| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the plancache, we check if the environment we planned the query under
has changed in a way which requires us to re-plan, such as when the user
for whom the plan was prepared changes and RLS is being used (and,
therefore, there may be different policies to apply).
Unfortunately, while those values were set and checked, they were not
being reset when the query was re-planned and therefore, in cases where
we change role, re-plan, and then change role again, we weren't
re-planning again. This leads to potentially incorrect policies being
applied in cases where role-specific policies are used and a given query
is planned under one role and then executed under other roles, which
could happen under security definer functions or when a common user and
query is planned initially and then re-used across multiple SET ROLEs.
Further, extensions which made use of CopyCachedPlan() may suffer from
similar issues as the RLS-related fields were not properly copied as
part of the plan and therefore RevalidateCachedQuery() would copy in the
current settings without invalidating the query.
Fix by using the same approach used for 'search_path', where we set the
correct values in CompleteCachedPlan(), check them early on in
RevalidateCachedQuery() and then properly reset them if re-planning.
Also, copy through the values during CopyCachedPlan().
Pointed out by Ashutosh Bapat. Reviewed by Michael Paquier.
Back-patch to 9.5 where RLS was introduced.
Security: CVE-2016-2193
|
| |
|
|
|
| |
Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 0ffb9ae13cb7e2a9480ed8ee34071074bd80a7aa
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Unfortunately, every version of glibc thus far tested has bugs whereby
strcoll() ordering does not match strxfrm() ordering as required by
the standard. This can result in, for example, corrupted indexes.
Disabling abbreviated keys in these cases slows down non-C-collation
string sorting considerably, but there seems to be no practical
alternative. Users who are confident that their libc implementations
are solid in this regard can re-enable the optimization by compiling
with TRUST_STRXFRM.
Users who have built indexes using PostgreSQL 9.5 or PostgreSQL 9.5.1
should REINDEX if there is a possibility that they may have been
affected by this problem.
Report by Marc-Olaf Jaschke. Investigation mostly by Tom Lane, with
help from Peter Geoghegan, Noah Misch, Stephen Frost, and me. Patch
by me, reviewed by Peter Geoghegan and Tom Lane.
|
| |
|
|
|
|
| |
User-facing (even tested by regression tests) error conditions were thrown
with elog(), hence had wrong SQLSTATE and were untranslatable. And the
error message texts weren't up to project style, either.
|
| |
|
|
|
|
|
|
|
|
| |
jsonb_set() could produce wrong answers or incorrect error reports, or in
the worst case even crash, when trying to convert a path-array element into
an integer for use as an array subscript. Per report from Vitaly Burovoy.
Back-patch to 9.5 where the faulty code was introduced (in commit
c6947010ceb42143).
Michael Paquier
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit afb9249d06f47d7a, we (probably I) made ExecLockRows assign
null test tuples to all relations of the query while setting up to do an
EvalPlanQual recheck for a newly-updated locked row. This was sheerest
brain fade: we should only set test tuples for relations that are lockable
by the LockRows node, and in particular empty test tuples are only sensible
for inheritance child relations that weren't the source of the current
tuple from their inheritance tree. Setting a null test tuple for an
unrelated table causes it to return NULLs when it should not, as exhibited
in bug #14034 from Bronislav Houdek. To add insult to injury, doing it the
wrong way required two loops where one would suffice; so the corrected code
is even a bit shorter and faster.
Add a regression test case based on his example, and back-patch to 9.5
where the bug was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Modern Perl has removed psed from its core distribution, so it might not
be readily available on some build platforms. We therefore replace its
use with a Perl script generated by s2p, which is equivalent to the sed
script. The latter is retained for non-MSVC builds to avoid creating a
new hard dependency on Perl for non-Windows tarball builds.
Backpatch to all live branches.
Michael Paquier and me.
|
| |
|
|
| |
Aleksander Alekseev
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In HEAD, fix incorrect field width for hours part of OF when tm_gmtoff is
negative. This was introduced by commit 2d87eedc1d4468d3 as a result of
falsely applying a pattern that's correct when + signs are omitted, which
is not the case for OF.
In 9.4, fix missing abs() call that allowed a sign to be attached to the
minutes part of OF. This was fixed in 9.5 by 9b43d73b3f9bef27, but for
inscrutable reasons not back-patched.
In all three versions, ensure that the sign of tm_gmtoff is correctly
reported even when the GMT offset is less than 1 hour.
Add regression tests, which evidently we desperately need here.
Thomas Munro and Tom Lane, per report from David Fetter
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
INSERT ... ON CONFLICT's precheck may have to wait on the outcome of
another insertion, which may or may not itself be a speculative
insertion. This wait is not necessarily associated with an exclusion
constraint, but was always reported that way in log messages if the wait
happened to involve a tuple that had no speculative token.
Initially discovered through use of ON CONFLICT DO NOTHING, where
spurious references to exclusion constraints in log messages were more
likely.
Patch by Peter Geoghegan.
Reviewed by Julien Rouhaud.
Back-patch to 9.5 where INSERT ... ON CONFLICT was added.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit d88976cfa1302e8d removed this code from ginFreeScanKeys():
- if (entry->list)
- pfree(entry->list);
evidently in the belief that that ItemPointer array is allocated in the
keyCtx and so would be reclaimed by the following MemoryContextReset.
Unfortunately, it isn't and it won't. It'd likely be a good idea for
that to become so, but as a simple and back-patchable fix in the
meantime, restore this code to ginFreeScanKeys().
Also, add a similar pfree to where startScanEntry() is about to zero out
entry->list. I am not sure if there are any code paths where this
change prevents a leak today, but it seems like cheap future-proofing.
In passing, make the initial allocation of so->entries[] use palloc
not palloc0. The code doesn't depend on unused entries being zero;
if it did, the array-enlargement code in ginFillScanEntry() would be
wrong. So using palloc0 initially can only serve to confuse readers
about what the invariant is.
Per report from Felipe de Jesús Molina Bravo, via Jaime Casanova in
<CAJGNTeMR1ndMU2Thpr8GPDUfiHTV7idELJRFusA5UXUGY1y-eA@mail.gmail.com>
|
| |
|
|
|
|
| |
This longstanding functionality evidently got lost in commit
3d6d1b585524aab6. Noted while studying an OOM report from Jaime
Casanova. Backpatch to 9.5 where the bug was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Visual Studio 2013 CRT generates invalid code when it makes a 64-bit
build that is later used on a CPU that supports AVX2 instructions using a
version of Windows before 7SP1/2008R2SP1.
Detect this combination, and in those cases turn off the generation of
FMA3, per recommendation from the Visual Studio team.
The bug is actually in the CRT shipping with Visual Studio 2013, but
Microsoft have stated they're only fixing it in newer major versions.
The fix is therefor conditioned specifically on being built with this
version of Visual Studio, and not previous or later versions.
Author: Christian Ullrich
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Renaming a file using rename(2) is not guaranteed to be durable in face
of crashes. Use the previously added durable_rename()/durable_link_or_rename()
in various places where we previously just renamed files.
Most of the changed call sites are arguably not critical, but it seems
better to err on the side of too much durability. The most prominent
known case where the previously missing fsyncs could cause data loss is
crashes at the end of a checkpoint. After the actual checkpoint has been
performed, old WAL files are recycled. When they're filled, their
contents are fdatasynced, but we did not fsync the containing
directory. An OS/hardware crash in an unfortunate moment could then end
up leaving that file with its old name, but new content; WAL replay
would thus not replay it.
Reported-By: Tomas Vondra
Author: Michael Paquier, Tomas Vondra, Andres Freund
Discussion: 56583BDD.9060302@2ndquadrant.com
Backpatch: All supported branches
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Renaming a file using rename(2) is not guaranteed to be durable in face
of crashes; especially on filesystems like xfs and ext4 when mounted
with data=writeback. To be certain that a rename() atomically replaces
the previous file contents in the face of crashes and different
filesystems, one has to fsync the old filename, rename the file, fsync
the new filename, fsync the containing directory. This sequence is not
generally adhered to currently; which exposes us to data loss risks. To
avoid having to repeat this arduous sequence, introduce
durable_rename(), which wraps all that.
Also add durable_link_or_rename(). Several places use link() (with a
fallback to rename()) to rename a file, trying to avoid replacing the
target file out of paranoia. Some of those rename sequences need to be
durable as well. There seems little reason extend several copies of the
same logic, so centralize the link() callers.
This commit does not yet make use of the new functions; they're used in
a followup commit.
Author: Michael Paquier, Andres Freund
Discussion: 56583BDD.9060302@2ndquadrant.com
Backpatch: All supported branches
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
An index search using a row comparison such as ROW(a, b) > ROW('x', 'y')
would stop upon reaching a NULL entry in the "b" column, ignoring the
fact that there might be non-NULL "b" values associated with later values
of "a". This happens because _bt_mark_scankey_required() marks the
subsidiary scankey for "b" as required, which is just wrong: it's for
a column after the one with the first inequality key (namely "a"), and
thus can't be considered a required match.
This bit of brain fade dates back to the very beginnings of our support
for indexed ROW() comparisons, in 2006. Kind of astonishing that no one
came across it before Glen Takahashi, in bug #14010.
Back-patch to all supported versions.
Note: the given test case doesn't actually fail in unpatched 9.1, evidently
because the fix for bug #6278 (i.e., stopping at nulls in either scan
direction) is required to make it fail. I'm sure I could devise a case
that fails in 9.1 as well, perhaps with something involving making a cursor
back up; but it doesn't seem worth the trouble.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Coverity and inspection for the issue addressed in fd45d16f found some
questionable code.
Specifically coverity noticed that the wrong length was added in
ReorderBufferSerializeChange() - without immediate negative consequences
as the variable isn't used afterwards. During code-review and testing I
noticed that a bit of space was wasted when allocating tuple bufs in
several places. Thirdly, the debug memset()s in
ReorderBufferGetTupleBuf() reduce the error checking valgrind can do.
Backpatch: 9.4, like c8f621c43.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
In c8f621c43 I forgot to account for MAXALIGN when allocating a new
tuplebuf in ReorderBufferGetTupleBuf(). That happens to currently not
cause active problems on a number of platforms because the affected
pointer is already aligned, but others, like ppc and hppa, trigger this
in the regression test, due to a debug memset clearing memory.
Fix that.
Backpatch: 9.4, like the previous commit.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There were two places in spell.c that supposed that they could search
for a location in a string produced by lowerstr() and then transpose
the offset into the original string. But this fails completely if
lowerstr() transforms any characters into characters of different byte
length, as can happen in Turkish UTF8 for instance.
We'd added some comments about this coding in commit 51e78ab4ff328296,
but failed to realize that it was not merely confusing but wrong.
Coverity complained about this code years ago, but in such an opaque
fashion that nobody understood what it was on about. I'm not entirely
sure that this issue *is* what it's on about, actually, but perhaps
this patch will shut it up -- and in any case the problem is clear.
Back-patch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When decoding the old version of an UPDATE or DELETE change, and if that
tuple was bigger than MaxHeapTupleSize, we either Assert'ed out, or
failed in more subtle ways in non-assert builds. Normally individual
tuples aren't bigger than MaxHeapTupleSize, with big datums toasted.
But that's not the case for the old version of a tuple for logical
decoding; the replica identity is logged as one piece. With the default
replica identity btree limits that to small tuples, but that's not the
case for FULL.
Change the tuple buffer infrastructure to separate allocate over-large
tuples, instead of always going through the slab cache.
This unfortunately requires changing the ReorderBufferTupleBuf
definition, we need to store the allocated size someplace. To avoid
requiring output plugins to recompile, don't store HeapTupleHeaderData
directly after HeapTupleData, but point to it via t_data; that leaves
rooms for the allocated size. As there's no reason for an output plugin
to look at ReorderBufferTupleBuf->t_data.header, remove the field. It
was just a minor convenience having it directly accessible.
Reported-By: Adam Dratwiński
Discussion: CAKg6ypLd7773AOX4DiOGRwQk1TVOQKhNwjYiVjJnpq8Wo+i62Q@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Somehow I managed to flip the order of restoring old & new tuples when
de-spooling a change in a large transaction from disk. This happens to
only take effect when a change is spooled to disk which has old/new
versions of the tuple. That only is the case for UPDATEs where he
primary key changed or where replica identity is changed to FULL.
The tests didn't catch this because either spooled updates, or updates
that changed primary keys, were tested; not both at the same time.
Found while adding tests for the following commit.
Backpatch: 9.4, where logical decoding was added
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Logical decoding's reorderbuffer keeps transactions in an LSN ordered
list for efficiency. To make that's efficiently possible upper-level
xids are forced to be logged before nested subtransaction xids. That
only works though if these records are all looked at: Unfortunately we
didn't do so for e.g. row level locks, which are otherwise uninteresting
for logical decoding.
This could lead to errors like:
"ERROR: subxact logged without previous toplevel record".
It's not sufficient to just look at row locking records, the xid could
appear first due to a lot of other types of records (which will trigger
the transaction to be marked logged with MarkCurrentTransactionIdLoggedIfAny).
So invent infrastructure to tell reorderbuffer about xids seen, when
they'd otherwise not pass through reorderbuffer.c.
Reported-By: Jarred Ward
Bug: #13844
Discussion: 20160105033249.1087.66040@wrigleys.postgresql.org
Backpatch: 9.4, where logical decoding was added
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously recovery_min_apply_delay was applied even before recovery
had reached consistency. This could cause us to wait a long time
unexpectedly for read-only connections to be allowed. It's problematic
because the standby was useless during that wait time.
This patch changes recovery_min_apply_delay so that it's applied once
the database has reached the consistent state. That is, even if the delay
is set, the standby tries to replay WAL records as fast as possible until
it has reached consistency.
Author: Michael Paquier
Reviewed-By: Julien Rouhaud
Reported-By: Greg Clough
Backpatch: 9.4, where recovery_min_apply_delay was added
Bug: #13770
Discussion: http://www.postgresql.org/message-id/20151111155006.2644.84564@wrigleys.postgresql.org
|
| |
|
|
| |
Rushabh Lathia
|
| |
|
|
|
| |
Dmitriy Sarafannikov, reviewed by Michael Paquier and Haribabu Kommi,
with a minor fix by me.
|
| |
|
|
|
|
|
| |
606c0123d627 attempted to reduce cost of index scans using > and <
strategies, though got that completely wrong in a few complex cases.
Revert whole patch until we find a safe optimization.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When adding replication origins in 5aa235042, I somehow managed to set
the timestamp of decoded transactions to InvalidXLogRecptr when decoding
one made without a replication origin. Fix that, and the wrong type of
the new commit_time variable.
This didn't trigger a regression test failure because we explicitly
don't show commit timestamps in the regression tests, as they obviously
are variable. Add a test that checks that a decoded commit's timestamp
is within minutes of NOW() from before the commit.
Reported-By: Weiping Qu
Diagnosed-By: Artur Zakirov
Discussion: 56D4197E.9050706@informatik.uni-kl.de,
56D42918.1010108@postgrespro.ru
Backpatch: 9.5, where 5aa235042 originates.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A thinko concerning nesting depth caused json_to_record() to produce bogus
output if a field of its input object contained a sub-object with a field
name matching one of the requested output column names. Per bug #13996
from Johann Visagie.
I added a regression test case based on his example, plus parallel tests
for json_to_recordset, jsonb_to_record, jsonb_to_recordset. The latter
three do not exhibit the same bug (which suggests that we may be missing
some opportunities to share code...) but testing seems like a good idea
in any case.
Back-patch to 9.4 where these functions were introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This error message was written with only ON SELECT rules in mind, but since
then we also made RETURNING-clause targetlists go through the same logic.
This means that you got a rather off-topic error message if you tried to
add a rule with RETURNING to a table having dropped columns. Ideally we'd
just support that, but some preliminary investigation says that it might be
a significant amount of work. Seeing that Nicklas Avén's complaint is the
first one we've gotten about this in the ten years or so that the code's
been like that, I'm unwilling to put much time into it. Instead, improve
the error report by issuing a different message for RETURNING cases, and
revise the associated comment based on this investigation.
Discussion: 1456176604.17219.9.camel@jordogskog.no
|
| |
|
|
| |
Author: Amit Langote
|
| |
|
|
|
|
|
|
| |
It's harmless, but might confuse readers. Seems to have been introduced
in 6bc8ef0b7f1f1df3. Back-patch, just to avoid cosmetic cross-branch
differences.
Amit Langote
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When converting an RTE with securityQuals into a security barrier
subquery RTE, ensure that the Vars in the new subquery's targetlist
all have varlevelsup = 0 so that they correctly refer to the
underlying base relation being wrapped.
The original code was creating new Vars by copying them from existing
Vars referencing the base relation found elsewhere in the query, but
failed to account for the fact that such Vars could come from sublink
subqueries, and hence have varlevelsup > 0. In practice it looks like
this could only happen with nested security barrier views, where the
outer view has a WHERE clause containing a correlated subquery, due to
the order in which the Vars are processed.
Bug: #13988
Reported-by: Adam Guthrie
Backpatch-to: 9.4, where updatable SB views were introduced
|
| |
|
|
|
|
|
|
|
|
|
| |
A failure partway through PGLC_localeconv() led to a situation where
the next call would call free_struct_lconv() a second time, leading
to free() on already-freed strings, typically leading to a core dump.
Add a flag to remember whether we need to do that.
Per report from Thom Brown. His example case only provokes the failure
as far back as 9.4, but nonetheless this code is obviously broken, so
back-patch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
In 4b4b680c3 I accidentally used sizeof(PrivateRefCountArray) instead of
sizeof(PrivateRefCountEntry) when creating the refcount overflow
hashtable. As the former is bigger than the latter, this luckily only
resulted in a slightly increased memory usage when many buffers are
pinned in a backend.
Reported-By: Takashi Horikawa
Discussion: 73FA3881462C614096F815F75628AFCD035A48C3@BPXM01GP.gisp.nec.co.jp
Backpatch: 9.5, where thew new ref count infrastructure was introduced
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some over-eager copy-and-pasting on my part resulted in a nonsense
result being returned in this case. I have adopted the same pattern for
handling this case as is used in the one argument form of the function,
i.e. we just skip over the code that adds values to the object.
Diagnosis and patch from Michael Paquier, although not quite his
solution.
Fixes bug #13936.
Backpatch to 9.5 where jsonb_object was introduced.
|
| |
|
|
|
|
|
|
|
|
| |
StartupSUBTRANS() incorrectly handled cases near the max pageid in the subtrans
data structure, which in some cases could lead to errors in startup for Hot
Standby.
This patch wraps the pageids correctly, avoiding any such errors.
Identified by exhaustive crash testing by Jeff Janes.
Jeff Janes
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Reportedly, some compilers warn about tests like "c < 0" if c is unsigned,
and hence complain about the character range checks I added in commit
3bb3f42f3749d40b8d4de65871e8d828b18d4a45. This is a bit of a pain since
the regex library doesn't really want to assume that chr is unsigned.
However, since any such reconfiguration would involve manual edits of
regcustom.h anyway, we can put it on the shoulders of whoever wants to
do that to adjust this new range-checking macro correctly.
Per gripes from Coverity and Andres.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It turns out that on FreeBSD-derived platforms (including OS X), the
*scanf() family of functions is pretty much brain-dead about multibyte
characters. In particular it will apply isspace() to individual bytes
of input even when those bytes are part of a multibyte character, thus
allowing false recognition of a field-terminating space.
We appear to have little alternative other than instituting a coding
rule that *scanf() is not to be used if the input string might contain
multibyte characters. (There was some discussion of relying on "%ls",
but that probably just moves the portability problem somewhere else,
and besides it doesn't fully prevent BSD *scanf() from using isspace().)
This patch is a down payment on that: it gets rid of use of sscanf()
to parse ispell dictionary files, which are certainly at great risk
of having a problem. The code is cleaner this way anyway, though
a bit longer.
In passing, improve a few comments.
Report and patch by Artur Zakirov, reviewed and somewhat tweaked by me.
Back-patch to all supported branches.
|
| |
|
|
|
| |
Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: f323fead9293175a0c3320116c97e4be56b9be61
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, our regex code defined CHR_MAX as 0xfffffffe, which is a
bad choice because it is outside the range of type "celt" (int32).
Characters approaching that limit could lead to infinite loops in logic
such as "for (c = a; c <= b; c++)" where c is of type celt but the
range bounds are chr. Such loops will work safely only if CHR_MAX+1
is representable in celt, since c must advance to beyond b before the
loop will exit.
Fortunately, there seems no reason not to restrict CHR_MAX to 0x7ffffffe.
It's highly unlikely that Unicode will ever assign codes that high, and
none of our other backend encodings need characters beyond that either.
In addition to modifying the macro, we have to explicitly enforce character
range restrictions on the values of \u, \U, and \x escape sequences, else
the limit is trivially bypassed.
Also, the code for expanding case-independent character ranges in bracket
expressions had a potential integer overflow in its calculation of the
number of characters it could generate, which could lead to allocating too
small a character vector and then overwriting memory. An attacker with the
ability to supply arbitrary regex patterns could easily cause transient DOS
via server crashes, and the possibility for privilege escalation has not
been ruled out.
Quite aside from the integer-overflow problem, the range expansion code was
unnecessarily inefficient in that it always produced a result consisting of
individual characters, abandoning the knowledge that we had a range to
start with. If the input range is large, this requires excessive memory.
Change it so that the original range is reported as-is, and then we add on
any case-equivalent characters that are outside that range. With this
approach, we can bound the number of individual characters allowed without
sacrificing much. This patch allows at most 100000 individual characters,
which I believe to be more than the number of case pairs existing in
Unicode, so that the restriction will never be hit in practice.
It's still possible for range() to take awhile given a large character code
range, so also add statement-cancel detection to its loop. The downstream
function dovec() also lacked cancel detection, and could take a long time
given a large output from range().
Per fuzz testing by Greg Stark. Back-patch to all supported branches.
Security: CVE-2016-0773
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In 61444bfb we started to allow HAVING clauses to be fully pushed down
into WHERE, even when grouping sets are in use. That turns out not to
work correctly, because grouping sets can "produce" NULLs, meaning that
filtering in WHERE and HAVING can have different results, even when no
aggregates or volatile functions are involved.
Instead only allow pushdown of empty grouping sets.
It'd be nice to do better, but the exact mechanics of deciding which
cases are safe are still being debated. It's important to give correct
results till we find a good solution, and such a solution might not be
appropriate for backpatching anyway.
Bug: #13863
Reported-By: 'wrb'
Diagnosed-By: Dean Rasheed
Author: Andrew Gierth
Reviewed-By: Dean Rasheed and Andres Freund
Discussion: 20160113183558.12989.56904@wrigleys.postgresql.org
Backpatch: 9.5, where grouping sets were introduced
|
| |
|
|
|
|
|
|
|
|
|
| |
The parser doesn't allow qualification of column names appearing in
these clauses, but ruleutils.c would sometimes qualify them, leading
to dump/reload failures. Per bug #13891 from Onder Kalaci.
(In passing, make stanzas in ruleutils.c that save/restore varprefix
more consistent.)
Peter Geoghegan
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 45f6240a8fa9d355 added an assumption in ExecHashIncreaseNumBatches
and ExecHashIncreaseNumBuckets that they could find all tuples in the main
hash table by iterating over the "dense storage" introduced by that patch.
However, ExecHashRemoveNextSkewBucket continued its old practice of simply
re-linking deleted skew tuples into the main table's hashchains. Hence,
such tuples got lost during any subsequent increase in nbatch or nbuckets,
and would never get joined, as reported in bug #13908 from Seth P.
I (tgl) think that the aforesaid commit has got multiple design issues
and should be reworked rather completely; but there is no time for that
right now, so band-aid the problem by making ExecHashRemoveNextSkewBucket
physically copy deleted skew tuples into the "dense storage" arena.
The added test case is able to exhibit the problem by means of fooling the
planner with a WHERE condition that it will underestimate the selectivity
of, causing the initial nbatch estimate to be too small.
Tomas Vondra and Tom Lane. Thanks to David Johnston for initial
investigation into the bug report.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 30d7ae3c76d2de144232ae6ab328ca86b70e72c3 introduced an HJDEBUG
stanza that probably didn't compile at the time, and definitely doesn't
compile now, because it refers to a nonexistent variable. It doesn't seem
terribly useful anyway, so just get rid of it.
While I'm fooling with it, use %z modifier instead of the obsolete hack of
casting size_t to unsigned long, and include the HashJoinTable's address in
each printout so that it's possible to distinguish the activities of
multiple hashjoins occurring in one query.
Noted while trying to use HJDEBUG to investigate bug #13908. Back-patch
to 9.5, because code that doesn't compile is certainly not very helpful.
|
| |
|
|
|
|
|
| |
Future PL/Java versions will close CVE-2016-0766 by making these GUCs
PGC_SUSET. This PostgreSQL change independently mitigates that PL/Java
vulnerability, helping sites that update PostgreSQL more frequently than
PL/Java. Back-patch to 9.1 (all supported versions).
|
| |
|
|
|
|
|
| |
Failure to do this can cause AFTER ROW triggers or RETURNING expressions
that reference this field to misbehave.
Etsuro Fujita, reviewed by Thom Brown
|
| |
|
|
|
|
|
|
|
|
|
| |
Commit e09996ff8dee3f70 was one brick shy of a load: it didn't insist
that the detected JSON number be the whole of the supplied string.
This allowed inputs such as "2016-01-01" to be misdetected as valid JSON
numbers. Per bug #13906 from Dmitry Ryabov.
In passing, be more wary of zero-length input (I'm not sure this can
happen given current callers, but better safe than sorry), and do some
minor cosmetic cleanup.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
KNN GiST with recheck flag should return to executor the same type as ordering
operator, GiST detects this type by looking to return type of function which
implements ordering operator. But occasionally detecting code works after
replacing ordering operator function to distance support function.
Distance support function always returns float8, so, detecting code get float8
instead of actual return type of ordering operator.
Built-in opclasses don't have ordering operator which doesn't return
non-float8 value, so, tests are impossible here, at least now.
Backpatch to 9.5 where lozzy KNN was introduced.
Author: Alexander Korotkov
Report by: Artur Zakirov
|
