| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a CREATE TABLE command uses both LIKE and traditional inheritance,
Vars in CHECK constraints and expression indexes that are absorbed
from a LIKE parent table tended to get mis-numbered, resulting in
wrong answers and/or bizarre error messages (though probably not any
actual crashes, thanks to validation occurring in the executor).
In v12 and up, the same could happen to Vars in GENERATED expressions,
even in cases with no LIKE clause but multiple traditional-inheritance
parents.
The cause of the problem for LIKE is that parse_utilcmd.c supposed
it could renumber such Vars correctly during transformCreateStmt(),
which it cannot since we have not yet accounted for columns added via
inheritance. Fix that by postponing processing of LIKE INCLUDING
CONSTRAINTS, DEFAULTS, GENERATED, INDEXES till after we've performed
DefineRelation().
The error with GENERATED and multiple inheritance is a simple oversight
in MergeAttributes(); it knows it has to renumber Vars in inherited
CHECK constraints, but forgot to apply the same processing to inherited
GENERATED expressions (a/k/a defaults).
Per bug #16272 from Tom Gottfried. The non-GENERATED variants of the
issue are ancient, presumably dating right back to the addition of
CREATE TABLE LIKE; hence back-patch to all supported branches.
Discussion: https://postgr.es/m/16272-6e32da020e9a9381@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 9d701e624f caused the regression test for EXPLAIN to fail on
the buildfarm member prion. This happened because of instability of
test output, i.e., in text format, whether "Planning:" line is output
varies depending on the system state.
This commit updated the regression test so that it ignores that
"Planning:" line to produce more stable test output and get rid of
the test failure.
Back-patch to v13.
Author: Fujii Masao
Discussion: https://postgr.es/m/1803897.1598021621@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit ce77abe63c allowed EXPLAIN (BUFFERS) to report the information
on buffer usage during planning phase. However three issues were
reported regarding this feature.
(1) Previously, EXPLAIN option BUFFERS required ANALYZE. So the query
had to be actually executed by specifying ANALYZE even when we
want to see only the planner's buffer usage. This was inconvenient
especially when the query was write one like DELETE.
(2) EXPLAIN included the planner's buffer usage in summary
information. So SUMMARY option had to be enabled to report that.
Also this format was confusing.
(3) The output structure for planning information was not consistent
between TEXT format and the others. For example, "Planning" tag
was output in JSON format, but not in TEXT format.
For (1), this commit allows us to perform EXPLAIN (BUFFERS) without
ANALYZE to report the planner's buffer usage.
For (2), this commit changed EXPLAIN output so that the planner's
buffer usage is reported before summary information.
For (3), this commit made the output structure for planning
information more consistent between the formats.
Back-patch to v13 where the planner's buffer usage was allowed to
be reported in EXPLAIN.
Reported-by: Pierre Giraud, David Rowley
Author: Fujii Masao
Reviewed-by: David Rowley, Julien Rouhaud, Pierre Giraud
Discussion: https://postgr.es/m/07b226e6-fa49-687f-b110-b7c37572f69e@dalibo.com
|
| |
|
|
|
|
| |
Author: Masahiko Sawada
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CA+fd4k4m9hFSrRLB3etPWO5_v5=MujVZWRtz63q+55hM0Dz25Q@mail.gmail.com
|
| |
|
|
|
|
|
| |
Reviewed-by: Abhijit Menon-Sen
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CAApHDvobgmCs6CohqhKTUf7D8vffoZXQTCBTERo9gbOeZmvLTw%40mail.gmail.com
Backpatch-through: 11, where JIT was added
|
| |
|
|
|
|
|
|
|
|
|
| |
This reverts commit 49967da65aec970fcda123acc681f1df5d70bfc6.
Enough time has passed that we can be confident that 07f32fcd23a
resolved the issue. Therefore we can remove the temporary debugging
aids.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/E1k7tGP-0005V0-5k@gemulon.postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This corrects an oversight by me in 20729324078, which made
ProcArrayClearTransaction() increment xactCompletionCount. That requires an
exclusive lock, obviously.
There's other approaches that avoid the exclusive acquisition, but given that a
2PC commit is fairly heavyweight, it doesn't seem worth doing so. I've not been
able to measure a performance difference, unsurprisingly. I did add a
comment documenting that we could do so, should it ever become a bottleneck.
Reported-By: Tom Lane <tgl@sss.pgh.pa.us>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/1355915.1597794204@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit a477bfc1d fixed eval_const_expressions() to ensure that it
didn't generate unnecessary RelabelType nodes, but I failed to notice
that some other places in the planner had the same issue. Really
noplace in the planner should be using plain makeRelabelType(), for
fear of generating expressions that should be equal() to semantically
equivalent trees, but aren't.
An example is that because canonicalize_ec_expression() failed
to be careful about this, we could end up with an equivalence class
containing both a plain Const, and a Const-with-RelabelType
representing exactly the same value. So far as I can tell this led to
no visible misbehavior, but we did waste a bunch of cycles generating
and evaluating "Const = Const-with-RelabelType" to prove such entries
are redundant.
Hence, move the support function added by a477bfc1d to where it can
be more generally useful, and use it in the places where planner code
previously used makeRelabelType.
Back-patch to v12, like the previous patch. While I have no concrete
evidence of any real misbehavior here, it's certainly possible that
I overlooked a case where equivalent expressions that aren't equal()
could cause a user-visible problem. In any case carrying extra
RelabelType nodes through planning to execution isn't very desirable.
Discussion: https://postgr.es/m/1311836.1597781384@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This view displays the usages of all the memory contexts of the server
process attached to the current session. This information is useful to
investigate the cause of backend-local memory bloat.
This information can be also collected by calling
MemoryContextStats(TopMemoryContext) via a debugger. But this technique
cannot be uesd in some environments because no debugger is available there.
And it outputs lots of text messages and it's not easy to analyze them.
So, pg_backend_memory_contexts view allows us to access to backend-local
memory contexts information more easily.
Bump catalog version.
Author: Atsushi Torikoshi, Fujii Masao
Reviewed-by: Tatsuhito Kasahara, Andres Freund, Daniel Gustafsson, Robert Haas, Michael Paquier
Discussion: https://postgr.es/m/72a656e0f71d0860161e0b3f67e4d771@oss.nttdata.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When preparing a transaction xactCompletionCount needs to be
incremented, even though the transaction has not committed
yet. Otherwise the snapshot used within the transaction otherwise can
get reused outside of the prepared transaction. As GetSnapshotData()
does not include the current xid when building a snapshot, reuse would
not be correct.
Somewhat surprisingly the regression tests only rarely show incorrect
results without the fix. The reason for that is that often the
snapshot's xmax will be >= the backend xid, yielding a snapshot that
is correct, despite the bug.
I'm working on a reliable test for the bug, but it seems worth seeing
whether this fixes all the BF failures while I do.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/E1k7tGP-0005V0-5k@gemulon.postgresql.org
|
| |
|
|
|
|
|
|
|
| |
As Tom Lane pointed out, it could defeat the compiler's printf() format
string verification.
Backpatch to v12, like that patch that introduced it.
Discussion: https://www.postgresql.org/message-id/1069283.1597672779%40sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previous commits made it faster/more scalable to compute snapshots. But not
building a snapshot is still faster. Now that GetSnapshotData() does not
maintain RecentGlobal* anymore, that is actually not too hard:
This commit introduces xactCompletionCount, which tracks the number of
top-level transactions with xids (i.e. which may have modified the database)
that completed in some form since the start of the server.
We can avoid rebuilding the snapshot's contents whenever the current
xactCompletionCount is the same as it was when the snapshot was
originally built. Currently this check happens while holding
ProcArrayLock. While it's likely possible to perform the check without
acquiring ProcArrayLock, it seems better to do that separately /
later, some careful analysis is required. Even with the lock this is a
significant win on its own.
On a smaller two socket machine this gains another ~1.03x, on a larger
machine the effect is roughly double (earlier patch version tested
though). If we were able to safely avoid the lock there'd be another
significant gain on top of that.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
|
| |
|
|
|
| |
Introduced in adbe62d0. Per buildfarm member prion, when using
RELCACHE_FORCE_RELEASE.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PL/Sample is an example template of procedural-language handler. This
can be used as a base to implement a custom PL, or as a facility to test
APIs dedicated to PLs. Much more could be done in this module, like
adding a simple validator, but this is left as future work.
The documentation included originally some C code to understand the
basics of PL handler implementation, but it was outdated, and not really
helpful either if trying to implement a new procedural language,
particularly when it came to the integration of a PL installation with
CREATE EXTENSION.
Author: Mark Wong
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20200612172648.GA3327@2ndQuadrant.com
|
| |
|
|
|
|
|
|
| |
This should improve stability in the tests.
Per buildfarm member hyrax (CLOBBER_CACHE_ALWAYS) via Tom Lane.
Discussion: https://postgr.es/m/871534.1597503261@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a commit or abort record includes "dropped relfilenodes", then replaying
the record will remove data files. That is surely a "special rel update",
but the records were not marked as such. Fix that, teach pg_rewind to
expect and ignore them, and add a test case to cover it.
It's always been like this, but no backporting for fear of breaking
existing applications. If an application parsed the WAL but was not
handling commit/abort records, it would stop working. That might be a good
thing if it really needed to handle the dropped rels, but it will be caught
when the application is updated to work with PostgreSQL v14 anyway.
Discussion: https://www.postgresql.org/message-id/07b33e2c-46a6-86a1-5f9e-a7da73fddb95%40iki.fi
Reviewed-by: Amit Kapila, Michael Paquier
|
| |
|
|
|
|
|
|
| |
xact.h included utils/datetime.h, which cannot be used in the frontend
(it includes fmgr.h, which needs Datum). But xact.h only needs the
definition of TimestampTz from it, which is available directly in
datatypes/timestamp.h. Change xact.h to include that instead of
utils/datetime.h, so that it can be used in client programs.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A number of client programs have a "--progress" option that when printing
to a TTY, updates the current line by printing a '\r' and overwriting it.
After the last line, '\n' needs to be printed to move the cursor to the
next line. pg_basebackup and pgbench got this right, but pg_rewind and
pg_checksums were slightly wrong. pg_rewind printed the newline to stdout
instead of stderr, and pg_checksums printed the newline even when not
printing to a TTY. Fix them, and also add a 'finished' argument to
pg_basebackup's progress_report() function, to keep it consistent with
the other programs.
Backpatch to v12. pg_rewind's newline was broken with the logging changes
in commit cc8d415117 in v12, and pg_checksums was introduced in v12.
Discussion: https://www.postgresql.org/message-id/82b539e5-ae33-34b0-1aee-22b3379fd3eb@iki.fi
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This bug, recently introduced in 941697c3c1a, at least lead to vacuum
failing because it found tuples inserted by a running transaction, but
below the freeze limit. The freeze limit in turn is directly affected
by the aforementioned bug.
Thanks to Tom Lane figuring how to make the bug reproducible.
We should add a few more assertions to make sure this type of bug
isn't as hard to notice, but it's not yet clear how to best do so.
Co-Diagnosed-By: Tom Lane <tgl@sss.pgh.pa.us>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/1013484.1597609043@sss.pgh.pa.us
|
| |
|
|
|
|
|
| |
This is temporary. While possibly some more error checking / debugging
in this path would be a good thing, it'll not look exactly like this.
Discussion: https://postgr.es/m/20200816181604.l54m6kss5ntd6xow@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
| |
Reuse cautionary language from src/test/ssl/README in
src/test/kerberos/README. SLRUs have had access to six-character
segments names since commit 73c986adde5d73a5e2555da9b5c8facedb146dcd,
and recovery stopped calling HeapTupleHeaderAdvanceLatestRemovedXid() in
commit 558a9165e081d1936573e5a7d576f5febd7fb55a. The other corrections
are more self-evident.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
|
| |
|
|
|
|
|
| |
The version being checked for is 20 years old.
Reviewed-by: Marco Atzeri <marco.atzeri@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/aa266ede-baaa-f4e6-06cf-5b1737610e9a%402ndquadrant.com
|
| |
|
|
|
|
|
| |
Fixed more than 10 years ago.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/flat/aa266ede-baaa-f4e6-06cf-5b1737610e9a%402ndquadrant.com
|
| |
|
|
|
|
|
|
|
|
| |
Commit 7259736a6e added two variables CheckXidAlive and bsysscan to detect
concurrent aborts and used these in inline functions that are part of the
API that can be used by extensions. So it is better to mark them with
PGDLLIMPORT.
Reported-by: Thomas Munro
Discussion: https://postgr.es/m/CA+hUKGJ7+HYupd=Pz9+QrXa-C_YnbC4rAYu8V+=OKg=UgdzMeg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
nodeSubplan.c expects that the testexpr for a hashable ANY SubPlan
has the form of one or more OpExprs whose LHS is an expression of the
outer query's, while the RHS is an expression over Params representing
output columns of the subquery. However, the planner only went as far
as verifying that the clauses were all binary OpExprs. This works
99.99% of the time, because the clauses have the right shape when
emitted by the parser --- but it's possible for function inlining to
break that, as reported by PegoraroF10. To fix, teach the planner
to check that the LHS and RHS contain the right things, or more
accurately don't contain the wrong things. Given that this has been
broken for years without anyone noticing, it seems sufficient to just
give up hashing when it happens, rather than go to the trouble of
commuting the clauses back again (which wouldn't necessarily work
anyway).
While poking at that, I also noticed that nodeSubplan.c had a baked-in
assumption that the number of hash clauses is identical to the number
of subquery output columns. Again, that's fine as far as parser output
goes, but it's not hard to break it via function inlining. There seems
little reason for that assumption though --- AFAICS, the only thing
it's buying us is not having to store the number of hash clauses
explicitly. Adding code to the planner to reject such cases would take
more code than getting nodeSubplan.c to cope, so I fixed it that way.
This has been broken for as long as we've had hashable SubPlans,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/1549209182255-0.post@n3.nabble.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Similar to the previous changes this increases the chance that data
frequently needed by GetSnapshotData() stays in l2 cache. In many
workloads subtransactions are very rare, and this makes the check for
that considerably cheaper.
As this removes the last member of PGXACT, there is no need to keep it
around anymore.
On a larger 2 socket machine this and the two preceding commits result
in a ~1.07x performance increase in read-only pgbench. For read-heavy
mixed r/w workloads without row level contention, I see about 1.1x.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Similar to the previous commit this increases the chance that data
frequently needed by GetSnapshotData() stays in l2 cache. As we now
take care to not unnecessarily write to ProcGlobal->vacuumFlags, there
should be very few modifications to the ProcGlobal->vacuumFlags array.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The new array contains the xids for all connected backends / in-use
PGPROC entries in a dense manner (in contrast to the PGPROC/PGXACT
arrays which can have unused entries interspersed).
This improves performance because GetSnapshotData() always needs to
scan the xids of all live procarray entries and now there's no need to
go through the procArray->pgprocnos indirection anymore.
As the set of running top-level xids changes rarely, compared to the
number of snapshots taken, this substantially increases the likelihood
of most data required for a snapshot being in l2 cache. In
read-mostly workloads scanning the xids[] array will sufficient to
build a snapshot, as most backends will not have an xid assigned.
To keep the xid array dense ProcArrayRemove() needs to move entries
behind the to-be-removed proc's one further up in the array. Obviously
moving array entries cannot happen while a backend sets it
xid. I.e. locking needs to prevent that array entries are moved while
a backend modifies its xid.
To avoid locking ProcArrayLock in GetNewTransactionId() - a fairly hot
spot already - ProcArrayAdd() / ProcArrayRemove() now needs to hold
XidGenLock in addition to ProcArrayLock. Adding / Removing a procarray
entry is not a very frequent operation, even taking 2PC into account.
Due to the above, the dense array entries can only be read or modified
while holding ProcArrayLock and/or XidGenLock. This prevents a
concurrent ProcArrayRemove() from shifting the dense array while it is
accessed concurrently.
While the new dense array is very good when needing to look at all
xids it is less suitable when accessing a single backend's xid. In
particular it would be problematic to have to acquire a lock to access
a backend's own xid. Therefore a backend's xid is not just stored in
the dense array, but also in PGPROC. This also allows a backend to
only access the shared xid value when the backend had acquired an
xid.
The infrastructure added in this commit will be used for the remaining
PGXACT fields in subsequent commits. They are kept separate to make
review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Parallel-restoring a foreign key that references a partitioned table
with several levels of partitions can fail:
pg_restore: while PROCESSING TOC:
pg_restore: from TOC entry 6684; 2606 29166 FK CONSTRAINT fk fk_a_fkey postgres
pg_restore: error: could not execute query: ERROR: there is no unique constraint matching given keys for referenced table "pk"
Command was: ALTER TABLE fkpart3.fk
ADD CONSTRAINT fk_a_fkey FOREIGN KEY (a) REFERENCES fkpart3.pk(a);
This happens in parallel restore mode because some index partitions
aren't yet attached to the topmost partitioned index that the FK uses,
and so the index is still invalid. The current code marks the FK as
dependent on the first level of index-attach dump objects; the bug is
fixed by recursively marking the FK on their children.
Backpatch to 12, where FKs to partitioned tables were introduced.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/3170626.1594842723@sss.pgh.pa.us
Backpatch: 12-master
|
| |
|
|
| |
Oversight in commit 2c03216d831.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Now that xmin isn't needed for GetSnapshotData() anymore, it leads to
unnecessary cacheline ping-pong to have it in PGXACT, as it is updated
considerably more frequently than the other PGXACT members.
After the changes in dc7420c2c92, this is a very straight-forward change.
For highly concurrent, snapshot acquisition heavy, workloads this change alone
can significantly increase scalability. E.g. plain pgbench on a smaller 2
socket machine gains 1.07x for read-only pgbench, 1.22x for read-only pgbench
when submitting queries in batches of 100, and 2.85x for batches of 100
'SELECT';. The latter numbers are obviously not to be expected in the
real-world, but micro-benchmark the snapshot computation
scalability (previously spending ~80% of the time in GetSnapshotData()).
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When a table is scanned by heapam_index_build_range_scan (née
IndexBuildHeapScan) and the table lock being held allows concurrent data
changes, it is possible for new HOT chains to sprout in a page that were
unknown when the scan of a page happened. This leads to an error such
as
ERROR: failed to find parent tuple for heap-only tuple at (X,Y) in table "tbl"
because the root tuple was not present when we first obtained the list
of the page's root tuples. This can be fixed by re-obtaining the list
of root tuples, if we see that a heap-only tuple appears to point to a
non-existing root.
This was reported by Anastasia as occurring for BRIN summarization
(which exists since 9.5), but I think it could theoretically also happen
with CREATE INDEX CONCURRENTLY (much older) or REINDEX CONCURRENTLY
(very recent). It seems a happy coincidence that BRIN forces us to
backpatch this all the way to 9.5.
Reported-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Diagnosed-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/602d8487-f0b2-5486-0088-0f372b2549fa@postgrespro.ru
Backpatch: 9.5 - master
|
| |
|
|
|
|
| |
Time appears to be passing fast.
Reported-By: Peter Geoghegan <pg@bowt.ie>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a page range is desummarized at just the right time concurrently with
an index walk, BRIN would raise an error indicating index corruption.
This is scary and unhelpful; silently returning that the page range is
not summarized is sufficient reaction.
This bug was introduced by commit 975ad4e602ff as additional protection
against a bug whose actual fix was elsewhere. Backpatch equally.
Reported-By: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Diagnosed-By: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/2588667e-d07d-7e10-74e2-7e1e46194491@postgrespro.ru
Backpatch: 9.5 - master
|
| |
|
|
|
|
|
|
|
| |
This had gotten a little disjointed over time, and some of the grammar
was sloppy. Rewrite for more clarity.
In passing, re-pgindent some recently added comments.
No code changes.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The reason for doing so is that a subsequent commit will need that to
avoid wraparound issues. As the subsequent change is large this was
split out for easier review.
The reason this is not a perfect straight-forward change is that we do
not want track 64bit xids in the procarray or the WAL. Therefore we
need to advance lastestCompletedXid in relation to 32 bit xids. The
code for that is now centralized in MaintainLatestCompletedXid*.
Author: Andres Freund
Reviewed-By: Thomas Munro, Robert Haas, David Rowley
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
| |
Including Full in variable names duplicates the type information and
leads to overly long names. As FullTransactionId cannot accidentally
be casted to TransactionId that does not seem necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/20200724011143.jccsyvsvymuiqfxu@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
| |
This allows the tab completion of REINDEX to handle an optional
parenthesized list of options. This case is more complicated than
VACUUM or ANALYZE because of CONCURRENTLY and the different object types
to consider with the reindex.
Author: Justin Pryzby
Reviewed-by: Alexey Kondratov, Michael Paquier
Discussion: https://postgr.es/m/20200403182712.GR14618@telsasoft.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
They are equivalent, except that StrNCpy() zero-fills the entire
destination buffer instead of providing just one trailing zero. For
all but a tiny number of callers, that's just overhead rather than
being desirable.
Remove StrNCpy() as it is now unused.
In some cases, namestrcpy() is the more appropriate function to use.
While we're here, simplify the API of namestrcpy(): Remove the return
value, don't check for NULL input. Nothing was using that anyway.
Also, remove a few unused name-related functions.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/44f5e198-36f6-6cdb-7fa9-60e34784daae%402ndquadrant.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is like CVE-2018-1058 commit
582edc369cdbd348d68441fc50fa26a84afd0c1a. Today, a malicious user of a
publisher or subscriber database can invoke arbitrary SQL functions
under an identity running replication, often a superuser. This fix may
cause "does not exist" or "no schema has been selected to create in"
errors in a replication process. After upgrading, consider watching
server logs for these errors. Objects accruing schema qualification in
the wake of the earlier commit are unlikely to need further correction.
Back-patch to v10, which introduced logical replication.
Security: CVE-2020-14349
|
| |
|
|
|
|
|
| |
Any libpq client can use the header. Clients include backend components
postgres_fdw, dblink, and logical replication apply worker. Back-patch
to v10, because another fix needs this. In released branches, just copy
the header and keep the original.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Hostile objects located within the installation-time search_path could
capture references in an extension's installation or upgrade script.
If the extension is being installed with superuser privileges, this
opens the door to privilege escalation. While such hazards have existed
all along, their urgency increases with the v13 "trusted extensions"
feature, because that lets a non-superuser control the installation path
for a superuser-privileged script. Therefore, make a number of changes
to make such situations more secure:
* Tweak the construction of the installation-time search_path to ensure
that references to objects in pg_catalog can't be subverted; and
explicitly add pg_temp to the end of the path to prevent attacks using
temporary objects.
* Disable check_function_bodies within installation/upgrade scripts,
so that any security gaps in SQL-language or PL-language function bodies
cannot create a risk of unwanted installation-time code execution.
* Adjust lookup of type input/receive functions and join estimator
functions to complain if there are multiple candidate functions. This
prevents capture of references to functions whose signature is not the
first one checked; and it's arguably more user-friendly anyway.
* Modify various contrib upgrade scripts to ensure that catalog
modification queries are executed with secure search paths. (These
are in-place modifications with no extension version changes, since
it is the update process itself that is at issue, not the end result.)
Extensions that depend on other extensions cannot be made fully secure
by these methods alone; therefore, revert the "trusted" marking that
commit eb67623c9 applied to earthdistance and hstore_plperl, pending
some better solution to that set of issues.
Also add documentation around these issues, to help extension authors
write secure installation scripts.
Patch by me, following an observation by Andres Freund; thanks
to Noah Misch for review.
Security: CVE-2020-14350
|
| |
|
|
| |
There is no reason to distinguish between readers and writers here.
|
| |
|
|
|
|
|
|
|
| |
Coverity pointed out, not unreasonably, that we checked fseeko's
result at every other call site but these. Failure to seek in the
temp file (note this is NOT pg_dump's output file) seems quite
unlikely, and even if it did happen the file length cross-check
further down would probably detect the problem. Still, that's a
poor excuse for not checking the result of a system call.
|
| |
|
|
|
|
|
|
| |
Testing that an unsigned variable is >= 0 is pretty pointless,
as noted by Coverity and numerous buildfarm members.
In passing, add comment about new uses of "volatile" --- Coverity
doesn't much like that either, but it seems probably necessary.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ashutosh Bapat noticed that when logical walsender needs to wait for
WAL, and it realizes that it must send a keepalive message to
walreceiver to update the sent-LSN, which *does not* request a reply
from walreceiver, it wrongly sets the flag that it's going to wait for
that reply. That means that any future would-be sender of feedback
messages ends up not sending a feedback message, because they all
believe that a reply is expected.
With built-in logical replication there's not much harm in this, because
WalReceiverMain will send a ping-back every wal_receiver_timeout/2
anyway; but with other logical replication systems (e.g. pglogical) it
can cause significant pain.
This problem was introduced in commit 41d5f8ad734, where the
request-reply flag was changed from true to false to WalSndKeepalive,
without at the same time removing the line that sets
waiting_for_ping_response.
Just removing that line would be a sufficient fix, but it seems better
to shift the responsibility of setting the flag to WalSndKeepalive
itself instead of requiring caller to do it; this is clearly less
error-prone.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Ashutosh Bapat <ashutosh.bapat@2ndquadrant.com>
Backpatch: 9.5 and up
Discussion: https://postgr.es/m/20200806225558.GA22401@alvherre.pgsql
|
