| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The standard way to check for list emptiness is to compare the
List pointer to NIL; our list code goes out of its way to ensure
that that is the only representation of an empty list. (An
acceptable alternative is a plain boolean test for non-null
pointer, but explicit mention of NIL is usually preferable.)
Various places didn't get that memo and expressed the condition
with list_length(), which might not be so bad except that there
were such a variety of ways to check it exactly: equal to zero,
less than or equal to zero, less than one, yadda yadda. In the
name of code readability, let's standardize all those spellings
as "list == NIL" or "list != NIL". (There's probably some
microscopic efficiency gain too, though few of these look to be
at all performance-critical.)
A very small number of cases were left as-is because they seemed
more consistent with other adjacent list_length tests that way.
Peter Smith, with bikeshedding from a number of us
Discussion: https://postgr.es/m/CAHut+PtQYe+ENX5KrONMfugf0q6NHg4hR5dAhqEXEc2eefFeig@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The patch that added regcollation doesn't seem to have been too
thorough about supporting it everywhere that other reg* types
are supported. Fix that. (The find_expr_references omission
is moderately serious, since it could result in missing expression
dependencies. The others are less exciting.)
Noted while fixing bug #17483. Back-patch to v13 where
regcollation was added.
Discussion: https://postgr.es/m/1423433.1652722406@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This replaces all MemSet() calls with struct initialization where that
is easily and obviously possible. (For example, some cases have to
worry about padding bits, so I left those.)
(The same could be done with appropriate memset() calls, but this
patch is part of an effort to phase out MemSet(), so it doesn't touch
memset() calls.)
Reviewed-by: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/9847b13c-b785-f4e2-75c3-12ec77a3b05c@enterprisedb.com
|
| |
|
|
|
| |
Run pgindent, pgperltidy, and reformat-dat-files.
I manually fixed a couple of comments that pgindent uglified.
|
| |
|
|
|
|
|
|
|
| |
These are useless and distracting. We wouldn't have written the code
with them to begin with, so there's no reason to keep them.
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
Discussion: https://postgr.es/m/attachment/133167/0016-Extraneous-blank-lines.patch
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When evaluating a query with a multi-column GROUP BY clause using sort,
the cost may be heavily dependent on the order in which the keys are
compared when building the groups. Grouping does not imply any ordering,
so we're allowed to compare the keys in arbitrary order, and a Hash Agg
leverages this. But for Group Agg, we simply compared keys in the order
as specified in the query. This commit explores alternative ordering of
the keys, trying to find a cheaper one.
In principle, we might generate grouping paths for all permutations of
the keys, and leave the rest to the optimizer. But that might get very
expensive, so we try to pick only a couple interesting orderings based
on both local and global information.
When planning the grouping path, we explore statistics (number of
distinct values, cost of the comparison function) for the keys and
reorder them to minimize comparison costs. Intuitively, it may be better
to perform more expensive comparisons (for complex data types etc.)
last, because maybe the cheaper comparisons will be enough. Similarly,
the higher the cardinality of a key, the lower the probability we’ll
need to compare more keys. The patch generates and costs various
orderings, picking the cheapest ones.
The ordering of group keys may interact with other parts of the query,
some of which may not be known while planning the grouping. E.g. there
may be an explicit ORDER BY clause, or some other ordering-dependent
operation, higher up in the query, and using the same ordering may allow
using either incremental sort or even eliminate the sort entirely.
The patch generates orderings and picks those minimizing the comparison
cost (for various pathkeys), and then adds orderings that might be
useful for operations higher up in the plan (ORDER BY, etc.). Finally,
it always keeps the ordering specified in the query, on the assumption
the user might have additional insights.
This introduces a new GUC enable_group_by_reordering, so that the
optimization may be disabled if needed.
The original patch was proposed by Teodor Sigaev, and later improved and
reworked by Dmitry Dolgov. Reviews by a number of people, including me,
Andrey Lepikhov, Claudio Freire, Ibrar Ahmed and Zhihong Yu.
Author: Dmitry Dolgov, Teodor Sigaev, Tomas Vondra
Reviewed-by: Tomas Vondra, Andrey Lepikhov, Claudio Freire, Ibrar Ahmed, Zhihong Yu
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Discussion: https://postgr.es/m/CA%2Bq6zcW_4o2NC0zutLkOJPsFt80megSpX_dVRo6GK9PC-Jx_Ag%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add pg_statistic_ext_data.stxdinherit flag, so that for each extended
statistics definition we can store two versions of data - one for the
relation alone, one for the whole inheritance tree. This is analogous to
pg_statistic.stainherit, but we failed to include such flag in catalogs
for extended statistics, and we had to work around it (see commits
859b3003de, 36c4bc6e72 and 20b9fa308e).
This changes the relationship between the two catalogs storing extended
statistics objects (pg_statistic_ext and pg_statistic_ext_data). Until
now, there was a simple 1:1 mapping - for each definition there was one
pg_statistic_ext_data row, and this row was inserted while creating the
statistics (and then updated during ANALYZE). With the stxdinherit flag,
we don't know how many rows there will be (child relations may be added
after the statistics object is defined), so there may be up to two rows.
We could make CREATE STATISTICS to always create both rows, but that
seems wasteful - without partitioning we only need stxdinherit=false
rows, and declaratively partitioned tables need only stxdinherit=true.
So we no longer initialize pg_statistic_ext_data in CREATE STATISTICS,
and instead make that a responsibility of ANALYZE. Which is what we do
for regular statistics too.
Patch by me, with extensive improvements and fixes by Justin Pryzby.
Author: Tomas Vondra, Justin Pryzby
Reviewed-by: Tomas Vondra, Justin Pryzby
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 859b3003de disabled building of extended stats for inheritance
trees, to prevent updating the same catalog row twice. While that
resolved the issue, it also means there are no extended stats for
declaratively partitioned tables, because there are no data in the
non-leaf relations.
That also means declaratively partitioned tables were not affected by
the issue 859b3003de addressed, which means this is a regression
affecting queries that calculate estimates for the whole inheritance
tree as a whole (which includes e.g. GROUP BY queries).
But because partitioned tables are empty, we can invert the condition
and build statistics only for the case with inheritance, without losing
anything. And we can consider them when calculating estimates.
It may be necessary to run ANALYZE on partitioned tables, to collect
proper statistics. For declarative partitioning there should no prior
statistics, and it might take time before autoanalyze is triggered. For
tables partitioned by inheritance the statistics may include data from
child relations (if built 859b3003de), contradicting the current code.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since commit 859b3003de we only build extended statistics for individual
relations, ignoring the child relations. This resolved the issue with
updating catalog tuple twice, but we still tried to use the statistics
when calculating estimates for the whole inheritance tree. When the
relations contain very distinct data, it may produce bogus estimates.
This is roughly the same issue 427c6b5b9 addressed ~15 years ago, and we
fix it the same way - by ignoring extended statistics when calculating
estimates for the inheritance tree as a whole. We still consider
extended statistics when calculating estimates for individual child
relations, of course.
This may result in plan changes due to different estimates, but if the
old statistics were not describing the inheritance tree particularly
well it's quite likely the new plans is actually better.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
|
| |
|
|
| |
Backpatch-through: 10
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
get_variable_range() would incautiously believe that statistics
containing only an MCV list are sufficient to derive a range estimate.
That's okay for an enum-like column that contains only MCVs, but
otherwise the estimate could be pretty bad. Make it report that the
range is indeterminate unless the MCVs plus nullfrac account for
the whole table.
I don't think this needs a dedicated test case, since a quick code
coverage check verifies that the existing regression tests traverse
all the alternatives. There is room to doubt that a future-proof
test case could be built anyway, given that the submitted example
accidentally doesn't fail before v11.
Per bug #17207 from Simon Perepelitsa. Back-patch to v10.
In principle this has been broken all along, but I'm hesitant to
make such changes in 9.6, since if anyone is unhappy with 9.6.24's
behavior there will be no second chance to fix it.
Discussion: https://postgr.es/m/17207-5265aefa79e333b4@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The code inconsistently used "statistic object" or "statistics" where
the correct term, as discussed, is actually "statistics object". This
improves the state of the code to be more consistent.
While on it, fix an incorrect error message introduced in a4d75c8. This
error should never happen, as the code states, but it would be
misleading.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20210924215827.GS831@telsasoft.com
Backpatch-through: 14
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This case should be disallowed, just as FOR UPDATE with a plain
GROUP BY is disallowed; FOR UPDATE only makes sense when each row
of the query result can be identified with a single table row.
However, we missed teaching CheckSelectLocking() to check
groupingSets as well as groupClause, so that it would allow
degenerate grouping sets. That resulted in a bad plan and
a null-pointer dereference in the executor.
Looking around for other instances of the same bug, the only one
I found was in examine_simple_variable(). That'd just lead to
silly estimates, but it should be fixed too.
Per private report from Yaoguang Chen.
Back-patch to all supported branches.
|
| |
|
|
|
|
|
|
| |
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
|
| |
|
|
|
| |
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210416070310.GG3315@telsasoft.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Here we add a new output parameter to estimate_num_groups() to allow it to
inform the caller of additional, possibly useful information about the
estimation.
The new output parameter is a struct that currently contains just a single
field with a set of flags. This was done rather than having the flags as
an output parameter to allow future fields to be added without having to
change the signature of the function at a later date when we want to pass
back further information that might not be suitable to store in the flags
field.
It seems reasonable that one day in the future that the planner would want
to know more about the estimation. For example, how many individual sets
of statistics was the estimation generated from? The planner may want to
take that into account if we ever want to consider risks as well as costs
when generating plans.
For now, there's only 1 flag we set in the flags field. This is to
indicate if the estimation fell back on using the hard-coded constants in
any part of the estimation. Callers may like to change their behavior if
this is set, and this gives them the ability to do so. Callers may pass
the flag pointer as NULL if they have no interest in obtaining any
additional information about the estimate.
We're not adding any actual usages of these flags here. Some follow-up
commits will make use of this feature. Additionally, we're also not
making any changes to add support for clauselist_selectivity() and
clauselist_selectivity_ext(). However, if this is required in the future
then the same struct being added here should be fine to use as a new
output argument for those functions too.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqQqpk=1W-G_ds7A9CsXX3BggWj_7okinzkLVhDubQzjA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Allow defining extended statistics on expressions, not just just on
simple column references. With this commit, expressions are supported
by all existing extended statistics kinds, improving the same types of
estimates. A simple example may look like this:
CREATE TABLE t (a int);
CREATE STATISTICS s ON mod(a,10), mod(a,20) FROM t;
ANALYZE t;
The collected statistics are useful e.g. to estimate queries with those
expressions in WHERE or GROUP BY clauses:
SELECT * FROM t WHERE mod(a,10) = 0 AND mod(a,20) = 0;
SELECT 1 FROM t GROUP BY mod(a,10), mod(a,20);
This introduces new internal statistics kind 'e' (expressions) which is
built automatically when the statistics object definition includes any
expressions. This represents single-expression statistics, as if there
was an expression index (but without the index maintenance overhead).
The statistics is stored in pg_statistics_ext_data as an array of
composite types, which is possible thanks to 79f6a942bd.
CREATE STATISTICS allows building statistics on a single expression, in
which case in which case it's not possible to specify statistics kinds.
A new system view pg_stats_ext_exprs can be used to display expression
statistics, similarly to pg_stats and pg_stats_ext views.
ALTER TABLE ... ALTER COLUMN ... TYPE now treats indexes the same way it
treats indexes, i.e. it drops and recreates the statistics. This means
all statistics are reset, and we no longer try to preserve at least the
functional dependencies. This should not be a major issue in practice,
as the functional dependencies actually rely on per-column statistics,
which were always reset anyway.
Author: Tomas Vondra
Reviewed-by: Justin Pryzby, Dean Rasheed, Zhihong Yu
Discussion: https://postgr.es/m/ad7891d2-e90c-b446-9fe2-7419143847d7%40enterprisedb.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When estimating the number of groups using extended statistics, the code
was discarding information about system attributes. This led to strange
situation that
SELECT 1 FROM t GROUP BY ctid;
could have produced higher estimate (equal to pg_class.reltuples) than
SELECT 1 FROM t GROUP BY a, b, ctid;
with extended statistics on (a,b). Fixed by retaining information about
the system attribute.
Backpatch all the way to 10, where extended statistics were introduced.
Author: Tomas Vondra
Backpatch-through: 10
|
| |
|
|
|
|
|
|
| |
The portions fixing the documentation are backpatched where needed.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210210235557.GQ20012@telsasoft.com
backpatch-through: 9.6
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, pull_varnos() took the relids of a PlaceHolderVar as being
equal to the relids in its contents, but that fails to account for the
possibility that we have to postpone evaluation of the PHV due to outer
joins. This could result in a malformed plan. The known cases end up
triggering the "failed to assign all NestLoopParams to plan nodes"
sanity check in createplan.c, but other symptoms may be possible.
The right value to use is the join level we actually intend to evaluate
the PHV at. We can get that from the ph_eval_at field of the associated
PlaceHolderInfo. However, there are some places that call pull_varnos()
before the PlaceHolderInfos have been created; in that case, fall back
to the conservative assumption that the PHV will be evaluated at its
syntactic level. (In principle this might result in missing some legal
optimization, but I'm not aware of any cases where it's an issue in
practice.) Things are also a bit ticklish for calls occurring during
deconstruct_jointree(), but AFAICS the ph_eval_at fields should have
reached their final values by the time we need them.
The main problem in making this work is that pull_varnos() has no
way to get at the PlaceHolderInfos. We can fix that easily, if a
bit tediously, in HEAD by passing it the planner "root" pointer.
In the back branches that'd cause an unacceptable API/ABI break for
extensions, so leave the existing entry points alone and add new ones
with the additional parameter. (If an old entry point is called and
encounters a PHV, it'll fall back to using the syntactic level,
again possibly missing some valid optimization.)
Back-patch to v12. The computation is surely also wrong before that,
but it appears that we cannot reach a bad plan thanks to join order
restrictions imposed on the subquery that the PlaceHolderVar came from.
The error only became reachable when commit 4be058fe9 allowed trivial
subqueries to be collapsed out completely, eliminating their join order
restrictions.
Per report from Stephan Springl.
Discussion: https://postgr.es/m/171041.1610849523@sss.pgh.pa.us
|
| |
|
|
| |
Backpatch-through: 9.5
|
| |
|
|
|
|
|
|
|
|
| |
This has the advantage that the cost estimates for aggregates can count
the number of calls to transition and final functions correctly.
Bump catalog version, because views can contain Aggrefs.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/b2e3536b-1dbc-8303-c97e-89cb0b4a9a48%40iki.fi
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We have a dozen or so places that need to iterate over all but the
first cell of a List. Prior to v13 this was typically written as
for_each_cell(lc, lnext(list_head(list)))
Commit 1cff1b95a changed these to
for_each_cell(lc, list, list_second_cell(list))
This patch introduces a new macro for_each_from() which expresses
the start point as a list index, allowing these to be written as
for_each_from(lc, list, 1)
This is marginally more efficient, since ForEachState.i can be
initialized directly instead of backing into it from a ListCell
address. It also seems clearer and less typo-prone.
Some of the remaining uses of for_each_cell() look like they could
profitably be changed to for_each_from(), but here I confined myself
to changing uses of list_second_cell().
Also, fix for_each_cell_setup() and for_both_cell_setup() to
const-ify their arguments; that's a simple oversight in 1cff1b95a.
Back-patch into v13, on the grounds that (1) the const-ification
is a minor bug fix, and (2) it's better for back-patching purposes
if we only have two ways to write these loops rather than three.
In HEAD, also remove list_third_cell() and list_fourth_cell(),
which were also introduced in 1cff1b95a, and are unused as of
cc99baa43. It seems unlikely that any third-party code would
have started to use them already; anyone who has can be directed
to list_nth_cell instead.
Discussion: https://postgr.es/m/CAApHDvpo1zj9KhEpU2cCRZfSM3Q6XGdhzuAS2v79PH7WJBkYVA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Since commit 044c99bc5, eqjoinsel passes the passed-in collation
to any operators it invokes. However, neqjoinsel failed to pass
on whatever collation it got, so that if we invoked a
collation-dependent operator via that code path, we'd get "could not
determine which collation to use for string comparison" or the like.
Per report from Justin Pryzby. Back-patch to v12, like the previous
commit.
Discussion: https://postgr.es/m/20200721191606.GL5748@telsasoft.com
|
| |
|
|
|
|
|
|
| |
Timestamp can only be an int64 since b9d092c, and support for WITH OIDS
has been removed as of 578b229.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20200612023709.GC14879@telsasoft.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ineq_histogram_selectivity() can be invoked in situations where the
ordering we care about is not that of the column's histogram. We could
be considering some other collation, or even more drastically, the
query operator might not agree at all with what was used to construct
the histogram. (We'll get here for anything using scalarineqsel-based
estimators, so that's quite likely to happen for extension operators.)
Up to now we just ignored this issue and assumed we were dealing with
an operator/collation whose sort order exactly matches the histogram,
possibly resulting in junk estimates if the binary search gets confused.
It's past time to improve that, since the use of nondefault collations
is increasing. What we can do is verify that the given operator and
collation match what's recorded in pg_statistic, and use the existing
code only if so. When they don't match, instead execute the operator
against each histogram entry, and take the fraction of successes as our
selectivity estimate. This gives an estimate that is probably good to
about 1/histogram_size, with no assumptions about ordering. (The quality
of the estimate is likely to degrade near the ends of the value range,
since the two orderings probably don't agree on what is an extremal value;
but this is surely going to be more reliable than what we did before.)
At some point we might further improve matters by storing more than one
histogram calculated according to different orderings. But this code
would still be good fallback logic when no matches exist, so that is
not an argument for not doing this.
While here, also improve get_variable_range() to deal more honestly
with non-default collations.
This isn't back-patchable, because it requires adding another argument
to ineq_histogram_selectivity, and because it might have significant
impact on the estimation results for extension operators relying on
scalarineqsel --- mostly for the better, one hopes, but in any case
destabilizing plan choices in back branches is best avoided.
Per investigation of a report from James Lucas.
Discussion: https://postgr.es/m/CAAFmbbOvfi=wMM=3qRsPunBSLb8BFREno2oOzSBS=mzfLPKABw@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 5e0928005 changed the planner so that, instead of blindly using
DEFAULT_COLLATION_OID when invoking operators for selectivity estimation,
it would use the collation of the column whose statistics we're
considering. This was recognized as still being not quite the right
thing, but it seemed like a good incremental improvement. However,
shortly thereafter we introduced nondeterministic collations, and that
creates cases where operators can fail if they're passed the wrong
collation. We don't want planning to fail in cases where the query itself
would work, so this means that we *must* use the query's collation when
invoking operators for estimation purposes.
The only real problem this creates is in ineq_histogram_selectivity, where
the binary search might produce a garbage answer if we perform comparisons
using a different collation than the column's histogram is ordered with.
However, when the query's collation is significantly different from the
column's default collation, the estimate we previously generated would be
pretty irrelevant anyway; so it's not clear that this will result in
noticeably worse estimates in practice. (A follow-on patch will improve
this situation in HEAD, but it seems too invasive for back-patch.)
The patch requires changing the signatures of mcv_selectivity and allied
functions, which are exported and very possibly are used by extensions.
In HEAD, I just did that, but an API/ABI break of this sort isn't
acceptable in stable branches. Therefore, in v12 the patch introduces
"mcv_selectivity_ext" and so on, with signatures matching HEAD, and makes
the old functions into wrappers that assume DEFAULT_COLLATION_OID should
be used. That does not match the prior behavior, but it should avoid risk
of failure in most cases. (In practice, I think most extension datatypes
aren't collation-aware, so the change probably doesn't matter to them.)
Per report from James Lucas. Back-patch to v12 where the problem was
introduced.
Discussion: https://postgr.es/m/CAAFmbbOvfi=wMM=3qRsPunBSLb8BFREno2oOzSBS=mzfLPKABw@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Although selfuncs.c will never call a target operator with null inputs,
some functions might return null anyway. The existing coding will fail
if that happens (since FunctionCall2Coll will punt), which seems
undesirable given that matchingsel() has such a broad range of potential
applicability --- in fact, we already have a problem because we apply it
to jsonb_path_exists_opr, which can return null. Hence, rejigger the
underlying functions mcv_selectivity and histogram_selectivity to cope,
treating a null result as false.
While we are at it, we can move the InitFunctionCallInfoData overhead
out of the inner loops, which isn't a huge number of cycles but might
save something considering we are likely calling functions as cheap
as int4eq(). Plus, the number of loop cycles to be expected is much
more than it was when this code was written, since typical settings
of default_statistics_target are higher.
In view of that consideration, let's apply the same change to
var_eq_const, eqjoinsel_inner, and eqjoinsel_semi. We do not expect
equality functions to ever return null for non-null inputs (and
certainly that code has been that way a long time without complaints),
but the cycle savings seem attractive, especially in the eqjoinsel loops
where there's potentially an O(N^2) savings.
Similar code exists in ineq_histogram_selectivity and
get_variable_range, but I forebore from changing those for now.
The performance argument for changing ineq_histogram_selectivity
is really weak anyway, since that will only iterate log2(N) times.
Nikita Glukhov and Tom Lane
Discussion: https://postgr.es/m/9d3b0959-95d6-c37e-2c0b-287bcfe5c705@postgrespro.ru
|
| |
|
|
|
|
|
| |
"operator" is a reserved word in C++, so per project conventions,
don't use it as an identifier in header files.
My oversight in commit a80818605.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Quite a few matching operators such as JSONB's @> used "contsel" and
"contjoinsel" as their selectivity estimators. That was a bad idea,
because (a) contsel is only a stub, yielding a fixed default estimate,
and (b) that default is 0.001, meaning we estimate these operators as
five times more selective than equality, which is surely pretty silly.
There's a good model for improving this in ltree's ltreeparentsel():
for any "var OP constant" query, we can try applying the operator
to all of the column's MCV and histogram values, taking the latter
as being a random sample of the non-MCV values. That code is
actually 100% generic, except for the question of exactly what
default selectivity ought to be plugged in when we don't have stats.
Hence, migrate the guts of ltreeparentsel() into the core code, provide
wrappers "matchingsel" and "matchingjoinsel" with a more-appropriate
default estimate, and use those for the non-geometric operators that
formerly used contsel (mostly JSONB containment operators and tsquery
matching).
Also apply this code to some match-like operators in hstore, ltree, and
pg_trgm, including the former users of ltreeparentsel as well as ones
that improperly used contsel. Since commit 911e70207 just created new
versions of those extensions that we haven't released yet, we can sneak
this change into those new versions instead of having to create an
additional generation of update scripts.
Patch by me, reviewed by Alexey Bashtanov
Discussion: https://postgr.es/m/12237.1582833074@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PostgreSQL provides set of template index access methods, where opclasses have
much freedom in the semantics of indexing. These index AMs are GiST, GIN,
SP-GiST and BRIN. There opclasses define representation of keys, operations on
them and supported search strategies. So, it's natural that opclasses may be
faced some tradeoffs, which require user-side decision. This commit implements
opclass parameters allowing users to set some values, which tell opclass how to
index the particular dataset.
This commit doesn't introduce new storage in system catalog. Instead it uses
pg_attribute.attoptions, which is used for table column storage options but
unused for index attributes.
In order to evade changing signature of each opclass support function, we
implement unified way to pass options to opclass support functions. Options
are set to fn_expr as the constant bytea expression. It's possible due to the
fact that opclass support functions are executed outside of expressions, so
fn_expr is unused for them.
This commit comes with some examples of opclass options usage. We parametrize
signature length in GiST. That applies to multiple opclasses: tsvector_ops,
gist__intbig_ops, gist_ltree_ops, gist__ltree_ops, gist_trgm_ops and
gist_hstore_ops. Also we parametrize maximum number of integer ranges for
gist__int_ops. However, the main future usage of this feature is expected
to be json, where users would be able to specify which way to index particular
json parts.
Catversion is bumped.
Discussion: https://postgr.es/m/d22c3a18-31c7-1879-fc11-4c1ce2f5e5af%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Reviwed-by: Nikolay Shaplov, Robert Haas, Tom Lane, Tomas Vondra, Alvaro Herrera
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The need for this was removed by
8b9e9644dc6a9bd4b7a97950e6212f63880cf18b.
A number of files now need to include utils/acl.h or
parser/parse_node.h explicitly where they previously got it indirectly
somehow.
Since parser/parse_node.h already includes nodes/parsenodes.h, the
latter is then removed where the former was added. Also, remove
nodes/pg_list.h from objectaddress.h, since that's included via
nodes/parsenodes.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/7601e258-26b2-8481-36d0-dc9dca6f28f1%402ndquadrant.com
|
| |
|
|
|
|
| |
Consolidate the calculations for hash table size estimation. This will
help with upcoming Hash Aggregation work that will add additional call
sites.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The strategy of GIN index scan is driven by opclass-specific extract_query
method. This method that needed search mode is GIN_SEARCH_MODE_ALL. This
mode means that matching tuple may contain none of extracted entries. Simple
example is '!term' tsquery, which doesn't need any term to exist in matching
tsvector.
In order to handle such scan key GIN calculates virtual entry, which contains
all TIDs of all entries of attribute. In fact this is full scan of index
attribute. And typically this is very slow, but allows to handle some queries
correctly in GIN. However, current algorithm calculate such virtual entry for
each GIN_SEARCH_MODE_ALL scan key even if they are multiple for the same
attribute. This is clearly not optimal.
This commit improves the situation by introduction of "exclude only" scan keys.
Such scan keys are not capable to return set of matching TIDs. Instead, they
are capable only to filter TIDs produced by normal scan keys. Therefore,
each attribute should contain at least one normal scan key, while rest of them
may be "exclude only" if search mode is GIN_SEARCH_MODE_ALL.
The same optimization might be applied to the whole scan, not per-attribute.
But that leads to NULL values elimination problem. There is trade-off between
multiple possible ways to do this. We probably want to do this later using
some cost-based decision algorithm.
Discussion: https://postgr.es/m/CAOBaU_YGP5-BEt5Cc0%3DzMve92vocPzD%2BXiZgiZs1kjY0cj%3DXBg%40mail.gmail.com
Author: Nikita Glukhov, Alexander Korotkov, Tom Lane, Julien Rouhaud
Reviewed-by: Julien Rouhaud, Tomas Vondra, Tom Lane
|
| |
|
|
| |
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
| |
|
|
|
|
|
|
|
|
|
| |
This provides for cheaper mapping of child columns back to parent
columns. The one existing use-case in examine_simple_variable()
would hardly justify this by itself; but an upcoming bug fix will
make use of this array in a mainstream code path, and it seems
likely that we'll find other uses for it as we continue to build
out the partitioning infrastructure.
Discussion: https://postgr.es/m/12424.1575168015@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The fix for CVE-2017-7484 disallowed use of pg_statistic data for
planning purposes if the user would not be able to select the associated
column and a non-leakproof function is to be applied to the statistics
values. That turns out to disable use of pg_statistic data in some
common cases involving inheritance/partitioning, where the user does
have permission to select from the parent table that was actually named
in the query, but not from a child table whose stats are needed. Since,
in non-corner cases, the user *can* select the child table's data via
the parent, this restriction is not actually useful from a security
standpoint. Improve the logic so that we also check the permissions of
the originally-named table, and allow access if select permission exists
for that.
When checking access to stats for a simple child column, we can map
the child column number back to the parent, and perform this test
exactly (including not allowing access if the child column isn't
exposed by the parent). For expression indexes, the current logic
just insists on whole-table select access, and this patch allows
access if the user can select the whole parent table. In principle,
if the child table has extra columns, this might allow access to
stats on columns the user can't read. In practice, it's unlikely
that the planner is going to do any stats calculations involving
expressions that are not visible to the query, so we'll ignore that
fine point for now. Perhaps someday we'll improve that logic to
detect exactly which columns are used by an expression index ...
but today is not that day.
Back-patch to v11. The issue was created in 9.2 and up by the
CVE-2017-7484 fix, but this patch depends on the append_rel_array[]
planner data structure which only exists in v11 and up. In
practice the issue is most urgent with partitioned tables, so
fixing v11 and later should satisfy much of the practical need.
Dilip Kumar and Amit Langote, with some kibitzing by me
Discussion: https://postgr.es/m/3876.1531261875@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Trying to use hypothetical indexes with BRIN currently fails when trying
to access a relation that does not exist when looking for the
statistics. With the current API, it is not possible to easily pass
a value for pages_per_range down to the hypothetical index, so this
makes use of the default value of BRIN_DEFAULT_PAGES_PER_RANGE, which
should be fine enough in most cases.
Being able to refine or enforce the hypothetical costs in more
optimistic ways would require more refactoring by filling in the
statistics when building IndexOptInfo in plancat.c. This would involve
ABI breakages around the costing routines, something not fit for stable
branches.
This is broken since 7e534ad, so backpatch down to v10.
Author: Julien Rouhaud, Heikki Linnakangas
Reviewed-by: Álvaro Herrera, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CAOBaU_ZH0LKEA8VFCocr6Lpte1ab0b6FpvgS0y4way+RPSXfYg@mail.gmail.com
Backpatch-through: 10
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When estimating number of distinct groups, we failed to ignore system
attributes when matching the group expressions to mvdistinct stats,
causing failures like
ERROR: negative bitmapset member not allowed
Fix that by simply skipping anything that is not a regular attribute.
Backpatch to PostgreSQL 10, where the extended stats were introduced.
Bug: #16111
Reported-by: Tuomas Leikola
Author: Tomas Vondra
Backpatch-through: 10
Discussion: https://postgr.es/m/16111-687799584c3a7e73@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
| |
As of d9dd406fe281d22d5238d3c26a7182543c711e74, we require MSVC 2013,
which means _MSC_VER >= 1800. This means that conditionals about
older versions of _MSC_VER can be removed or simplified.
Previous code was also in some cases handling MinGW, where _MSC_VER is
not defined at all, incorrectly, such as in pg_ctl.c and win32_port.h,
leading to some compiler warnings. This should now be handled better.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the wake of commit 1cff1b95a, the result of list_concat no longer
shares the ListCells of the second input. Therefore, we can replace
"list_concat(x, list_copy(y))" with just "list_concat(x, y)".
To improve call sites that were list_copy'ing the first argument,
or both arguments, invent "list_concat_copy()" which produces a new
list sharing no ListCells with either input. (This is a bit faster
than "list_concat(list_copy(x), y)" because it makes the result list
the right size to start with.)
In call sites that were not list_copy'ing the second argument, the new
semantics mean that we are usually leaking the second List's storage,
since typically there is no remaining pointer to it. We considered
inventing another list_copy variant that would list_free the second
input, but concluded that for most call sites it isn't worth worrying
about, given the relative compactness of the new List representation.
(Note that in cases where such leakage would happen, the old code
already leaked the second List's header; so we're only discussing
the size of the leak not whether there is one. I did adjust two or
three places that had been troubling to free that header so that
they manually free the whole second List.)
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Formerly, lcons was about the same speed as lappend, but with the new
List implementation, that's not so; with a long List, data movement
imposes an O(N) cost on lcons and list_delete_first, but not lappend.
Hence, invent list_delete_last with semantics parallel to
list_delete_first (but O(1) cost), and change various places to use
lappend and list_delete_last where this can be done without much
violence to the code logic.
There are quite a few places that construct result lists using lcons not
lappend. Some have semantic rationales for that; I added comments about
it to a couple that didn't have them already. In many such places though,
I think the coding is that way only because back in the dark ages lcons
was faster than lappend. Hence, switch to lappend where this can be done
without causing semantic changes.
In ExecInitExprRec(), this results in aggregates and window functions that
are in the same plan node being executed in a different order than before.
Generally, the executions of such functions ought to be independent of
each other, so this shouldn't result in visibly different query results.
But if you push it, as one regression test case does, you can show that
the order is different. The new order seems saner; it's closer to
the order of the functions in the query text. And we never documented
or promised anything about this, anyway.
Also, in gistfinishsplit(), don't bother building a reverse-order list;
it's easy now to iterate backwards through the original list.
It'd be possible to go further towards removing uses of lcons and
list_delete_first, but it'd require more extensive logic changes,
and I'm not convinced it's worth it. Most of the remaining uses
deal with queues that probably never get long enough to be worth
sweating over. (Actually, I doubt that any of the changes in this
patch will have measurable performance effects either. But better
to have good examples than bad ones in the code base.)
Patch by me, thanks to David Rowley and Daniel Gustafsson for review.
Discussion: https://postgr.es/m/21272.1563318411@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Originally, Postgres Lists were a more or less exact reimplementation of
Lisp lists, which consist of chains of separately-allocated cons cells,
each having a value and a next-cell link. We'd hacked that once before
(commit d0b4399d8) to add a separate List header, but the data was still
in cons cells. That makes some operations -- notably list_nth() -- O(N),
and it's bulky because of the next-cell pointers and per-cell palloc
overhead, and it's very cache-unfriendly if the cons cells end up
scattered around rather than being adjacent.
In this rewrite, we still have List headers, but the data is in a
resizable array of values, with no next-cell links. Now we need at
most two palloc's per List, and often only one, since we can allocate
some values in the same palloc call as the List header. (Of course,
extending an existing List may require repalloc's to enlarge the array.
But this involves just O(log N) allocations not O(N).)
Of course this is not without downsides. The key difficulty is that
addition or deletion of a list entry may now cause other entries to
move, which it did not before.
For example, that breaks foreach() and sister macros, which historically
used a pointer to the current cons-cell as loop state. We can repair
those macros transparently by making their actual loop state be an
integer list index; the exposed "ListCell *" pointer is no longer state
carried across loop iterations, but is just a derived value. (In
practice, modern compilers can optimize things back to having just one
loop state value, at least for simple cases with inline loop bodies.)
In principle, this is a semantics change for cases where the loop body
inserts or deletes list entries ahead of the current loop index; but
I found no such cases in the Postgres code.
The change is not at all transparent for code that doesn't use foreach()
but chases lists "by hand" using lnext(). The largest share of such
code in the backend is in loops that were maintaining "prev" and "next"
variables in addition to the current-cell pointer, in order to delete
list cells efficiently using list_delete_cell(). However, we no longer
need a previous-cell pointer to delete a list cell efficiently. Keeping
a next-cell pointer doesn't work, as explained above, but we can improve
matters by changing such code to use a regular foreach() loop and then
using the new macro foreach_delete_current() to delete the current cell.
(This macro knows how to update the associated foreach loop's state so
that no cells will be missed in the traversal.)
There remains a nontrivial risk of code assuming that a ListCell *
pointer will remain good over an operation that could now move the list
contents. To help catch such errors, list.c can be compiled with a new
define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents
whenever that could possibly happen. This makes list operations
significantly more expensive so it's not normally turned on (though it
is on by default if USE_VALGRIND is on).
There are two notable API differences from the previous code:
* lnext() now requires the List's header pointer in addition to the
current cell's address.
* list_delete_cell() no longer requires a previous-cell argument.
These changes are somewhat unfortunate, but on the other hand code using
either function needs inspection to see if it is assuming anything
it shouldn't, so it's not all bad.
Programmers should be aware of these significant performance changes:
* list_nth() and related functions are now O(1); so there's no
major access-speed difference between a list and an array.
* Inserting or deleting a list element now takes time proportional to
the distance to the end of the list, due to moving the array elements.
(However, it typically *doesn't* require palloc or pfree, so except in
long lists it's probably still faster than before.) Notably, lcons()
used to be about the same cost as lappend(), but that's no longer true
if the list is long. Code that uses lcons() and list_delete_first()
to maintain a stack might usefully be rewritten to push and pop at the
end of the list rather than the beginning.
* There are now list_insert_nth...() and list_delete_nth...() functions
that add or remove a list cell identified by index. These have the
data-movement penalty explained above, but there's no search penalty.
* list_concat() and variants now copy the second list's data into
storage belonging to the first list, so there is no longer any
sharing of cells between the input lists. The second argument is
now declared "const List *" to reflect that it isn't changed.
This patch just does the minimum needed to get the new implementation
in place and fix bugs exposed by the regression tests. As suggested
by the foregoing, there's a fair amount of followup work remaining to
do.
Also, the ENABLE_LIST_COMPAT macros are finally removed in this
commit. Code using those should have been gone a dozen years ago.
Patch by me; thanks to David Rowley, Jesper Pedersen, and others
for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 3ca930fc3 modified get_actual_variable_range() to use a new
"SnapshotNonVacuumable" snapshot type for selecting tuples that it
would consider valid. However, because that snapshot type can accept
recently-dead tuples, this caused a bug when using a recently-created
index: we might accept a recently-dead tuple that is an early member
of a broken HOT chain and does not actually match the index entry.
Then, the data extracted from the heap tuple would not necessarily be
an endpoint value of the column; it could even be NULL, leading to
get_actual_variable_range() itself reporting "found unexpected null
value in index". Even without an error, this could lead to poor
plan choices due to an erroneous notion of the endpoint value.
We can improve matters by changing the code to use the index-only
scan technique (which didn't exist when get_actual_variable_range was
originally written). If any of the tuples in a HOT chain are live
enough to satisfy SnapshotNonVacuumable, we take the data from the
index entry, ignoring what is in the heap. This fixes the problem
without changing the live-vs-dead-tuple behavior from what was
intended by commit 3ca930fc3.
A side benefit is that for static tables we might not have to touch
the heap at all (when the extremal value is in an all-visible page).
In addition, we can save some overhead by not having to create a
complete ExecutorState, and we don't need to run FormIndexDatum,
avoiding more cycles as well as the possibility of failure for
indexes on expressions. (I'm not sure that this code would ever
be used to determine the extreme value of an expression, in the
current state of the planner; but it's definitely possible that
lower-order columns of the selected index could be expressions.
So one could construct perhaps-artificial examples in which the
old code unexpectedly failed due to trying to compute an
expression's value for a now-dead row.)
Per report from Manuel Rigger. Back-patch to v11 where commit
3ca930fc3 came in.
Discussion: https://postgr.es/m/CA+u7OA7W4NWEhCvftdV6_8bbm2vgypi5nuxfnSEJQqVKFSUoMg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
| |
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In examine_variable() and examine_simple_variable(), when checking the
user's table and column privileges to determine whether to grant
access to the pg_statistic data, use checkAsUser for the privilege
checks, if it's set. This will be the case if we're accessing the
table via a view, to indicate that we should perform privilege checks
as the view owner rather than the current user.
This change makes this planner check consistent with the check in the
executor, so the planner will be able to make use of statistics if the
table is accessible via the view. This fixes a performance regression
introduced by commit e2d4ef8de8, which affects queries against
non-security barrier views in the case where the user doesn't have
privileges on the underlying table, but the view owner does.
Note that it continues to provide the same safeguards controlling
access to pg_statistic for direct table access (in which case
checkAsUser won't be set) and for security barrier views, because of
the nearby checks on rte->security_barrier and rte->securityQuals.
Back-patch to all supported branches because e2d4ef8de8 was.
Dean Rasheed, reviewed by Jonathan Katz and Stephen Frost.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit e2d4ef8de8, security checks were added to prevent
user-supplied operators from running over data from pg_statistic
unless the user has table or column privileges on the table, or the
operator is leakproof. For a table with RLS, however, checking for
table or column privileges is insufficient, since that does not
guarantee that the user has permission to view all of the column's
data.
Fix this by also checking for securityQuals on the RTE, and insisting
that the operator be leakproof if there are any. Thus the
leakproofness check will only be skipped if there are no securityQuals
and the user has table or column privileges on the table -- i.e., only
if we know that the user has access to all the data in the column.
Back-patch to 9.5 where RLS was added.
Dean Rasheed, reviewed by Jonathan Katz and Stephen Frost.
Security: CVE-2019-10130
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The assertions added by commit b04aeb0a0 exposed that there are some
code paths wherein the executor will try to open an index without
holding any lock on it. We do have some lock on the index's table,
so it seems likely that there's no fatal problem with this (for
instance, the index couldn't get dropped from under us). Still,
it's bad practice and we should fix it.
To do so, remove the optimizations in ExecInitIndexScan and friends
that tried to avoid taking a lock on an index belonging to a target
relation, and just take the lock always. In non-bug cases, this
will result in no additional shared-memory access, since we'll find
in the local lock table that we already have a lock of the desired
type; hence, no significant performance degradation should occur.
Also, adjust the planner and executor so that the type of lock taken
on an index is always identical to the type of lock taken for its table,
by relying on the recently added RangeTblEntry.rellockmode field.
This avoids some corner cases where that might not have been true
before (possibly resulting in extra locking overhead), and prevents
future maintenance issues from having multiple bits of logic that
all needed to be in sync. In addition, this change removes all core
calls to ExecRelationIsTargetRelation, which avoids a possible O(N^2)
startup penalty for queries with large numbers of target relations.
(We'd probably remove that function altogether, were it not that we
advertise it as something that FDWs might want to use.)
Also adjust some places in selfuncs.c to not take any lock on indexes
they are transiently opening, since we can assume that plancat.c
did that already.
In passing, change gin_clean_pending_list() to take RowExclusiveLock
not AccessShareLock on its target index. Although it's not clear that
that's actually a bug, it seemed very strange for a function that's
explicitly going to modify the index to use only AccessShareLock.
David Rowley, reviewed by Julien Rouhaud and Amit Langote,
a bit of further tweaking by me
Discussion: https://postgr.es/m/19465.1541636036@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We were getting just DEFAULT_INEQ_SEL for comparisons such as
"ctid >= constant", but it's possible to do a lot better if we don't
mind some assumptions about the table's tuple density being reasonably
uniform. There are already assumptions much like that elsewhere in
the planner, so that hardly seems like much of an objection.
Extracted from a patch set that also proposes to introduce a special
executor node type for such queries. Not sure if that's going to make
it into v12, but improving the selectivity estimate is useful
independently of that.
Edmund Horner, reviewed by David Rowley
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
|
