| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
| |
This affects date_in(), and a couple of other funcions that use DecodeDate().
Hitoshi Harada
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The tar output module did some very ugly and ultimately incorrect hacking
on COPY commands to try to get them to work in the context of restoring a
deconstructed tar archive. In particular, it would fail altogether for
table names containing any upper-case characters, since it smashed the
command string to lower-case before modifying it (and, just to add insult
to injury, did that in a way that would fail in multibyte encodings).
I don't see any particular value in being flexible about the case of the
command keywords, since the string will just have been created by
dumpTableData, so let's get rid of the whole case-folding thing.
Also, it doesn't seem to meet the POLA for the script to restore data only
in COPY mode, so add \i commands to make it have comparable behavior in
--inserts mode.
Noted while looking at the tar-output code in connection with Brian
Weaver's patch.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Back-patch portions of commit 05b555d12bc2ad0d581f48a12b45174db41dc10d.
There doesn't seem to be any reason not to fix pg_basebackup fully, but
we can't change pg_dump's "magic" string without breaking older versions
of pg_restore. Instead, just patch pg_restore to accept either version
of the magic string, in hopes of avoiding compatibility problems when
9.3 comes out. I also fixed pg_dump to write the correct 2-block EOF
marker, since that won't create a compatibility problem with pg_restore
and it could help with some versions of tar.
Brian Weaver and Tom Lane
|
| |
|
|
|
|
|
|
| |
This fixes another error in commit 9e8da0f75731aaa7605cf4656c21ea09e84d2eb1.
I neglected to make the mark/restore functionality save and restore the
current set of array key values, which led to strange behavior if an
IndexScan with ScalarArrayOpExpr quals was used as the inner side of a
mergejoin. Per bug #7570 from Melese Tesfaye.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This worked fine for superusers, but not for ordinary users trying to
cancel their own processes. Tweak the order the checks are done in so
that we correctly return SIGNAL_BACKEND_ERROR (which current callers
know to ignore without erroring out) so that an ordinary user can loop
through a resultset without fearing that a process might exit in the
middle of said looping -- causing the remaining processes to go
unsignalled.
Incidentally, the last in-core caller of IsBackendPid() is now gone.
However, the function is exported and must remain in place, because
there are plenty of callers in external modules.
Author: Josh Kupershmidt
Reviewed by Noah Misch
|
| |
|
|
|
| |
Small oversight in commit 0f524ea0cf388a149f362e48a33c01662eeddc04 ...
per report from Grazvydas Valeika.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
These calls were removed in commit 4240e429d0c2d889d0cda23c618f94e12c13ade7
as part of a general refactoring and improvement of DDL locking. However,
there's a problem not solved by the rewrite, which is that GRANT/REVOKE
update pg_class.relacl without taking any particular lock on the target
table as such. If another backend fails to do AcceptInvalidationMessages,
it won't notice a recently-committed change in ACLs. Bug #7557 from Piotr
Czachur demonstrates that there's at least one code path in 9.2.0 in which
a command fails to do any AcceptInvalidationMessages calls at all, if the
current transaction already holds all the locks it will need.
Since we're hard up against the release deadline for 9.2.1, fix this by
putting back the AcceptInvalidationMessages calls in heap_openrv and
heap_openrv_extended, thereby restoring the historical behavior in this
area. We ought to look for a more elegant and perhaps more bulletproof
solution, but there's no time for that right now.
|
| |
|
|
| |
DST law changes in Fiji.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
| |
In commit 9e8da0f75731aaa7605cf4656c21ea09e84d2eb1, I improved btree
to handle ScalarArrayOpExpr quals natively, so that constructs like
"indexedcol IN (list)" could be supported by index-only scans. Using
such a qual results in multiple scans of the index, under-the-hood.
I went to some lengths to ensure that this still produces rows in index
order ... but I failed to recognize that if a higher-order index column
is lacking an equality constraint, rescans can produce out-of-order
data from that column. Tweak the planner to not expect sorted output
in that case. Per trouble report from Robert McGehee.
|
| |
|
|
|
| |
Not sure how we missed this case, but we did. Per bug #7551 from
Diego de Lima.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some experimentation with examples similar to bug #7539 has convinced me
that indxpath.c's original implementation of parameterized-path generation
was several bricks shy of a load. In general, if we are relying on a
particular outer rel or set of outer rels for a parameterized path, the
path should use every indexable join clause that's available from that rel
or rels. Any join clauses that get left out of the indexqual will end up
getting applied as plain filter quals (qpquals), and that's generally a
significant loser compared to having the index AM enforce them. (This is
particularly true with btree, which can skip the index scan entirely if
it can see that the given indexquals are mutually contradictory.) The
original heuristics failed to ensure this, though, and were overly
complicated anyway. Rewrite to make the code explicitly identify each
useful set of outer rels and then select all applicable join clauses for
each one. The one plan that changes in the regression tests is in fact
for the better according to the planner's cost estimates.
(Note: this is not a correctness issue but just a matter of plan quality.
I don't yet know what is going on in bug #7539, but I don't expect this
change to fix that.)
|
| |
|
|
|
|
|
|
|
| |
Recovery code documents clearly that a shutdown checkpoint is executed at
end of recovery - a shutdown checkpoint WAL record is written but the buffer
manager had been altered to treat end of recovery as a normal checkpoint.
This bug exacerbates the bufmgr relpersistence bug.
Bug spotted by Andres Freund, patch by me.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Back-patch commits 9afc6481117d2dd936e752da0424a2b6b05f6459 and
b8fbbcf37f22c5e8361da939ad0fc4be18a34ca9. The first of these is really
a minor code cleanup to save a few cycles, but it turns out to provide
a workaround for the misoptimization problem described in bug #7516.
The second commit adds a regression test case.
Back-patch the fix to all active branches. The test case only works
as far back as 9.0, because it relies on plpgsql which isn't installed
by default before that. (I didn't have success modifying it into an
all-plperl form that still provoked a crash, though this may just reflect
my lack of Perl-fu.)
|
| |
|
|
|
|
|
| |
This can result in buffers failing to be properly flushed at
checkpoint time, leading to data loss.
Report, diagnosis, and patch by Jeff Davis.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit 1bc16a946008a7cbb33a9a06a7c6765a807d7f59 I added a minor
optimization to drop the component variables of a GROUP BY expression from
the target list computed at the aggregation level of a query, if those Vars
weren't referenced elsewhere in the tlist. However, I overlooked that the
window-function planning code would deconstruct such expressions and thus
need to have access to their component variables. Fix it to not do that.
While at it, I removed the distinction between volatile and nonvolatile
window partition/order expressions: the code now computes all of them
at the aggregation level. This saves a relatively expensive check for
volatility, and it's unclear that the resulting plan isn't better anyway.
Per bug #7535 from Louis-David Mitterrand. Back-patch to 9.2.
|
| |
|
|
|
|
| |
Backpatch to 9.2.
Etsuro Fujit
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
I made multiple errors in commit 97532f7c29468010b87e40a04f8daa3eb097f654,
stemming mostly from failure to think about the available frequency data
as being element frequencies not value frequencies (so that occurrences of
different elements are not mutually exclusive). This led to sillinesses
such as estimating that "word" would match more rows than "word:*".
The choice to clamp to a minimum estimate of DEFAULT_TS_MATCH_SEL also
seems pretty ill-considered in hindsight, as it would frequently result in
an estimate much larger than the available data suggests. We do need some
sort of clamp, since a pattern not matching any of the MCELEMs probably
still needs a selectivity estimate of more than zero. I chose instead to
clamp to at least what a non-MCELEM word would be estimated as, preserving
the property that "word:*" doesn't get an estimate less than plain "word",
whether or not the word appears in MCELEM.
Per investigation of a gripe from Bill Martin, though I suspect that his
example case actually isn't even reaching the erroneous code.
Back-patch to 9.1 where this code was introduced.
|
| |
|
|
|
|
| |
This follows recent addition of Windows/Mingw testing.
Backpatch to Release 9.2 so we can get some buildfarm testing
going.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
validate_plperl_function() supposed that it could free an old
plperl_proc_desc struct immediately upon detecting that it was stale.
However, if a plperl function is called recursively, this could result
in deleting the struct out from under an outer invocation, leading to
misbehavior or crashes. Add a simple reference-count mechanism to
ensure that such structs are freed only when the last reference goes
away.
Per investigation of bug #7516 from Marko Tiikkaja. I am not certain
that this error explains his report, because he says he didn't have
any recursive calls --- but it's hard to see how else it could have
crashed right there. In any case, this definitely fixes some problems
in the area.
Back-patch to all active branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Investigation shows that some intermittent build failures in ecpg are the
result of a gmake bug that was reported quite some time ago:
http://savannah.gnu.org/bugs/?30653
Preventing parallel builds of the ecpg subdirectories seems to dodge the
bug. Per yesterday's pgsql-hackers discussion, there are some other things
in the subdirectory makefiles that seem rather unsafe for parallel builds
too, but there's little point in fixing them as long as we have to work
around a make bug.
Back-patch to 9.1; parallel builds weren't very well supported before
that anyway.
|
| |
|
|
|
|
|
|
|
|
|
| |
Commit 2cfb1c6f77734db81b6e74bcae630f93b94f69be fixed some issues caused
by Python 3.3 choosing to iterate through dict entries in a different order
than before. But here's another one: the test cases adjusted here made two
bad entries in a dict and expected the one complained of would always be
the same.
Possibly this should be back-patched further than 9.2, but there seems
little point unless the earlier fix is too.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The planner previously assumed that parameter Vars having the same absolute
query level, varno, and varattno could safely be assigned the same runtime
PARAM_EXEC slot, even though they might be different Vars appearing in
different subqueries. This was (probably) safe before the introduction of
CTEs, but the lazy-evalution mechanism used for CTEs means that a CTE can
be executed during execution of some other subquery, causing the lifespan
of Params at the same syntactic nesting level as the CTE to overlap with
use of the same slots inside the CTE. In 9.1 we created additional hazards
by using the same parameter-assignment technology for nestloop inner scan
parameters, but it was broken before that, as illustrated by the added
regression test.
To fix, restructure the planner's management of PlannerParamItems so that
items having different semantic lifespans are kept rigorously separated.
This will probably result in complex queries using more runtime PARAM_EXEC
slots than before, but the slots are cheap enough that this hardly matters.
Also, stop generating PlannerParamItems containing Params for subquery
outputs: all we really need to do is reserve the PARAM_EXEC slot number,
and that now only takes incrementing a counter. The planning code is
simpler and probably faster than before, as well as being more correct.
Per report from Vik Reykja.
Back-patch of commit 46c508fbcf98ac334f1e831d21021d731c882fbb into all
branches that support WITH.
|
| | |
|
| |
|
|
|
| |
This affects initdb, clusterdb, reindexdb, and vacuumdb in master
and 9.2; in earlier branches, only initdb is affected.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
| |
When the startup process restores a WAL file from the archive, it deletes
any old file with the same name and renames the new file in its place. On
Windows, however, when a file is deleted, it still lingers as long as a
process holds a file handle open on it. With cascading replication, a
walsender process can hold the old file open, so the rename() in the startup
process would fail. To fix that, rename the old file to a temporary name, to
make the original file name available for reuse, before deleting the old
file.
|
| |
|
|
|
|
|
|
| |
Give the correct name of the GUC parameter being complained of.
Also, emit a more suitable SQLSTATE (INVALID_PARAMETER_VALUE,
not the default INTERNAL_ERROR).
Gurjeet Singh, errcode adjustment by me
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Perl, for some unaccountable reason, believes it's a good idea to reset
SIGFPE handling to SIG_IGN. Which wouldn't be a good idea even if it
worked; but on some platforms (Linux at least) it doesn't work at all,
instead resulting in forced process termination if the signal occurs.
Given the lack of other complaints, it seems safe to assume that Perl
never actually provokes SIGFPE and so there is no value in the setting
anyway. Hence, reset it to our normal handler after initializing Perl.
Report, analysis and patch by Andres Freund.
|
| |
|
|
| |
Reported by Peter Eisentraut.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The cascading replication code assumed that the current RecoveryTargetTLI
never changes, but that's not true with recovery_target_timeline='latest'.
The obvious upshot of that is that RecoveryTargetTLI in shared memory needs
to be protected by a lock. A less obvious consequence is that when a
cascading standby is connected, and the standby switches to a new target
timeline after scanning the archive, it will continue to stream WAL to the
cascading standby, but from a wrong file, ie. the file of the previous
timeline. For example, if the standby is currently streaming from the middle
of file 000000010000000000000005, and the timeline changes, the standby
will continue to stream from that file. However, the WAL on the new
timeline is in file 000000020000000000000005, so the standby sends garbage
from 000000010000000000000005 to the cascading standby, instead of the
correct WAL from file 000000020000000000000005.
This also fixes a related bug where a partial WAL segment is restored from
the archive and streamed to a cascading standby. The code assumed that when
a WAL segment is copied from the archive, it can immediately be fully
streamed to a cascading standby. However, if the segment is only partially
filled, ie. has the right size, but only N first bytes contain valid WAL,
that's not safe. That can happen if a partial WAL segment is manually copied
to the archive, or if a partial WAL segment is archived because a server is
started up on a new timeline within that segment. The cascading standby will
get confused if the WAL it received is not valid, and will get stuck until
it's restarted. This patch fixes that problem by not allowing WAL restored
from the archive to be streamed to a cascading standby until it's been
replayed, and thus validated.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Serializable Snapshot Isolation used for serializable transactions
depends on acquiring SIRead locks on all heap relation tuples which
are used to generate the query result, so that a later delete or
update of any of the tuples can flag a read-write conflict between
transactions. This is normally handled in heapam.c, with tuple level
locking. Since an index-only scan avoids heap access in many cases,
building the result from the index tuple, the necessary predicate
locks were not being acquired for all tuples in an index-only scan.
To prevent problems with tuple IDs which are vacuumed and re-used
while the transaction still matters, the xmin of the tuple is part of
the tag for the tuple lock. Since xmin is not available to the
index-only scan for result rows generated from the index tuples, it
is not possible to acquire a tuple-level predicate lock in such
cases, in spite of having the tid. If we went to the heap to get the
xmin value, it would no longer be an index-only scan. Rather than
prohibit index-only scans under serializable transaction isolation,
we acquire an SIRead lock on the page containing the tuple, when it
was not necessary to visit the heap for other reasons.
Backpatch to 9.2.
Kevin Grittner and Tom Lane
|
| |
|
|
|
|
|
|
|
|
| |
Each setup block is run as a single PQexec submission, and some
statements such as VACUUM cannot be combined with others in such a
block.
Backpatch to 9.2.
Kevin Grittner and Tom Lane
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Formerly it would only show them for relkinds 'r' and 'f' (plain tables
and foreign tables). However, as of 9.2, views can also have reloptions,
namely security_barrier. The relkind restriction seems pointless and
not at all future-proof, so just print reloptions whenever there are any.
In passing, make some cosmetic improvements to the code that pulls the
"tableinfo" fields out of the PGresult.
Noted and patched by Dean Rasheed, with adjustment for all relkinds by me.
|
| |
|
|
|
|
|
|
|
|
|
| |
This was removed in commit cd004067742ee16ee63e55abfb4acbd5f09fbaab,
we're not quite sure why, but there have been reports of crashes due
to AS Perl being built with it when we are not, and it certainly
seems like the right thing to do. There is still some uncertainty
as to why it sometimes fails and sometimes doesn't.
Original patch from Owais Khani, substantially reworked and
extended by Andrew Dunstan.
|
| |
|
|
|
|
|
|
|
|
|
| |
We previously supposed that any given platform would supply both or neither
of these functions, so that one configure test would be sufficient. It now
appears that at least on AIX this is not the case ... which is likely an
AIX bug, but nonetheless we need to cope with it. So use separate tests.
Per bug #6758; thanks to Andrew Hastie for doing the followup testing
needed to confirm what was happening.
Backpatch to 9.1, where we began using these functions.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This back-ports commits c8ba697a4bdb934f0c51424c654e8db6133ea255 and
e5db11c5582b469c04a11f217a0f32c827da5dd7, which fix one definite and one
speculative bug in gistchoose, and make the code a lot more intelligible as
well. In 9.2 only, this also affects the largely-copied-and-pasted logic
in gistRelocateBuildBuffersOnSplit.
The impact of the bugs was that the functions might make poor decisions
as to which index tree branch to push a new entry down into, resulting in
GiST index bloat and poor performance. The fixes rectify these decisions
for future insertions, but a REINDEX would be needed to clean up any
existing index bloat.
Alexander Korotkov, Robert Haas, Tom Lane
|
| |
|
|
| |
Per note from Peter Eisentraut.
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
| |
This threw ERROR, not the expected NOTICE, if the index didn't exist.
The bug was actually visible in not-as-expected regression test output,
so somebody wasn't paying too close attention in commit
8cb53654dbdb4c386369eb988062d0bbb6de725e.
Per report from Brendan Byrd.
|
| |
|
|
|
| |
It still thought that the --xlog-method option argument could be
empty, as in a previous version of this feature.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The GUC check hooks for transaction_read_only and transaction_isolation
tried to check RecoveryInProgress(), so as to disallow setting read/write
mode or serializable isolation level (respectively) in hot standby
sessions. However, GUC check hooks can be called in many situations where
we're not connected to shared memory at all, resulting in a crash in
RecoveryInProgress(). Among other cases, this results in EXEC_BACKEND
builds crashing during child process start if default_transaction_isolation
is serializable, as reported by Heikki Linnakangas. Protect those calls
by silently allowing any setting when not inside a transaction; which is
okay anyway since these GUCs are always reset at start of transaction.
Also, add a check to GetSerializableTransactionSnapshot() to complain
if we are in hot standby. We need that check despite the one in
check_XactIsoLevel() because default_transaction_isolation could be
serializable. We don't want to complain any sooner than this in such
cases, since that would prevent running transactions at all in such a
state; but a transaction can be run, if SET TRANSACTION ISOLATION is done
before setting a snapshot. Per report some months ago from Robert Haas.
Back-patch to 9.1, since these problems were introduced by the SSI patch.
Kevin Grittner and Tom Lane, with ideas from Heikki Linnakangas
|
| | |
|
| |
|
|
|
|
| |
When an invalid query parameter is reported, some memory leaks.
found by Coverity
|
| | |
|
| | |
|
