| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
| |
Move the code that sends the initial status information as well as the
calculation of paths inside the ENSURE_ERROR_CLEANUP block. If this code
failed, we would "leak" a counter of number of concurrent backups, thereby
making the system always believe it was in backup mode. This could happen
if the sending failed (which it probably never did given that the small
amount of data to send would never cause a flush) or if the psprintf calls
ran out of memory. Both are very low risk, but all operations after
do_pg_start_backup should be protected.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In general it's not a good idea for built-in types in the 'U' category
to be marked preferred; they could draw behavior away from user-defined
types with similarly-named operators. pg_lsn is probably at low risk
of that right now given the lack of casts between it and other types,
but that doesn't make this marking OK.
Ordinarily we'd bump catversion when changing any predefined catalog
contents like this, but since we're past beta1, the costs of a forced
initdb seem to outweigh the benefits of guaranteed behavioral consistency.
There's not any known behavioral impact today anyway --- this is more
in the nature of being sure there's not problems in future.
Per an off-list complaint from Thomas Fanghaenel.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The recent addition of regression tests to uuid-ossp exposed the fact
that the MSVC build system wasn't being consistent about whether it was
building/testing that contrib module, ie, it would try to test the module
even when it hadn't built it. The same hazard was latent for sslinfo.
For the moment I just copied the more up-to-date logic from point A to
point B, but this is screaming for refactoring.
Per buildfarm results.
|
| |
|
|
|
|
| |
Commit 5035701e07e8bd395aa878465a102afd7b74e8c3 improved xlog.c's method
for creating a database system identifier, but I neglected to fix the
copy of that code appearing in pg_resetxlog.c. Spotted by Andres Freund.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Allow the contrib/uuid-ossp extension to be built atop any one of these
three popular UUID libraries. (The extension's name is now arguably a
misnomer, but we'll keep it the same so as not to cause unnecessary
compatibility issues for users.)
We would not normally consider a change like this post-beta1, but the issue
has been forced by our upgrade to autoconf 2.69, whose more rigorous header
checks are causing OSSP's header files to be rejected on some platforms.
It's been foreseen for some time that we'd have to move away from depending
on OSSP UUID due to lack of upstream maintenance, so this is a down payment
on that problem.
While at it, add some simple regression tests, in hopes of catching any
major incompatibilities between the three implementations.
Matteo Beccati, with some further hacking by me
|
| |
|
|
|
|
|
|
|
| |
The bug was caused by omitting 'I:' from the short argument list to
getopt_long(). To make similar bugs in the future less likely reorder
options in --help, long and short option lists to be in the same,
alphabetical within groups, order.
Report and fix by Michael Paquier, some additional reordering by me.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The new page deletion code didn't cope with the case the target page's
right sibling was marked half-dead. It failed a sanity check which checked
that the downlinks in the parent page match the lower level, because a
half-dead page has no downlink. To cope, check for that condition, and
just give up on the deletion if it happens. The vacuum will finish the
deletion of the half-dead page when it gets there, and on the next vacuum
after that the empty can be deleted.
Reported by Jeff Janes.
|
| |
|
|
|
|
|
|
|
|
|
| |
HeapTupleHeaderGetCmax() asserts that it is only used if the tuple has
been updated by the current transaction. That check is correct and
sensible but requires allocating memory if xmax is a multixact. When
wal_level is set to logical cmax needs to be included in a wal record
, generated inside a critical section, which can trigger the assertion
added in 4a170ee9e.
Reported-By: Steve Singer
|
| |
|
|
|
|
|
|
|
|
| |
Define padding bytes in SharedInvalidationMessage structs to be
defined. Otherwise the sinvaladt.c ringbuffer, which is accessed by
multiple processes, will cause spurious valgrind warnings about
undefined memory being used. That's because valgrind remembers the
undefined bytes from the last local process's store, not realizing
that another process has written since, filling the previously
uninitialized bytes.
|
| | |
|
| |
|
|
|
|
|
| |
This is all inside a block guarded by op == DSM_OP_ATTACH, so it can
never be the case that op == DSM_OP_CREATE.
Reported by Coverity.
|
| |
|
|
| |
Erik Rijkers
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit af7914c6627bcf0b0ca614e9ce95d3f8056602bf, which introduced the
EXPLAIN (TIMING) option, for some reason coded explain.c to look at
planstate->instrument->need_timer rather than es->timing to decide
whether to print timing info. However, the former flag might get set
as a result of contrib/auto_explain wanting timing information. We
certainly don't want activation of auto_explain to change user-visible
statement behavior, so fix that.
Also fix an independent bug introduced in the same patch: in the code
path for a never-executed node with a machine-friendly output format,
if timing was selected, it would fail to print the Actual Rows and Actual
Loops items.
Per bug #10404 from Tomonari Katsumata. Back-patch to 9.2 where the
faulty code was introduced.
|
| |
|
|
| |
Peter Geoghegan
|
| |
|
|
|
|
|
| |
Lowercase help statements. Use an existing message to reduce the number
of strings to be translated.
Euler Taveira
|
| |
|
|
|
|
|
|
|
|
|
|
| |
I got the backup block numbers off-by-one in the commit that changed the
way incomplete-splits are handled. I blame the comments, which said
"backup block 1" and "backup block 2", even though the backup blocks
are numbered starting from 0, in the macros and functions used in replay.
Fix the comments and the code.
Per Jeff Janes' bug report about corruption caused by torn page writes.
The incorrect code is new in git master, but backpatch the comment change
down to 9.0, where the numbering in the redo-side macros was changed.
|
| |
|
|
|
|
| |
That's what I get for not fully retesting the final version of the patch.
The replace_allowed cross-check needs an additional special case for
bootstrapping.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
RelationCacheInsert() ignored the possibility that hash_search(HASH_ENTER)
might find a hashtable entry already present for the same OID. However,
that can in fact occur during recursive relcache load scenarios. When it
did happen, we overwrote the pointer to the pre-existing Relation, causing
a session-lifespan leakage of that entire structure. As far as is known,
the pre-existing Relation would always have reference count zero by the
time we arrive back at the outer insertion, so add code that deletes the
pre-existing Relation if so. If by some chance its refcount is positive,
elog a WARNING and allow the pre-existing Relation to be leaked as before.
Also, AttrDefaultFetch() was sloppy about leaking the cstring form of the
pg_attrdef.adbin value it's copying into the relcache structure. This is
only a query-lifespan leakage, and normally not very significant, but it
adds up during CLOBBER_CACHE testing.
These bugs are of very ancient vintage, but I'll refrain from back-patching
since there's no evidence that these leaks amount to anything in ordinary
usage.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The fallback implementation involves acquiring and releasing a spinlock
variable that is otherwise unreferenced --- not even to the extent of
initializing it. This accidentally fails to fail on platforms where
spinlocks should be initialized to zeroes, but elsewhere it results in
a "stuck spinlock" failure during startup.
I griped about this last July, and put in a hack that worked for gcc
on HPPA, but didn't get around to fixing the general case. Per the
discussion back then, the best thing to do seems to be to initialize
dummy_spinlock in main.c.
|
| |
|
|
| |
Per testing with a compiler that whines about this.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The xl_heap_header_len structures in an XLOG_HEAP_UPDATE record aren't
necessarily aligned adequately. The regular replay function for these
records is aware of that, but decode.c didn't get the memo. I'm not
sure why the buildfarm failed to catch this; the test_decoding test
certainly blows up real good on my old HPPA box.
Also, I'm pretty sure that the address arithmetic was wrong for the
case of XLOG_HEAP_CONTAINS_OLD and not XLOG_HEAP_CONTAINS_NEW_TUPLE,
though this apparently can't happen when logical decoding is active.
|
| |
|
|
|
|
|
| |
transam/README explained how B-tree incomplete splits were tracked and
fixed after recovery, as an example of handling complex actions that need
multiple WAL records, but that's not how it works anymore. Explain the new
paradigm.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Several years ago we changed chr(int) so that if the database encoding is
UTF8, it would interpret its argument as a Unicode code point and expand it
into the appropriate multibyte sequence. However, we weren't sufficiently
careful about checking validity of the input. According to RFC3629, UTF8
disallows code points above U+10FFFF (note that the predecessor standard
RFC2279 was more liberal). Also, both versions of the UTF8 spec agree
that Unicode surrogate-pair codes should never appear in UTF8. Because
our encoding validity checks follow RFC3629, our failure to enforce these
restrictions in chr() means it could be used to produce text strings that
will be rejected when the database is dumped and reloaded. To ensure
consistency with the input functions, let's actually apply
pg_utf8_islegal() to the proposed output of chr().
Per discussion, this seems like too much of a behavioral change to
back-patch, but it's not too late to squeeze it into 9.4.
|
| |
|
|
|
|
|
| |
The decoding of prepared transaction commits accidentally used the XID of
the transaction performing the COMMIT PREPARED, not the XID of the prepared
transaction. Before bb38fb0d43c8d that lead to those transactions not being
decoded, afterwards to a assertion failure.
|
| |
|
|
|
|
| |
Let's complain about e.g an invalid path or permission problem sooner rather
than later. Before this patch, we would only try to open the output file
after receiving the first decoded message from the server.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit dd428c79 added dbId and tsId to the xl_xact_commit struct but missed
that prepared transaction commits reuse that struct. Fix that.
Because those fields were left unitialized, replaying a commit prepared WAL
record in a hot standby node would fail to remove the relcache init file.
That can lead to "could not open file" errors on the standby. Relcache init
file only needs to be removed when a system table/index is rewritten in the
transaction using two phase commit, so that should be rare in practice. In
HEAD, the incorrect dbId/tsId values are also used for filtering in logical
replication code, causing the transaction to always be filtered out.
Analysis and fix by Andres Freund. Backpatch to 9.0 where hot standby was
introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
In yesterday's commit 2dc4f011fd61501cce507be78c39a2677690d44b, I tried
to force buffering of stdout/stderr in initdb to be what it is by
default when the program is run interactively on Unix (since that's how
most manual testing is done). This tripped over the fact that Windows
doesn't support _IOLBF mode. We dealt with that a long time ago in
syslogger.c by falling back to unbuffered mode on Windows. Export that
solution in port.h and use it in initdb.
Back-patch to 8.4, like the previous commit.
|
| |
|
|
|
|
|
| |
Don't close stdout on SIGHUP. Also, when a SIGHUP is received, close the
file immediately, rather than only after receiving some more data from
the server. Rename a variable, to avoid mentally dealing with double
negatives (not unsynced means synced).
|
| |
|
|
|
|
|
|
|
|
| |
The proc array can contain duplicate XIDs, when a transaction is just being
prepared for two-phase commit. To cope, remove any duplicates in
txid_current_snapshot(). Also ignore duplicates in the input functions, so
that if e.g. you have an old pg_dump file that already contains duplicates,
it will be accepted.
Report and fix by Jan Wieck. Backpatch to all supported versions.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To lock a prepared transaction's shared memory entry, we used to mark it
with the XID of the backend. When the XID was no longer active according
to the proc array, the entry was implicitly considered as not locked
anymore. However, when preparing a transaction, the backend's proc array
entry was cleared before transfering the locks (and some other state) to
the prepared transaction's dummy PGPROC entry, so there was a window where
another backend could finish the transaction before it was in fact fully
prepared.
To fix, rewrite the locking mechanism of global transaction entries. Instead
of an XID, just have simple locked-or-not flag in each entry (we store the
locking backend's backend id rather than a simple boolean, but that's just
for debugging purposes). The backend is responsible for explicitly unlocking
the entry, and to make sure that that happens, install a callback to unlock
it on abort or process exit.
Backpatch to all supported versions.
|
| |
|
|
| |
Euler Taveira
|
| |
|
|
|
| |
Mingw-w64 headers map popen/pclose to _popen and _pclose, but we want to use
our popen wrapper rather than the Mingw-w64. #undef the Mingw's version.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since this program may print to either stdout or stderr, the relative
ordering of its messages depends on the buffering behavior of those files.
Force stdout to be line-buffered and stderr to be unbuffered, ensuring
that the behavior will match standard Unix interactive behavior, even
when stdout and stderr are rerouted to a file.
Per complaint from Tomas Vondra. The particular case he pointed out is
new in HEAD, but issues of the same sort could arise in any branch with
other error messages, so back-patch to all branches.
I'm unsure whether we might not want to do this in other client programs
as well. For the moment, just fix initdb.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
rd_replidindex should be managed the same as rd_oidindex, and rd_keyattr
and rd_idattr should be managed like rd_indexattr. Omissions in this area
meant that the bitmapsets computed for rd_keyattr and rd_idattr would be
leaked during any relcache flush, resulting in a slow but permanent leak in
CacheMemoryContext. There was also a tiny probability of relcache entry
corruption if we ran out of memory at just the wrong point in
RelationGetIndexAttrBitmap. Otherwise, the fields were not zeroed where
expected, which would not bother the code any AFAICS but could greatly
confuse anyone examining the relcache entry while debugging.
Also, create an API function RelationGetReplicaIndex rather than letting
non-relcache code be intimate with the mechanisms underlying caching of
that value (we won't even mention the memory leak there).
Also, fix a relcache flush hazard identified by Andres Freund:
RelationGetIndexAttrBitmap must not assume that rd_replidindex stays valid
across index_open.
The aspects of this involving rd_keyattr date back to 9.3, so back-patch
those changes.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Historically we've printed a complaint for a bad locale setting, but then
fallen back to the environment default. Per discussion, this is not such
a great idea, because rectifying an erroneous locale choice post-initdb
(perhaps long after data has been loaded) could be enormously expensive.
Better to complain and give the user a chance to double-check things.
The behavior was particularly bad if the bad setting came from environment
variables rather than a bogus command-line switch: in that case not only
was there a fallback to C/SQL_ASCII, but the printed complaint was quite
unhelpful. It's hard to be entirely sure what variables setlocale looked
at, but we can at least give a hint where the problem might be.
Per a complaint from Tomas Vondra.
|
| |
|
|
|
|
|
|
|
| |
When cache invalidations arrive while ri_LoadConstraintInfo() is busy
filling a new cache entry, InvalidateConstraintCacheCallBack() compares
the - not yet initialized - oidHashValue field with the to-be-invalidated
hash value. To fix, check whether the entry is already marked as invalid.
Andres Freund
|
| |
|
|
| |
Andres Freund
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
America/Metlakatla hasn't been in the IANA database all that long, so
some installations might not have it. It does seem worthwhile to test
with a fractional-minute GMT offset, but we can get that from almost
any pre-1900 date; I chose Europe/Paris, whose LMT offset from Greenwich
should be pretty darn well established.
Also, assuming that Mars/Mons_Olympus will never be in the IANA database
seems less than future-proof, so let's use a more fanciful location for
the bad-zone-name check.
Per complaint from Christoph Berg.
|
| |
|
|
|
|
|
|
|
| |
config.pl and buildenv.pl can be used to customize build settings when
using MSVC. They should never get committed into the common source tree.
Back-patch to 9.0; it looks like the rules were different in 8.4.
Michael Paquier
|
| |
|
|
|
|
|
|
| |
The leak is fairly small and rare, but a leak nevertheless.
Per Coverity report. Backpatch to 9.2, where pg_receivexlog was added.
pg_basebackup shares the code, but it always exits on error, so there is
no real leak.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The original coding for ALTER SYSTEM made a fundamentally bogus assumption
that postgresql.auto.conf could be sought relative to the main config file
if we hadn't yet determined the value of data_directory. This fails for
common arrangements with the config file elsewhere, as reported by
Christoph Berg.
The simplest fix is to not try to read postgresql.auto.conf until after
SelectConfigFiles has chosen (and locked down) the data_directory setting.
Because of the logic in ProcessConfigFile for handling resetting of GUCs
that've been removed from the config file, we cannot easily read the main
and auto config files separately; so this patch adopts a brute force
approach of reading the main config file twice during postmaster startup.
That's a tad ugly, but the actual time cost is likely to be negligible,
and there's no time for a more invasive redesign before beta.
With this patch, any attempt to set data_directory via ALTER SYSTEM
will be silently ignored. It would probably be better to throw an
error, but that can be dealt with later. This bug, however, would
prevent any testing of ALTER SYSTEM by a significant fraction of the
userbase, so it seems important to get it fixed before beta.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
There's no longer much pressure to switch the default GIN opclass for
jsonb, but there was still some unhappiness with the name "jsonb_hash_ops",
since hashing is no longer a distinguishing property of that opclass,
and anyway it seems like a relatively minor detail. At the suggestion of
Heikki Linnakangas, we'll use "jsonb_path_ops" instead; that captures the
important characteristic that each index entry depends on the entire path
from the document root to the indexed value.
Also add a user-facing explanation of the implementation properties of
these two opclasses.
|
| | |
|
| |
|
|
|
|
|
| |
Per discussion, this seems like a more consistent choice of name.
FabrÃzio de Royes Mello, after a suggestion by Peter Eisentraut;
some additional documentation wordsmithing by me
|
