| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
| |
Commit 16fa9b2b30 introduced a faster way to build GiST indexes, by
sorting all the data. This commit adds the sortsupport functions needed
to make use of that feature for btree_gist.
Author: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/2F3F7265-0D22-44DB-AD71-8554C743D943@yandex-team.ru
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Documentation and comments in code and tests have been using the terms
sensitive/insensitive cursor incorrectly relative to the SQL standard.
(Cursor sensitivity is only relevant for changes made in the same
transaction as the cursor, not for concurrent changes in other
sessions.) Moreover, some of the behavior of PostgreSQL is incorrect
according to the SQL standard, confusing the issue further. (WHERE
CURRENT OF changes are not visible in insensitive cursors, but they
should be.)
This change corrects the terminology and removes the claim that
sensitive cursors are supported. It also adds a test case that checks
the insensitive behavior in a "correct" way, using a change command
not using WHERE CURRENT OF. Finally, it adds the ASENSITIVE cursor
option to select the default asensitive behavior, per SQL standard.
There are no changes to cursor behavior in this patch.
Discussion: https://www.postgresql.org/message-id/flat/96ee8b30-9889-9e1b-b053-90e10c050e85%40enterprisedb.com
|
| |
|
|
|
| |
The previous wording contained a superfluous comma. Adjust phrasing
for grammatical correctness and clarity.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Bloom, GIN, GiST and SP-GiST rely on PageInit() to initialize the
contents of a page, and this routine fills entirely a page with zeros
for a size of BLCKSZ, including the special space. Those index AMs have
been using an extra memset() call to fill with zeros the special page
space, or even the whole page, which is not necessary as PageInit()
already does this work, so let's remove them. GiST was not doing this
extra call, but has commented out a system call that did so since
6236991.
While on it, remove one MAXALIGN() for SP-GiST as PageInit() takes care
of that. This makes the whole page initialization logic more consistent
across all index AMs.
Author: Bharath Rupireddy
Reviewed-by: Vignesh C, Mahendra Singh Thalor
Discussion: https://postgr.es/m/CALj2ACViOo2qyaPT7krWm4LRyRTw9kOXt+g6PfNmYuGA=YHj9A@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The "authenticated identity" is the string used by an authentication
method to identify a particular user. In many common cases, this is the
same as the PostgreSQL username, but for some third-party authentication
methods, the identifier in use may be shortened or otherwise translated
(e.g. through pg_ident user mappings) before the server stores it.
To help administrators see who has actually interacted with the system,
this commit adds the capability to store the original identity when
authentication succeeds within the backend's Port, and generates a log
entry when log_connections is enabled. The log entries generated look
something like this (where a local user named "foouser" is connecting to
the database as the database user called "admin"):
LOG: connection received: host=[local]
LOG: connection authenticated: identity="foouser" method=peer (/data/pg_hba.conf:88)
LOG: connection authorized: user=admin database=postgres application_name=psql
Port->authn_id is set according to the authentication method:
bsd: the PostgreSQL username (aka the local username)
cert: the client's Subject DN
gss: the user principal
ident: the remote username
ldap: the final bind DN
pam: the PostgreSQL username (aka PAM username)
password (and all pw-challenge methods): the PostgreSQL username
peer: the peer's pw_name
radius: the PostgreSQL username (aka the RADIUS username)
sspi: either the down-level (SAM-compatible) logon name, if
compat_realm=1, or the User Principal Name if compat_realm=0
The trust auth method does not set an authenticated identity. Neither
does clientcert=verify-full.
Port->authn_id could be used for other purposes, like a superuser-only
extra column in pg_stat_activity, but this is left as future work.
PostgresNode::connect_{ok,fails}() have been modified to let tests check
the backend log files for required or prohibited patterns, using the
new log_like and log_unlike parameters. This uses a method based on a
truncation of the existing server log file, like issues_sql_like().
Tests are added to the ldap, kerberos, authentication and SSL test
suites.
Author: Jacob Champion
Reviewed-by: Stephen Frost, Magnus Hagander, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/c55788dd1773c521c862e8e0dddb367df51222be.camel@vmware.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Delay creation of the projections for INSERT and UPDATE tuples
until they're needed. This saves a pretty fair amount of work
when only some of the partitions are actually touched.
The logic associated with identifying junk columns in UPDATE/DELETE
is moved to another loop, allowing removal of one loop over the
target relations; but it didn't actually change at all.
Extracted from a larger patch, which seemed to me to be too messy
to push in one commit.
Amit Langote, reviewed at different times by Heikki Linnakangas and
myself
Discussion: https://postgr.es/m/CA+HiwqG7ZruBmmih3wPsBZ4s0H2EhywrnXEduckY5Hr3fWzPWA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Arrange to do some things on-demand, rather than immediately during
executor startup, because there's a fair chance of never having to do
them at all:
* Don't open result relations' indexes until needed.
* Don't initialize partition tuple routing, nor the child-to-root
tuple conversion map, until needed.
This wins in UPDATEs on partitioned tables when only some of the
partitions will actually receive updates; with larger partition
counts the savings is quite noticeable. Also, we can remove some
sketchy heuristics in ExecInitModifyTable about whether to set up
tuple routing.
Also, remove execPartition.c's private hash table tracking which
partitions were already opened by the ModifyTable node. Instead
use the hash added to ModifyTable itself by commit 86dc90056.
To allow lazy computation of the conversion maps, we now set
ri_RootResultRelInfo in all child ResultRelInfos. We formerly set it
only in some, not terribly well-defined, cases. This has user-visible
side effects in that now more error messages refer to the root
relation instead of some partition (and provide error data in the
root's column order, too). It looks to me like this is a strict
improvement in consistency, so I don't have a problem with the
output changes visible in this commit.
Extracted from a larger patch, which seemed to me to be too messy
to push in one commit.
Amit Langote, reviewed at different times by Heikki Linnakangas and
myself
Discussion: https://postgr.es/m/CA+HiwqG7ZruBmmih3wPsBZ4s0H2EhywrnXEduckY5Hr3fWzPWA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Snapshot caching, introduced in 623a9ba79b, did not increment
xactCompletionCount during subtransaction abort. That could lead to an older
snapshot being reused. That is, at least as far as I can see, not a
correctness issue (for MVCC snapshots there's no difference between "in
progress" and "aborted"). The only difference between the old and new
snapshots would be a newer ->xmax.
While HeapTupleSatisfiesMVCC makes the same visibility determination, reusing
the old snapshot leads HeapTupleSatisfiesMVCC to not set
HEAP_XMIN_INVALID. Which subsequently causes the kill_prior_tuple optimization
to not kick in (via HeapTupleIsSurelyDead() returning false). The performance
effects of doing the same index-lookups over and over again is how the issue
was discovered...
Fix the issue by incrementing xactCompletionCount in
XidCacheRemoveRunningXids. It already acquires ProcArrayLock exclusively,
making that an easy proposition.
Add a test to ensure that kill_prior_tuple prevents index growth when it
involves aborted subtransaction of the current transaction.
Author: Andres Freund
Discussion: https://postgr.es/m/20210406043521.lopeo7bbigad3n6t@alap3.anarazel.de
Discussion: https://postgr.es/m/20210317055718.v6qs3ltzrformqoa%40alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Retry the call to heap_prune_page() in rare cases where there is
disagreement between the heap_prune_page() call and the call to
HeapTupleSatisfiesVacuum() that immediately follows. Disagreement is
possible when a concurrently-aborted transaction makes a tuple DEAD
during the tiny window between each step. This was the only case where
a tuple considered DEAD by VACUUM still had storage following pruning.
VACUUM's definition of dead tuples is now uniformly simple and
unambiguous: dead tuples from each page are always LP_DEAD line pointers
that were encountered just after we performed pruning (and just before
we considered freezing remaining items with tuple storage).
Eliminating the tupgone=true special case enables INDEX_CLEANUP=off
style skipping of index vacuuming that takes place based on flexible,
dynamic criteria. The INDEX_CLEANUP=off case had to know about skipping
indexes up-front before now, due to a subtle interaction with the
special case (see commit dd695979) -- this was a special case unto
itself. Now there are no special cases. And so now it won't matter
when or how we decide to skip index vacuuming: it won't affect how
pruning behaves, and it won't be affected by any of the implementation
details of pruning or freezing.
Also remove XLOG_HEAP2_CLEANUP_INFO records. These are no longer
necessary because we now rely entirely on heap pruning taking care of
recovery conflicts. There is no longer any need to generate recovery
conflicts for DEAD tuples that pruning just missed. This also means
that heap vacuuming now uses exactly the same strategy for recovery
conflicts as index vacuuming always has: REDO routines never need to
process a latestRemovedXid from the WAL record, since earlier REDO of
the WAL record from pruning is sufficient in all cases. The generic
XLOG_HEAP2_CLEAN record type is now split into two new record types to
reflect this new division (these are called XLOG_HEAP2_PRUNE and
XLOG_HEAP2_VACUUM).
Also stop acquiring a super-exclusive lock for heap pages when they're
vacuumed during VACUUM's second heap pass. A regular exclusive lock is
enough. This is correct because heap page vacuuming is now strictly a
matter of setting the LP_DEAD line pointers to LP_UNUSED. No other
backend can have a pointer to a tuple located in a pinned buffer that
can be invalidated by a concurrent heap page vacuum operation.
Heap vacuuming can now be thought of as conceptually similar to index
vacuuming and conceptually dissimilar to heap pruning. Heap pruning now
has sole responsibility for anything involving the logical contents of
the database (e.g., managing transaction status information, recovery
conflicts, considering what to do with HOT chains). Index vacuuming and
heap vacuuming are now only concerned with recycling garbage items from
physical data structures that back the logical database.
Bump XLOG_PAGE_MAGIC due to pruning and heap page vacuum WAL record
changes.
Credit for the idea of retrying pruning a page to avoid the tupgone case
goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznneCXTzuFmcwx_EyRQgfsfJAAsu+CsqRFmFXCAar=nJw@mail.gmail.com
|
| |
|
|
| |
Per cpluspluscheck.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Handling of incompatible clauses while applying extended statistics was
a bit confused - while handling a mix of compatible and incompatible
clauses it sometimes incorrectly treated the incompatible clauses as
compatible, resulting in a crash.
Fixed by reworking the code applying the selected statistics object to
make it easier to understand, and adding a proper compatibility check.
Reported-by: David Rowley
Discussion: https://postgr.es/m/CAApHDvpYT10-nkSp8xXe-nbO3jmoaRyRFHbzh-RWMfAJynqgpQ%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a lazy_scan_heap() subsidiary function that handles heap pruning and
tuple freezing: lazy_scan_prune(). This is a great deal cleaner. The
code that remains in lazy_scan_heap()'s per-block loop can now be
thought of as code that either comes before or after the call to
lazy_scan_prune(), which is now the clear focal point. This division is
enforced by the way in which we now manage state. lazy_scan_prune()
outputs state (using its own struct) that describes what to do with the
page following pruning and freezing (e.g., visibility map maintenance,
recording free space in the FSM). It doesn't get passed any special
instructional state from the preamble code, though.
Also cleanly separate the logic used by a VACUUM with INDEX_CLEANUP=off
from the logic used by single-heap-pass VACUUMs. The former case is now
structured as the omission of index and heap vacuuming by a two pass
VACUUM. The latter case goes back to being used only when the table
happens to have no indexes (just as it was before commit a96c41fe).
This structure is much more natural, since the whole point of
INDEX_CLEANUP=off is to skip the index and heap vacuuming that would
otherwise take place. The single-heap-pass case doesn't skip any useful
work, though -- it just does heap pruning and heap vacuuming together
when the table happens to have no indexes.
Both of these changes are preparation for an upcoming patch that
generalizes the mechanism used by INDEX_CLEANUP=off. The later patch
will allow VACUUM to give up on index and heap vacuuming dynamically, as
problems emerge (e.g., with wraparound), so that an affected VACUUM
operation can finish up as soon as possible.
Also fix a very old bug in single-pass VACUUM VERBOSE output. We were
reporting the number of tuples deleted via pruning as a direct
substitute for reporting the number of LP_DEAD items removed in a
function that deals with the second pass over the heap. But that
doesn't work at all -- they're two different things.
To fix, start tracking the total number of LP_DEAD items encountered
during pruning, and use that in the report instead. A single pass
VACUUM will always vacuum away whatever LP_DEAD items a heap page has
immediately after it is pruned, so the total number of LP_DEAD items
encountered during pruning equals the total number vacuumed-away.
(They are _not_ equal in the INDEX_CLEANUP=off case, but that's okay
because skipping index vacuuming is now a totally orthogonal concept to
one-pass VACUUM.)
Also stop reporting the count of LP_UNUSED items in VACUUM VERBOSE
output. This makes the output of VACUUM VERBOSE more consistent with
log_autovacuum's output (because it never showed information about
LP_UNUSED items). VACUUM VERBOSE reported LP_UNUSED items left behind
by the last VACUUM, and LP_UNUSED items created via pruning HOT chains
during the current VACUUM (it never included LP_UNUSED items left behind
by the current VACUUM's second pass over the heap). This makes it
useless as an indicator of line pointer bloat, which must have been the
original intention. (Like the first VACUUM VERBOSE issue, this issue was
arguably an oversight in commit 282d2a03, which added the heap-only
tuple optimization.)
Finally, stop reporting empty_pages in VACUUM VERBOSE output, and start
reporting pages_removed instead. This also makes the output of VACUUM
VERBOSE more consistent with log_autovacuum's output (which does not
show empty_pages, but does show pages_removed). An empty page isn't
meaningfully different to a page that is almost empty, or a page that is
empty but for only a small number of remaining LP_UNUSED items.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznneCXTzuFmcwx_EyRQgfsfJAAsu+CsqRFmFXCAar=nJw@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Andrew Gierth reported that it's possible to crash the backend if no
pg_attrdef record is found to match an attribute that has atthasdef set.
AttrDefaultFetch warns about this situation, but then leaves behind
a relation tupdesc that has null "adbin" pointer(s), which most places
don't guard against.
We considered promoting the warning to an error, but throwing errors
during relcache load is pretty drastic: it effectively locks one out
of using the relation at all. What seems better is to leave the
load-time behavior as a warning, but then throw an error in any code
path that wants to use a default and can't find it. This confines
the error to a subset of INSERT/UPDATE operations on the table, and
in particular will at least allow a pg_dump to succeed.
Also, we should fix AttrDefaultFetch to not leave any null pointers
in the tupdesc, because that just creates an untested bug hazard.
While at it, apply the same philosophy of "warn at load, throw error
only upon use of the known-missing info" to CHECK constraints.
CheckConstraintFetch is very nearly the same logic as AttrDefaultFetch,
but for reasons lost in the mists of time, it was throwing ERROR for
the same cases that AttrDefaultFetch treats as WARNING. Make the two
functions more nearly alike.
In passing, get rid of potentially-O(N^2) loops in equalTupleDesc
by making AttrDefaultFetch sort the entries after fetching them,
so that equalTupleDesc can assume that entries in two equal tupdescs
must be in matching order. (CheckConstraintFetch already was sorting
CHECK constraints, but equalTupleDesc hadn't been told about it.)
There's some argument for back-patching this, but with such a small
number of field reports, I'm content to fix it in HEAD.
Discussion: https://postgr.es/m/87pmzaq4gx.fsf@news-spur.riddles.org.uk
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously if hot standby was enabled, archive recovery exited with
an error when it found WAL generated with wal_level=minimal.
But if hot standby was disabled, it just reported a warning and
continued in that case. Which could lead to data loss or errors
during normal operation. A warning was emitted, but users could
easily miss that and not notice this serious situation until
they encountered the actual errors.
To improve this situation, this commit changes archive recovery
so that it exits with FATAL error when it finds WAL generated with
wal_level=minimal whatever the setting of hot standby. This enables
users to notice the serious situation soon.
The FATAL error is thrown if archive recovery starts from a base
backup taken before wal_level is changed to minimal. When archive
recovery exits with the error, if users have a base backup taken
after setting wal_level to higher than minimal, they can recover
the database by starting archive recovery from that newer backup.
But note that if such backup doesn't exist, there is no easy way to
complete archive recovery, which may make the database server
unstartable and users may lose whole database. The commit adds
the note about this risk into the document.
Even in the case of unstartable database server, previously by just
disabling hot standby users could avoid the error during archive
recovery, forcibly start up the server and salvage data from it.
But note that this commit makes this procedure unavailable at all.
Author: Takamichi Osumi
Reviewed-by: Laurenz Albe, Kyotaro Horiguchi, David Steele, Fujii Masao
Discussion: https://postgr.es/m/OSBPR01MB4888CBE1DA08818FD2D90ED8EDF90@OSBPR01MB4888.jpnprd01.prod.outlook.com
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Adjust the number of events given to WaitEventSetWait() so that it
doesn't exceed the maximum number of events in the WaitEventSet given
to that function (set->nevents_space) in hopes of making the buildfarm
green.
Per valgrind failure report from Tom Lane and the buildfarm.
Author: Etsuro Fujita
Discussion: https://postgr.es/m/3411577.1617289776%40sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
At present, if we want to update publications in a subscription, we
can use SET PUBLICATION. However, it requires supplying all
publications that exists and the new publications. If we want to add
new publications, it's inconvenient. The new syntax only supplies the
new publications. When the refresh is true, it only refreshes the new
publications.
Author: Japin Li <japinli@hotmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/MEYP282MB166939D0D6C480B7FBE7EFFBB6BC0@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous implementation of EXTRACT mapped internally to
date_part(), which returned type double precision (since it was
implemented long before the numeric type existed). This can lead to
imprecise output in some cases, so returning numeric would be
preferrable. Changing the return type of an existing function is a
bit risky, so instead we do the following: We implement a new set of
functions, which are now called "extract", in parallel to the existing
date_part functions. They work the same way internally but use
numeric instead of float8. The EXTRACT construct is now mapped by the
parser to these new extract functions. That way, dumps of views
etc. from old versions (which would use date_part) continue to work
unchanged, but new uses will map to the new extract functions.
Additionally, the reverse compilation of EXTRACT now reproduces the
original syntax, using the new mechanism introduced in
40c24bfef92530bd846e111c1742c2a54441c62c.
The following minor changes of behavior result from the new
implementation:
- The column name from an isolated EXTRACT call is now "extract"
instead of "date_part".
- Extract from date now rejects inappropriate field names such as
HOUR. It was previously mapped internally to extract from
timestamp, so it would silently accept everything appropriate for
timestamp.
- Return values when extracting fields with possibly fractional
values, such as second and epoch, now have the full scale that the
value has internally (so, for example, '1.000000' instead of just
'1').
Reported-by: Petr Fedorov <petr.fedorov@phystech.edu>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/42b73d2d-da12-ba9f-570a-420e0cce19d9@phystech.edu
|
| |
|
|
|
|
|
| |
Introduced by 9868167500.
Author: Vignesh C
Discussion: https://postgr.es/m/CALDaNm1DqgaLBAJrtGznKk1sR1mH-augmp7LfGvxWwTUhah+rg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 3e98c0bafb added pg_backend_memory_contexts view to display
the memory contexts of the backend process. However its target process
is limited to the backend that is accessing to the view. So this is
not so convenient when investigating the local memory bloat of other
backend process. To improve this situation, this commit adds
pg_log_backend_memory_contexts() function that requests to log
the memory contexts of the specified backend process.
This information can be also collected by calling
MemoryContextStats(TopMemoryContext) via a debugger. But
this technique cannot be used in some environments because no debugger
is available there. So, pg_log_backend_memory_contexts() allows us to
see the memory contexts of specified backend more easily.
Only superusers are allowed to request to log the memory contexts
because allowing any users to issue this request at an unbounded rate
would cause lots of log messages and which can lead to denial of service.
On receipt of the request, at the next CHECK_FOR_INTERRUPTS(),
the target backend logs its memory contexts at LOG_SERVER_ONLY level,
so that these memory contexts will appear in the server log but not
be sent to the client. It logs one message per memory context.
Because if it buffers all memory contexts into StringInfo to log them
as one message, which may require the buffer to be enlarged very much
and lead to OOM error since there can be a large number of memory
contexts in a backend.
When a backend process is consuming huge memory, logging all its
memory contexts might overrun available disk space. To prevent this,
now this patch limits the number of child contexts to log per parent
to 100. As with MemoryContextStats(), it supposes that practical cases
where the log gets long will typically be huge numbers of siblings
under the same parent context; while the additional debugging value
from seeing details about individual siblings beyond 100 will not be large.
There was another proposed patch to add the function to return
the memory contexts of specified backend as the result sets,
instead of logging them, in the discussion. However that patch is
not included in this commit because it had several issues to address.
Thanks to Tatsuhito Kasahara, Andres Freund, Tom Lane, Tomas Vondra,
Michael Paquier, Kyotaro Horiguchi and Zhihong Yu for the discussion.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Zhihong Yu, Fujii Masao
Discussion: https://postgr.es/m/0271f440ac77f2a4180e0e56ebd944d1@oss.nttdata.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The output plugin accepts a new parameter (messages) that controls if
logical decoding messages are written into the replication stream. It is
useful for those clients that use pgoutput as an output plugin and needs
to process messages that were written by pg_logical_emit_message().
Although logical streaming replication protocol supports logical
decoding messages now, logical replication does not use this feature yet.
Author: David Pirotte, Euler Taveira
Reviewed-by: Euler Taveira, Andres Freund, Ashutosh Bapat, Amit Kapila
Discussion: https://postgr.es/m/CADK3HHJ-+9SO7KuRLH=9Wa1rAo60Yreq1GFNkH_kd0=CdaWM+A@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
| |
Instead of using multiple parameters in parse_ouput_parameters function
signature, use the struct PGOutputData that encapsulates all pgoutput
options. It will be useful for future work where we need to add other
options in pgoutput.
Author: Euler Taveira
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CADK3HHJ-+9SO7KuRLH=9Wa1rAo60Yreq1GFNkH_kd0=CdaWM+A@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 49f49def took entirely the wrong approach to fixing this issue.
Just allocate a local buffer access strategy in each individual worker
instead of trying to propagate state. This state was never propagated
by parallel VACUUM in the first place.
It looks like the only reason that this worked following commit 40d964ec
was that it involved static global variables, which are initialized to 0
per the C standard.
A more comprehensive fix may be necessary, even on HEAD. This fix
should at least get the buildfarm green once again.
Thanks once again to Thomas Munro for continued off-list assistance with
the issue.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Not much to say here: does what it says on the tin.
We steal a previously-always-zero bit from the nextOffset
field of leaf index tuples in order to track whether there
is a nulls bitmap. Otherwise it works about like included
columns in other index types.
Pavel Borisov, reviewed by Andrey Borodin and Anastasia Lubennikova,
and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CALT9ZEFi-vMp4faht9f9Junb1nO3NOSjhpxTmbm1UGLMsLqiEQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Parallel VACUUM relied on global variable state from the leader process
being propagated to workers on fork(). Commit b4af70cb removed most
uses of global variables inside vacuumlazy.c, but did not account for
the buffer access strategy state.
To fix, propagate the state through shared memory instead.
Per buildfarm failures on elver, curculio, and morepork.
Many thanks to Thomas Munro for off-list assistance with this issue.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reorganize the state struct used by VACUUM -- group related items
together to make it easier to understand. Also stop relying on stack
variables inside lazy_scan_heap() -- move those into the state struct
instead. Doing things this way simplifies large groups of related
functions whose function signatures had a lot of unnecessary redundancy.
Switch over to using int64 for the struct fields used to count things
that are reported to the user via log_autovacuum and VACUUM VERBOSE
output. We were using double, but that doesn't seem to have any
advantages. Using int64 makes it possible to add assertions that verify
that the first pass over the heap (pruning) encounters precisely the
same number of LP_DEAD items that get deleted from indexes later on, in
the second pass over the heap. These assertions will be added in later
commits.
Finally, adjust the signatures of functions with IndexBulkDeleteResult
pointer arguments in cases where there was ambiguity about whether or
not the argument relates to a single index or all indexes. Functions
now use the idiom that both ambulkdelete() and amvacuumcleanup() have
always used (where appropriate): accept a mutable IndexBulkDeleteResult
pointer argument, and return a result IndexBulkDeleteResult pointer to
caller.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkeOSYwC6KNckbhk2b1aNnWum6Yyn0NKP9D-Hq1LGTDPw@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A commonly requested use-case is to have a role who can run an
unfettered pg_dump without having to explicitly GRANT that user access
to all tables, schemas, et al, without that role being a superuser.
This address that by adding a "pg_read_all_data" role which implicitly
gives any member of this role SELECT rights on all tables, views and
sequences, and USAGE rights on all schemas.
As there may be cases where it's also useful to have a role who has
write access to all objects, pg_write_all_data is also introduced and
gives users implicit INSERT, UPDATE and DELETE rights on all tables,
views and sequences.
These roles can not be logged into directly but instead should be
GRANT'd to a role which is able to log in. As noted in the
documentation, if RLS is being used then an administrator may (or may
not) wish to set BYPASSRLS on the login role which these predefined
roles are GRANT'd to.
Reviewed-by: Georgios Kokolatos
Discussion: https://postgr.es/m/20200828003023.GU29590@tamriel.snowman.net
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Maxim Orlov reported that the shutdown of standby server could result in
the following assertion failure. The cause of this issue was that,
when the shutdown caused the startup process to exit, recovery-time
transaction tracking was not shut down even if it's already initialized,
and some locks the tracked transactions were holding could not be released.
At this situation, if other process was invoked and the PGPROC entry that
the startup process used was assigned to it, it found such unreleased locks
and caused the assertion failure, during the initialization of it.
TRAP: FailedAssertion("SHMQueueEmpty(&(MyProc->myProcLocks[i]))"
This commit fixes this issue by making the startup process shut down
transaction tracking and release all locks, at the exit of it.
Back-patch to all supported branches.
Reported-by: Maxim Orlov
Author: Fujii Masao
Reviewed-by: Maxim Orlov
Discussion: https://postgr.es/m/ad4ce692cc1d89a093b471ab1d969b0b@postgrespro.ru
|
| |
|
|
|
|
|
| |
Introduced by 51e225d.
Author: Anton Voloshin
Discussion: https://postgr.es/m/05477da0-703c-7de7-998c-5879738e8f39@postgrespro.ru
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
spg_box_quad_leaf_consistent unconditionally returned the leaf
datum as leafValue, even though in its usage for poly_ops that
value is of completely the wrong type.
In versions before 12, that was harmless because the core code did
nothing with leafValue in non-index-only scans ... but since commit
2a6368343, if we were doing a KNN-style scan, spgNewHeapItem would
unconditionally try to copy the value using the wrong datatype
parameters. Said copying is a waste of time and space if we're not
going to return the data, but it accidentally failed to fail until
I fixed the datatype confusion in ac9099fc1.
Hence, change spgNewHeapItem to not copy the datum unless we're
actually going to return it later. This saves cycles and dodges
the question of whether lossy opclasses are returning the right
type. Also change spg_box_quad_leaf_consistent to not return
data that might be of the wrong type, as insurance against
somebody introducing a similar bug into the core code in future.
It seems like a good idea to back-patch these two changes into
v12 and v13, although I'm afraid to change spgNewHeapItem's
mistaken idea of which datatype to use in those branches.
Per buildfarm results from ac9099fc1.
Discussion: https://postgr.es/m/3728741.1617381471@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
According to the documentation, the attType passed to the opclass
config function (and also relied on by the core code) is the type
of the heap column or expression being indexed. But what was
actually being passed was the type stored for the index column.
This made no difference for user-defined SP-GiST opclasses,
because we weren't allowing the STORAGE clause of CREATE OPCLASS
to be used, so the two types would be the same. But it's silly
not to allow that, seeing that the built-in poly_ops opclass
has a different value for opckeytype than opcintype, and that if you
want to do lossy storage then the types must really be different.
(Thus, user-defined opclasses doing lossy storage had to lie about
what type is in the index.) Hence, remove the restriction, and make
sure that we use the input column type not opckeytype where relevant.
For reasons of backwards compatibility with existing user-defined
opclasses, we can't quite insist that the specified leafType match
the STORAGE clause; instead just add an amvalidate() warning if
they don't match.
Also fix some bugs that would only manifest when trying to return
index entries when attType is different from attLeafType. It's not
too surprising that these have not been reported, because the only
usual reason for such a difference is to store the leaf value
lossily, rendering index-only scans impossible.
Add a src/test/modules module to exercise cases where attType is
different from attLeafType and yet index-only scan is supported.
Discussion: https://postgr.es/m/3728741.1617381471@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
| |
When calling sort_expanded_ranges() we need to remember the return
value, because the function sorts and also deduplicates the ranges. So
the number of ranges may decrease. brin_minmax_multi_union failed to do
that, which resulted in crashes due to bogus ranges (equal minval/maxval
but not marked as compacted).
Reported-by: Jaime Casanova
Discussion: https://postgr.es/m/20210404052550.GA4376%40ahch-to
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The BRIN minmax-multi consistent function incorrectly assumed it can
lookup an operator, and then swap the arguments to get the commutator.
For example <(a,b) would be called as <(b,a) to get >(a,b). This works
when the arguments are of the same type, but with cross-type opclasses
this fails. We can't swap <(float4,float8) arguments, for example.
Fixed by passing arguments in the right order.
Discussion: https://postgr.es/m/CAJKUy5jLZFLCxyxfT%3DMfK5mtPfSzHA1rVLowR-j4RRsFVvKm7A%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
| |
The distance calculation ignored the mask, unlike the inet comparator,
which resulted in negative distance in some cases. Fixed by applying the
mask in brin_minmax_multi_distance_inet. I've considered simply calling
inetmi() to calculate the delta, but that does not consider mask either.
Reviewed-by: Zhihong Yu
Discussion: https://postgr.es/m/1a0a7b9d-9bda-e3a2-7fa4-88f15042a051%40enterprisedb.com
|
| |
|
|
|
|
|
|
|
| |
The distance calculation ignored the time zone, so the result of (b-a)
might have ended negative even if (b > a). Fixed by considering the time
zone difference.
Reported-by: Jaime Casanova
Discussion: https://postgr.es/m/CAJKUy5jLZFLCxyxfT%3DMfK5mtPfSzHA1rVLowR-j4RRsFVvKm7A%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The distance calculation for interval type was treating months as having
31 days, which is inconsistent with the interval comparator (using 30
days). Due to this it was possible to get negative distance (b-a) when
(a<b), trigerring an assert.
Fixed by adopting the same logic as interval_cmp_value.
Reported-by: Jaime Casanova
Discussion: https://postgr.es/m/CAJKUy5jKH0Xhneau2mNftNPtTy-BVgQfXc8zQkEvRvBHfeUThQ%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
pgstat_report_wait_start() and pgstat_report_wait_end() required two
conditional branches so far. One to check if MyProc is NULL, the other to
check if pgstat_track_activities is set. As wait events are used around
comparatively lightweight operations, and are inlined (reducing branch
predictor effectiveness), that's not great.
The dependency on MyProc has a second disadvantage: Low-level subsystems, like
storage/file/fd.c, report wait events, but architecturally it is preferable
for them to not depend on inter-process subsystems like proc.h (defining
PGPROC). After this change including pgstat.h (nor obviously its
sub-components like backend_status.h, wait_event.h, ...) does not pull in IPC
related headers anymore.
These goals, efficiency and abstraction, are achieved by having
pgstat_report_wait_start/end() not interact with MyProc, but instead a new
my_wait_event_info variable. At backend startup it points to a local variable,
removing the need to check for MyProc being NULL. During process
initialization my_wait_event_info is redirected to MyProc->wait_event_info. At
shutdown this is reversed. Because wait event reporting now does not need to
know about where the wait event is stored, it does not need to know about
PGPROC anymore.
The removal of the branch for checking pgstat_track_activities is simpler:
Don't check anymore. The cost due to the branch are often higher than the
store - and even if not, pgstat_track_activities is rarely disabled.
The main motivator to commit this work now is that removing the (indirect)
pgproc.h include from pgstat.h simplifies a patch to move statistics reporting
to shared memory (which still has a chance to get into 14).
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210402194458.2vu324hkk2djq6ce@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Backend status (supporting pg_stat_activity) and command
progress (supporting pg_stat_progress*) related code is largely
independent from the rest of pgstat.[ch] (supporting views like
pg_stat_all_tables that accumulate data over time). See also
a333476b925.
This commit doesn't rename the function names to make the distinction
from the rest of pgstat_ clearer - that'd be more invasive and not
clearly beneficial. If we were to decide to do such a rename at some
point, it's better done separately from moving the code as well.
Robert's review was of an earlier version.
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210316195440.twxmlov24rr2nxrg@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Similarly to the cryptohash implementations, this refactors the existing
HMAC code into a single set of APIs that can be plugged with any crypto
libraries PostgreSQL is built with (only OpenSSL currently). If there
is no such libraries, a fallback implementation is available. Those new
APIs are designed similarly to the existing cryptohash layer, so there
is no real new design here, with the same logic around buffer bound
checks and memory handling.
HMAC has a dependency on cryptohashes, so all the cryptohash types
supported by cryptohash{_openssl}.c can be used with HMAC. This
refactoring is an advantage mainly for SCRAM, that included its own
implementation of HMAC with SHA256 without relying on the existing
crypto libraries even if PostgreSQL was built with their support.
This code has been tested on Windows and Linux, with and without
OpenSSL, across all the versions supported on HEAD from 1.1.1 down to
1.0.1. I have also checked that the implementations are working fine
using some sample results, a custom extension of my own, and doing
cross-checks across different major versions with SCRAM with the client
and the backend.
Author: Michael Paquier
Reviewed-by: Bruce Momjian
Discussion: https://postgr.es/m/X9m0nkEJEzIPXjeZ@paquier.xyz
|
| |
|
|
|
|
|
|
| |
An upcoming patch might remove the (now indirect) proc.h
include (which in turn includes other headers), and it's cleaner for
the modified files to include their dependencies directly anyway...
Discussion: https://postgr.es/m/20210402194458.2vu324hkk2djq6ce@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The wait event related code is independent from the rest of the
pgstat.[ch] code, of nontrivial size and changes on a regular
basis. Put it into its own set of files.
As there doesn't seem to be a good pre-existing directory for code
like this, add src/backend/utils/activity.
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210316195440.twxmlov24rr2nxrg@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Testing if an unsigned variable is >= 0 is pretty pointless.
There's likely enough code in remove_cache_entry() to verify the cache
memory accounting is correct in assert enabled builds. These Asserts
were not adding much extra cover, even if they had been checking >= 0 on a
signed variable.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20210402204734.6mo3nfacnljlicgn@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Provide a new GUC check_client_connection_interval that can be used to
check whether the client connection has gone away, while running very
long queries. It is disabled by default.
For now this uses a non-standard Linux extension (also adopted by at
least one other OS). POLLRDHUP is not defined by POSIX, and other OSes
don't have a reliable way to know if a connection was closed without
actually trying to read or write.
In future we might consider trying to send a no-op/heartbeat message
instead, but that could require protocol changes.
Author: Sergey Cherkashin <s.cherkashin@postgrespro.ru>
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Reviewed-by: Konstantin Knizhnik <k.knizhnik@postgrespro.ru>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Maksim Milyutin <milyutinma@gmail.com>
Reviewed-by: Tsunakawa, Takayuki/綱川 貴之 <tsunakawa.takay@fujitsu.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (much earlier version)
Discussion: https://postgr.es/m/77def86b27e41f0efcba411460e929ae%40postgrespro.ru
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Commit dd136052b established a policy that error message FILE items
should include only the base name of the reporting source file, for
uniformity and succinctness. We now observe that some Windows compilers
use backslashes in __FILE__ strings, so truncate at backslashes as well.
This is expected to fix some platform variation in the results of the
new libpq_pipeline test module.
Discussion: https://postgr.es/m/3650140.1617372290@sss.pgh.pa.us
|
| |
|
|
|
| |
Author: Hou Zhijie <houzj.fnst@cn.fujitsu.com>
Discussion: https://www.postgresql.org/message-id/flat/7ea5ce773bbc4eea9ff1a381acd3b102@G08CNEXMBPEKD05.g08.fujitsu.local
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The caller of pgstat_report_replslot() passes int64 values to the function.
Also the function stores those values in PgStat_Counter (i.e., int64) fields
of PgStat_MsgReplSlot struct. But previously the function used "int" as
the data types of some arguments for those values, which could lead to
the overflow of values.
To avoid this risk, this commit fixes pgstat_report_replslot() to use
PgStat_Counter type for the arguments. Since they are the statistics counters,
PgStat_Counter, the data type used for counters, is used for them
instead of int64.
Reported-by: Vignesh C
Author: Vignesh C
Reviewed-by: Jeevan Ladhe, Fujii Masao
Discussion: https://postgr.es/m/CALDaNm080OpG=ZwOb0i8EyChH5SyHAMFWJCKaKTXmrfvJLbgaA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Here we add a new executor node type named "Result Cache". The planner
can include this node type in the plan to have the executor cache the
results from the inner side of parameterized nested loop joins. This
allows caching of tuples for sets of parameters so that in the event that
the node sees the same parameter values again, it can just return the
cached tuples instead of rescanning the inner side of the join all over
again. Internally, result cache uses a hash table in order to quickly
find tuples that have been previously cached.
For certain data sets, this can significantly improve the performance of
joins. The best cases for using this new node type are for join problems
where a large portion of the tuples from the inner side of the join have
no join partner on the outer side of the join. In such cases, hash join
would have to hash values that are never looked up, thus bloating the hash
table and possibly causing it to multi-batch. Merge joins would have to
skip over all of the unmatched rows. If we use a nested loop join with a
result cache, then we only cache tuples that have at least one join
partner on the outer side of the join. The benefits of using a
parameterized nested loop with a result cache increase when there are
fewer distinct values being looked up and the number of lookups of each
value is large. Also, hash probes to lookup the cache can be much faster
than the hash probe in a hash join as it's common that the result cache's
hash table is much smaller than the hash join's due to result cache only
caching useful tuples rather than all tuples from the inner side of the
join. This variation in hash probe performance is more significant when
the hash join's hash table no longer fits into the CPU's L3 cache, but the
result cache's hash table does. The apparent "random" access of hash
buckets with each hash probe can cause a poor L3 cache hit ratio for large
hash tables. Smaller hash tables generally perform better.
The hash table used for the cache limits itself to not exceeding work_mem
* hash_mem_multiplier in size. We maintain a dlist of keys for this cache
and when we're adding new tuples and realize we've exceeded the memory
budget, we evict cache entries starting with the least recently used ones
until we have enough memory to add the new tuples to the cache.
For parameterized nested loop joins, we now consider using one of these
result cache nodes in between the nested loop node and its inner node. We
determine when this might be useful based on cost, which is primarily
driven off of what the expected cache hit ratio will be. Estimating the
cache hit ratio relies on having good distinct estimates on the nested
loop's parameters.
For now, the planner will only consider using a result cache for
parameterized nested loop joins. This works for both normal joins and
also for LATERAL type joins to subqueries. It is possible to use this new
node for other uses in the future. For example, to cache results from
correlated subqueries. However, that's not done here due to some
difficulties obtaining a distinct estimation on the outer plan to
calculate the estimated cache hit ratio. Currently we plan the inner plan
before planning the outer plan so there is no good way to know if a result
cache would be useful or not since we can't estimate the number of times
the subplan will be called until the outer plan is generated.
The functionality being added here is newly introducing a dependency on
the return value of estimate_num_groups() during the join search.
Previously, during the join search, we only ever needed to perform
selectivity estimations. With this commit, we need to use
estimate_num_groups() in order to estimate what the hit ratio on the
result cache will be. In simple terms, if we expect 10 distinct values
and we expect 1000 outer rows, then we'll estimate the hit ratio to be
99%. Since cache hits are very cheap compared to scanning the underlying
nodes on the inner side of the nested loop join, then this will
significantly reduce the planner's cost for the join. However, it's
fairly easy to see here that things will go bad when estimate_num_groups()
incorrectly returns a value that's significantly lower than the actual
number of distinct values. If this happens then that may cause us to make
use of a nested loop join with a result cache instead of some other join
type, such as a merge or hash join. Our distinct estimations have been
known to be a source of trouble in the past, so the extra reliance on them
here could cause the planner to choose slower plans than it did previous
to having this feature. Distinct estimations are also fairly hard to
estimate accurately when several tables have been joined already or when a
WHERE clause filters out a set of values that are correlated to the
expressions we're estimating the number of distinct value for.
For now, the costing we perform during query planning for result caches
does put quite a bit of faith in the distinct estimations being accurate.
When these are accurate then we should generally see faster execution
times for plans containing a result cache. However, in the real world, we
may find that we need to either change the costings to put less trust in
the distinct estimations being accurate or perhaps even disable this
feature by default. There's always an element of risk when we teach the
query planner to do new tricks that it decides to use that new trick at
the wrong time and causes a regression. Users may opt to get the old
behavior by turning the feature off using the enable_resultcache GUC.
Currently, this is enabled by default. It remains to be seen if we'll
maintain that setting for the release.
Additionally, the name "Result Cache" is the best name I could think of
for this new node at the time I started writing the patch. Nobody seems
to strongly dislike the name. A few people did suggest other names but no
other name seemed to dominate in the brief discussion that there was about
names. Let's allow the beta period to see if the current name pleases
enough people. If there's some consensus on a better name, then we can
change it before the release. Please see the 2nd discussion link below
for the discussion on the "Result Cache" name.
Author: David Rowley
Reviewed-by: Andy Fan, Justin Pryzby, Zhihong Yu, Hou Zhijie
Tested-By: Konstantin Knizhnik
Discussion: https://postgr.es/m/CAApHDvrPcQyQdWERGYWx8J%2B2DLUNgXu%2BfOSbQ1UscxrunyXyrQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvq=yQXr5kqhRviT2RhNKwToaWr9JAN5t+5_PzhuRJ3wvg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The existing convention in SP-GiST is that any pass-by-value datatype
is stored in Datum representation, i.e. it's of width sizeof(Datum)
even when typlen is less than that. This is okay, or at least it's
too late to change it, for prefix datums and node-label datums in inner
(upper) tuples. But it's problematic for leaf datums, because we'd
prefer those to be stored in Postgres' standard on-disk representation
so that we can easily extend leaf tuples to carry additional "included"
columns.
I believe, however, that we can get away with just up and changing that.
This would be an unacceptable on-disk-format break, but there are two
big mitigating factors:
1. It seems quite unlikely that there are any SP-GiST opclasses out
there that use pass-by-value leaf datatypes. Certainly none of the
ones in core do, nor has codesearch.debian.net heard of any. Given
what SP-GiST is good for, it's hard to conceive of a use-case where
the leaf-level values would be both small and fixed-width. (As an
example, if you wanted to index text values with the leaf level being
just a byte, then every text string would have to be represented
with one level of inner tuple per preceding byte, which would be
horrendously space-inefficient and slow to access. You always want
to use as few inner-tuple levels as possible, leaving as much as
possible in the leaf values.)
2. Even granting that you have such an index, this change only
breaks things on big-endian machines. On little-endian, the high
order bytes of the Datum format will now just appear to be alignment
padding space.
So, change the code to store pass-by-value leaf datums in their
usual on-disk form. Inner-tuple datums are not touched.
This is extracted from a larger patch that intends to add support for
"included" columns. I'm committing it separately for visibility in
our commit logs.
Pavel Borisov and Tom Lane, reviewed by Andrey Borodin
Discussion: https://postgr.es/m/CALT9ZEFi-vMp4faht9f9Junb1nO3NOSjhpxTmbm1UGLMsLqiEQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The term 'default roles' wasn't quite apt as these roles aren't able to
be modified or removed after installation, so rename them to be
'Predefined Roles' instead, adding an entry into the newly added
Obsolete Appendix to help users of current releases find the new
documentation.
Bruce Momjian and Stephen Frost
Discussion: https://postgr.es/m/157742545062.1149.11052653770497832538%40wrigleys.postgresql.org
and https://www.postgresql.org/message-id/20201120211304.GG16415@tamriel.snowman.net
|
| |
|
|
|
|
|
|
|
|
| |
Through various refactorings over time, the extract(timezone_minute
from time with time zone) and extract(timezone_minute from timestamp
with time zone) implementations ended up with two different but
equally nonsensical formulas by using SECS_PER_MINUTE and
MINS_PER_HOUR interchangeably. Since those two are of course both the
same number, the formulas do work, but for readability, fix them to be
semantically correct.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This gives a small performance gain, by reducing the number of calls
to the conversion/verification function, and letting it work with
larger inputs. Also, reorganizing the input pipeline makes it easier
to parallelize the input parsing: after the input has been converted
to the database encoding, the next stage of finding the newlines can
be done in parallel, because there cannot be any newline chars
"embedded" in multi-byte characters in the encodings that we support
as server encodings.
This changes behavior in one corner case: if client and server
encodings are the same single-byte encoding (e.g. latin1), previously
the input would not be checked for zero bytes ('\0'). Any fields
containing zero bytes would be truncated at the zero. But if encoding
conversion was needed, the conversion routine would throw an error on
the zero. After this commit, the input is always checked for zeros.
Reviewed-by: John Naylor
Discussion: https://www.postgresql.org/message-id/e7861509-3960-538a-9025-b75a61188e01%40iki.fi
|
