| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1349d2790 added code to adjust the PlannerInfo.group_pathkeys so that
ORDER BY / DISTINCT aggregate functions could obtain pre-sorted inputs
to allow faster execution. That commit forgot to adjust the pathkeys in
create_agg_path(). Some code in there assumed that it was always fine
to make the AggPath's pathkeys the same as its subpath's. That seems to
have been ok up until 1349d2790, but since that commit adds pathkeys for
columns which are within the aggregate function, those columns won't be
available above the aggregate node. This can result in "could not find
pathkey item to sort" during create_plan().
The fix here is to strip off the additional pathkeys added by
adjust_group_pathkeys_for_groupagg(). It seems that the pathkeys here
will only ever be group_pathkeys, so all we need to do is check if the
length of the pathkey list is longer than the num_groupby_pathkeys and
get rid of the additional ones only if we see extras.
Reported-by: Justin Pryzby
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/ZQhYYRhUxpW3PSf9%40telsasoft.com
Backpatch-through: 16, where 1349d2790 was introduced
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Going by c4a1933b4, b33ef397a and 05893712c (to name just a few), it seems
that maintaining debug_print_rel() is often forgotten. In the case of
c4a1933b4, it was several years before anyone noticed that a path type
was not handled by debug_print_rel(). (debug_print_rel() is only
compiled when building with OPTIMIZER_DEBUG).
After a quick survey on the pgsql-hackers mailing list, nobody came
forward to admit that they use OPTIMIZER_DEBUG. So to prevent any future
maintenance neglect, let's just remove debug_print_rel() and have
OPTIMIZER_DEBUG make use of pprint() instead (as suggested by Tom Lane).
If anyone wants to come forward to claim they make use of
OPTIMIZER_DEBUG in a way that they need debug_print_rel() then they have
around 10 months remaining in the v17 cycle where we could revert this.
If nobody comes forward in that time, then we can likely safely declare
debug_print_rel() as not worth keeping.
Discussion: https://postgr.es/m/CAApHDvoCdjo8Cu2zEZF4-AxWG-90S+pYXAnoDDa9J3xH-OrczQ@mail.gmail.com
|
| |
|
|
|
| |
Reported-by: Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_kHMJDak75y1kBTirv-drS1-knT-7Mpg5LprAjqRJDVA%40mail.gmail.com
|
| |
|
|
| |
Reported-by: Alexander Lakhin
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, B-tree code matches every scan key to every item on the page.
Imagine the ordered B-tree scan for the query like this.
SELECT * FROM tbl WHERE col > 'a' AND col < 'b' ORDER BY col;
The (col > 'a') scan key will be always matched once we find the location to
start the scan. The (col < 'b') scan key will match every item on the page
as long as it matches the last item on the page.
This patch implements prechecking of the scan keys required for directional
scan on beginning of page scan. If precheck is successful we can skip this
scan keys check for the items on the page. That could lead to significant
acceleration especially if the comparison operator is expensive.
Idea from patch by Konstantin Knizhnik.
Discussion: https://postgr.es/m/079c3f8e-3371-abe2-e93c-fc8a0ae3f571%40garret.ru
Reviewed-by: Peter Geoghegan, Pavel Borisov
|
| |
|
|
|
|
|
|
| |
When syslogger starts up, ListenSockets is still NULL. Don't try to
pfree it. Oversight in commit e29c464395.
Reported-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/ZR-uNkgL7m60lWUe@paquier.xyz
|
| |
|
|
|
|
|
| |
This was previously handled by the callers but it can be moved into a
common place.
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da@eisentraut.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
BuildDescForRelation() main job is to convert ColumnDef lists to
pg_attribute/tuple descriptor arrays, which is really mostly an
internal subroutine of DefineRelation() and some related functions,
which is more the remit of tablecmds.c and doesn't have much to do
with the basic tuple descriptor interfaces in tupdesc.c. This is also
supported by observing the header includes we can remove in tupdesc.c.
By moving it over, we can also (in the future) make
BuildDescForRelation() use more internals of tablecmds.c that are not
sensible to be exposed in tupdesc.c.
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da@eisentraut.org
|
| |
|
|
|
|
|
|
|
| |
Previously, this was handled by the callers separately, but it can be
trivially moved into BuildDescForRelation() so that it is handled in a
central place.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da@eisentraut.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Keep track of the used size of the array. That avoids looping through
the whole array in a few places. It doesn't matter from a performance
point of view since the array is small anyway, but this feels less
surprising and is a little less code. Now that we have an explicit
NumListenSockets variable that is statically initialized to 0, we
don't need the loop to initialize the array.
Allocate the array in PostmasterContext. The array isn't needed in
child processes, so this allows reusing that memory. We could easily
make the array resizable now, but we haven't heard any complaints
about the current 64 sockets limit.
Discussion: https://www.postgresql.org/message-id/7bb7ad65-a018-2419-742f-fa5fd877d338@iki.fi
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, the JSON code didn't have to worry too much about freeing
JsonLexContext, because it was never too long-lived. With new features
being added for SQL/JSON this is no longer the case. Add a routine
that knows how to free this struct and apply that to a few places, to
prevent this from becoming problematic.
At the same time, we change the API of makeJsonLexContextCstringLen to
make it receive a pointer to JsonLexContext for callers that want it to
be stack-allocated; it can also be passed as NULL to get the original
behavior of a palloc'ed one.
This also causes an ABI break due to the addition of flags to
JsonLexContext, so we can't easily backpatch it. AFAICS that's not much
of a problem; apparently some leaks might exist in JSON usage of
text-search, for example via json_to_tsvector, but I haven't seen any
complaints about that.
Per Coverity complaint about datum_to_jsonb_internal().
Discussion: https://postgr.es/m/20230808174110.oq3iymllsv6amkih@alvherre.pgsql
|
| |
|
|
|
|
|
|
|
|
|
|
| |
6b94e7a6d did this for ordered append paths to allow fast startup
MergeAppends, however, nothing was done for the Append case.
Here we adjust add_paths_to_append_rel() to have it build an AppendPath
containing the cheapest startup paths from each of the child relations
when the append rel has "consider_startup" set.
Author: Andy Fan, David Rowley
Discussion: https://www.postgresql.org/message-id/CAKU4AWrXSkUV=Pt-gRxQT7EbfUeNssprGyNsB=5mJibFZ6S3ww@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
| |
Ensure we switch to the per-tuple memory context to prevent any memory
leaks of detoasted Datums in MemoizeHash_hash() and MemoizeHash_equal().
Reported-by: Orlov Aleksej
Author: Orlov Aleksej, David Rowley
Discussion: https://postgr.es/m/83281eed63c74e4f940317186372abfd%40cft.ru
Backpatch-through: 14, where Memoize was added
|
| |
|
|
|
|
|
|
|
| |
There was only one caller left, for which this function was overkill.
Also, having it in relcache.c was inappropriate, since it doesn't work
with the relcache at all.
Discussion: https://www.postgresql.org/message-id/flat/f84640e3-00d3-5abd-3f41-e6a19d33c40b@eisentraut.org
|
| |
|
|
|
|
|
|
|
| |
It is unnecessary to include this field in IndexInfo. It is only used
by DDL code, not during execution. It is really only used to pass
local information around between functions in index.c and indexcmds.c,
for which it is clearer to use local variables, like in similar cases.
Discussion: https://www.postgresql.org/message-id/flat/f84640e3-00d3-5abd-3f41-e6a19d33c40b@eisentraut.org
|
| |
|
|
|
|
|
|
|
|
| |
In hopes of putting these where any would-be implementer is sure to
find them, make a placeholder grammar production for ALTER DROP VALUE
and put them there. This is really just a docs patch, though.
Vik Fearing, with a bit more wordsmithing by me
Discussion: https://postgr.es/m/9fffd149-da0f-0c9c-6745-731fb688642a@postgresfriends.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This further reduces the length and complexity of sendFile(),
hopefully make it easier to understand and modify. In addition
to moving some logic into a new function, I took this opportunity
to make a few slight adjustments to sendFile() itself, including
renaming the 'len' variable to 'bytes_done', since we use it to represent
the number of bytes we've already handled so far, not the total
length of the file.
Patch by me, reviewed by David Steele.
Discussion: http://postgr.es/m/CA+TgmoYt5jXH4U6cu1dm9Oe2FTn1aae6hBNhZzJJjyjbE_zYig@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
If checksum verification fails for a particular page, we reread the
page and try one more time. The code that does this somewhat complex
and difficult to follow. Move some of the logic into a new function
and rearrange the code a bit to try to make it clearer. This way,
we don't need the block_retry Boolean, a couple of other variables
move from sendFile() into the new function, and some code is now less
deeply indented.
Patch by me, reviewed by David Steele.
Discussion: http://postgr.es/m/CA+TgmoYt5jXH4U6cu1dm9Oe2FTn1aae6hBNhZzJJjyjbE_zYig@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The code in charge of copying the contents of PgBackendStatus to local
memory could fail on memory allocation because of an overflow on the
amount of memory to use. The overflow can happen when combining a high
value track_activity_query_size (max at 1MB) with a large
max_connections, when both multiplied get higher than INT32_MAX as both
parameters treated as signed integers. This could for example trigger
with the following functions, all calling pgstat_read_current_status():
- pg_stat_get_backend_subxact()
- pg_stat_get_backend_idset()
- pg_stat_get_progress_info()
- pg_stat_get_activity()
- pg_stat_get_db_numbackends()
The change to use MemoryContextAllocHuge() has been introduced in
8d0ddccec636, so backpatch down to 12.
Author: Jakub Wartak
Discussion: https://postgr.es/m/CAKZiRmw8QSNVw2qNK-dznsatQqz+9DkCquxP0GHbbv1jMkGHMA@mail.gmail.com
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Make a few newish calls to appendStringInfo() which have no special
formatting use appendStringInfoString() instead. Also, adjust usages of
appendStringInfoString() which only append a string containing a single
character to make use of appendStringInfoChar() instead.
This makes the code marginally faster, but primarily this change is so
we use the StringInfo type as it was intended to be used.
Discussion: https://postgr.es/m/CAApHDvpXKQmL+r=VDNS98upqhr9yGBhv2Jw3GBFFk_wKHcB39A@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit changes the WAL reader routines so as a FATAL for the
backend or exit(FAILURE) for the frontend is triggered if an allocation
for a WAL record decode fails in walreader.c, rather than treating this
case as bogus data, which would be equivalent to the end of WAL. The
key is to avoid palloc_extended(MCXT_ALLOC_NO_OOM) in walreader.c,
relying on plain palloc() calls.
The previous behavior could make WAL replay finish too early than it
should. For example, crash recovery finishing earlier may corrupt
clusters because not all the WAL available locally was replayed to
ensure a consistent state. Out-of-memory failures would show up
randomly depending on the memory pressure on the host, but one simple
case would be to generate a large record, then replay this record after
downsizing a host, as Ethan Mertz originally reported.
This relies on bae868caf222, as the WAL reader routines now do the
memory allocation required for a record only once its header has been
fully read and validated, making xl_tot_len trustable. Making the WAL
reader react differently on out-of-memory or bogus record data would
require ABI changes, so this is the safest choice for stable branches.
Also, it is worth noting that 3f1ce973467a has been using a plain
palloc() in this code for some time now.
Thanks to Noah Misch and Thomas Munro for the discussion.
Like the other commit, backpatch down to 12, leaving out v11 that will
be EOL'd soon. The behavior of considering a failed allocation as bogus
data comes originally from 0ffe11abd3a0, where the record length
retrieved from its header was not entirely trustable.
Reported-by: Ethan Mertz
Discussion: https://postgr.es/m/ZRKKdI5-RRlta3aF@paquier.xyz
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The retry loop is needed because heap_page_prune() calls
HeapTupleSatisfiesVacuum() and then lazy_scan_prune() does the same
thing again, and they might get different answers due to concurrent
clog updates. But this patch makes heap_page_prune() return the
HeapTupleSatisfiesVacuum() results that it computed back to the
caller, which allows lazy_scan_prune() to avoid needing to recompute
those values in the first place. That's nice both because it eliminates
the need for a retry loop and also because it's cheaper.
Melanie Plageman, reviewed by David Geier, Andres Freund, and me.
Discussion: https://postgr.es/m/CAAKRu_br124qsGJieuYA0nGjywEukhK1dKBfRdby_4yY3E9SXA%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
| |
bgwriter can write out WAL, but did not flush the WAL pgstat counters,
so the writes were not seen in pg_stat_wal.
Back-patch to v14, where pg_stat_wal was introduced.
Author: Nazir Bilal Yavuz
Reviewed-by: Matthias van de Meent, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/CAN55FZ2FPYngovZstr%3D3w1KSEHe6toiZwrurbhspfkXe5UDocg%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
| |
In the README, briefly explain what rmgrdesc functions are, and why
they are in a separate directory. Commit c03c2eae0a added some
guidelines on the preferred output format; move that to the README
too.
Reviewed-by: Melanie Plageman, Peter Geoghegan
Discussion: https://www.postgresql.org/message-id/9159daf7-f42d-781b-458f-1b2cf32cb256%40iki.fi
|
| |
|
|
|
|
| |
This reverts commit 7fbc75b26ed8ec70c729c5e7f8233896c54c900f.
Looks like the LLVM additions may not be totally correct.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adjusts the expression evaluation code for CoerceViaIO and
CoerceToDomain to handle errors softly if needed.
For CoerceViaIo, this means using InputFunctionCallSafe(), which
provides the option to handle errors softly, instead of calling the
type input function directly.
For CoerceToDomain, this simply entails replacing the ereport() in
ExecEvalConstraintCheck() by errsave().
In both cases, the ErrorSaveContext to be used when evaluating the
expression is stored by ExecInitExprRec() in the expression's struct
in the expression's ExprEvalStep. The ErrorSaveContext is passed by
setting ExprState.escontext to point to it when calling
ExecInitExprRec() on the expression whose errors are to be handled
softly.
Note that no call site of ExecInitExprRec() has been changed in this
commit, so there's no functional change. This is intended for
implementing new SQL/JSON expression nodes in future commits that
will use to it suppress errors that may occur during type coercions.
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
|
| |
|
|
|
|
| |
The largest allocation, of xl_tot_len+8192, is in allocate_recordbuf().
Discussion: https://postgr.es/m/20230812211327.GB2326466@rfd.leadboat.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After receiving position data for a lexeme, tsvectorrecv()
advanced its "datalen" value by (npos+1)*sizeof(WordEntry)
where the correct calculation is (npos+1)*sizeof(WordEntryPos).
This accidentally failed to render the constructed tsvector
invalid, but it did result in leaving some wasted space
approximately equal to the space consumed by the position data.
That could have several bad effects:
* Disk space is wasted if the received tsvector is stored into a
table as-is.
* A legal tsvector could get rejected with "maximum total lexeme
length exceeded" if the extra space pushes it over the MAXSTRPOS
limit.
* In edge cases, the finished tsvector could be assigned a length
larger than the allocated size of its palloc chunk, conceivably
leading to SIGSEGV when the tsvector gets copied somewhere else.
The odds of a field failure of this sort seem low, though valgrind
testing could probably have found this.
While we're here, let's express the calculation as
"sizeof(uint16) + npos * sizeof(WordEntryPos)" to avoid the type
pun implicit in the "npos + 1" formulation. It's not wrong
given that WordEntryPos had better be 2 bytes to avoid padding
problems, but it seems clearer this way.
Report and patch by Denis Erokhin. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/009801d9f2d9$f29730c0$d7c59240$@datagile.ru
|
| |
|
|
|
|
|
|
|
|
|
|
| |
In recent releases, such cases fail with "cache lookup failed for
function 0" rather than complaining that the conversion function
doesn't exist as prior versions did. Seems to be a consequence of
sloppy refactoring in commit f82de5c46. Add the missing error check.
Per report from Pierre Fortin. Back-patch to v14 where the
oversight crept in.
Discussion: https://postgr.es/m/20230929163739.3bea46e5.pfortin@pfortin.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 9f8377f7a2 was a little too eager in fetching default values.
Normally this would not matter, but if the default value is not valid
for the type (e.g. a varchar that's too long) it caused an unnecessary
error.
Complaint and fix from Laurenz Albe
Backpatch to release 16.
Discussion: https://postgr.es/m/75a7b7483aeb331aa017328d606d568fc715b90d.camel@cybertec.at
|
| |
|
|
|
|
|
|
|
|
|
|
| |
These options already exist, but you need to specify a column list for
them, which can be cumbersome. We already have the possibility of all
columns for FORCE QUOTE, so this is simply extending that facility to
FORCE_NULL and FORCE_NOT_NULL.
Author: Zhang Mingli
Reviewed-By: Richard Guo, Kyatoro Horiguchi, Michael Paquier.
Discussion: https://postgr.es/m/CACJufxEnVqzOFtqhexF2+AwOKFrV8zHOY3y=p+gPK6eB14pn_w@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ANALYZE on a table with inheritance children analyzes all the child
tables in a loop. When stepping to next child table, it updated the
child rel ID value in the command progress stats, but did not reset
the 'sample_blks_total' and 'sample_blks_scanned' counters.
acquire_sample_rows() updates 'sample_blks_total' as soon as the scan
starts and 'sample_blks_scanned' after processing the first block, but
until then, pg_stat_progress_analyze would display a bogus combination
of the new child table relid with old counter values from the
previously processed child table. Fix by resetting 'sample_blks_total'
and 'sample_blks_scanned' to zero at the same time that
'current_child_table_relid' is updated.
Backpatch to v13, where pg_stat_progress_analyze view was introduced.
Reported-by: Justin Pryzby
Discussion: https://www.postgresql.org/message-id/20230122162345.GP13860%40telsasoft.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Under some circumstances, concurrent MERGE operations could lead to
inconsistent results, that varied according the plan chosen. This was
caused by a lack of rowmarks on the source relation, which meant that
EvalPlanQual rechecking was not guaranteed to return the same source
tuples when re-running the join query.
Fix by ensuring that preprocess_rowmarks() sets up PlanRowMarks for
all non-target relations used in MERGE, in the same way that it does
for UPDATE and DELETE.
Per bug #18103. Back-patch to v15, where MERGE was introduced.
Dean Rasheed, reviewed by Richard Guo.
Discussion: https://postgr.es/m/18103-c4386baab8e355e3%40postgresql.org
|
| |
|
|
|
|
|
|
| |
Reported-by: James Coleman
Discussion: https://postgr.es/m/CAAaqYe9F6uoMhAr+8rMLwvGzaKaSknPA0Wi3Ehtv8pbSYmJq-Q@mail.gmail.com
Backpatch-through: master
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Improve find_base_rel() and find_base_rel_ignore_join() so that they
raise an ERROR if they ever receive a negative relid value in
non-cassert builds. If either of these functions had ever received a
negative relid then they'd have attempted to access memory that does not
belong to simple_rel_array.
Because no evidence has been presented of actual cases where bugs have
caused this to happen, here we take a lightweight approach to checking
for negative values and simply cast both values to uint32 before
performing the comparison. This will cause any negative relids to be
seen as greater than simple_rel_array_size which will ERROR rather than
attempt to access a negative simple_rel_array element. Obviously, the
run-time error is better than a crash, so it makes sense to protect
against this, especially when it can be done without adding any
additional run-time overhead.
There is a slight change here if the functions are ever called with a
relid of 0. This will pass the bounds check, but that array entry
should be NULL (along with the corresponding simple_rte_array entry), so
won't pass the "if (rel)" condition and still fall through and raise an
ERROR.
Author: Ranier Vilela
Reviewed-by: Ashutosh Bapat, David Rowley
Discussion: https://postgr.es/m/CAEudQArQSghBu2gLojg4o_tnHj_x2HcS%3D%2BwewL3NJS8z0VnK%2Bg%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
nbtree's mark/restore processing failed to correctly handle an edge case
involving array key advancement and related search-type scan key state.
Scans with ScalarArrayScalarArrayOpExpr quals requiring mark/restore
processing (for a merge join) could incorrectly conclude that an
affected array/scan key must not have advanced during the time between
marking and restoring the scan's position.
As a result of all this, array key handling within btrestrpos could skip
a required call to _bt_preprocess_keys(). This confusion allowed later
primitive index scans to overlook tuples matching the true current array
keys. The scan's search-type scan keys would still have spurious values
corresponding to the final array element(s) -- not values matching the
first/now-current array element(s).
To fix, remember that "array key wraparound" has taken place during the
ongoing btrescan in a flag variable stored in the scan's state, and use
that information at the point where btrestrpos decides if another call
to _bt_preprocess_keys is required.
Oversight in commit 70bc5833, which taught nbtree to handle array keys
during mark/restore processing, but missed this subtlety. That commit
was itself a bug fix for an issue in commit 9e8da0f7, which taught
nbtree to handle ScalarArrayOpExpr quals natively.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkgP3DDRJxw6DgjCxo-cu-DKrvjEv_ArkP2ctBJatDCYg@mail.gmail.com
Backpatch: 11- (all supported branches).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This code was sloppy about comparison of index columns that
are expressions. It didn't reliably reject cases where one
index has an expression where the other has a plain column,
and it could index off the start of the attmap array, leading
to a Valgrind complaint (though an actual crash seems unlikely).
I'm not sure that the expression-vs-column sloppiness leads
to any visible problem in practice, because the subsequent
comparison of the two expression lists would reject cases
where the indexes have different numbers of expressions
overall. Maybe we could falsely match indexes having the
same expressions in different column positions, but it'd
require unlucky contents of the word before the attmap array.
It's not too surprising that no problem has been reported
from the field. Nonetheless, this code is clearly wrong.
Per bug #18135 from Alexander Lakhin. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/18135-532f4a755e71e4d2@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
| |
Previously, one of the values in the struct was returned as the return
value, and another was returned via an output parameter. In
preparation for returning more stuff, consolidate both values into a
struct returned via an output parameter.
Melanie Plageman, reviewed by Andres Freund and by me.
Discussion: https://postgr.es/m/CAAKRu_br124qsGJieuYA0nGjywEukhK1dKBfRdby_4yY3E9SXA%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Tid Range scans were added back in bb437f995. That commit forgot to add
handling for TidRangePaths in print_path().
Only people building with OPTIMIZER_DEBUG might have noticed this, which
likely is the reason it's taken 4 years for anyone to notice.
Author: Andrey Lepikhov
Reported-by: Andrey Lepikhov
Discussion: https://postgr.es/m/379082d6-1b6a-4cd6-9ecf-7157d8c08635@postgrespro.ru
Backpatch-through: 14, where bb437f995 was introduced
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit removes unnecessary ExecExprFreeContext() calls in
ExecEnd* routines because the actual cleanup is managed by
FreeExecutorState(). With no callers remaining for
ExecExprFreeContext(), this commit also removes the function.
This commit also drops redundant ExecClearTuple() calls, because
ExecResetTupleTable() in ExecEndPlan() already takes care of
resetting and dropping all TupleTableSlots initialized with
ExecInitScanTupleSlot() and ExecInitExtraTupleSlot().
After these modifications, the ExecEnd*() routines for ValuesScan,
NamedTuplestoreScan, and WorkTableScan became redundant. So, this
commit removes them.
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
"in_streaming" is a flag used to track if an instance of pgoutput is
streaming changes. When pgoutput is started, the flag was always reset,
switched it back and forth in the stream start/stop callbacks.
Before this commit, it was a global variable, which is confusing as it
is actually attached to a state of PGOutputData. Per my analysis, using
a global variable did not lead to an active bug like in 54ccfd65868c,
but it makes the code more consistent. Note that we cannot backpatch
this change anyway as it requires the addition of a new field to
PGOutputData, exposed in pgoutput.h.
Author: Hou Zhijie
Reviewed-by: Amit Kapila, Michael Paquier, Peter Smith
Discussion: https://postgr.es/m/OS0PR01MB571690EF24F51F51EFFCBB0E94FAA@OS0PR01MB5716.jpnprd01.prod.outlook.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This unifies some repetitive code.
Note: I didn't push the "not found" error message into the new
function, even though all existing callers would be able to make use
of it. Using the existing error handling as-is would probably require
exposing the Relation type via tupdesc.h, which doesn't seem
desirable. (Or even if we changed it to just report the OID, it would
inject the concept of a relation containing the tuple descriptor into
tupdesc.h, which might be a layering violation. Perhaps some further
improvements could be considered here separately.)
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da%40eisentraut.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When performing inlining LLVM unfortunately "leaks" types (the
types survive and are usable, but a new round of inlining will
recreate new structurally equivalent types). This accumulation
will over time amount to a memory leak which for some queries
can be large enough to trigger the OOM process killer.
To avoid accumulation of types, all IR related data is stored
in an LLVMContextRef which is dropped and recreated in order
to release all types. Dropping and recreating incurs overhead,
so it will be done only after 100 queries. This is a heuristic
which might be revisited, but until we can get the size of the
context from LLVM we are flying a bit blind.
This issue has been reported several times, there may be more
references to it in the archives on top of the threads linked
below.
Backpatching of this fix will be handled once it has matured
in master for a bit.
Reported-By: Justin Pryzby <pryzby@telsasoft.com>
Reported-By: Kurt Roeckx <kurt@roeckx.be>
Reported-By: Jaime Casanova <jcasanov@systemguards.com.ec>
Reported-By: Lauri Laanmets <pcspets@gmail.com>
Author: Andres Freund and Daniel Gustafsson
Discussion: https://postgr.es/m/7acc8678-df5f-4923-9cf6-e843131ae89d@www.fastmail.com
Discussion: https://postgr.es/m/20201218235607.GC30237@telsasoft.com
Discussion: https://postgr.es/m/CAPH-tTxLf44s3CvUUtQpkDr1D8Hxqc2NGDzGXS1ODsfiJ6WSqA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
| |
Commit b059d2f45685a introduced llvm_types_module and accidentally
exported it. As there is no usecase for accessing this variable
externally, this makes it static.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20221101055132.pjjsvlkeo4stbjkq@awork3.anarazel.de
|
| |
|
|
|
|
|
|
|
| |
These types were added in fb46ac26fe but hasn't been used, so
remove until there is a need for them.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20221101055132.pjjsvlkeo4stbjkq@awork3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
pg_logical_slot_get_changes() calls.
The pgoutput module uses a global variable (publish_no_origin) to cache
the action for the origin filter, but we didn't reset the flag when
shutting down the output plugin, so subsequent retries may access the
previous publish_no_origin value.
We fix this by storing the flag in the output plugin's private data.
Additionally, the patch removes the currently unused origin string from the
structure.
For the back branch, to avoid changing the exposed structure, we eliminated the
global variable and instead directly used the origin string for change
filtering.
Author: Hou Zhijie
Reviewed-by: Amit Kapila, Michael Paquier
Backpatch-through: 16
Discussion: http://postgr.es/m/OS0PR01MB571690EF24F51F51EFFCBB0E94FAA@OS0PR01MB5716.jpnprd01.prod.outlook.com
|
| |
|
|
|
|
|
|
| |
Reported-by: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87sf9apnr0.fsf@wibble.ilmari.org
Backpatch-through: master
|
| |
|
|
|
|
|
| |
Mainly, rename "schema" to "columns" and related changes. The
previous naming has long been confusing.
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da%40eisentraut.org
|
