aboutsummaryrefslogtreecommitdiff
path: root/src/backend/tcop
Commit message (Collapse)AuthorAge
...
* Do not accept interrupts in RESUME_INTERRUPTS() and END_CRIT_SECTION()Tom Lane2002-01-01
| | | | | | macros, but only at explicit CHECK_FOR_INTERRUPTS() calls. Not clear whether overenthusiastic acceptance of interrupts accounts for any real bugs, but it definitely seems risky and unnecessary.
* Replace pq_getbytes(&ch, 1) calls with pq_getbyte(), which is easierTom Lane2001-12-04
| | | | | | | to use and significantly faster. This tweak saves 25% (!) of the runtime of COPY IN in a test with 8000-character lines. I wouldn't normally commit a performance improvement this late in the cycle, but 25% got my attention...
* Some minor tweaks of REINDEX processing: grab exclusive lock a littleREL7_2_BETA3Tom Lane2001-11-20
| | | | earlier, make error checks more uniform.
* Clean up usage-statistics display code (ShowUsage and friends). StatFpTom Lane2001-11-10
| | | | is gone, usage messages now go through elog(DEBUG).
* New pgindent run with fixes suggested by Tom. Patch manually reviewed,Bruce Momjian2001-11-05
| | | | initdb/regression tests pass.
* Another pgindent run. Fixes enum indenting, and improves #endifBruce Momjian2001-10-28
| | | | spacing. Also adds space for one-line comments.
* pgindent run on all C files. Java run to follow. initdb/regressionBruce Momjian2001-10-25
| | | | tests pass.
* Fix getopt-vs-init_ps_display problem by copying original argv[] info,Tom Lane2001-10-21
| | | | | | per suggestion from Peter. Simplify several APIs by transmitting the original argv location directly from main.c to ps_status.c, instead of passing it down through several levels of subroutines.
* Set optreset on platforms that have it before launching postmasterTom Lane2001-10-19
| | | | | | subprocesses; perhaps this will fix portability problem just noted by Lockhart. Also, move test for bad permissions of DataDir to a more logical place.
* Ensure that all startup paths (postmaster, standalone postgres, orTom Lane2001-10-19
| | | | | | | bootstrap) check for a valid PG_VERSION file before looking at anything else in the data directory. This fixes confusing error report when trying to start current sources in a pre-7.1 data directory. Per trouble report from Rich Shepard 10/18/01.
* Move init_ps_display from postgres.c to postmaster.c, putting itTom Lane2001-10-19
| | | | | | | | | | | just after receipt of the startup packet. Now, postmaster children that are waiting for client authentication response will show as 'postgres: user database host authentication'. Also, do an init_ps_display for startup/shutdown/checkpoint subprocesses, so that they are readily identifiable as well. Fix an obscure race condition that could lead to Assert failure in the postmaster --- attempting to start a checkpoint process before any connections have been received led to calling PostmasterRandom before setting random_seed.
* Accept an INTERVAL argument for SET TIME ZONE per SQL99.Thomas G. Lockhart2001-10-18
| | | | | | | | | | | | | | | | | | | | | | | | | Modified the parser and the SET handlers to use full Node structures rather than simply a character string argument. Implement INTERVAL() YEAR TO MONTH (etc) syntax per SQL99. Does not yet accept the goofy string format that goes along with, but this should be fairly straight forward to fix now as a bug or later as a feature. Implement precision for the INTERVAL() type. Use the typmod mechanism for both of INTERVAL features. Fix the INTERVAL syntax in the parser: opt_interval was in the wrong place. INTERVAL is now a reserved word, otherwise we get reduce/reduce errors. Implement an explicit date_part() function for TIMETZ. Should fix coersion problem with INTERVAL reported by Peter E. Fix up some error messages for date/time types. Use all caps for type names within message. Fix recently introduced side-effect bug disabling 'epoch' as a recognized field for date_part() etc. Reported by Peter E. (??) Bump catalog version number. Rename "microseconds" current transaction time field from ...Msec to ...Usec. Duh! date/time regression tests updated for reference platform, but a few changes will be necessary for others.
* Break transformCreateStmt() into multiple routines and makeTom Lane2001-10-12
| | | | | | | | | transformAlterStmt() use these routines, instead of having lots of duplicate (not to mention should-have-been-duplicate) code. Adding a column with a CHECK constraint actually works now, and the tests to reject unsupported DEFAULT and NOT NULL clauses actually fire now. ALTER TABLE ADD PRIMARY KEY works, modulo having to have created the column(s) NOT NULL already.
* Fix typo in error message. Noted by laser@zhengmai.com.cn.Tom Lane2001-10-09
|
* Further cleanup of dynahash.c API, in pursuit of portability andTom Lane2001-10-05
| | | | | | | | | readability. Bizarre '(long *) TRUE' return convention is gone, in favor of just raising an error internally in dynahash.c when we detect hashtable corruption. HashTableWalk is gone, in favor of using hash_seq_search directly, since it had no hope of working with non-LONGALIGNable datatypes. Simplify some other code that was made undesirably grotty by promixity to HashTableWalk.
* Remove useless LockDisable() function and associated overhead, per myTom Lane2001-09-27
| | | | proposal of 26-Aug.
* Add an overall timeout on the client authentication cycle, so thatTom Lane2001-09-21
| | | | | | | a hung client or lost connection can't indefinitely block a postmaster child (not to mention the possibility of deliberate DoS attacks). Timeout is controlled by new authentication_timeout GUC variable, which I set to 60 seconds by default ... does that seem reasonable?
* EXPLAIN ANALYZE feature to measure and show actual runtimes and tupleTom Lane2001-09-18
| | | | | counts alongside the planner's estimates. By Martijn van Oosterhout, with some further work by Tom Lane.
* Clean up some confusion about where and how to set whereToSendOutput.Tom Lane2001-09-08
| | | | | | | | We will no longer try to send elog messages to the client before we have initialized backend libpq (oops); however, reporting bogus commandline switches via elog does work now (not irrelevant, because of PGOPTIONS). Fix problem with inappropriate sending of checkpoint-process messages to stderr.
* Enable SIGTERM and SIGQUIT during client authentication soJan Wieck2001-09-07
| | | | | | | the postmaster can kill the forked off processes when shutdown is requested. Jan
* Restructure pg_opclass, pg_amop, and pg_amproc per previous discussions inTom Lane2001-08-21
| | | | | | | | | | | | | | | | | | | | pgsql-hackers. pg_opclass now has a row for each opclass supported by each index AM, not a row for each opclass name. This allows pg_opclass to show directly whether an AM supports an opclass, and furthermore makes it possible to store additional information about an opclass that might be AM-dependent. pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we previously expected the user to remember to provide in CREATE INDEX commands. Lossiness is no longer an index-level property, but is associated with the use of a particular operator in a particular index opclass. Along the way, IndexSupportInitialize now uses the syscaches to retrieve pg_amop and pg_amproc entries. I find this reduces backend launch time by about ten percent, at the cost of a couple more special cases in catcache.c's IndexScanOK. Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane. initdb forced.
* Fix handling of SIGCHLD, per recent pghackers discussion: on someTom Lane2001-08-04
| | | | | | | platforms system(2) gets confused unless the signal handler is set to SIG_DFL, not SIG_IGN. pgstats.c now uses pqsignal() as it should, not signal(). Also, arrange for the stats collector process to show a reasonable ID in 'ps', rather than looking like a postmaster.
* Cleanup code for preparsing pg_hba.conf and pg_ident.conf. Store lineTom Lane2001-07-31
| | | | | | | | | number in the data structure so that we can give at least a minimally useful idea of where the mistake is when we issue syntax error messages. Move the ClientAuthentication() call to where it should have been in the first place, so that postmaster memory releasing can happen in a reasonable place also. Update obsolete comments, correct one real bug (auth_argument was not picked up correctly).
* Load pg_hba.conf and pg_ident.conf on startup and SIGHUP into List ofBruce Momjian2001-07-30
| | | | | | Lists, and use that for user validation. Bruce Momjian
* Partial indexes work again, courtesy of Martijn van Oosterhout.Tom Lane2001-07-16
| | | | | | Note: I didn't force an initdb, figuring that one today was enough. However, there is a new function in pg_proc.h, and pg_dump won't be able to dump partial indexes until you add that function.
* Fix erroneous GUC variable references from commandline-GUC patch.Tom Lane2001-06-29
|
* Fix a couple remaining places where GUC variables were assigned toTom Lane2001-06-25
| | | | directly, rather than through SetConfigOption().
* > Marko Kreen <marko@l-t.ee> writes:Bruce Momjian2001-06-23
| | | | | | | | | | | | | > > secure_ctx changes too. it will be PGC_BACKEND after '-p'. > > Oh, okay, I missed that part. Could we see the total state of the > patch --- ie, a diff against current CVS, not a bunch of deltas? > I've gotten confused about what's in and what's out. Ok, here it is. Cleared the ctx comment too - after -p it will be PGC_BACKEND in any case. Marko Kreen
* Statistical system views (yet without the config stuff, butJan Wieck2001-06-22
| | | | | | | it's hard to keep such massive changes in sync with the tree so I need to get it in and work from there now). Jan
* Handle reading of startup packet and authentication exchange after forkingPeter Eisentraut2001-06-20
| | | | | | | | | | a new postmaster child process. This should eliminate problems with authentication blocking (e.g., ident, SSL init) and also reduce problems with the accept queue filling up under heavy load. The option to send elog output to a different file per backend (postgres -o) has been disabled for now because the initialization would have to happen in a different order and it's not clear we want to keep this anyway.
* Back out SET ALL patch because it is breaking things.Bruce Momjian2001-06-19
|
* RESET ALL secondary patch:Bruce Momjian2001-06-18
| | | | | | | | | | Here is Tomified version of my 2 pending patches. Dropped the set_.._real change as it is not needed. Desc would be: * use GUC for settings from cmdline Marko Kreen
* Allow removal of system-named pg_* temp tables. Rename temp file/dir asBruce Momjian2001-06-18
| | | | pgsql_tmp.
* Extend GUC concepts of parse_hook and assign_hook to all four supportedTom Lane2001-06-12
| | | | | | | | | | | | datatypes, not only strings. parse_hook is useless for bool, I suppose, but it seems possibly useful for int and double to apply variable-specific constraints that are more complex than simple range limits. assign_hook is definitely useful for all datatypes --- we need it right now for bool to support date cache reset when changing Australian timezone rule setting. Also, clean up some residual problems with the reset all/show all patch, including memory leaks and mistaken reset of PostPortNumber. It seems best that RESET ALL not touch variables that don't have SUSET or USERSET context.
* Allow GRANT/REVOKE to/from more than one user per invocation. Command tagPeter Eisentraut2001-06-09
| | | | | | | | for GRANT/REVOKE is now just that, not "CHANGE". On the way, migrate some of the aclitem internal representation away from the parser and build a real parse tree instead. Also add some 'const' qualifiers.
* reset all: command line and .conf options change defaultsBruce Momjian2001-06-07
| | | | | | | | | | on RESET ALL those are restored. show all: GUC + non-GUC. SHOW ALL, RESET ALL Marko Kreen
* Remove fastpath.c's lame attempt at caching function lookup info acrossTom Lane2001-06-01
| | | | | | | | | calls. This has never actually cached anything, because postgres.c does each fastpath call as a separate transaction command, and so fastpath.c would always decide that its cache was outdated. If it had worked, it would now be failing for calls of oldstyle functions due to dangling pointers in the FmgrInfo struct. Rip it out for simplicity and bug- proofing.
* Remove OLD_FILE_NAMING code. No longer used.Bruce Momjian2001-05-30
|
* Make UPDATE and DELETE privileges distinct. Add REFERENCES and TRIGGERPeter Eisentraut2001-05-27
| | | | | privileges. INSERT and COPY FROM now require INSERT (only). Add privileges regression test.
* Rewrite of planner statistics-gathering code. ANALYZE is now available asTom Lane2001-05-07
| | | | | | | | | | | | | | | | | a separate statement (though it can still be invoked as part of VACUUM, too). pg_statistic redesigned to be more flexible about what statistics are stored. ANALYZE now collects a list of several of the most common values, not just one, plus a histogram (not just the min and max values). Random sampling is used to make the process reasonably fast even on very large tables. The number of values and histogram bins collected is now user-settable via an ALTER TABLE command. There is more still to do; the new stats are not being used everywhere they could be in the planner. But the remaining changes for this project should be localized, and the behavior is already better than before. A not-very-related change is that sorting now makes use of btree comparison routines if it can find one, rather than invoking '<' twice.
* Add debug_query_string global variable for pgmonitor and debugging use.Bruce Momjian2001-04-14
|
* Add period to message.Bruce Momjian2001-03-26
|
* Change message to _the_ administrator. There is only one administrativeBruce Momjian2001-03-26
| | | | | | account. This connection has been terminated by the administrator.
* Mark exception and assert global variables as DLLIMPORT, so that plpgsqlTom Lane2001-03-23
| | | | can be compiled with asserts enabled on Windoze.
* Remove dashes in comments that don't need them, rewrap with pgindent.Bruce Momjian2001-03-22
|
* pgindent run. Make it all clean.Bruce Momjian2001-03-22
|
* 'waiting' status display had extra space, removed.Bruce Momjian2001-03-14
| | | | Change the administrator to 'an' administrator.
* New shutdown wording:Bruce Momjian2001-03-14
| | | | This connection has been terminated by the administrator
* XLOG (and related) changes:Tom Lane2001-03-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Store two past checkpoint locations, not just one, in pg_control. On startup, we fall back to the older checkpoint if the newer one is unreadable. Also, a physical copy of the newest checkpoint record is kept in pg_control for possible use in disaster recovery (ie, complete loss of pg_xlog). Also add a version number for pg_control itself. Remove archdir from pg_control; it ought to be a GUC parameter, not a special case (not that it's implemented yet anyway). * Suppress successive checkpoint records when nothing has been entered in the WAL log since the last one. This is not so much to avoid I/O as to make it actually useful to keep track of the last two checkpoints. If the things are right next to each other then there's not a lot of redundancy gained... * Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs on alternate bytes. Polynomial borrowed from ECMA DLT1 standard. * Fix XLOG record length handling so that it will work at BLCKSZ = 32k. * Change XID allocation to work more like OID allocation. (This is of dubious necessity, but I think it's a good idea anyway.) * Fix a number of minor bugs, such as off-by-one logic for XLOG file wraparound at the 4 gig mark. * Add documentation and clean up some coding infelicities; move file format declarations out to include files where planned contrib utilities can get at them. * Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also possible to force a checkpoint by sending SIGUSR1 to the postmaster (undocumented feature...) * Defend against kill -9 postmaster by storing shmem block's key and ID in postmaster.pid lockfile, and checking at startup to ensure that no processes are still connected to old shmem block (if it still exists). * Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency stop, for symmetry with postmaster and xlog utilities. Clean up signal handling in bootstrap.c so that xlog utilities launched by postmaster will react to signals better. * Standalone bootstrap now grabs lockfile in target directory, as added insurance against running it in parallel with live postmaster.
* hold interupts during LockWaitCancel().Hiroshi Inoue2001-03-09
|
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-04 13:45:20 +0000