| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
| |
If OID wraparound should occur while in standalone mode (unlikely but
possible), we want to advance the counter to FirstNormalObjectId not
FirstBootstrapObjectId. Otherwise, user objects might be created with OIDs
in the system-reserved range. That isn't immediately harmful but it poses
a risk of conflicts during future pg_upgrade operations.
Noted by Andres Freund. Back-patch to all supported branches, since all of
them are supported sources for pg_upgrade operations.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This case doesn't normally happen, because the planner usually clamps
all row estimates to at least one row; but I found that it can arise
when dealing with relations excluded by constraints. Without a defense,
estimate_num_groups() can return zero, which leads to divisions by zero
inside the planner as well as assertion failures in the executor.
An alternative fix would be to change set_dummy_rel_pathlist() to make
the size estimate for a dummy relation 1 row instead of 0, but that seemed
pretty ugly; and probably someday we'll want to drop the convention that
the minimum rowcount estimate is 1 row.
Back-patch to 8.4, as the problem can be demonstrated that far back.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit d22a09dc70f9830fa78c1cd1a3a453e4e473d354 introduced official support
for GiST consistentFns that want to cache data using the FmgrInfo fn_extra
pointer: the idea was to preserve the cached values across gistrescan(),
whereas formerly they'd been leaked. However, there was an oversight in
that, namely that multiple scan keys might reference the same column's
consistentFn; the code would result in propagating the same cache value
into multiple scan keys, resulting in crashes or wrong answers. Use a
separate array instead to ensure that each scan key keeps its own state.
Per bug #8143 from Joel Roller. Back-patch to 9.2 where the bug was
introduced.
|
| |
|
|
|
|
|
|
|
|
| |
exclusion."
This reverts commit 15b0421002624919c62ae3c6574af2a8452bf6c4. Per
complaint from Robert Haas, that patch caused crashes on appendrel
cases, and it didn't fix all forms of the problem anyway. Consensus
is we'll leave this problem alone in the back branches, at least
for now.
|
| |
|
|
|
|
|
| |
WAL segment means a 16 MB physical WAL file; this comment meant a logical
4 GB log file.
Amit Langote. Apply to backbranches only, as the comment is gone in master.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A view defined as "select <something> where false" had the curious property
that the system wouldn't check whether users had the privileges necessary
to select from it. More generally, permissions checks could be skipped
for tables referenced in sub-selects or views that were proven empty by
constraint exclusion (although some quick testing suggests this seldom
happens in cases of practical interest). This happened because the planner
failed to include rangetable entries for such tables in the finished plan.
This was noticed in connection with erroneous handling of materialized
views, but actually the issue is quite unrelated to matviews. Therefore,
revert commit 200ba1667b3a8d7a9d559d2f05f83d209c9d8267 in favor of a more
direct test for the real problem.
Back-patch to 9.2 where the bug was introduced (by commit
7741dd6590073719688891898e85f0cb73453159).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a follow-up to the earlier fix, which changed the recycling logic
to recycle WAL segments under the current recovery target timeline. That
turns out to be a bad idea, because installing a recycled segment with
a TLI higher than what we're recovering at the moment means that the recovery
logic will find the recycled WAL segment and try to replay it. It will fail,
but but the mere presence of such a WAL segment will mask any other, real,
file with the same log/seg, but smaller TLI.
Per report from Mitsumasa Kondo. Apply to 9.1 and 9.2, like the previous
fix. Master was already doing this differently; this patch makes 9.1 and
9.2 to do the same thing as master.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch gets rid of the concept of, and infrastructure for,
non-canonical PathKeys; we now only ever create canonical pathkey lists.
The need for non-canonical pathkeys came from the desire to have
grouping_planner initialize query_pathkeys and related pathkey lists before
calling query_planner. However, since query_planner didn't actually *do*
anything with those lists before they'd been made canonical, we can get rid
of the whole mess by just not creating the lists at all until the point
where we formerly canonicalized them.
There are several ways in which we could implement that without making
query_planner itself deal with grouping/sorting features (which are
supposed to be the province of grouping_planner). I chose to add a
callback function to query_planner's API; other alternatives would have
required adding more fields to PlannerInfo, which while not bad in itself
would create an ABI break for planner-related plugins in the 9.2 release
series. This still breaks ABI for anything that calls query_planner
directly, but it seems somewhat unlikely that there are any such plugins.
I had originally conceived of this change as merely a step on the way to
fixing bug #8049 from Teun Hoogendoorn; but it turns out that this fixes
that bug all by itself, as per the added regression test. The reason is
that now get_eclass_for_sort_expr is adding the ORDER BY expression at the
end of EquivalenceClass creation not the start, and so anything that is in
a multi-member EquivalenceClass has already been created with correct
em_nullable_relids. I am suspicious that there are related scenarios in
which we still need to teach get_eclass_for_sort_expr to compute correct
nullable_relids, but am not eager to risk destabilizing either 9.2 or 9.3
to fix bugs that are only hypothetical. So for the moment, do this and
stop here.
Back-patch to 9.2 but not to earlier branches, since they don't exhibit
this bug for lack of join-clause-movement logic that depends on
em_nullable_relids being correct. (We might have to revisit that choice
if any related bugs turn up.) In 9.2, don't change the signature of
make_pathkeys_for_sortclauses nor remove canonicalize_pathkeys, so as
not to risk more plugin breakage than we have to.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Patch b19e4250b45e91c9cbdd18d35ea6391ab5961c8d attempted to
preserve existing behavior regarding statistics generation in the
case that a truncation attempt was canceled due to lock conflicts.
It failed to do this accurately in two regards: (1) autovacuum had
previously generated statistics if the truncate attempt failed to
initially get the lock rather than having started the attempt, and
(2) the VACUUM ANALYZE command had always generated statistics.
Both of these changes were unintended, and are reverted by this
patch. On review, there seems to be consensus that the previous
failure to generate statistics when the truncate was terminated
was more an unfortunate consequence of how that effort was
previously terminated than a feature we want to keep; so this
patch generates statistics even when an autovacuum truncation
attempt terminates early. Another unintended change which is kept
on the basis that it is an improvement is that when a VACUUM
command is truncating, it will the new heuristic for avoiding
blocking other processes, rather than keeping an
AccessExclusiveLock on the table for however long the truncation
takes.
Per multiple reports, with some renaming per patch by Jeff Janes.
Backpatch to 9.0, where problem was created.
|
| |
|
|
|
|
|
|
|
| |
There was a high probability of two or more concurrent C.I.C. commands
deadlocking just before completion, because each would wait for the others
to release their reference snapshots. Fix by releasing the snapshot
before waiting for other snapshots to go away.
Per report from Paul Hinze. Back-patch to all active branches.
|
| |
|
|
| |
Peter Geoghegan
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When creating or manipulating a cached plan for a transaction control
command (particularly ROLLBACK), we must not perform any catalog accesses,
since we might be in an aborted transaction. However, plancache.c busily
saved or examined the search_path for every cached plan. If we were
unlucky enough to do this at a moment where the path's expansion into
schema OIDs wasn't already cached, we'd do some catalog accesses; and with
some more bad luck such as an ill-timed signal arrival, that could lead to
crashes or Assert failures, as exhibited in bug #8095 from Nachiket Vaidya.
Fortunately, there's no real need to consider the search path for such
commands, so we can just skip the relevant steps when the subject statement
is a TransactionStmt. This is somewhat related to bug #5269, though the
failure happens during initial cached-plan creation rather than
revalidation.
This bug has been there since the plan cache was invented, so back-patch
to all supported branches.
|
| |
|
|
|
|
| |
Throw an error instead.
Backpatch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
| |
The old formula didn't take into account that each WAL sender process needs
a spinlock. We had also already exceeded the fixed number of spinlocks
reserved for misc purposes (10). Bump that to 30.
Backpatch to 9.0, where WAL senders were introduced. If I counted correctly,
9.0 had exactly 10 predefined spinlocks, and 9.1 exceeded that, but bump the
limit in 9.0 too because 10 is uncomfortably close to the edge.
|
| |
|
|
|
|
|
|
| |
The point of turning off track_activities is to avoid this reporting
overhead, but a thinko in commit 4f42b546fd87a80be30c53a0f2c897acb826ad52
caused pgstat_report_activity() to perform half of its updates anyway.
Fix that, and also make sure that we clear all the now-disabled fields
when transitioning to the non-reporting state.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
An oversight in commit e710b65c1c56ca7b91f662c63d37ff2e72862a94 allowed
database names beginning with "-" to be treated as though they were secure
command-line switches; and this switch processing occurs before client
authentication, so that even an unprivileged remote attacker could exploit
the bug, needing only connectivity to the postmaster's port. Assorted
exploits for this are possible, some requiring a valid database login,
some not. The worst known problem is that the "-r" switch can be invoked
to redirect the process's stderr output, so that subsequent error messages
will be appended to any file the server can write. This can for example be
used to corrupt the server's configuration files, so that it will fail when
next restarted. Complete destruction of database tables is also possible.
Fix by keeping the database name extracted from a startup packet fully
separate from command-line switches, as had already been done with the
user name field.
The Postgres project thanks Mitsumasa Kondo for discovering this bug,
Kyotaro Horiguchi for drafting the fix, and Noah Misch for recognizing
the full extent of the danger.
Security: CVE-2013-1899
|
| |
|
|
|
|
|
|
|
|
|
| |
The pg_start_backup() and pg_stop_backup() functions checked the privileges
of the initially-authenticated user rather than the current user, which is
wrong. For example, a user-defined index function could successfully call
these functions when executed by ANALYZE within autovacuum. This could
allow an attacker with valid but low-privilege database access to interfere
with creation of routine backups. Reported and fixed by Noah Misch.
Security: CVE-2013-1901
|
| |
|
|
|
|
|
|
|
|
|
|
| |
In commit 0f61d4dd1b4f95832dcd81c9688dac56fd6b5687, I added code to copy up
column width estimates for each column of a subquery. That code supposed
that the subquery couldn't have any output columns that didn't correspond
to known columns of the current query level --- which is true when a query
is parsed from scratch, but the assumption fails when planning a view that
depends on another view that's been redefined (adding output columns) since
the upper view was made. This results in an assertion failure or even a
crash, as per bug #8025 from lindebg. Remove the Assert and instead skip
the column if its resno is out of the expected range.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, if the postmaster initialized OpenSSL's PRNG (which it will do
when ssl=on in postgresql.conf), the same pseudo-random state would be
inherited by each forked child process. The problem is masked to a
considerable extent if the incoming connection uses SSL encryption, but
when it does not, identical pseudo-random state is made available to
functions like contrib/pgcrypto. The process's PID does get mixed into any
requested random output, but on most systems that still only results in 32K
or so distinct random sequences available across all Postgres sessions.
This might allow an attacker who has database access to guess the results
of "secure" operations happening in another session.
To fix, forcibly reset the PRNG after fork(). Each child process that has
need for random numbers from OpenSSL's generator will thereby be forced to
go through OpenSSL's normal initialization sequence, which should provide
much greater variability of the sequences. There are other ways we might
do this that would be slightly cheaper, but this approach seems the most
future-proof against SSL-related code changes.
This has been assigned CVE-2013-1900, but since the issue and the patch
have already been publicized on pgsql-hackers, there's no point in trying
to hide this commit.
Back-patch to all supported branches.
Marko Kreen
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
In a heap update, if the old and new tuple were on different pages, and the
new page no longer existed (because it was subsequently truncated away by
vacuum), heap_xlog_update forgot to release the pin on the old buffer. This
bug was introduced by the "Fix multiple problems in WAL replay" patch,
commit 3bbf668de9f1bc172371681e80a4e769b6d014c8 (on master branch).
With full_page_writes=off, this triggered an "incorrect local pin count"
error later in replay, if the old page was vacuumed.
This fixes bug #7969, reported by Yunong Xiao. Backpatch to 9.0, like the
commit that introduced this bug.
|
| |
|
|
|
|
|
|
| |
If you have clusters of different versions pointing to the same tablespace
location, we would incorrectly include all the data belonging to the other
versions, too.
Fixes bug #7986, reported by Sergey Burladyan.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When RETURNING is specified, ExecDelete would return a virtual-tuple slot
that could contain pointers into an already-unpinned disk buffer. Another
process could change the buffer contents before we get around to using the
data, resulting in garbage results or even a crash. This seems of fairly
low probability, which may explain why there are no known field reports of
the problem, but it's definitely possible. Fix by forcing the result slot
to be "materialized" before we release pin on the disk buffer.
Back-patch to 9.0; in earlier branches there is no bug because
ExecProcessReturning sent the tuple to the destination immediately. Also,
this is already fixed in HEAD as part of the writable-foreign-tables patch
(where the fix is necessary for DELETE RETURNING to work at all with
postgres_fdw).
|
| |
|
|
|
|
|
|
|
|
|
| |
The previous coding of this function could get into situations where it
would never terminate, because successive passes would re-add EMPTY arcs
that had been removed by the previous pass. Rewrite the function
completely using a new algorithm that is guaranteed to terminate, and
also seems to be usually faster than the old one. Per Tcl bugs 3604074
and 3606683.
Tom Lane and Don Porter
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
If we were about to enter archive recovery after crash recovery, we scanned
the archive for the latest tli history file, and set the recovery target
timeline to that. However, when we actually tried to read the history file,
we would not fetch the file from the archive, because we were not in archive
recovery yet.
To fix, make readTimeLineHistory and existsTimeLineHistory to always fetch
the file from archive if archive recovery is requested, even if we're not in
archive recovery yet.
Backpatch to 9.2. Mitsumasa KONDO
|
| |
|
|
|
|
|
|
|
|
|
| |
I missed to returns in the middle of ReadRecord function in my previous fix.
If a WAL file was not found at all during crash recovery, XLogPageRead would
return 'false', and ReadRecord would return without entering archive recovery.
9.2 only. In master, the code is structured differently and does not have this
problem.
Kyotaro HORIGUCHI, Mitsumasa KONDO and me.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
formatting.c used locale-dependent case folding rules in some code paths
where the result isn't supposed to be locale-dependent, for example
to_char(timestamp, 'DAY'). Since the source data is always just ASCII
in these cases, that usually didn't matter ... but it does matter in
Turkish locales, which have unusual treatment of "i" and "I". To confuse
matters even more, the misbehavior was only visible in UTF8 encoding,
because in single-byte encodings we used pg_toupper/pg_tolower which
don't have locale-specific behavior for ASCII characters. Fix by providing
intentionally ASCII-only case-folding functions and using these where
appropriate. Per bug #7913 from Adnan Dursun. Back-patch to all active
branches, since it's been like this for a long time.
|
| |
|
|
|
|
| |
I fixed this code back in commit 841b4a2d5, but didn't think carefully
enough about the behavior near zero, which meant it improperly rejected
1999-12-31 24:00:00. Per report from Magnus Hagander.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
fmgr_sql had been designed on the assumption that the FmgrInfo it's called
with has only query lifespan. This is demonstrably unsafe in connection
with range types, as shown in bug #7881 from Andrew Gierth. Fix things
so that we re-generate the function's cache data if the (sub)transaction
it was made in is no longer active.
Back-patch to 9.2. This might be needed further back, but it's not clear
whether the case can realistically arise without range types, so for now
I'll desist from back-patching further.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
parseqatom() failed to check for an error return (NULL result) from its
recursive call to parsebranch(), and in consequence could crash with a
null-pointer dereference after an error return. This bug has been there
since day one, but wasn't noticed before, probably because most error cases
in parsebranch() didn't actually lead to returning NULL. Add the missing
error check, and also tweak parsebranch() to exit in a less indirect
fashion after a call to parseqatom() fails.
Report by Tomasz Karlik, fix by me.
|
| | |
|
| | |
|
| |
|
|
|
|
| |
We must still initialize minRecoveryPoint if we start straight with archive
recovery, e.g when recovering from a normal base backup taken with
pg_start/stop_backup. Otherwise we never consider the system consistent.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If you create a base backup using an atomic filesystem snapshot, and try to
perform PITR starting from that base backup, or if you just kill a master
server and create recovery.conf to put it into standby mode, we don't know
how far we need to recover before reaching consistency. Normally in crash
recovery, we replay all the WAL present in pg_xlog, and assume that we're
consistent after that. And normally in archive recovery, minRecoveryPoint,
backupEndRequired, or backupEndPoint is set in the control file, indicating
how far we need to replay to reach consistency. But if the server was
previously up and running normally, and you kill -9 it or take an atomic
filesystem snapshot, none of those fields are set in the control file.
The solution is to perform crash recovery first, replaying all the WAL in
pg_xlog. After that's done, we assume that the system is consistent like in
normal crash recovery, and switch to archive recovery mode after that.
Per report from Kyotaro HORIGUCHI. In his scenario, recovery.conf was
created after "pg_ctl stop -m i". I'm not sure we need to support that exact
scenario, but we should support backing up using a filesystem snapshot,
which looks identical.
This issue goes back to at least 9.0, where hot standby was introduced and
we started to track when consistency is reached. In 9.1 and 9.2, we would
open up for hot standby too early, and queries could briefly see an
inconsistent state. But 9.2 made it more visible, as we started to PANIC if
we see a reference to a non-existing page during recovery, if we've already
reached consistency. This is a fairly big patch, so back-patch to 9.2 only,
where the issue is more visible. We can consider back-patching further after
this has received some more testing in 9.2 and master.
|
| |
|
|
|
|
|
|
|
|
| |
Revert my earlier fix for the bug that unarchived WAL files get deleted on
crash recovery, commit c9cc7e05c6d82a9781883a016c70d95aa4923122. We create
a .done file for files streamed or restored from archive, so the WAL file
recycling logic used during normal operation works just as well during
archive recovery.
Per Fujii Masao's suggestion.
|
| |
|
|
|
| |
Bug reported by Jehan-Guillaume (ioguix) de Rorthais. This was introduced
with the change to keep WAL files restored from archive in pg_xlog, in 9.2.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since a backend adds itself to the global listener array during
Exec_ListenPreCommit, it's inappropriate for it to remove itself during
Exec_UnlistenCommit or Exec_UnlistenAllCommit --- that leads to failure
when committing a transaction that did UNLISTEN then LISTEN, since we end
up not registered though we should be. (This leads to missing later
notifications, or to Assert failures in assert-enabled builds.) Instead
deal with deregistering at the bottom of AtCommit_Notify, when we know the
final state of the listenChannels list.
Also, simplify the representation of registration status by replacing the
transient backendHasExecutedInitialListen flag with an amRegisteredListener
flag.
Per report from Greg Sabino Mullane. Back-patch to 9.0, where the problem
was introduced during the LISTEN/NOTIFY rewrite.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After further reflection I was unconvinced that the existing coding is
guaranteed to return valid union datums in every code path for multi-column
indexes. Fix that by forcing a gistunionsubkey() call at the end of the
recursion. Having done that, we can remove some clearly-redundant calls
elsewhere. This should be a little faster for multi-column indexes (since
the previous coding would uselessly do such a call for each column while
unwinding the recursion), as well as much harder to break.
Also, simplify the handling of cases where one side or the other of a
primary split contains only don't-care tuples. The previous coding used a
very ugly hack in removeDontCares() that essentially forced one random
tuple to be treated as non-don't-care, providing a random initial choice of
seed datum for the secondary split. It seems unlikely that that method
will give better-than-random splits. Instead, treat such a split as
degenerate and just let the next column determine the split, the same way
that we handle fully degenerate cases where the two sides produce identical
union datums.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This LOG message was put in over five years ago with the evident
expectation that we'd make all GiST opclasses support secondary split
directly. However, no such thing ever happened, and indeed the number of
opclasses supporting it decreased to zero in 9.2. The reason is that
improving on the default implementation isn't that easy --- the
opclass-specific code that did exist, before 9.2, doesn't appear to have
been any improvement over the default.
Hence, remove the message altogether. There's certainly no point in
nagging users about this in released branches, but I doubt that we'll
ever implement complete opclass-specific support anyway.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Not only is this implementation of secondary-split not better than the
default implementation in gistsplit.c, it's actually worse. The gistsplit.c
code at least looks to see if switching the left and right sides would make
a better merge with the previously-split tuples, while this doesn't.
In any case it's rather useless to support secondary split only in an edge
case. There used to be more complete support for it here (in chooseLR()),
but that was removed in commit 7f3bd86843e5aad84585a57d3f6b80db3c609916.
It appears to me though that the chooseLR() code was really isomorphic to
the default implementation, since it was still based on choosing the cheaper
way of adding two sub-split vectors that had been chosen without regard to
the primary split initially. I think an implementation of secondary split
that could beat the default implementation would have to be pretty fully
integrated into the split algorithm, not plastered on at the end.
Back-patch to 9.2, but not further; previous branches have the chooseLR()
code which I don't feel a great need to mess with. This is mainly so we
just have two behaviors and not three among the various branches (IOW, this
patch is cleanup for commit 7f3bd86843e5aad84585a57d3f6b80db3c609916's
incomplete removal of secondary-split support).
|
| |
|
|
|
|
|
|
|
|
| |
Improve comments, rename some variables and functions, slightly simplify
a couple of APIs, in an attempt to make this code readable by people other
than its original author.
Even though this is essentially just cosmetic, back-patch to all active
branches, because otherwise it's going to make back-patching future fixes
in this file very painful.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While there's considerable doubt that we want fuzzy behavior in the
geometric operators at all (let alone as currently implemented), nobody is
stepping forward to redesign that stuff. In the meantime it behooves us
to make sure that index searches agree with the behavior of the underlying
operators. This patch fixes two problems in this area.
First, gist_box_same was using fuzzy equality, but it really needs to use
exact equality to prevent not-quite-identical upper index keys from being
treated as identical, which for example would prevent an existing upper
key from being extended by an amount less than epsilon. This would result
in inconsistent indexes. (The next release notes will need to recommend
that users reindex GiST indexes on boxes, polygons, circles, and points,
since all four opclasses use gist_box_same.)
Second, gist_point_consistent used exact comparisons for upper-page
comparisons in ~= searches, when it needs to use fuzzy comparisons to
ensure it finds all matches; and it used fuzzy comparisons for point <@ box
searches, when it needs to use exact comparisons because that's what the
<@ operator (rather inconsistently) does.
The added regression test cases illustrate all three misbehaviors.
Back-patch to all active branches. (8.4 did not have GiST point_ops,
but it still seems prudent to apply the gist_box_same patch to it.)
Alexander Korotkov, reviewed by Noah Misch
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit af7914c6627bcf0b0ca614e9ce95d3f8056602bf, which added the TIMING
option to EXPLAIN, had an oversight: if the TIMING option is disabled
then control in InstrStartNode() goes through an elog(DEBUG2) call, which
typically does nothing but takes a noticeable amount of time to do it.
Tweak the logic to avoid that.
In HEAD, also change the elog(DEBUG2)'s in instrument.c to elog(ERROR).
It's not very clear why they weren't like that to begin with, but this
episode shows that not complaining more vociferously about misuse is
likely to do little except allow bugs to remain hidden.
While at it, adjust some code that was making possibly-dangerous
assumptions about flag bits being in the rightmost byte of the
instrument_options word.
Problem reported by Pavel Stehule (via Tomas Vondra).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When considering a non-last column in a multi-column GiST index,
gistsplit.c tries to improve on the split chosen by the opclass-specific
pickSplit function by considering penalties for the next column. However,
there were two bugs in this code: it failed to recompute the union keys for
the leftmost index columns, even though these might well change after
reassigning tuples; and it included the old union keys in the recomputation
for the columns it did recompute, so that those keys couldn't get smaller
even if they should. The first problem could result in an invalid index
in which searches wouldn't find index entries that are in fact present;
the second would make the index less efficient to search.
Both of these errors were caused by misuse of gistMakeUnionItVec, whose
API was designed in a way that just begged such errors to be made. There
is no situation in which it's safe or useful to compute the union keys for
a subset of the index columns, and there is no caller that wants any
previous union keys to be included in the computation; so the undocumented
choice to treat the union keys as in/out rather than pure output parameters
is a waste of code as well as being dangerous.
Hence, rather than just making a minimal patch, I've changed the API of
gistMakeUnionItVec to remove the "startkey" parameter (it now always
processes all index columns) and treat the attr/isnull arrays as purely
output parameters.
In passing, also get rid of a couple of unnecessary and dangerous uses
of static variables in gistutil.c. It's remarkable that the one in
gistMakeUnionKey hasn't given us portability troubles before now, because
in addition to posing a re-entrancy hazard, it was unsafely assuming that
a static char[] array would have at least Datum alignment.
Per investigation of a trouble report from Tomas Vondra. (There are also
some bugs in contrib/btree_gist to be fixed, but that seems like material
for a separate patch.) Back-patch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Normally, we suppress sending a tabstats message to the collector unless
there were some actual table stats to send. However, during backend exit
we should force out the message if there are any transaction commit/abort
counts to send, else the session's last few commit/abort counts will never
get reported at all. We had logic for this, but the short-circuit test
at the top of pgstat_report_stat() ignored the "force" flag, with the
consequence that session-ending transactions that touched no database-local
tables would not get counted. Seems to be an oversight in my commit
641912b4d17fd214a5e5bae4e7bb9ddbc28b144b, which added the "force" flag.
That was back in 8.3, so back-patch to all supported versions.
|
| |
|
|
|
|
| |
Backpatch to release 9.2
Brar Piening and Noah Misch, reviewed by Craig Ringer.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This function was misdeclared to take cstring when it should take internal.
This at least allows crashing the server, and in principle an attacker
might be able to use the function to examine the contents of server memory.
The correct fix is to adjust the system catalog contents (and fix the
regression tests that should have caught this but failed to). However,
asking users to correct the catalog contents in existing installations
is a pain, so as a band-aid fix for the back branches, install a check
in enum_recv() to make it throw error if called with a cstring argument.
We will later revert this in HEAD in favor of correcting the catalogs.
Our thanks to Sumit Soni (via Secunia SVCRP) for reporting this issue.
Security: CVE-2013-0255
|
| |
|
|
| |
Revert commit 84725aa5efe11688633b553e58113efce4181f2e
|
| | |
|
| |
|
|
| |
Following bug analysis of #7819 by Tom Lane
|
