| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
I originally modeled this data structure on SpecialJoinInfo, but after
commit acfcd45cacb6df23 that looks like a pretty poor decision.
All we really need is relid sets identifying laterally-referenced rels;
and most of the time, what we want to know about includes indirect lateral
references, a case the LateralJoinInfo data was unsuited to compute with
any efficiency. The previous commit redefined RelOptInfo.lateral_relids
as the transitive closure of lateral references, so that it easily supports
checking indirect references. For the places where we really do want just
direct references, add a new RelOptInfo field direct_lateral_relids, which
is easily set up as a copy of lateral_relids before we perform the
transitive closure calculation. Then we can just drop lateral_info_list
and LateralJoinInfo and the supporting code. This makes the planner's
handling of lateral references noticeably more efficient, and shorter too.
Such a change can't be back-patched into stable branches for fear of
breaking extensions that might be looking at the planner's data structures;
but it seems not too late to push it into 9.5, so I've done so.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
ALTER POLICY hadn't fully considered partial policy alternation
(eg: change just the roles on the policy, or just change one of
the expressions) when rebuilding the dependencies. Instead, it
would happily remove all dependencies which existed for the
policy and then only recreate the dependencies for the objects
referred to in the specific ALTER POLICY command.
Correct that by extracting and building the dependencies for all
objects referenced by the policy, regardless of if they were
provided as part of the ALTER POLICY command or were already in
place as part of the pre-existing policy.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
More fuzz testing by Andreas Seltenreich exposed that the planner did not
cope well with chains of lateral references. If relation X references Y
laterally, and Y references Z laterally, then we will have to scan X on the
inside of a nestloop with Z, so for all intents and purposes X is laterally
dependent on Z too. The planner did not understand this and would generate
intermediate joins that could not be used. While that was usually harmless
except for wasting some planning cycles, under the right circumstances it
would lead to "failed to build any N-way joins" or "could not devise a
query plan" planner failures.
To fix that, convert the existing per-relation lateral_relids and
lateral_referencers relid sets into their transitive closures; that is,
they now show all relations on which a rel is directly or indirectly
laterally dependent. This not only fixes the chained-reference problem
but allows some of the relevant tests to be made substantially simpler
and faster, since they can be reduced to simple bitmap manipulations
instead of searches of the LateralJoinInfo list.
Also, when a PlaceHolderVar that is due to be evaluated at a join contains
lateral references, we should treat those references as indirect lateral
dependencies of each of the join's base relations. This prevents us from
trying to join any individual base relations to the lateral reference
source before the join is formed, which again cannot work.
Andreas' testing also exposed another oversight in the "dangerous
PlaceHolderVar" test added in commit 85e5e222b1dd02f1. Simply rejecting
unsafe join paths in joinpath.c is insufficient, because in some cases
we will end up rejecting *all* possible paths for a particular join, again
leading to "could not devise a query plan" failures. The restriction has
to be known also to join_is_legal and its cohort functions, so that they
will not select a join for which that will happen. I chose to move the
supporting logic into joinrels.c where the latter functions are.
Back-patch to 9.3 where LATERAL support was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This module needs explicit initialization in order to replay WAL records
in recovery, but we had broken this recently following changes to make
other (stranger) scenarios work correctly. To fix, rework the
initialization sequence so that it always takes place before WAL replay
commences for both master and standby.
I could have gone for a more localized fix that just added a "startup"
call for the master server, but it seemed better to restructure the
existing callers as well so that the whole thing made more sense. As a
drawback, there is more control logic in xlog.c now than previously, but
doing otherwise meant passing down the ControlFile flag, which seemed
uglier as a whole.
This also meant adding a check to not re-execute ActivateCommitTs if it
had already been called.
Reported by Fujii Masao.
Backpatch to 9.5.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ExecOnConflictUpdate() passed t_ctid of the to-be-updated tuple to
ExecUpdate(). That's problematic primarily because of two reason: First
and foremost t_ctid could point to a different tuple. Secondly, and
that's what triggered the complaint by Stanislav, t_ctid is changed by
heap_update() to point to the new tuple version. The behavior of AFTER
UPDATE triggers was therefore broken, with NEW.* and OLD.* tuples
spuriously identical within AFTER UPDATE triggers.
To fix both issues, pass a pointer to t_self of a on-stack HeapTuple
instead.
Fixing this bug lead to one change in regression tests, which previously
failed due to the first issue mentioned above. There's a reasonable
expectation that test fails, as it updates one row repeatedly within one
INSERT ... ON CONFLICT statement. That is only possible if the second
update is triggered via ON CONFLICT ... SET, ON CONFLICT ... WHERE, or
by a WITH CHECK expression, as those are executed after
ExecOnConflictUpdate() does a visibility check. That could easily be
prohibited, but given it's allowed for plain UPDATEs and a rare corner
case, it doesn't seem worthwhile.
Reported-By: Stanislav Grozev
Author: Andres Freund and Peter Geoghegan
Discussion: CAA78GVqy1+LisN-8DygekD_Ldfy=BJLarSpjGhytOsgkpMavfQ@mail.gmail.com
Backpatch: 9.5, where ON CONFLICT was introduced
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
At the end of crash recovery, unlogged relations are reset to the empty
state, using their init fork as the template. The init fork is copied to
the main fork without going through shared buffers. Unfortunately WAL
replay so far has not necessarily flushed writes from shared buffers to
disk at that point. In normal crash recovery, and before the
introduction of 'fast promotions' in fd4ced523 / 9.3, the
END_OF_RECOVERY checkpoint flushes the buffers out in time. But with
fast promotions that's not the case anymore.
To fix, force WAL writes targeting the init fork to be flushed
immediately (using the new FlushOneBuffer() function). In 9.5+ that
flush can centrally be triggered from the code dealing with restoring
full page writes (XLogReadBufferForRedoExtended), in earlier releases
that responsibility is in the hands of XLOG_HEAP_NEWPAGE's replay
function.
Backpatch to 9.1, even if this currently is only known to trigger in
9.3+. Flushing earlier is more robust, and it is advantageous to keep
the branches similar.
Typical symptoms of this bug are errors like
'ERROR: index "..." contains unexpected zero page at block 0'
shortly after promoting a node.
Reported-By: Thom Brown
Author: Andres Freund and Michael Paquier
Discussion: 20150326175024.GJ451@alap3.anarazel.de
Backpatch: 9.1-
|
| |
|
|
|
|
|
|
|
|
|
| |
The original parallel sequential scan commit included only very limited
changes to the EXPLAIN output. Aggregated totals from all workers were
displayed, but there was no way to see what each individual worker did
or to distinguish the effort made by the workers from the effort made by
the leader.
Per a gripe by Thom Brown (and maybe others). Patch by me, reviewed
by Amit Kapila.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The single linked list of memory contexts could result in O(N^2)
performance to free a set of contexts if they were not freed in
reverse order of creation. In many cases the reverse order was
used, but there were some significant exceptions that caused real-
world performance problems. Rather than requiring all callers to
care about the order in which contexts were freed, and hunting down
and changing all existing cases where the wrong order was used, we
add one pointer per memory context so that the implementation
details are not so visible.
Jan Wieck
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit e7cb7ee14555cc9c5773e2c102efd6371f6f2005 provided basic
infrastructure for allowing a foreign data wrapper or custom scan
provider to replace a join of one or more tables with a scan.
However, this infrastructure failed to take into account the need
for possible EvalPlanQual rechecks, and ExecScanFetch would fail
an assertion (or just overwrite memory) if such a check was attempted
for a plan containing a pushed-down join. To fix, adjust the EPQ
machinery to skip some processing steps when scanrelid == 0, making
those the responsibility of scan's recheck method, which also has
the responsibility in this case of correctly populating the relevant
slot.
To allow foreign scans to gain control in the right place to make
use of this new facility, add a new, optional RecheckForeignScan
method. Also, allow a foreign scan to have a child plan, which can
be used to correctly populate the slot (or perhaps for something
else, but this is the only use currently envisioned).
KaiGai Kohei, reviewed by Robert Haas, Etsuro Fujita, and Kyotaro
Horiguchi.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While convincing myself that commit 7e19db0c09719d79 would solve both of
the problems recently reported by Andreas Seltenreich, I realized that
add_paths_to_joinrel's handling of LATERAL restrictions could be made
noticeably simpler and faster if we were to retain the minimum possible
parameterization for each joinrel (that is, the set of relids supplying
unsatisfied lateral references in it). We already retain that for
baserels, in RelOptInfo.lateral_relids, so we can use that field for
joinrels too.
I re-pgindent'd the files touched here, which affects some unrelated
comments.
This is, I believe, just a minor optimization not a bug fix, so no
back-patch.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It was possible for the planner to decide to join a LATERAL subquery to
the outer side of an outer join before the outer join itself is completed.
Normally that's fine because of the associativity rules, but it doesn't
work if the subquery contains a lateral reference to the inner side of the
outer join. In such a situation the outer join *must* be done first.
join_is_legal() missed this consideration and would allow the join to be
attempted, but the actual path-building code correctly decided that no
valid join path could be made, sometimes leading to planner errors such as
"failed to build any N-way joins".
Per report from Andreas Seltenreich. Back-patch to 9.3 where LATERAL
support was added.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As pointed out by Fujii Masao, we weren't quite there on a standby
behaving sanely: first because we were failing to acquire the correct
state in the case where no XLOG_PARAMETER_CHANGE message was sent
(because a checkpoint had already happened after the setting was changed
in the master, and then the standby was restarted); and second because
promoting the standby with the feature enabled failed to activate it if
the master had the feature disabled.
This patch fixes both those misbehaviors hopefully without
re-introducing any old problems.
Also change the hint emitted in a standby together with the error
message about the feature being disabled, to make it point out that the
place to chance the setting is the master. Otherwise, if the setting is
already enabled in the standby, it is very confusing to have it say that
the setting must be enabled ...
Authors: Álvaro Herrera, Petr Jelínek.
Backpatch to 9.5.
|
| |
|
|
| |
Peter Geoghegan
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We tried to fetch statistics data from the index metapage, which does not
work if the index isn't actually present. If the index is hypothetical,
instead extrapolate some plausible internal statistics based on the index
page count provided by the index-advisor plugin.
There was already some code in gincostestimate() to invent internal stats
in this way, but since it was only meant as a stopgap for pre-9.1 GIN
indexes that hadn't been vacuumed since upgrading, it was pretty crude.
If we want it to support index advisors, we should try a little harder.
A small amount of testing says that it's better to estimate the entry pages
as 90% of the index, not 100%. Also, estimating the number of entries
(keys) as equal to the heap tuple count could be wildly wrong in either
direction. Instead, let's estimate 100 entries per entry page.
Perhaps someday somebody will want the index advisor to be able to provide
these numbers more directly, but for the moment this should serve.
Problem report and initial patch by Julien Rouhaud; modified by me to
invent less-bogus internal statistics. Back-patch to all supported
branches, since we've supported index advisors since 9.0.
|
| |
|
|
|
|
| |
It's amazing how fast things become obsolete these days.
Amit Langote
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit 8abb3cda0ddc00a0ab98977a1633a95b97068d4e I attempted to cache
the expression state trees constructed for domain CHECK constraints for
the life of the backend (assuming the domain's constraints don't get
redefined). However, this turns out not to work very well, because
execQual.c will run those state trees with ecxt_per_query_memory pointing
to a query-lifespan context, and in some situations we'll end up with
pointers into that context getting stored into the state trees. This
happens in particular with SQL-language functions, as reported by
Emre Hasegeli, but there are many other cases.
To fix, keep only the expression plan trees for domain CHECK constraints
in the typcache's data structure, and revert to performing ExecInitExpr
(at least) once per query to set up expression state trees in the query's
context.
Eventually it'd be nice to undo this, but that will require some careful
thought about memory management for expression state trees, and it seems
far too late for any such redesign in 9.5. This way is still much more
efficient than what happened before 8abb3cda0.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, we did many conversions for Cyrillic and Central European
single-byte encodings by converting to a related MULE_INTERNAL coding
scheme before converting to the destination. This seems unnecessarily
inefficient. Moreover, if the conversion encounters an untranslatable
character, the error message will confusingly complain about failure
to convert to or from MULE_INTERNAL, rather than the user-visible
encodings. Worse still, this approach results in some completely
unnecessary conversion failures; there are cases where the chosen
MULE subset lacks characters that exist in both of the user-visible
encodings, causing a conversion failure that need not occur.
This patch fixes the first two of those deficiencies by introducing
a new local2local() conversion support subroutine for direct conversion
between any two single-byte character sets, and adding new conversion
tables where needed. However, I generated the new conversion tables by
testing PG 9.5's behavior, so that the actual conversion behavior is
bug-compatible with previous releases; the only user-visible behavior
change is that the error messages for conversion failures are saner.
Changes in the conversion behavior will probably ensue after discussion.
Interestingly, although this approach requires more tables, the .so files
actually end up smaller (at least on my x86_64 machine); the tables are
smaller than the management code needed for double conversion.
Per a complaint from Albe Laurenz.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some of the Unicode/*.map files had identification comments added to them,
evidently by hand. Others did not. Modify the generating scripts to
produce these comments automatically, and update the generated files that
lacked them.
This is just minor cleanup as a by-product of trying to verify that the
*.map files can indeed be reproduced from authoritative data. There are a
depressingly large number that fail to reproduce from the claimed sources.
I have not touched those in this commit, except for the JIS 2004-related
files which required only a single comment update to match.
Since this only affects comments, no need to consider a back-patch.
|
| |
|
|
|
|
|
| |
Attached is a patch for being able to do COPY (query) without a CTE.
Author: Marko Tiikkaja
Review: Michael Paquier
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Failure to initially palloc the comboCids array, or to realloc it bigger
when needed, left combocid's data structures in an inconsistent state that
would cause trouble if the top transaction continues to execute. Noted
while examining a user complaint about the amount of memory used for this.
(There's not much we can do about that, but it does point up that repalloc
failure has a non-negligible chance of occurring here.)
In HEAD/9.5, also avoid possible invocation of memcpy() with a null pointer
in SerializeComboCIDState; cf commit 13bba0227.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The integer overflow situation in div_var_fast() is a great deal more
complicated than the pre-existing comments would suggest. Moreover, the
comments were also flat out incorrect as to the precise statement of the
maxdiv loop invariant. Upon clarifying that, it becomes apparent that the
way in which we updated maxdiv after a carry propagation pass was overly
slow, complex, and conservative: we can just reset it to one, which is much
easier and also reduces the number of times carry propagation occurs.
Fix that and improve the relevant comments.
Since this is mostly a comment fix, with only a rather marginal performance
boost, no need for back-patch.
Tom Lane and Dean Rasheed
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The POSIX standard for tar headers requires archive member sizes to be
printed in octal with at most 11 digits, limiting the representable file
size to 8GB. However, GNU tar and apparently most other modern tars
support a convention in which oversized values can be stored in base-256,
allowing any practical file to be a tar member. Adopt this convention
to remove two limitations:
* pg_dump with -Ft output format failed if the contents of any one table
exceeded 8GB.
* pg_basebackup failed if the data directory contained any file exceeding
8GB. (This would be a fatal problem for installations configured with a
table segment size of 8GB or more, and it has also been seen to fail when
large core dump files exist in the data directory.)
File sizes under 8GB are still printed in octal, so that no compatibility
issues are created except in cases that would have failed entirely before.
In addition, this patch fixes several bugs in the same area:
* In 9.3 and later, we'd defined tarCreateHeader's file-size argument as
size_t, which meant that on 32-bit machines it would write a corrupt tar
header for file sizes between 4GB and 8GB, even though no error was raised.
This broke both "pg_dump -Ft" and pg_basebackup for such cases.
* pg_restore from a tar archive would fail on tables of size between 4GB
and 8GB, on machines where either "size_t" or "unsigned long" is 32 bits.
This happened even with an archive file not affected by the previous bug.
* pg_basebackup would fail if there were files of size between 4GB and 8GB,
even on 64-bit machines.
* In 9.3 and later, "pg_basebackup -Ft" failed entirely, for any file size,
on 64-bit big-endian machines.
In view of these potential data-loss bugs, back-patch to all supported
branches, even though removal of the documented 8GB limit might otherwise
be considered a new feature rather than a bug fix.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous way of reconstructing check constraints was to do a separate
"ALTER TABLE ONLY tab ADD CONSTRAINT" for each table in an inheritance
hierarchy. However, that way has no hope of reconstructing the check
constraints' own inheritance properties correctly, as pointed out in
bug #13779 from Jan Dirk Zijlstra. What we should do instead is to do
a regular "ALTER TABLE", allowing recursion, at the topmost table that
has a particular constraint, and then suppress the work queue entries
for inherited instances of the constraint.
Annoyingly, we'd tried to fix this behavior before, in commit 5ed6546cf,
but we failed to notice that it wasn't reconstructing the pg_constraint
field values correctly.
As long as I'm touching pg_get_constraintdef_worker anyway, tweak it to
always schema-qualify the target table name; this seems like useful backup
to the protections installed by commit 5f173040.
In HEAD/9.5, get rid of get_constraint_relation_oids, which is now unused.
(I could alternatively have modified it to also return conislocal, but that
seemed like a pretty single-purpose API, so let's not pretend it has some
other use.) It's unused in the back branches as well, but I left it in
place just in case some third-party code has decided to use it.
In HEAD/9.5, also rename pg_get_constraintdef_string to
pg_get_constraintdef_command, as the previous name did nothing to explain
what that entry point did differently from others (and its comment was
equally useless). Again, that change doesn't seem like material for
back-patching.
I did a bit of re-pgindenting in tablecmds.c in HEAD/9.5, as well.
Otherwise, back-patch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
| |
The previous coding attempts to destroy the DSM in this case, but
child nodes might have stored data there and still be holding onto
pointers in this case. So don't do that.
Also, free the reader array instead of leaking it.
Extracted from two different patch versions both by Amit Kapila.
|
| |
|
|
| |
Amit Langote
|
| |
|
|
| |
Reported by Andres Freund.
|
| |
|
|
|
|
|
|
|
| |
This was already true for CREATE EXTENSION, but historically has not
been true for other object types. Therefore, this is a backward
incompatibility. Per discussion on pgsql-hackers, everyone seems to
agree that the new behavior is better.
Marti Raudsepp, reviewed by Haribabu Kommi and myself
|
| |
|
|
| |
KaiGai Kohei
|
| |
|
|
|
|
|
|
|
|
| |
At least one of the names was, due to a function renaming late in the
development of ON CONFLICT, wrong. Since including function names in
error messages is against the message style guide anyway, remove them
from the messages.
Discussion: CAM3SWZT8paz=usgMVHm0XOETkQvzjRtAUthATnmaHQQY0obnGw@mail.gmail.com
Backpatch: 9.5, where ON CONFLICT was introduced
|
| |
|
|
| |
Amit Kapila, per design ideas from me.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
When I wrote this code originally, the intention was to recompute the
remapinfo only when the tupledesc changes. This presumably only
happens once per query, but I copied the design pattern from other
DestReceivers. However, due to a silly oversight on my part,
tqueue->tupledesc never got set, leading to recomputation for every
tuple.
This should improve the performance of parallel scans that return a
significant number of tuples.
Report by Amit Kapila; patch by me, reviewed by him.
|
| |
|
|
|
|
|
|
|
|
|
| |
div_var_fast() postpones propagating carries in the same way as mul_var(),
so it has the same corner-case overflow risk we fixed in 246693e5ae8a36f0,
namely that the size of the carries has to be accounted for when setting
the threshold for executing a carry propagation step. We've not devised
a test case illustrating the brokenness, but the required fix seems clear
enough. Like the previous fix, back-patch to all active branches.
Dean Rasheed
|
| |
|
|
| |
from Euler Taveira
|
| | |
|
| |
|
|
|
|
|
|
| |
Prior to commit 0709b7ee72e4bc71ad07b7120acd117265ab51d0, access to
variables within a spinlock-protected critical section had to be done
through a volatile pointer, but that should no longer be necessary.
Review by Andres Freund
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since commit 11e131854f8231a21613f834c40fe9d046926387, ruleutils.c has
attempted to ensure that each RTE in a query or plan tree has a unique
alias name. However, the code that was added for this could be quite slow,
even as bad as O(N^3) if N identical RTE names must be replaced, as noted
by Jeff Janes. Improve matters by building a transient hash table within
set_rtable_names. The hash table in itself reduces the cost of detecting a
duplicate from O(N) to O(1), and we can save another factor of N by storing
the number of de-duplicated names already created for each entry, so that
we don't have to re-try names already created. This way is probably a bit
slower overall for small range tables, but almost by definition, such cases
should not be a performance problem.
In principle the same problem applies to the column-name-de-duplication
code; but in practice that seems to be less of a problem, first because
N is limited since we don't support extremely wide tables, and second
because duplicate column names within an RTE are fairly rare, so that in
practice the cost is more like O(N^2) not O(N^3). It would be very much
messier to fix the column-name code, so for now I've left that alone.
An independent problem in the same area was that the de-duplication code
paid no attention to the identifier length limit, and would happily produce
identifiers that were longer than NAMEDATALEN and wouldn't be unique after
truncation to NAMEDATALEN. This could result in dump/reload failures, or
perhaps even views that silently behaved differently than before. We can
fix that by shortening the base name as needed. Fix it for both the
relation and column name cases.
In passing, check for interrupts in set_rtable_names, just in case it's
still slow enough to be an issue.
Back-patch to 9.3 where this code was introduced.
|
| |
|
|
| |
Amit Kapila
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Normally ruleutils prints a whole-row Var as "foo.*". We already knew that
that doesn't work at top level of a SELECT list, because the parser would
treat the "*" as a directive to expand the reference into separate columns,
not a whole-row Var. However, Joshua Yanovski points out in bug #13776
that the same thing happens at top level of a ROW() construct; and some
nosing around in the parser shows that the same is true in VALUES().
Hence, apply the same workaround already devised for the SELECT-list case,
namely to add a forced cast to the appropriate rowtype in these cases.
(The alternative of just printing "foo" was rejected because it is
difficult to avoid ambiguity against plain columns named "foo".)
Back-patch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Set the "rscales" for intermediate-result calculations to ensure that
suitable numbers of significant digits are maintained throughout. The
previous coding hadn't thought this through in any detail, and as a result
could deliver results with many inaccurate digits, or in the worst cases
even fail with divide-by-zero errors as a result of losing all nonzero
digits of intermediate results.
In exp_var(), get rid entirely of the logic that separated the calculation
into integer and fractional parts: that was neither accurate nor
particularly fast. The existing range-reduction method of dividing by 2^n
can be applied across the full input range instead of only 0..1, as long as
we are careful to set an appropriate rscale for each step.
Also fix the logic in mul_var() for shortening the calculation when the
caller asks for fewer output digits than an exact calculation would
require. This bug doesn't affect simple multiplications since that code
path asks for an exact result, but it does contribute to accuracy issues
in the transcendental math functions.
In passing, improve performance of mul_var() a bit by forcing the shorter
input to be on the left, thus reducing the number of iterations of the
outer loop and probably also reducing the number of carry-propagation
steps needed.
This is arguably a bug fix, but in view of the lack of field complaints,
it does not seem worth the risk of back-patching.
Dean Rasheed
|
| |
|
|
| |
Report by Greg Clough
|
| |
|
|
|
|
|
|
|
|
| |
This makes it significantly easier to identify these lwlocks in
LWLOCK_STATS or Trace_lwlocks output. It's also arguably better
from a modularity standpoint, since lwlock.c no longer needs to
know anything about the LWLock needs of the higher-level SLRU
facility.
Ildus Kurbangaliev, reviewd by Álvaro Herrera and by me.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Letting backends continue to run if the postmaster has exited prevents
PostgreSQL from being restarted, which in many environments is
catastrophic. Worse, if some other backend crashes, we no longer have
any protection against shared memory corruption. So, arrange for them
to exit instead. We don't want to expend many cycles on this, but
including postmaster death in the set of things that we wait for when
a backend is idle seems cheap enough.
Rajeev Rastogi and Robert Haas
|
| |
|
|
|
|
|
|
|
|
| |
Commit a0d9f6e434bb56f7e5441b7988f3982feead33b3 added this support for
all other plan node types; this fills in the gap.
Since TextOutCustomScan complicates this and is pretty well useless,
remove it.
KaiGai Kohei, with some modifications by me.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit 5d1ff6bd559ea8df1b7302e245e690b01b9a4fa4 I added some logic to
relcache.c to try to ensure that the regression tests would fail if we
made a mistake about which relations belong in the relcache init files.
I'm quite sure I tested that, but I must have done so only for the
non-shared-catalog case, because a report from Adam Brightwell showed that
the regression tests still pass just fine if we bollix the shared-catalog
init file in the way this code was supposed to catch. The reason is that
that file gets loaded before we do client authentication, so the WARNING
is not sent to the client, only to the postmaster log, where it's far too
easily missed.
The least Rube Goldbergian answer to this is to put an Assert(false)
after the elog(WARNING). That will certainly get developers' attention,
while not breaking production builds' ability to recover from corner
cases with similar symptoms.
Since this is only of interest to developers, there seems no need for
a back-patch, even though the previous commit went into all branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a new flag, consider_parallel, to each RelOptInfo, indicating
whether a plan for that relation could conceivably be run inside of
a parallel worker. Right now, we're pretty conservative: for example,
it might be possible to defer applying a parallel-restricted qual
in a worker, and later do it in the leader, but right now we just
don't try to parallelize access to that relation. That's probably
the right decision in most cases, anyway.
Using the new flag, generate parallel sequential scan plans for plain
baserels, meaning that we now have parallel sequential scan in
PostgreSQL. The logic here is pretty unsophisticated right now: the
costing model probably isn't right in detail, and we can't push joins
beneath Gather nodes, so the number of plans that can actually benefit
from this is pretty limited right now. Lots more work is needed.
Nevertheless, it seems time to enable this functionality so that all
this code can actually be tested easily by users and developers.
Note that, if you wish to test this functionality, it will be
necessary to set max_parallel_degree to a value greater than the
default of 0. Once a few more loose ends have been tidied up here, we
might want to consider changing the default value of this GUC, but
I'm leaving it alone for now.
Along the way, fix a bug in cost_gather: the previous coding thought
that a Gather node's transfer overhead should be costed on the basis of
the relation size rather than the number of tuples that actually need
to be passed off to the leader.
Patch by me, reviewed in earlier versions by Amit Kapila.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
In addition, this path fills in a number of missing bits and pieces in
the parallel infrastructure. Paths and plans now have a parallel_aware
flag indicating whether whatever parallel-aware logic they have should
be engaged. It is believed that we will need this flag for a number of
path/plan types, not just sequential scans, which is why the flag is
generic rather than part of the SeqScan structures specifically.
Also, execParallel.c now gives parallel nodes a chance to initialize
their PlanState nodes from the DSM during parallel worker startup.
Amit Kapila, with a fair amount of adjustment by me. Review of previous
patch versions by Haribabu Kommi and others.
|
| |
|
|
|
| |
I dunno how commit 3bd909b220930f21d6e15833a17947be749e7fde missed
this, but it evidently did.
|
| |
|
|
| |
Per buildfarm member pademelon.
|
