| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
unnecessary cache resets. The major changes are:
* When the queue overflows, we only issue a cache reset to the specific
backend or backends that still haven't read the oldest message, rather
than resetting everyone as in the original coding.
* When we observe backend(s) falling well behind, we signal SIGUSR1
to only one backend, the one that is furthest behind and doesn't already
have a signal outstanding for it. When it finishes catching up, it will
in turn signal SIGUSR1 to the next-furthest-back guy, if there is one that
is far enough behind to justify a signal. The PMSIGNAL_WAKEN_CHILDREN
mechanism is removed.
* We don't attempt to clean out dead messages after every message-receipt
operation; rather, we do it on the insertion side, and only when the queue
fullness passes certain thresholds.
* Split SInvalLock into SInvalReadLock and SInvalWriteLock so that readers
don't block writers nor vice versa (except during the infrequent queue
cleanout operations).
* Transfer multiple sinval messages for each acquisition of a read or
write lock.
|
| |
|
|
|
|
|
| |
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
|
| |
|
|
|
|
|
|
|
|
|
| |
messages if the calling transaction aborts later on. Collapsing out line
pointer redirects is a done deal as soon as we complete the page update,
so syscache *must* be notified even if the VACUUM FULL as a whole doesn't
complete. To fix, add some functionality to inval.c to allow the pending
inval messages to be sent immediately while heap_page_prune is still
running. The implementation is a bit chintzy: it will only work in the
context of VACUUM FULL. But that's all we need now, and it can always be
extended later if needed. Per my trouble report of a week ago.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
| |
true at the very end of its processing, the update is broadcast via a
shared-cache-inval message for the index; without this, existing backends that
already have relcache entries for the index might never see it become valid.
Also, force a relcache inval on the index's parent table at the same time,
so that any cached plans for that table are re-planned; this ensures that
the newly valid index will be used if appropriate. Aside from making
C.I.C. behave more reasonably, this is necessary infrastructure for some
aspects of the HOT patch. Pavan Deolasee, with a little further stuff from
me.
|
| |
|
|
| |
back-stamped for this.
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
mean stress ... system is orders of magnitude slower with this enabled).
|
| |
|
|
|
|
|
|
|
| |
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
|
| | |
|
| |
|
|
| |
hacking by Alvaro Herrera and Tom Lane.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
indexes. Extend the macros in include/catalog/*.h to carry the info
about hand-assigned OIDs, and adjust the genbki script and bootstrap
code to make the relations actually get those OIDs. Remove the small
number of RelOid_pg_foo macros that we had in favor of a complete
set named like the catname.h and indexing.h macros. Next phase will
get rid of internal use of names for looking up catalogs and indexes;
but this completes the changes forcing an initdb, so it looks like a
good place to commit.
Along the way, I made the shared relations (pg_database etc) not be
'bootstrap' relations any more, so as to reduce the number of hardwired
entries and simplify changing those relations in future. I'm not
sure whether they ever really needed to be handled as bootstrap
relations, but it seems to work fine to not do so now.
|
| |
|
|
|
|
| |
so that we can get the size of a shared inval message back down to what it
was in 7.4 (and simplify the logic too). Phase 2 of fixing the
'SMgrRelation hashtable corrupted' problem.
|
| |
|
|
|
|
| |
is the minimum required fix. I want to look next at taking advantage of
it by simplifying the message semantics in the shared inval message queue,
but that part can be held over for 8.1 if it turns out too ugly.
|
| |
|
|
|
|
|
|
| |
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
|
| |
|
|
|
|
|
|
|
| |
Asserts would lead to a server core dump if an error occurred while
trying to abort a failed subtransaction (thereby leading to re-execution
of whatever parts of AbortSubTransaction had already run). This of course
does not prevent such an error from creating an infinite loop, but at
least we don't make the situation worse. Responds to an open item on
the subtransactions to-do list.
|
| | |
|
| | |
|
| |
|
|
|
|
|
| |
password/group files. Also allow read-only subtransactions of a read-write
parent, but not vice versa. These are the reasonably noncontroversial
parts of Alvaro's recent mop-up patch, plus further work on large objects
to minimize use of the TopTransactionResourceOwner.
|
| |
|
|
|
|
|
| |
performance front, but with feature freeze upon us I think it's time to
drive a stake in the ground and say that this will be in 7.5.
Alvaro Herrera, with some help from Tom Lane.
|
| |
|
|
|
|
|
|
|
| |
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
|
| |
|
|
|
|
|
| |
modify. Also fix a passel of problems with ALTER TABLE CLUSTER ON:
failure to check that the index is safe to cluster on (or even belongs
to the indicated rel, or even exists), and failure to broadcast a relcache
flush event when changing an index's state.
|
| |
|
|
|
|
|
|
|
| |
the relcache, and so the notion of 'blind write' is gone. This should
improve efficiency in bgwriter and background checkpoint processes.
Internal restructuring in md.c to remove the not-very-useful array of
MdfdVec objects --- might as well just use pointers.
Also remove the long-dead 'persistent main memory' storage manager (mm.c),
since it seems quite unlikely to ever get resurrected.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
| |
(overlaying low byte of page size) and add HEAP_HASOID bit to t_infomask,
per earlier discussion. Simplify scheme for overlaying fields in tuple
header (no need for cmax to live in more than one place). Don't try to
clear infomask status bits in tqual.c --- not safe to do it there. Don't
try to force output table of a SELECT INTO to have OIDs, either. Get rid
of unnecessarily complex three-state scheme for TupleDesc.tdhasoids, which
has already caused one recent failure. Improve documentation.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
bitmap, if present).
Per Tom Lane's suggestion the information whether a tuple has an oid
or not is carried in the tuple descriptor. For debugging reasons
tdhasoid is of type char, not bool. There are predefined values for
WITHOID, WITHOUTOID and UNDEFOID.
This patch has been generated against a cvs snapshot from last week
and I don't expect it to apply cleanly to current sources. While I
post it here for public review, I'm working on a new version against a
current snapshot. (There's been heavy activity recently; hope to
catch up some day ...)
This is a long patch; if it is too hard to swallow, I can provide it
in smaller pieces:
Part 1: Accessor macros
Part 2: tdhasoid in TupDesc
Part 3: Regression test
Part 4: Parameter withoid to heap_addheader
Part 5: Eliminate t_oid from HeapTupleHeader
Part 2 is the most hairy part because of changes in the executor and
even in the parser; the other parts are straightforward.
Up to part 4 the patched postmaster stays binary compatible to
databases created with an unpatched version. Part 5 is small (100
lines) and finally breaks compatibility.
Manfred Koizar
|
| | |
|
| | |
|
| |
|
|
|
| |
on the namespace not the name; pg_ is not a reserved prefix for table
names anymore. From Fernando Nasser.
|
| |
|
|
|
|
|
|
|
|
| |
speed up repetitive failed searches; per pghackers discussion in late
January. inval.c logic substantially simplified, since we can now treat
inserts and deletes alike as far as inval events are concerned. Some
repair work needed in heap_create_with_catalog, which turns out to have
been doing CommandCounterIncrement at a point where the new relation has
non-self-consistent catalog entries. With the new inval code, that
resulted in assert failures during a relcache entry rebuild.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Improve 'pg_internal.init' relcache entry preload mechanism so that it is
safe to use for all system catalogs, and arrange to preload a realistic
set of system-catalog entries instead of only the three nailed-in-cache
indexes that were formerly loaded this way. Fix mechanism for deleting
out-of-date pg_internal.init files: this must be synchronized with transaction
commit, not just done at random times within transactions. Drive it off
relcache invalidation mechanism so that no special-case tests are needed.
Cache additional information in relcache entries for indexes (their pg_index
tuples and index-operator OIDs) to eliminate repeated lookups. Also cache
index opclass info at the per-opclass level to avoid repeated lookups during
relcache load.
Generalize 'systable scan' utilities originally developed by Hiroshi,
move them into genam.c, use in a number of places where there was formerly
ugly code for choosing either heap or index scan. In particular this allows
simplification of the logic that prevents infinite recursion between syscache
and relcache during startup: we can easily switch to heapscans in relcache.c
when and where needed to avoid recursion, so IndexScanOK becomes simpler and
does not need any expensive initialization.
Eliminate useless opening of a heapscan data structure while doing an indexscan
(this saves an mdnblocks call and thus at least one kernel call).
|
| |
|
|
|
|
|
|
| |
This seems the right thing for most usages, but I notice two places
where it is the wrong thing. One is that the default permissions on
TOAST rels should be no-access, not world-readable; the other is that
PrepareForTupleInvalidation doesn't really need to spend time looking
at tuples of TOAST relations.
|
| |
|
|
| |
tests pass.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
SI messages now include the relevant database OID, so that operations
in one database do not cause useless cache flushes in backends attached
to other databases. Declare SI messages properly using a union, to
eliminate the former assumption that Oid is the same size as int or Index.
Rewrite the nearly-unreadable code in inval.c, and document it better.
Arrange for catcache flushes at end of command/transaction to happen before
relcache flushes do --- this avoids loading a new tuple into the catcache
while setting up new relcache entry, only to have it be flushed again
immediately.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CatalogCacheFlushRelation (formerly called SystemCacheRelationFlushed)
how to distinguish tuples it should flush from those it needn't; this
means a relcache flush event now only removes the catcache entries
it ought to, rather than zapping the caches completely as it used to.
Testing with the regression tests indicates that this considerably
improves the lifespan of catcache entries. Also, rearrange catcache
data structures so that the limit on number of cached tuples applies
globally across all the catcaches, rather than being per-catcache.
It was a little silly to have the same size limit on both, say,
pg_attribute caches and pg_am caches (there being only four possible
rows in the latter...). Doing LRU removal across all the caches
instead of locally in each one should reduce cache reload traffic
in the more heavily used caches and improve the efficiency of
cache memory use.
|
| | |
|
| | |
|
| |
|
|
| |
up the comments later.
|
| | |
|
| |
|
|
|
| |
they don't themselves flush any cache entries, only add to to-do lists
that will be processed later.
|
| |
|
|
|
|
|
|
|
| |
(WAL logging for this is not done yet, however.) Clean up a number of really
crufty things that are no longer needed now that DROP behaves nicely. Make
temp table mapper do the right things when drop or rename affecting a temp
table is rolled back. Also, remove "relation modified while in use" error
check, in favor of locking tables at first reference and holding that lock
throughout the statement.
|
| | |
|
