| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some of the functions in regex compilation and execution recurse, and
therefore could in principle be driven to stack overflow. The Tcl crew
has seen this happen in practice in duptraverse(), though their fix was
to put in a hard-wired limit on the number of recursive levels, which is
not too appetizing --- fortunately, we have enough infrastructure to check
the actually available stack. Greg Stark has also seen it in other places
while fuzz testing on a machine with limited stack space. Let's put guards
in to prevent crashes in all these places.
Since the regex code would leak memory if we simply threw elog(ERROR),
we have to introduce an API that checks for stack depth without throwing
such an error. Fortunately that's not difficult.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In cfindloop(), if the initial call to shortest() reports that a
zero-length match is possible at the current search start point, but then
it is unable to construct any actual match to that, it'll just loop around
with the same start point, and thus make no progress. We need to force the
start point to be advanced. This is safe because the loop over "begin"
points has already tried and failed to match starting at "close", so there
is surely no need to try that again.
This bug was introduced in commit e2bd904955e2221eddf01110b1f25002de2aaa83,
wherein we allowed continued searching after we'd run out of match
possibilities, but evidently failed to think hard enough about exactly
where we needed to search next.
Because of the way this code works, such a match failure is only possible
in the presence of backrefs --- otherwise, shortest()'s judgment that a
match is possible should always be correct. That probably explains how
come the bug has escaped detection for several years.
The actual fix is a one-liner, but I took the trouble to add/improve some
comments related to the loop logic.
After fixing that, the submitted test case "()*\1" didn't loop anymore.
But it reported failure, though it seems like it ought to match a
zero-length string; both Tcl and Perl think it does. That seems to be from
overenthusiastic optimization on my part when I rewrote the iteration match
logic in commit 173e29aa5deefd9e71c183583ba37805c8102a72: we can't just
"declare victory" for a zero-length match without bothering to set match
data for capturing parens inside the iterator node.
Per fuzz testing by Greg Stark. The first part of this is a bug in all
supported branches, and the second part is a bug since 9.2 where the
iteration rewrite happened.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 9662143f0c35d64d7042fbeaf879df8f0b54be32 added infrastructure to
allow regular-expression operations to be terminated early in the event
of SIGINT etc. However, fuzz testing by Greg Stark disclosed that there
are still cases where regex compilation could run for a long time without
noticing a cancel request. Specifically, the fixempties() phase never
adds new states, only new arcs, so it doesn't hit the cancel check I'd put
in newstate(). Add one to newarc() as well to cover that.
Some experimentation of my own found that regex execution could also run
for a long time despite a pending cancel. We'd put a high-level cancel
check into cdissect(), but there was none inside the core text-matching
routines longest() and shortest(). Ordinarily those inner loops are very
very fast ... but in the presence of lookahead constraints, not so much.
As a compromise, stick a cancel check into the stateset cache-miss
function, which is enough to guarantee a cancel check at least once per
lookahead constraint test.
Making this work required more attention to error handling throughout the
regex executor. Henry Spencer had apparently originally intended longest()
and shortest() to be incapable of incurring errors while running, so
neither they nor their subroutines had well-defined error reporting
behaviors. However, that was already broken by the lookahead constraint
feature, since lacon() can surely suffer an out-of-memory failure ---
which, in the code as it stood, might never be reported to the user at all,
but just silently be treated as a non-match of the lookahead constraint.
Normalize all that by inserting explicit error tests as needed. I took the
opportunity to add some more comments to the code, too.
Back-patch to all supported branches, like the previous patch.
|
| |
|
|
| |
Bug noticed by Fujii Masao
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Module initialization was still not completely correct after commit
6b61955135e9, per crash report from Takashi Ohnishi. To fix, instead of
trying to monkey around with the value of the GUC setting directly, add
a separate boolean flag that enables the feature on a standby, but only
for the startup (recovery) process, when it sees that its master server
has the feature enabled.
Discussion: http://www.postgresql.org/message-id/ca44c6c7f9314868bdc521aea4f77cbf@MP-MSGSS-MBX004.msg.nttdata.co.jp
Also change the deactivation routine to delete all segment files rather
than leaving the last one around. (This doesn't need separate
WAL-logging, because on recovery we execute the same deactivation
routine anyway.)
In passing, clean up the code structure somewhat, particularly so that
xlog.c doesn't know so much about when to activate/deactivate the
feature.
Thanks to Fujii Masao for testing and Petr Jelínek for off-list discussion.
Back-patch to 9.5, where commit_ts was introduced.
|
| |
|
|
| |
Etsuro Fujita spotted a thinko in the README commentary.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If some existing listener is far behind, incoming new listener sessions
would start from that session's read pointer and then need to advance over
many already-committed notification messages, which they have no interest
in. This was expensive in itself and also thrashed the pg_notify SLRU
buffers a lot more than necessary. We can improve matters considerably
in typical scenarios, without much added cost, by starting from the
furthest-ahead read pointer, not the furthest-behind one. We do have to
consider only sessions in our own database when doing this, which requires
an extra field in the data structure, but that's a pretty small cost.
Back-patch to 9.0 where the current LISTEN/NOTIFY logic was introduced.
Matt Newell, slightly adjusted by me
|
| |
|
|
|
|
| |
If a transaction or subtransaction creates a ParallelContext but ends
without calling InitializeParallelDSM, the previous code would
seg fault. Fix that.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When considering which policies should be included, rather than look at
individual bits of the query (eg: if a RETURNING clause exists, or if a
WHERE clause exists which is referencing the table, or if it's a
FOR SHARE/UPDATE query), consider any case where we've determined
the user needs SELECT rights on the relation while doing an UPDATE or
DELETE to be a case where we apply SELECT policies, and any case where
we've deteremind that the user needs UPDATE rights on the relation while
doing a SELECT to be a case where we apply UPDATE policies.
This simplifies the logic and addresses concerns that a user could use
UPDATE or DELETE with a WHERE clauses to determine if rows exist, or
they could use SELECT .. FOR UPDATE to lock rows which they are not
actually allowed to modify through UPDATE policies.
Use list_append_unique() to avoid adding the same quals multiple times,
as, on balance, the cost of checking when adding the quals will almost
always be cheaper than keeping them and doing busywork for each tuple
during execution.
Back-patch to 9.5 where RLS was added.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are three main changes here:
1. No longer cause a start failure in a standby if the feature is
disabled in postgresql.conf but enabled in the master. This reverts one
part of commit 4f3924d9cd43; what we keep is the ability of the standby
to activate/deactivate the module (which includes creating and removing
segments as appropriate) during replay of such actions in the master.
2. Replay WAL records affecting commitTS even if the feature is
disabled. This means the standby will always have the same state as the
master after replay.
3. Have COMMIT PREPARE record the transaction commit time as well. We
were previously only applying it in the normal transaction commit path.
Author: Petr Jelínek
Discussion: http://www.postgresql.org/message-id/CAHGQGwHereDzzzmfxEBYcVQu3oZv6vZcgu1TPeERWbDc+gQ06g@mail.gmail.com
Discussion: http://www.postgresql.org/message-id/CAHGQGwFuzfO4JscM9LCAmCDCxp_MfLvN4QdB+xWsS-FijbjTYQ@mail.gmail.com
Additionally, I cleaned up nearby code related to replication origins,
which I found a bit hard to follow, and fixed a couple of typos.
Backpatch to 9.5, where this code was introduced.
Per bug reports from Fujii Masao and subsequent discussion.
|
| |
|
|
| |
Etsuro Fujita
|
| |
|
|
|
|
|
| |
It was introduced alongside replication origins, by commit
5aa2350426c, so backpatch to 9.5.
Pointed out by Fujii Masao
|
| |
|
|
|
|
|
|
|
|
| |
When taking the UPDATE path in an INSERT .. ON CONFLICT .. UPDATE tables
with oids were not supported. The tuple generated by the update target
list was projected without space for an oid - a simple oversight.
Reported-By: Peter Geoghegan
Author: Andres Freund
Backpatch: 9.5, where ON CONFLICT was introduced
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
In 9.5 and master there is no need to support legacy truncation. This is
just committed separately to make it easier to backpatch the WAL logged
multixact truncation to 9.3 and 9.4 if we later decide to do so.
I bumped master's magic from 0xD086 to 0xD088 and 9.5's from 0xD085 to
0xD087 to avoid 9.5 reusing a value that has been in use on master while
keeping the numbers increasing between major versions.
Discussion: 20150621192409.GA4797@alap3.anarazel.de
Backpatch: 9.5
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The fact that multixact truncations are not WAL logged has caused a fair
share of problems. Amongst others it requires to do computations during
recovery while the database is not in a consistent state, delaying
truncations till checkpoints, and handling members being truncated, but
offset not.
We tried to put bandaids on lots of these issues over the last years,
but it seems time to change course. Thus this patch introduces WAL
logging for multixact truncations.
This allows:
1) to perform the truncation directly during VACUUM, instead of delaying it
to the checkpoint.
2) to avoid looking at the offsets SLRU for truncation during recovery,
we can just use the master's values.
3) simplify a fair amount of logic to keep in memory limits straight,
this has gotten much easier
During the course of fixing this a bunch of additional bugs had to be
fixed:
1) Data was not purged from memory the member's SLRU before deleting
segments. This happened to be hard or impossible to hit due to the
interlock between checkpoints and truncation.
2) find_multixact_start() relied on SimpleLruDoesPhysicalPageExist - but
that doesn't work for offsets that haven't yet been flushed to
disk. Add code to flush the SLRUs to fix. Not pretty, but it feels
slightly safer to only make decisions based on actual on-disk state.
3) find_multixact_start() could be called concurrently with a truncation
and thus fail. Via SetOffsetVacuumLimit() that could lead to a round
of emergency vacuuming. The problem remains in
pg_get_multixact_members(), but that's quite harmless.
For now this is going to only get applied to 9.5+, leaving the issues in
the older branches in place. It is quite possible that we need to
backpatch at a later point though.
For the case this gets backpatched we need to handle that an updated
standby may be replaying WAL from a not-yet upgraded primary. We have to
recognize that situation and use "old style" truncation (i.e. looking at
the SLRUs) during WAL replay. In contrast to before, this now happens in
the startup process, when replaying a checkpoint record, instead of the
checkpointer. Doing truncation in the restartpoint is incorrect, they
can happen much later than the original checkpoint, thereby leading to
wraparound. To avoid "multixact_redo: unknown op code 48" errors
standbys would have to be upgraded before primaries.
A later patch will bump the WAL page magic, and remove the legacy
truncation codepaths. Legacy truncation support is just included to make
a possible future backpatch easier.
Discussion: 20150621192409.GA4797@alap3.anarazel.de
Reviewed-By: Robert Haas, Alvaro Herrera, Thomas Munro
Backpatch: 9.5 for now
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This replaces ill-fated commit 5ddc72887a012f6a8b85707ef27d85c274faf53d,
which was reverted because it broke active uses of FK cache entries. In
this patch, we still do nothing more to invalidatable cache entries than
mark them as needing revalidation, so we won't break active uses. To keep
down the overhead of InvalidateConstraintCacheCallBack(), keep a list of
just the currently-valid cache entries. (The entries are large enough that
some added space for list links doesn't seem like a big problem.) This
would still be O(N^2) when there are many valid entries, though, so when
the list gets too long, just force the "sinval reset" behavior to remove
everything from the list. I set the threshold at 1000 entries, somewhat
arbitrarily. Possibly that could be fine-tuned later. Another item for
future study is whether it's worth adding reference counting so that we
could safely remove invalidated entries. As-is, problem cases are likely
to end up with large and mostly invalid FK caches.
Like the previous attempt, backpatch to 9.3.
Jan Wieck and Tom Lane
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, a function call appearing at the top level of WHERE had a
hard-wired selectivity estimate of 0.3333333, a kludge conveniently dated
in the source code itself to July 1992. The expectation at the time was
that somebody would soon implement estimator support functions analogous
to those for operators; but no such code has appeared, nor does it seem
likely to in the near future. We do have an alternative solution though,
at least for immutable functions on single relations: creating an
expression index on the function call will allow ANALYZE to gather stats
about the function's selectivity. But the code in clause_selectivity()
failed to make use of such data even if it exists.
Refactor so that that will happen. I chose to make it try this technique
for any clause type for which clause_selectivity() doesn't have a special
case, not just functions. To avoid adding unnecessary overhead in the
common case where we don't learn anything new, make selfuncs.c provide an
API that hooks directly to examine_variable() and then var_eq_const(),
rather than the previous coding which laboriously constructed an OpExpr
only so that it could be expensively deconstructed again.
I preserved the behavior that the default estimate for a function call
is 0.3333333. (For any other expression node type, it's 0.5, as before.)
I had originally thought to make the default be 0.5 across the board, but
changing a default estimate that's survived for twenty-three years seems
like something not to do without a lot more testing than I care to put
into it right now.
Per a complaint from Jehan-Guillaume de Rorthais. Back-patch into 9.5,
but not further, at least for the moment.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The old minimum values are rather large, making it time consuming to
test related behaviour. Additionally the current limits, especially for
multixacts, can be problematic in space-constrained systems. 10000000
multixacts can contain a lot of members.
Since there's no good reason for the current limits, lower them a good
bit. Setting them to 0 would be a bad idea, triggering endless vacuums,
so still retain a limit.
While at it fix autovacuum_multixact_freeze_max_age to refer to
multixact.c instead of varsup.c.
Reviewed-By: Robert Haas
Discussion: CA+TgmoYmQPHcrc3GSs7vwvrbTkbcGD9Gik=OztbDGGrovkkEzQ@mail.gmail.com
Backpatch: back to 9.0 (in parts)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, ANALYZE simply ignored columns of datatypes that have neither
a btree nor hash opclass (which means they have no recognized equality
operator). Without a notion of equality, we can't identify most-common
values nor estimate the number of distinct values. But we can still
count nulls and compute the average physical column width, and those
stats might be of value. Moreover there are some tools out there that
don't work so well if rows are missing from pg_statistic. So let's
add suitable logic for this case.
While this is arguably a bug fix, it also has the potential to change
query plans, and the gain seems not worth taking a risk of that in
stable branches. So back-patch into 9.5 but not further.
Oleksandr Shulgin, rewritten a bit by me.
|
| |
|
|
|
|
|
|
|
| |
The previous wrong value lead to wrong LOCK_DEBUG output, never showing
any shared lock holders.
Reported-By: Alexander Korotkov
Discussion: CAPpHfdsPmWqz9FB0AnxJrwp1=KLF0n=-iB+QvR0Q8GSmpFVdUQ@mail.gmail.com
Backpatch: 9.5, where the bug was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
mul_var() postpones propagating carries until it risks overflow in its
internal digit array. However, the logic failed to account for the
possibility of overflow in the carry propagation step, allowing wrong
results to be generated in corner cases. We must slightly reduce the
when-to-propagate-carries threshold to avoid that.
Discovered and fixed by Dean Rasheed, with small adjustments by me.
This has been wrong since commit d72f6c75038d8d37e64a29a04b911f728044d83b,
so back-patch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
| |
This commit's parent made superfluous the bit's sole usage. Referential
integrity checks have long run as the subject table's owner, and that
now implies RLS bypass. Safe use of the bit was tricky, requiring
strict control over the SQL expressions evaluating therein. Back-patch
to 9.5, where the bit was introduced.
Based on a patch by Stephen Frost.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Every query of a single ENABLE ROW SECURITY table has two meanings, with
the row_security GUC selecting between them. With row_security=force
available, every function author would have been advised to either set
the GUC locally or test both meanings. Non-compliance would have
threatened reliability and, for SECURITY DEFINER functions, security.
Authors already face an obligation to account for search_path, and we
should not mimic that example. With this change, only BYPASSRLS roles
need exercise the aforementioned care. Back-patch to 9.5, where the
row_security GUC was introduced.
Since this narrows the domain of pg_db_role_setting.setconfig and
pg_proc.proconfig, one might bump catversion. A row_security=force
setting in one of those columns will elicit a clear message, so don't.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
RemoveLocalLock() must consider the possibility that LockAcquireExtended()
failed to palloc the initial space for a locallock's lockOwners array.
I had evidently meant to cope with this hazard when the code was originally
written (commit 1785acebf2ed14fd66955e2d9a55d77a025f418d), but missed that
the pfree needed to be protected with an if-test. Just to make sure things
are left in a clean state, reset numLockOwners as well.
Per low-memory testing by Andreas Seltenreich. Back-patch to all supported
branches.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
These functions have been looking up type info for every row they
process. Instead of doing that we only look them up the first time
through and stash the information in the aggregate state object.
Affects json_agg, json_object_agg, jsonb_agg and jsonb_object_agg.
There is plenty more work to do in making these more efficient,
especially the jsonb functions, but this is a virtually cost free
improvement that can be done right away.
Backpatch to 9.5 where the jsonb variants were introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After an internal failure in shortest() or longest() while pinning down the
exact location of a match, find() forgot to free the DFA structure before
returning. This is pretty unlikely to occur, since we just successfully
ran the "search" variant of the DFA; but it could happen, and it would
result in a session-lifespan memory leak since this code uses malloc()
directly. Problem seems to have been aboriginal in Spencer's library,
so back-patch all the way.
In passing, correct a thinko in a comment I added awhile back about the
meaning of the "ntree" field.
I happened across these issues while comparing our code to Tcl's version
of the library.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
For the UPDATE/DELETE RETURNING case, filter the records which are not
visible to the user through ALL or SELECT policies from those considered
for the UPDATE or DELETE. This is similar to how the GRANT system
works, which prevents RETURNING unless the caller has SELECT rights on
the relation.
Per discussion with Robert, Dean, Tom, and Kevin.
Back-patch to 9.5 where RLS was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This refactors rewrite/rowsecurity.c to simplify the handling of the
default deny case (reducing the number of places where we check for and
add the default deny policy from three to one) by splitting up the
retrival of the policies from the application of them.
This also allowed us to do away with the policy_id field. A policy_name
field was added for WithCheckOption policies and is used in error
reporting, when available.
Patch by Dean Rasheed, with various mostly cosmetic changes by me.
Back-patch to 9.5 where RLS was introduced to avoid unnecessary
differences, since we're still in alpha, per discussion with Robert.
|
| |
|
|
|
|
|
|
| |
Commit 5ddc72887a012f6a8b85707ef27d85c274faf53d does not actually work
because it will happily blow away ri_constraint_cache entries that are
in active use in outer call levels. In any case, it's a very ugly,
brute-force solution to the problem of limiting the cache size.
Revert until it can be redesigned.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch changes the log message which is logged when the server
successfully renames backup_label file to *.old but fails to rename
tablespace_map file during the shutdown. Previously the WARNING
message "online backup mode was not canceled" was logged in that case.
However this message is confusing because the backup mode is treated
as canceled whenever backup_label is successfully renamed. So this
commit makes the server log the message "online backup mode canceled"
in that case.
Also this commit changes errdetail messages so that they follow the
error message style guide.
Back-patch to 9.5 where tablespace_map file is introduced.
Original patch by Amit Kapila, heavily modified by me.
|
| |
|
|
|
|
|
|
|
|
|
| |
To prevent perverse results, we now only return the other operand if
it's not scalar, and if both operands are of the same kind (array or
object).
Original bug complaint and patch from Oskari Saarenmaa, extended by me
to cover the cases of different kinds of jsonb.
Backpatch to 9.5 where jsonb_concat was introduced.
|
| | |
|
| |
|
|
|
|
|
|
| |
I think this particular branch is actually dead, but the analysis to
prove that is not trivial, so instead take the weasel way.
Reported by Jinyu Zhang
Backpatch to 9.5, where BRIN was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 45ba424f improved foreign key lookups during bulk updates
when the FK value does not change. When restoring a schema dump
from a database with many (say 100,000) foreign keys, this cache
would grow very big and every ALTER TABLE command was causing an
InvalidateConstraintCacheCallBack(), which uses a sequential hash
table scan. This could cause a severe performance regression in
restoring a schema dump (including during pg_upgrade).
The patch uses a heuristic method of detecting when the hash table
should be destroyed and recreated.
InvalidateConstraintCacheCallBack() adds the current size of the
hash table to a counter. When that sum reaches 1,000,000, the hash
table is flushed. This fixes the regression without noticeable
harm to the bulk update use case.
Jan Wieck
Backpatch to 9.3 where the performance regression was introduced.
|
| |
|
|
|
|
|
|
| |
The "typo" alleged in commit 1e460d4bd was actually a comment that was
correct when written, but I missed updating it in commit b5282aa89.
Use a slightly less specific (and hopefully more future-proof) description
of what is collected. Back-patch to 9.2 where that commit appeared, and
revert the comment to its then-entirely-correct state before that.
|
| |
|
|
|
|
|
|
| |
We're adding OIDs, not TIDs, to invalItems.
Pointed out by Etsuro Fujita.
Back-patch to all supported branches.
|
| |
|
|
|
|
|
|
| |
The list-wrangling here was done wrong, allowing the same state to get
put into the list twice. The following loop then would clone it twice.
The second clone would wind up with no inarcs, so that there was no
observable misbehavior AFAICT, but a useless state in the finished NFA
isn't an especially good thing.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit makes postmaster forcibly remove the files signaling
a standby promotion request. Otherwise, the existence of those files
can trigger a promotion too early, whether a user wants that or not.
This removal of files is usually unnecessary because they can exist
only during a few moments during a standby promotion. However
there is a race condition: if pg_ctl promote is executed and creates
the files during a promotion, the files can stay around even after
the server is brought up to new master. Then, if new standby starts
by using the backup taken from that master, the files can exist
at the server startup and should be removed in order to avoid
an unexpected promotion.
Back-patch to 9.1 where promote signal file was introduced.
Problem reported by Feike Steenbergen.
Original patch by Michael Paquier, modified by me.
Discussion: 20150528100705.4686.91426@wrigleys.postgresql.org
|
| |
|
|
|
|
|
|
|
|
| |
Even views considered "simple" enough to be automatically updatable may
have mulitple relations involved (eg: in a where clause). We need to
make sure and lock those relations when rewriting the query.
Back-patch to 9.3 where updatable views were added.
Pointed out by Andres, patch thanks to Dean Rasheed.
|
| |
|
|
|
|
|
| |
This was forgotten in 8a3631f (commit that originally added the parameter)
and 0ca9907 (commit that added the documentation later that year).
Back-patch to all supported versions.
|
| |
|
|
|
|
|
|
|
|
|
| |
Cleanup process could be called by ordinary insert/update and could take a lot
of time. Add vacuum_delay_point() to make this process interruptable. Under
vacuum this call will also throttle a vacuum process to decrease system load,
called from insert/update it will not throttle, and that reduces a latency.
Backpatch for all supported branches.
Jeff Janes <jeff.janes@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
RESERV. RESERV is meant for tokens like "now" and having them in that
category throws errors like these when used as an input date:
stark=# SELECT 'doy'::timestamptz;
ERROR: unexpected dtype 33 while parsing timestamptz "doy"
LINE 1: SELECT 'doy'::timestamptz;
^
stark=# SELECT 'dow'::timestamptz;
ERROR: unexpected dtype 32 while parsing timestamptz "dow"
LINE 1: SELECT 'dow'::timestamptz;
^
Found by LLVM's Libfuzzer
|
| |
|
|
|
|
|
|
|
| |
This has been broken since 9.3 (commit 82b1b213cad3a69c to be exact),
which suggests that nobody is any longer using a Windows build system that
doesn't provide a symlink emulation. Still, it's wrong on its own terms,
so repair.
YUriy Zhuravlev
|
| |
|
|
| |
Oskari Saarenmaa. Backpatch to stable branches where applicable.
|
| |
|
|
|
|
|
|
|
|
|
| |
If the number of heap blocks is not multiples of pages per range, the
summarizing produces wrong summary information for the last brin index
tuple while vacuuming.
Problem reported by Tatsuo Ishii and fixed by Amit Langote.
Discussion at "[HACKERS] BRIN INDEX value (message id :20150903.174935.1946402199422994347.t-ishii@sraoss.co.jp)
Backpatched to 9.5 in which brin index was added.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Formerly, we treated only portals created in the current subtransaction as
having failed during subtransaction abort. However, if the error occurred
while running a portal created in an outer subtransaction (ie, a cursor
declared before the last savepoint), that has to be considered broken too.
To allow reliable detection of which ones those are, add a bookkeeping
field to struct Portal that tracks the innermost subtransaction in which
each portal has actually been executed. (Without this, we'd end up
failing portals containing functions that had called the subtransaction,
thereby breaking plpgsql exception blocks completely.)
In addition, when we fail an outer-subtransaction Portal, transfer its
resources into the subtransaction's resource owner, so that they're
released early in cleanup of the subxact. This fixes a problem reported by
Jim Nasby in which a function executed in an outer-subtransaction cursor
could cause an Assert failure or crash by referencing a relation created
within the inner subtransaction.
The proximate cause of the Assert failure is that AtEOSubXact_RelationCache
assumed it could blow away a relcache entry without first checking that the
entry had zero refcount. That was a bad idea on its own terms, so add such
a check there, and to the similar coding in AtEOXact_RelationCache. This
provides an independent safety measure in case there are still ways to
provoke the situation despite the Portal-level changes.
This has been broken since subtransactions were invented, so back-patch
to all supported branches.
Tom Lane and Michael Paquier
|
| |
|
|
|
|
|
|
|
| |
The setting values of some parameters including max_worker_processes
must be equal to or higher than the values on the master. However,
previously max_worker_processes was not listed as such parameter
in the document. So this commit adds it to that list.
Back-patch to 9.4 where max_worker_processes was added.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, if one background worker registered another background
worker and set bgw_notify_pid while for the second background worker,
it would not receive notifications from the postmaster unless, at the
time the "parent" was registered, BGWORKER_BACKEND_DATABASE_CONNECTION
was set.
To fix, instead instead of including only those background workers that
requested database connections in the postmater's BackendList, include
them all. There doesn't seem to be any reason not do this, and indeed
it removes a significant amount of duplicated code. The other option
is to make PostmasterMarkPIDForWorkerNotify look at BackgroundWorkerList
in addition to BackendList, but that adds more code duplication instead
of getting rid of it.
Patch by me. Review and testing by Ashutosh Bapat.
|
