| Commit message (Collapse) | Author | Age |
|---|
| | |
|
| |
|
|
| |
%esp is no good; must use %rsp there.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
|
| |
|
|
|
|
|
| |
In oder to exit on SIGTERM when in non-walsender code,
such as do_pg_stop_backup(), we need to set the interrupt
variables that are used there, and not just the walsender
local ones.
|
| | |
|
| |
|
|
|
|
| |
pg_ctl use that to query the data directory for config-only installs.
This fixes awkward or impossible pg_ctl operation for config-only
installs.
|
| |
|
|
|
|
|
| |
new double-sorting algorithm. The new algorithm produces better quality
trees, making searches faster.
Alexander Korotkov
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CREATE EXTENSION needs to transiently set search_path, as well as
client_min_messages and log_min_messages. We were doing this by the
expedient of saving the current string value of each variable, doing a
SET LOCAL, and then doing another SET LOCAL with the previous value at
the end of the command. This is a bit expensive though, and it also fails
badly if there is anything funny about the existing search_path value,
as seen in a recent report from Roger Niederland. Fortunately, there's a
much better way, which is to piggyback on the GUC infrastructure previously
developed for functions with SET options. We just open a new GUC nesting
level, do our assignments with GUC_ACTION_SAVE, and then close the nesting
level when done. This automatically restores the prior settings without a
re-parsing pass, so (in principle anyway) there can't be an error. And
guc.c still takes care of cleanup in event of an error abort.
The CREATE EXTENSION code for this was modeled on some much older code in
ri_triggers.c, which I also changed to use the better method, even though
there wasn't really much risk of failure there. Also improve the comments
in guc.c to reflect this additional usage.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Arrange for any problems with pre-existing settings to be reported as
WARNING not ERROR, so that we don't undesirably abort the loading of the
incoming add-on module. The bad setting is just discarded, as though it
had never been applied at all. (This requires a change in the API of
set_config_option. After some thought I decided the most potentially
useful addition was to allow callers to just pass in a desired elevel.)
Arrange to restore the complete stacked state of the variable, rather than
cheesily reinstalling only the active value. This ensures that custom GUCs
will behave unsurprisingly even when the module loading operation occurs
within nested subtransactions that have changed the active value. Since a
module load could occur as a result of, eg, a PL function call, this is not
an unlikely scenario.
|
| | |
|
| |
|
|
|
|
|
|
|
|
| |
This oversight meant that on Windows, the pg_settings view would not
display source file or line number information for values coming from
postgresql.conf, unless the backend had received a SIGHUP since starting.
In passing, also make the error detection in read_nondefault_variables a
tad more thorough, and fix it to not lose precision on float GUCs (these
changes are already in HEAD as of my previous commit).
|
| |
|
|
|
|
|
|
|
|
|
|
| |
We used to just remember the GucSource, but saving GucContext too provides
a little more information --- notably, whether a SET was done by a
superuser or regular user. This allows us to rip out the fairly dodgy code
that define_custom_variable used to use to try to infer the context to
re-install a pre-existing setting with. In particular, it now works for
a superuser to SET a extension's SUSET custom variable before loading the
associated extension, because GUC can remember whether the SET was done as
a superuser or not. The plperl regression tests contain an example where
this is useful.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Previously, the code assumed that the only possible action to take was
to delete files behind a certain cutoff point. The async notify code
was already a crock: it used a different "pagePrecedes" function for
truncation than for regular operation. By allowing it to pass a
callback to SlruScanDirectory it can do cleanly exactly what it needs to
do.
The clog.c code also had its own use for SlruScanDirectory, which is
made a bit simpler with this.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This variable provides only marginal error-prevention capability (since
it can only check the prefix of a qualified GUC name), and the consensus
is that that isn't worth the amount of hassle that maintaining the setting
creates for DBAs. So, let's just remove it.
With this commit, the system will silently accept a value for any qualified
GUC name at all, whether it has anything to do with any known extension or
not. (Unqualified names still have to match known built-in settings,
though; and you will get a WARNING at extension load time if there's an
unrecognized setting with that extension's prefix.)
There's still some discussion ongoing about whether to tighten that up and
if so how; but if we do come up with a solution, it's not likely to look
anything like custom_variable_classes.
|
| |
|
|
|
|
|
| |
Thus, an object referenced in a default expression could be dropped while
the function remained present. This was unaccountably missed in the
original patch to add default parameters for functions. Reported by
Pavel Stehule.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch has two distinct purposes: to report multiple problems in
postgresql.conf rather than always bailing out after the first one,
and to change the policy for whether changes are applied when there are
unrelated errors in postgresql.conf.
Formerly the policy was to apply no changes if any errors could be
detected, but that had a significant consistency problem, because in some
cases specific values might be seen as valid by some processes but invalid
by others. This meant that the latter processes would fail to adopt
changes in other parameters even though the former processes had done so.
The new policy is that during SIGHUP, the file is rejected as a whole
if there are any errors in the "name = value" syntax, or if any lines
attempt to set nonexistent built-in parameters, or if any lines attempt
to set custom parameters whose prefix is not listed in (the new value of)
custom_variable_classes. These tests should always give the same results
in all processes, and provide what seems a reasonably robust defense
against loading values from badly corrupted config files. If these tests
pass, all processes will apply all settings that they individually see as
good, ignoring (but logging) any they don't.
In addition, the postmaster does not abandon reading a configuration file
after the first syntax error, but continues to read the file and report
syntax errors (up to a maximum of 100 syntax errors per file).
The postmaster will still refuse to start up if the configuration file
contains any errors at startup time, but these changes allow multiple
errors to be detected and reported before quitting.
Alexey Klyukin, reviewed by Andy Colson and av (Alexander ?)
with some additional hacking by Tom Lane
|
| |
|
|
|
|
|
|
| |
We'll now use "exists" for EXISTS(SELECT ...), "array" for ARRAY(SELECT
...), or the sub-select's own result column name for a simple expression
sub-select. Previously, you usually got "?column?" in such cases.
Marti Raudsepp, reviewed by Kyotaro Horiugchi
|
| |
|
|
|
|
|
|
|
|
|
|
| |
pg_trgm was already doing this unofficially, but the implementation hadn't
been thought through very well and leaked memory. Restructure the core
GiST code so that it actually works, and document it. Ordinarily this
would have required an extra memory context creation/destruction for each
GiST index search, but I was able to avoid that in the normal case of a
non-rescanned search by finessing the handling of the RBTree. It used to
have its own context always, but now shares a context with the
scan-lifespan data structures, unless there is more than one rescan call.
This should make the added overhead unnoticeable in typical cases.
|
| |
|
|
|
|
|
|
| |
This code was looking at the sub-Query tree as seen in the parent query's
RangeTblEntry; but that's the pristine parser output, and what we need to
look at is the tree as it stands at the completion of planning. Otherwise
we might pick up a Var that references a subquery that got flattened and
hence has no RelOptInfo in the subroot. Per report from Peter Geoghegan.
|
| |
|
|
|
|
| |
passing the -b/binary-upgrade flag.
Backpatch to 9.1.X.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If an indexable operator for a non-collatable indexed datatype has a
collatable right-hand input type, any OpExpr for it will be marked with a
nonzero inputcollid (since having one collatable input is sufficient to
make that happen). However, an index on a non-collatable column certainly
doesn't have any collation. This caused us to fail to match such operators
to their indexes, because indxpath.c required an exact match of index
collation and clause collation. It seems correct to allow a match when the
index is collation-less regardless of the clause's inputcollid: an operator
with both noncollatable and collatable inputs could perhaps depend on the
collation of the collatable input, but it could hardly expect the index for
the noncollatable input to have that same collation.
Per bug #6232 from Pierre Ducroquet. His example is specifically about
"hstore ? text" but the problem seems quite generic.
|
| |
|
|
|
|
| |
We now report errors reported by the just-unblocked and unblocking
transactions identically; this should fix relatively common buildfarm
failures reported by animals that are failing the "wrong" session.
|
| | |
|
| |
|
|
|
|
|
|
| |
In hio.c, document how we avoid deadlock with respect to visibility map
buffer locks. In visibilitymap.c, update the LOCKING section of the
file header comment.
Both oversights noted by Heikki Linnakangas.
|
| |
|
|
|
| |
Bug found by Alvaro Herrera, fix suggested by Heikki Linnakangas
and reviewed by Tom Lane.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit c1d9579dd8bf3c921ca6bc2b62c40da6d25372e5, I changed things so
that the output of the Agg node that feeds the window functions would not
list any ungrouped Vars directly. Formerly, for example, the Agg tlist
might have included both "x" and "sum(x)", which is not really valid if
"x" isn't a grouping column. If we then had a window function ordering on
something like "sum(x) + 1", prepare_sort_from_pathkeys would find no exact
match for this in the Agg tlist, and would conclude that it must recompute
the expression. But it would break the expression down to just the Var
"x", which it would find in the tlist, and then rebuild the ORDER BY
expression using a reference to the subplan's "x" output. Now, after the
above-referenced changes, "x" isn't in the Agg tlist if it's not a grouping
column, so that prepare_sort_from_pathkeys fails with "could not find
pathkey item to sort", as reported by Bricklen Anderson.
The fix is to not break down Aggrefs into their component parts, but just
treat them as irreducible expressions to be sought in the subplan tlist.
This is definitely OK for the use with respect to window functions in
grouping_planner, since it just built the tlist being used on the same
basis. AFAICT it is safe for other uses too; most of the other call sites
couldn't encounter Aggrefs anyway.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In REPEATABLE READ (nee SERIALIZABLE) mode, an attempt to do
GetTransactionSnapshot() between AbortTransaction and CleanupTransaction
failed, because GetTransactionSnapshot would recompute the transaction
snapshot (which is already wrong, given the isolation mode) and then
re-register it in the TopTransactionResourceOwner, leading to an Assert
because the TopTransactionResourceOwner should be empty of resources after
AbortTransaction. This is the root cause of bug #6218 from Yamamoto
Takashi. While changing plancache.c to avoid requesting a snapshot when
handling a ROLLBACK masks the problem, I think this is really a snapmgr.c
bug: it's lower-level than the resource manager mechanism and should not be
shutting itself down before we unwind resource manager resources. However,
just postponing the release of the transaction snapshot until cleanup time
didn't work because of the circular dependency with
TopTransactionResourceOwner. Fix by managing the internal reference to
that snapshot manually instead of depending on TopTransactionResourceOwner.
This saves a few cycles as well as making the module layering more
straightforward. predicate.c's dependencies on TopTransactionResourceOwner
go away too.
I think this is a longstanding bug, but there's no evidence that it's more
than a latent bug, so it doesn't seem worth any risk of back-patching.
|
| |
|
|
|
|
|
| |
Cache assorted data in the PLpgSQL_arrayelem struct to avoid repetitive
catalog lookups over multiple executions of the same statement.
Pavel Stehule
|
| |
|
|
|
|
|
| |
This was partially fixed by 57fdb2b0d835fe201434fc28bf5dabf83ada26d1,
back in 2005, but it missed a couple of spots.
YAMAMOTO Takashi
|
| |
|
|
|
|
|
|
| |
The code path that tried a generic plan, didn't like it, and then made a
custom plan was mistakenly passing the same copy of the query_list to the
planner both times. This doesn't work too well for nontrivial queries,
since the planner tends to scribble on its input. Diagnosis and fix by
Yamamoto Takashi.
|
| |
|
|
|
|
|
| |
The keywords and values arguments of these functions are more properly
declared "const char * const *" than just "const char **".
Lionel Elie Mamane, reviewed by Craig Ringer
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
I had copied-and-pasted a claim that we couldn't reach this point when
dealing with utility statements, but that was a leftover from when the
caller was required to supply a plan to start with. We now will go
through here at least once when handling a utility statement, so it
seems worth a check to see whether a snapshot is actually needed.
(Note that analyze_requires_snapshot is quite a cheap test.)
Per suggestion from Yamamoto Takashi. I don't think I believe that this
resolves his reported assertion failure; but it's worth changing anyway,
just to save a cycle or two.
|
| |
|
|
| |
files so include removal is more predictable.
|
| |
|
|
|
|
|
|
|
| |
pg_dump has historically understood -Z with no -F switch to mean that
it should emit a gzip-compressed version of its plain text output.
This got broken through a misunderstanding in the 9.1 patch that added
directory output format. Restore the former behavior.
Per complaint from Roger Niederland and diagnosis by Adrian Klaver.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The constraint exclusion feature checks for contradictions among scan
restriction clauses, as well as contradictions between those clauses and a
table's CHECK constraints. The first aspect of this testing can be useful
for non-table relations (such as subqueries or functions-in-FROM), but the
feature was coded with only the CHECK case in mind so we were applying it
only to plain-table RTEs. Move the relation_excluded_by_constraints call
so that it is applied to all RTEs not just plain tables. With the default
setting of constraint_exclusion this results in no extra work, but with
constraint_exclusion = ON we will detect optimizations that we missed
before (at the cost of more planner cycles than we expended before).
Per a gripe from Gunnlaugur Þór Briem. Experimentation with
his example also showed we were not being very bright about the case where
constraint exclusion is proven within a subquery within UNION ALL, so tweak
the code to allow set_append_rel_pathlist to recognize such cases.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We were mapping "Central America Standard Time" to "CST6CDT", which seems
entirely wrong, because according to the Olson timezone database noplace
in Central America observes daylight savings time on any regular basis ---
and certainly not according to the USA DST rules that are implied by
"CST6CDT". (Mexico is an exception, but they can be disregarded since
they have a separate timezone name in Windows.) So, map this zone name to
plain "CST6", which will provide a fixed UTC offset.
As written, this patch will also result in mapping "Central America
Daylight Time" to CST6. I considered hacking things so that would still
map to CST6CDT, but it seems it would confuse win32tzlist.pl to put those
two names in separate entries. Since there's little evidence that any
such zone name is used in the wild, much less that CST6CDT would be a good
match for it, I'm not too worried about what we do with it.
Per complaint from Pratik Chirania.
|
| |
|
|
| |
I wasn't aware of this script till Magnus mentioned it just now ...
|
| |
|
|
|
|
|
| |
This is not actually used anywhere yet, but it gets the basic
infrastructure in place. It is fairly likely that there are bugs, and
support for some important platforms may be missing, so we'll need to
refine this as we go along.
|
| |
|
|
| |
Fujii Masao, reviewed by Cédric Villemain, with some doc changes by me.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This provides information about the numbers of tuples that were visited
but not returned by table scans, as well as the numbers of join tuples
that were considered and discarded within a join plan node.
There is still some discussion going on about the best way to report counts
for outer-join situations, but I think most of what's in the patch would
not change if we revise that, so I'm going to go ahead and commit it as-is.
Documentation changes to follow (they weren't in the submitted patch
either).
Marko Tiikkaja, reviewed by Marc Cousin, somewhat revised by Tom
|
| |
|
|
|
|
|
|
| |
Per bug #6205, reported by Abel Abraham Camarillo Ojeda. This isn't a
particularly elegant fix, but I'm trying to minimize the chances of
causing yet another round of breakage.
Adjust regression tests to exercise this case.
|
| |
|
|
| |
Forgot to consider this case ...
|
| |
|
|
|
|
|
|
|
|
| |
The standardized errno code for "no such locale" failures is ENOENT, which
we were just reporting at face value, viz "No such file or directory".
Per gripe from Thom Brown, this might confuse users, so add an errdetail
message to clarify what it means. Also, report newlocale() failures as
ERRCODE_INVALID_PARAMETER_VALUE rather than using
errcode_for_file_access(), since newlocale()'s errno values aren't
necessarily tied directly to file access failures.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
plpgsql's exec_stmt_execsql was Assert'ing that a CachedPlanSource was
is_valid immediately after exec_prepare_plan. The risk factor in this case
is that after building the prepared statement, exec_prepare_plan calls
exec_simple_check_plan, which might try to generate a generic plan --- and
with CLOBBER_CACHE_ALWAYS or other unusual causes of invalidation, that
could result in an invalidation. However, that path could only be taken
for a SELECT query, for which we need not set mod_stmt. So in this case
I think it's best to just remove the Assert; it's okay to look at a
slightly-stale querytree for what we need here. Per buildfarm testing.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The regression tests were failing with CLOBBER_CACHE_ALWAYS enabled,
as reported by buildfarm member jaguar. There was an Assert in
BuildCachedPlan that asserted that the CachedPlanSource hadn't been
invalidated since we called RevalidateCachedQuery, which in theory can't
happen because we are holding locks on all the relevant database objects.
However, CLOBBER_CACHE_ALWAYS generates a false positive by making an
invalidation happen anyway; and on reflection, that could also occur as a
result of a badly-timed sinval reset due to queue overflow. We could just
remove the Assert and forge ahead with the not-really-stale querytree, but
it seems safer to do another RevalidateCachedQuery call just to make real
sure everything's OK.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit 79b2ee20c8a041a85dd230c4e787bef22edae57b, which proved
to not be very informative; it looks like the "pgstat wait timeout"
warnings in the buildfarm are just a symptom of running on heavily loaded
machines, and there isn't any weird mechanism causing them to appear.
To try to reduce the frequency of buildfarm failures from this effect,
increase PGSTAT_MAX_WAIT_TIME from 5 seconds to 10.
Also, arrange to not send a fresh inquiry message every single time through
the loop, as that seems more likely to cause problems (by swamping the
collector) than fix them. We'll now send an inquiry the first time through
the delay loop, and every 640 msec thereafter.
|
| |
|
|
|
|
|
|
|
|
| |
As observed by Heikki, we need not conflict on heap page locks during an
insert; heap page locks are only aggregated tuple locks, they don't imply
locking "gaps" as index page locks do. So we can avoid some unnecessary
conflicts, and also do the SSI check while not holding exclusive lock on
the target buffer.
Kevin Grittner, reviewed by Jeff Davis. Back-patch to 9.1.
|
| |
|
|
|
|
|
| |
Now that a NULL ParamListInfo pointer causes significantly different
behavior in plancache.c, be sure to pass it that way when the expression
is known not to reference any plpgsql variables. Saves a few setup
cycles anyway.
|
