true
if the list is long. Code that uses lcons() and list_delete_first()
to maintain a stack might usefully be rewritten to push and pop at the
end of the list rather than the beginning.
* There are now list_insert_nth...() and list_delete_nth...() functions
that add or remove a list cell identified by index. These have the
data-movement penalty explained above, but there's no search penalty.
* list_concat() and variants now copy the second list's data into
storage belonging to the first list, so there is no longer any
sharing of cells between the input lists. The second argument is
now declared "const List *" to reflect that it isn't changed.
This patch just does the minimum needed to get the new implementation
in place and fix bugs exposed by the regression tests. As suggested
by the foregoing, there's a fair amount of followup work remaining to
do.
Also, the ENABLE_LIST_COMPAT macros are finally removed in this
commit. Code using those should have been gone a dozen years ago.
Patch by me; thanks to David Rowley, Jesper Pedersen, and others
for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
| |
This addresses a couple of issues in the code:
- Typos and inconsistencies in comments and function declarations.
- Removal of unreferenced function declarations.
- Removal of unnecessary compile flags.
- A cleanup error in regressplans.sh.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/0c991fdf-2670-1997-c027-772a420c4604@gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Because there is no portable int64/uint64 format specifier and we
can't stick macros like INT64_FORMAT into the middle of a translatable
string, we have been using various workarounds that put the number to
be printed into a string buffer first. Now that we always use our own
sprintf(), we can rely on %lld and %llu to work, so we can use those.
This patch undoes this workaround in a few places where it was
egregiously verbose.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/CAH2-Wz%3DWbNxc5ob5NJ9yqo2RMJ0q4HXDS30GVCobeCvC9A1L9A%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
| |
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This adds a row to the pg_stat_database view with datoid 0 and datname
NULL for those objects that are not in a database. This was added
particularly for checksums, but we were already tracking more satistics
for these objects, just not returning it.
Also add a checksum_last_failure column that holds the timestamptz of
the last checksum failure that occurred in a database (or in a
non-dataabase file), if any.
Author: Julien Rouhaud <rjuju123@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
The current tool name is too restrictive and focuses only on verifying
checksums. As more options to control checksums for an offline cluster
are planned to be added, switch to a more generic name. Documentation
as well as all past references to the tool are updated.
Author: Michael Paquier
Reviewed-by: Michael Banck, Fabien Coelho, Seigei Kornilov
Discussion: https://postgr.es/m/20181221201616.GD4974@nighthawk.caipicrew.dd-dns.de
|
| |
|
|
|
|
|
|
|
|
| |
This adds a column that counts how many checksum failures have occurred
on files belonging to a specific database. Both checksum failures
during normal backend processing and those created when a base backup
detects a checksum failure are counted.
Author: Magnus Hagander
Reviewed by: Julien Rouhaud
|
| |
|
|
| |
Backpatch-through: certain files through 9.4
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Three issues are fixed in this patch:
- Base backups forgot to ignore files specific to EXEC_BACKEND, leading
to spurious warnings when checksums are enabled, per analysis from me.
- pg_verify_checksums forgot about files specific to EXEC_BACKEND,
leading to failures of the tool on any such build, particularly Windows.
This error was originally found by newly-introduced TAP tests in various
buildfarm members using EXEC_BACKEND.
- pg_verify_checksums forgot to count for temporary files and temporary
paths, which could be valid relation files, without checksums, per
report from Andres Freund. More tests are added to cover this case.
A new test case which emulates corruption for a file in a different
tablespace is added, coming from from Michael Banck, while I have coded
the main code and refactored the test code.
Author: Michael Banck, Michael Paquier
Reviewed-by: Stephen Frost, David Steele
Discussion: https://postgr.es/m/20181021134206.GA14282@paquier.xyz
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Users of the WaitEventSet and WaitLatch() APIs can now choose between
asking for WL_POSTMASTER_DEATH and then handling it explicitly, or asking
for WL_EXIT_ON_PM_DEATH to trigger immediate exit on postmaster death.
This reduces code duplication, since almost all callers want the latter.
Repair all code that was previously ignoring postmaster death completely,
or requesting the event but ignoring it, or requesting the event but then
doing an unconditional PostmasterIsAlive() call every time through its
event loop (which is an expensive syscall on platforms for which we don't
have USE_POSTMASTER_DEATH_SIGNAL support).
Assert that callers of WaitLatchXXX() under the postmaster remember to
ask for either WL_POSTMASTER_DEATH or WL_EXIT_ON_PM_DEATH, to prevent
future bugs.
The only process that doesn't handle postmaster death is syslogger. It
waits until all backends holding the write end of the syslog pipe
(including the postmaster) have closed it by exiting, to be sure to
capture any parting messages. By using the WaitEventSet API directly
it avoids the new assertion, and as a by-product it may be slightly
more efficient on platforms that have epoll().
Author: Thomas Munro
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas, Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D1TCviRykkUb69ppWLr_V697rzd1j3eZsRMmbXvETfqbQ%40mail.gmail.com,
https://postgr.es/m/CAEepm=2LqHzizbe7muD7-2yHUbTOoF7Q+qkSD5Q41kuhttRTwA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This allows the compiler / linker to mark affected pages as read-only.
There's other cases, but they're a bit more invasive, and should go
through some review. These are easy.
They were found with
objdump -j .data -t src/backend/postgres|awk '{print $4, $5, $6}'|sort -r|less
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This makes a bit less work for translators, by unifying error strings a
bit more with what the rest of the code does, this time for three error
strings in autoprewarm and one in base backup code.
After some code review of slot.c, some file-access errcodes are reported
but lead to an incorrect internal error, while corrupted data makes the
most sense, similarly to the previous work done in e41d0a1. Also,
after calling rmtree(), a WARNING gets reported, which is a duplicate of
what the internal call report, so make the code more consistent with all
other code paths calling this function.
Author: Michael Paquier
Discussion: https://postgr.es/m/20180902200747.GC1343@paquier.xyz
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
System calls mixed up in error code paths are causing two issues which
several code paths have not correctly handled:
1) For write() calls, sometimes the system may return less bytes than
what has been written without errno being set. Some paths were careful
enough to consider that case, and assumed that errno should be set to
ENOSPC, other calls missed that.
2) errno generated by a system call is overwritten by other system calls
which may succeed once an error code path is taken, causing what is
reported to the user to be incorrect.
This patch uses the brute-force approach of correcting all those code
paths. Some refactoring could happen in the future, but this is let as
future work, which is not targeted for back-branches anyway.
Author: Michael Paquier
Reviewed-by: Ashutosh Sharma
Discussion: https://postgr.es/m/20180622061535.GD5215@paquier.xyz
|
| |
|
|
|
|
|
|
|
|
| |
Don't overflow the result type of constant expressions. Don't negate
unsigned types. Define HAVE_STDBOOL_H for Visual C++ 2013 and later.
Thomas Munro
Reviewed-By: Michael Paquier and Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D3%3DTDYEXUEcHpEx%2BTwc31wo7PA0oBAiNt6sWmq93MW02A%40mail.gmail.com
|
| |
|
|
| |
Discussion: https://postgr.es/m/15719.1523984266@sss.pgh.pa.us
|
| |
|
|
|
|
|
| |
Teach both base backups and pg_verify_checksums that if a page is new,
it does not have a checksum yet, so it shouldn't be verified.
Noted by Tomas Vondra, review by David Steele.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit 9c0a0de4c, I'd failed to notice that catalog/catalog.h
should also be considered a frontend-unsafe header, because it includes
(and needs) the full form of pg_class.h, not to mention relcache.h.
However, various frontend code was depending on it to get
TABLESPACE_VERSION_DIRECTORY, so refactoring of some sort is called for.
The cleanest answer seems to be to move TABLESPACE_VERSION_DIRECTORY,
as well as the OIDCHARS symbol, to common/relpath.h. Do that, and mop up
inclusions as necessary. (I found that quite a few current users of
catalog/catalog.h don't seem to need it at all anymore, apparently as a
result of the refactorings that created common/relpath.[hc]. And
initdb.c needed it only as a route to pg_class_d.h.)
Discussion: https://postgr.es/m/6629.1523294509@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
| |
This reverts the backend sides of commit 1fde38beaa0c3e66c340efc7cc0dc272d6254bb0.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
|
| |
|
|
| |
Per buildfarm animal prairiedog, suggestion solution from Tom.
|
| |
|
|
|
|
|
| |
Reorder the check for non-BLCKSZ size reads to make sure we don't abort
sending the file in this case.
Missed in the previous commit.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When base backups are run over the replication protocol (for example
using pg_basebackup), verify the checksums of all data blocks if
checksums are enabled. If checksum failures are encountered, log them
as warnings but don't abort the backup.
This becomes the default behaviour in pg_basebackup (provided checksums
are enabled on the server), so add a switch (-k) to disable the checks
if necessary.
Author: Michael Banck
Reviewed-By: Magnus Hagander, David Steele
Discussion: https://postgr.es/m/20180228180856.GE13784@nighthawk.caipicrew.dd-dns.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The target cluster that was rewound needs to perform recovery from
the checkpoint created at failover, which leads it to remove or recreate
some files and directories that may have been copied from the source
cluster. So pg_rewind can skip synchronizing such files and directories,
and which reduces the amount of data transferred during a rewind
without changing the usefulness of the operation.
Author: Michael Paquier
Reviewed-by: Anastasia Lubennikova, Stephen Frost and me
Discussion: https://postgr.es/m/20180205071022.GA17337@paquier.xyz
|
| |
|
|
|
|
|
|
|
| |
Do not store temp tables in basebackup, they will not be visible anyway, so,
there are not reasons to store them.
Author: David Steel
Reviewed by: me
Discussion: https://www.postgresql.org/message-id/flat/5ea4d26a-a453-c1b7-eff9-5a3ef8f8aceb@pgmasters.net
|
| |
|
|
|
|
|
|
|
| |
Commit 8694cc96b did this randomly differently from other callers of
parse_filename_for_nontemp_relation(). Perhaps unsurprisingly,
the randomly different way is wrong; it fails to ensure the
extracted string is null-terminated. Per buildfarm member skink.
Discussion: https://postgr.es/m/14453.1522001792@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
| |
Exclude unlogged tables from base backup entirely except init fork which marks
created unlogged table. The next question is do not backup temp table but
it's a story for separate patch.
Author: David Steele
Review by: Adam Brightwell, Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/flat/04791bab-cb04-ba43-e9c0-664a4c1ffb2c@pgmasters.net
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Other header files should never #include postgres.h (nor postgres_fe.h,
nor c.h), per project policy. Also, there's no need for any backend .c
file to explicitly include elog.h or palloc.h, because postgres.h pulls
those in already.
Extracted from a larger patch by Kyotaro Horiguchi. The rest of the
removals he suggests require more study, but these are no-brainers.
Discussion: https://postgr.es/m/20180215.200447.209320006.horiguchi.kyotaro@lab.ntt.co.jp
|
| |
|
|
| |
Backpatch-through: certain files through 9.3
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously an assertion failure occurred when pg_stop_backup() for
non-exclusive backup was aborted while it's waiting for WAL files to
be archived. This assertion failure happened in do_pg_abort_backup()
which was called when a non-exclusive backup was canceled.
do_pg_abort_backup() assumes that there is at least one non-exclusive
backup running when it's called. But pg_stop_backup() can be canceled
even after it marks the end of non-exclusive backup (e.g.,
during waiting for WAL archiving). This broke the assumption that
do_pg_abort_backup() relies on, and which caused an assertion failure.
This commit changes do_pg_abort_backup() so that it does nothing
when non-exclusive backup has been already marked as completed.
That is, the asssumption is also changed, and do_pg_abort_backup()
now can handle even the case where it's called when there is
no running backup.
Backpatch to 9.6 where SQL-callable non-exclusive backup was added.
Author: Masahiko Sawada and Michael Paquier
Reviewed-By: Robert Haas and Fujii Masao
Discussion: https://www.postgresql.org/message-id/CAD21AoD2L1Fu2c==gnVASMyFAAaq3y-AQ2uEVj-zTCGFFjvmDg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
do_pg_start_backup() expects its callers to pass in an open DIR pointer
for the pg_tblspc directory, but there's no apparent advantage in that.
It complicates the callers without adding any flexibility, and there's no
robustness advantage, since we surely have to be prepared for errors during
the scan of pg_tblspc anyway. In fact, by holding an extra kernel resource
during operations like the preliminary checkpoint, we might be making
things a fraction more failure-prone not less. Hence, remove that argument
and open the directory just for the duration of the actual scan.
Discussion: https://postgr.es/m/28752.1512413887@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fixes a couple of low-probability bugs that could lead to
reporting an irrelevant errno value (and hence possibly a wrong SQLSTATE)
concerning directory-open or file-open failures. It also fixes places
where we took shortcuts in reporting such errors, either by using elog
instead of ereport or by using ereport but forgetting to specify an
errcode. And it eliminates a lot of just plain redundant error-handling
code.
In service of all this, export fd.c's formerly-static function
ReadDirExtended, so that external callers can make use of the coding
pattern
dir = AllocateDir(path);
while ((de = ReadDirExtended(dir, path, LOG)) != NULL)
if they'd like to treat directory-open failures as mere LOG conditions
rather than errors. Also fix FreeDir to be a no-op if we reach it
with dir == NULL, as such a coding pattern would cause.
Then, remove code at many call sites that was throwing an error or log
message for AllocateDir failure, as ReadDir or ReadDirExtended can handle
that job just fine. Aside from being a net code savings, this gets rid of
a lot of not-quite-up-to-snuff reports, as mentioned above. (In some
places these changes result in replacing a custom error message such as
"could not open tablespace directory" with more generic wording "could not
open directory", but it was agreed that the custom wording buys little as
long as we report the directory name.) In some other call sites where we
can't just remove code, change the error reports to be fully
project-style-compliant.
Also reorder code in restoreTwoPhaseData that was acquiring a lock
between AllocateDir and ReadDir; in the unlikely but surely not
impossible case that LWLockAcquire changes errno, AllocateDir failures
would be misreported. There is no great value in opening the directory
before acquiring TwoPhaseStateLock, so just do it in the other order.
Also fix CheckXLogRemoved to guarantee that it preserves errno,
as quite a number of call sites are implicitly assuming. (Again,
it's unlikely but I think not impossible that errno could change
during a SpinLockAcquire. If so, this function was broken for its
own purposes as well as breaking callers.)
And change a few places that were using not-per-project-style messages,
such as "could not read directory" when "could not open directory" is
more correct.
Back-patch the exporting of ReadDirExtended, in case we have occasion
to back-patch some fix that makes use of it; it's not needed right now
but surely making it global is pretty harmless. Also back-patch the
restoreTwoPhaseData and CheckXLogRemoved fixes. The rest of this is
essentially cosmetic and need not get back-patched.
Michael Paquier, with a bit of additional work by me
Discussion: https://postgr.es/m/CAB7nPqRpOCxjiirHmebEFhXVTK7V5Jvw4bz82p7Oimtsm3TyZA@mail.gmail.com
|
| |
|
|
| |
Discussion: http://postgr.es/m/CA+TgmoaA9=1RWKtBWpDaj+sF3Stgc8sHgf5z=KGtbjwPLQVDMA@mail.gmail.com
|
| |
|
|
| |
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
|
| |
|
|
|
|
|
| |
Add docs to explain this for other backup mechanisms
Author: David Steele <david@pgmasters.net>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndQuadrant.com> et al
|
| |
|
|
|
|
|
| |
pq_sendint() remains, so extension code doesn't unnecessarily break.
Author: Andres Freund
Discussion: https://postgr.es/m/20170914063418.sckdzgjfrsbekae4@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Throttling for sending a base backup in walsender is broken for the case
where there is a lot of WAL traffic, because the latch used to put the
walsender to sleep is also signalled by regular WAL traffic (and each
signal causes an additional batch of data to be sent); the net effect is
that there is no or little actual throttling. This is undesirable, so
rewrite the sleep into a loop to achieve the desired effeect.
Author: Jeff Janes, small tweaks by me
Reviewed-by: Antonin Houska
Discussion: https://postgr.es/m/CAMkU=1xH6mde-yL-Eo1TKBGNd0PB1-TMxvrNvqcAkN-qr2E9mw@mail.gmail.com
|
