| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rather than passing around DumpOptions and RestoreOptions as separate
arguments, add fields to struct Archive to carry pointers to these objects,
and access them through those fields when needed. There already was a
RestoreOptions pointer in Archive, though for no obvious reason it was part
of the "private" struct rather than out where pg_dump.c could see it.
Doing this allows reversion of quite a lot of parameter-addition changes
made in commit 0eea8047bf, which is a good thing IMO because this will
reduce the code delta between 9.4 and 9.5, probably easing a few future
back-patch efforts. Moreover, the previous commit only added a DumpOptions
argument to functions that had to have it at the time, which means we could
anticipate still more code churn (and more back-patch hazard) as the
requirement spread further. I'd hit exactly that problem in my upcoming
patch to fix extension membership marking, which is what motivated me to
do this.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 803716013dc1350f installed a safeguard against loading plpython2
and plpython3 at the same time, but asserted that both could still be
used in the same database, just not in the same session. However, that's
not actually all that practical because dumping and reloading will fail
(since both libraries necessarily get loaded into the restoring session).
pg_upgrade is even worse, because it checks for missing libraries by
loading every .so library mentioned in the entire installation into one
session, so that you can have only one across the whole cluster.
We can improve matters by not throwing the error immediately in _PG_init,
but only when and if we're asked to do something that requires calling
into libpython. This ameliorates both of the above situations, since
while execution of CREATE LANGUAGE, CREATE FUNCTION, etc will result in
loading plpython, it isn't asked to do anything interesting (at least
not if check_function_bodies is off, as it will be during a restore).
It's possible that this opens some corner-case holes in which a crash
could be provoked with sufficient effort. However, since plpython
only exists as an untrusted language, any such crash would require
superuser privileges, making it "don't do that" not a security issue.
To reduce the hazards in this area, the error is still FATAL when it
does get thrown.
Per a report from Paul Jones. Back-patch to 9.2, which is as far back
as the patch applies without work. (It could be made to work in 9.1,
but given the lack of previous complaints, I'm disinclined to expend
effort so far back. We've been pretty desultory about support for
Python 3 in 9.1 anyway.)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This loop uselessly fetched the argument after the one it's currently
looking at. No real harm is done since we couldn't possibly fetch off
the end of memory, but it's confusing to the reader.
Also remove a duplicate (and therefore confusing) PG_ARGISNULL check in
jsonb_build_object.
I happened to notice these things while trolling for missed null-arg
checks earlier today. Back-patch to 9.5, not because there is any
real bug, but just because 9.5 and HEAD are still in sync in this
file and we might as well keep them so.
In passing, re-pgindent.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A scan for missed proisstrict markings in the core code turned up
these functions:
brin_summarize_new_values
pg_stat_reset_single_table_counters
pg_stat_reset_single_function_counters
pg_create_logical_replication_slot
pg_create_physical_replication_slot
pg_drop_replication_slot
The first three of these take OID, so a null argument will normally look
like a zero to them, resulting in "ERROR: could not open relation with OID
0" for brin_summarize_new_values, and no action for the pg_stat_reset_XXX
functions. The other three will dump core on a null argument, though this
is mitigated by the fact that they won't do so until after checking that
the caller is superuser or has rolreplication privilege.
In addition, the pg_logical_slot_get/peek[_binary]_changes family was
intentionally marked nonstrict, but failed to make nullness checks on all
the arguments; so again a null-pointer-dereference crash is possible but
only for superusers and rolreplication users.
Add the missing ARGISNULL checks to the latter functions, and mark the
former functions as strict in pg_proc. Make that change in the back
branches too, even though we can't force initdb there, just so that
installations initdb'd in future won't have the issue. Since none of these
bugs rise to the level of security issues (and indeed the pg_stat_reset_XXX
functions hardly misbehave at all), it seems sufficient to do this.
In addition, fix some order-of-operations oddities in the slot_get_changes
family, mostly cosmetic, but not the part that moves the function's last
few operations into the PG_TRY block. As it stood, there was significant
risk for an error to exit without clearing historical information from
the system caches.
The slot_get_changes bugs go back to 9.4 where that code was introduced.
Back-patch appropriate subsets of the pg_proc changes into all active
branches, as well.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Given syntactically wrong input, widget_in() could call atof() with an
indeterminate pointer argument, typically leading to a crash; or if it
didn't do that, it might return a NULL pointer, which again would lead
to a crash since old-style C functions aren't supposed to do things
that way. Fix that by correcting the off-by-one syntax test and
throwing a proper error rather than just returning NULL.
Also, since widget_in and widget_out have been marked STRICT for a
long time, their tests for null inputs are just dead code; remove 'em.
In the oldest branches, also improve widget_out to use snprintf not
sprintf, just to be sure.
In passing, get rid of a long-since-useless sprintf into a local buffer
that nothing further is done with, and make some other minor coding
style cleanups.
In the intended regression-testing usage of these functions, none of
this is very significant; but if the regression test database were
left around in a production installation, these bugs could amount
to a minor security hazard.
Piotr Stefaniak, Michael Paquier, and Tom Lane
|
| |
|
|
|
|
|
|
|
|
| |
These functions readily crash when passed a NULL input value. The tests
themselves do not pass NULL values to them; but when the regression
database is used as a basis for fuzz testing, they cause a lot of noise.
Also, if someone were to leave a regression database lying about in a
production installation, these would create a minor security hazard.
Andreas Seltenreich
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The error message wording for AttributeError has changed in Python 3.5.
For the plpython_error test, add a new expected file. In the
plpython_subtransaction test, we didn't really care what the exception
is, only that it is something coming from Python. So use a generic
exception instead, which has a message that doesn't vary across
versions.
Back-patch of commit f16d52269a196f7f303abe3b978d95ade265f05f, which
was previously back-patched into 9.2-9.4, but missed 9.5.
|
| |
|
|
| |
Tatsuro Yamada
|
| |
|
|
|
|
|
|
|
| |
Turns out the only reason initdb -X worked is that pg_mkdir_p won't
whine if you point it at something that's a symlink to a directory.
Otherwise, the attempt to create pg_xlog/ just like all the other
subdirectories would have failed. Let's be a little more explicit
about what's happening. Oversight in my patch for bug #13853
(mea culpa for not testing -X ...)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
When we're creating subdirectories of PGDATA during initdb, we know darn
well that the parent directory exists (or should exist) and that the new
subdirectory doesn't (or shouldn't). There is therefore no need to use
anything more complicated than mkdir(). Using pg_mkdir_p() just opens us
up to unexpected failure modes, such as the one exhibited in bug #13853
from Nuri Boardman. It's not very clear why pg_mkdir_p() went wrong there,
but it is clear that we didn't need to be trying to create parent
directories in the first place. We're not even saving any code, as proven
by the fact that this patch nets out at minus five lines.
Since this is a response to a field bug report, back-patch to all branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
pg_ctl is using isatty() to verify whether the process is running in a
terminal, and if not it sends its output to Windows' Event Log ... which
does the wrong thing when the output has been redirected to a pipe, as
reported in bug #13592.
To fix, make pg_ctl use the code we already have to detect service-ness:
in the master branch, move src/backend/port/win32/security.c to src/port
(with suitable tweaks so that it runs properly in backend and frontend
environments); pg_ctl already has access to pgport so it Just Works. In
older branches, that's likely to cause trouble, so instead duplicate the
required code in pg_ctl.c.
Author: Michael Paquier
Bug report and diagnosis: Egon Kocjan
Backpatch: all supported branches
|
| |
|
|
|
|
|
|
| |
The order of inclusion of .o files makes a difference in linker output;
not a functional difference, but still a bitwise difference, which annoys
some packagers who would like reproducible builds.
Report and patch by Christoph Berg
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A pointless and confusing error message is shown to the user when
attempting to identify a 9.3 or older remote server with a 9.5/9.6
pg_receivexlog, because the return signature of IDENTIFY_SYSTEM was
changed in 9.4. There's no good reason for the warning message, so
shuffle code around to keep it quiet.
(pg_recvlogical is also affected by this commit, but since it obviously
cannot work with 9.3 that doesn't actually matter much.)
Backpatch to 9.5.
Reported by Marco Nenciarini, who also wrote the initial patch. Further
tweaked by Robert Haas and Fujii Masao; reviewed by Michael Paquier and
Craig Ringer.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some time back we agreed that row_security=off should not be a way to
bypass RLS entirely, but only a way to get an error if it was being
applied. However, the code failed to act that way for table owners.
Per discussion, this is a must-fix bug for 9.5.0.
Adjust the logic in rls.c to behave as expected; also, modify the
error message to be more consistent with the new interpretation.
The regression tests need minor corrections as well. Also update
the comments about row_security in ddl.sgml to be correct. (The
official description of the GUC in config.sgml is already correct.)
I failed to resist the temptation to do some other very minor
cleanup as well, such as getting rid of a duplicate extern declaration.
|
| |
|
|
| |
Masahiko Sawada
|
| |
|
|
|
| |
Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 3b0ccc27cf917446ea0a6c680b70534cfcaba81e
|
| |
|
|
| |
We discussed this but somehow failed to implement it...
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Aside from any consistency arguments, this is logically necessary because
the I/O functions for these types also handle numeric OID values. Without
a quoting rule it is impossible to distinguish numeric OIDs from role or
namespace names that happen to contain only digits.
Also change the to_regrole and to_regnamespace functions to dequote their
arguments. While not logically essential, this seems like a good idea
since the other to_reg* functions do it. Anyone who really wants raw
lookup of an uninterpreted name can fall back on the time-honored solution
of (SELECT oid FROM pg_namespace WHERE nspname = whatever).
Report and patch by Jim Nasby, reviewed by Michael Paquier
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Can't release the AccessExclusiveLock on the target table until commit.
Otherwise there is a race condition whereby other backends might service
our cache invalidation signals before they can actually see the updated
catalog rows.
Just to add insult to injury, RemovePolicyById was closing the rel (with
incorrect lock drop) and then passing the now-dangling rel pointer to
CacheInvalidateRelcache. Probably the reason this doesn't fall over on
CLOBBER_CACHE buildfarm members is that some outer level of the DROP logic
is still holding the rel open ... but it'd have bit us on the arse
eventually, no doubt.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The CHECK_IS_BINARY_UPGRADE macro is not sufficient security protection
if we're going to dereference pass-by-reference arguments before it.
But in any case we really need to explicitly check PG_ARGISNULL for all
the arguments of a non-strict function, not only the ones we expect null
values for.
Oversight in commits 30982be4e5019684e1772dd9170aaa53f5a8e894 and
f92fc4c95ddcc25978354a8248d3df22269201bc. Found by Andreas Seltenreich.
(The other usages in pg_upgrade_support.c seem safe.)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
pgwin32_recv() has treated a non-error return of zero bytes from WSARecv()
as being a reason to block ever since the current implementation was
introduced in commit a4c40f140d23cefb. However, so far as one can tell
from Microsoft's documentation, that is just wrong: what it means is
graceful connection closure (in stream protocols) or receipt of a
zero-length message (in message protocols), and neither case should result
in blocking here. The only reason the code worked at all was that control
then fell into the retry loop, which did *not* treat zero bytes specially,
so we'd get out after only wasting some cycles. But as of 9.5 we do not
normally reach the retry loop and so the bug is exposed, as reported by
Shay Rojansky and diagnosed by Andres Freund.
Remove the unnecessary test on the byte count, and rearrange the code
in the retry loop so that it looks identical to the initial sequence.
Back-patch to 9.5. The code is wrong all the way back, AFAICS, but
since it's relatively harmless in earlier branches we'll leave it alone.
|
| |
|
|
|
|
|
| |
Commit c7e27becd2e6eb93 fixed this on the backend side, but we neglected
the fact that several code paths in pg_dump were printing reloptions
values that had not gotten massaged by ruleutils. Apply essentially the
same quoting logic in those places, too.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
spg_text_inner_consistent is capable of reconstructing an empty string
to pass down to the next index level; this happens if we have an empty
string coming in, no prefix, and a dummy node label. (In practice, what
is needed to trigger that is insertion of a whole bunch of empty-string
values.) Then, we will arrive at the next level with in->level == 0
and a non-NULL (but zero length) in->reconstructedValue, which is valid
but the Assert tests weren't expecting it.
Per report from Andreas Seltenreich. This has no impact in non-Assert
builds, so should not be a problem in production, but back-patch to
all affected branches anyway.
In passing, remove a couple of useless variable initializations and
shorten the code by not duplicating DatumGetPointer() calls.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
flatten_reloptions() supposed that it didn't really need to do anything
beyond inserting commas between reloption array elements. However, in
principle the value of a reloption could be nearly anything, since the
grammar allows a quoted string there. Any restrictions on it would come
from validity checking appropriate to the particular option, if any.
A reloption value that isn't a simple identifier or number could thus lead
to dump/reload failures due to syntax errors in CREATE statements issued
by pg_dump. We've gotten away with not worrying about this so far with
the core-supported reloptions, but extensions might allow reloption values
that cause trouble, as in bug #13840 from Kouhei Sutou.
To fix, split the reloption array elements explicitly, and then convert
any value that doesn't look like a safe identifier to a string literal.
(The details of the quoting rule could be debated, but this way is safe
and requires little code.) While we're at it, also quote reloption names
if they're not safe identifiers; that may not be a likely problem in the
field, but we might as well try to be bulletproof here.
It's been like this for a long time, so back-patch to all supported
branches.
Kouhei Sutou, adjusted some by me
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A report from Andy Colson showed that gincostestimate() was not being
nearly paranoid enough about whether to believe the statistics it finds in
the index metapage. The problem is that the metapage stats (other than the
pending-pages count) are only updated by VACUUM, and in the worst case
could still reflect the index's original empty state even when it has grown
to many entries. We attempted to deal with that by scaling up the stats to
match the current index size, but if nEntries is zero then scaling it up
still gives zero. Moreover, the proportion of pages that are entry pages
vs. data pages vs. pending pages is unlikely to be estimated very well by
scaling if the index is now orders of magnitude larger than before.
We can improve matters by expanding the use of the rule-of-thumb estimates
I introduced in commit 7fb008c5ee59b040: if the index has grown by more
than a cutoff amount (here set at 4X growth) since VACUUM, then use the
rule-of-thumb numbers instead of scaling. This might not be exactly right
but it seems much less likely to produce insane estimates.
I also improved both the scaling estimate and the rule-of-thumb estimate
to account for numPendingPages, since it's reasonable to expect that that
is accurate in any case, and certainly pages that are in the pending list
are not either entry or data pages.
As a somewhat separate issue, adjust the estimation equations that are
concerned with extra fetches for partial-match searches. These equations
suppose that a fraction partialEntries / numEntries of the entry and data
pages will be visited as a consequence of a partial-match search. Now,
it's physically impossible for that fraction to exceed one, but our
estimate of partialEntries is mostly bunk, and our estimate of numEntries
isn't exactly gospel either, so we could arrive at a silly value. In the
example presented by Andy we were coming out with a value of 100, leading
to insane cost estimates. Clamp the fraction to one to avoid that.
Like the previous patch, back-patch to all supported branches; this
problem can be demonstrated in one form or another in all of them.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Commit a2e35b53c39b2a27 added an #include of catalog/objectaddress.h to
pg_operator.h, making it impossible for client-side code to #include
pg_operator.h. It's not entirely clear whether any client-side code needs
to include pg_operator.h, but it seems prudent to assume that there is some
such code somewhere. Therefore, split off the function definitions into a
new file pg_operator_fn.h, similarly to what we've done for some other
catalog header files.
Back-patch of part of commit 0dab5ef39b3d9d86.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 6f8cb1e23485bd6d tried to centralize rewriteTargetView's copying
of a target view's Query struct. However, it ignored the fact that the
jointree->quals field was used twice. This only accidentally failed to
fail immediately because the same ChangeVarNodes mutation is applied in
both cases, so that we end up with logically identical expression trees
for both uses (and, as the code stands, the second ChangeVarNodes call
actually does nothing). However, we end up linking *physically*
identical expression trees into both an RTE's securityQuals list and
the WithCheckOption list. That's pretty dangerous, mainly because
prepsecurity.c is utterly cavalier about further munging such structures
without copying them first.
There may be no live bug in HEAD as a consequence of the fact that we apply
preprocess_expression in between here and prepsecurity.c, and that will
make a copy of the tree anyway. Or it may just be that the regression
tests happen to not trip over it. (I noticed this only because things
fell over pretty badly when I tried to relocate the planner's call of
expand_security_quals to before expression preprocessing.) In any case
it's very fragile because if anyone tried to make the securityQuals and
WithCheckOption trees diverge before we reach preprocess_expression, it
would not work. The fact that the current code will preprocess
securityQuals and WithCheckOptions lists at completely different times in
different query levels does nothing to increase my trust that that can't
happen.
In view of the fact that 9.5.0 is almost upon us and the aforesaid commit
has seen exactly zero field testing, the prudent course is to make an extra
copy of the quals so that the behavior is not different from what has been
in the field during beta.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The variables newestCommitTs and oldestCommitTs sound as if they are
timestamps, but in fact they are the transaction Ids that correspond
to the newest and oldest timestamps rather than the actual timestamps.
Rename these variables to reflect that they are actually xids: to wit
newestCommitTsXid and oldestCommitTsXid respectively. Also modify
related code in a similar fashion, particularly the user facing output
emitted by pg_controldata and pg_resetxlog.
Complaint and patch by me, review by Tom Lane and Alvaro Herrera.
Backpatch to 9.5 where these variables were first introduced.
|
| |
|
|
|
|
|
|
|
|
|
| |
For some reason, we've been overlooking the fact that pg_receivexlog
and pg_recvlogical are using wrong translation domains all along,
so their output hasn't ever been translated. The right domain is
pg_basebackup, not their own executable names.
Noticed by Ioseph Kim, who's been working on the Korean translation.
Backpatch pg_receivexlog to 9.2 and pg_recvlogical to 9.4.
|
| |
|
|
|
|
|
|
|
|
| |
brin_summarize_new_values() did not check that the passed OID was for
an index at all, much less that it was a BRIN index, and would fail in
obscure ways if it wasn't (possibly damaging data first?). It also
lacked any permissions test; by analogy to VACUUM, we should only allow
the table's owner to summarize.
Noted by Jeff Janes, fix by Michael Paquier and me
|
| |
|
|
|
|
|
| |
t/002_databases.pl was expecting to see a specific physical order of the
rows in pg_database. I broke that in HEAD with commit 01e386a325549b77,
but I'd say it's a pretty fragile test methodology in any case, so fix
it in 9.5 as well.
|
| |
|
|
| |
Amit Langote, further adjusted by me
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts most of commit 83dec5a71 in favor of having connectDatabase()
store the possibly-reusable password in a static variable, similar to the
coding we've had for a long time in pg_dump's version of that function.
To avoid possible problems with unwanted password reuse, make callers
specify whether it's reasonable to attempt to re-use the password.
This is a wash for cases where re-use isn't needed, but it is far simpler
for callers that do want that. Functionally there should be no difference.
Even though we're past RC1, it seems like a good idea to back-patch this
into 9.5, like the prior commit. Otherwise, if there are any third-party
users of connectDatabase(), they'll have to deal with an API change in
9.5 and then another one in 9.6.
Michael Paquier
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When pg_dump prompts the user for a password, it remembers the password
for possible re-use by parallel worker processes. However, libpq might
have extracted the password from a connection string originally passed
as "dbname". Since we don't record the original form of dbname but
break it down to host/port/etc, the password gets lost. Fix that by
retrieving the actual password from the PGconn.
(It strikes me that this whole approach is rather broken, as it will also
lose other information such as options that might have been present in
the connection string. But we'll leave that problem for another day.)
In passing, get rid of rather silly use of malloc() for small fixed-size
arrays.
Back-patch to 9.3 where parallel pg_dump was introduced.
Report and fix by Zeus Kronion, adjusted a bit by Michael Paquier and me
|
| |
|
|
| |
Peter Geoghegan and Robert Haas
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rather than expect the Query returned by get_view_query() to be
read-only and then copy bits and pieces of it out, simply copy the
entire structure when we get it. This addresses an issue where
AcquireRewriteLocks, which is called by acquireLocksOnSubLinks(),
scribbles on the parsetree passed in, which was actually an entry
in relcache, leading to segfaults with certain view definitions.
This also future-proofs us a bit for anyone adding more code to this
path.
The acquireLocksOnSubLinks() was added in commit c3e0ddd40.
Back-patch to 9.3 as that commit was.
|
| |
|
|
|
|
| |
psql offered USING, WHERE, and SET in this context, but SET is not a valid
possibility here. Seems to have been a thinko in commit f5ab0a14ea83eb6c
which added DELETE's USING option.
|
| | |
|
| |
|
|
|
|
|
|
| |
Commit e5e11c8cc added a bunch of EXPLAIN statements without COSTS OFF
to the regression tests. This is contrary to project policy since it
results in unnecessary platform dependencies in the output (it's just
luck that we didn't get buildfarm failures from it). Per gripe from
Mike Wilson.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Previously the completion used the wrong word to match 'BY'. This was
introduced brokenly, in b2de2a. While at it, also add completion of
IN TABLESPACE ... OWNED BY and fix comments referencing nonexistent
syntax.
Reported-By: Michael Paquier
Author: Michael Paquier and Andres Freund
Discussion: CAB7nPqSHDdSwsJqX0d2XzjqOHr==HdWiubCi4L=Zs7YFTUne8w@mail.gmail.com
Backpatch: 9.4, like the commit introducing the bug
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Per a recommendation from Tomas Vondra, it's more helpful to refer to
the value that determines how skewed a Gaussian or exponential
distribution is as a parameter rather than a threshold.
Since it's not quite too late to get this right in 9.5, where it was
introduced, back-patch this. Most of the patch changes only comments
and documentation, but a few pgbench messages are altered to match.
Fabien Coelho, reviewed by Michael Paquier and by me.
|
| |
|
|
|
|
|
| |
This could result in the error context misidentifying where the error
actually occurred.
Craig Ringer
|
| |
|
|
|
|
| |
datapagemap_create() and datapagemap_destroy() were declared extern,
but they don't actually exist anywhere. Per YUriy Zhuravlev and
Michael Paquier.
|
| |
|
|
|
|
|
|
|
| |
Turns out we must set rl_basic_word_break_characters *before* we call
rl_initialize() the first time, because it will quietly copy that value
elsewhere --- but only on the first call. (Love these undocumented
dependencies.) I broke this yesterday in commit 2ec477dc8108339d;
like that commit, back-patch to all active branches. Per report from
Pavel Stehule.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is necessary so that REASSIGN OWNED does the right thing with
composite types, to wit, that it also alters ownership of the type's
pg_class entry -- previously, the pg_class entry remained owned by the
original user, which caused later other failures such as the new owner's
inability to use ALTER TYPE to rename an attribute of the affected
composite. Also, if the original owner is later dropped, the pg_class
entry becomes owned by a non-existant user which is bogus.
To fix, create a new routine AlterTypeOwner_oid which knows whether to
pass the request to ATExecChangeOwner or deal with it directly, and use
that in shdepReassignOwner rather than calling AlterTypeOwnerInternal
directly. AlterTypeOwnerInternal is now simpler in that it only
modifies the pg_type entry and recurses to handle a possible array type;
higher-level tasks are handled by either AlterTypeOwner directly or
AlterTypeOwner_oid.
I took the opportunity to add a few more objects to the test rig for
REASSIGN OWNED, so that more cases are exercised. Additional ones could
be added for superuser-only-ownable objects (such as FDWs and event
triggers) but I didn't want to push my luck by adding a new superuser to
the tests on a backpatchable bug fix.
Per bug #13666 reported by Chris Pacejo.
Backpatch to 9.5.
(I would back-patch this all the way back, except that it doesn't apply
cleanly in 9.4 and earlier because 59367fdf9 wasn't backpatched. If we
decide that we need this in earlier branches too, we should backpatch
both.)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It emerges that libreadline doesn't notice terminal window size change
events unless they occur while collecting input. This is easy to stumble
over if you resize the window while using a pager to look at query output,
but it can be demonstrated without any pager involvement. The symptom is
that queries exceeding one line are misdisplayed during subsequent input
cycles, because libreadline has the wrong idea of the screen dimensions.
The safest, simplest way to fix this is to call rl_reset_screen_size()
just before calling readline(). That causes an extra ioctl(TIOCGWINSZ)
for every command; but since it only happens when reading from a tty, the
performance impact should be negligible. A more valid objection is that
this still leaves a tiny window during entry to readline() wherein delivery
of SIGWINCH will be missed; but the practical consequences of that are
probably negligible. In any case, there doesn't seem to be any good way to
avoid the race, since readline exposes no functions that seem safe to call
from a generic signal handler --- rl_reset_screen_size() certainly isn't.
It turns out that we also need an explicit rl_initialize() call, else
rl_reset_screen_size() dumps core when called before the first readline()
call.
rl_reset_screen_size() is not present in old versions of libreadline,
so we need a configure test for that. (rl_initialize() is present at
least back to readline 4.0, so we won't bother with a test for it.)
We would need a configure test anyway since libedit's emulation of
libreadline doesn't currently include such a function. Fortunately,
libedit seems not to have any corresponding bug.
Merlin Moncure, adjusted a bit by me
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We carry around information about if a given query has row security or
not to allow the plancache to use that information to invalidate a
planned query in the event that the environment changes.
Previously, the flag of one of the subqueries was simply being copied
into place to indicate if the query overall included RLS components.
That's wrong as we need the global OR of all subqueries. Fix by
changing the code to match how fireRIRules works, which is results
in OR'ing all of the flags.
Noted by Tom.
Back-patch to 9.5 where RLS was introduced.
|
| |
|
|
| |
Per Michael Paquier
|
