| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
inline_cte() expected to find exactly as many references to the
target CTE as its cterefcount indicates. While that should be
accurate for the tree as emitted by the parser, there are some
optimizations that occur upstream of here that could falsify it,
notably removal of unused subquery output expressions.
Trying to make the accounting 100% accurate seems expensive and
doomed to future breakage. It's not really worth it, because
all this code is protecting is downstream assumptions that every
referenced CTE has a plan. Let's convert those assertions to
regular test-and-elog just in case there's some actual problem,
and then drop the failing assertion.
Per report from Tomas Vondra (thanks also to Richard Guo for
analysis). Back-patch to v12 where the faulty code came in.
Discussion: https://postgr.es/m/29196a1e-ed47-c7ca-9be2-b1c636816183@enterprisedb.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit b3b4d8e68a moved our perl test modules to a better namespace
structure, but this has made life hard for people wishing to backpatch
improvements in the TAP tests. Here we alleviate much of that difficulty
by implementing the new module names on top of the old modules, mostly
by using a little perl typeglob aliasing magic, so that we don't have a
dual maintenance burden. This should work both for the case where a new
test is backpatched and the case where a fix to an existing test that
uses the new namespace is backpatched.
Reviewed by Michael Paquier
Per complaint from Andres Freund
Discussion: https://postgr.es/m/20220418141530.nfxtkohefvwnzncl@alap3.anarazel.de
Applied to branches 10 through 14
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CLUSTER sort won't use the datum1 SortTuple field when clustering
against an index whose leading key is an expression. This makes it
unsafe to use the abbreviated keys optimization, which was missed by the
logic that sets up SortSupport state. Affected tuplesorts output tuples
in a completely bogus order as a result (the wrong SortSupport based
comparator was used for the leading attribute).
This issue is similar to the bug fixed on the master branch by recent
commit cc58eecc5d. But it's a far older issue, that dates back to the
introduction of the abbreviated keys optimization by commit 4ea51cdfe8.
Backpatch to all supported versions.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKG+bA+bmwD36_oDxAoLrCwZjVtST2fqe=b4=qZcmU7u89A@mail.gmail.com
Backpatch: 10-
|
| |
|
|
|
|
|
|
|
|
| |
Such cases will lead to infinite loops, so they're of no practical
value. The numeric variant of generate_series() already threw error
for this, so borrow its message wording.
Per report from Richard Wesley. Back-patch to all supported branches.
Discussion: https://postgr.es/m/91B44E7B-68D5-448F-95C8-B4B3B0F5DEAF@duckdblabs.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
psql, pg_dump, and pg_amcheck share code to process object name
patterns like 'foo*.bar*' to match all tables with names starting in
'bar' that are in schemas starting with 'foo'. Before v14, any number
of extra name parts were silently ignored, so a command line '\d
foo.bar.baz.bletch.quux' was interpreted as '\d bletch.quux'. In v14,
as a result of commit 2c8726c4b0a496608919d1f78a5abc8c9b6e0868, we
instead treated this as a request for table quux in a schema named
'foo.bar.baz.bletch'. That caused problems for people like Justin
Pryzby who were accustomed to copying strings of the form
db.schema.table from messages generated by PostgreSQL itself and using
them as arguments to \d.
Accordingly, revise things so that if an object name pattern contains
more parts than we're expecting, we throw an error, unless there's
exactly one extra part and it matches the current database name.
That way, thisdb.myschema.mytable is accepted as meaning just
myschema.mytable, but otherdb.myschema.mytable is an error, and so
is some.random.garbage.myschema.mytable.
Mark Dilger, per report from Justin Pryzby and discussion among
various people.
Discussion: https://www.postgresql.org/message-id/20211013165426.GD27491%40telsasoft.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
An ALTER FUNCTION command that tried to update both the function's
proparallel property and its proconfig list failed to do the former,
because it stored the new proparallel value into a tuple that was
no longer the interesting one. Carelessness in 7aea8e4f2.
(I did not bother with a regression test, because the only likely
future breakage would be for someone to ignore the comment I added
and add some other field update after the heap_modify_tuple step.
A test using existing function properties could not catch that.)
Per report from Bryn Llewellyn. Back-patch to all supported branches.
Discussion: https://postgr.es/m/8AC9A37F-99BD-446F-A2F7-B89AD0022774@yugabyte.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The new numeric code for extract epoch from interval accidentally
truncated the DAYS_PER_YEAR value to an integer, leading to results
that mismatched the floating-point interval_part calculations.
The commit a2da77cdb4661826482ebf2ddba1f953bc74afe4 that introduced
this actually contains the regression test change that this reverts.
I suppose this was missed at the time.
Reported-by: Joseph Koshakow <koshy44@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/CAAvxfHd5n%3D13NYA2q_tUq%3D3%3DSuWU-CufmTf-Ozj%3DfrEgt7pXwQ%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We don't allow to invoke more sync workers once we have reached the sync
worker limit per subscription. But the check to enforce this also doesn't
allow to launch an apply worker if it gets restarted.
This code was introduced by commit de43897122 but we caught the problem
only with the test added by recent commit c91f71b9dc which started failing
occasionally in the buildfarm.
As per buildfarm.
Diagnosed-by: Amit Kapila, Masahiko Sawada, Tomas Vondra
Author: Amit Kapila
Backpatch-through: 10
Discussion: https://postgr.es/m/CAH2L28vddB_NFdRVpuyRBJEBWjz4BSyTB=_ektNRH8NJ1jf95g@mail.gmail.com
https://postgr.es/m/f90d2b03-4462-ce95-a524-d91464e797c8@enterprisedb.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Don't try to look at the attidentity field of system attributes,
because they're not there in the TupleDescAttr array. Sometimes
this is harmless because we accidentally pick up a zero, but
otherwise we'll report "no owned sequence found" from an attempt
to alter a system attribute. (It seems possible that a SIGSEGV
could occur, too, though I've not seen it in testing.)
It's not in this function's charter to complain that you can't
alter a system column, so instead just hard-wire an assumption
that system attributes aren't identities. I didn't bother with
a regression test because the appearance of the bug is very
erratic.
Per bug #17465 from Roman Zharkov. Back-patch to all supported
branches. (There's not actually a live bug before v12, because
before that get_attidentity() did the right thing anyway.
But for consistency I changed the test in the older branches too.)
Discussion: https://postgr.es/m/17465-f2a554a6cb5740d3@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This test, introduced in df86e52, uses a second standby to check that
it is able to remove correctly RECOVERYHISTORY and RECOVERYXLOG at the
end of recovery. This standby uses the archives of the primary to
restore its contents, with some of the archive's contents coming from
the first standby previously promoted. In slow environments, it was
possible that the test did not check what it should, as the history file
generated by the promotion of the first standby may not be stored yet on
the archives the second standby feeds on. So, it could be possible that
the second standby selects an incorrect timeline, without restoring a
history file at all.
This commits adds a wait phase to make sure that the history file
required by the second standby is archived before this cluster is
created. This relies on poll_query_until() with pg_stat_file() and an
absolute path, something not supported in REL_10_STABLE.
While on it, this adds a new test to check that the history file has
been restored by looking at the logs of the second standby. This
ensures that a RECOVERYHISTORY, whose removal needs to be checked,
is created in the first place. This should make the test more robust.
This test has been introduced by df86e52, but it came in light as an
effect of the bug fixed by acf1dd42, where the extra restore_command
calls made the test much slower.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/YlT23IvsXkGuLzFi@paquier.xyz
Backpatch-through: 11
|
| |
|
|
|
|
| |
The target failed, tested $PATH binaries, or tested a stale temporary
installation. Commit c66b438db62748000700c9b90b585e756dd54141 missed
this. Back-patch to v10 (all supported versions).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The back-patch of commit bbace5697df12398e87ffd9879171c39d27f5b33 had
the unfortunate effect of changing the layout of PGPROC in the
back-branches, which could break extensions. This happened because it
changed the delayChkpt from type bool to type int. So, change it back,
and add a new bool delayChkptEnd field instead. The new field should
fall within what used to be padding space within the struct, and so
hopefully won't cause any extensions to break.
Per report from Markus Wanner and discussion with Tom Lane and others.
Patch originally by me, somewhat revised by Markus Wanner per a
suggestion from Michael Paquier. A very similar patch was developed
by Kyotaro Horiguchi, but I failed to see the email in which that was
posted before writing one of my own.
Discussion: http://postgr.es/m/CA+Tgmoao-kUD9c5nG5sub3F7tbo39+cdr8jKaOVEs_1aBWcJ3Q@mail.gmail.com
Discussion: http://postgr.es/m/20220406.164521.17171257901083417.horikyota.ntt@gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
heap_fetch() used to have a "keep_buf" parameter that told it to return
ownership of the buffer pin to the caller after finding that the
requested tuple TID exists but is invisible to the specified snapshot.
This was thoughtlessly removed in commit 5db6df0c0, which broke
heapam_tuple_lock() (formerly EvalPlanQualFetch) because that function
needs to do more accesses to the tuple even if it's invisible. The net
effect is that we would continue to touch the page for a microsecond or
two after releasing pin on the buffer. Usually no harm would result;
but if a different session decided to defragment the page concurrently,
we could see garbage data and mistakenly conclude that there's no newer
tuple version to chain up to. (It's hard to say whether this has
happened in the field. The bug was actually found thanks to a later
change that allowed valgrind to detect accesses to non-pinned buffers.)
The most reasonable way to fix this is to reintroduce keep_buf,
although I made it behave slightly differently: buffer ownership
is passed back only if there is a valid tuple at the requested TID.
In HEAD, we can just add the parameter back to heap_fetch().
To avoid an API break in the back branches, introduce an additional
function heap_fetch_extended() in those branches.
In HEAD there is an additional, less obvious API change: tuple->t_data
will be set to NULL in all cases where buffer ownership is not returned,
in particular when the tuple exists but fails the time qual (and
!keep_buf). This is to defend against any other callers attempting to
access non-pinned buffers. We concluded that making that change in back
branches would be more likely to introduce problems than cure any.
In passing, remove a comment about heap_fetch that was obsoleted by
9a8ee1dc6.
Per bug #17462 from Daniil Anisimov. Back-patch to v12 where the bug
was introduced.
Discussion: https://postgr.es/m/17462-9c98a0f00df9bd36@postgresql.org
|
| |
|
|
|
|
|
| |
With asserts disabled, late-model clang notices that this variable
is incremented but never otherwise read.
Discussion: https://postgr.es/m/3171401.1649275153@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's possible for the query that "waits for restart" to complete a
successful iteration before the postmaster has noticed its SIGKILL'd
child and begun the restart cycle. (This is a bit hard to believe
perhaps, but it's been seen at least twice in the buildfarm, mainly
on ancient platforms that likely have quirky schedulers.)
To provide a more secure interlock, wait for the other session
we're using to report that it's been forcibly shut down.
Patch by me, based on a suggestion from Andres Freund.
Back-patch to v14 where this test case came in.
Discussion: https://postgr.es/m/1801850.1649047827@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The expected backend message after SIGQUIT changed in commit
7e784d1dc, but we missed updating this test case. Also, experience
shows that we might sometimes get "could not send data to server"
instead of either of the libpq messages the test is looking for.
Per report from Mark Dilger. Back-patch to v14 where the
backend message changed.
Discussion: https://postgr.es/m/17BD82D7-49AC-40C9-8204-E7ADD30321A0@enterprisedb.com
|
| |
|
|
| |
accidentally left behind by 4cb658af70027c3544fb843d77b2e84028762747
|
| |
|
|
|
|
|
|
| |
Do not add OpenSSL dependencies to libpq pkg-config file if OpenSSL is
not enabled. Oversight in beff361bc1edc24ee5f8b2073a1e5e4c92ea66eb.
Author: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/20220331163759.32665-1-fontaine.fabrice%40gmail.com
|
| |
|
|
|
|
|
| |
Oversight in commit a59c79564. Back-patch, as that was.
Noted by Peter Eisentraut.
Discussion: https://postgr.es/m/7f85ef6d-250b-f5ec-9867-89f0b16d019f@enterprisedb.com
|
| | |
|
| |
|
|
|
|
|
| |
This reverts commit 49d9cfc68bf4. The approach taken by this patch has
problems, so we'll come up with a radically different fix.
Discussion: https://postgr.es/m/CA+TgmoYcUPL+WOJL2ZzhH=zmrhj0iOQ=iCFM0SuYqBbqZEamEg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
| |
pg_stat_get_replication_slot() accidentally was marked as non-strict, crashing
when called with NULL input. As it's already released, introduce an explicit
NULL check in 14, fix the catalog in HEAD.
Bumps catversion in HEAD.
Discussion: https://postgr.es/m/20220326212432.s5n2maw6kugnpyxw@alap3.anarazel.de
Backpatch: 14-, where replication slot stats were introduced
|
| |
|
|
|
|
|
|
|
|
|
|
| |
After closedir() dirent->d_name is not valid anymore. As there alerady are a
few places relying on the limited lifetime of pg_waldump, do so here as well,
and just pg_strdup() the string.
The bug was introduced in fc49e24fa69a.
Found by UBSan, run locally.
Backpatch: 11-, like fc49e24fa69 itself.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 8c6d30f21 caused this function to fail to set *displen
in the PS_USE_NONE code path. If the variable's previous value
had been negative, that'd lead to a memory clobber at some call
sites. We'd managed not to notice due to very thin test coverage
of such configurations, but this appears to explain buildfarm member
lorikeet's recent struggles.
Credit to Andrew Dunstan for spotting the problem. Back-patch
to v13 where the bug was introduced.
Discussion: https://postgr.es/m/136102.1648320427@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
clang 13 with -Wextra warns that "performing pointer subtraction with
a null pointer has undefined behavior" in the places where freepage.c
tries to set a relptr variable to constant NULL. This appears to be
a compiler bug, but it's unlikely to get fixed instantly. Fortunately,
we can work around it by introducing an inline support function, which
seems like a good change anyway because it removes the macro's existing
double-evaluation hazard.
Backpatch to v10 where this code was introduced.
Patch by me, based on an idea of Andres Freund's.
Discussion: https://postgr.es/m/48826.1648310694@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous method for doing that was to write zeroes into a
predetermined set of page locations. However, there's a roughly
1-in-64K chance that the existing checksum will match by chance,
and yesterday several buildfarm animals started to reproducibly
see that, resulting in test failures because no checksum mismatch
was reported.
Since the checksum includes the page LSN, test success depends on
the length of the installation's WAL history, which is affected by
(at least) the initial catalog contents, the set of locales installed
on the system, and the length of the pathname of the test directory.
Sooner or later we were going to hit a chance match, and today is
that day.
Harden these tests by specifically inverting the checksum field and
leaving all else alone, thereby guaranteeing that the checksum is
incorrect.
In passing, fix places that were using seek() to set up for syswrite(),
a combination that the Perl docs very explicitly warn against. We've
probably escaped problems because no regular buffered I/O is done on
these filehandles; but if it ever breaks, we wouldn't deserve or get
much sympathy.
Although we've only seen problems in HEAD, now that we recognize the
environmental dependencies it seems like it might be just a matter
of time until someone manages to hit this in back-branch testing.
Hence, back-patch to v11 where we started doing this kind of test.
Discussion: https://postgr.es/m/3192026.1648185780@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Crash recovery on standby may encounter missing directories when
replaying create database WAL records. Prior to this patch, the standby
would fail to recover in such a case. However, the directories could be
legitimately missing. Consider a sequence of WAL records as follows:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the tablespace
directory, the standby crashes and has to replay the create database
record again, the crash recovery must be able to move on.
This patch adds a mechanism similar to invalid-page tracking, to keep a
tally of missing directories during crash recovery. If all the missing
directory references are matched with corresponding drop records at the
end of crash recovery, the standby can safely continue following the
primary.
Backpatch to 13, at least for now. The bug is older, but fixing it in
older branches requires more careful study of the interactions with
commit e6d8069522c8, which appeared in 13.
A new TAP test file is added to verify the condition. However, because
it depends on commit d6d317dbf615, it can only be added to branch
master. I (Álvaro) manually verified that the code behaves as expected
in branch 14. It's a bit nervous-making to leave the code uncovered by
tests in older branches, but leaving the bug unfixed is even worse.
Also, the main reason this fix took so long is precisely that we
couldn't agree on a good strategy to approach testing for the bug, so
perhaps this is the best we can do.
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Author: Paul Guo <paulguo@gmail.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If TRUNCATE causes some buffers to be invalidated and thus the
checkpoint does not flush them, TRUNCATE must also ensure that the
corresponding files are truncated on disk. Otherwise, a replay
from the checkpoint might find that the buffers exist but have
the wrong contents, which may cause replay to fail.
Report by Teja Mupparti. Patch by Kyotaro Horiguchi, per a design
suggestion from Heikki Linnakangas, with some changes to the
comments by me. Review of this and a prior patch that approached
the issue differently by Heikki Linnakangas, Andres Freund, Álvaro
Herrera, Masahiko Sawada, and Tom Lane.
Discussion: http://postgr.es/m/BYAPR06MB6373BF50B469CA393C614257ABF00@BYAPR06MB6373.namprd06.prod.outlook.com
|
| |
|
|
|
|
|
|
|
|
|
| |
Noticed via -fsanitize=undefined. Introduced when a few columns in
GetConfigOptionByNum() / pg_settings started to be translated in 72be8c29a /
PG 12.
Backpatch to all affected branches, for the same reasons as 46ab07ffda9.
Discussion: https://postgr.es/m/20220323173537.ll7klrglnp4gn2um@alap3.anarazel.de
Backpatch: 12-
|
| |
|
|
|
|
|
|
|
| |
Noticed via -fsanitize=undefined.
Backpatch to all branches, for the same reasons as 46ab07ffda9.
Discussion: https://postgr.es/m/20220323173537.ll7klrglnp4gn2um@alap3.anarazel.de
Backpatch: 10-
|
| |
|
|
|
|
|
|
|
| |
It seems possible for the condition being tested to be true in
production, and nobody would never know (except when some data
eventually becomes corrupt?).
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m//202109040001.zky3wgv2qeqg@alvherre.pgsql
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Invalidate abortedRecPtr and missingContrecPtr after a missing
continuation record is successfully skipped on a standby. This fixes a
PANIC caused when a recently promoted standby attempts to write an
OVERWRITE_RECORD with an LSN of the previously read aborted record.
Backpatch to 10 (all stable versions).
Author: Sami Imseih <simseih@amazon.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/44D259DE-7542-49C4-8A52-2AB01534DCA9@amazon.com
|
| |
|
|
|
|
|
|
|
| |
As commits b700f96c and 3414099c did for the reloptions test, make
sure VACUUM can always truncate the table as expected.
Back-patch to 12, where vacuum_truncate arrived.
Discussion: https://postgr.es/m/CAD21AoCNoWjYkdEtr%2BVDoF9v__V905AedKZ9iF%3DArgCtrbxZqw%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
When cross-building to windows, or building with mingw on windows, the build
could fail with
x86_64-w64-mingw32-gcc: error: win32ver.o: No such file or director
because pg_dumpall didn't depend on WIN32RES, but it's recipe references
it. The build nevertheless succeeded most of the time, due to
pg_dump/pg_restore having the required dependency, causing win32ver.o to be
built.
Reported-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGJeekpUPWW6yCVdf9=oBAcCp86RrBivo4Y4cwazAzGPng@mail.gmail.com
Backpatch: 10-, omission present on all live branches
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This issue is environment-sensitive, where the SSL tests could fail in
various way by feeding on defaults provided by sslcert, sslkey,
sslrootkey, sslrootcert, sslcrl and sslcrldir coming from a local setup,
as of ~/.postgresql/ by default. Horiguchi-san has reported two
failures, but more advanced testing from me (aka inclusion of garbage
SSL configuration in ~/.postgresql/ for all the configuration
parameters) has showed dozens of failures that can be triggered in the
whole test suite.
History has showed that we are not good when it comes to address such
issues, fixing them locally like in dd87799, and such problems keep
appearing. This commit strengthens the entire test suite to put an end
to this set of problems by embedding invalid default values in all the
connection strings used in the tests. The invalid values are prefixed
in each connection string, relying on the follow-up values passed in the
connection string to enforce any invalid value previously set. Note
that two tests related to CRLs are required to fail with certain pre-set
configurations, but we can rely on enforcing an empty value instead
after the invalid set of values.
Reported-by: Kyotaro Horiguchi
Reviewed-by: Andrew Dunstan, Daniel Gustafsson, Kyotaro Horiguchi
Discussion: https://postgr.es/m/20220316.163658.1122740600489097632.horikyota.ntt@gmail.com
backpatch-through: 10
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The planner needs to treat GroupingFunc like Aggref for many purposes,
in particular with respect to processing of the argument expressions,
which are not to be evaluated at runtime. A few places hadn't gotten
that memo, notably including subselect.c's processing of outer-level
aggregates. This resulted in assertion failures or wrong plans for
cases in which a GROUPING() construct references an outer aggregation
level.
Also fix missing special cases for GroupingFunc in cost_qual_eval
(resulting in wrong cost estimates for GROUPING(), although it's
not clear that that would affect plan shapes in practice) and in
ruleutils.c (resulting in excess parentheses in pretty-print mode).
Per bug #17088 from Yaoguang Chen. Back-patch to all supported
branches.
Richard Guo, Tom Lane
Discussion: https://postgr.es/m/17088-e33882b387de7f5c@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
DROP INDEX needs to lock the index's table before the index itself,
else it will deadlock against ordinary queries that acquire the
relation locks in that order. This is correctly mechanized for
plain indexes by RangeVarCallbackForDropRelation; but in the case of
a partitioned index, we neglected to lock the child tables in advance
of locking the child indexes. We can fix that by traversing the
inheritance tree and acquiring the needed locks in RemoveRelations,
after we have acquired our locks on the parent partitioned table and
index.
While at it, do some refactoring to eliminate confusion between
the actual and expected relkind in RangeVarCallbackForDropRelation.
We can save a couple of syscache lookups too, by having that function
pass back info that RemoveRelations will need.
Back-patch to v11 where partitioned indexes were added.
Jimmy Yih, Gaurab Dey, Tom Lane
Discussion: https://postgr.es/m/BYAPR05MB645402330042E17D91A70C12BD5F9@BYAPR05MB6454.namprd05.prod.outlook.com
|
| |
|
|
|
|
|
|
|
|
|
| |
The output of table_to_xmlschema() and allied functions includes
a regex describing valid values for these types ... but the regex
was itself invalid, as it failed to escape a literal "+" sign.
Report and fix by Renan Soares Lopes. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/7f6fabaa-3f8f-49ab-89ca-59fbfe633105@me.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit bf7ca1587, I had the bright idea that we could make the
result of a whole-row Var (that is, foo.*) track any column aliases
that had been applied to the FROM entry the Var refers to. However,
that's not terribly logically consistent, because now the output of
the Var is no longer of the named composite type that the Var claims
to emit. bf7ca1587 tried to handle that by changing the output
tuple values to be labeled with a blessed RECORD type, but that's
really pretty disastrous: we can wind up storing such tuples onto
disk, whereupon they're not readable by other sessions.
The only practical fix I can see is to give up on what bf7ca1587
tried to do, and say that the column names of tuples produced by
a whole-row Var are always those of the underlying named composite
type, query aliases or no. While this introduces some inconsistencies,
it removes others, so it's not that awful in the abstract. What *is*
kind of awful is to make such a behavioral change in a back-patched
bug fix. But corrupt data is worse, so back-patched it will be.
(A workaround available to anyone who's unhappy about this is to
introduce an extra level of sub-SELECT, so that the whole-row Var is
referring to the sub-SELECT's output and not to a named table type.
Then the Var is of type RECORD to begin with and there's no issue.)
Per report from Miles Delahunty. The faulty commit dates to 9.5,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/2950001.1638729947@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 83fd4532a7 allowed publishing of changes via ancestors, for
publications defined with publish_via_partition_root. But the way
the ancestor was determined in get_rel_sync_entry() was incorrect,
simply updating the same variable. So with multiple publications,
replicating different ancestors, the outcome depended on the order
of publications in the list - the value from the last loop was used,
even if it wasn't the top-most ancestor.
This is a probably rare situation, as in most cases publications do
not overlap, so each partition has exactly one candidate ancestor
to replicate as and there's no ambiguity.
Fixed by tracking the "ancestor level" for each publication, and
picking the top-most ancestor. Adds a test case, verifying the
correct ancestor is used for publishing the changes and that this
does not depend on order of publications in the list.
Older releases have another bug in this loop - once all actions are
replicated, the loop is terminated, on the assumption that inspecting
additional publications is unecessary. But that misses the fact that
those additional applications may replicate different ancestors.
Fixed by removal of this break condition. We might still terminate the
loop in some cases (e.g. when replicating all actions and the ancestor
is the partition root).
Backpatch to 13, where publish_via_partition_root was introduced.
Initial report and fix by me, test added by Hou zj. Reviews and
improvements by Amit Kapila.
Author: Tomas Vondra, Hou zj, Amit Kapila
Reviewed-by: Amit Kapila, Hou zj
Discussion: https://postgr.es/m/d26d24dd-2fab-3c48-0162-2b7f84a9c893%40enterprisedb.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commands like ALTER TABLE SET TABLESPACE may leave files for the next
checkpoint to clean up. If such files are not removed by the time DROP
TABLESPACE is called, we request a checkpoint so that they are deleted.
However, there is presently a window before checkpoint start where new
unlink requests won't be scheduled until the following checkpoint. This
means that the checkpoint forced by DROP TABLESPACE might not remove the
files we expect it to remove, and the following ERROR will be emitted:
ERROR: tablespace "mytblspc" is not empty
To fix, add a call to AbsorbSyncRequests() just before advancing the
unlink cycle counter. This ensures that any unlink requests forwarded
prior to checkpoint start (i.e., when ckpt_started is incremented) will
be processed by the current checkpoint. Since AbsorbSyncRequests()
performs memory allocations, it cannot be called within a critical
section, so we also need to move SyncPreCheckpoint() to before
CreateCheckPoint()'s critical section.
This is an old bug, so back-patch to all supported versions.
Author: Nathan Bossart <nathandbossart@gmail.com>
Reported-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220215235845.GA2665318%40nathanxps13
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If we run out of space in the checkpointer sync request queue (which is
hopefully rare on real systems, but common with very small buffer pool),
we wait for it to drain. While waiting, we should report that as a wait
event so that users know what is going on, and also handle postmaster
death, since otherwise the loop might never terminate if the
checkpointer has exited.
Back-patch to 12. Although the problem exists in earlier releases too,
the code is structured differently before 12 so I haven't gone any
further for now, in the absence of field complaints.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220226213942.nb7uvb2pamyu26dj%40alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The checkpointer shouldn't ignore its latch. Other backends may be
waiting for it to drain the request queue. Hopefully real systems don't
have a full queue often, but the condition is reached easily when
shared_buffers is small.
This involves defining a new wait event, which will appear in the
pg_stat_activity view often due to spread checkpoints.
Back-patch only to 14. Even though the problem exists in earlier
branches too, it's hard to hit there. In 14 we stopped using signal
handlers for latches on Linux, *BSD and macOS, which were previously
hiding this problem by interrupting the sleep (though not reliably, as
the signal could arrive before the sleep begins; precisely the problem
latches address).
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220226213942.nb7uvb2pamyu26dj%40alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
| |
Since LLVM 14 has stopped changing and is about to be released,
back-patch the following changes from the master branch:
e6a7600202105919bffd62b3dfd941f4a94e082b
807fee1a39de6bb8184082012e643951abb9ad1d
a56e7b66010f330782243de9e25ac2a6596be0e1
Back-patch to 11, where LLVM JIT support came in.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 8b069ef5d changed this function to look at pg_constraint.conindid
rather than searching pg_depend. That was a good performance improvement,
but it failed to preserve the exact semantics. The old code would only
return an index that was "owned by" (internally dependent on) the
specified constraint, whereas the new code will also return indexes that
are just referenced by foreign key constraints. This confuses ALTER
TABLE, which was implicitly expecting the previous semantics, into
failing with errors like
ERROR: relation 146621 has multiple clustered indexes
or
ERROR: "pk_attbl" is not an index for table "atref"
We can fix this without reverting the performance improvement by adding
a contype check in get_constraint_index(). Another way could be to
make ALTER TABLE check it, but I'm worried that extension code could
also have subtle dependencies on the old semantics.
Tom Lane and Japin Li, per bug #17409 from Holly Roberts.
Back-patch to v14 where the error crept in.
Discussion: https://postgr.es/m/17409-52871dda8b5741cb@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Slow hosts may avoid load-induced, spurious failures by setting
environment variable PG_TEST_TIMEOUT_DEFAULT to some number of seconds
greater than 180. Developers may see faster failures by setting that
environment variable to some lesser number of seconds. In tests, write
$PostgreSQL::Test::Utils::timeout_default wherever the convention has
been to write 180. This change raises the default for some briefer
timeouts. Back-patch to v10 (all supported versions).
Discussion: https://postgr.es/m/20220218052842.GA3627003@rfd.leadboat.com
|
| |
|
|
|
|
|
|
|
|
|
|
| |
pg_regress reported "Unix socket" as the default location whenever
HAVE_UNIX_SOCKETS is defined. However, that's not been accurate
on Windows since 8f3ec75de. Update this logic to match what libpq
actually does now.
This is just cosmetic, but still it's potentially misleading.
Back-patch to v13 where 8f3ec75de came in.
Discussion: https://postgr.es/m/3894060.1646415641@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This macro cast the result to BlockNumber after shifting, not before,
which is the wrong thing. Per the C spec, the uint16 fields would
promote to int not unsigned int, so that (for 32-bit int) the shift
potentially shifts a nonzero bit into the sign position. I doubt
there are any production systems where this would actually end with
the wrong answer, but it is undefined behavior per the C spec, and
clang's -fsanitize=undefined option reputedly warns about it on some
platforms. (I can't reproduce that right now, but the code is
undeniably wrong per spec.) It's easy to fix by casting to
BlockNumber (uint32) in the proper places.
It's been wrong for ages, so back-patch to all supported branches.
Report and patch by Zhihong Yu (cosmetic tweaking by me)
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Most of these are cases where we could call memcpy() or other libc
functions with a NULL pointer and a zero count, which is forbidden
by POSIX even though every production version of libc allows it.
We've fixed such things before in a piecemeal way, but apparently
never made an effort to try to get them all. I don't claim that
this patch does so either, but it gets every failure I observe in
check-world, using clang 12.0.1 on current RHEL8.
numeric.c has a different issue that the sanitizer doesn't like:
"ln(-1.0)" will compute log10(0) and then try to assign the
resulting -Inf to an integer variable. We don't actually use the
result in such a case, so there's no live bug.
Back-patch to all supported branches, with the idea that we might
start running a buildfarm member that tests this case. This includes
back-patching c1132aae3 (Check the size in COPY_POINTER_FIELD),
which previously silenced some of these issues in copyfuncs.c.
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change makes libpq apply the same private-key-file ownership
and permissions checks that we have used in the backend since commit
9a83564c5. Namely, that the private key can be owned by either the
current user or root (with different file permissions allowed in the
two cases). This allows system-wide management of key files, which
is just as sensible on the client side as the server, particularly
when the client is itself some application daemon.
Sync the comments about this between libpq and the backend, too.
Back-patch of a59c79564 and 50f03473e into all supported branches.
David Steele
Discussion: https://postgr.es/m/f4b7bc55-97ac-9e69-7398-335e212f7743@pgmasters.net
|
