| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 25936fd46 adjusted things so that the "storeslot" we use
for remapping trigger tuples would have adequate lifespan, but it
neglected to consider the lifespan of the tuple descriptor that
the slot depends on. It turns out that in at least some cases, the
tupdesc we are passing is a refcounted tupdesc, and the refcount for
the slot's reference can get assigned to a resource owner having
different lifespan than the slot does. That leads to an error like
"tupdesc reference 0x7fdef236a1b8 is not owned by resource owner
SubTransaction". Worse, because of a second oversight in the same
commit, we'd try to free the same tupdesc refcount again while
cleaning up after that error, leading to recursive errors and an
"ERRORDATA_STACK_SIZE exceeded" PANIC.
To fix the initial problem, let's just make a non-refcounted copy
of the tupdesc we're supposed to use. That seems likely to guard
against additional problems, since there's no strong reason for
this code to assume that what it's given is a refcounted tupdesc;
in which case there's an independent hazard of the tupdesc having
shorter lifespan than the slot does. (I didn't bother trying to
free said copy, since it should go away anyway when the (sub)
transaction context is cleaned up.)
The other issue can be fixed by making the code added to
AfterTriggerFreeQuery work like the rest of that function, ie be
sure that it doesn't try to free the same slot twice in the event
of recursive error cleanup.
While here, also clean up minor stylistic issues in the test case
added by 25936fd46: don't use "create or replace function", as any
name collision within the tests is likely to have ill effects
that that won't mask; and don't use function names as generic as
trigger_function1, especially if you're not going to drop them
at the end of the test stanza.
Per bug #17607 from Thomas Mc Kay. Back-patch to v12, as the
previous fix was.
Discussion: https://postgr.es/m/17607-bd8ccc81226f7f80@postgresql.org
|
| |
|
|
|
|
|
|
|
|
| |
Similar to 5f12bc94dc, the code must re-check PageIsAllVisible() after
buffer lock is re-acquired. Backpatching to the same version, 12.
Discussion: https://postgr.es/m/CAEP4nAw9jYQDKd_5Y+-s2E4YiUJq1vqiikFjYGpLShtp-K3gag@mail.gmail.com
Reported-by: Robins Tharakan
Reviewed-by: Robins Tharakan
Backpatch-through: 12
|
| |
|
|
|
|
|
| |
This comment has been wrong since its introduction in commit 0d5f05cde;
backpatch to v12 where that came in.
Discussion: https://postgr.es/m/CAPmGK14VGf-xQjGQN4o1QyAbXAaxugU5%3DqfcmTDh1iufUDnV_w%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Mop up assorted set-but-not-used warnings in the back branches.
This includes back-patching relevant fixes from commit 152c9f7b8
the rest of the way, but there are also several cases that did not
appear in HEAD. Some of those we'd fixed in a retail way but not
back-patched, and others I think just got rewritten out of existence
during nearby refactoring.
While here, also back-patch b1980f6d0 (PL/Tcl: Fix compiler warnings
with Tcl 8.6) into 9.2, so that that branch compiles warning-free
with modern Tcl.
Per project policy, this is a candidate for back-patching into
out-of-support branches: it suppresses annoying compiler warnings
but changes no behavior. Hence, back-patch all the way to 9.2.
Discussion: https://postgr.es/m/514615.1663615243@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
clang 15+ will issue a set-but-not-used warning when the only
use of a variable is in autoincrements (e.g., "foo++;").
That's perfectly sensible, but it detects a few more cases that
we'd not noticed before. Silence the warnings with our usual
methods, such as PG_USED_FOR_ASSERTS_ONLY, or in one case by
actually removing a useless variable.
One thing that we can't nicely get rid of is that with %pure-parser,
Bison emits "yynerrs" as a local variable that falls foul of this
warning. To silence those, I inserted "(void) yynerrs;" in the
top-level productions of affected grammars.
Per recently-established project policy, this is a candidate
for back-patching into out-of-support branches: it suppresses
annoying compiler warnings but changes no behavior. Hence,
back-patch to 9.5, which is as far as these patches go without
issues. (A preliminary check shows that the prior branches
need some other set-but-not-used cleanups too, so I'll leave
them for another day.)
Discussion: https://postgr.es/m/514615.1663615243@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The API contract for planstate_tree_walker() callbacks is that they
take a PlanState pointer and a context pointer. Somebody figured
they could save a couple lines of code by ignoring that, and passing
ExecShutdownNode itself as the walker even though it has but one
argument. Somewhat remarkably, we've gotten away with that so far.
However, it seems clear that the upcoming C2x standard means to
forbid such cases, and compilers that actively break such code
likely won't be far behind. So spend the extra few lines of code
to do it honestly with a separate walker function.
In HEAD, we might as well go further and remove ExecShutdownNode's
useless return value. I left that as-is in back branches though,
to forestall complaints about ABI breakage.
Back-patch, with the thought that this might become of practical
importance before our stable branches are all out of service.
It doesn't seem to be fixing any live bug on any currently known
platform, however.
Discussion: https://postgr.es/m/208054.1663534665@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit c4c340088 changed geometric operators to use float4 and float8
functions, and handle NaN's in a better way. The circle sameness test
had a typo in the code which resulted in all comparisons with the left
circle having a NaN radius considered same.
postgres=# select '<(0,0),NaN>'::circle ~= '<(0,0),1>'::circle;
?column?
----------
t
(1 row)
This fixes the sameness test to consider the radius of both the left
and right circle.
Backpatch to v12 where this was introduced.
Author: Ranier Vilela <ranier.vf@gmail.com>
Discussion: https://postgr.es/m/CAEudQAo8dK=yctg2ZzjJuzV4zgOPBxRU5+Kb+yatFiddtQk6Rw@mail.gmail.com
Backpatch-through: v12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
During ALTER TABLE ATTACH PARTITION, if the name of a parent's foreign
key constraint is already used on the partition, the code tries to
choose another one before the FK attributes list has been populated,
so the resulting constraint name was "<relname>__fkey" instead of
"<relname>_<attrs>_fkey". Repair, and add a test case.
Backpatch to 12. In 11, the code to attach a partition was not smart
enough to cope with conflicting constraint names, so the problem doesn't
exist there.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20220901184156.738ebee5@karst
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some more things I didn't think about in commits 3f7323cbb et al:
MULTIEXPR_SUBLINK subplans might have been converted to initplans
instead of regular subplans, in which case they won't show up in
the modified targetlist. Fortunately, this would only happen if
they have no input parameters, which means that the problem we
originally needed to fix can't happen with them. Therefore, there's
no need to clone their output parameters, and thus it doesn't hurt
that we'll fail to see them in the first pass over the targetlist.
Nonetheless, this complicates matters greatly, because now we have
to distinguish output Params of initplans (which shouldn't get
renumbered) from those of regular subplans (which should).
This also breaks the simplistic scheme I used of assuming that the
subplans found in the targetlist have consecutive subLinkIds.
We really can't avoid the need to know the subplans' subLinkIds in
this code. To fix that, add subLinkId as the last field of SubPlan.
We can get away with that change in back branches because SubPlan
nodes will never be stored in the catalogs, and there's no ABI
break for external code that might be looking at the existing
fields of SubPlan.
Secondly, rewriteTargetListIU might have rolled up multiple
FieldStores or SubscriptingRefs into one targetlist entry,
breaking the assumption that there's at most one Param to fix
per targetlist entry. (That assumption is OK I think in the
ruleutils.c code I stole the logic from in 18f51083c, because
that only deals with pre-rewrite query trees. But it's
definitely not OK here.) Abandon that shortcut and just do a
full tree walk on the targetlist to ensure we find all the
Params we have to change.
Per bug #17606 from Andre Lin. As before, only v10-v13 need the
patch.
Discussion: https://postgr.es/m/17606-e5c8ad18d31db96a@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Postgres 14 commit 5b861baa taught nbtree VACUUM to tolerate buggy
opclasses. VACUUM's inability to locate a to-be-deleted page's downlink
in the parent page was logged instead of throwing an error. VACUUM
could just press on with vacuuming the index, and vacuuming the table as
a whole.
There are now anecdotal reports of this error causing problems that were
much more disruptive than the underlying index corruption ever could be.
Anything that makes VACUUM unable to make forward progress against one
table/index ultimately risks making the system enter xidStopLimit mode.
There is no good reason to take any chances here, so backpatch the
hardening commit.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzm9HR6Pow=t-iQa57zT8qmX6_M4h14F-pTtb=xFDW5FBA@mail.gmail.com
Backpatch: 10-13 (all supported versions that lacked the hardening)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commits 3f7323cbb et al missed the possibility that the Params
they are looking for could be buried under implicit coercions,
as well as other stuff that processIndirection() could add to
the original targetlist entry. Copy the code in ruleutils.c
that deals with such cases. (I thought about refactoring so
that there's just one copy; but seeing that we only need this
in old back branches, it seems not worth the trouble.)
Per off-list report from Andre Lin. As before, only v10-v13
need the patch.
Discussion: https://postgr.es/m/17596-c5357f61427a81dc@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Primarily, this fixes an incorrect calculation in SlabCheck which was
looking in the wrong byte for the sentinel check. The reason that we've
never noticed this before in the form of a failing sentinel check is
because the pre-check to this always fails because all current core users
of slab contexts have a chunk size which is already MAXALIGNed, therefore
there's never any space for the sentinel byte. It is possible that an
extension needs to use a slab context and if they do with a chunk size
that's not MAXALIGNed, then they'll likely get errors about overwritten
sentinel bytes.
Additionally, this patch changes various calculations which are being done
based on the sizeof(SlabBlock). Currently, sizeof(SlabBlock) is a
multiple of 8, therefore sizeof(SlabBlock) is the same as
MAXALIGN(sizeof(SlabBlock)), however, if we were to ever have to add any
fields to that struct as part of a bug fix, then SlabAlloc could end up
returning a non-MAXALIGNed pointer. To be safe, let's ensure we always
MAXALIGN sizeof(SlabBlock) before using it in any calculations.
This patch has already been applied to master in d5ee4db0e.
Diagnosed-by: Tomas Vondra, Tom Lane
Author: Tomas Vondra, David Rowley
Discussion: https://postgr.es/m/CAA4eK1%2B1JyW5TiL%3DyV-3Uq1CrfnTyn0Xrk5uArt31Z%3D8rgPhXQ%40mail.gmail.com
Backpatch-through: 10
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
get_database_list() failed to restore the caller's memory context,
instead leaving current context set to TopMemoryContext which is
how CommitTransactionCommand() leaves it. The callers both think
they are using short-lived contexts, for the express purpose of
not having to worry about cleaning up individual allocations.
The net effect therefore is that supposedly short-lived allocations
could accumulate indefinitely in the launcher's TopMemoryContext.
Although this has been broken for a long time, it seems we didn't
have any obvious memory leak here until v15's rearrangement of the
stats logic. I (tgl) am not entirely convinced that there's no
other leak at all, though, and we're surely at risk of adding one
in future back-patched fixes. So back-patch to all supported
branches, even though this may be only a latent bug in pre-v15.
Reid Thompson
Discussion: https://postgr.es/m/972a4e12b68b0f96db514777a150ceef7dcd2e0f.camel@crunchydata.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If the input word exceeds 1000 bytes, don't pass it to the stemmer;
just return it as-is after case folding. Such an input is surely
not a word in any human language, so whatever the stemmer might
do to it would be pretty dubious in the first place. Adding this
restriction protects us against a known recursion-to-stack-overflow
problem in the Turkish stemmer, and it seems like good insurance
against any other safety or performance issues that may exist in
the Snowball stemmers. (I note, for example, that they contain no
CHECK_FOR_INTERRUPTS calls, so we really don't want them running
for a long time.) The threshold of 1000 bytes is arbitrary.
An alternative definition could have been to treat such words as
stopwords, but that seems like a bigger break from the old behavior.
Per report from Egor Chindyaskin and Alexander Lakhin.
Thanks to Olly Betts for the recommendation to fix it this way.
Discussion: https://postgr.es/m/1661334672.728714027@f473.i.mail.ru
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When a PostgreSQL instance performing archive recovery but not using
standby mode is promoted, and the last WAL segment that it attempted
to read ended in a partial record, the previous code would create
invalid WAL on the new timeline. The WAL from the previously timeline
would be copied to the new timeline up until the end of the last valid
record, but instead of beginning to write WAL at immediately
afterwards, the promoted server would write an overwrite contrecord at
the beginning of the next segment. The end of the previous segment
would be left as all-zeroes, resulting in failures if anything tried
to read WAL from that file.
The root of the issue is that ReadRecord() decides whether to set
abortedRecPtr and missingContrecPtr based on the value of StandbyMode,
but ReadRecord() switches to a new timeline based on the value of
ArchiveRecoveryRequested. We shouldn't try to write an overwrite
contrecord if we're switching to a new timeline, so change the test in
ReadRecod() to check ArchiveRecoveryRequested instead.
Code fix by Dilip Kumar. Comments by me incorporating suggested
language from Álvaro Herrera. Further review from Kyotaro Horiguchi
and Sami Imseih.
Discussion: http://postgr.es/m/CAFiTN-t7umki=PK8dT1tcPV=mOUe2vNhHML6b3T7W7qqvvajjg@mail.gmail.com
Discussion: http://postgr.es/m/FB0DEA0B-E14E-43A0-811F-C1AE93D00FF3%40amazon.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Prior to v14, if we have a MULTIEXPR SubPlan (that is, use of the syntax
UPDATE ... SET (c1, ...) = (SELECT ...)) in an UPDATE with an inherited
or partitioned target table, inheritance_planner() will clone the
targetlist and therefore also the MULTIEXPR SubPlan and the Param nodes
referencing it for each child target table. Up to now, we've allowed
all the clones to share the underlying subplan as well as the output
parameter IDs -- that is, the runtime ParamExecData slots. That
technique is borrowed from the far older code that supports initplans,
and it works okay in that case because the cloned SubPlan nodes are
essentially identical. So it doesn't matter which one of the clones
the shared ParamExecData.execPlan field might point to.
However, this fails to hold for MULTIEXPR SubPlans, because they can
have nonempty "args" lists (values to be passed into the subplan), and
those lists could get mutated to different states in the various clones.
In the submitted reproducer, as well as the test case added here, one
clone contains Vars with varno OUTER_VAR where another has INNER_VAR,
because the child tables are respectively on the outer or inner side of
the join. Sharing the execPlan pointer can result in trying to evaluate
an args list that doesn't match the local execution state, with mayhem
ensuing. The result often is to trigger consistency checks in the
executor, but I believe this could end in a crash or incorrect updates.
To fix, assign new Param IDs to each of the cloned SubPlans, so that
they don't share ParamExecData slots at runtime. It still seems fine
for the clones to share the underlying subplan, and extra ParamExecData
slots are cheap enough that this fix shouldn't cost much.
This has been busted since we invented MULTIEXPR SubPlans in 9.5.
Probably the lack of previous reports is because query plans in which
the different clones of a MULTIEXPR mutate to effectively-different
states are pretty rare. There's no issue in v14 and later, because
without inheritance_planner() there's never a reason to clone
MULTIEXPR SubPlans.
Per bug #17596 from Andre Lin. Patch v10-v13 only.
Discussion: https://postgr.es/m/17596-c5357f61427a81dc@postgresql.org
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
SplitToVariants() in the ispell code, lseg_inside_poly() in geo_ops.c,
and regex_selectivity_sub() in selectivity estimation could recurse
until stack overflow; fix by adding check_stack_depth() calls.
So could next() in the regex compiler, but that case is better fixed by
converting its tail recursion to a loop. (We probably get better code
that way too, since next() can now be inlined into its sole caller.)
There remains a reachable stack overrun in the Turkish stemmer, but
we'll need some advice from the Snowball people about how to fix that.
Per report from Egor Chindyaskin and Alexander Lakhin. These mistakes
are old, so back-patch to all supported branches.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/1661334672.728714027@f473.i.mail.ru
|
| |
|
|
|
|
|
|
|
| |
sysctl is more portable than Linux's /proc/sys file tree, and
often easier to use too. That's why most of our docs refer to
sysctl when talking about how to adjust kernel parameters.
Bring the few stragglers into line.
Discussion: https://postgr.es/m/361175.1661187463@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
While decoding changes in a loop, if we skip all the changes there is no
CFI making the loop uninterruptible.
Reported-by: Whale Song and Andrey Borodin
Bug: 17580
Author: Masahiko Sawada
Reviwed-by: Amit Kapila
Backpatch-through: 10
Discussion: https://postgr.es/m/17580-849c1d5b6d7eb422@postgresql.org
Discussion: https://postgr.es/m/B319ECD6-9A28-4CDF-A8F4-3591E0BF2369@yandex-team.ru
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When creating a partitioned index, DefineIndex tries to identify
any existing indexes on the partitions that match the partitioned
index, so that it can absorb those as child indexes instead of
building new ones. Part of the matching is to compare IndexInfo
structs --- but that wasn't done quite right. We're comparing
the IndexInfo built within DefineIndex itself to one made from
existing catalog contents by BuildIndexInfo. Notably, while
BuildIndexInfo will run index expressions and predicates through
expression preprocessing, that has not happened to DefineIndex's
struct. The result is failure to match and subsequent creation
of duplicate indexes.
The easiest and most bulletproof fix is to build a new IndexInfo
using BuildIndexInfo, thereby guaranteeing that the processing done
is identical.
While here, let's also extract the opfamily and collation data
from the new partitioned index, removing ad-hoc logic that
duplicated knowledge about how those are constructed.
Per report from Christophe Pettus. Back-patch to v11 where
we invented partitioned indexes.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/8864BFAA-81FD-4BF9-8E06-7DEB8D4164ED@thebuild.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The current publisher code checks if UPDATE or DELETE can be executed with
the replica identity of the table even if it's a partitioned table. We can
skip checking the replica identity for partitioned tables because the
operations are actually performed on the leaf partitions (not the
partitioned table).
Reported-by: Brad Nicholson
Author: Hou Zhijie
Reviewed-by: Peter Smith, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAMMnM%3D8i5DohH%3DYKzV0_wYuYSYvuOJoL9F5nzXTc%2ByzsG1f6rg%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
| |
This option switch supports a total of 8 values, as told by
set_plan_disabling_options() and the documentation, but this was not
reflected in the output generated by --help.
Author: Junwang Zhao
Discussion: https://postgr.es/m/CAEG8a3+pT3cWzyjzKs184L1XMNm8NDnoJLiSjAYSO7XqpRh_vA@mail.gmail.com
Backpatch-through: 10
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When enlarging the work buffers of a VarStringSortSupport object,
varstrfastcmp_locale was careful to keep them in the ssup_cxt
memory context; but varstr_abbrev_convert just used palloc().
The latter creates a hazard that the buffers could be freed out
from under the VarStringSortSupport object, resulting in stomping
on whatever gets allocated in that memory later.
In practice, because we only use this code for ICU collations
(cf. 3df9c374e), the problem is confined to use of ICU collations.
I believe it may have been unreachable before the introduction
of incremental sort, too, as traditional sorting usually just
uses one context for the duration of the sort.
We could fix this by making the broken stanzas in varstr_abbrev_convert
match the non-broken ones in varstrfastcmp_locale. However, it seems
like a better idea to dodge the issue altogether by replacing the
pfree-and-allocate-anew coding with repalloc, which automatically
preserves the chunk's memory context. This fix does add a few cycles
because repalloc will copy the chunk's content, which the existing
coding assumes is useless. However, we don't expect that these buffer
enlargement operations are performance-critical. Besides that, it's
far from obvious that copying the buffer contents isn't required, since
these stanzas make no effort to mark the buffers invalid by resetting
last_returned, cache_blob, etc. That seems to be safe upon examination,
but it's fragile and could easily get broken in future, which wouldn't
get revealed in testing with short-to-moderate-size strings.
Per bug #17584 from James Inform. Whether or not the issue is
reachable in the older branches, this code has been broken on its
own terms from its introduction, so patch all the way back.
Discussion: https://postgr.es/m/17584-95c79b4a7d771f44@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's possible to reach this case when work_mem is very small and tupsize
is (relatively) very large. In that case ExecChooseHashTableSize would
get an assertion failure, or with asserts off it'd compute nbuckets = 0,
which'd likely cause misbehavior later (I've not checked). To fix,
clamp the number of buckets to be at least 1.
This is due to faulty conversion of old my_log2() coding in 28d936031.
Back-patch to v13, as that was.
Zhang Mingli
Discussion: https://postgr.es/m/beb64ca0-91e2-44ac-bf4a-7ea36275ec02@Spark
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Most parts of the parser can expect that the stack overflow check
in transformExprRecurse() will trigger before things get desperate.
However, transformFromClauseItem() can recurse directly to self
without having analyzed any expressions, so it's possible to drive
it to a stack-overrun crash. Add a check to prevent that.
Per bug #17583 from Egor Chindyaskin. Back-patch to all supported
branches.
Richard Guo
Discussion: https://postgr.es/m/17583-33be55b9f981f75c@postgresql.org
|
| |
|
|
|
|
|
|
| |
As of 897795240cfaaed724af2f53ed2c50c9862f951f, check constraints can
be declared invalid. But that patch didn't update _outConstraint() to
also show the relevant struct fields (which were only applicable to
foreign keys before that). This currently only affects debugging
output, so no impact in practice.
|
| |
|
|
|
|
|
|
|
| |
The set of fields printed by _outConstraint() in the CONSTR_IDENTITY
case didn't match the set of fields actually used in that case. (The
code was probably uncarefully copied from the CONSTR_DEFAULT case.)
Fix that by using the right set of fields. Since there is no read
support for this node type, this is really just for debugging output
right now, so it doesn't affect anything important.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, we relied on HEAP2_NEW_CID records and XACT_INVALIDATION
records to know if the transaction has modified the catalog, and that
information is not serialized to snapshot. Therefore, after the restart,
if the logical decoding decodes only the commit record of the transaction
that has actually modified a catalog, we will miss adding its XID to the
snapshot. Thus, we will end up looking at catalogs with the wrong
snapshot.
To fix this problem, this changes the snapshot builder so that it
remembers the last-running-xacts list of the decoded RUNNING_XACTS record
after restoring the previously serialized snapshot. Then, we mark the
transaction as containing catalog changes if it's in the list of initial
running transactions and its commit record has XACT_XINFO_HAS_INVALS. To
avoid ABI breakage, we store the array of the initial running transactions
in the static variables InitialRunningXacts and NInitialRunningXacts,
instead of storing those in SnapBuild or ReorderBuffer.
This approach has a false positive; we could end up adding the transaction
that didn't change catalog to the snapshot since we cannot distinguish
whether the transaction has catalog changes only by checking the COMMIT
record. It doesn't have the information on which (sub) transaction has
catalog changes, and XACT_XINFO_HAS_INVALS doesn't necessarily indicate
that the transaction has catalog change. But that won't be a problem since
we use snapshot built during decoding only to read system catalogs.
On the master branch, we took a more future-proof approach by writing
catalog modifying transactions to the serialized snapshot which avoids the
above false positive. But we cannot backpatch it because of a change in
the SnapBuild.
Reported-by: Mike Oh
Author: Masahiko Sawada
Reviewed-by: Amit Kapila, Shi yu, Takamichi Osumi, Kyotaro Horiguchi, Bertrand Drouvot, Ahsan Hadi
Backpatch-through: 10
Discussion: https://postgr.es/m/81D0D8B0-E7C4-4999-B616-1E5004DBDCD2%40amazon.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
fmgr_sql must make expanded-datum arguments read-only, because
it's possible that the function body will pass the argument to
more than one callee function. If one of those functions takes
the datum's R/W property as license to scribble on it, then later
callees will see an unexpected value, leading to wrong answers.
From a performance standpoint, it'd be nice to skip this in the
common case that the argument value is passed to only one callee.
However, detecting that seems fairly hard, and certainly not
something that I care to attempt in a back-patched bug fix.
Per report from Adam Mackler. This has been broken since we
invented expanded datums, so back-patch to all supported branches.
Discussion: https://postgr.es/m/WScDU5qfoZ7PB2gXwNqwGGgDPmWzz08VdydcPFLhOwUKZcdWbblbo-0Lku-qhuEiZoXJ82jpiQU4hOjOcrevYEDeoAvz6nR0IU4IHhXnaCA=@mackler.email
Discussion: https://postgr.es/m/187436.1660143060@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, if an extension script did CREATE OR REPLACE and there was
an existing object not belonging to the extension, it would overwrite
the object and adopt it into the extension. This is problematic, first
because the overwrite is probably unintentional, and second because we
didn't change the object's ownership. Thus a hostile user could create
an object in advance of an expected CREATE EXTENSION command, and would
then have ownership rights on an extension object, which could be
modified for trojan-horse-type attacks.
Hence, forbid CREATE OR REPLACE of an existing object unless it already
belongs to the extension. (Note that we've always forbidden replacing
an object that belongs to some other extension; only the behavior for
previously-free-standing objects changes here.)
For the same reason, also fail CREATE IF NOT EXISTS when there is
an existing object that doesn't belong to the extension.
Our thanks to Sven Klemm for reporting this problem.
Security: CVE-2022-2625
|
| |
|
|
|
| |
Source-Git-URL: ssh://git@git.postgresql.org/pgtranslation/messages.git
Source-Git-Hash: 8ee19d25e0753a690bea62ddcbbfaf2e0d093c1d
|
| |
|
|
|
|
|
|
| |
On closer inspection, mcv.c isn't as broken for ScalarArrayOpExpr
as I thought. The Var-on-right issue is real enough, but actually
it does cope fine with a NULL array constant --- I was misled by
an XXX comment suggesting it didn't. Undo that part of the code
change, and replace the XXX comment with something less misleading.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
statext_is_compatible_clause_internal() checked that the arguments
of a ScalarArrayOpExpr are one Var and one Const, but it would allow
cases where the Const was on the left. Subsequent uses of the clause
are not expecting that and would suffer assertion failures or core
dumps. mcv.c also had not bothered to cope with the case of a NULL
array constant, which seems really unacceptably sloppy of somebody.
(Although our tools failed us there too, since AFAIK neither Coverity
nor any compiler warned of the obvious use-of-uninitialized-variable
condition.) It seems best to handle that by having
statext_is_compatible_clause_internal() reject it.
Noted while fixing bug #17570. Back-patch to v13 where the
extended stats code grew some awareness of ScalarArrayOpExpr.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
That bit is unlogged and therefore it's wrong to consider it in WAL page
comparison.
Add a test that tickles the case, as branch testing technology allows.
This has been a problem ever since wal consistency checking was
introduced (commit a507b86900f6 for pg10), so backpatch to all supported
branches.
Author: 王海洋 (Haiyang Wang) <wanghaiyang.001@bytedance.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CACciXAD2UvLMOhc4jX9VvOKt7DtYLr3OYRBhvOZ-jRxtzc_7Jg@mail.gmail.com
Discussion: https://postgr.es/m/CACciXADOfErX9Bx0nzE_SkdfXr6Bbpo5R=v_B6MUTEYW4ya+cg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
| |
The five commits ending at cc2c7d65fc27e877c9f407587b0b92d46cd6dd16
closed this race condition for v15+. For v14 through v10, add a HINT to
discourage studying the cosmetic problem.
Reviewed by Kyotaro Horiguchi and David Steele.
Discussion: https://postgr.es/m/20220731061747.GA3692882@rfd.leadboat.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Using ATSimpleRecursion() in ATPrepCmd() to do so as bbb927b4db9b did is
not correct, because ATPrepCmd() can't distinguish between triggers that
may be cloned and those that may not, so would wrongly try to recurse
for the latter category of triggers.
So this commit restores the code in EnableDisableTrigger() that
86f575948c77 had added to do the recursion, which would do it only for
triggers that may be cloned, that is, row-level triggers. This also
changes tablecmds.c such that ATExecCmd() is able to pass the value of
ONLY flag down to EnableDisableTrigger() using its new 'recurse'
parameter.
This also fixes what seems like an oversight of 86f575948c77 that the
recursion to partition triggers would only occur if EnableDisableTrigger()
had actually changed the trigger. It is more apt to recurse to inspect
partition triggers even if the parent's trigger didn't need to be
changed: only then can we be certain that all descendants share the same
state afterwards.
Backpatch all the way back to 11, like bbb927b4db9b. Care is taken not
to break ABI compatibility (and that no catversion bump is needed.)
Co-authored-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Dmitry Koval <d.koval@postgrespro.ru>
Discussion: https://postgr.es/m/CA+HiwqG-cZT3XzGAnEgZQLoQbyfJApVwOTQaCaas1mhpf+4V5A@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Ordinarily the functions called in this loop ought to have plenty
of CFIs themselves; but we've now seen a case where no such CFI is
reached, making the loop uninterruptible. Even though that's from
a recently-introduced bug, it seems prudent to install a CFI at
the loop level in all branches.
Per discussion of bug #17558 from Andrew Kesper (an actual fix for
that bug will follow).
Discussion: https://postgr.es/m/17558-3f6599ffcf52fd4a@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit fac1b470a thought we could check for set-returning functions
by testing only the top-level node in an expression tree. This is
wrong in itself, and to make matters worse it encouraged others
to make the same mistake, by exporting tlist.c's special-purpose
IS_SRF_CALL() as a widely-visible macro. I can't find any evidence
that anyone's taken the bait, but it was only a matter of time.
Use expression_returns_set() instead, and stuff the IS_SRF_CALL()
genie back in its bottle, this time with a warning label. I also
added a couple of cross-reference comments.
After a fair amount of fooling around, I've despaired of making
a robust test case that exposes the bug reliably, so no test case
here. (Note that the test case added by fac1b470a is itself
broken, in that it doesn't notice if you remove the code change.
The repro given by the bug submitter currently doesn't fail either
in v15 or HEAD, though I suspect that may indicate an unrelated bug.)
Per bug #17564 from Martijn van Oosterhout. Back-patch to v13,
as the faulty patch was.
Discussion: https://postgr.es/m/17564-c7472c2f90ef2da3@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
I thought commit fd96d14d9 had plugged all the holes of this sort,
but no, function RTEs could produce oversize tuples too, either
via long coldeflists or just from multiple functions in one RTE.
(I'm pretty sure the other variants of base RTEs aren't a problem,
because they ultimately refer to either a table or a sub-SELECT,
whose widths are enforced elsewhere. But we explicitly allow join
RTEs to be overwidth, as long as you don't try to form their
tuple result.)
Per further discussion of bug #17561. As before, patch all branches.
Discussion: https://postgr.es/m/17561-80350151b9ad2ad4@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A RowExpr with more than MaxTupleAttributeNumber columns would fail at
execution anyway, since we cannot form a tuple datum with more than that
many columns. While heap_form_tuple() has a check for too many columns,
it emerges that there are some intermediate bits of code that don't
check and can be driven to failure with sufficiently many columns.
Checking this at parse time seems like the most appropriate place to
install a defense, since we already check SELECT list length there.
While at it, make the SELECT-list-length error use the same errcode
(TOO_MANY_COLUMNS) as heap_form_tuple does, rather than the generic
PROGRAM_LIMIT_EXCEEDED.
Per bug #17561 from Egor Chindyaskin. The given test case crashes
in all supported branches (and probably a lot further back),
so patch all.
Discussion: https://postgr.es/m/17561-80350151b9ad2ad4@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Crash recovery on standby may encounter missing directories
when replaying database-creation WAL records. Prior to this
patch, the standby would fail to recover in such a case;
however, the directories could be legitimately missing.
Consider the following sequence of commands:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the
tablespace directory, the standby crashes and has to replay the
create database record again, crash recovery must be able to continue.
A fix for this problem was already attempted in 49d9cfc68bf4, but it
was reverted because of design issues. This new version is based
on Robert Haas' proposal: any missing tablespaces are created
during recovery before reaching consistency. Tablespaces
are created as real directories, and should be deleted
by later replay. CheckRecoveryConsistency ensures
they have disappeared.
The problems detected by this new code are reported as PANIC,
except when allow_in_place_tablespaces is set to ON, in which
case they are WARNING. Apart from making tests possible, this
gives users an escape hatch in case things don't go as planned.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Author: Paul Guo <paulguo@gmail.com>
Reviewed-by: Anastasia Lubennikova <lubennikovaav@gmail.com> (older versions)
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com> (older versions)
Reviewed-by: Michaël Paquier <michael@paquier.xyz>
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a backpatch to branches 10-14 of the following commits:
7170f2159fb2 Allow "in place" tablespaces.
c6f2f01611d4 Fix pg_basebackup with in-place tablespaces.
f6f0db4d6240 Fix pg_tablespace_location() with in-place tablespaces
7a7cd84893e0 doc: Remove mention to in-place tablespaces for pg_tablespace_location()
5344723755bd Remove unnecessary Windows-specific basebackup code.
In-place tablespaces were introduced as a testing helper mechanism, but
they are going to be used for a bugfix in WAL replay to be backpatched
to all stable branches.
I (Álvaro) had to adjust some code to account for lack of
get_dirent_type() in branches prior to 14.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Michaël Paquier <michael@paquier.xyz>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20220722081858.omhn2in5zt3g4nek@alvherre.pgsql
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We have a few commands that "can't run in a transaction block",
meaning that if they complete their processing but then we fail
to COMMIT, we'll be left with inconsistent on-disk state.
However, the existing defenses for this are only watertight for
simple query protocol. In extended protocol, we didn't commit
until receiving a Sync message. Since the client is allowed to
issue another command instead of Sync, we're in trouble if that
command fails or is an explicit ROLLBACK. In any case, sitting
in an inconsistent state while waiting for a client message
that might not come seems pretty risky.
This case wasn't reachable via libpq before we introduced pipeline
mode, but it's always been an intended aspect of extended query
protocol, and likely there are other clients that could reach it
before.
To fix, set a flag in PreventInTransactionBlock that tells
exec_execute_message to force an immediate commit. This seems
to be the approach that does least damage to existing working
cases while still preventing the undesirable outcomes.
While here, add some documentation to protocol.sgml that explicitly
says how to use pipelining. That's latent in the existing docs if
you know what to look for, but it's better to spell it out; and it
provides a place to document this new behavior.
Per bug #17434 from Yugo Nagata. It's been wrong for ages,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17434-d9f7a064ce2a88a3@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Due to lack of concern for the case in the dependency code, it's
possible to drop a column of a composite type even though stored
queries have references to the dropped column via functions-in-FROM
that return the composite type. There are "soft" references,
namely FROM-clause aliases for such columns, and "hard" references,
that is actual Vars referring to them. The right fix for hard
references is to add dependencies preventing the drop; something
we've known for many years and not done (and this commit still doesn't
address it). A "soft" reference shouldn't prevent a drop though.
We've been around on this before (cf. 9b35ddce9, 2c4debbd0), but
nobody had noticed that the current behavior can result in dump/reload
failures, because ruleutils.c can print more column aliases than the
underlying composite type now has. So we need to rejigger the
column-alias-handling code to treat such columns as dropped and not
print aliases for them.
Rather than writing new code for this, I used expandRTE() which already
knows how to figure out which function result columns are dropped.
I'd initially thought maybe we could use expandRTE() in all cases, but
that fails for EXPLAIN's purposes, because the planner strips a lot of
RTE infrastructure that expandRTE() needs. So this patch just uses it
for unplanned function RTEs and otherwise does things the old way.
If there is a hard reference (Var), then removing the column alias
causes us to fail to print the Var, since there's no longer a name
to print. Failing seems less desirable than printing a made-up
name, so I made it print "?dropped?column?" instead.
Per report from Timo Stolz. Back-patch to all supported branches.
Discussion: https://postgr.es/m/5c91267e-3b6d-5795-189c-d15a55d61dbb@nullachtvierzehn.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When a non-exclusive backup is canceled, do_pg_abort_backup() is called
and resets some variables set by pg_backup_start (pg_start_backup in v14
or before). But previously it forgot to reset the session state indicating
whether a non-exclusive backup is in progress or not in this session.
This issue could cause an assertion failure when the session running
BASE_BACKUP is terminated after it executed pg_backup_start and
pg_backup_stop (pg_stop_backup in v14 or before). Also it could cause
a segmentation fault when pg_backup_stop is called after BASE_BACKUP
in the same session is canceled.
This commit fixes the issue by making do_pg_abort_backup reset
that session state.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Masahiko Sawada, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/3374718f-9fbf-a950-6d66-d973e027f44c@oss.nttdata.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Multiple non-exclusive backups are able to be run conrrently in different
sessions. But, in the same session, only one non-exclusive backup can be
run at the same moment. If pg_backup_start (pg_start_backup in v14 or before)
is called in the middle of another non-exclusive backup in the same session,
an error is thrown.
However, previously, in logical replication walsender mode, even if that
walsender session had already called pg_backup_start and started
a non-exclusive backup, it could execute BASE_BACKUP command and
start another non-exclusive backup. Which caused subsequent pg_backup_stop
to throw an error because BASE_BACKUP unexpectedly reset the session state
marked by pg_backup_start.
This commit prevents BASE_BACKUP command in the middle of another
non-exclusive backup in the same session.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Masahiko Sawada, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/3374718f-9fbf-a950-6d66-d973e027f44c@oss.nttdata.com
|
| |
|
|
|
|
|
|
| |
This fixes an ABI break introduced by
cfc86f987349372dbbfc0391f9f519c0a7b27b84.
Author: Markus Wanner <markus.wanner@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/defd749a-8410-841d-1126-21398686d63d@enterprisedb.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The patch that added regcollation doesn't seem to have been too
thorough about supporting it everywhere that other reg* types
are supported. Fix that. (The find_expr_references omission
is moderately serious, since it could result in missing expression
dependencies. The others are less exciting.)
Noted while fixing bug #17483. Back-patch to v13 where
regcollation was added.
Discussion: https://postgr.es/m/1423433.1652722406@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 4518c798 blocks signals for a short region of code, but it
assumed that whatever called it had the signal mask set to UnBlockSig on
entry. That may be true today (or may even not be, in extensions in the
wild), but it would be better not to make that assumption. We should
save-and-restore the caller's signal mask.
The PG_SETMASK() portability macro couldn't be used for that, which is
why it wasn't done before. But... considering that commit a65e0864
established back in 9.6 that supported POSIX systems have sigprocmask(),
and that this is POSIX-only code, there is no reason not to use standard
sigprocmask() directly to achieve that.
Back-patch to all supported releases, like 4518c798 and 80845b7c.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGKx6Biq7_UuV0kn9DW%2B8QWcpJC1qwhizdtD9tN-fn0H0g%40mail.gmail.com
|
