| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Coverity complained about the lack of a check on the return value in
parse_jsonb_index_flags' last call of JsonbIteratorNext. Seems like
a reasonable gripe to me, especially since the code is depending on
that being WJB_DONE to not leak memory, so add a check.
In passing, improve a couple other places where the result was being
ignored, either by adding an assert or at least a cast to void.
Also, don't spell "WJB_DONE" as "0". That's horrid coding style,
and it wasn't consistent either.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There's been a massive addition of partitioning code in PostgreSQL 11,
with little oversight on its placement, resulting in a
catalog/partition.c with poorly defined boundaries and responsibilities.
This commit tries to set a couple of distinct modules to separate things
a little bit. There are no code changes here, only code movement.
There are three new files:
src/backend/utils/cache/partcache.c
src/include/partitioning/partdefs.h
src/include/utils/partcache.h
The previous arrangement of #including catalog/partition.h almost
everywhere is no more.
Authors: Amit Langote and Álvaro Herrera
Discussion: https://postgr.es/m/98e8d509-790a-128c-be7f-e48a5b2d8d97@lab.ntt.co.jp
https://postgr.es/m/11aa0c50-316b-18bb-722d-c23814f39059@lab.ntt.co.jp
https://postgr.es/m/143ed9a4-6038-76d4-9a55-502035815e68@lab.ntt.co.jp
https://postgr.es/m/20180413193503.nynq7bnmgh6vs5vm@alvherre.pgsql
|
| |
|
|
|
|
|
|
|
|
|
| |
- Explicitly forbids opclass, collation and indoptions (like DESC/ASC etc) for
including columns. Throw an error if user points that.
- Truncated storage arrays for such attributes to store only key atrributes,
added assertion checks.
- Do not check opfamily and collation for including columns in
CompareIndexInfo()
Discussion: https://www.postgresql.org/message-id/5ee72852-3c4e-ee35-e2ed-c1d053d45c08@sigaev.ru
|
| |
|
|
|
|
|
| |
This rectifies an oversight in commit 8224de4f4, by adding a new
property 'can_include' for pg_indexam_has_property, and adjusting the
results of pg_index_column_has_property to give more appropriate
results for INCLUDEd columns.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Jsonb has a complex nature so there isn't best-for-everything way to convert it
to tsvector for full text search. Current to_tsvector(json(b)) suggests to
convert only string values, but it's possible to index keys, numerics and even
booleans value. To solve that json(b)_to_tsvector has a second required
argument contained a list of desired types of json fields. Second argument is
a jsonb scalar or array right now with possibility to add new options in a
future.
Bump catalog version
Author: Dmitry Dolgov with some editorization by me
Reviewed by: Teodor Sigaev
Discussion: https://www.postgresql.org/message-id/CA+q6zcXJQbS1b4kJ_HeAOoOc=unfnOrUEL=KGgE32QKDww7d8g@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This provides a newer version of adminpack which works with the newly
added default roles to support GRANT'ing to non-superusers access to
read and write files, along with related functions (unlinking files,
getting file length, renaming/removing files, scanning the log file
directory) which are supported through adminpack.
Note that new versions of the functions are required because an
environment might have an updated version of the library but still have
the old adminpack 1.0 catalog definitions (where EXECUTE is GRANT'd to
PUBLIC for the functions).
This patch also removes the long-deprecated alternative names for
functions that adminpack used to include and which are now included in
the backend, in adminpack v1.1. Applications using the deprecated names
should be updated to use the backend functions instead. Existing
installations which continue to use adminpack v1.0 should continue to
function until/unless adminpack is upgraded.
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20171231191939.GR2416%40tamriel.snowman.net
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds new default roles named 'pg_read_server_files',
'pg_write_server_files', 'pg_execute_server_program' which
allow an administrator to GRANT to a non-superuser role the ability to
access server-side files or run programs through PostgreSQL (as the user
the database is running as). Having one of these roles allows a
non-superuser to use server-side COPY to read, write, or with a program,
and to use file_fdw (if installed by a superuser and GRANT'd USAGE on
it) to read from files or run a program.
The existing misc file functions are also changed to allow a user with
the 'pg_read_server_files' default role to read any files on the
filesystem, matching the privileges given to that role through COPY and
file_fdw from above.
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20171231191939.GR2416%40tamriel.snowman.net
|
| |
|
|
|
|
|
|
|
|
|
| |
This removes the explicit superuser checks in the various file-access
functions in the backend, specifically pg_ls_dir(), pg_read_file(),
pg_read_binary_file(), and pg_stat_file(). Instead, EXECUTE is REVOKE'd
from public for these, meaning that only a superuser is able to run them
by default, but access to them can be GRANT'd to other roles.
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20171231191939.GR2416%40tamriel.snowman.net
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Error-tolerant conversion function with web-like syntax for search query,
it simplifies constraining search engine with close to habitual interface for
users.
Bump catalog version
Authors: Victor Drobny, Dmitry Ivanov with editorization by me
Reviewed by: Aleksander Alekseev, Tomas Vondra, Thomas Munro, Aleksandr Parfenov
Discussion: https://www.postgresql.org/message-id/flat/fe931111ff7e9ad79196486ada79e268@postgrespro.ru
|
| |
|
|
|
|
|
|
|
| |
This is a blind fix, since I don't have SE-Linux to verify it.
Per unwanted change in rhinoceros, running sepgsql tests. Noted by Tom
Lane.
Discussion: https://postgr.es/m/32347.1522865050@sss.pgh.pa.us
|
| |
|
|
|
|
| |
Author: Álvaro Herrera
Discussion: https://postgr.es/m/20171231194359.cvojcour423ulha4@alvherre.pgsql
Reviewed-by: Peter Eisentraut
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Previous coding was passing the wrong table's tuple descriptor, which
accidentally fails to fail because no existing test case exercises a
foreign key in which the referenced attributes are further to the right
of the referencing attributes.
Add a test so that further breakage is visible.
This got broken in 16828d5c0273.
Discussion: https://postgr.es/m/20180403204723.fqte755nukgm42uf@alvherre.pgsql
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The prefix operator along with SP-GiST indexes can be used as an alternative
for LIKE 'word%' commands and it doesn't have a limitation of string/prefix
length as B-Tree has.
Bump catalog version
Author: Ildus Kurbangaliev with some editorization by me
Review by: Arthur Zakirov, Alexander Korotkov, and me
Discussion: https://www.postgresql.org/message-id/flat/20180202180327.222b04b3@wp.localdomain
|
| |
|
|
|
|
| |
Justin Pryzby
Discussion: https://postgr.es/m/20180331105640.GK28454@telsasoft.com
|
| |
|
|
|
|
|
|
| |
Reported-by: Michael Paquier, Abhijit Menon-Sen
Discussion: https://postgr.es/m/20180305045854.GB2266@paquier.xyz
Author: Michael Paquier, Abhijit Menon-Sen, me
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Add explicit cast from scalar jsonb to all numeric and bool types. It would be
better to have cast from scalar jsonb to text too but there is already a cast
from jsonb to text as just text representation of json. There is no way to have
two different casts for the same type's pair.
Bump catalog version
Author: Anastasia Lubennikova with editorization by Nikita Glukhov and me
Review by: Aleksander Alekseev, Nikita Glukhov, Darafei Praliaskouski
Discussion: https://www.postgresql.org/message-id/flat/0154d35a-24ae-f063-5273-9ffcdf1c7f2e@postgrespro.ru
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
tuplesort_gettupleslot() passed back tuples allocated in the tuplesort's
own memory context, even when the caller was responsible to free them.
This created a double-free hazard, because some callers might destroy
the tuplesort object (via tuplesort_end) before trying to clean up the
last returned tuple. To avoid this, change the API to specify that the
tuple is allocated in the caller's memory context. v10 and HEAD already
did things that way, but in 9.5 and 9.6 this is a live bug that can
demonstrably cause crashes with some grouping-set usages.
In 9.5 and 9.6, this requires doing an extra tuple copy in some cases,
which is unfortunate. But the amount of refactoring needed to avoid it
seems excessive for a back-patched change, especially since the cases
where an extra copy happens are less performance-critical.
Likewise change tuplesort_getdatum() to return pass-by-reference Datums
in the caller's context not the tuplesort's context. There seem to be
no live bugs among its callers, but clearly the same sort of situation
could happen in future.
For other tuplesort fetch routines, continue to allocate the memory in
the tuplesort's context. This is a little inconsistent with what we now
do for tuplesort_gettupleslot() and tuplesort_getdatum(), but that's
preferable to adding new copy overhead in the back branches where it's
clearly unnecessary. These other fetch routines provide the weakest
possible guarantees about tuple memory lifespan from v10 on, anyway,
so this actually seems more consistent overall.
Adjust relevant comments to reflect these API redefinitions.
Arguably, we should change the pre-9.5 branches as well, but since
there are no known failure cases there, it seems not worth the risk.
Peter Geoghegan, per report from Bernd Helmle. Reviewed by Kyotaro
Horiguchi; thanks also to Andreas Seltenreich for extracting a
self-contained test case.
Discussion: https://postgr.es/m/1512661638.9720.34.camel@oopsware.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently adding a column to a table with a non-NULL default results in
a rewrite of the table. For large tables this can be both expensive and
disruptive. This patch removes the need for the rewrite as long as the
default value is not volatile. The default expression is evaluated at
the time of the ALTER TABLE and the result stored in a new column
(attmissingval) in pg_attribute, and a new column (atthasmissing) is set
to true. Any existing row when fetched will be supplied with the
attmissingval. New rows will have the supplied value or the default and
so will never need the attmissingval.
Any time the table is rewritten all the atthasmissing and attmissingval
settings for the attributes are cleared, as they are no longer needed.
The most visible code change from this is in heap_attisnull, which
acquires a third TupleDesc argument, allowing it to detect a missing
value if there is one. In many cases where it is known that there will
not be any (e.g. catalog relations) NULL can be passed for this
argument.
Andrew Dunstan, heavily modified from an original patch from Serge
Rielau.
Reviewed by Tom Lane, Andres Freund, Tomas Vondra and David Rowley.
Discussion: https://postgr.es/m/31e2e921-7002-4c27-59f5-51f08404c858@2ndQuadrant.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Using the standard bool type provided by C allows some recent compilers
and debuggers to give better diagnostics. Also, some extension code and
third-party headers are increasingly pulling in stdbool.h, so it's
probably saner if everyone uses the same definition.
But PostgreSQL code is not prepared to handle bool of a size other than
1, so we keep our own old definition if we encounter a stdbool.h with a
bool of a different size. (Among current build farm members, this only
applies to old macOS versions on PowerPC.)
To check that the used bool is of the right size, add a static
assertions about size of GinTernaryValue vs bool. This is currently the
only place that assumes that bool and char are of the same size.
Discussion: https://www.postgresql.org/message-id/flat/3a0fe7e1-5ed1-414b-9230-53bbc0ed1f49@2ndquadrant.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Code that prints out the contents of setconfig or proconfig arrays in
SQL format needs to handle GUC_LIST_QUOTE variables differently from
other ones, because for those variables, flatten_set_variable_args()
already applied a layer of quoting. The value can therefore safely
be printed as-is, and indeed must be, or flatten_set_variable_args()
will muck it up completely on reload. For all other GUC variables,
it's necessary and sufficient to quote the value as a SQL literal.
We'd recognized the need for this long ago, but mis-analyzed the
need slightly, thinking that all GUC_LIST_INPUT variables needed
the special treatment. That's actually wrong, since a valid value
of a LIST variable might include characters that need quoting,
although no existing variables accept such values.
More to the point, we hadn't made any particular effort to keep the
various places that deal with this up-to-date with the set of variables
that actually need special treatment, meaning that we'd do the wrong
thing with, for example, temp_tablespaces values. This affects dumping
of SET clauses attached to functions, as well as ALTER DATABASE/ROLE SET
commands.
In ruleutils.c we can fix it reasonably honestly by exporting a guc.c
function that allows discovering the flags for a given GUC variable.
But pg_dump doesn't have easy access to that, so continue the old method
of having a hard-wired list of affected variable names. At least we can
fix it to have just one list not two, and update the list to match
current reality.
A remaining problem with this is that it only works for built-in
GUC variables. pg_dump's list obvious knows nothing of third-party
extensions, and even the "ask guc.c" method isn't bulletproof since
the relevant extension might not be loaded. There's no obvious
solution to that, so for now, we'll just have to discourage extension
authors from inventing custom GUCs that need GUC_LIST_QUOTE.
This has been busted for a long time, so back-patch to all supported
branches.
Michael Paquier and Tom Lane, reviewed by Kyotaro Horiguchi and
Pavel Stehule
Discussion: https://postgr.es/m/20180111064900.GA51030@paquier.xyz
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
refresh_by_match_merge() has some issues in the way it builds a SQL
query to construct the "diff" table:
1. It doesn't require the selected unique index(es) to be indimmediate.
2. It doesn't pay attention to the particular equality semantics enforced
by a given index, but just assumes that they must be those of the column
datatype's default btree opclass.
3. It doesn't check that the indexes are btrees.
4. It's insufficiently careful to ensure that the parser will pick the
intended operator when parsing the query. (This would have been a
security bug before CVE-2018-1058.)
5. It's not careful about indexes on system columns.
The way to fix #4 is to make use of the existing code in ri_triggers.c
for generating an arbitrary binary operator clause. I chose to move
that to ruleutils.c, since that seems a more reasonable place to be
exporting such functionality from than ri_triggers.c.
While #1, #3, and #5 are just latent given existing feature restrictions,
and #2 doesn't arise in the core system for lack of alternate opclasses
with different equality behaviors, #4 seems like an issue worth
back-patching. That's the bulk of the change anyway, so just back-patch
the whole thing to 9.4 where this code was introduced.
Discussion: https://postgr.es/m/13836.1521413227@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix the warnings created by the compiler warning options
-Wformat-overflow=2 -Wformat-truncation=2, supported since GCC 7. This
is a more aggressive variant of the fixes in
6275f5d28a1577563f53f2171689d4f890a46881, which GCC 7 warned about by
default.
The issues are all harmless, but some dubious coding patterns are
cleaned up.
One issue that is of external interest is that BGW_MAXLEN is increased
from 64 to 96. Apparently, the old value would cause the bgw_name of
logical replication workers to be truncated in some circumstances.
But this doesn't actually add those warning options. It appears that
the warnings depend a bit on compilation and optimization options, so it
would be annoying to have to keep up with that. This is more of a
once-in-a-while cleanup.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
|
| |
|
|
|
|
|
| |
Several places used similar code to convert a string to an int, so take
the function that we already had and make it globally available.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If convert_to_scalar is passed a pair of datatypes it can't cope with,
its former behavior was just to elog(ERROR). While this is OK so far as
the core code is concerned, there's extension code that would like to use
scalarltsel/scalargtsel/etc as selectivity estimators for operators that
work on non-core datatypes, and this behavior is a show-stopper for that
use-case. If we simply allow convert_to_scalar to return FALSE instead of
outright failing, then the main logic of scalarltsel/scalargtsel will work
fine for any operator that behaves like a scalar inequality comparison.
The lack of conversion capability will mean that we can't estimate to
better than histogram-bin-width precision, since the code will effectively
assume that the comparison constant falls at the middle of its bin. But
that's still a lot better than nothing. (Someday we should provide a way
for extension code to supply a custom version of convert_to_scalar, but
today is not that day.)
While poking at this issue, we noted that the existing code for handling
type bytea in convert_to_scalar is several bricks shy of a load.
It assumes without checking that if the comparison value is type bytea,
the bounds values are too; in the worst case this could lead to a crash.
It also fails to detoast the input values, so that the comparison result is
complete garbage if any input is toasted out-of-line, compressed, or even
just short-header. I'm not sure how often such cases actually occur ---
the bounds values, at least, are probably safe since they are elements of
an array and hence can't be toasted. But that doesn't make this code OK.
Back-patch to all supported branches, partly because author requested that,
but mostly because of the bytea bugs. The change in API for the exposed
routine convert_network_to_scalar() is theoretically a back-patch hazard,
but it seems pretty unlikely that any third-party code is calling that
function directly.
Tomas Vondra, with some adjustments by me
Discussion: https://postgr.es/m/b68441b6-d18f-13ab-b43b-9a72188a4e02@2ndquadrant.com
|
| |
|
|
|
|
|
|
|
|
| |
The new column distinguishes normal functions, procedures, aggregates,
and window functions. This replaces the existing columns proisagg and
proiswindow, and replaces the convention that procedures are indicated
by prorettype == 0. Also change prorettype to be VOIDOID for procedures.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit a26116c6c accidentally changed the behavior of the SQL format_type()
function while refactoring. For the reasons explained in that function's
comment, a NULL typemod argument should behave differently from a -1
argument. Since we've managed to break this, add a regression test
memorializing the intended behavior.
In passing, be consistent about the type of the "flags" parameter.
Noted by Rushabh Lathia, though I revised the patch some more.
Discussion: https://postgr.es/m/CAGPqQf3RB2q-d2Awp_-x-Ur6aOxTUwnApt-vm-iTtceZxYnePg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Solaris 11.4 has built-in functions named b64_encode and b64_decode.
Rename ours to something else to avoid the conflict (fortunately,
ours are static so the impact is limited).
One could wish for less duplication of code in this area, but that
would be a larger patch and not very suitable for back-patching.
Since this is a portability fix, we want to put it into all supported
branches.
Report and initial patch by Rainer Orth, reviewed and adjusted a bit
by Michael Paquier
Discussion: https://postgr.es/m/ydd372wk28h.fsf@CeBiTec.Uni-Bielefeld.DE
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Historically, pg_dump has "set search_path = foo, pg_catalog" when
dumping an object in schema "foo", and has also caused that setting
to be used while restoring the object. This is problematic because
functions and operators in schema "foo" could capture references meant
to refer to pg_catalog entries, both in the queries issued by pg_dump
and those issued during the subsequent restore run. That could
result in dump/restore misbehavior, or in privilege escalation if a
nefarious user installs trojan-horse functions or operators.
This patch changes pg_dump so that it does not change the search_path
dynamically. The emitted restore script sets the search_path to what
was used at dump time, and then leaves it alone thereafter. Created
objects are placed in the correct schema, regardless of the active
search_path, by dint of schema-qualifying their names in the CREATE
commands, as well as in subsequent ALTER and ALTER-like commands.
Since this change requires a change in the behavior of pg_restore
when processing an archive file made according to this new convention,
bump the archive file version number; old versions of pg_restore will
therefore refuse to process files made with new versions of pg_dump.
Security: CVE-2018-1058
|
| |
|
|
|
| |
I forgot the coding rule for correct use of Float8GetDatumFast.
Per buildfarm.
|
| |
|
|
|
|
|
|
| |
Commit 0a459cec9 left this for later, but since time's running out,
I went ahead and took care of it. There are more data types that
somebody might someday want RANGE support for, but this is enough
to satisfy all expectations of the SQL standard, which just says that
"numeric, datetime, and interval" types should have RANGE support.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add the user-callable functions sha224, sha256, sha384, sha512. We
already had these in the C code to support SCRAM, but there was no test
coverage outside of the SCRAM tests. Adding these as user-callable
functions allows writing some tests. Also, we have a user-callable md5
function but no more modern alternative, which led to wide use of md5 as
a general-purpose hash function, which leads to occasional complaints
about using md5.
Also mark the existing md5 functions as leak-proof.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
|
| |
|
|
|
|
|
|
|
| |
While this is not illegal C, project style is to put "extern" only on
declarations not definitions.
David Rowley
Discussion: https://postgr.es/m/CAKJS1f9RKLWXcMBQhvDYhmsMEo+ALuNgA-NE+AX5Uoke9DJ2Xg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Introduce a new format_type_extended, with a flags bitmask argument that
can modify the default behavior. A few compatibility and readability
wrappers remain:
format_type_be
format_type_be_qualified
format_type_with_typemod
while format_type_with_typemod_qualified, which had a single caller, is
removed.
Author: Michael Paquier, some revisions by me
Discussion: 20180213035107.GA2915@paquier.xyz
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This has a performance benefit on own, although not hugely so. The
primary benefit is that it will allow for to JIT tuple deforming and
comparator invocations.
Large parts of this were previously committed (773aec7aa), but the
commit contained an omission around cross-type comparisons and was
thus reverted.
Author: Andres Freund
Discussion: https://postgr.es/m/20171129080934.amqqkke2zjtekd4t@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit 773aec7aa98abd38d6d9435913bb8e14e392c274.
There's an unresolved issue in the reverted commit: It only creates
one comparator function, but in for the nodeSubplan.c case we need
more (c.f. FindTupleHashEntry vs LookupTupleHashEntry calls in
nodeSubplan.c).
This isn't too difficult to fix, but it's not entirely trivial
either. The fact that the issue only causes breakage on 32bit systems
shows that the current test coverage isn't that great. To avoid
turning half the buildfarm red till those two issues are addressed,
revert.
|
| |
|
|
|
|
|
|
|
| |
This has a performance benefit on own, although not hugely so. The
primary benefit is that it will allow for to JIT tuple deforming and
comparator invocations.
Author: Andres Freund
Discussion: https://postgr.es/m/20171129080934.amqqkke2zjtekd4t@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Formerly, DTYPE_REC was used only for variables declared as "record";
variables of named composite types used DTYPE_ROW, which is faster for
some purposes but much less flexible. In particular, the ROW code paths
are entirely incapable of dealing with DDL-caused changes to the number
or data types of the columns of a row variable, once a particular plpgsql
function has been parsed for the first time in a session. And, since the
stored representation of a ROW isn't a tuple, there wasn't any easy way
to deal with variables of domain-over-composite types, since the domain
constraint checking code would expect the value to be checked to be a
tuple. A lesser, but still real, annoyance is that ROW format cannot
represent a true NULL composite value, only a row of per-field NULL
values, which is not exactly the same thing.
Hence, switch to using DTYPE_REC for all composite-typed variables,
whether "record", named composite type, or domain over named composite
type. DTYPE_ROW remains but is used only for its native purpose, to
represent a fixed-at-compile-time list of variables, for instance the
targets of an INTO clause.
To accomplish this without taking significant performance losses, introduce
infrastructure that allows storing composite-type variables as "expanded
objects", similar to the "expanded array" infrastructure introduced in
commit 1dc5ebc90. A composite variable's value is thereby kept (most of
the time) in the form of separate Datums, so that field accesses and
updates are not much more expensive than they were in the ROW format.
This holds the line, more or less, on performance of variables of named
composite types in field-access-intensive microbenchmarks, and makes
variables declared "record" perform much better than before in similar
tests. In addition, the logic involved with enforcing composite-domain
constraints against updates of individual fields is in the expanded
record infrastructure not plpgsql proper, so that it might be reusable
for other purposes.
In further support of this, introduce a typcache feature for assigning a
unique-within-process identifier to each distinct tuple descriptor of
interest; in particular, DDL alterations on composite types result in a new
identifier for that type. This allows very cheap detection of the need to
refresh tupdesc-dependent data. This improves on the "tupDescSeqNo" idea
I had in commit 687f096ea: that assigned identifying sequence numbers to
successive versions of individual composite types, but the numbers were not
unique across different types, nor was there support for assigning numbers
to registered record types.
In passing, allow plpgsql functions to accept as well as return type
"record". There was no good reason for the old restriction, and it
was out of step with most of the other PLs.
Tom Lane, reviewed by Pavel Stehule
Discussion: https://postgr.es/m/8962.1514399547@sss.pgh.pa.us
|
| |
|
|
|
|
| |
This also makes procedures work in psql's \ef and \sf commands.
Reported-by: Pavel Stehule <pavel.stehule@gmail.com>
|
| |
|
|
|
|
|
|
|
| |
The modern way is to use a missing_ok argument instead of two separate
almost-identical routines, so do that.
Author: Michaël Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20180201063212.GE6398@paquier.xyz
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds the ability to use "RANGE offset PRECEDING/FOLLOWING"
frame boundaries in window functions. We'd punted on that back in the
original patch to add window functions, because it was not clear how to
do it in a reasonably data-type-extensible fashion. That problem is
resolved here by adding the ability for btree operator classes to provide
an "in_range" support function that defines how to add or subtract the
RANGE offset value. Factoring it this way also allows the operator class
to avoid overflow problems near the ends of the datatype's range, if it
wishes to expend effort on that. (In the committed patch, the integer
opclasses handle that issue, but it did not seem worth the trouble to
avoid overflow failures for datetime types.)
The patch includes in_range support for the integer_ops opfamily
(int2/int4/int8) as well as the standard datetime types. Support for
other numeric types has been requested, but that seems like suitable
material for a follow-on patch.
In addition, the patch adds GROUPS mode which counts the offset in
ORDER-BY peer groups rather than rows, and it adds the frame_exclusion
options specified by SQL:2011. As far as I can see, we are now fully
up to spec on window framing options.
Existing behaviors remain unchanged, except that I changed the errcode
for a couple of existing error reports to meet the SQL spec's expectation
that negative "offset" values should be reported as SQLSTATE 22013.
Internally and in relevant parts of the documentation, we now consistently
use the terminology "offset PRECEDING/FOLLOWING" rather than "value
PRECEDING/FOLLOWING", since the term "value" is confusingly vague.
Oliver Ford, reviewed and whacked around some by me
Discussion: https://postgr.es/m/CAGMVOdu9sivPAxbNN0X+q19Sfv9edEPv=HibOJhB14TJv_RCQg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Discussion: http://postgr.es/m/CAM3SWZQKM=Pzc=CAHzRixKjp2eO5Q0Jg1SoFQqeXFQ647JiwqQ@mail.gmail.com
Discussion: http://postgr.es/m/CAH2-Wz=AxWqDoVvGU7dq856S4r6sJAj6DBn7VMtigkB33N5eyg@mail.gmail.com
|
| | |
|
| |
|
|
|
|
|
|
| |
These were introduced in 4cbb646334b3b998a29abef0d57608d42097e6c9, but
after further analysis and testing, they should not be necessary and
probably weren't the part of that commit that fixed anything.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
|
| |
|
|
|
|
|
|
|
| |
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There used to be a lot of different *Type and *Kind symbol groups to
address objects within different commands, most of which have been
replaced by ObjectType, starting with
b256f2426433c56b4bea3a8102757749885b81ba. But this conversion was never
done for the ACL commands until now.
This change ends up being just a plain replacement of the types and
symbols, without any code restructuring needed, except deleting some now
redundant code.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Stephen Frost <sfrost@snowman.net>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When CREATE INDEX is run on a partitioned table, create catalog entries
for an index on the partitioned table (which is just a placeholder since
the table proper has no data of its own), and recurse to create actual
indexes on the existing partitions; create them in future partitions
also.
As a convenience gadget, if the new index definition matches some
existing index in partitions, these are picked up and used instead of
creating new ones. Whichever way these indexes come about, they become
attached to the index on the parent table and are dropped alongside it,
and cannot be dropped on isolation unless they are detached first.
To support pg_dump'ing these indexes, add commands
CREATE INDEX ON ONLY <table>
(which creates the index on the parent partitioned table, without
recursing) and
ALTER INDEX ATTACH PARTITION
(which is used after the indexes have been created individually on each
partition, to attach them to the parent index). These reconstruct prior
database state exactly.
Reviewed-by: (in alphabetical order) Peter Eisentraut, Robert Haas, Amit
Langote, Jesper Pedersen, Simon Riggs, David Rowley
Discussion: https://postgr.es/m/20171113170646.gzweigyrgg6pwsg4@alvherre.pgsql
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The creates a single function JsonEncodeDateTime which will format these
data types in an efficient and consistent manner. This will be all the
more important when we come to jsonpath so we don't have to implement yet
more code doing the same thing in two more places.
This also extends the code to handle time and timetz types which were
not previously handled specially. This requires exposing the time2tm and
timetz2tm functions.
Patch from Nikita Glukhov
|
| |
|
|
|
|
|
|
|
|
| |
In this case, the macros SET_8_BYTES(), GET_8_BYTES(), SET_4_BYTES(),
GET_4_BYTES() are no-ops, so we can just remove them.
The plan is to perhaps remove them from the source code altogether, so
we'll start here.
Discussion: https://www.postgresql.org/message-id/5d51721a-69ef-2053-9172-599b539f0628@2ndquadrant.com
|
| |
|
|
|
|
|
| |
These are compatible with Oracle and required for the datetime template
language for jsonpath in an upcoming patch.
Nikita Glukhov and Andrew Dunstan, reviewed by Pavel Stehule.
|
