| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
gcc 12+ has complaints like the following:
../../../../../pgsql/src/backend/utils/adt/network.c: In function 'inetnot':
../../../../../pgsql/src/backend/utils/adt/network.c:1893:34: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
1893 | pdst[nb] = ~pip[nb];
| ~~~~~~~~~^~~~~~~~~~
../../../../../pgsql/src/include/utils/inet.h:27:23: note: at offset -1 into destination object 'ipaddr' of size 16
27 | unsigned char ipaddr[16]; /* up to 128 bits of address */
| ^~~~~~
../../../../../pgsql/src/include/utils/inet.h:27:23: note: at offset -1 into destination object 'ipaddr' of size 16
This is due to a compiler bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=104986
It has been a year since the bug has been reported without getting fixed. As
the warnings are verbose and use of gcc 12 is becoming more common, it seems
worth working around the bug. Particularly because a simple reformulation of
the loop condition fixes the issue and isn't any less readable.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/144536.1648326206@sss.pgh.pa.us
Backpatch: 11-
|
| |
|
|
|
|
|
|
|
| |
Convert bit_in, varbit_in, inet_in, cidr_in, macaddr_in, and
macaddr8_in to the new style.
Amul Sul, minor mods by me
Discussion: https://postgr.es/m/CAAJ_b97KeDWUdpTKGOaFYPv0OicjOu6EW+QYWj-Ywrgj_aEy1g@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
SUSv3 <netinet/in.h> defines struct sockaddr_in6, and all targeted Unix
systems have it. Windows has it in <ws2ipdef.h>. Remove the configure
probe, the macro and a small amount of dead code.
Also remove a mention of IPv6-less builds from the documentation, since
there aren't any.
This is similar to commits f5580882 and 077bf2f2 for Unix sockets. Even
though AF_INET6 is an "optional" component of SUSv3, there are no known
modern operating system without it, and it seems even less likely to be
omitted from future systems than AF_UNIX.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGKErNfhmvb_H0UprEmp4LPzGN06yR2_0tYikjzB-2ECMw@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, the specialized tuplesort routine inlined handling for
reverse-sort and NULLs-ordering but called the datum comparator via a
pointer in the SortSupport struct parameter. Testing has showed that we
can get a useful performance gain by specializing datum comparison for
the different representations of abbreviated keys -- signed and unsigned
64-bit integers and signed 32-bit integers. Almost all abbreviatable data
types will benefit -- the only exception for now is numeric, since the
datum comparison is more complex. The performance gain depends on data
type and input distribution, but often falls in the range of 10-20% faster.
Thomas Munro
Reviewed by Peter Geoghegan, review and performance testing by me
Discussion:
https://www.postgresql.org/message-id/CA%2BhUKGKKYttZZk-JMRQSVak%3DCXSJ5fiwtirFf%3Dn%3DPAbumvn1Ww%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This also involves renaming src/include/utils/hashutils.h, which
becomes src/include/common/hashfn.h. Perhaps an argument can be
made for keeping the hashutils.h name, but it seemed more
consistent to make it match the name of the file, and also more
descriptive of what is actually going on here.
Patch by me, reviewed by Suraj Kharage and Mark Dilger. Off-list
advice on how not to break the Windows build from Davinder Singh
and Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
|
| |
|
|
|
|
|
|
| |
This fixes various typos in docs and comments, and removes some orphaned
definitions.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/5da8e325-c665-da95-21e0-c8a99ea61fbf@gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Prefix inet_net_ntop and sibling routines with "pg_" to ensure that
they aren't mistaken for C-library functions. This fixes warnings
from cpluspluscheck on some platforms, and should help reduce reader
confusion everywhere, since our functions aren't exactly interchangeable
with the library versions (they may have different ideas about address
family codes).
This shouldn't be fixing any actual bugs, unless somebody's linker
is misbehaving, so no need to back-patch.
Discussion: https://postgr.es/m/20518.1559494394@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
| |
Add sort support for inet, including support for abbreviated keys.
Testing has shown that this reduces the time taken to sort medium to
large inet/cidr inputs by ~50-60% in realistic cases.
Author: Brandur Leach
Reviewed-By: Peter Geoghegan, Edmund Horner
Discussion: https://postgr.es/m/CABR_9B-PQ8o2MZNJ88wo6r-NxW2EFG70M96Wmcgf99G6HUQ3sw@mail.gmail.com
|
| |
|
|
|
|
|
|
|
| |
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
... as well as its implementation from backend/access/hash/hashfunc.c to
backend/utils/hash/hashfn.c.
access/hash is the place for the hash index AM, not really appropriate
for generic facilities, which is what hash_any is; having things the old
way meant that anything using hash_any had to include the AM's include
file, pointlessly polluting its namespace with unrelated, unnecessary
cruft.
Also move the HTEqual strategy number to access/stratnum.h from
access/hash.h.
To avoid breaking third-party extension code, add an #include
"utils/hashutils.h" to access/hash.h. (An easily removed line by
committers who enjoy their asbestos suits to protect them from angry
extension authors.)
Discussion: https://postgr.es/m/201901251935.ser5e4h6djt2@alvherre.pgsql
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For a long time, indxpath.c has had the ability to extract derived (lossy)
index conditions from certain operators such as LIKE. For just as long,
it's been obvious that we really ought to make that capability available
to extensions. This commit finally accomplishes that, by adding another
API for planner support functions that lets them create derived index
conditions for their functions. As proof of concept, the hardwired
"special index operator" code formerly present in indxpath.c is pushed
out to planner support functions attached to LIKE and other relevant
operators.
A weak spot in this design is that an extension needs to know OIDs for
the operators, datatypes, and opfamilies involved in the transformation
it wants to make. The core-code prototypes use hard-wired OID references
but extensions don't have that option for their own operators etc. It's
usually possible to look up the required info, but that may be slow and
inconvenient. However, improving that situation is a separate task.
I want to do some additional refactorization around selfuncs.c, but
that also seems like a separate task.
Discussion: https://postgr.es/m/15193.1548028093@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Clean up four places that result in compiler warnings when using recent
gcc with this warning class enabled (as seen on buildfarm members
calliphoridae, skink, and others). In all these places, this is purely
cosmetic, because the shift distance could not be large enough to risk
a change of sign, so there's no chance of implementation-dependent
behavior. Still, it's easy enough to avoid the warning by casting the
shifted value to unsigned, so let's do that.
Patch HEAD only, this isn't worth a back-patch.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If convert_to_scalar is passed a pair of datatypes it can't cope with,
its former behavior was just to elog(ERROR). While this is OK so far as
the core code is concerned, there's extension code that would like to use
scalarltsel/scalargtsel/etc as selectivity estimators for operators that
work on non-core datatypes, and this behavior is a show-stopper for that
use-case. If we simply allow convert_to_scalar to return FALSE instead of
outright failing, then the main logic of scalarltsel/scalargtsel will work
fine for any operator that behaves like a scalar inequality comparison.
The lack of conversion capability will mean that we can't estimate to
better than histogram-bin-width precision, since the code will effectively
assume that the comparison constant falls at the middle of its bin. But
that's still a lot better than nothing. (Someday we should provide a way
for extension code to supply a custom version of convert_to_scalar, but
today is not that day.)
While poking at this issue, we noted that the existing code for handling
type bytea in convert_to_scalar is several bricks shy of a load.
It assumes without checking that if the comparison value is type bytea,
the bounds values are too; in the worst case this could lead to a crash.
It also fails to detoast the input values, so that the comparison result is
complete garbage if any input is toasted out-of-line, compressed, or even
just short-header. I'm not sure how often such cases actually occur ---
the bounds values, at least, are probably safe since they are elements of
an array and hence can't be toasted. But that doesn't make this code OK.
Back-patch to all supported branches, partly because author requested that,
but mostly because of the bytea bugs. The change in API for the exposed
routine convert_network_to_scalar() is theoretically a back-patch hazard,
but it seems pretty unlikely that any third-party code is calling that
function directly.
Tomas Vondra, with some adjustments by me
Discussion: https://postgr.es/m/b68441b6-d18f-13ab-b43b-9a72188a4e02@2ndquadrant.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Historically, the selectivity functions have simply not distinguished
< from <=, or > from >=, arguing that the fraction of the population that
satisfies the "=" aspect can be considered to be vanishingly small, if the
comparison value isn't any of the most-common-values for the variable.
(If it is, the code path that executes the operator against each MCV will
take care of things properly.) But that isn't really true unless we're
dealing with a continuum of variable values, and in practice we seldom are.
If "x = const" would estimate a nonzero number of rows for a given const
value, then it follows that we ought to estimate different numbers of rows
for "x < const" and "x <= const", even if the const is not one of the MCVs.
Handling this more honestly makes a significant difference in edge cases,
such as the estimate for a tight range (x BETWEEN y AND z where y and z
are close together).
Hence, split scalarltsel into scalarltsel/scalarlesel, and similarly
split scalargtsel into scalargtsel/scalargesel. Adjust <= and >=
operator definitions to reference the new selectivity functions.
Improve the core ineq_histogram_selectivity() function to make a
correction for equality. (Along the way, I learned quite a bit about
exactly why that function gives good answers, which I tried to memorialize
in improved comments.)
The corresponding join selectivity functions were, and remain, just stubs.
But I chose to split them similarly, to avoid confusion and to prevent the
need for doing this exercise again if someone ever makes them less stubby.
In passing, change ineq_histogram_selectivity's clamp for extreme
probability estimates so that it varies depending on the histogram
size, instead of being hardwired at 0.0001. With the default histogram
size of 100 entries, you still get the old clamp value, but bigger
histograms should allow us to put more faith in edge values.
Tom Lane, reviewed by Aleksander Alekseev and Kuntal Ghosh
Discussion: https://postgr.es/m/12232.1499140410@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This will be useful for hash partitioning, which needs a way to seed
the hash functions to avoid problems such as a hash index on a hash
partitioned table clumping all values into a small portion of the
bucket space; it's also useful for anything that wants a 64-bit hash
value rather than a 32-bit hash value.
Just in case somebody wants a 64-bit hash value that is compatible
with the existing 32-bit hash values, make the low 32-bits of the
64-bit hash value match the 32-bit hash value when the seed is 0.
Robert Haas and Amul Sul
Discussion: http://postgr.es/m/CA+Tgmoafx2yoJuhCQQOL5CocEi-w_uG4S2xT0EtgiJnPGcHW3g@mail.gmail.com
|
| |
|
|
| |
Jon Nelson
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds in support for EUI-64 MAC addresses by adding a new data type
called 'macaddr8' (using our usual convention of indicating the number
of bytes stored).
This was largely a copy-and-paste from the macaddr data type, with
appropriate adjustments for having 8 bytes instead of 6 and adding
support for converting a provided EUI-48 (6 byte format) to the EUI-64
format. Conversion from EUI-48 to EUI-64 inserts FFFE as the 4th and
5th bytes but does not perform the IPv6 modified EUI-64 action of
flipping the 7th bit, but we add a function to perform that specific
action for the user as it may be commonly done by users who wish to
calculate their IPv6 address based on their network prefix and 48-bit
MAC address.
Author: Haribabu Kommi, with a good bit of rework of macaddr8_in by me.
Reviewed by: Vitaly Burovoy, Kuntal Ghosh
Discussion: https://postgr.es/m/CAJrrPGcUi8ZH+KkK+=TctNQ+EfkeCEHtMU_yo1mvX8hsk_ghNQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When building libpq, ip.c and md5.c were symlinked or copied from
src/backend/libpq into src/interfaces/libpq, but now that we have a
directory specifically for routines that are shared between the server and
client binaries, src/common/, move them there.
Some routines in ip.c were only used in the backend. Keep those in
src/backend/libpq, but rename to ifaddr.c to avoid confusion with the file
that's now in common.
Fix the comment in src/common/Makefile to reflect how libpq actually links
those files.
There are two more files that libpq symlinks directly from src/backend:
encnames.c and wchar.c. I don't feel compelled to move those right now,
though.
Patch by Michael Paquier, with some changes by me.
Discussion: <69938195-9c76-8523-0af8-eb718ea5b36e@iki.fi>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Merge several copies of "copy an inet value and adjust the mask length"
code to create a single, conveniently C-callable function. This function
is exported for future use by inet SPGiST support, but it's good cleanup
anyway since we had three slightly-different-for-no-good-reason copies.
(Extracted from a larger patch, to separate new code from refactoring
of old code)
Emre Hasegeli
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds the following functions:
box(point) -> box
bound_box(box, box) -> box
inet_same_family(inet, inet) -> bool
inet_merge(inet, inet) -> cidr
range_merge(anyrange, anyrange) -> anyrange
The first of these is also used to implement a new assignment cast from
point to box.
These functions are the first part of a base to implement an "inclusion"
operator class for BRIN, for multidimensional data types.
Author: Emre Hasegeli
Reviewed by: Andreas Karlsson
|
| |
|
|
| |
Haribabu Kommi, reviewed by Muhammad Asif Naeem
|
| |
|
|
|
| |
This includes removing tabs after periods in C comments, which was
applied to back branches, so this change should not effect backpatching.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This operator class can accelerate subnet/supernet tests as well as
btree-equivalent ordered comparisons. It also handles a new network
operator inet && inet (overlaps, a/k/a "is supernet or subnet of"),
which is expected to be useful in exclusion constraints.
Ideally this opclass would be the default for GiST with inet/cidr data,
but we can't mark it that way until we figure out how to do a more or
less graceful transition from the current situation, in which the
really-completely-bogus inet/cidr opclasses in contrib/btree_gist are
marked as default. Having the opclass in core and not default is better
than not having it at all, though.
While at it, add new documentation sections to allow us to officially
document GiST/GIN/SP-GiST opclasses, something there was never a clear
place to do before. I filled these in with some simple tables listing
the existing opclasses and the operators they support, but there's
certainly scope to put more information there.
Emre Hasegeli, reviewed by Andreas Karlsson, further hacking by me
|
| |
|
|
|
|
|
|
|
|
| |
The result is an int less than, equal to, or greater than zero, in the
style of memcmp (and, in fact, exactly the output of memcmp in some cases).
This comment previously said -1, 1, or 0, which was an overspecification,
as noted by Emre Hasegeli. All of the existing callers appear to be fine
with the actual behavior, so just fix the comment.
In passing, improve infelicitous formatting of some call sites.
|
| |
|
|
|
|
|
|
|
|
|
| |
I forgot to change the functions to use the PG_GETARG_INET_PP() macro,
when I changed DatumGetInetP() to unpack the datum, like Datum*P macros
usually do. Also, I screwed up the definition of the PG_GETARG_INET_PP()
macro, and didn't notice because it wasn't used.
This fixes the memory leak when sorting inet values, as reported
by Jochen Erwied and debugged by Andres Freund. Backpatch to 8.3, like
the previous patch that broke it.
|
| |
|
|
|
|
|
| |
a new macro, DatumGetInetPP(), that does not. This brings these macros
in line with other DatumGet*P() macros.
Backpatch to 8.3, where 1-byte header varlenas were introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Writing
if (getnameinfo(...))
handle_error();
reads quite strangely, so use something like
if (getnameinfo(...) != 0)
handle_error();
instead.
|
| | |
|
| | |
|
| |
|
|
|
|
| |
8, bitncmp() may dereference a pointer one byte out of bounds.
Chris Mikkelson (bug #5101)
|
| |
|
|
| |
provided by Andrew.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
strings. This patch introduces four support functions cstring_to_text,
cstring_to_text_with_len, text_to_cstring, and text_to_cstring_buffer, and
two macros CStringGetTextDatum and TextDatumGetCString. A number of
existing macros that provided variants on these themes were removed.
Most of the places that need to make such conversions now require just one
function or macro call, in place of the multiple notational layers that used
to be needed. There are no longer any direct calls of textout or textin,
and we got most of the places that were using handmade conversions via
memcpy (there may be a few still lurking, though).
This commit doesn't make any serious effort to eliminate transient memory
leaks caused by detoasting toasted text objects before they reach
text_to_cstring. We changed PG_GETARG_TEXT_P to PG_GETARG_TEXT_PP in a few
places where it was easy, but much more could be done.
Brendan Jurd and Tom Lane
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
and inet_server_addr() fail if the client connected over a "scoped" IPv6
address. In this case getnameinfo() will return a string ending with
a poorly-standardized "%something" zone specifier, which these functions
try to feed to network_in(), which won't take it. So that we don't lose
functionality altogether, suppress the zone specifier before giving the
string to network_in(). Per report from Brian Hirt.
TODO: probably someday the inet type should support scoped IPv6 addresses,
and then this patch should be reverted.
Backpatch to 8.2 ... is it worth going further?
|
| |
|
|
|
|
|
|
|
| |
This commit breaks any code that assumes that the mere act of forming a tuple
(without writing it to disk) does not "toast" any fields. While all available
regression tests pass, I'm not totally sure that we've fixed every nook and
cranny, especially in contrib.
Greg Stark with some help from Tom Lane
|
| |
|
|
|
|
|
|
|
|
|
| |
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
|
| |
|
|
| |
with other places.
|
| | |
|
| |
|
|
| |
inet operators.
|
| |
|
|
|
|
| |
minus inet.
Stephen R. van den Berg
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
| |
and rely exclusively on the SQL type system to tell the difference between
the types. Prevent creation of invalid CIDR values via casting from INET
or set_masklen() --- both of these operations now silently zero any bits
to the right of the netmask. Remove duplicate CIDR comparison operators,
letting the type rely on the INET operators instead.
|
| | |
|
| | |
|
| |
|
|
|
|
| |
rather than "return expr;" -- the latter style is used in most of the
tree. I kept the parentheses when they were necessary or useful because
the return expression was complex.
|
| |
|
|
|
|
|
|
|
| |
#define HIGHBIT (0x80)
#define IS_HIGHBIT_SET(ch) ((unsigned char)(ch) & HIGHBIT)
and removed CSIGNBIT and mapped it uses to HIGHBIT. I have also added
uses for IS_HIGHBIT_SET where appropriate. This change is
purely for code clarity.
|
| |
|
|
|
|
| |
exported routines of ip.c, md5.c, and fe-auth.c to begin with 'pg_'.
Also get rid of the vestigial fe_setauthsvc/fe_getauthsvc routines
altogether.
|
| | |
|
