| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After running GetForeignRelSize for a foreign table, adjust rel->tuples
to be at least as large as rel->rows. This prevents bizarre behavior
in estimate_num_groups() and perhaps other places, especially in the
scenario where rel->tuples is zero because pg_class.reltuples is
(suggesting that ANALYZE has never been run for the table). As things
stood, we'd end up estimating one group out of any GROUP BY on such a
table, whereas the default group-count estimate is more likely to result
in a sane plan.
Also, clarify in the documentation that GetForeignRelSize has the option
to override the rel->tuples value if it has a better idea of what to use
than what is in pg_class.reltuples.
Per report from Jeff Janes. Back-patch to all supported branches.
Patch by me; thanks to Etsuro Fujita for review
Discussion: https://postgr.es/m/CAMkU=1xNo9cnan+Npxgz0eK7394xmjmKg-QEm8wYG9P5-CcaqQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit ecd9e9f0b fixed the problem in the wrong place, causing unwanted
side-effects on the behavior of GetNextTempTableSpace(). Instead,
let's make SharedFileSetInit() responsible for subbing in the value
of MyDatabaseTableSpace when the default tablespace is called for.
The convention about what is in the tempTableSpaces[] array is
evidently insufficiently documented, so try to improve that.
It also looks like SharedFileSetInit() is doing the wrong thing in the
case where temp_tablespaces is empty. It was hard-wiring use of the
pg_default tablespace, but it seems like using MyDatabaseTableSpace
is more consistent with what happens for other temp files.
Back-patch the reversion of PrepareTempTablespaces()'s behavior to
9.5, as ecd9e9f0b was. The changes in SharedFileSetInit() go back
to v11 where that was introduced. (Note there is net zero code change
before v11 from these two patch sets, so nothing to release-note.)
Magnus Hagander and Tom Lane
Discussion: https://postgr.es/m/CABUevExg5YEsOvqMxrjoNvb3ApVyH+9jggWGKwTDFyFCVWczGQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
A likely copy/paste error in 98e8b480532 from back in 2004 would
cause temp tablespace to be reset to InvalidOid if temp_tablespaces
was set to the same value as the primary tablespace in the database.
This would cause shared filesets (such as for parallel hash joins)
to ignore them, putting the temporary files in the default tablespace
instead of the configured one. The bug is in the old code, but it
appears to have been exposed only once we had shared filesets.
Reviewed-By: Daniel Gustafsson
Discussion: https://postgr.es/m/CABUevExg5YEsOvqMxrjoNvb3ApVyH+9jggWGKwTDFyFCVWczGQ@mail.gmail.com
Backpatch-through: 9.5
|
| |
|
|
|
|
|
| |
The current definition is dangerous. No bugs exist in our code at
present, but backpatch to 11 nonetheless where it was introduced.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
explain_get_index_name() applied quote_identifier() to the index name.
This is fine for text output, but the non-text output formats all have
their own quoting conventions and would much rather start from the
actual index name. For example in JSON you'd get something like
"Index Name": "\"My Index\"",
which is surely not desirable, especially when the same does not
happen for table names. Hence, move the responsibility for applying
quoting out to the callers, where it can go into already-existing
special code paths for text format.
This changes the API spec for users of explain_get_index_name_hook:
before, they were supposed to apply quote_identifier() if necessary,
now they should not. Research suggests that the only publicly
available user of the hook is hypopg, and it actually forgot to
apply quoting anyway, so it's fine. (In any case, there's no
behavioral change for the output of a hook as seen in non-text
EXPLAIN formats, so this won't break any case that programs should
be relying on.)
Digging in the commit logs, it appears that quoting was included in
explain_get_index_name's duties when commit 604ffd280 invented it;
and that was fine at the time because we only had text output format.
This should have been rethought when non-text formats were invented,
but it wasn't.
This is a fairly clear bug for users of non-text EXPLAIN formats,
so back-patch to all supported branches.
Per bug #16502 from Maciek Sakrejda. Patch by me (based on
investigation by Euler Taveira); thanks to Julien Rouhaud for review.
Discussion: https://postgr.es/m/16502-57bd1c9f913ed1d1@postgresql.org
|
| |
|
|
|
|
|
|
|
|
| |
spg_mask() didn't take into account that pd_lower equal to SizeOfPageHeaderData
is still valid value. This commit fixes that. Backpatch to 11, where
spg_mask() pg_lower check was introduced.
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/20200615131405.GM52676%40paquier.xyz
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This was a danger only for --disable-spinlocks in combination with
atomic operations unsupported by the current platform.
While atomics.c was careful to signal that a separate semaphore ought
to be used when spinlock emulation is active, spin.c didn't actually
implement that mechanism. That's my (Andres') fault, it seems to have
gotten lost during the development of the atomic operations support.
Fix that issue and add test for nesting atomic operations inside a
spinlock.
Author: Andres Freund
Discussion: https://postgr.es/m/20200605023302.g6v3ydozy5txifji@alap3.anarazel.de
Backpatch: 9.5-
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Advancing a replication slot did not recompute the oldest xmin and LSN
values across replication slots, preventing resource removal like
segments not recycled at checkpoint time. The original commit that
introduced the slot advancing in 9c7d06d never did the update of those
oldest values, and b0afdca removed this code.
This commit adds a TAP test to check segment recycling with advancing
for physical slots, enforcing an extra segment switch before advancing
to check if the segment gets correctly recycled after a checkpoint.
Reported-by: Andres Freund
Reviewed-by: Alexey Kondratov, Kyptaro Horiguchi
Discussion: https://postgr.es/m/20200609171904.kpltxxvjzislidks@alap3.anarazel.de
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
| |
Once the counter goes negative we ended up with spinlocks that errored
out on first use (due to check in tas_sema).
Author: Andres Freund
Reviewed-By: Robert Haas
Discussion: https://postgr.es/m/20200606023103.avzrctgv7476xj7i@alap3.anarazel.de
Backpatch: 9.5-
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Convert buffile.c error handling to use ereport. This fixes cases where
I/O errors were indistinguishable from EOF or not reported. Also remove
"%m" from error messages where errno would be bogus. While we're
modifying those strings, add block numbers and short read byte counts
where appropriate.
Back-patch to all supported releases.
Reported-by: Amit Khandekar <amitdkhan.pg@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Ibrar Ahmed <ibrar.ahmad@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGJE04G%3D8TLK0DLypT_27D9dR8F1RQgNp0jK6qR0tZGWOw%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When there is just one non-null input value, and it is infinity or NaN,
aggregates such as stddev_pop and covar_pop should produce a NaN
result, because the calculation is not well-defined. They used to do
so, but since we adopted Youngs-Cramer aggregation in commit e954a727f,
they produced zero instead. That's an oversight, so fix it. Add tests
exercising these edge cases.
Affected aggregates are
var_pop(double precision)
stddev_pop(double precision)
var_pop(real)
stddev_pop(real)
regr_sxx(double precision,double precision)
regr_syy(double precision,double precision)
regr_sxy(double precision,double precision)
regr_r2(double precision,double precision)
regr_slope(double precision,double precision)
regr_intercept(double precision,double precision)
covar_pop(double precision,double precision)
corr(double precision,double precision)
Back-patch to v12 where the behavior change was accidentally introduced.
Report and patch by me; thanks to Dean Rasheed for review.
Discussion: https://postgr.es/m/353062.1591898766@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When merging two NumericAggStates, the code missed adding the new
state's NaNcount unless its N was also nonzero; since those counts
are independent, this is wrong.
This would only have visible effect if some partial aggregate scans
found only NaNs while earlier ones found only non-NaNs; then we could
end up falsely deciding that there were no NaNs and fail to return a
NaN final result as expected. That's pretty improbable, so it's no
surprise this hasn't been reported from the field. Still, it's a bug.
I didn't try to produce a regression test that would show the bug,
but I did notice that these functions weren't being reached at all
in our regression tests, so I improved the tests to at least
exercise them. With these additions, I see pretty complete code
coverage on the aggregation-related functions in numeric.c.
Back-patch to 9.6 where this code was introduced. (I only added
the improved test case as far back as v10, though, since the
relevant part of aggregates.sql isn't there at all in 9.6.)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
SSI's HeapCheckForSerializableConflictOut() test failed to correctly
handle conditions involving a concurrently inserted tuple which is later
concurrently updated by a separate transaction . A SELECT statement
that called HeapCheckForSerializableConflictOut() could end up using the
same XID (updater's XID) for both the original tuple, and the successor
tuple, missing the XID of the xact that created the original tuple
entirely. This only happened when neither tuple from the chain was
visible to the transaction's MVCC snapshot.
The observable symptoms of this bug were subtle. A pair of transactions
could commit, with the later transaction failing to observe the effects
of the earlier transaction (because of the confusion created by the
update to the non-visible row). This bug dates all the way back to
commit dafaa3ef, which added SSI.
To fix, make sure that we check the xmin of concurrently inserted tuples
that happen to also have been updated concurrently.
Author: Peter Geoghegan
Reported-By: Kyle Kingsbury
Reviewed-By: Thomas Munro
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443@jepsen.io
Backpatch: All supported versions
|
| |
|
|
|
|
|
| |
The previous description string still described the pre-PostgreSQL
10 (pre eb61136dc75a76caef8460fa939244d8593100f2) behavior of
selecting between encrypted and unencrypted, but it is now choosing
between encryption algorithms.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The redo routines for XLOG_CHECKPOINT_{ONLINE,SHUTDOWN} must acquire
ControlFileLock before modifying ControlFile->checkPointCopy, or the
checkpointer could write out a control file with a bad checksum.
Likewise, XLogReportParameters() must acquire ControlFileLock before
modifying ControlFile and calling UpdateControlFile().
Back-patch to all supported releases.
Author: Nathan Bossart <bossartn@amazon.com>
Author: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/70BF24D6-DC51-443F-B55A-95735803842A%40amazon.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 5e0928005 changed the planner so that, instead of blindly using
DEFAULT_COLLATION_OID when invoking operators for selectivity estimation,
it would use the collation of the column whose statistics we're
considering. This was recognized as still being not quite the right
thing, but it seemed like a good incremental improvement. However,
shortly thereafter we introduced nondeterministic collations, and that
creates cases where operators can fail if they're passed the wrong
collation. We don't want planning to fail in cases where the query itself
would work, so this means that we *must* use the query's collation when
invoking operators for estimation purposes.
The only real problem this creates is in ineq_histogram_selectivity, where
the binary search might produce a garbage answer if we perform comparisons
using a different collation than the column's histogram is ordered with.
However, when the query's collation is significantly different from the
column's default collation, the estimate we previously generated would be
pretty irrelevant anyway; so it's not clear that this will result in
noticeably worse estimates in practice. (A follow-on patch will improve
this situation in HEAD, but it seems too invasive for back-patch.)
The patch requires changing the signatures of mcv_selectivity and allied
functions, which are exported and very possibly are used by extensions.
In HEAD, I just did that, but an API/ABI break of this sort isn't
acceptable in stable branches. Therefore, in v12 the patch introduces
"mcv_selectivity_ext" and so on, with signatures matching HEAD, and makes
the old functions into wrappers that assume DEFAULT_COLLATION_OID should
be used. That does not match the prior behavior, but it should avoid risk
of failure in most cases. (In practice, I think most extension datatypes
aren't collation-aware, so the change probably doesn't matter to them.)
Per report from James Lucas. Back-patch to v12 where the problem was
introduced.
Discussion: https://postgr.es/m/CAAFmbbOvfi=wMM=3qRsPunBSLb8BFREno2oOzSBS=mzfLPKABw@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
| |
If the flag value is lost, logical decoding would work the same way as
REPLICA IDENTITY NOTHING, meaning that no old tuple values would be
included in the changes anymore produced by logical decoding.
Author: Michael Paquier
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/20200603065340.GK89559@paquier.xyz
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's intentional that we don't allow values greater than 24 hours,
while we do allow "24:00:00" as well as "23:59:60" as inputs.
However, the range check was miscoded in such a way that it would
accept "23:59:60.nnn" with a nonzero fraction. For time or timetz,
the stored result would then be greater than "24:00:00" which would
fail dump/reload, not to mention possibly confusing other operations.
Fix by explicitly calculating the result and making sure it does not
exceed 24 hours. (This calculation is redundant with what will happen
later in tm2time or tm2timetz. Maybe someday somebody will find that
annoying enough to justify refactoring to avoid the duplication; but
that seems too invasive for a back-patched bug fix, and the cost is
probably unmeasurable anyway.)
Note that this change also rejects such input as the time portion
of a timestamp(tz) value.
Back-patch to v10. The bug is far older, but to change this pre-v10
we'd need to ensure that the logic behaves sanely with float timestamps,
which is possibly nontrivial due to roundoff considerations.
Doesn't really seem worth troubling with.
Per report from Christoph Berg.
Discussion: https://postgr.es/m/20200520125807.GB296739@msg.df7cb.de
|
| |
|
|
|
|
|
|
| |
This broke the project rule to not call any complex code while a
spinlock is held. Issue introduced by b89e151.
Discussion: https://postgr.es/m/20200602.161518.1399689010416646074.horikyota.ntt@gmail.com
Backpatch-through: 9.5
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix some more violations of the "only straight-line code inside a
spinlock" rule. These are hazardous not only because they risk
holding the lock for an excessively long time, but because it's
possible for palloc to throw elog(ERROR), leaving a stuck spinlock
behind.
copy_replication_slot() had two separate places that did pallocs
while holding a spinlock. We can make the code simpler and safer
by copying the whole ReplicationSlot struct into a local variable
while holding the spinlock, and then referencing that copy.
(While that's arguably more cycles than we really need to spend
holding the lock, the struct isn't all that big, and this way seems
far more maintainable than copying fields piecemeal. Anyway this
is surely much cheaper than a palloc.) That bug goes back to v12.
InvalidateObsoleteReplicationSlots() not only did a palloc while
holding a spinlock, but for extra sloppiness then leaked the memory
--- probably for the lifetime of the checkpointer process, though
I didn't try to verify that. Fortunately that silliness is new
in HEAD.
pg_get_replication_slots() had a cosmetic violation of the rule,
in that it only assumed it's safe to call namecpy() while holding
a spinlock. Still, that's a hazard waiting to bite somebody, and
there were some other cosmetic coding-rule violations in the same
function, so clean it up. I back-patched this as far as v10; the
code exists before that but it looks different, and this didn't
seem important enough to adapt the patch further back.
Discussion: https://postgr.es/m/20200602.161518.1399689010416646074.horikyota.ntt@gmail.com
|
| |
|
|
|
|
|
|
|
|
| |
This issue has been present since the introduction of this code as of
a3519a2 from 2002, and has been found by buildfarm member prion that
uses RELCACHE_FORCE_RELEASE via the tests introduced recently in
e786be5.
Discussion: https://postgr.es/m/20200601022055.GB4121@paquier.xyz
Backpatch-through: 9.5
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A relation that has no storage initializes rd_tableam to NULL, which
caused those two functions to crash because of a pointer dereference.
Note that in 11 and older versions, this has always failed with a
confusing error "could not open file".
These two functions are used by the Postgres ODBC driver, which requires
them only when connecting to a backend strictly older than 8.1. When
connected to 8.2 or a newer version, the driver uses a RETURNING clause
instead whose support has been added in 8.2, so it should be possible to
just remove both functions in the future. This is left as an issue to
address later.
While on it, add more regression tests for those functions as we never
really had coverage for them, and for aggregates of TIDs.
Reported-by: Jaime Casanova, via sqlsmith
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CAJGNTeO93u-5APMga6WH41eTZ3Uee9f3s8dCpA-GSSqNs1b=Ug@mail.gmail.com
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
| |
LLVM has removed this header, in the branch that will become llvm
11. But as it turns out we didn't actually need it, so just remove it.
Author: Jesse Zhang <sbjesse@gmail.com>
Discussion: https://postgr.es/m/CAGf+fX7bvtP0YXMu7pOsu_NwhxW6dArTkxb=jt7M2-UJkyJ_3g@mail.gmail.com
Backpatch: 11, where JIT support using llvm was introduced.
|
| |
|
|
|
|
|
|
|
|
|
| |
The repeat() function loops for potentially a long time without
ever checking for interrupts. This prevents, for example, a query
cancel from interrupting until the work is all done. Fix by
inserting a CHECK_FOR_INTERRUPTS() into the loop.
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/flat/8692553c-7fe8-17d9-cbc1-7cddb758f4c6%40joeconway.com
|
| |
|
|
|
|
|
|
| |
ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE was used in an ereport with the
same message but different errdetail a few lines earlier, so use that
here as well.
Backpatch-through: 11
|
| |
|
|
|
| |
This was done for all scanners in
421167362242ce1fb46d6d720798787e7cd65aad but not added to the new one.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
These were missed when these were added to pg_hba.conf in PG 12;
updates docs and pg_hba.conf.sample.
Reported-by: Arthur Nascimento
Bug: 16380
Discussion: https://postgr.es/m/20200421182736.GG19613@momjian.us
Backpatch-through: 12
|
| |
|
|
| |
They were introduced in 898e5e3290a7; backpatch to 12.
|
| |
|
|
|
|
|
|
| |
Reported-by: Sawada Masahiko
Author: Sawada Masahiko
Reviewed-by: Amit Kapila
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CA+fd4k4Ws7M7YQ8PqSym5WB1y75dZeBTd1sZJUQdfe0KJQ-iSA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In a logical replication subscriber, a table using REPLICA IDENTITY FULL
which has a primary key would try to use the primary key's index
available to scan for a tuple, but an assertion only assumed as correct
the case of an index associated to REPLICA IDENTITY USING INDEX. This
commit corrects the assertion so as the use of a primary key index is a
valid case.
Reported-by: Dilip Kumar
Analyzed-by: Dilip Kumar
Author: Euler Taveira
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/CAFiTN-u64S5bUiPL1q5kwpHNd0hRnf1OE-bzxNiOs5zo84i51w@mail.gmail.com
Backpatch-through: 10
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous coding zeroed out offsetof(ReplicationStateCtl, states)
more bytes than it was entitled to, as a consequence of starting the
zeroing from the wrong pointer (or, if you prefer, using the wrong
calculation of how much to zero).
It's unsurprising that this has not caused any reported problems,
since it can be expected that the newly-allocated block is at the end
of what we've used in shared memory, and we always make the shmem
block substantially bigger than minimally necessary. Nonetheless,
this is wrong and it could bite us someday; plus it's a dangerous
model for somebody to copy.
This dates back to the introduction of this code (commit 5aa235042),
so back-patch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
_bt_killitems marks btree items dead when a scan leaves the page where
they live, but it does so with only share lock (to improve concurrency).
This was historicall okay, since killing a dead item has no
consequences. However, with the advent of data checksums and
wal_log_hints, this action incurs a WAL full-page-image record of the
page. Multiple concurrent processes would write the same page several
times, leading to WAL bloat. The probability of this happening can be
reduced by only killing items if they're not already dead, so change the
code to do that.
The problem could eliminated completely by having _bt_killitems upgrade
to exclusive lock upon seeing a killable item, but that would reduce
concurrency so it's considered a cure worse than the disease.
Backpatch all the way back to 9.5, since wal_log_hints was introduced in
9.4.
Author: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Discussion: https://postgr.es/m/CA+fd4k6PeRj2CkzapWNrERkja5G0-6D-YQiKfbukJV+qZGFZ_Q@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Commit 3eb77eba5a moved the loop and refactored it, and inadvertently
changed the effect of fsync=off so that it also skipped removing entries
from the pendingOps table. That was not intentional, and leads to an
assertion failure if you turn fsync on while the server is running and
reload the config.
Backpatch-through: 12-
Reviewed-By: Thomas Munro
Discussion: https://www.postgresql.org/message-id/3cbc7f4b-a5fa-56e9-9591-c886deb07513%40iki.fi
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Visual Studio 2015 and later versions should still be able to do the same
as Visual Studio 2012, but the declaration of locale_name is missing in
_locale_t, causing the code compilation to fail, hence this falls back
instead on to enumerating all system locales by using EnumSystemLocalesEx
to find the required locale name. If the input argument is in Unix-style
then we can get ISO Locale name directly by using GetLocaleInfoEx() with
LCType as LOCALE_SNAME.
In passing, change the documentation references of the now obsolete links.
Note that this problem occurs only with NLS enabled builds.
Author: Juan José Santamaría Flecha, Davinder Singh and Amit Kapila
Reviewed-by: Ranier Vilela and Amit Kapila
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CAHzhFSFoJEWezR96um4-rg5W6m2Rj9Ud2CNZvV4NWc9tXV7aXQ@mail.gmail.com
|
| |
|
|
|
| |
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 60bf9b5caac08d0483f6f92ebf9ef2e0eef5b6bb
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously when there were multiple timelines listed in the history file
of the recovery target timeline, archive recovery searched all of them,
starting from the newest timeline to the oldest one, to find the segment
to read. That is, archive recovery had to continuously fail scanning
the segment until it reached the timeline that the segment belonged to.
These scans for non-existent segment could be harmful on the recovery
performance especially when archival area was located on the remote
storage and each scan could take a long time.
To address the issue, this commit changes archive recovery so that
it skips scanning the timeline that the segment to read doesn't belong to.
Per discussion, back-patch to all supported versions.
Author: Kyotaro Horiguchi, tweaked a bit by Fujii Masao
Reviewed-by: David Steele, Pavel Suderevsky, Grigory Smolkin
Discussion: https://postgr.es/m/16159-f5a34a3a04dc67e0@postgresql.org
Discussion: https://postgr.es/m/20200129.120222.1476610231001551715.horikyota.ntt@gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Several combinations of generated columns and inheritance in CREATE
TABLE were not handled correctly. Specifically:
- Disallow a child column specifying a generation expression if the
parent column is a generated column. The child column definition
must be unadorned and the parent column's generation expression will
be copied.
- Prohibit a child column of a generated parent column specifying
default values or identity.
- Allow a child column of a not-generated parent column specifying
itself as a generated column. This previously did not work, but it
was possible to arrive at the state via other means (involving ALTER
TABLE), so it seems sensible to support it.
Add tests for each case. Also add documentation about the rules
involving generated columns and inheritance.
Discussion:
https://www.postgresql.org/message-id/flat/15830.1575468847%40sss.pgh.pa.us
https://www.postgresql.org/message-id/flat/2678bad1-048f-519a-ef24-b12962f41807%40enterprisedb.com
https://www.postgresql.org/message-id/flat/CAJvUf_u4h0DxkCMCeEKAWCuzGUTnDP-G5iVmSwxLQSXn0_FWNQ%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
| |
When creating a new index, the attstorage setting of the table column
is copied to regular (non-expression) index columns. But a later
ALTER TABLE ... SET STORAGE is not propagated to indexes, thus
creating an inconsistent and undumpable state.
Discussion: https://www.postgresql.org/message-id/flat/9765d72b-37c0-06f5-e349-2a580aafd989%402ndquadrant.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
TimelineHistoryRead and TimelineHistoryWrite wait events are reported
during waiting for a read and write of a timeline history file, respectively.
However, previously, TimelineHistoryRead wait event was not reported
while readTimeLineHistory() was reading a timeline history file. Also
TimelineHistoryWrite was not reported while writeTimeLineHistory() was
writing one line with the details of the timeline split, at the end.
This commit fixes these issues.
Back-patch to v10 where wait events for a timeline history file was added.
Author: Masahiro Ikeda
Reviewed-by: Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/d11b0c910b63684424e06772eb844ab5@oss.nttdata.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
checkcondition_str() failed to report multiple matches for a prefix
pattern correctly: it would dutifully merge the match positions, but
then after exiting that loop, if the last prefix-matching word had
had no suitable positions, it would report there were no matches.
The upshot would be failing to recognize a match that the query
should match.
It looks like you need all of these conditions to see the bug:
* a phrase search (else we don't ask for match position details)
* a prefix search item (else we don't get to this code)
* a weight restriction (else checkclass_str won't fail)
Noted while investigating a problem report from Pavel Borisov,
though this is distinct from the issue he was on about.
Back-patch to 9.6 where phrase search was added.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We were acquiring object locks then deleting objects one by one, instead
of acquiring all object locks first, ignoring those that did not exist,
and then deleting all objects together. The latter is the correct
protocol to use, and what this commits changes to code to do. Failing
to follow that leads to "cache lookup failed for relation XYZ" error
reports when DROP OWNED runs concurrently with other DDL -- for example,
a session termination that removes some temp tables.
Author: Álvaro Herrera
Reported-by: Mithun Chicklore Yogendra (Mithun CY)
Reviewed-by: Ahsan Hadi, Tom Lane
Discussion: https://postgr.es/m/CADq3xVZTbzK4ZLKq+dn_vB4QafXXbmMgDP3trY-GuLnib2Ai1w@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Both the backend and libpq leaked buffers containing encrypted data
to be transmitted, so that the process size would grow roughly as
the total amount of data sent.
There were also far-less-critical leaks of the same sort in GSSAPI
session establishment.
Oversight in commit b0b39f72b, which I failed to notice while
reviewing the code in 2c0cdc818.
Per complaint from pmc@citylink.
Back-patch to v12 where this code was introduced.
Discussion: https://postgr.es/m/20200504115649.GA77072@gate.oper.dinoex.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If the client is compiled with GSSAPI support and tries to start up GSS
with the server, but the server is not compiled with GSSAPI support, we
would mistakenly end up falling through to call ProcessStartupPacket
with secure_done = true, but the client might then try to perform SSL,
which the backend wouldn't understand and we'd end up failing the
connection with:
FATAL: unsupported frontend protocol 1234.5679: server supports 2.0 to 3.0
Fix by arranging to track ssl_done independently from gss_done, instead
of trying to use the same boolean for both.
Author: Andrew Gierth
Discussion: https://postgr.es/m/87h82kzwqn.fsf@news-spur.riddles.org.uk
Backpatch: 12-, where GSSAPI encryption was added.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On further reflection, code comments added by commit b0229f26 slightly
misrepresented how we determine the oldest bpto.xact for the index.
btvacuumpage() does not treat the bpto.xact of a page that it put in the
FSM as a candidate to be the oldest deleted page (the delete-marked page
that has the oldest bpto.xact XID among all pages encountered).
The definition of a deleted page for the purposes of the bpto.xact
calculation is different from the definition used by the bulk delete
statistics. The bulk delete statistics don't distinguish between pages
that were deleted by the current VACUUM, pages deleted by a previous
VACUUM operation but not yet recyclable/reusable, and pages that are
reusable (though reusable pages are counted separately).
Backpatch: 11-, just like commit b0229f26.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The logic for determining how many nbtree pages in an index are deleted
pages sometimes undercounted pages. Pages that were deleted by the
current VACUUM operation (as opposed to some previous VACUUM operation
whose deleted pages have yet to be reused) were sometimes overlooked.
The final count is exposed to users through VACUUM VERBOSE's "%u index
pages have been deleted" output.
btvacuumpage() avoided double-counting when _bt_pagedel() deleted more
than one page by assuming that only one page was deleted, and that the
additional deleted pages would get picked up during a future call to
btvacuumpage() by the same VACUUM operation. _bt_pagedel() can
legitimately delete pages that the btvacuumscan() scan will not visit
again, though, so that assumption was slightly faulty.
Fix the accounting by teaching _bt_pagedel() about its caller's
requirements. It now only reports on pages that it knows btvacuumscan()
won't visit again (including the current btvacuumpage() page), so
everything works out in the end.
This bug has been around forever. Only backpatch to v11, though, to
keep _bt_pagedel() is sync on the branches that have today's bugfix
commit b0229f26da. Note that this commit changes the signature of
_bt_pagedel(), just like commit b0229f26da.
Author: Peter Geoghegan
Reviewed-By: Masahiko Sawada
Discussion: https://postgr.es/m/CAH2-WzkrXBcMQWAYUJMFTTvzx_r4q=pYSjDe07JnUXhe+OZnJA@mail.gmail.com
Backpatch: 11-
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 857f9c36cda (which taught nbtree VACUUM to skip a scan of the
index from btcleanup in situations where it doesn't seem worth it) made
VACUUM maintain the oldest btpo.xact among all deleted pages for the
index as a whole. It failed to handle all the details surrounding pages
that are deleted by the current VACUUM operation correctly (though pages
deleted by some previous VACUUM operation were processed correctly).
The most immediate problem was that the special area of the page was
examined without a buffer pin at one point. More fundamentally, the
handling failed to account for the full range of _bt_pagedel()
behaviors. For example, _bt_pagedel() sometimes deletes internal pages
in passing, as part of deleting an entire subtree with btvacuumpage()
caller's page as the leaf level page. The original leaf page passed to
_bt_pagedel() might not be the page that it deletes first in cases where
deletion can take place.
It's unclear how disruptive this bug may have been, or what symptoms
users might want to look out for. The issue was spotted during
unrelated code review.
To fix, push down the logic for maintaining the oldest btpo.xact to
_bt_pagedel(). btvacuumpage() is now responsible for pages that were
fully deleted by a previous VACUUM operation, while _bt_pagedel() is now
responsible for pages that were deleted by the current VACUUM operation
(this includes half-dead pages from a previous interrupted VACUUM
operation that become fully deleted in _bt_pagedel()). Note that
_bt_pagedel() should never encounter an existing deleted page.
This commit theoretically breaks the ABI of a stable release by changing
the signature of _bt_pagedel(). However, if any third party extension
is actually affected by this, then it must already be completely broken
(since there are numerous assumptions made in _bt_pagedel() that cannot
be met outside of VACUUM). It seems highly unlikely that such an
extension actually exists, in any case.
Author: Peter Geoghegan
Reviewed-By: Masahiko Sawada
Discussion: https://postgr.es/m/CAH2-WzkrXBcMQWAYUJMFTTvzx_r4q=pYSjDe07JnUXhe+OZnJA@mail.gmail.com
Backpatch: 11-, where the "skip full scan" feature was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Queries such as '!(foo<->bar)' failed to find matching rows when
implemented as a GiST or GIN index search. That's because of
failing to handle phrase searches as tri-valued when considering
a query without any position information for the target tsvector.
We can only say that the phrase operator might match, not that it
does match; and therefore its NOT also might match. The previous
coding incorrectly inverted the approximate phrase result to
decide that there was certainly no match.
To fix, we need to make TS_phrase_execute return a real ternary result,
and then bubble that up accurately in TS_execute. As long as we have
to do that anyway, we can simplify the baroque things TS_phrase_execute
was doing internally to manage tri-valued searching with only a bool
as explicit result.
For now, I left the externally-visible result of TS_execute as a plain
bool. There do not appear to be any outside callers that need to
distinguish a three-way result, given that they passed in a flag
saying what to do in the absence of position data. This might need
to change someday, but we wouldn't want to back-patch such a change.
Although tsginidx.c has its own TS_execute_ternary implementation for
use at upper index levels, that sadly managed to get this case wrong
as well :-(. Fixing it is a lot easier fortunately.
Per bug #16388 from Charles Offenbacher. Back-patch to 9.6 where
phrase search was introduced.
Discussion: https://postgr.es/m/16388-98cffba38d0b7e6e@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CreateRole() was passing a Value node, not a RoleSpec node, for the
newly-created role name when adding the role as a member of existing
roles for the IN ROLE syntax.
This mistake went unnoticed because the node in question is used only
for error messages and is not accessed on non-error paths.
In older pg versions (such as 9.5 where this was found), this results
in an "unexpected node type" error in place of the real error. That
node type check was removed at some point, after which the code would
accidentally fail to fail on 64-bit platforms (on which accessing the
Value node as if it were a RoleSpec would be mostly harmless) or give
an "unexpected role type" error on 32-bit platforms.
Fix the code to pass the correct node type, and add an lfirst_node
assertion just in case.
Per report on irc from user m1chelangelo.
Backpatch all the way, because this error has been around for a long
time.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 32ff26911 introduced use of rank() into the triggers view to
calculate the spec-mandated action_order column. As written, this
prevents query constraints on the table-name column from being pushed
below the window aggregate step. That's bad for performance of this
typical usage pattern, since the view now has to be evaluated for all
tables not just the one(s) the user wants to see. It's also the cause
of some recent buildfarm failures, in which trying to evaluate the view
rows for triggers in process of being dropped resulted in "cache lookup
failed for function NNN" errors. Those rows aren't of interest to the
test script doing the query, but the filter that would eliminate them
is being applied too late. None of this happened before the rank()
call was there, so it's a regression compared to v10 and before.
We can improve matters by changing the rank() call so that instead of
partitioning by OIDs, it partitions by nspname and relname, casting
those to sql_identifier so that they match the respective view output
columns exactly. The planner has enough intelligence to know that
constraints on partitioning columns are safe to push down, so this
eliminates the performance problem and the regression test failure
risk. We could make the other partitioning columns match view outputs
as well, but it'd be more complicated and the performance benefits
are questionable.
Side note: as this stands, the planner will push down constraints on
event_object_table and trigger_schema, but not on event_object_schema,
because it checks for ressortgroupref matches not expression
equivalence. That might be worth improving someday, but it's not
necessary to fix the immediate concern.
Back-patch to v11 where the rank() call was added. Ordinarily we'd not
change information_schema in released branches, but the test failure has
been seen in v12 and presumably could happen in v11 as well, so we need
to do this to keep the buildfarm happy. The change is harmless so far
as users are concerned. Some might wish to apply it to existing
installations if performance of this type of query is of concern,
but those who don't are no worse off.
I bumped catversion in HEAD as a pro forma matter (there's no
catalog incompatibility that would really require a re-initdb).
Obviously that can't be done in the back branches.
Discussion: https://postgr.es/m/5891.1587594470@sss.pgh.pa.us
|
