| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We must not push down a foreign join when the foreign tables involved
should be accessed under different user mappings. Previously we tried
to enforce that rule literally during planning, but that meant that the
resulting plans were dependent on the current contents of the
pg_user_mapping catalog, and we had to blow away all cached plans
containing any remote join when anything at all changed in pg_user_mapping.
This could have been improved somewhat, but the fact that a syscache inval
callback has very limited info about what changed made it hard to do better
within that design. Instead, let's change the planner to not consider user
mappings per se, but to allow a foreign join if both RTEs have the same
checkAsUser value. If they do, then they necessarily will use the same
user mapping at runtime, and we don't need to know specifically which one
that is. Post-plan-time changes in pg_user_mapping no longer require any
plan invalidation.
This rule does give up some optimization ability, to wit where two foreign
table references come from views with different owners or one's from a view
and one's directly in the query, but nonetheless the same user mapping
would have applied. We'll sacrifice the first case, but to not regress
more than we have to in the second case, allow a foreign join involving
both zero and nonzero checkAsUser values if the nonzero one is the same as
the prevailing effective userID. In that case, mark the plan as only
runnable by that userID.
The plancache code already had a notion of plans being userID-specific,
in order to support RLS. It was a little confused though, in particular
lacking clarity of thought as to whether it was the rewritten query or just
the finished plan that's dependent on the userID. Rearrange that code so
that it's clearer what depends on which, and so that the same logic applies
to both RLS-injected role dependency and foreign-join-injected role
dependency.
Note that this patch doesn't remove the other issue mentioned in the
original complaint, which is that while we'll reliably stop using a foreign
join if it's disallowed in a new context, we might fail to start using a
foreign join if it's now allowed, but we previously created a generic
cached plan that didn't use one. It was agreed that the chance of winning
that way was not high enough to justify the much larger number of plan
invalidations that would have to occur if we tried to cause it to happen.
In passing, clean up randomly-varying spelling of EXPLAIN commands in
postgres_fdw.sql, and fix a COSTS ON example that had been allowed to
leak into the committed tests.
This reverts most of commits fbe5a3fb7 and 5d4171d1c, which were the
previous attempt at ensuring we wouldn't push down foreign joins that
span permissions contexts.
Etsuro Fujita and Tom Lane
Discussion: <d49c1e5b-f059-20f4-c132-e9752ee0113e@lab.ntt.co.jp>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch provides a new implementation of the logic added by commit
137805f89 and later removed by 77ba61080. It differs from the original
primarily in expending much less effort per joinrel in large queries,
which it accomplishes by doing most of the matching work once per query not
once per joinrel. Hopefully, it's also less buggy and better commented.
The never-documented enable_fkey_estimates GUC remains gone.
There remains work to be done to make the selectivity estimates account
for nulls in FK referencing columns; but that was true of the original
patch as well. We may be able to address this point later in beta.
In the meantime, any error should be in the direction of overestimating
rather than underestimating joinrel sizes, which seems like the direction
we want to err in.
Tomas Vondra and Tom Lane
Discussion: <31041.1465069446@sss.pgh.pa.us>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As noted by Andres Freund, we'd accumulated quite a few similar functions
in clauses.c that examine all functions in an expression tree to see if
they satisfy some boolean test. Reduce the duplication by inventing a
function check_functions_in_node() that applies a simple callback function
to each SQL function OID appearing in a given expression node. This also
fixes some arguable oversights; for example, contain_mutable_functions()
did not check aggregate or window functions for mutability. I doubt that
that represents a live bug at the moment, because we don't really consider
mutability for aggregates; but it might someday be one.
I chose to put check_functions_in_node() in nodeFuncs.c because it seemed
like other modules might wish to use it in future. That in turn forced
moving set_opfuncid() et al into nodeFuncs.c, as the alternative was for
nodeFuncs.c to depend on optimizer/setrefs.c which didn't seem very clean.
In passing, teach contain_leaked_vars_walker() about a few more expression
node types it can safely look through, and improve the rather messy and
undercommented code in has_parallel_hazard_walker().
Discussion: <20160527185853.ziol2os2zskahl7v@alap3.anarazel.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Transmit the leader's temp-namespace state to workers. This is important
because without it, the workers do not really have the same search path
as the leader. For example, there is no good reason (and no extant code
either) to prevent a worker from executing a temp function that the
leader created previously; but as things stood it would fail to find the
temp function, and then either fail or execute the wrong function entirely.
We still prohibit a worker from creating a temp namespace on its own.
In effect, a worker can only see the session's temp namespace if the leader
had created it before starting the worker, which seems like the right
semantics.
Also, transmit the leader's BackendId to workers, and arrange for workers
to use that when determining the physical file path of a temp relation
belonging to their session. While the original intent was to prevent such
accesses entirely, there were a number of holes in that, notably in places
like dbsize.c which assume they can safely access temp rels of other
sessions anyway. We might as well get this right, as a small down payment
on someday allowing workers to access the leader's temp tables. (With
this change, directly using "MyBackendId" as a relation or buffer backend
ID is deprecated; you should use BackendIdForTempRelations() instead.
I left a couple of such uses alone though, as they're not going to be
reachable in parallel workers until we do something about localbuf.c.)
Move the thou-shalt-not-access-thy-leader's-temp-tables prohibition down
into localbuf.c, which is where it actually matters, instead of having it
in relation_open(). This amounts to recognizing that access to temp
tables' catalog entries is perfectly safe in a worker, it's only the data
in local buffers that is problematic.
Having done all that, we can get rid of the test in has_parallel_hazard()
that says that use of a temp table's rowtype is unsafe in parallel workers.
That test was unduly expensive, and if we really did need such a
prohibition, that was not even close to being a bulletproof guard for it.
(For example, any user-defined function executed in a parallel worker
might have attempted such access.)
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit reverts 137805f89 as well as the associated commits 015e88942,
5306df283, and 68d704edb. We found multiple bugs in this feature, and
there was concern about possible planner slowdown (though to be fair,
exhibiting a very large slowdown proved difficult). The way forward
requires a considerable rewrite, which may or may not be possible to
accomplish in time for beta2. In my judgment reviewing the rewrite will
be easier to accomplish starting from a clean slate, so let's temporarily
revert what's there now. This also leaves us in a safe state if it turns
out to be necessary to postpone the rewrite to the next development cycle.
Discussion: <20160429102531.GA13701@huehner.biz>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Hash indexes are not WAL-logged, and so do not maintain the LSN of
index pages. Since the "snapshot too old" feature counts on
detecting error conditions using the LSN of a table and all indexes
on it, this makes it impossible to safely do early vacuuming on any
table with a hash index, so add this to the tests for whether the
xid used to vacuum a table can be adjusted based on
old_snapshot_threshold.
While at it, add a paragraph to the docs for old_snapshot_threshold
which specifically mentions this and other aspects of the feature
which may otherwise surprise users.
Problem reported and patch reviewed by Amit Kapila
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
So far, when a transaction with pending invalidations, but without an
assigned xid, committed, we simply ignored those invalidation
messages. That's problematic, because those are actually sent for a
reason.
Known symptoms of this include that existing sessions on a hot-standby
replica sometimes fail to notice new concurrently built indexes and
visibility map updates.
The solution is to WAL log such invalidations in transactions without an
xid. We considered to alternatively force-assign an xid, but that'd be
problematic for vacuum, which might be run in systems with few xids.
Important: This adds a new WAL record, but as the patch has to be
back-patched, we can't bump the WAL page magic. This means that standbys
have to be updated before primaries; otherwise
"PANIC: standby_redo: unknown op code 32" errors can be encountered.
XXX:
Reported-By: Васильев Дмитрий, Masahiko Sawada
Discussion:
CAB-SwXY6oH=9twBkXJtgR4UC1NqT-vpYAtxCseME62ADwyK5OA@mail.gmail.com
CAD21AoDpZ6Xjg=gFrGPnSn4oTRRcwK1EBrWCq9OqOHuAcMMC=w@mail.gmail.com
|
| |
|
|
|
|
| |
It's not ready yet, revert two commits
690c543550b0d2852060c18d270cdb534d339d9a - unstable test output
386e3d7609c49505e079c40c65919d99feb82505 - patch itself
|
| |
|
|
|
|
|
|
|
|
| |
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
|
| |
|
|
|
|
|
| |
Fastpath ignores this if no triggers defined.
Author: Tomas Vondra, with fastpath and comments added by me
Reviewers: David Rowley, Simon Riggs
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the plancache, we check if the environment we planned the query under
has changed in a way which requires us to re-plan, such as when the user
for whom the plan was prepared changes and RLS is being used (and,
therefore, there may be different policies to apply).
Unfortunately, while those values were set and checked, they were not
being reset when the query was re-planned and therefore, in cases where
we change role, re-plan, and then change role again, we weren't
re-planning again. This leads to potentially incorrect policies being
applied in cases where role-specific policies are used and a given query
is planned under one role and then executed under other roles, which
could happen under security definer functions or when a common user and
query is planned initially and then re-used across multiple SET ROLEs.
Further, extensions which made use of CopyCachedPlan() may suffer from
similar issues as the RLS-related fields were not properly copied as
part of the plan and therefore RevalidateCachedQuery() would copy in the
current settings without invalidating the query.
Fix by using the same approach used for 'search_path', where we set the
correct values in CompleteCachedPlan(), check them early on in
RevalidateCachedQuery() and then properly reset them if re-planning.
Also, copy through the values during CopyCachedPlan().
Pointed out by Ashutosh Bapat. Reviewed by Michael Paquier.
Back-patch to 9.5 where RLS was introduced.
Security: CVE-2016-2193
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, the foreign join pushdown infrastructure left the question
of security entirely up to individual FDWs, but it would be easy for
a foreign data wrapper to inadvertently open up subtle security holes
that way. So, make it the core code's job to determine which user
mapping OID is relevant, and don't attempt join pushdown unless it's
the same for all relevant relations.
Per a suggestion from Tom Lane. Shigeru Hanada and Ashutosh Bapat,
reviewed by Etsuro Fujita and KaiGai Kohei, with some further
changes by me.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The amvalidate functions added in commit 65c5fcd353a859da were on the
crude side. Improve them in a few ways:
* Perform signature checking for operators and support functions.
* Apply more thorough checks for missing operators and functions,
where possible.
* Instead of reporting problems as ERRORs, report most problems as INFO
messages and make the amvalidate function return FALSE. This allows
more than one problem to be discovered per run.
* Report object names rather than OIDs, and work a bit harder on making
the messages understandable.
Also, remove a few more opr_sanity regression test queries that are
now superseded by the amvalidate checks.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
While the in-core authentication mechanism doesn't need to access
pg_shseclabel at all, it's reasonable to think that an authentication
hook will want to look at the label for the role logging in, or for rows
in other catalogs used during the authentication phase of startup.
Catalog version bumped, because this changes the "is nailed" status for
pg_shseclabel.
Author: Adam Brightwell
|
| |
|
|
| |
Backpatch certain files through 9.1
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit 8abb3cda0ddc00a0ab98977a1633a95b97068d4e I attempted to cache
the expression state trees constructed for domain CHECK constraints for
the life of the backend (assuming the domain's constraints don't get
redefined). However, this turns out not to work very well, because
execQual.c will run those state trees with ecxt_per_query_memory pointing
to a query-lifespan context, and in some situations we'll end up with
pointers into that context getting stored into the state trees. This
happens in particular with SQL-language functions, as reported by
Emre Hasegeli, but there are many other cases.
To fix, keep only the expression plan trees for domain CHECK constraints
in the typcache's data structure, and revert to performing ExecInitExpr
(at least) once per query to set up expression state trees in the query's
context.
Eventually it'd be nice to undo this, but that will require some careful
thought about memory management for expression state trees, and it seems
far too late for any such redesign in 9.5. This way is still much more
efficient than what happened before 8abb3cda0.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit 5d1ff6bd559ea8df1b7302e245e690b01b9a4fa4 I added some logic to
relcache.c to try to ensure that the regression tests would fail if we
made a mistake about which relations belong in the relcache init files.
I'm quite sure I tested that, but I must have done so only for the
non-shared-catalog case, because a report from Adam Brightwell showed that
the regression tests still pass just fine if we bollix the shared-catalog
init file in the way this code was supposed to catch. The reason is that
that file gets loaded before we do client authentication, so the WARNING
is not sent to the client, only to the postmaster log, where it's far too
easily missed.
The least Rube Goldbergian answer to this is to put an Assert(false)
after the elog(WARNING). That will certainly get developers' attention,
while not breaking production builds' ability to recover from corner
cases with similar symptoms.
Since this is only of interest to developers, there seems no need for
a back-patch, even though the previous commit went into all branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a new flag, consider_parallel, to each RelOptInfo, indicating
whether a plan for that relation could conceivably be run inside of
a parallel worker. Right now, we're pretty conservative: for example,
it might be possible to defer applying a parallel-restricted qual
in a worker, and later do it in the leader, but right now we just
don't try to parallelize access to that relation. That's probably
the right decision in most cases, anyway.
Using the new flag, generate parallel sequential scan plans for plain
baserels, meaning that we now have parallel sequential scan in
PostgreSQL. The logic here is pretty unsophisticated right now: the
costing model probably isn't right in detail, and we can't push joins
beneath Gather nodes, so the number of plans that can actually benefit
from this is pretty limited right now. Lots more work is needed.
Nevertheless, it seems time to enable this functionality so that all
this code can actually be tested easily by users and developers.
Note that, if you wish to test this functionality, it will be
necessary to set max_parallel_degree to a value greater than the
default of 0. Once a few more loose ends have been tidied up here, we
might want to consider changing the default value of this GUC, but
I'm leaving it alone for now.
Along the way, fix a bug in cost_gather: the previous coding thought
that a Gather node's transfer overhead should be costed on the basis of
the relation size rather than the number of tuples that actually need
to be passed off to the leader.
Patch by me, reviewed in earlier versions by Amit Kapila.
|
| |
|
|
|
|
|
|
|
|
| |
This commit's parent made superfluous the bit's sole usage. Referential
integrity checks have long run as the subject table's owner, and that
now implies RLS bypass. Safe use of the bit was tricky, requiring
strict control over the SQL expressions evaluating therein. Back-patch
to 9.5, where the bit was introduced.
Based on a patch by Stephen Frost.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 924bcf4f16d54c55310b28f77686608684734f42 introduced a framework
for parallel computation in PostgreSQL that makes most but not all
built-in functions safe to execute in parallel mode. In order to have
parallel query, we'll need to be able to determine whether that query
contains functions (either built-in or user-defined) that cannot be
safely executed in parallel mode. This requires those functions to be
labeled, so this patch introduces an infrastructure for that. Some
functions currently labeled as safe may need to be revised depending on
how pending issues related to heavyweight locking under paralllelism
are resolved.
Parallel plans can't be used except for the case where the query will
run to completion. If portal execution were suspended, the parallel
mode restrictions would need to remain in effect during that time, but
that might make other queries fail. Therefore, this patch introduces
a framework that enables consideration of parallel plans only when it
is known that the plan will be run to completion. This probably needs
some refinement; for example, at bind time, we do not know whether a
query run via the extended protocol will be execution to completion or
run with a limited fetch count. Having the client indicate its
intentions at bind time would constitute a wire protocol break. Some
contexts in which parallel mode would be safe are not adjusted by this
patch; the default is not to try parallel plans except from call sites
that have been updated to say that such plans are OK.
This commit doesn't introduce any parallel paths or plans; it just
provides a way to determine whether they could potentially be used.
I'm committing it on the theory that the remaining parallel sequential
scan patches will also get committed to this release, hopefully in the
not-too-distant future.
Robert Haas and Amit Kapila. Reviewed (in earlier versions) by Noah
Misch.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This refactors rewrite/rowsecurity.c to simplify the handling of the
default deny case (reducing the number of places where we check for and
add the default deny policy from three to one) by splitting up the
retrival of the policies from the application of them.
This also allowed us to do away with the policy_id field. A policy_name
field was added for WithCheckOption policies and is used in error
reporting, when available.
Patch by Dean Rasheed, with various mostly cosmetic changes by me.
Back-patch to 9.5 where RLS was introduced to avoid unnecessary
differences, since we're still in alpha, per discussion with Robert.
|
| |
|
|
|
|
|
|
|
|
| |
Per discussion, nowadays it is possible to have tablespaces that have
wildly different I/O characteristics from others. Setting different
effective_io_concurrency parameters for those has been measured to
improve performance.
Author: Julien Rouhaud
Reviewed by: Andres Freund
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Formerly, we treated only portals created in the current subtransaction as
having failed during subtransaction abort. However, if the error occurred
while running a portal created in an outer subtransaction (ie, a cursor
declared before the last savepoint), that has to be considered broken too.
To allow reliable detection of which ones those are, add a bookkeeping
field to struct Portal that tracks the innermost subtransaction in which
each portal has actually been executed. (Without this, we'd end up
failing portals containing functions that had called the subtransaction,
thereby breaking plpgsql exception blocks completely.)
In addition, when we fail an outer-subtransaction Portal, transfer its
resources into the subtransaction's resource owner, so that they're
released early in cleanup of the subxact. This fixes a problem reported by
Jim Nasby in which a function executed in an outer-subtransaction cursor
could cause an Assert failure or crash by referencing a relation created
within the inner subtransaction.
The proximate cause of the Assert failure is that AtEOSubXact_RelationCache
assumed it could blow away a relcache entry without first checking that the
entry had zero refcount. That was a bad idea on its own terms, so add such
a check there, and to the similar coding in AtEOXact_RelationCache. This
provides an independent safety measure in case there are still ways to
provoke the situation despite the Portal-level changes.
This has been broken since subtransactions were invented, so back-patch
to all supported branches.
Tom Lane and Michael Paquier
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The pg_stats view is supposed to be restricted to only show rows
about tables the user can read. However, it sometimes can leak
information which could not otherwise be seen when row level security
is enabled. Fix that by not showing pg_stats rows to users that would
be subject to RLS on the table the row is related to. This is done
by creating/using the newly introduced SQL visible function,
row_security_active().
Along the way, clean up three call sites of check_enable_rls(). The second
argument of that function should only be specified as other than
InvalidOid when we are checking as a different user than the current one,
as in when querying through a view. These sites were passing GetUserId()
instead of InvalidOid, which can cause the function to return incorrect
results if the current user has the BYPASSRLS privilege and row_security
has been set to OFF.
Additionally fix a bug causing RI Trigger error messages to unintentionally
leak information when RLS is enabled, and other minor cleanup and
improvements. Also add WITH (security_barrier) to the definition of pg_stats.
Bumped CATVERSION due to new SQL functions and pg_stats view definition.
Back-patch to 9.5 where RLS was introduced. Reported by Yaroslav.
Patch by Joe Conway and Dean Rasheed with review and input by
Michael Paquier and Stephen Frost.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The original implementation of TABLESAMPLE modeled the tablesample method
API on index access methods, which wasn't a good choice because, without
specialized DDL commands, there's no way to build an extension that can
implement a TSM. (Raw inserts into system catalogs are not an acceptable
thing to do, because we can't undo them during DROP EXTENSION, nor will
pg_upgrade behave sanely.) Instead adopt an API more like procedural
language handlers or foreign data wrappers, wherein the only SQL-level
support object needed is a single handler function identified by having
a special return type. This lets us get rid of the supporting catalog
altogether, so that no custom DDL support is needed for the feature.
Adjust the API so that it can support non-constant tablesample arguments
(the original coding assumed we could evaluate the argument expressions at
ExecInitSampleScan time, which is undesirable even if it weren't outright
unsafe), and discourage sampling methods from looking at invisible tuples.
Make sure that the BERNOULLI and SYSTEM methods are genuinely repeatable
within and across queries, as required by the SQL standard, and deal more
honestly with methods that can't support that requirement.
Make a full code-review pass over the tablesample additions, and fix
assorted bugs, omissions, infelicities, and cosmetic issues (such as
failure to put the added code stanzas in a consistent ordering).
Improve EXPLAIN's output of tablesample plans, too.
Back-patch to 9.5 so that we don't have to support the original API
in production.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit f3b5565dd4e59576be4c772da364704863e6a835 was a couple of bricks shy
of a load; specifically, it missed putting pg_trigger_tgrelid_tgname_index
into the relcache init file, because that index is not used by any
syscache. However, we have historically nailed that index into cache for
performance reasons. The upshot was that load_relcache_init_file always
decided that the init file was busted and silently ignored it, resulting
in a significant hit to backend startup speed.
To fix, reinstantiate RelationIdIsInInitFile() as a wrapper around
RelationSupportsSysCache(), which can know about additional relations
that should be in the init file despite being unknown to syscache.c.
Also install some guards against future mistakes of this type: make
write_relcache_init_file Assert that all nailed relations get written to
the init file, and make load_relcache_init_file emit a WARNING if it takes
the "wrong number of nailed relations" exit path. Now that we remove the
init files during postmaster startup, that case should never occur in the
field, even if we are starting a minor-version update that added or removed
rels from the nailed set. So the warning shouldn't ever be seen by end
users, but it will show up in the regression tests if somebody breaks this
logic.
Back-patch to all supported branches, like the previous commit.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When we invalidate the relcache entry for a system catalog or index, we
must also delete the relcache "init file" if the init file contains a copy
of that rel's entry. The old way of doing this relied on a specially
maintained list of the OIDs of relations present in the init file: we made
the list either when reading the file in, or when writing the file out.
The problem is that when writing the file out, we included only rels
present in our local relcache, which might have already suffered some
deletions due to relcache inval events. In such cases we correctly decided
not to overwrite the real init file with incomplete data --- but we still
used the incomplete initFileRelationIds list for the rest of the current
session. This could result in wrong decisions about whether the session's
own actions require deletion of the init file, potentially allowing an init
file created by some other concurrent session to be left around even though
it's been made stale.
Since we don't support changing the schema of a system catalog at runtime,
the only likely scenario in which this would cause a problem in the field
involves a "vacuum full" on a catalog concurrently with other activity, and
even then it's far from easy to provoke. Remarkably, this has been broken
since 2002 (in commit 786340441706ac1957a031f11ad1c2e5b6e18314), but we had
never seen a reproducible test case until recently. If it did happen in
the field, the symptoms would probably involve unexpected "cache lookup
failed" errors to begin with, then "could not open file" failures after the
next checkpoint, as all accesses to the affected catalog stopped working.
Recovery would require manually removing the stale "pg_internal.init" file.
To fix, get rid of the initFileRelationIds list, and instead consult
syscache.c's list of relations used in catalog caches to decide whether a
relation is included in the init file. This should be a tad more efficient
anyway, since we're replacing linear search of a list with ~100 entries
with a binary search. It's a bit ugly that the init file contents are now
so directly tied to the catalog caches, but in practice that won't make
much difference.
Back-patch to all supported branches.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a TABLESAMPLE clause to SELECT statements that allows
user to specify random BERNOULLI sampling or block level
SYSTEM sampling. Implementation allows for extensible
sampling functions to be written, using a standard API.
Basic version follows SQLStandard exactly. Usable
concrete use cases for the sampling API follow in later
commits.
Petr Jelinek
Reviewed by Michael Paquier and Simon Riggs
|
| |
|
|
|
|
| |
Catalog version bumped
Kyotaro HORIGUCHI
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The new type has the scope of whole the database cluster so it doesn't
behave the same as the existing OID alias types which have database
scope,
concerning object dependency. To avoid confusion constants of the new
type are prohibited from appearing where dependencies are made involving
it.
Also, add a note to the docs about possible MVCC violation and
optimization issues, which are general over the all reg* types.
Kyotaro Horiguchi
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer
Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: 20150216002155.GI15326@awork2.anarazel.de,
20140923182422.GA15776@alap3.anarazel.de,
20131114172632.GE7522@alap2.anarazel.de
|
| |
|
|
|
| |
Author: Dmitriy Olshevskiy
Discussion: 553D00A6.4090205@bk.ru
|
| |
|
|
|
|
|
|
| |
This provides a mechanism for specifying conversions between SQL data
types and procedural languages. As examples, there are transforms
for hstore and ltree for PL/Perl and PL/Python.
reviews by Pavel Stěhule and Andres Freund
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The USING policies were not being checked for differences as the same
policy was being passed in to both sides of the equal(). This could
result in backends not realizing that a policy had been changed, if
none of the other attributes had been changed.
Fix by passing to equal() the policy1 and policy2 using quals for
comparison.
No need to back-patch as this is not yet released. Noticed while
testing changes to RLS proposed by Dean Rasheed.
|
| |
|
|
|
|
|
|
|
|
| |
Now that we use CRC-32C in WAL and the control file, the "traditional" and
"legacy" CRC-32 variants are not used in any frontend programs anymore.
Move the code for those back from src/common to src/backend/utils/hash.
Also move the slicing-by-8 implementation (back) to src/port. This is in
preparation for next patch that will add another implementation that uses
Intel SSE 4.2 instructions to calculate CRC-32C, where available.
|
| |
|
|
|
|
|
|
|
|
| |
It now also reports temporary objects dropped that are local to the
backend. Previously we weren't reporting any temp objects because it
was deemed unnecessary; but as it turns out, it is necessary if we want
to keep close track of DDL command execution inside one session. Temp
objects are reported as living in schema pg_temp, which works because
such a schema-qualification always refers to the temp objects of the
current session.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, CHECK constraints of the same scope were checked in whatever
order they happened to be read from pg_constraint. (Usually, but not
reliably, this would be creation order for domain constraints and reverse
creation order for table constraints, because of differing implementation
details.) Nondeterministic results of this sort are problematic at least
for testing purposes, and in discussion it was agreed to be a violation of
the principle of least astonishment. Therefore, borrow the principle
already established for triggers, and apply such checks in name order
(using strcmp() sort rules). This lets users control the check order
if they have a mind to.
Domain CHECK constraints still follow the rule of checking lower nested
domains' constraints first; the name sort only applies to multiple
constraints attached to the same domain.
In passing, I failed to resist the temptation to wordsmith a bit in
create_domain.sgml.
Apply to HEAD only, since this could result in a behavioral change in
existing applications, and the potential regression test failures have
not actually been observed in our buildfarm.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, we cached domain constraints for the life of a query, or
really for the life of the FmgrInfo struct that was used to invoke
domain_in() or domain_check(). But plpgsql (and probably other places)
are set up to cache such FmgrInfos for the whole lifespan of a session,
which meant they could be enforcing really stale sets of constraints.
On the other hand, searching pg_constraint once per query gets kind of
expensive too: testing says that as much as half the runtime of a
trivial query such as "SELECT 0::domaintype" went into that.
To fix this, delegate the responsibility for tracking a domain's
constraints to the typcache, which has the infrastructure needed to
detect syscache invalidation events that signal possible changes.
This not only removes unnecessary repeat reads of pg_constraint,
but ensures that we never apply stale constraint data: whatever we
use is the current data according to syscache rules.
Unfortunately, the current configuration of the system catalogs means
we have to flush cached domain-constraint data whenever either pg_type
or pg_constraint changes, which happens rather a lot (eg, creation or
deletion of a temp table will do it). It might be worth rearranging
things to split pg_constraint into two catalogs, of which the domain
constraint one would probably be very low-traffic. That's a job for
another patch though, and in any case this patch should improve matters
materially even with that handicap.
This patch makes use of the recently-added memory context reset callback
feature to manage the lifespan of domain constraint caches, so that we
don't risk deleting a cache that might be in the midst of evaluation.
Although this is a bug fix as well as a performance improvement, no
back-patch. There haven't been many if any field complaints about
stale domain constraint checks, so it doesn't seem worth taking the
risk of modifying data structures as basic as MemoryContexts in back
branches.
|
| |
|
|
|
|
| |
Fix a batch of structs that are only visible within individual .c files.
Michael Paquier
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace some bogus "x[1]" declarations with "x[FLEXIBLE_ARRAY_MEMBER]".
Aside from being more self-documenting, this should help prevent bogus
warnings from static code analyzers and perhaps compiler misoptimizations.
This patch is just a down payment on eliminating the whole problem, but
it gets rid of a lot of easy-to-fix cases.
Note that the main problem with doing this is that one must no longer rely
on computing sizeof(the containing struct), since the result would be
compiler-dependent. Instead use offsetof(struct, lastfield). Autoconf
also warns against spelling that offsetof(struct, lastfield[0]).
Michael Paquier, review and additional fixes by me.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While building error messages to return to the user,
BuildIndexValueDescription, ExecBuildSlotValueDescription and
ri_ReportViolation would happily include the entire key or entire row in
the result returned to the user, even if the user didn't have access to
view all of the columns being included.
Instead, include only those columns which the user is providing or which
the user has select rights on. If the user does not have any rights
to view the table or any of the columns involved then no detail is
provided and a NULL value is returned from BuildIndexValueDescription
and ExecBuildSlotValueDescription. Note that, for key cases, the user
must have access to all of the columns for the key to be shown; a
partial key will not be returned.
Further, in master only, do not return any data for cases where row
security is enabled on the relation and row security should be applied
for the user. This required a bit of refactoring and moving of things
around related to RLS- note the addition of utils/misc/rls.c.
Back-patch all the way, as column-level privileges are now in all
supported versions.
This has been assigned CVE-2014-8161, but since the issue and the patch
have already been publicized on pgsql-hackers, there's no point in trying
to hide this commit.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix unsafe coding around PG_TRY in RelationBuildRowSecurity: can't change
a variable inside PG_TRY and then use it in PG_CATCH without marking it
"volatile". In this case though it seems saner to avoid that by doing
a single assignment before entering the TRY block.
I started out just intending to fix that, but the more I looked at the
row-security code the more distressed I got. This patch also fixes
incorrect construction of the RowSecurityPolicy cache entries (there was
not sufficient care taken to copy pass-by-ref data into the cache memory
context) and a whole bunch of sloppiness around the definition and use of
pg_policy.polcmd. You can't use nulls in that column because initdb will
mark it NOT NULL --- and I see no particular reason why a null entry would
be a good idea anyway, so changing initdb's behavior is not the right
answer. The internal value of '\0' wouldn't be suitable in a "char" column
either, so after a bit of thought I settled on using '*' to represent ALL.
Chasing those changes down also revealed that somebody wasn't paying
attention to what the underlying values of ACL_UPDATE_CHR etc really were,
and there was a great deal of lackadaiscalness in the catalogs.sgml
documentation for pg_policy and pg_policies too.
This doesn't pretend to be a complete code review for the row-security
stuff, it just fixes the things that were in my face while dealing with
the bugs in RelationBuildRowSecurity.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When using a historic snapshot for logical decoding it can validly
happen that a relation that's in the relcache isn't visible to that
historic snapshot. E.g. if a newly created relation is referenced in
the query that uses the SQL interface for logical decoding and a
sinval reset occurs.
The earlier commit that fixed the error handling for that corner case
already improves the situation as a ERROR is better than hitting an
assertion... But it's obviously not good enough. So additionally
allow that case without an error if a historic snapshot is set up -
that won't allow an invalid entry to stay in the cache because it's a)
already marked invalid and will thus be rebuilt during the next access
b) the syscaches will be reset at the end of decoding.
There might be prettier solutions to handle this case, but all that we
could think of so far end up being much more complex than this quite
simple fix.
This fixes the assertion failures reported by the buildfarm (markhor,
tick, leech) after the introduction of new regression tests in
89fd41b390a4. The failure there weren't actually directly caused by
CLOBBER_CACHE_ALWAYS but the extraordinary long runtimes due to it
lead to sinval resets triggering the behaviour.
Discussion: 22459.1418656530@sss.pgh.pa.us
Backpatch to 9.4 where logical decoding was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The corner case where a relcache invalidation tried to rebuild the
entry for a referenced relation but couldn't find it in the catalog
wasn't correct.
The code tried to RelationCacheDelete/RelationDestroyRelation the
entry. That didn't work when assertions are enabled because the latter
contains an assertion ensuring the refcount is zero. It's also more
generally a bad idea, because by virtue of being referenced somebody
might actually look at the entry, which is possible if the error is
trapped and handled via a subtransaction abort.
Instead just error out, without deleting the entry. As the entry is
marked invalid, the worst that can happen is that the invalid (and at
some point unused) entry lingers in the relcache.
Discussion: 22459.1418656530@sss.pgh.pa.us
There should be no way to hit this case < 9.4 where logical decoding
introduced a bug that can hit this. But since the code for handling
the corner case is there it should do something halfway sane, so
backpatch all the the way back. The logical decoding bug will be
handled in a separate commit.
|
| |
|
|
| |
Backpatch certain files through 9.0
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, if you wanted anything besides C-string hash keys, you had to
specify a custom hashing function to hash_create(). Nearly all such
callers were specifying tag_hash or oid_hash; which is tedious, and rather
error-prone, since a caller could easily miss the opportunity to optimize
by using hash_uint32 when appropriate. Replace this with a design whereby
callers using simple binary-data keys just specify HASH_BLOBS and don't
need to mess with specific support functions. hash_create() itself will
take care of optimizing when the key size is four bytes.
This nets out saving a few hundred bytes of code space, and offers
a measurable performance improvement in tidbitmap.c (which was not
exploiting the opportunity to use hash_uint32 for its 4-byte keys).
There might be some wins elsewhere too, I didn't analyze closely.
In future we could look into offering a similar optimized hashing function
for 8-byte keys. Under this design that could be done in a centralized
and machine-independent fashion, whereas getting it right for keys of
platform-dependent sizes would've been notationally painful before.
For the moment, the old way still works fine, so as not to break source
code compatibility for loadable modules. Eventually we might want to
remove tag_hash and friends from the exported API altogether, since there's
no real need for them to be explicitly referenced from outside dynahash.c.
Teodor Sigaev and Tom Lane
|
