| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Given an updatable view with a DO ALSO INSERT ... SELECT rule, a
multi-row INSERT ... VALUES query on the view fails if the VALUES list
contains any DEFAULTs that are not replaced by view defaults. This
manifests as an "unrecognized node type" error, or an Assert failure,
in an assert-enabled build.
The reason is that when RewriteQuery() attempts to replace the
remaining DEFAULT items with NULLs in any product queries, using
rewriteValuesRTEToNulls(), it assumes that the VALUES RTE is located
at the same rangetable index in each product query. However, if the
product query is an INSERT ... SELECT, then the VALUES RTE is actually
in the SELECT part of that query (at the same index), rather than the
top-level product query itself.
Fix, by descending to the SELECT in such cases. Note that we can't
simply use getInsertSelectQuery() for this, since that expects to be
given a raw rule action with OLD and NEW placeholder entries, so we
duplicate its logic instead.
While at it, beef up the checks in getInsertSelectQuery() by checking
that the jointree->fromlist node is indeed a RangeTblRef, and that the
RTE it points to has rtekind == RTE_SUBQUERY.
Per bug #17803, from Alexander Lakhin. Back-patch to all supported
branches.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/17803-53c63ed4ecb4eac6%40postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Whe decoding a transactional logical message, logicalmsg_decode called
SnapBuildGetOrBuildSnapshot. But we may not have a consistent snapshot
yet at that point. We don't actually need the snapshot in this case
(during replay we'll have the snapshot from the transaction), so in
practice this is harmless. But in assert-enabled build this crashes.
Fixed by requesting the snapshot only in non-transactional case, where
we are guaranteed to have SNAPBUILD_CONSISTENT.
Backpatch to 11. The issue exists since 9.6.
Backpatch-through: 11
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/84d60912-6eab-9b84-5de3-41765a5449e8@enterprisedb.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
SPI_result_code_string() was missing support for SPI_OK_TD_REGISTER,
and in v15 and later, it was missing support for SPI_OK_MERGE, as was
pltcl_process_SPI_result().
The last of those would trigger an error if a MERGE was executed from
PL/Tcl. The others seem fairly innocuous, but worth fixing.
Back-patch to all supported branches. Before v15, this is just adding
SPI_OK_TD_REGISTER to SPI_result_code_string(), which is unlikely to
be seen by anyone, but seems worth doing for completeness.
Reviewed by Tom Lane.
Discussion:
https://postgr.es/m/CAEZATCUg8V%2BK%2BGcafOPqymxk84Y_prXgfe64PDoopjLFH6Z0Aw%40mail.gmail.com
https://postgr.es/m/CAEZATCUMe%2B_KedPMM9AxKqm%3DSZogSxjUcrMe%2BsakusZh3BFcQw%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If asked to decrease the size of a large (>8K) palloc chunk,
AllocSetRealloc could improperly change the Valgrind state of memory
beyond the new end of the chunk: it would mark data UNDEFINED as far
as the old end of the chunk after having done the realloc(3) call,
thus tromping on the state of memory that no longer belongs to it.
One would normally expect that memory to now be marked NOACCESS,
so that this mislabeling might prevent detection of later errors.
If realloc() had chosen to move the chunk someplace else (unlikely,
but well within its rights) we could also mismark perfectly-valid
DEFINED data as UNDEFINED, causing false-positive valgrind reports
later. Also, any malloc bookkeeping data placed within this area
might now be wrongly marked, causing additional problems.
Fix by replacing relevant uses of "oldsize" with "Min(size, oldsize)".
It's sufficient to mark as far as "size" when that's smaller, because
whatever remains in the new chunk size will be marked NOACCESS below,
and we expect realloc() to have taken care of marking the memory
beyond the new official end of the chunk.
While we're here, also rename the function's "oldsize" variable
to "oldchksize" to more clearly explain what it actually holds,
namely the distance to the end of the chunk (that is, requested size
plus trailing padding). This is more consistent with the use of
"size" and "chksize" to hold the new requested size and chunk size.
Add a new variable "oldsize" in the one stanza where we're actually
talking about the old requested size.
Oversight in commit c477f3e44. Back-patch to all supported branches,
as that was, just in case anybody wants to do valgrind testing on back
branches.
Karina Litskevich
Discussion: https://postgr.es/m/CACiT8iaAET-fmzjjZLjaJC4zwSJmrFyL7LAdHwaYyjjQOQ4hcg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Failing to do so results in an error when a pgbench script tries to
start a serializable transaction inside a pipeline, because by the time
BEGIN ISOLATION LEVEL SERIALIZABLE is executed, we're already in a
transaction that has acquired a snapshot, so the server rightfully
complains.
We can work around that by preparing all commands in the pipeline before
actually starting the pipeline. This changes the existing code in two
aspects: first, we now prepare each command individually at the point
where that command is about to be executed; previously, we would prepare
all commands in a script as soon as the first command of that script
would be executed. It's hard to see that this would make much of a
difference (particularly since it only affects the first time to execute
each script in a client), but I didn't actually try to measure it.
Secondly, we no longer use PQsendPrepare() in pipeline mode, but only
PQprepare. There's no specific reason for this change other than no
longer needing to do differently in pipeline mode. (Previously we had
no choice, because in pipeline mode PQprepare could not be used.)
Backpatch to 14, where pgbench got support for pipeline mode.
Reported-by: Yugo NAGATA <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/20210716153013.fc53b1c780b06fccc07a7f0d@sraoss.co.jp
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
When evaluating clauses on multiple scan keys of a multi-column BRIN
index, we can stop processing as soon as we find a scan key eliminating
the range, and the range should not be added to tbe bitmap.
That's how it worked before 14, but since a681e3c107a the code treated
the range as matching if it matched at least the last scan key.
Backpatch to 14, where this code was introduced.
Backpatch-through: 14
Discussion: https://postgr.es/m/ebc18613-125e-60df-7520-fcbe0f9274fc%40enterprisedb.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ruleutils.c blindly printed the user-given alias (or nothing if there
hadn't been one) for the target table of INSERT/UPDATE/DELETE queries.
That works a large percentage of the time, but not always: for queries
appearing in WITH, it's possible that we chose a different alias to
avoid conflict with outer-scope names. Since the chosen alias would
be used in any Var references to the target table, this'd lead to an
inconsistent printout with consequences such as dump/restore failures.
The correct logic for printing (or not) a relation alias was embedded
in get_from_clause_item. Factor it out to a separate function so that
we don't need a jointree node to use it. (Only a limited part of that
function can be reached from these new call sites, but this seems like
the cleanest non-duplicative factorization.)
In passing, I got rid of a redundant "\d+ rules_src" step in rules.sql.
Initial report from Jonathan Katz; thanks to Vignesh C for analysis.
This has been broken for a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/e947fa21-24b2-f922-375a-d4f763ef3e4b@postgresql.org
Discussion: https://postgr.es/m/CALDaNm1MMntjmT_NJGp-Z=xbF02qHGAyuSHfYHias3TqQbPF2w@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
OpenSSL 1.1.1 and newer versions have added support for RSA-PSS
certificates, which requires the use of a specific routine in OpenSSL to
determine which hash function to use when compiling it when using
channel binding in SCRAM-SHA-256. X509_get_signature_nid(), that is the
original routine the channel binding code has relied on, is not able to
determine which hash algorithm to use for such certificates. However,
X509_get_signature_info(), new to OpenSSL 1.1.1, is able to do it. This
commit switches the channel binding logic to rely on
X509_get_signature_info() over X509_get_signature_nid(), which would be
the choice when building with 1.1.1 or newer.
The error could have been triggered on the client or the server, hence
libpq and the backend need to have their related code paths patched.
Note that attempting to load an RSA-PSS certificate with OpenSSL 1.1.0
or older leads to a failure due to an unsupported algorithm.
The discovery of relying on X509_get_signature_info() comes from Jacob,
the tests have been written by Heikki (with few tweaks from me), while I
have bundled the whole together while adding the bits needed for MSVC
and meson.
This issue exists since channel binding exists, so backpatch all the way
down. Some tests are added in 15~, triggered if compiling with OpenSSL
1.1.1 or newer, where the certificate and key files can easily be
generated for RSA-PSS.
Reported-by: Gunnar "Nick" Bluth
Author: Jacob Champion, Heikki Linnakangas
Discussion: https://postgr.es/m/17760-b6c61e752ec07060@postgresql.org
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When an aggregate function is used as a WindowFunc and a tuple transitions
out of the window frame, we ordinarily try to make use of the aggregate
function's inverse transition function to "unaggregate" the exiting tuple.
This optimization is disabled for various cases, including when the
aggregate contains a volatile function. In such a case we'd be unable to
ensure that the transition value was calculated to the same value during
transitions and inverse transitions. Unfortunately, we did this check by
calling contain_volatile_functions() which does not recursively search
SubPlans for volatile functions. If the aggregate function's arguments or
its FILTER clause contained a subplan with volatile functions then we'd
fail to notice this.
Here we fix this by just disabling the optimization when the WindowFunc
contains any subplans. Volatile functions are not the only reason that a
subplan may have nonrepeatable results.
Bug: #17777
Reported-by: Anban Company
Discussion: https://postgr.es/m/17777-860b739b6efde977%40postgresql.org
Reviewed-by: Tom Lane
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Try to disable ASLR when building in EXEC_BACKEND mode, to avoid random
memory mapping failures while testing. For developer use only, no
effect on regular builds.
This has been originally applied as of f3e7806 for v15~, but
recently-added buildfarm member gokiburi tests this configuration on
older branches as well, causing it to fail randomly as ASLR would be
enabled.
Suggested-by: Andres Freund <andres@anarazel.de>
Tested-by: Bossart, Nathan <bossartn@amazon.com>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
Backpatch-through: 12
|
| |
|
|
|
| |
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 8ae33814b61e2eabfaac363c777e0cbf346761de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
pqsecure_open_gss() includes a code path handling error messages with
v2-style protocol messages coming from the server. The client-side
buffer holding the error message does not force a NULL-termination, with
the data of the server getting copied to the errorMessage of the
connection. Hence, it would be possible for a server to send an
unterminated string and copy arbitrary bytes in the buffer receiving the
error message in the client, opening the door to a crash or even data
exposure.
As at this stage of the authentication process the exchange has not been
completed yet, this could be abused by an attacker without Kerberos
credentials. Clients that have a valid kerberos cache are vulnerable as
libpq opportunistically requests for it except if gssencmode is
disabled.
Author: Jacob Champion
Backpatch-through: 12
Security: CVE-2022-41862
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The prior coding of int64_div_fast_to_numeric() had a number of bugs
that would cause it to fail under different circumstances, such as
with log10val2 <= 0, or log10val2 a multiple of 4, or in the "slow"
numeric path with log10val2 >= 10.
None of those could be triggered by any of our current code, which
only uses log10val2 = 3 or 6. However, they made it a hazard for any
future code that might use it. Also, since this is exported by
numeric.c, users writing their own C code might choose to use it.
Therefore fix, and back-patch to v14, where it was introduced.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCW8gXgW0tgPxPgHDPhVX71%2BSWFRkhnXy%2BTfGDsKLepu2g%40mail.gmail.com
|
| |
|
|
|
|
|
| |
DST law changes in Greenland and Mexico. Notably, a new timezone
America/Ciudad_Juarez has been split off from America/Ojinaga.
Historical corrections for northern Canada, Colombia, and Singapore.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This test has been added as of 857ee8e that has introduced the SQL
function txid_status(), with the purpose of checking that a transaction
ID still in-progress during a crash is correctly marked as aborted after
recovery finishes.
This test is unstable, and some configuration scenarios may that easier
to reproduce (wal_level=minimal, wal_compression=on) because the WAL
holding the information about the in-progress transaction ID may not
have made it to disk yet, hence a post-crash recovery may cause the same
XID to be reused, triggering a test failure.
We have discussed a few approaches, like making this function force a
WAL flush to make it reliable across crashes, but we don't want to pay a
performance penalty in some scenarios, as well. The test could have
been tweaked to enforce a checkpoint but that actually breaks the
promise of the test to rely on a stable result of txid_status() after
a crash.
This issue has been reported a few times across the past years, with an
original report from Kyotaro Horiguchi. The buildfarm machines tanager,
hachi and gokiburi enable wal_compression, and fail on this test
periodically.
Discussion: https://postgr.es/m/3163112.1674762209@sss.pgh.pa.us
Discussion: https://postgr.es/m/20210305.115011.558061052471425531.horikyota.ntt@gmail.com
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If the final chunk of an oversized tuple being written out to disk was
exactly 32760 bytes, it would be corrupted due to a fencepost bug.
Bug #17619. Back-patch to 11 where the code arrived.
While testing that (see test module in archives), I (tmunro) noticed
that the per-participant page counter was not initialized to zero as it
should have been; that wasn't a live bug when it was written since DSM
memory was originally always zeroed, but since 14
min_dynamic_shared_memory might be configured and it supplies non-zeroed
memory, so that is also fixed here.
Author: Dmitry Astapov <dastapov@gmail.com>
Discussion: https://postgr.es/m/17619-0de62ceda812b8b5%40postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The drop database command waits for the logical replication sync worker to
accept ProcSignalBarrier and the worker's slot creation waits for the drop
database to finish which leads to a deadlock. This happens because the
tablesync worker holds interrupts while creating a slot.
We prevent cancel/die interrupts while creating a slot in the table sync
worker because it is possible that before the server finishes this
command, a concurrent drop subscription happens which would complete
without removing this slot and that leads to the slot existing until the
end of walsender. However, the slot will eventually get dropped at the
walsender exit time, so there is no danger of the dangling slot.
This patch reallows cancel/die interrupts while creating a slot and
modifies the test to wait for slots to become zero to prevent finding an
ephemeral slot.
The reported hang doesn't happen in PG14 as the drop database starts to
wait for ProcSignalBarrier with PG15 (commits 4eb2176318 and e2f65f4255)
but it is good to backpatch this till PG14 as it is not a good idea to
prevent interrupts during a network call that could block indefinitely.
Reported-by: Lakshmi Narayanan Sreethar
Diagnosed-by: Andres Freund
Author: Hou Zhijie
Reviewed-by: Vignesh C, Amit Kapila
Backpatch-through: 14, where it was introduced in commit 6b67d72b60
Discussion: https://postgr.es/m/CA+kvmZELXQ4ZD3U=XCXuG3KvFgkuPoN1QrEj8c-rMRodrLOnsg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When libpqrcv_connect (also known as walrcv_connect()) failed, it leaked the
libpq connection. In most paths that's fairly harmless, as the calling process
will exit soon after. But e.g. CREATE SUBSCRIPTION could lead to a somewhat
longer lived leak.
Fix by releasing resources, including the libpq connection, on error.
Add a test exercising the error code path. To make it reliable and safe, the
test tries to connect to port=-1, which happens to fail during connection
establishment, rather than during connection string parsing.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20230121011237.q52apbvlarfv6jm6@awork3.anarazel.de
Backpatch: 11-
|
| |
|
|
|
|
|
|
|
|
| |
b762fed64 recently changed this test to prevent subquery pullup to allow
us to test Memoize with lateral_vars. As pointed out by Tom Lane, OFFSET
0 is our standard way of preventing subquery pullups, so do it that way
instead.
Discussion: https://postgr.es/m/2144818.1674517061@sss.pgh.pa.us
Backpatch-through: 14, same as b762fed64
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The test in question was meant to be testing Memoize to ensure it worked
correctly when the inner side of the join contained lateral vars, however,
nothing in the lateral subquery stopped it from being pulled up into the
main query, so the planner did that, and that meant no more lateral vars.
Here we add a simple ORDER BY to stop the planner from being able to
pullup the lateral subquery.
Author: Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_LHJaN4L-tXpKMiPFnsCJWU1P8Xh59o0W7AA6UN99=cQ@mail.gmail.com
Backpatch-through: 14, where Memoize was added.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The motivation for this change is that when pg_dump dumps a
partitioned index that's marked REPLICA IDENTITY, it generates a
command sequence that applies REPLICA IDENTITY before the partitioned
index has been marked valid, causing restore to fail. We could
perhaps change pg_dump to not do it like that, but that would be
difficult and would not fix existing dump files with the problem.
There seems to be very little reason for the backend to disallow
this anyway --- the code ignores indisreplident when the index
isn't valid --- so instead let's fix it by allowing the case.
Commit 9511fb37a previously expressed a concern that allowing
indisreplident to be set on invalid indexes might allow us to
wind up in a situation where a table could have indisreplident
set on multiple indexes. I'm not sure I follow that concern
exactly, but in any case the only way that could happen is because
relation_mark_replica_identity is too trusting about the existing set
of markings being valid. Let's just rip out its early-exit code path
(which sure looks like premature optimization anyway; what are we
doing expending code to make redundant ALTER TABLE ... REPLICA
IDENTITY commands marginally faster and not-redundant ones marginally
slower?) and fix it to positively guarantee that no more than one
index is marked indisreplident.
The pg_dump failure can be demonstrated in all supported branches,
so back-patch all the way. I chose to back-patch 9511fb37a as well,
just to keep indisreplident handling the same in all branches.
Per bug #17756 from Sergey Belyashov.
Discussion: https://postgr.es/m/17756-dd50e8e0c8dd4a40@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
When the length was too short, the server read outside the allocation.
That yielded the same log noise as sending the correct length with
(backendPID,cancelAuthCode) matching nothing. Change to a message about
the unexpected length. Given the attacker's lack of control over the
memory layout and the general lack of diversity in memory layouts at the
code in question, we doubt a would-be attacker could cause a segfault.
Hence, while the report arrived via security@postgresql.org, this is not
a vulnerability. Back-patch to v11 (all supported versions).
Andrey Borodin, reviewed by Tom Lane. Reported by Andrey Borodin.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Add "#ifndef FRONTEND" where necessary to make pg_waldump build
on compilers that don't elide unused static-inline functions.
This back-patches relevant parts of commit 3e9ca5260, fixing build
breakage from dc7420c2c and back-patching of f10f0ae42.
Per recently-resurrected buildfarm member castoroides. We aren't
expecting castoroides to build anything newer than v11, but we
might as well clean up the intermediate branches while at it.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When ending recovery based on recovery_target_xid matching with
recovery_target_inclusive = off, we printed an incorrect timestamp
(always 2000-01-01) in the "recovery stopping before ... transaction"
log message. This is a consequence of sloppy refactoring in
c945af80c: the code to fetch recordXtime out of the commit/abort
record used to be executed unconditionally, but it was changed
to get called only in the RECOVERY_TARGET_TIME case. We need only
flip the order of operations to restore the intended behavior.
Per report from Torsten Förtsch. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/CAKkG4_kUevPqbmyOfLajx7opAQk6Cvwkvx0HRcFjSPfRPTXanA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is wrong since 88e9823, that has switched the WAL sizing
configuration from checkpoint_segments to min_wal_size and
max_wal_size. This missed the recalculation of the internal value of
the internal "CheckPointSegments", that works as a mapping of the old
GUC checkpoint_segments, on reload, for example, and it controls the
timing of checkpoints depending on the volume of WAL generated.
Most users tend to leave checkpoint_completion_target at 0.9 to smooth
the I/O workload, which is why I guess this has gone unnoticed for so
long, still it can be useful to tweak and reload the value dynamically
in some cases to control the timing of checkpoints.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACXgPPAm28mruojSBno+F_=9cTOOxHAywu_dfZPeBdybQw@mail.gmail.com
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
| |
No buildfarm members have reported that yet, but a recently-refreshed
Debian host did.
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/Y8ey5z4Nav62g4/K@paquier.xyz
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
test_extensions' test_ext_cine extension has the same upgrade hazard
as test_ext7: the regression test leaves it in an updated state
from which no downgrade path to default is provided. This causes
the update_extensions.sql script helpfully provided by pg_upgrade
to fail. So drop it in cross-version-upgrade testing.
Not entirely sure how come I didn't hit this in testing yesterday;
possibly I'd built the upgrade reference databases with
testmodules-install-check disabled.
Backpatch to v10 where this module was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To test pg_upgrade across major PG versions, we have to be able to
modify or drop any old objects with no-longer-supported properties,
and we have to be able to deal with cosmetic changes in pg_dump output.
Up to now, the buildfarm and pg_upgrade's own test infrastructure had
separate implementations of the former, and we had nothing but very
ad-hoc rules for the latter (including an arbitrary threshold on how
many lines of unchecked diff were okay!). This patch creates a Perl
module that can be shared by both those use-cases, and adds logic
that deals with pg_dump output diffs in a much more tightly defined
fashion.
This largely supersedes previous efforts in commits 0df9641d3,
9814ff550, and 62be9e4cd, which developed a SQL-script-based solution
for the task of dropping old objects. There was nothing fundamentally
wrong with that work in itself, but it had no basis for solving the
output-formatting problem. The most plausible way to deal with
formatting is to build a Perl module that can perform editing on the
dump files; and once we commit to that, it makes more sense for the
same module to also embed the knowledge of what has to be done for
dropping old objects.
Back-patch versions of the helper module as far as 9.2, to
support buildfarm animals that still test that far back.
It's also necessary to back-patch PostgreSQL/Version.pm,
because the new code depends on that. I fixed up pg_upgrade's
002_pg_upgrade.pl in v15, but did not look into back-patching
it further than that.
Tom Lane and Andrew Dunstan
Discussion: https://postgr.es/m/891521.1673657296@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Remove "%m" from error messages where errno would be bogus. Add short
read byte counts where appropriate.
This is equivalent to what was done in
7897e3bb902c557412645b82120f4d95f7474906, but some code was apparently
developed concurrently to that and not updated accordingly.
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f3501945-c591-8cc3-5ef0-b72a2e0eaa9c@enterprisedb.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit 8bf6ec3ba I assumed that no code path could reach
ExecGetExtraUpdatedCols without having gone through
ExecInitStoredGenerated. That turns out not to be the case in
logical replication: if there's an ON UPDATE trigger on the target
table, trigger.c will call this code before anybody has set up its
generated columns. Having seen that, I don't have a lot of faith in
there not being other such paths. ExecGetExtraUpdatedCols can call
ExecInitStoredGenerated for itself, as long as we are willing to
assume that it is only called in CMD_UPDATE operations, which on
the whole seems like a safer leap of faith.
Per report from Vitaly Davydov.
Discussion: https://postgr.es/m/d259d69652b8c2ff50e14cda3c236c7f@postgrespro.ru
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The WAIT_USE_EPOLL and WAIT_USE_KQUEUE implementations of
WaitEventSetWaitBlock() confused the size of their internal buffer with
the size of the caller's output buffer, and could ask the kernel for too
many events. In fact the set of events retrieved from the kernel needs
to be able to fit in both buffers, so take the smaller of the two.
The WAIT_USE_POLL and WAIT_USE WIN32 implementations didn't have this
confusion.
This probably didn't come up before because we always used the same
number in both places, but commit 7389aad6 calculates a dynamic size at
construction time, while using MAXLISTEN for its output event buffer on
the stack. That seems like a reasonable thing to want to do, so
consider this to be a pre-existing bug worth fixing.
As discovered by valgrind on skink.
Back-patch to all supported releases for epoll, and to release 13 for
the kqueue part, which copied the incorrect epoll code.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/901504.1673504836%40sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The current jsonpath code assumes that the referenced variable always exists.
It could only throw an error at the value valuation time. At the same time
existence checking assumes variable is present without valuation, and error
suppression doesn't work for missing variables.
This commit makes existense checking trigger an error for missing variables.
This makes the overall behavior consistent.
Backpatch to 12 where jsonpath was introduced.
Reported-by: David G. Johnston
Discussion: https://postgr.es/m/CAKFQuwbeytffJkVnEqDyLZ%3DrQsznoTh1OgDoOF3VmOMkxcTMjA%40mail.gmail.com
Author: Alexander Korotkov, David G. Johnston
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
After restart, we try to stream the changes for large transactions that
were not sent before server crash and restart. However, we forget to send
the abort message for such transactions. This leads to spurious streaming
files on the subscriber which won't be cleaned till the apply worker or
the subscriber server restarts.
Reported-by: Dilip Kumar
Author: Hou Zhijie
Reviewed-by: Dilip Kumar and Amit Kapila
Backpatch-through: 14
Discussion: https://postgr.es/m/OS0PR01MB5716A773F46768A1B75BE24394FB9@OS0PR01MB5716.jpnprd01.prod.outlook.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The ALTER DATABASE|FUNCTION|PROCEDURE|ROLE|ROUTINE|USER ... SET <name>
case in psql tab completion failed to exclude <name> = "SCHEMA", which
caused ALTER FUNCTION|PROCEDURE|ROUTINE ... SET SCHEMA to complete
with "FROM CURRENT" and "TO", which won't work.
Fix that, so that those cases now complete with the list of schemas,
like other ALTER ... SET SCHEMA commands.
Noticed while testing the recent patch to improve tab completion for
ALTER FUNCTION/PROCEDURE/ROUTINE, but this is not directly related to
that patch. Rather, this is a long-standing bug, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/CALDaNm0s7GQmkLP_mx5Cvk=UzYMnjhPmXBxU8DsHEunFbC5sTg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 57faaf376 added pg_truncate(const char *path, off_t length), but
"length" was ignored under WIN32 and the file was unconditionally
truncated to 0.
There was no live bug, since the only caller passes 0.
Fix, and back-patch to 14 where the function arrived.
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20230106031652.GR3109%40telsasoft.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We were identifying the updatable generated columns of inheritance
children by transposing the calculation made for their parent.
However, there's nothing that says a traditional-inheritance child
can't have generated columns that aren't there in its parent, or that
have different dependencies than are in the parent's expression.
(At present it seems that we don't enforce that for partitioning
either, which is likely wrong to some degree or other; but the case
clearly needs to be handled with traditional inheritance.)
Hence, drop the very-klugy-anyway "extraUpdatedCols" RTE field
in favor of identifying which generated columns depend on updated
columns during executor startup. In HEAD we can remove
extraUpdatedCols altogether; in back branches, it's still there but
always empty. Another difference between the HEAD and back-branch
versions of this patch is that in HEAD we can add the new bitmap field
to ResultRelInfo, but that would cause an ABI break in back branches.
Like 4b3e37993, add a List field at the end of struct EState instead.
Back-patch to v13. The bogus calculation is also being made in v12,
but it doesn't have the same visible effect because we don't use it
to decide which generated columns to recalculate; as a consequence of
which the patch doesn't apply easily. I think that there might still
be a demonstrable bug associated with trigger firing conditions, but
that's such a weird corner-case usage that I'm content to leave it
unfixed in v12.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqFshLKNvQUd1DgwJ-7tsTp=dwv7KZqXC4j2wYBV1aCDUA@mail.gmail.com
Discussion: https://postgr.es/m/2793383.1672944799@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
| |
While on it, newlines are removed from the end of two elog() strings.
The others are simple grammar mistakes. One comment in pg_upgrade
referred incorrectly to sequences since a7e5457.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20221230231257.GI1153@telsasoft.com
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
New versions of perl trigger warnings within perl.h with our compiler
flags. At least -Wdeclaration-after-statement, -Wshadow=compatible-local are
known to be problematic.
To avoid these warnings, conditionally use #pragma GCC system_header before
including plperl.h.
Alternatively, we could add the include paths for problematic headers with
-isystem, but that is a larger hammer and is harder to search for.
A more granular alternative would be to use #pragma GCC diagnostic
push/ignored/pop, but gcc warns about unknown warnings being ignored, so every
to-be-ignored-temporarily compiler warning would require its own pg_config.h
symbol and #ifdef.
As the warnings are voluminous, it makes sense to backpatch this change. But
don't do so yet, we first want gather buildfarm coverage - it's e.g. possible
that some compiler claiming to be gcc compatible has issues with the pragma.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: Discussion: https://postgr.es/m/20221228182455.hfdwd22zztvkojy2@awork3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When considering an empty grouping set, we fetched
phasedata->eqfunctions[-1]. Because the eqfunctions array is
palloc'd, that would always be an aset pointer in released versions,
and thus the code accidentally failed to malfunction (since it would
do nothing unless it found a null pointer). Nonetheless this seems
like trouble waiting to happen, so add a check for length == 0.
It's depressing that our valgrind testing did not catch this.
Maybe we should reconsider the choice to not mark that word NOACCESS?
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-vZuuPOZsKOYnSAaPYGKhmacxhki+vpOKk0O7rymccXQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When brin_minmax_multi_union merges summaries, we may end up with just a
single range after merge_overlapping_ranges. The summaries may contain
just one range each, and they may overlap (or be exactly the same).
With a single range there's no distance to calculate, but we happen to
call build_distances anyway - which is fine, we don't calculate the
distance in this case, except that with asserts this failed due to a
check there are at least two ranges.
The assert is unnecessarily strict, so relax it a bit and bail out if
there's just a single range. The relaxed assert would be enough, but
this way we don't allocate unnecessary memory for distance.
Backpatch to 14, where minmax-multi opclasses were introduced.
Reported-by: Jaime Casanova
Backpatch-through: 14
Discussion: https://postgr.es/m/YzVA55qS0hgz8P3r@ahch-to
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The query used to disable WITH OIDS in all the relations making use of
it was checking for materialized views, but this is not a supported
operation. On the contrary, this needs to be done on foreign tables.
While on it, use quote_ident() in the ALTER TABLE strings built on the
relation name.
Author: Anton A. Melnikov, Michael Paquier
Discussion: https://postgr.es/m/49f389ba-95ce-8a9b-09ae-f60650c0e7c7@inbox.ru
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Three error strings used with cache lookup failures were referring to
incorrect object types for ACL checks:
- Schemas
- Types
- Foreign Servers
There errors should never be triggered, but if they do incorrect
information would be reported.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20221222153041.GN1153@telsasoft.com
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Andrey Lepikhov demonstrated a case where we spend an unreasonable
amount of time in pull_up_subqueries(). Not only is that recursing
with no explicit check for stack overrun, but the code seems not
interruptable by control-C. Let's stick a CHECK_FOR_INTERRUPTS
there, along with sprinkling some stack depth checks.
An actual fix for the excessive time consumption seems a bit
risky to back-patch; but this isn't, so let's do so.
Discussion: https://postgr.es/m/703c09a2-08f3-d2ec-b33d-dbecd62428b8@postgrespro.ru
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Such references failed with "cache lookup failed for type 0"
because we didn't resolve the type of the CYCLE column until after
analyzing the CTE's query. We can just move that processing
to before the recursive parse_sub_analyze call, though.
While here, invent a couple of local variables to make this
code less egregiously wider-than-80-columns.
Per bug #17723 from Vik Fearing. Back-patch to v14 where
the CYCLE feature was added.
Discussion: https://postgr.es/m/17723-2c4985ff111e7bba@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It seems that drop-index-concurrently-1 has started to forget what it was
originally meant to be testing. d2d8a229b, which added incremental sorts
changed the expected plan to be an Index Scan plan instead of a Seq Scan
plan. This occurred as the primary key index of the table in question
provided presorted input and, because that index happened to be the
cheapest input path due to enable_seqscan being disabled, the incremental
sort changes just added a Sort on top of that. It seems based on the name
of the PREPAREd statement that the intention here is that the query
produces a seqscan plan.
The reason this test has become broken seems to be due to how the test was
originally coded. The test was trying to force a seqscan plan by
performing some casting to make it so the test_dc index couldn't be used
to perform the required filtering. Trying to coax the planner into using
a plan which has costed in a disable_cost seems like it's always going to
be flakey as small changes in costs are drowned out by the large
disable_cost combined with add_path's STD_FUZZ_FACTOR. Here we get rid of
the casts that we're using to try to trick the planner into a seqscan and
instead toggle enable_seqscan as and when required to get the desired
plan.
Additionally, rename a few things in the test and add some additional
wording to the comments to try and make it more clear in the future what
we expect this test to be doing.
Discussion: https://postgr.es/m/CAApHDvrbDhObhLV+=U_K_-t+2Av2av1aL9d+2j_3AO-XndaviA@mail.gmail.com
Backpatch-through: 13, where d2d8a229b changed the expected test output
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commits f92944137 et al. made IsInTransactionBlock() set the
XACT_FLAGS_NEEDIMMEDIATECOMMIT flag before returning "false",
on the grounds that that kept its API promises equivalent to those of
PreventInTransactionBlock(). This turns out to be a bad idea though,
because it allows an ANALYZE in a pipelined series of commands to
cause an immediate commit, which is unexpected.
Furthermore, if we return "false" then we have another issue,
which is that ANALYZE will decide it's allowed to do internal
commit-and-start-transaction sequences, thus possibly unexpectedly
committing the effects of previous commands in the pipeline.
To fix the latter situation, invent another transaction state flag
XACT_FLAGS_PIPELINING, which explicitly records the fact that we
have executed some extended-protocol command and not yet seen a
commit for it. Then, require that flag to not be set before allowing
InTransactionBlock() to return "false".
Having done that, we can remove its setting of NEEDIMMEDIATECOMMIT
without fear of causing problems. This means that the API guarantees
of IsInTransactionBlock now diverge from PreventInTransactionBlock,
which is mildly annoying, but it seems OK given the very limited usage
of IsInTransactionBlock. (In any case, a caller preferring the old
behavior could always set NEEDIMMEDIATECOMMIT for itself.)
For consistency also require XACT_FLAGS_PIPELINING to not be set
in PreventInTransactionBlock. This too is meant to prevent commands
such as CREATE DATABASE from silently committing previous commands
in a pipeline.
Per report from Peter Eisentraut. As before, back-patch to all
supported branches (which sadly no longer includes v10).
Discussion: https://postgr.es/m/65a899dd-aebc-f667-1d0a-abb89ff3abf8@enterprisedb.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
jsonb_get_element() was incautious enough to use VARDATA() and
VARSIZE() directly on an arbitrary text Datum. That of course
fails if the Datum is short-header, compressed, or out-of-line.
The typical result would be failing to match any element of a
jsonb object, though matching the wrong one seems possible as well.
setPathObject() was slightly brighter, in that it used VARDATA_ANY
and VARSIZE_ANY_EXHDR, but that only kept it out of trouble for
short-header Datums. push_path() had the same issue. This could
result in faulty subscripted insertions, though keys long enough to
cause a problem are likely rare in the wild.
Having seen these, I looked around for unsafe usages in the rest
of the adt/json* files. There are a couple of places where it's not
immediately obvious that the Datum can't be compressed or out-of-line,
so I added pg_detoast_datum_packed() to cope if it is. Also, remove
some other usages of VARDATA/VARSIZE on Datums we just extracted from
a text array. Those aren't actively broken, but they will become so
if we ever start allowing short-header array elements, which does not
seem like a terribly unreasonable thing to do. In any case they are
not great coding examples, and they could also do with comments
pointing out that we're assuming we don't need pg_detoast_datum_packed.
Per report from exe-dealer@yandex.ru. Patch by me, but thanks to
David Johnston for initial investigation. Back-patch to v14 where
jsonb subscripting was introduced.
Discussion: https://postgr.es/m/205321670615953@mail.yandex.ru
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit ffbb7e65a, I added a ModifyTableState member to ResultRelInfo
to save the owning ModifyTableState for use by nodeModifyTable.c when
performing batch inserts, but as pointed out by Tom Lane, that changed
the array stride of es_result_relations, and that would break any
previously-compiled extension code that accesses that array. Fix by
removing that member from ResultRelInfo and instead adding a List member
at the end of EState to save such ModifyTableStates.
Per report from Tom Lane. Back-patch to v14, like the previous commit;
I chose to apply the patch to HEAD as well, to make back-patching easy.
Discussion: http://postgr.es/m/4065383.1669395453%40sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
| |
A couple of places weren't up to speed for this. By sheer good
luck, we didn't fail but just selected a non-memoized join plan,
at least in the test case we have. Nonetheless, it's a bug,
and I'm not quite sure that it couldn't have worse consequences
in other examples. So back-patch to v14 where Memoize came in.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs48GkNom272sfp0-WeD6_0HSR19BJ4H1c9ZKSfbVnJsvRg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
It neglected to recurse to the subpath, meaning you'd get back
a path identical to the input. This could produce wrong query
results if the omission meant that the subpath fails to enforce
some join clause it should be enforcing. We don't have a test
case for this at the moment, but the code is obviously broken
and the fix is equally obvious. Back-patch to v14 where
Memoize was introduced.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_R=ORpz=Lkn2q3ebPC5EuWyfZF+tmfCPVLBVK5W39mHA@mail.gmail.com
|
