| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
| |
If a database name contained a '=' character, pg_dumpall failed. The problem
was in the way pg_dumpall passes the database name to pg_dump on the
command line. If it contained a '=' character, pg_dump would interpret it
as a libpq connection string instead of a plain database name.
To fix, pass the database name to pg_dump as a connection string,
"dbname=foo", with the database name escaped if necessary.
Back-patch to all supported branches.
|
| |
|
|
| |
Back-patch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since a backend adds itself to the global listener array during
Exec_ListenPreCommit, it's inappropriate for it to remove itself during
Exec_UnlistenCommit or Exec_UnlistenAllCommit --- that leads to failure
when committing a transaction that did UNLISTEN then LISTEN, since we end
up not registered though we should be. (This leads to missing later
notifications, or to Assert failures in assert-enabled builds.) Instead
deal with deregistering at the bottom of AtCommit_Notify, when we know the
final state of the listenChannels list.
Also, simplify the representation of registration status by replacing the
transient backendHasExecutedInitialListen flag with an amRegisteredListener
flag.
Per report from Greg Sabino Mullane. Back-patch to 9.0, where the problem
was introduced during the LISTEN/NOTIFY rewrite.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After further reflection I was unconvinced that the existing coding is
guaranteed to return valid union datums in every code path for multi-column
indexes. Fix that by forcing a gistunionsubkey() call at the end of the
recursion. Having done that, we can remove some clearly-redundant calls
elsewhere. This should be a little faster for multi-column indexes (since
the previous coding would uselessly do such a call for each column while
unwinding the recursion), as well as much harder to break.
Also, simplify the handling of cases where one side or the other of a
primary split contains only don't-care tuples. The previous coding used a
very ugly hack in removeDontCares() that essentially forced one random
tuple to be treated as non-don't-care, providing a random initial choice of
seed datum for the secondary split. It seems unlikely that that method
will give better-than-random splits. Instead, treat such a split as
degenerate and just let the next column determine the split, the same way
that we handle fully degenerate cases where the two sides produce identical
union datums.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This LOG message was put in over five years ago with the evident
expectation that we'd make all GiST opclasses support secondary split
directly. However, no such thing ever happened, and indeed the number of
opclasses supporting it decreased to zero in 9.2. The reason is that
improving on the default implementation isn't that easy --- the
opclass-specific code that did exist, before 9.2, doesn't appear to have
been any improvement over the default.
Hence, remove the message altogether. There's certainly no point in
nagging users about this in released branches, but I doubt that we'll
ever implement complete opclass-specific support anyway.
|
| |
|
|
|
|
|
|
|
|
| |
Improve comments, rename some variables and functions, slightly simplify
a couple of APIs, in an attempt to make this code readable by people other
than its original author.
Even though this is essentially just cosmetic, back-patch to all active
branches, because otherwise it's going to make back-patching future fixes
in this file very painful.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While there's considerable doubt that we want fuzzy behavior in the
geometric operators at all (let alone as currently implemented), nobody is
stepping forward to redesign that stuff. In the meantime it behooves us
to make sure that index searches agree with the behavior of the underlying
operators. This patch fixes two problems in this area.
First, gist_box_same was using fuzzy equality, but it really needs to use
exact equality to prevent not-quite-identical upper index keys from being
treated as identical, which for example would prevent an existing upper
key from being extended by an amount less than epsilon. This would result
in inconsistent indexes. (The next release notes will need to recommend
that users reindex GiST indexes on boxes, polygons, circles, and points,
since all four opclasses use gist_box_same.)
Second, gist_point_consistent used exact comparisons for upper-page
comparisons in ~= searches, when it needs to use fuzzy comparisons to
ensure it finds all matches; and it used fuzzy comparisons for point <@ box
searches, when it needs to use exact comparisons because that's what the
<@ operator (rather inconsistently) does.
The added regression test cases illustrate all three misbehaviors.
Back-patch to all active branches. (8.4 did not have GiST point_ops,
but it still seems prudent to apply the gist_box_same patch to it.)
Alexander Korotkov, reviewed by Noah Misch
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When considering a non-last column in a multi-column GiST index,
gistsplit.c tries to improve on the split chosen by the opclass-specific
pickSplit function by considering penalties for the next column. However,
there were two bugs in this code: it failed to recompute the union keys for
the leftmost index columns, even though these might well change after
reassigning tuples; and it included the old union keys in the recomputation
for the columns it did recompute, so that those keys couldn't get smaller
even if they should. The first problem could result in an invalid index
in which searches wouldn't find index entries that are in fact present;
the second would make the index less efficient to search.
Both of these errors were caused by misuse of gistMakeUnionItVec, whose
API was designed in a way that just begged such errors to be made. There
is no situation in which it's safe or useful to compute the union keys for
a subset of the index columns, and there is no caller that wants any
previous union keys to be included in the computation; so the undocumented
choice to treat the union keys as in/out rather than pure output parameters
is a waste of code as well as being dangerous.
Hence, rather than just making a minimal patch, I've changed the API of
gistMakeUnionItVec to remove the "startkey" parameter (it now always
processes all index columns) and treat the attr/isnull arrays as purely
output parameters.
In passing, also get rid of a couple of unnecessary and dangerous uses
of static variables in gistutil.c. It's remarkable that the one in
gistMakeUnionKey hasn't given us portability troubles before now, because
in addition to posing a re-entrancy hazard, it was unsafely assuming that
a static char[] array would have at least Datum alignment.
Per investigation of a trouble report from Tomas Vondra. (There are also
some bugs in contrib/btree_gist to be fixed, but that seems like material
for a separate patch.) Back-patch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Normally, we suppress sending a tabstats message to the collector unless
there were some actual table stats to send. However, during backend exit
we should force out the message if there are any transaction commit/abort
counts to send, else the session's last few commit/abort counts will never
get reported at all. We had logic for this, but the short-circuit test
at the top of pgstat_report_stat() ignored the "force" flag, with the
consequence that session-ending transactions that touched no database-local
tables would not get counted. Seems to be an oversight in my commit
641912b4d17fd214a5e5bae4e7bb9ddbc28b144b, which added the "force" flag.
That was back in 8.3, so back-patch to all supported versions.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This function was misdeclared to take cstring when it should take internal.
This at least allows crashing the server, and in principle an attacker
might be able to use the function to examine the contents of server memory.
The correct fix is to adjust the system catalog contents (and fix the
regression tests that should have caught this but failed to). However,
asking users to correct the catalog contents in existing installations
is a pain, so as a band-aid fix for the back branches, install a check
in enum_recv() to make it throw error if called with a cstring argument.
We will later revert this in HEAD in favor of correcting the catalogs.
Our thanks to Sumit Soni (via Secunia SVCRP) for reporting this issue.
Security: CVE-2013-0255
|
| |
|
|
| |
Revert commit 84725aa5efe11688633b553e58113efce4181f2e
|
| | |
|
| |
|
|
| |
Following bug analysis of #7819 by Tom Lane
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The original code used freeze_min_age instead of freeze_table_age. The
main consequence of this mistake is that lowering freeze_min_age would
cause full-table scans to occur much more frequently, which causes
serious issues because the number of writes required is much larger.
That feature (freeze_min_age) is supposed to affect only how soon tuples
are frozen; some pages should still be skipped due to the visibility
map.
Backpatch to 8.4, where the freeze_table_age feature was introduced.
Report and patch from Andres Freund
|
| |
|
|
|
|
|
|
|
| |
This ensure the version number increases over time. The first three digits
in the version number is still set to the actual PostgreSQL version
number, but the last one is intended to be an ever increasing build number,
which previosly failed when it changed between 1, 2 and 3 digits long values.
Noted by Deepak
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Such cases should work, but the grammar failed to accept them because of
our ancient precedence hacks to convince bison that extra parentheses
around a sub-SELECT in an expression are unambiguous. (Formally, they
*are* ambiguous, but we don't especially care whether they're treated as
part of the sub-SELECT or part of the expression. Bison cares, though.)
Fix by adding a redundant-looking production for this case.
This is a fine example of why fixing shift/reduce conflicts via
precedence declarations is more dangerous than it looks: you can easily
cause the parser to reject cases that should work.
This has been wrong since commit 3db4056e22b0c6b2adc92543baf8408d2894fe91
or maybe before, and apparently some people have been working around it
by inserting no-op casts. That method introduces a dump/reload hazard,
as illustrated in bug #7838 from Jan Mate. Hence, back-patch to all
active branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
My "fix" for bugs #7578 and #6116 on DROP OWNED at fe3b5eb08a1 not only
misstated that it applied to REASSIGN OWNED (which it did not affect),
but it also failed to fix the problems fully, because I didn't test the
case of owned shared objects. Thus I created a new bug, reported by
Thomas Kellerer as #7748, which would cause DROP OWNED to fail with a
not-for-user-consumption error message. The code would attempt to drop
the database, which not only fails to work because the underlying code
does not support that, but is a pretty dangerous and undesirable thing
to be doing as well.
This patch fixes that bug by having DROP OWNED only attempt to process
shared objects when grants on them are found, ignoring ownership.
Backpatch to 8.3, which is as far as the previous bug was backpatched.
|
| |
|
|
| |
Bug reported and fixed by Chen Huajun <chenhj@cn.fujitsu.com>.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
plpython tried to use a single cache entry for a trigger function, but it
needs a separate cache entry for each table the trigger is applied to,
because there is table-dependent data in there. This was done correctly
before 9.1, but commit 46211da1b84bc3537e799ee1126098e71c2428e8 broke it
by simplifying the lookup key from "function OID and triggered table OID"
to "function OID and is-trigger boolean". Go back to using both OIDs
as the lookup key. Per bug report from Sandro Santilli.
Andres Freund
|
| |
|
|
|
|
| |
Hopefully, this will unbreak the buildfarm.
Andres Freund
|
| |
|
|
| |
Noted by Joe Van Dyk
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since 9.0, the count parameter has only limited the number of tuples
actually returned by the executor. It doesn't affect the behavior of
INSERT/UPDATE/DELETE unless RETURNING is specified, because without
RETURNING, the ModifyTable plan node doesn't return control to execMain.c
for each tuple. And we only check the limit at the top level.
While this behavioral change was unintentional at the time, discussion of
bug #6572 led us to the conclusion that we prefer the new behavior anyway,
and so we should just adjust the docs to match rather than change the code.
Accordingly, do that. Back-patch as far as 9.0 so that the docs match the
code in each branch.
|
| |
|
|
|
|
|
|
|
|
| |
This ensures that mapping of non-ascii prompts
to the correct code page occurs.
Bug report and original patch from Alexander Law,
reviewed and reworked by Noah Misch.
Backpatch to all live branches.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The machinery around XLOG_HEAP2_CLEANUP_INFO failed
to correctly pass through the necessary information
on latestRemovedXid, avoiding cancellations in some
infrequent concurrent update/cleanup scenarios.
Backpatchable fix to 9.0
Detailed bug report and fix by Noah Misch,
backpatchable version by me.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In situations where there are over 8MB of empty pages at the end of
a table, the truncation work for trailing empty pages takes longer
than deadlock_timeout, and there is frequent access to the table by
processes other than autovacuum, there was a problem with the
autovacuum worker process being canceled by the deadlock checking
code. The truncation work done by autovacuum up that point was
lost, and the attempt tried again by a later autovacuum worker. The
attempts could continue indefinitely without making progress,
consuming resources and blocking other processes for up to
deadlock_timeout each time.
This patch has the autovacuum worker checking whether it is
blocking any other thread at 20ms intervals. If such a condition
develops, the autovacuum worker will persist the work it has done
so far, release its lock on the table, and sleep in 50ms intervals
for up to 5 seconds, hoping to be able to re-acquire the lock and
try again. If it is unable to get the lock in that time, it moves
on and a worker will try to continue later from the point this one
left off.
While this patch doesn't change the rules about when and what to
truncate, it does cause the truncation to occur sooner, with less
blocking, and with the consumption of fewer resources when there is
contention for the table's lock.
The only user-visible change other than improved performance is
that the table size during truncation may change incrementally
instead of just once.
Backpatched to 9.0 from initial master commit at
b19e4250b45e91c9cbdd18d35ea6391ab5961c8d -- before that the
differences are too large to be clearly safe.
Jan Wieck
|
| |
|
|
|
|
|
|
|
|
| |
This bug goes back to the original Postgres95 sources. Its significance
to modern PG versions is marginal, since we have not used PQprintTuples()
internally in a very long time, and it doesn't seem to have ever been
documented either. Still, it *is* exposed to client apps, so somebody
out there might possibly be using it.
Xi Wang
|
| |
|
|
|
|
| |
The code failed to detect an out-of-memory failure.
Xi Wang
|
| |
|
|
|
|
|
|
|
|
| |
Un-double the backslashes in the LIKE patterns, since
standard_conforming_strings is now the default. Just to be sure, include
a command to set standard_conforming_strings to ON in the example.
Back-patch to 9.1, where standard_conforming_strings became the default.
Josh Kupershmidt, reviewed by Jeff Janes
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Complaint and patch from Zoltán Böszörményi.
When cross-compiling, the native make doesn't know
about the Windows .exe suffix, so it only builds with
it when explicitly told to do so.
The native make will not see the link between the target
name and the built executable, and might this do unnecesary
work, but that's a bigger problem than this one, if in fact
we consider it a problem at all.
Back-patch to all live branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use of SnapshotNow is known to expose us to race conditions if the tuple(s)
being sought could be updated by concurrently-committing transactions.
CREATE DATABASE and DROP DATABASE are particularly exposed because they do
heavyweight filesystem operations during their scans of pg_tablespace,
so that the scans run for a very long time compared to most. Furthermore,
the potential consequences of a missed or twice-visited row are nastier
than average:
* createdb() could fail with a bogus "file already exists" error, or
silently fail to copy one or more tablespace's worth of files into the
new database.
* remove_dbtablespaces() could miss one or more tablespaces, thus failing
to free filesystem space for the dropped database.
* check_db_file_conflict() could likewise miss a tablespace, leading to an
OID conflict that could result in data loss either immediately or in
future operations. (This seems of very low probability, though, since a
duplicate database OID would be unlikely to start with.)
Hence, it seems worth fixing these three places to use MVCC snapshots, even
though this will someday be superseded by a generic solution to SnapshotNow
race conditions.
Back-patch to all active branches.
Stephen Frost and Tom Lane
|
| |
|
|
|
|
|
|
|
| |
"none" could mislead to think that you're connected a database with that
name. Also, it needs to be translated, which might be hard without some
context. So in back-branches, use empty string, so that the message is
(currently ""), which is at least unambiguous and doens't require
translation. In master, it's no problem to add translatable strings, so use
a different fix there.
|
| |
|
|
|
| |
Backpatch all the way to 8.3. Fixes bug #7811, per report and diagnosis by
Meng Qingzhong.
|
| |
|
|
|
|
|
|
|
| |
Dates outside the supported range could be entered, but would not print
reasonably, and operations such as conversion to timestamp wouldn't behave
sanely either. Since this has the potential to result in undumpable table
data, it seems worth back-patching.
Hitoshi Harada
|
| |
|
|
|
|
|
| |
This seems to have been invented in 2011 to represent GMT+3, non daylight
savings rules, as now used in Europe/Kaliningrad and Europe/Minsk.
There are no conflicts so might as well add it to the Default list.
Per bug #7804 from Ruslan Izmaylov.
|
| |
|
|
| |
JiangGuiqing
|
| |
|
|
|
|
|
|
|
|
|
|
| |
transformExpr() is required to cope with already-transformed expression
trees, for various ugly-but-not-quite-worth-cleaning-up reasons. However,
some of its newer subroutines hadn't gotten the memo. This accounts for
bug #7763 from Norbert Buchmuller: transformRowExpr() was overwriting the
previously determined type of a RowExpr during CREATE TABLE LIKE INCLUDING
INDEXES. Additional investigation showed that transformXmlExpr had the
same kind of problem, but all the other cases seem to be safe.
Andres Freund and Tom Lane
|
| |
|
|
|
|
|
|
| |
If a relation file was removed when the server-side counterpart of
pg_basebackup was just about to open it to send it to the client, you'd
get a "could not open file" error. Fix that.
Backpatch to 9.1, this goes back to when pg_basebackup was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If pg_extension_config_dump() is executed again for a table already listed
in the extension's extconfig, the code was blindly making a new array entry.
This does not seem useful. Fix it to replace the existing array entry
instead, so that it's possible for extension update scripts to alter the
filter conditions for configuration tables.
In addition, teach ALTER EXTENSION DROP TABLE to check for an extconfig
entry for the target table, and remove it if present. This is not a 100%
solution because it's allowed for an extension update script to just
summarily DROP a member table, and that code path doesn't go through
ExecAlterExtensionContentsStmt. We could probably make that case clean
things up if we had to, but it would involve sticking a very ugly wart
somewhere in the guts of dependency.c. Since on the whole it seems quite
unlikely that extension updates would want to remove pre-existing
configuration tables, making the case possible with an explicit command
seems sufficient.
Per bug #7756 from Regina Obe. Back-patch to 9.1 where extensions were
introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After the recovery target timeline is changed, we would still recycle and
preallocate WAL segments on the old target timeline. Those WAL segments
created for the old timeline are a waste of space, although otherwise
harmless.
The problem is that when installing a recycled WAL segment as a future one,
ThisTimeLineID is used to construct the filename. ThisTimeLineID is
initialized in the checkpointer process to the recovery target timeline at
startup, but it was not updated when the startup process chooses a new
target timeline (recovery_target_timeline='latest'). To fix, always update
ThisTimeLineID before recycling WAL segments at a restartpoint.
This still leaves a small window where we might install WAL segments under
wrong timeline ID, if the target timeline is changed just as we're about to
start recycling. Also, when we're not on the target timeline yet, but still
replaying some older timeline, we'll install WAL segments to the newer
timeline anyway and they will still go wasted. We'll just live with the
waste in that situation.
Commit to 9.2 and 9.1. Older versions didn't change recovery target timeline
after startup, and for master, I'll commit a slightly different variant of
this.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
During crash recovery, we remove disk files belonging to temporary tables,
but the system catalog entries for such tables are intentionally not
cleaned up right away. Instead, the first backend that uses a temp schema
is expected to clean out any leftover objects therein. This approach
requires that we be careful to ignore leftover temp tables (since any
actual access attempt would fail), *even if their BackendId matches our
session*, if we have not yet established use of the session's corresponding
temp schema. That worked fine in the past, but was broken by commit
debcec7dc31a992703911a9953e299c8d730c778 which incorrectly removed the
rd_islocaltemp relcache flag. Put it back, and undo various changes
that substituted tests like "rel->rd_backend == MyBackendId" for use
of a state-aware flag. Per trouble report from Heikki Linnakangas.
Back-patch to 9.1 where the erroneous change was made. In the back
branches, be careful to add rd_islocaltemp in a spot in the struct that
was alignment padding before, so as not to break existing add-on code.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We failed to ever fill the sixth line (LISTEN_ADDR), which caused the
attempt to fill the seventh line (SHMEM_KEY) to fail, so that the shared
memory key never got added to the file in standalone mode. This has been
broken since we added more content to our lock files in 9.1.
To fix, tweak the logic in CreateLockFile to add an empty LISTEN_ADDR
line in standalone mode. This is a tad grotty, but since that function
already knows almost everything there is to know about the contents of
lock files, it doesn't seem that it's any better to hack it elsewhere.
It's not clear how significant this bug really is, since a standalone
backend should never have any children and thus it seems not critical
to be able to check the nattch count of the shmem segment externally.
But I'm going to back-patch the fix anyway.
This problem had escaped notice because of an ancient (and in hindsight
pretty dubious) decision to suppress LOG-level messages by default in
standalone mode; so that the elog(LOG) complaint in AddToDataDirLockFile
that should have warned of the problem didn't do anything. Fixing that
is material for a separate patch though.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The dynahash code requires the number of buckets in a hash table to fit
in an int; but since we calculate the desired hash table size dynamically,
there are various scenarios where we might calculate too large a value.
The resulting overflow can lead to infinite loops, division-by-zero
crashes, etc. I (tgl) had previously installed some defenses against that
in commit 299d1716525c659f0e02840e31fbe4dea3, but that covered only one
call path. Moreover it worked by limiting the request size to work_mem,
but in a 64-bit machine it's possible to set work_mem high enough that the
problem appears anyway. So let's fix the problem at the root by installing
limits in the dynahash.c functions themselves.
Trouble report and patch by Jeff Davis.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
EndRecPtr is the last record that we've read, but not necessarily yet
replayed. CheckRecoveryConsistency should compare minRecoveryPoint with the
last replayed record instead. This caused recovery to think it's reached
consistency too early.
Now that we do the check in CheckRecoveryConsistency correctly, we have to
move the call of that function to after redoing a record. The current place,
after reading a record but before replaying it, is wrong. In particular, if
there are no more records after the one ending at minRecoveryPoint, we don't
enter hot standby until one extra record is generated and read by the
standby, and CheckRecoveryConsistency is called. These two bugs conspired
to make the code appear to work correctly, except for the small window
between reading the last record that reaches minRecoveryPoint, and
replaying it.
In the passing, rename recoveryLastRecPtr, which is the last record
replayed, to lastReplayedEndRecPtr. This makes it slightly less confusing
with replayEndRecPtr, which is the last record read that we're about to
replay.
Original report from Kyotaro HORIGUCHI, further diagnosis by Fujii Masao.
Backpatch to 9.0, where Hot Standby subtly changed the test from
"minRecoveryPoint < EndRecPtr" to "minRecoveryPoint <= EndRecPtr". The
former works because where the test is performed, we have always read one
more record than we've replayed.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
database.
Normally each module is tested in a database named contrib_regression,
which is dropped and recreated at the beginhning of each pg_regress run.
This new mode, enabled by adding USE_MODULE_DB=1 to the make command
line, runs most modules in a database with the module name embedded in
it.
This will make testing pg_upgrade on clusters with the contrib modules
a lot easier.
Second attempt at this, this time accomodating make versions older
than 3.82.
Still to be done: adapt to the MSVC build system.
Backpatch to 9.0, which is the earliest version it is reasonably
possible to test upgrading from.
|
| |
|
|
|
|
|
|
|
| |
If a file is truncated, we must update minRecoveryPoint. Once a file is
truncated, there's no going back; it would not be safe to stop recovery
at a point earlier than that anymore.
Per report from Kyotaro HORIGUCHI. Backpatch to 8.4. Before that,
minRecoveryPoint was not updated during recovery at all.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If we're not in hot standby mode, then there's no way for users to connect
to reset the recoveryPause flag, so we shouldn't pause. The code was aware
of this but the test to see if pausing was safe was seriously inadequate:
it wasn't paying attention to reachedConsistency, and besides what it was
testing was that we could legally enter hot standby, not that we have
done so. Get rid of that in favor of checking LocalHotStandbyActive,
which because of the coding in CheckRecoveryConsistency is tantamount to
checking that we have told the postmaster to enter hot standby.
Also, move the recoveryPausesHere() call that reacts to asynchronous
recoveryPause requests so that it's not in the middle of application of a
WAL record. I put it next to the recoveryStopsHere() call --- in future
those are going to need to interact significantly, so this seems like a
good waystation.
Also, don't bother trying to read another WAL record if we've already
decided not to continue recovery. This was no big deal when the code was
written originally, but now that reading a record might entail actions like
fetching an archive file, it seems a bit silly to do it like that.
Per report from Jeff Janes and subsequent discussion. The pause feature
needs quite a lot more work, but this gets rid of some indisputable bugs,
and seems safe enough to back-patch.
|
| |
|
|
| |
Patch done by Jiang Guiqing <jianggq@cn.fujitsu.com>.
|
| | |
|
| |
|
|
|
|
| |
named database."
This reverts commit 513e546a6e75b0a79c3102ce22c583ccd1053ac6.
|
