| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
| |
Several PGXN modules reference LockTagType values; renumbering would
force a recompile of those modules. Oversight in back-patch of today's
commit 566372b3d6435639e4cc4476d79b8505a0297c87. Back-patch to released
branches, v12 through 9.5.
Reported by Tom Lane.
Discussion: https://postgr.es/m/921383.1597523945@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
nodeSubplan.c expects that the testexpr for a hashable ANY SubPlan
has the form of one or more OpExprs whose LHS is an expression of the
outer query's, while the RHS is an expression over Params representing
output columns of the subquery. However, the planner only went as far
as verifying that the clauses were all binary OpExprs. This works
99.99% of the time, because the clauses have the right shape when
emitted by the parser --- but it's possible for function inlining to
break that, as reported by PegoraroF10. To fix, teach the planner
to check that the LHS and RHS contain the right things, or more
accurately don't contain the wrong things. Given that this has been
broken for years without anyone noticing, it seems sufficient to just
give up hashing when it happens, rather than go to the trouble of
commuting the clauses back again (which wouldn't necessarily work
anyway).
While poking at that, I also noticed that nodeSubplan.c had a baked-in
assumption that the number of hash clauses is identical to the number
of subquery output columns. Again, that's fine as far as parser output
goes, but it's not hard to break it via function inlining. There seems
little reason for that assumption though --- AFAICS, the only thing
it's buying us is not having to store the number of hash clauses
explicitly. Adding code to the planner to reject such cases would take
more code than getting nodeSubplan.c to cope, so I fixed it that way.
This has been broken for as long as we've had hashable SubPlans,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/1549209182255-0.post@n3.nabble.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When a table is scanned by heapam_index_build_range_scan (née
IndexBuildHeapScan) and the table lock being held allows concurrent data
changes, it is possible for new HOT chains to sprout in a page that were
unknown when the scan of a page happened. This leads to an error such
as
ERROR: failed to find parent tuple for heap-only tuple at (X,Y) in table "tbl"
because the root tuple was not present when we first obtained the list
of the page's root tuples. This can be fixed by re-obtaining the list
of root tuples, if we see that a heap-only tuple appears to point to a
non-existing root.
This was reported by Anastasia as occurring for BRIN summarization
(which exists since 9.5), but I think it could theoretically also happen
with CREATE INDEX CONCURRENTLY (much older) or REINDEX CONCURRENTLY
(very recent). It seems a happy coincidence that BRIN forces us to
backpatch this all the way to 9.5.
Reported-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Diagnosed-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/602d8487-f0b2-5486-0088-0f372b2549fa@postgrespro.ru
Backpatch: 9.5 - master
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a page range is desummarized at just the right time concurrently with
an index walk, BRIN would raise an error indicating index corruption.
This is scary and unhelpful; silently returning that the page range is
not summarized is sufficient reaction.
This bug was introduced by commit 975ad4e602ff as additional protection
against a bug whose actual fix was elsewhere. Backpatch equally.
Reported-By: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Diagnosed-By: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/2588667e-d07d-7e10-74e2-7e1e46194491@postgrespro.ru
Backpatch: 9.5 - master
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is like CVE-2018-1058 commit
582edc369cdbd348d68441fc50fa26a84afd0c1a. Today, a malicious user of a
publisher or subscriber database can invoke arbitrary SQL functions
under an identity running replication, often a superuser. This fix may
cause "does not exist" or "no schema has been selected to create in"
errors in a replication process. After upgrading, consider watching
server logs for these errors. Objects accruing schema qualification in
the wake of the earlier commit are unlikely to need further correction.
Back-patch to v10, which introduced logical replication.
Security: CVE-2020-14349
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Hostile objects located within the installation-time search_path could
capture references in an extension's installation or upgrade script.
If the extension is being installed with superuser privileges, this
opens the door to privilege escalation. While such hazards have existed
all along, their urgency increases with the v13 "trusted extensions"
feature, because that lets a non-superuser control the installation path
for a superuser-privileged script. Therefore, make a number of changes
to make such situations more secure:
* Tweak the construction of the installation-time search_path to ensure
that references to objects in pg_catalog can't be subverted; and
explicitly add pg_temp to the end of the path to prevent attacks using
temporary objects.
* Disable check_function_bodies within installation/upgrade scripts,
so that any security gaps in SQL-language or PL-language function bodies
cannot create a risk of unwanted installation-time code execution.
* Adjust lookup of type input/receive functions and join estimator
functions to complain if there are multiple candidate functions. This
prevents capture of references to functions whose signature is not the
first one checked; and it's arguably more user-friendly anyway.
* Modify various contrib upgrade scripts to ensure that catalog
modification queries are executed with secure search paths. (These
are in-place modifications with no extension version changes, since
it is the update process itself that is at issue, not the end result.)
Extensions that depend on other extensions cannot be made fully secure
by these methods alone; therefore, revert the "trusted" marking that
commit eb67623c9 applied to earthdistance and hstore_plperl, pending
some better solution to that set of issues.
Also add documentation around these issues, to help extension authors
write secure installation scripts.
Patch by me, following an observation by Andres Freund; thanks
to Noah Misch for review.
Security: CVE-2020-14350
|
| |
|
|
|
| |
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 444a6779aafc552ac452715caa65cfca0e723073
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ashutosh Bapat noticed that when logical walsender needs to wait for
WAL, and it realizes that it must send a keepalive message to
walreceiver to update the sent-LSN, which *does not* request a reply
from walreceiver, it wrongly sets the flag that it's going to wait for
that reply. That means that any future would-be sender of feedback
messages ends up not sending a feedback message, because they all
believe that a reply is expected.
With built-in logical replication there's not much harm in this, because
WalReceiverMain will send a ping-back every wal_receiver_timeout/2
anyway; but with other logical replication systems (e.g. pglogical) it
can cause significant pain.
This problem was introduced in commit 41d5f8ad734, where the
request-reply flag was changed from true to false to WalSndKeepalive,
without at the same time removing the line that sets
waiting_for_ping_response.
Just removing that line would be a sufficient fix, but it seems better
to shift the responsibility of setting the flag to WalSndKeepalive
itself instead of requiring caller to do it; this is clearly less
error-prone.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Ashutosh Bapat <ashutosh.bapat@2ndquadrant.com>
Backpatch: 9.5 and up
Discussion: https://postgr.es/m/20200806225558.GA22401@alvherre.pgsql
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 13838740f fixed some issues with step generation in partition
pruning, but there was yet another one: get_steps_using_prefix() assumes
that clauses in the passed-in prefix list are sorted in ascending order
of their partition key numbers, but the caller failed to ensure this for
range partitioning, which led to an assertion failure in debug builds.
Adjust the caller function to arrange the clauses in the prefix list in
the required order for range partitioning.
Back-patch to v11, like the previous commit.
Patch by me, reviewed by Amit Langote.
Discussion: https://postgr.es/m/CAPmGK16jkXiFG0YqMbU66wte-oJTfW6D1HaNvQf%3D%2B5o9%3Dm55wQ%40mail.gmail.com
|
| |
|
|
|
| |
Per report from Tom Lane. Previously fixed in master by
commit f057980149ddccd4b862d2c6b3920ed498b0d7ec.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous coding imagined that it could call before_shmem_exit()
when a non-exclusive backup began and then remove the previously-added
handler by calling cancel_before_shmem_exit() when that backup
ended. However, this only works provided that nothing else in the
system has registered a before_shmem_exit() hook in the interim,
because cancel_before_shmem_exit() is documented to remove a callback
only if it is the latest callback registered. It also only works
if nothing can ERROR out between the time that sessionBackupState
is reset and the time that cancel_before_shmem_exit(), which doesn't
seem to be strictly true.
To fix, leave the handler installed for the lifetime of the session,
arrange to install it just once, and teach it to quietly do nothing if
there isn't a non-exclusive backup in process.
This was originally committed to master as
303640199d0436c5e7acdf50b837a027b5726594, but I did not back-patch
at the time because the consequences were minor. However, now
there's been a second report of this causing trouble with a slightly
different test case than the one I reported originally, so now
I'm back-patching as far as v11 where JIT was introduced.
Patch by me, reviewed by Kyotaro Horiguchi, Michael Paquier (who
preferred a different approach, but got outvoted), Fujii Masao,
and Tom Lane, and with comments by various others. New problem
report from Bharath Rupireddy.
Discussion: http://postgr.es/m/CA+TgmobMjnyBfNhGTKQEDbqXYE3_rXWpc4CM63fhyerNCes3mA@mail.gmail.com
Discussion: http://postgr.es/m/CALj2ACWk7j4F2v2fxxYfrroOF=AdFNPr1WsV+AGtHAFQOqm_pw@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since we no longer require AccessExclusiveLock to add a partition,
the executor may see that a partitioned table has more partitions
than the planner saw. ExecCreatePartitionPruneState's code for
matching up the partition lists in such cases was faulty, and would
misbehave if the planner had successfully pruned any partitions from
the query. (Thus, trouble would occur only if a partition addition
happens concurrently with a query that uses both static and dynamic
partition pruning.) This led to an Assert failure in debug builds,
and probably to crashes or query misbehavior in production builds.
To repair the bug, just explicitly skip zeroes in the plan's
relid_map[] list. I also made some cosmetic changes to make the code
more readable (IMO anyway). Also, convert the cross-checking Assert
to a regular test-and-elog, since it's now apparent that this logic
is more fragile than one would like.
Currently, there's no way to repeatably exercise this code, except
with manual use of a debugger to stop the backend between planning
and execution. Hence, no test case in this patch. We oughta do
something about that testability gap, but that's for another day.
Amit Langote and Tom Lane, per report from Justin Pryzby. Oversight
in commit 898e5e329; backpatch to v12 where that appeared.
Discussion: https://postgr.es/m/20200802181131.GA27754@telsasoft.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The new hlCover() algorithm that I introduced in commit c9b0c678d
turns out to potentially take O(N^2) or worse time on long documents,
if there are many occurrences of individual query words but few or no
substrings that actually satisfy the query. (One way to hit this
behavior is with a "common_word & rare_word" type of query.) This
seems unavoidable given the original goal of checking every substring
of the document, so we have to back off that idea. Fortunately, it
seems unlikely that anyone would really want headlines spanning all of
a long document, so we can avoid the worse-than-linear behavior by
imposing a maximum length of substring that we'll consider.
For now, just hard-wire that maximum length as a multiple of max_words
times max_fragments. Perhaps at some point somebody will argue for
exposing it as a ts_headline parameter, but I'm hesitant to make such
a feature addition in a back-patched bug fix.
I also noted that the hlFirstIndex() function I'd added in that
commit was unnecessarily stupid: it really only needs to check whether
a HeadlineWordEntry's item pointer is null or not. This wouldn't make
all that much difference in typical cases with queries having just
a few terms, but a cycle shaved is a cycle earned.
In addition, add a CHECK_FOR_INTERRUPTS call in TS_execute_recurse.
This ensures that hlCover's loop is cancellable if it manages to take
a long time, and it may protect some other TS_execute callers as well.
Back-patch to 9.6 as the previous commit was. I also chose to add the
CHECK_FOR_INTERRUPTS call to 9.5. The old hlCover() algorithm seems
to avoid the O(N^2) behavior, at least on the test case I tried, but
nonetheless it's not very quick on a long document.
Per report from Stephen Frost.
Discussion: https://postgr.es/m/20200724160535.GW12375@tamriel.snowman.net
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the case of range partitioning, get_steps_using_prefix() assumes that
the passed-in prefix list contains at least one clause for each of the
partition keys earlier than one specified in the passed-in
step_lastkeyno, but the caller (ie, gen_prune_steps_from_opexps())
didn't take it into account, which led to a server crash or incorrect
results when the list contained no clauses for such partition keys, as
reported in bug #16500 and #16501 from Kobayashi Hisanori. Update the
caller to call that function only when the list created there contains
at least one clause for each of the earlier partition keys in the case
of range partitioning.
While at it, fix some other issues:
* The list to pass to get_steps_using_prefix() is allowed to contain
multiple clauses for the same partition key, as described in the
comment for that function, but that function actually assumed that the
list contained just a single clause for each of middle partition keys,
which led to an assertion failure when the list contained multiple
clauses for such partition keys. Update that function to match the
comment.
* In the case of hash partitioning, partition keys are allowed to be
NULL, in which case the list to pass to get_steps_using_prefix()
contains no clauses for NULL partition keys, but that function treats
that case as like the case of range partitioning, which led to the
assertion failure. Update the assertion test to take into account
NULL partition keys in the case of hash partitioning.
* Fix a typo in a comment in get_steps_using_prefix_recurse().
* gen_partprune_steps() failed to detect self-contradiction from
strict-qual clauses and an IS NULL clause for the same partition key
in some cases, producing incorrect partition-pruning steps, which led
to incorrect results of partition pruning, but didn't cause any
user-visible problems fortunately, as the self-contradiction is
detected later in the query planning. Update that function to detect
the self-contradiction.
Per bug #16500 and #16501 from Kobayashi Hisanori. Patch by me, initial
diagnosis for the reported issue and review by Dmitry Dolgov.
Back-patch to v11, where partition pruning was introduced.
Discussion: https://postgr.es/m/16500-d1613f2a78e1e090%40postgresql.org
Discussion: https://postgr.es/m/16501-5234a9a0394f6754%40postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 85c9d347 addressed a similar problem for Gather and Gather
Merge nodes but forgot to account for nodes above parallel nodes. This
still works for nodes above Gather node because we shut down the workers
for Gather node as soon as there are no more tuples. We can do a similar
thing for Gather Merge as well but it seems better to account for stats
during nodes shutdown after completing the execution.
Reported-by: Stéphane Lorek, Jehan-Guillaume de Rorthais
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Reviewed-by: Amit Kapila
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/20200718160206.584532a2@firost
|
| |
|
|
|
|
|
| |
Remove extra space. Back-patch to all releases, like commit 7897e3bb.
Author: Lu, Chenyang <lucy.fnst@cn.fujitsu.com>
Discussion: https://postgr.es/m/795d03c6129844d3803e7eea48f5af0d%40G08CNEXMBPEKD04.g08.fujitsu.local
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Since commit 044c99bc5, eqjoinsel passes the passed-in collation
to any operators it invokes. However, neqjoinsel failed to pass
on whatever collation it got, so that if we invoked a
collation-dependent operator via that code path, we'd get "could not
determine which collation to use for string comparison" or the like.
Per report from Justin Pryzby. Back-patch to v12, like the previous
commit.
Discussion: https://postgr.es/m/20200721191606.GL5748@telsasoft.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The executor checks for this error, and so does the bootstrap catalog
loader, but we never checked for it in retail catalog manipulations.
The folly of that has now been exposed, so let's add assertions
checking it. Checking in CatalogTupleInsert[WithInfo] and
CatalogTupleUpdate[WithInfo] should be enough to cover this.
Back-patch to v10; the aforesaid functions didn't exist before that,
and it didn't seem worth adapting the patch to the oldest branches.
But given the risk of JIT crashes, I think we certainly need this
as far back as v11.
Pre-v13, we have to explicitly exclude pg_subscription.subslotname
and pg_subscription_rel.srsublsn from the checks, since they are
mismarked. (Even if we change our mind about applying BKI_FORCE_NULL
in the branch tips, it doesn't seem wise to have assertions that
would fire in existing databases.)
Discussion: https://postgr.es/m/298837.1595196283@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This coding technique is unsafe, since we'd be accessing off the end
of the tuple if the field is null. SIGSEGV is pretty improbable, but
perhaps not impossible. Also, returning garbage for the LSN doesn't
seem like a great idea, even if callers aren't looking at it today.
Also update docs to point out explicitly that
pg_subscription.subslotname and pg_subscription_rel.srsublsn
can be null.
Perhaps we should mark these two fields BKI_FORCE_NULL, so that
they'd be correctly labeled in databases that are initdb'd in the
future. But we can't force that for existing databases, and on
balance it's not too clear that having a mix of different catalog
contents in the field would be wise.
Apply to v10 (where this code came in) through v12. Already
fixed in v13 and HEAD.
Discussion: https://postgr.es/m/732838.1595278439@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since we mustn't force an initdb in released branches, there is no
simple way to correct the markings of pg_subscription.subslotname
and pg_subscription_rel.srsublsn as attnotnull in existing pre-v13
installations.
Fortunately, released branches don't rely on attnotnull being correct
for much. The planner looks at it in relation_excluded_by_constraints,
but it'd be difficult to get that to matter for a query on a system
catalog. The only place where it's really problematic is in JIT's
slot_compile_deform(), which can produce incorrect code that crashes
if there are NULLs in an allegedly not-null column.
Hence, hack up slot_compile_deform() to be specifically aware of
these two incorrect markings and not trust them.
This applies to v11 and v12; the JIT code didn't exist before that,
and we've fixed the markings in v13.
Discussion: https://postgr.es/m/229396.1595191345@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit b9c130a1f failed to apply the publisher-to-subscriber column
mapping while checking which columns were updated. Perhaps less
significantly, it didn't exclude dropped columns either. This could
result in an incorrect updated-columns bitmap and thus wrong decisions
about whether to fire column-specific triggers on the subscriber while
applying updates. In HEAD (since commit 9de77b545), it could also
result in accesses off the end of the colstatus array, as detected by
buildfarm member skink. Fix the logic, and adjust 003_constraints.pl
so that the problem is exposed in unpatched code.
In HEAD, also add some assertions to check that we don't access off
the ends of these newly variable-sized arrays.
Back-patch to v10, as b9c130a1f was.
Discussion: https://postgr.es/m/CAH2-Wz=79hKQ4++c5A060RYbjTHgiYTHz=fw6mptCtgghH2gJA@mail.gmail.com
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
reparameterize_path_by_child() failed to reparameterize BitmapAnd
and BitmapOr paths. This matters only if such a path is chosen as
the inside of a nestloop partition-wise join, where we have to pass
in parameters from the outside of the nestloop. If that did happen,
we generated a bad plan that would likely lead to crashes at execution.
This is not entirely reparameterize_path_by_child()'s fault though;
it's the victim of an ancient decision (my ancient decision, I think)
to not bother filling in param_info in BitmapAnd/Or path nodes. That
caused the function to believe that such nodes and their children
contain no parameter references and so need not be processed.
In hindsight that decision looks pretty penny-wise and pound-foolish:
while it saves a few cycles during path node setup, we do commonly
need the information later. In particular, by reversing the decision
and requiring valid param_info data in all nodes of a bitmap path
tree, we can get rid of indxpath.c's get_bitmap_tree_required_outer()
function, which computed the data on-demand. It's not unlikely that
that nets out as a savings of cycles in many scenarios. A couple
of other things in indxpath.c can be simplified as well.
While here, get rid of some cases in reparameterize_path_by_child()
that are visibly dead or useless, given that we only care about
reparameterizing paths that can be on the inside of a parameterized
nestloop. This case reminds one of the maxim that untested code
probably does not work, so I'm unwilling to leave unreachable code
in this function. (I did leave the T_Gather case in place even
though it's not reached in the regression tests. It's not very
clear to me when the planner might prefer to put Gather below
rather than above a nestloop, but at least in principle the case
might be interesting.)
Per bug #16536, originally from Arne Roland but with a test case
by Andrew Gierth. Back-patch to v11 where this code came in.
Discussion: https://postgr.es/m/16536-2213ee0b3aad41fd@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
An ALTER TABLE to validate a foreign key in which another subcommand
already caused a pending table rewrite could fail due to ALTER TABLE
attempting to validate the foreign key before the actual table rewrite
takes place. This situation could result in an error such as:
ERROR: could not read block 0 in file "base/nnnnn/nnnnn": read only 0 of 8192 bytes
The failure here was due to the SPI call which validates the foreign key
trying to access an index which is yet to be rebuilt.
Similarly, we also incorrectly tried to validate CHECK constraints before
the heap had been rewritten.
The fix for both is to delay constraint validation until phase 3, after
the table has been rewritten. For CHECK constraints this means a slight
behavioral change. Previously ALTER TABLE VALIDATE CONSTRAINT on
inheritance tables would be validated from the bottom up. This was
different from the order of evaluation when a new CHECK constraint was
added. The changes made here aligns the VALIDATE CONSTRAINT evaluation
order for inheritance tables to be the same as ADD CONSTRAINT, which is
generally top-down.
Reported-by: Nazli Ugur Koyluoglu, using SQLancer
Discussion: https://postgr.es/m/CAApHDvp%3DZXv8wiRyk_0rWr00skhGkt8vXDrHJYXRMft3TjkxCA%40mail.gmail.com
Backpatch-through: 9.5 (all supported versions)
|
| |
|
|
|
|
|
|
|
|
|
| |
Incorrect function names were referenced. As this fixes some portions
of tableam.h, that is mentioned in the docs as something to look at when
implementing a table AM, backpatch down to 12 where this has been
introduced.
Author: Hironobu Suzuki
Discussion: https://postgr.es/m/8fe6d672-28dd-3f1d-7aed-ac2f6d599d3f@interdb.jp
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The qual pushdown logic assumed that all Vars in a restriction clause
must be Vars referencing subquery outputs; but since we introduced
LATERAL, it's possible for such a Var to be a lateral reference instead.
This led to an assertion failure in debug builds. In a non-debug
build, there might be no ill effects (if qual_is_pushdown_safe decided
the qual was unsafe anyway), or we could get failures later due to
construction of an invalid plan. I've not gone to much length to
characterize the possible failures, but at least segfaults in the
executor have been observed.
Given that this has been busted since 9.3 and it took this long for
anybody to notice, I judge that the case isn't worth going to great
lengths to optimize. Hence, fix by just teaching qual_is_pushdown_safe
that such quals are unsafe to push down, matching the previous behavior
when it accidentally didn't fail.
Per report from Tom Ellis. Back-patch to all supported branches.
Discussion: https://postgr.es/m/20200713175124.GQ8220@cloudinit-builder
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
SQL standard doesn't define numeric Inf or NaN values. It appears even more
ridiculous to support then in jsonpath assuming JSON doesn't support these
values as well. This commit forbids returning NaN from .double(), which was
previously allowed. NaN can't be result of inner-jsonpath computation over
non-NaNs. So, we can not expect NaN in the jsonpath output.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/203949.1591879542%40sss.pgh.pa.us
Author: Alexander Korotkov
Reviewed-by: Tom Lane
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
| |
When jsonpath .double() method detects that numeric or string can't be
converted to double precision, it throws an error. This commit makes these
errors explicitly express the reason of failure.
Discussion: https://postgr.es/m/CAPpHfdtqJtiSXkP7tOXez18NxhLUH_-75bL8%3DOce4Ki%2Bbv7V6Q%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Tom Lane
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
| |
This message was being emitted on the grounds that only crashed
summarization could cause it, but in reality even an aborted vacuum
could do it ... which makes it way too noisy, particularly since it
shows up in regression tests and makes them die.
Reported by Tom Lane.
Discussion: https://postgr.es/m/489091.1593534251@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Due to not having our signals straight about CRLF vs. LF line
termination, the output of pg_current_logfile() included a trailing
\r on Windows. To fix, force the file descriptor it uses into text
mode.
While here, move a couple of local variable declarations to make
the function's logic clearer.
In v12 and v13, also back-patch the test added by 1c4e88e2f so that
this function has some test coverage. However, the 004_logrotate.pl
test script doesn't exist before v12, and it didn't seem worth adding
to older branches just for this.
Per report from Thomas Kellerer. Back-patch to v10 where this
function was added.
Discussion: https://postgr.es/m/412ae8da-76bb-640f-039a-f3513499e53d@gmx.net
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The cfbot and some BF animals are complaining about the previous
read_binary_file commit because of ignoring return value of ‘fread’.
So let's make everyone happy by testing the return value even though
not strictly needed.
Reported by Justin Pryzby, and suggested patch by Tom Lane. Backpatched
to v11 same as the previous commit.
Reported-By: Justin Pryzby
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/flat/969b8d82-5bb2-5fa8-4eb1-f0e685c5d736%40joeconway.com
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
read_binary_file(), used by SQL functions pg_read_file() and friends,
uses stat to determine file length to read, when not passed an explicit
length as an argument. This is problematic, for example, if the file
being read is a virtual file with a stat-reported length of zero.
Arrange to read until EOF, or StringInfo data string lenth limit, is
reached instead.
Original complaint and patch by me, with significant review, corrections,
advice, and code optimizations by Tom Lane. Backpatched to v11. Prior to
that only paths relative to the data and log dirs were allowed for files,
so no "zero length" files were reachable anyway.
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/flat/969b8d82-5bb2-5fa8-4eb1-f0e685c5d736%40joeconway.com
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After running GetForeignRelSize for a foreign table, adjust rel->tuples
to be at least as large as rel->rows. This prevents bizarre behavior
in estimate_num_groups() and perhaps other places, especially in the
scenario where rel->tuples is zero because pg_class.reltuples is
(suggesting that ANALYZE has never been run for the table). As things
stood, we'd end up estimating one group out of any GROUP BY on such a
table, whereas the default group-count estimate is more likely to result
in a sane plan.
Also, clarify in the documentation that GetForeignRelSize has the option
to override the rel->tuples value if it has a better idea of what to use
than what is in pg_class.reltuples.
Per report from Jeff Janes. Back-patch to all supported branches.
Patch by me; thanks to Etsuro Fujita for review
Discussion: https://postgr.es/m/CAMkU=1xNo9cnan+Npxgz0eK7394xmjmKg-QEm8wYG9P5-CcaqQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit ecd9e9f0b fixed the problem in the wrong place, causing unwanted
side-effects on the behavior of GetNextTempTableSpace(). Instead,
let's make SharedFileSetInit() responsible for subbing in the value
of MyDatabaseTableSpace when the default tablespace is called for.
The convention about what is in the tempTableSpaces[] array is
evidently insufficiently documented, so try to improve that.
It also looks like SharedFileSetInit() is doing the wrong thing in the
case where temp_tablespaces is empty. It was hard-wiring use of the
pg_default tablespace, but it seems like using MyDatabaseTableSpace
is more consistent with what happens for other temp files.
Back-patch the reversion of PrepareTempTablespaces()'s behavior to
9.5, as ecd9e9f0b was. The changes in SharedFileSetInit() go back
to v11 where that was introduced. (Note there is net zero code change
before v11 from these two patch sets, so nothing to release-note.)
Magnus Hagander and Tom Lane
Discussion: https://postgr.es/m/CABUevExg5YEsOvqMxrjoNvb3ApVyH+9jggWGKwTDFyFCVWczGQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
A likely copy/paste error in 98e8b480532 from back in 2004 would
cause temp tablespace to be reset to InvalidOid if temp_tablespaces
was set to the same value as the primary tablespace in the database.
This would cause shared filesets (such as for parallel hash joins)
to ignore them, putting the temporary files in the default tablespace
instead of the configured one. The bug is in the old code, but it
appears to have been exposed only once we had shared filesets.
Reviewed-By: Daniel Gustafsson
Discussion: https://postgr.es/m/CABUevExg5YEsOvqMxrjoNvb3ApVyH+9jggWGKwTDFyFCVWczGQ@mail.gmail.com
Backpatch-through: 9.5
|
| |
|
|
|
|
|
| |
The current definition is dangerous. No bugs exist in our code at
present, but backpatch to 11 nonetheless where it was introduced.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
explain_get_index_name() applied quote_identifier() to the index name.
This is fine for text output, but the non-text output formats all have
their own quoting conventions and would much rather start from the
actual index name. For example in JSON you'd get something like
"Index Name": "\"My Index\"",
which is surely not desirable, especially when the same does not
happen for table names. Hence, move the responsibility for applying
quoting out to the callers, where it can go into already-existing
special code paths for text format.
This changes the API spec for users of explain_get_index_name_hook:
before, they were supposed to apply quote_identifier() if necessary,
now they should not. Research suggests that the only publicly
available user of the hook is hypopg, and it actually forgot to
apply quoting anyway, so it's fine. (In any case, there's no
behavioral change for the output of a hook as seen in non-text
EXPLAIN formats, so this won't break any case that programs should
be relying on.)
Digging in the commit logs, it appears that quoting was included in
explain_get_index_name's duties when commit 604ffd280 invented it;
and that was fine at the time because we only had text output format.
This should have been rethought when non-text formats were invented,
but it wasn't.
This is a fairly clear bug for users of non-text EXPLAIN formats,
so back-patch to all supported branches.
Per bug #16502 from Maciek Sakrejda. Patch by me (based on
investigation by Euler Taveira); thanks to Julien Rouhaud for review.
Discussion: https://postgr.es/m/16502-57bd1c9f913ed1d1@postgresql.org
|
| |
|
|
|
|
|
|
|
|
| |
spg_mask() didn't take into account that pd_lower equal to SizeOfPageHeaderData
is still valid value. This commit fixes that. Backpatch to 11, where
spg_mask() pg_lower check was introduced.
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/20200615131405.GM52676%40paquier.xyz
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This was a danger only for --disable-spinlocks in combination with
atomic operations unsupported by the current platform.
While atomics.c was careful to signal that a separate semaphore ought
to be used when spinlock emulation is active, spin.c didn't actually
implement that mechanism. That's my (Andres') fault, it seems to have
gotten lost during the development of the atomic operations support.
Fix that issue and add test for nesting atomic operations inside a
spinlock.
Author: Andres Freund
Discussion: https://postgr.es/m/20200605023302.g6v3ydozy5txifji@alap3.anarazel.de
Backpatch: 9.5-
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Advancing a replication slot did not recompute the oldest xmin and LSN
values across replication slots, preventing resource removal like
segments not recycled at checkpoint time. The original commit that
introduced the slot advancing in 9c7d06d never did the update of those
oldest values, and b0afdca removed this code.
This commit adds a TAP test to check segment recycling with advancing
for physical slots, enforcing an extra segment switch before advancing
to check if the segment gets correctly recycled after a checkpoint.
Reported-by: Andres Freund
Reviewed-by: Alexey Kondratov, Kyptaro Horiguchi
Discussion: https://postgr.es/m/20200609171904.kpltxxvjzislidks@alap3.anarazel.de
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
| |
Once the counter goes negative we ended up with spinlocks that errored
out on first use (due to check in tas_sema).
Author: Andres Freund
Reviewed-By: Robert Haas
Discussion: https://postgr.es/m/20200606023103.avzrctgv7476xj7i@alap3.anarazel.de
Backpatch: 9.5-
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Convert buffile.c error handling to use ereport. This fixes cases where
I/O errors were indistinguishable from EOF or not reported. Also remove
"%m" from error messages where errno would be bogus. While we're
modifying those strings, add block numbers and short read byte counts
where appropriate.
Back-patch to all supported releases.
Reported-by: Amit Khandekar <amitdkhan.pg@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Ibrar Ahmed <ibrar.ahmad@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGJE04G%3D8TLK0DLypT_27D9dR8F1RQgNp0jK6qR0tZGWOw%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When there is just one non-null input value, and it is infinity or NaN,
aggregates such as stddev_pop and covar_pop should produce a NaN
result, because the calculation is not well-defined. They used to do
so, but since we adopted Youngs-Cramer aggregation in commit e954a727f,
they produced zero instead. That's an oversight, so fix it. Add tests
exercising these edge cases.
Affected aggregates are
var_pop(double precision)
stddev_pop(double precision)
var_pop(real)
stddev_pop(real)
regr_sxx(double precision,double precision)
regr_syy(double precision,double precision)
regr_sxy(double precision,double precision)
regr_r2(double precision,double precision)
regr_slope(double precision,double precision)
regr_intercept(double precision,double precision)
covar_pop(double precision,double precision)
corr(double precision,double precision)
Back-patch to v12 where the behavior change was accidentally introduced.
Report and patch by me; thanks to Dean Rasheed for review.
Discussion: https://postgr.es/m/353062.1591898766@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When merging two NumericAggStates, the code missed adding the new
state's NaNcount unless its N was also nonzero; since those counts
are independent, this is wrong.
This would only have visible effect if some partial aggregate scans
found only NaNs while earlier ones found only non-NaNs; then we could
end up falsely deciding that there were no NaNs and fail to return a
NaN final result as expected. That's pretty improbable, so it's no
surprise this hasn't been reported from the field. Still, it's a bug.
I didn't try to produce a regression test that would show the bug,
but I did notice that these functions weren't being reached at all
in our regression tests, so I improved the tests to at least
exercise them. With these additions, I see pretty complete code
coverage on the aggregation-related functions in numeric.c.
Back-patch to 9.6 where this code was introduced. (I only added
the improved test case as far back as v10, though, since the
relevant part of aggregates.sql isn't there at all in 9.6.)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
SSI's HeapCheckForSerializableConflictOut() test failed to correctly
handle conditions involving a concurrently inserted tuple which is later
concurrently updated by a separate transaction . A SELECT statement
that called HeapCheckForSerializableConflictOut() could end up using the
same XID (updater's XID) for both the original tuple, and the successor
tuple, missing the XID of the xact that created the original tuple
entirely. This only happened when neither tuple from the chain was
visible to the transaction's MVCC snapshot.
The observable symptoms of this bug were subtle. A pair of transactions
could commit, with the later transaction failing to observe the effects
of the earlier transaction (because of the confusion created by the
update to the non-visible row). This bug dates all the way back to
commit dafaa3ef, which added SSI.
To fix, make sure that we check the xmin of concurrently inserted tuples
that happen to also have been updated concurrently.
Author: Peter Geoghegan
Reported-By: Kyle Kingsbury
Reviewed-By: Thomas Munro
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443@jepsen.io
Backpatch: All supported versions
|
| |
|
|
|
|
|
| |
The previous description string still described the pre-PostgreSQL
10 (pre eb61136dc75a76caef8460fa939244d8593100f2) behavior of
selecting between encrypted and unencrypted, but it is now choosing
between encryption algorithms.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The redo routines for XLOG_CHECKPOINT_{ONLINE,SHUTDOWN} must acquire
ControlFileLock before modifying ControlFile->checkPointCopy, or the
checkpointer could write out a control file with a bad checksum.
Likewise, XLogReportParameters() must acquire ControlFileLock before
modifying ControlFile and calling UpdateControlFile().
Back-patch to all supported releases.
Author: Nathan Bossart <bossartn@amazon.com>
Author: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/70BF24D6-DC51-443F-B55A-95735803842A%40amazon.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 5e0928005 changed the planner so that, instead of blindly using
DEFAULT_COLLATION_OID when invoking operators for selectivity estimation,
it would use the collation of the column whose statistics we're
considering. This was recognized as still being not quite the right
thing, but it seemed like a good incremental improvement. However,
shortly thereafter we introduced nondeterministic collations, and that
creates cases where operators can fail if they're passed the wrong
collation. We don't want planning to fail in cases where the query itself
would work, so this means that we *must* use the query's collation when
invoking operators for estimation purposes.
The only real problem this creates is in ineq_histogram_selectivity, where
the binary search might produce a garbage answer if we perform comparisons
using a different collation than the column's histogram is ordered with.
However, when the query's collation is significantly different from the
column's default collation, the estimate we previously generated would be
pretty irrelevant anyway; so it's not clear that this will result in
noticeably worse estimates in practice. (A follow-on patch will improve
this situation in HEAD, but it seems too invasive for back-patch.)
The patch requires changing the signatures of mcv_selectivity and allied
functions, which are exported and very possibly are used by extensions.
In HEAD, I just did that, but an API/ABI break of this sort isn't
acceptable in stable branches. Therefore, in v12 the patch introduces
"mcv_selectivity_ext" and so on, with signatures matching HEAD, and makes
the old functions into wrappers that assume DEFAULT_COLLATION_OID should
be used. That does not match the prior behavior, but it should avoid risk
of failure in most cases. (In practice, I think most extension datatypes
aren't collation-aware, so the change probably doesn't matter to them.)
Per report from James Lucas. Back-patch to v12 where the problem was
introduced.
Discussion: https://postgr.es/m/CAAFmbbOvfi=wMM=3qRsPunBSLb8BFREno2oOzSBS=mzfLPKABw@mail.gmail.com
|
