| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As noted by Tom Lane the improvements in 4b4b680c3d6 had the problem
that in some situations we searched, entered and modified entries in
the private refcount hash while holding a spinlock. I had tried to
keep the logic entirely local to PinBuffer_Locked(), but that's not
really possible given it's called with a spinlock held...
Besides being disadvantageous from a performance point of view, this
also has problems with error handling safety. If we failed inserting
an entry into the hashtable due to an out of memory error, we'd error
out with a held spinlock. Not good.
Change the way private refcounts are manipulated: Before a buffer can
be tracked an entry has to be reserved using
ReservePrivateRefCountEntry(); then, if a entry is not found using
GetPrivateRefCountEntry(), it can be entered with
NewPrivateRefCountEntry().
Also take advantage of the fact that PinBuffer_Locked() currently is
never called for buffers that already have been pinned by the current
backend and don't search the private refcount entries for preexisting
local pins. That results in a small, but measurable, performance
improvement.
Additionally make ReleaseBuffer() always call UnpinBuffer() for shared
buffers. That avoids duplicating work in an eventual UnpinBuffer()
call that already has been done in ReleaseBuffer() and also saves some
code.
Per discussion with Tom Lane.
Discussion: 15028.1418772313@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since their introduction latches have required barriers in SetLatch
and ResetLatch - but when they were introduced there wasn't any
barrier abstraction. Instead latches were documented to rely on the
callsites to provide barrier semantics.
Now that the barrier support looks halfway complete, add the necessary
barriers to both latch implementations.
Also remove a now superflous lock acquisition from syncrep.c and a
superflous (and insufficient) barrier from freelist.c. There might be
other cases that can now be simplified, but those are the only ones
I've seen on a quick scan.
We might want to backpatch this at some later point, but right now the
barrier infrastructure in the backbranches isn't totally on par with
master.
Discussion: 20150112154026.GB2092@awork2.anarazel.de
|
| |
|
|
| |
Backpatch certain files through 9.0
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
StrategyGetBuffer() has proven to be a bottleneck in a number of
buffer acquisition heavy workloads. To some degree this has already
been alleviated by 5d7962c6, but it still can be quite a heavy
bottleneck. The problem is that in unfortunate usage patterns a
single StrategyGetBuffer() call will have to look at a large number of
buffers - in turn making it likely that the process will be put to
sleep while still holding the spinlock.
Replace most of the usage of the buffer_strategy_lock spinlock for the
clock sweep by a atomic nextVictimBuffer variable. That variable,
modulo NBuffers, is the current hand of the clock sweep. The buffer
clock-sweep then only needs to acquire the spinlock after a
wraparound. And even then only in the process that did the wrapping
around. That alleviates nearly all the contention on the relevant
spinlock, although significant contention on the cacheline can still
exist.
Reviewed-By: Robert Haas and Amit Kapila
Discussion: 20141010160020.GG6670@alap3.anarazel.de,
20141027133218.GA2639@awork2.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, if you wanted anything besides C-string hash keys, you had to
specify a custom hashing function to hash_create(). Nearly all such
callers were specifying tag_hash or oid_hash; which is tedious, and rather
error-prone, since a caller could easily miss the opportunity to optimize
by using hash_uint32 when appropriate. Replace this with a design whereby
callers using simple binary-data keys just specify HASH_BLOBS and don't
need to mess with specific support functions. hash_create() itself will
take care of optimizing when the key size is four bytes.
This nets out saving a few hundred bytes of code space, and offers
a measurable performance improvement in tidbitmap.c (which was not
exploiting the opportunity to use hash_uint32 for its 4-byte keys).
There might be some wins elsewhere too, I didn't analyze closely.
In future we could look into offering a similar optimized hashing function
for 8-byte keys. Under this design that could be done in a centralized
and machine-independent fashion, whereas getting it right for keys of
platform-dependent sizes would've been notationally painful before.
For the moment, the old way still works fine, so as not to break source
code compatibility for loadable modules. Eventually we might want to
remove tag_hash and friends from the exported API altogether, since there's
no real need for them to be explicitly referenced from outside dynahash.c.
Teodor Sigaev and Tom Lane
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There was a window in RestoreBackupBlock where a page would be zeroed out,
but not yet locked. If a backend pinned and locked the page in that window,
it saw the zeroed page instead of the old page or new page contents, which
could lead to missing rows in a result set, or errors.
To fix, replace RBM_ZERO with RBM_ZERO_AND_LOCK, which atomically pins,
zeroes, and locks the page, if it's not in the buffer cache already.
In stable branches, the old RBM_ZERO constant is renamed to RBM_DO_NOT_USE,
to avoid breaking any 3rd party extensions that might use RBM_ZERO. More
importantly, this avoids renumbering the other enum values, which would
cause even bigger confusion in extensions that use ReadBufferExtended, but
haven't been recompiled.
Backpatch to all supported versions; this has been racy since hot standby
was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CREATE DATABASE and ALTER DATABASE .. SET TABLESPACE copy the source
database directory on the filesystem level. To ensure the on disk
state is consistent they block out users of the affected database and
force a checkpoint to flush out all data to disk. Unfortunately, up to
now, that checkpoint didn't flush out dirty buffers from unlogged
relations.
That bug means there could be leftover dirty buffers in either the
template database, or the database in its old location. Leading to
problems when accessing relations in an inconsistent state; and to
possible problems during shutdown in the SET TABLESPACE case because
buffers belonging files that don't exist anymore are flushed.
This was reported in bug #10675 by Maxim Boguk.
Fix by Pavan Deolasee, modified somewhat by me. Reviewed by MauMau and
Fujii Masao.
Backpatch to 9.1 where unlogged tables were introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, we used an lwlock that was held from the time we began
seeking a candidate buffer until the time when we found and pinned
one, which is disastrous for concurrency. Instead, use a spinlock
which is held just long enough to pop the freelist or advance the
clock sweep hand, and then released. If we need to advance the clock
sweep further, we reacquire the spinlock once per buffer.
This represents a significant increase in atomic operations around
buffer eviction, but it still wins on many workloads. On others, it
may result in no gain, or even cause a regression, unless the number
of buffer mapping locks is also increased. However, that seems like
material for a separate commit. We may also need to consider other
methods of mitigating contention on this spinlock, such as splitting
it into multiple locks or jumping the clock sweep hand more than one
buffer at a time, but those, too, seem like separate improvements.
Patch by me, inspired by a much larger patch from Amit Kapila.
Reviewed by Andres Freund.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since the dawn of time (aka Postgres95) multiple pins of the same
buffer by one backend have been optimized not to modify the shared
refcount more than once. This optimization has always used a NBuffer
sized array in each backend keeping track of a backend's pins.
That array (PrivateRefCount) was one of the biggest per-backend memory
allocations, depending on the shared_buffers setting. Besides the
waste of memory it also has proven to be a performance bottleneck when
assertions are enabled as we make sure that there's no remaining pins
left at the end of transactions. Also, on servers with lots of memory
and a correspondingly high shared_buffers setting the amount of random
memory accesses can also lead to poor cpu cache efficiency.
Because of these reasons a backend's buffers pins are now kept track
of in a small statically sized array that overflows into a hash table
when necessary. Benchmarks have shown neutral to positive performance
results with considerably lower memory usage.
Patch by me, review by Robert Haas.
Discussion: 20140321182231.GA17111@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
get_raw_page tried to validate the supplied block number against
RelationGetNumberOfBlocks(), which of course is only right when
accessing the main fork. In most cases, the main fork is longer
than the others, so that the check was too weak (allowing a
lower-level error to be reported, but no real harm to be done).
However, very small tables could have an FSM larger than their heap,
in which case the mistake prevented access to some FSM pages.
Per report from Torsten Foertsch.
In passing, make the bad-block-number error into an ereport not elog
(since it's certainly not an internal error); and fix sloppily
maintained comment for RelationGetNumberOfBlocksInFork.
This has been wrong since we invented relation forks, so back-patch
to all supported branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The existance of the assert_enabled variable (backing the
debug_assertions GUC) reduced the amount of knowledge some static code
checkers (like coverity and various compilers) could infer from the
existance of the assertion. That could have been solved by optionally
removing the assertion_enabled variable from the Assert() et al macros
at compile time when some special macro is defined, but the resulting
complication doesn't seem to be worth the gain from having
debug_assertions. Recompiling is fast enough.
The debug_assertions GUC is still available, but readonly, as it's
useful when diagnosing problems. The commandline/client startup option
-A, which previously also allowed to enable/disable assertions, has
been removed as it doesn't serve a purpose anymore.
While at it, reduce code duplication in bufmgr.c and localbuf.c
assertions checking for spurious buffer pins. That code had to be
reindented anyway to cope with the assert_enabled removal.
|
| |
|
|
|
| |
This includes removing tabs after periods in C comments, which was
applied to back branches, so this change should not effect backpatching.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit a73018392636ce832b09b5c31f6ad1f18a4643ea created rather a mess by
putting dependencies on backend-only include files into include/common.
We really shouldn't do that. To clean it up:
* Move TABLESPACE_VERSION_DIRECTORY back to its longtime home in
catalog/catalog.h. We won't consider this symbol part of the FE/BE API.
* Push enum ForkNumber from relfilenode.h into relpath.h. We'll consider
relpath.h as the source of truth for fork numbers, since relpath.c was
already partially serving that function, and anyway relfilenode.h was
kind of a random place for that enum.
* So, relfilenode.h now includes relpath.h rather than vice-versa. This
direction of dependency is fine. (That allows most, but not quite all,
of the existing explicit #includes of relpath.h to go away again.)
* Push forkname_to_number from catalog.c to relpath.c, just to centralize
fork number stuff a bit better.
* Push GetDatabasePath from catalog.c to relpath.c; it was rather odd
that the previous commit didn't keep this together with relpath().
* To avoid needing relfilenode.h in common/, redefine the underlying
function (now called GetRelationPath) as taking separate OID arguments,
and make the APIs using RelFileNode or RelFileNodeBackend into macro
wrappers. (The macros have a potential multiple-eval risk, but none of
the existing call sites have an issue with that; one of them had such a
risk already anyway.)
* Fix failure to follow the directions when "init" fork type was added;
specifically, the errhint in forkname_to_number wasn't updated, and neither
was the SGML documentation for pg_relation_size().
* Fix tablespace-path-too-long check in CreateTableSpace() to account for
fork-name component of maximum-length pathnames. This requires putting
FORKNAMECHARS into a header file, but it was rather useless (and
actually unreferenced) where it was.
The last couple of items are potentially back-patchable bug fixes,
if anyone is sufficiently excited about them; but personally I'm not.
Per a gripe from Christoph Berg about how include/common wasn't
self-contained.
|
| |
|
|
|
|
|
|
|
|
| |
Previously, such buffers weren't counted, with the possible result that
EXPLAIN (BUFFERS) and pg_stat_statements would understate the true
number of blocks dirtied by an SQL statement.
Back-patch to 9.2, where this counter was introduced.
Amit Kapila
|
| |
|
|
| |
Vik Fearing
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This makes it possible to store lwlocks as part of some other data
structure in the main shared memory segment, or in a dynamic shared
memory segment. There is still a main LWLock array and this patch does
not move anything out of it, but it provides necessary infrastructure
for doing that in the future.
This change is likely to increase the size of LWLockPadded on some
platforms, especially 32-bit platforms where it was previously only
16 bytes.
Patch by me. Review by Andres Freund and KaiGai Kohei.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In ordinary operation, VACUUM must be careful to take a cleanup lock on
each leaf page of a btree index; this ensures that no indexscans could
still be "in flight" to heap tuples due to be deleted. (Because of
possible index-tuple motion due to concurrent page splits, it's not enough
to lock only the pages we're deleting index tuples from.) In Hot Standby,
the WAL replay process must likewise lock every leaf page. There were
several bugs in the code for that:
* The replay scan might come across unused, all-zero pages in the index.
While btree_xlog_vacuum itself did the right thing (ie, nothing) with
such pages, xlogutils.c supposed that such pages must be corrupt and
would throw an error. This accounts for various reports of replication
failures with "PANIC: WAL contains references to invalid pages". To
fix, add a ReadBufferMode value that instructs XLogReadBufferExtended
not to complain when we're doing this.
* btree_xlog_vacuum performed the extra locking if standbyState ==
STANDBY_SNAPSHOT_READY, but that's not the correct test: we won't open up
for hot standby queries until the database has reached consistency, and
we don't want to do the extra locking till then either, for fear of reading
corrupted pages (which bufmgr.c would complain about). Fix by exporting a
new function from xlog.c that will report whether we're actually in hot
standby replay mode.
* To ensure full coverage of the index in the replay scan, btvacuumscan
would emit a dummy WAL record for the last page of the index, if no
vacuuming work had been done on that page. However, if the last page
of the index is all-zero, that would result in corruption of said page,
since the functions called on it weren't prepared to handle that case.
There's no need to lock any such pages, so change the logic to target
the last normal leaf page instead.
The first two of these bugs were diagnosed by Andres Freund, the other one
by me. Fixes based on ideas from Heikki Linnakangas and myself.
This has been wrong since Hot Standby was introduced, so back-patch to 9.0.
|
| |
|
|
|
| |
Update all files in head, and files COPYRIGHT and legal.sgml in all back
branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of changing the tuple xmin to FrozenTransactionId, the combination
of HEAP_XMIN_COMMITTED and HEAP_XMIN_INVALID, which were previously never
set together, is now defined as HEAP_XMIN_FROZEN. A variety of previous
proposals to freeze tuples opportunistically before vacuum_freeze_min_age
is reached have foundered on the objection that replacing xmin by
FrozenTransactionId might hinder debugging efforts when things in this
area go awry; this patch is intended to solve that problem by keeping
the XID around (but largely ignoring the value to which it is set).
Third-party code that checks for HEAP_XMIN_INVALID on tuples where
HEAP_XMIN_COMMITTED might be set will be broken by this change. To fix,
use the new accessor macros in htup_details.h rather than consulting the
bits directly. HeapTupleHeaderGetXmin has been modified to return
FrozenTransactionId when the infomask bits indicate that the tuple is
frozen; use HeapTupleHeaderGetRawXmin when you already know that the
tuple isn't marked commited or frozen, or want the raw value anyway.
We currently do this in routines that display the xmin for user consumption,
in tqual.c where it's known to be safe and important for the avoidance of
extra cycles, and in the function-caching code for various procedural
languages, which shouldn't invalidate the cache just because the tuple
gets frozen.
Robert Haas and Andres Freund
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
WAL records of hint bit updates is useful to tools that want to examine
which pages have been modified. In particular, this is required to make
the pg_rewind tool safe (without checksums).
This can also be used to test how much extra WAL-logging would occur if
you enabled checksums, without actually enabling them (which you can't
currently do without re-initdb'ing).
Sawada Masahiko, docs by Samrat Revagade. Reviewed by Dilip Kumar, with
further changes by me.
|
| |
|
|
| |
Etsuro Fujita
|
| |
|
|
|
|
|
|
|
|
| |
MarkBufferDirtyHint() writes WAL, and should know if it's got a
standard buffer or not. Currently, the only callers where buffer_std
is false are related to the FSM.
In passing, rename XLOG_HINT to XLOG_FPI, which is more descriptive.
Back-patch to 9.3.
|
| |
|
|
|
|
|
|
|
|
| |
pg_filedump and other external utility programs are likely to want to be
able to check Postgres page checksums. To avoid messy duplication of code,
move the checksumming functionality into an exported header file, much as
we did awhile back for the CRC code.
In passing, get rid of an unportable assumption that a static char[] array
will be word-aligned, and do some other minor code beautification.
|
| |
|
|
|
| |
This is the first run of the Perl-based pgindent script. Also update
pgindent instructions.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We copy the buffer before inserting an XLOG_HINT to avoid WAL CRC errors
caused by concurrent hint writes to buffer while share locked. To make this work
we refactor RestoreBackupBlock() to allow an XLOG_HINT to avoid the normal
path for backup blocks, which assumes the underlying buffer is exclusive locked.
Resulting code completely changes layout of XLOG_HINT WAL records, but
this isn't even beta code, so this is a low impact change.
In passing, avoid taking WALInsertLock for full page writes on checksummed
hints, remove related cruft from XLogInsert() and improve xlog_desc record for
XLOG_HINT.
Andres Freund
Bug report by Fujii Masao, testing by Jeff Janes and Jaime Casanova,
review by Jeff Davis and Simon Riggs. Applied with changes from review
and some comment editing.
|
| |
|
|
| |
From performance analysis by Heikki Linnakangas
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Checksums are set immediately prior to flush out of shared buffers
and checked when pages are read in again. Hint bit setting will
require full page write when block is dirtied, which causes various
infrastructure changes. Extensive comments, docs and README.
WARNING message thrown if checksum fails on non-all zeroes page;
ERROR thrown but can be disabled with ignore_checksum_failure = on.
Feature enabled by an initdb option, since transition from option off
to option on is long and complex and has not yet been implemented.
Default is not to use checksums.
Checksum used is WAL CRC-32 truncated to 16-bits.
Simon Riggs, Jeff Davis, Greg Smith
Wide input and assistance from many community members. Thank you.
|
| |
|
|
|
|
|
|
|
|
| |
Formerly we just Assert'ed that each refcount was zero, which was quick
and easy but failed to provide a good overview of what was wrong.
Change the code so that we'll call PrintBufferLeakWarning() for each
buffer with a nonzero refcount, and then Assert at the end of the loop.
This costs nothing in runtime and might ease diagnosis of some bugs.
Greg Smith, reviewed by Satoshi Nagayasu, further tweaked by me
|
| |
|
|
|
|
|
| |
This enables non-backend code, such as pg_xlogdump, to use it easily.
The previous location, in src/backend/catalog/catalog.c, made that
essentially impossible because that file depends on many backend-only
facilities; so this needs to live separately.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The reason this wasn't supported before was that GiST indexes need an
increasing sequence to detect concurrent page-splits. In a regular WAL-
logged GiST index, the LSN of the page-split record is used for that
purpose, and in a temporary index, we can get away with a backend-local
counter. Neither of those methods works for an unlogged relation.
To provide such an increasing sequence of numbers, create a "fake LSN"
counter that is saved and restored across shutdowns. On recovery, unlogged
relations are blown away, so the counter doesn't need to survive that
either.
Jeevan Chalke, based on discussions with Robert Haas, Tom Lane and me.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When relations are dropped, at end of transaction we need to remove the
files and clean the buffer pool of buffers containing pages of those
relations. Previously we would scan the buffer pool once per relation
to clean up buffers. When there are many relations to drop, the
repeated scans make this process slow; so we now instead pass a list of
relations to drop and scan the pool once, checking each buffer against
the passed list. When the number of relations is larger than a
threshold (which as of this patch is being set to 20 relations) we sort
the array before starting, and bsearch the array; when it's smaller, we
simply scan the array linearly each time, because that's faster. The
exact optimal threshold value depends on many factors, but the
difference is not likely to be significant enough to justify making it
user-settable.
This has been measured to be a significant win (a 15x win when dropping
100,000 relations; an extreme case, but reportedly a real one).
Author: Tomas Vondra, some tweaks by me
Reviewed by: Robert Haas, Shigeru Hanada, Andres Freund, Álvaro Herrera
|
| |
|
|
|
| |
Fully update git head, and update back branches in ./COPYRIGHT and
legal.sgml files.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
errcontext() is typically used in an error context callback function, not
within an ereport() invocation like e.g errmsg and errdetail are. That means
that the message domain that the TEXTDOMAIN magic in ereport() determines
is not the right one for the errcontext() calls. The message domain needs to
be determined by the C file containing the errcontext() call, not the file
containing the ereport() call.
Fix by turning errcontext() into a macro that passes the TEXTDOMAIN to use
for the errcontext message. "errcontext" was used in a few places as a
variable or struct field name, I had to rename those out of the way, now
that errcontext is a macro.
We've had this problem all along, but this isn't doesn't seem worth
backporting. It's a fairly minor issue, and turning errcontext from a
function to a macro requires at least a recompile of any external code that
calls errcontext().
|
| |
|
|
|
|
|
|
|
|
| |
This reverts commit fba105b1099f4f5fa7283bb17cba6fed2baa8d0c.
That approach had problems with the smgr-level state not tracking what
we really want to happen, and with the VFD-level state not tracking the
smgr-level state very well either. In consequence, it was still possible
to hold kernel file descriptors open for long-gone tables (as in recent
report from Tore Halset), and yet there were also cases of FDs being closed
undesirably soon. A replacement implementation will follow.
|
| |
|
|
|
|
|
|
|
| |
Recovery code documents clearly that a shutdown checkpoint is executed at
end of recovery - a shutdown checkpoint WAL record is written but the buffer
manager had been altered to treat end of recovery as a normal checkpoint.
This bug exacerbates the bufmgr relpersistence bug.
Bug spotted by Andres Freund, patch by me.
|
| |
|
|
|
|
|
| |
This can result in buffers failing to be properly flushed at
checkpoint time, leading to data loss.
Report, diagnosis, and patch by Jeff Davis.
|
| |
|
|
|
| |
This lets files that are mere users of ResourceOwner not automatically
include the headers for stuff that is managed by the resowner mechanism.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In all branches back to 8.3, this patch fixes a questionable assumption in
CompactCheckpointerRequestQueue/CompactBgwriterRequestQueue that there are
no uninitialized pad bytes in the request queue structs. This would only
cause trouble if (a) there were such pad bytes, which could happen in 8.4
and up if the compiler makes enum ForkNumber narrower than 32 bits, but
otherwise would require not-currently-planned changes in the widths of
other typedefs; and (b) the kernel has not uniformly initialized the
contents of shared memory to zeroes. Still, it seems a tad risky, and we
can easily remove any risk by pre-zeroing the request array for ourselves.
In addition to that, we need to establish a coding rule that struct
RelFileNode can't contain any padding bytes, since such structs are copied
into the request array verbatim. (There are other places that are assuming
this anyway, it turns out.)
In 9.1 and up, the risk was a bit larger because we were also effectively
assuming that struct RelFileNodeBackend contained no pad bytes, and with
fields of different types in there, that would be much easier to break.
However, there is no good reason to ever transmit fsync or delete requests
for temp files to the bgwriter/checkpointer, so we can revert the request
structs to plain RelFileNode, getting rid of the padding risk and saving
some marginal number of bytes and cycles in fsync queue manipulation while
we are at it. The savings might be more than marginal during deletion of
a temp relation, because the old code transmitted an entirely useless but
nonetheless expensive-to-process ForgetRelationFsync request to the
background process, and also had the background process perform the file
deletion even though that can safely be done immediately.
In addition, make some cleanup of nearby comments and small improvements to
the code in CompactCheckpointerRequestQueue/CompactBgwriterRequestQueue.
|
| |
|
|
|
|
|
| |
The Solaris Studio compiler warns about these instances, unlike more
mainstream compilers such as gcc. But manual inspection showed that
the code is clearly not reachable, and we hope no worthy compiler will
complain about removing this code.
|
| |
|
|
| |
commit-fest.
|
| |
|
|
|
|
|
|
| |
This provides a speedup of about 4X when NBuffers is large enough.
There is also a useful reduction in sinval traffic, since we
only do CacheInvalidateSmgr() once not once per fork.
Simon Riggs, reviewed and somewhat revised by Tom Lane
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
DropRelFileNodeBuffers, DropDatabaseBuffers, FlushRelationBuffers, and
FlushDatabaseBuffers have to scan the whole shared_buffers pool because
we have no index structure that would find the target buffers any more
efficiently than that. This gets expensive with large NBuffers. We can
shave some cycles from these loops by prechecking to see if the current
buffer is interesting before we acquire the buffer header lock.
Ordinarily such a test would be unsafe, but in these cases it should be
safe because we are already assuming that the caller holds a lock that
prevents any new target pages from being loaded into the buffer pool
concurrently. Therefore, no buffer tag should be changing to a value of
interest, only away from a value of interest. So a false negative match
is impossible, while a false positive is safe because we'll recheck after
acquiring the buffer lock. Initial testing says that this speeds these
loops by a factor of 2X to 3X on common Intel hardware.
Patch for DropRelFileNodeBuffers by Jeff Janes (based on an idea of
Heikki's); extended to the remaining sequential scans by Tom Lane
|
| |
|
|
|
|
|
|
| |
In commit d526575f893c1a4e05ebd307e80203536b213a6d, we changed things so
that buffer usage counts are incremented when the buffer is pinned, rather
than when it is unpinned, but the README file didn't get the memo.
Report by Amit Kapila.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 6d90eaaa89a007e0d365f49d6436f35d2392cfeb added a hibernation mode
to the bgwriter to reduce the server's idle-power consumption. However,
its interaction with the detailed behavior of BgBufferSync's feedback
control loop wasn't very well thought out. That control loop depends
primarily on the rate of buffer allocation, not the rate of buffer
dirtying, so the hibernation mode has to be designed to operate only when
no new buffer allocations are happening. Also, the check for whether the
system is effectively idle was not quite right and would fail to detect
a constant low level of activity, thus allowing the bgwriter to go into
hibernation mode in a way that would let the cycle time vary quite a bit,
possibly further confusing the feedback loop. To fix, move the wakeup
support from MarkBufferDirty and SetBufferCommitInfoNeedsSave into
StrategyGetBuffer, and prevent the bgwriter from entering hibernation mode
unless no buffer allocations have happened recently.
In addition, fix the delaying logic to remove the problem of possibly not
responding to signals promptly, which was basically caused by trying to use
the process latch's is_set flag for multiple purposes. I can't prove it
but I'm suspicious that that hack was responsible for the intermittent
"postmaster does not shut down" failures we've been seeing in the buildfarm
lately. In any case it did nothing to improve the readability or
robustness of the code.
In passing, express the hibernation sleep time as a multiplier on
BgWriterDelay, not a constant. I'm not sure whether there's any value in
exposing the longer sleep time as an independently configurable setting,
but we can at least make it act like this for little extra code.
|
| |
|
|
|
| |
This seems more consistent with the pre-existing choices for names of
other statistics columns. Rename assorted internal identifiers to match.
|
| |
|
|
| |
This spelling seems significantly more readable to me.
|
| |
|
|
|
| |
Noah Misch spotted the fact that the old comment is in fact incorrect, due
to memory ordering hazards.
|
