| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
0ac5ad5 started to compress infomask bits in WAL records. Unfortunately
the replay routines for XLOG_HEAP_LOCK/XLOG_HEAP2_LOCK_UPDATED forgot to
reset the HEAP_XMAX_INVALID (and some other) hint bits.
Luckily that's not problematic in the majority of cases, because after a
crash/on a standby row locks aren't meaningful. Unfortunately that does
not hold true in the presence of prepared transactions. This means that
after a crash, or after promotion, row level locks held by a prepared,
but not yet committed, prepared transaction might not be enforced.
Discussion: 20160715192319.ubfuzim4zv3rqnxv@alap3.anarazel.de
Backpatch: 9.3, the oldest branch on which 0ac5ad5 is present.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We must not push down a foreign join when the foreign tables involved
should be accessed under different user mappings. Previously we tried
to enforce that rule literally during planning, but that meant that the
resulting plans were dependent on the current contents of the
pg_user_mapping catalog, and we had to blow away all cached plans
containing any remote join when anything at all changed in pg_user_mapping.
This could have been improved somewhat, but the fact that a syscache inval
callback has very limited info about what changed made it hard to do better
within that design. Instead, let's change the planner to not consider user
mappings per se, but to allow a foreign join if both RTEs have the same
checkAsUser value. If they do, then they necessarily will use the same
user mapping at runtime, and we don't need to know specifically which one
that is. Post-plan-time changes in pg_user_mapping no longer require any
plan invalidation.
This rule does give up some optimization ability, to wit where two foreign
table references come from views with different owners or one's from a view
and one's directly in the query, but nonetheless the same user mapping
would have applied. We'll sacrifice the first case, but to not regress
more than we have to in the second case, allow a foreign join involving
both zero and nonzero checkAsUser values if the nonzero one is the same as
the prevailing effective userID. In that case, mark the plan as only
runnable by that userID.
The plancache code already had a notion of plans being userID-specific,
in order to support RLS. It was a little confused though, in particular
lacking clarity of thought as to whether it was the rewritten query or just
the finished plan that's dependent on the userID. Rearrange that code so
that it's clearer what depends on which, and so that the same logic applies
to both RLS-injected role dependency and foreign-join-injected role
dependency.
Note that this patch doesn't remove the other issue mentioned in the
original complaint, which is that while we'll reliably stop using a foreign
join if it's disallowed in a new context, we might fail to start using a
foreign join if it's now allowed, but we previously created a generic
cached plan that didn't use one. It was agreed that the chance of winning
that way was not high enough to justify the much larger number of plan
invalidations that would have to occur if we tried to cause it to happen.
In passing, clean up randomly-varying spelling of EXPLAIN commands in
postgres_fdw.sql, and fix a COSTS ON example that had been allowed to
leak into the committed tests.
This reverts most of commits fbe5a3fb7 and 5d4171d1c, which were the
previous attempt at ensuring we wouldn't push down foreign joins that
span permissions contexts.
Etsuro Fujita and Tom Lane
Discussion: <d49c1e5b-f059-20f4-c132-e9752ee0113e@lab.ntt.co.jp>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When key-share locking a tuple that has been not-key-updated, and the
update is a committed transaction, in some cases we raised
serializability errors:
ERROR: could not serialize access due to concurrent update
Because the key-share doesn't conflict with the update, the error is
unnecessary and inconsistent with the case that the update hasn't
committed yet. This causes problems for some usage patterns, even if it
can be claimed that it's sufficient to retry the aborted transaction:
given a steady stream of updating transactions and a long locking
transaction, the long transaction can be starved indefinitely despite
multiple retries.
To fix, we recognize that HeapTupleSatisfiesUpdate can return
HeapTupleUpdated when an updating transaction has committed, and that we
need to deal with that case exactly as if it were a non-committed
update: verify whether the two operations conflict, and if not, carry on
normally. If they do conflict, however, there is a difference: in the
HeapTupleBeingUpdated case we can just sleep until the concurrent
transaction is gone, while in the HeapTupleUpdated case this is not
possible and we must raise an error instead.
Per trouble report from Olivier Dony.
In addition to a couple of test cases that verify the changed behavior,
I added a test case to verify the behavior that remains unchanged,
namely that errors are raised when a update that modifies the key is
used. That must still generate serializability errors. One
pre-existing test case changes behavior; per discussion, the new
behavior is actually the desired one.
Discussion: https://www.postgresql.org/message-id/560AA479.4080807@odoo.com
https://www.postgresql.org/message-id/20151014164844.3019.25750@wrigleys.postgresql.org
Backpatch to 9.3, where the problem appeared.
|
| |
|
|
|
|
|
| |
Digging around bug #14245 I found that commit
6734a1cacd44f5b731933cbc93182b135b167d0c missed that NOT operation is
right associative in opposite to all other. This miss is resposible for
tsquery parser fail on sequence of NOT operations
|
| |
|
|
|
|
|
|
|
| |
During normalization of tsquery tree it tries to simplify nested NOT
operations but there it's obvioulsy missed that subsequent node could be
a leaf node (value node)
Bug #14245: Segfault on weird to_tsquery
Reported by David Kellum.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GiST index build could go into an infinite loop when presented with boxes
(or points, circles or polygons) containing NaN component values. This
happened essentially because the code assumed that x == x is true for any
"double" value x; but it's not true for NaNs. The looping behavior was not
the only problem though: we also attempted to sort the items using simple
double comparisons. Since NaNs violate the trichotomy law, qsort could
(in principle at least) get arbitrarily confused and mess up the sorting of
ordinary values as well as NaNs. And we based splitting choices on box size
calculations that could produce NaNs, again resulting in undesirable
behavior.
To fix, replace all comparisons of doubles in this logic with
float8_cmp_internal, which is NaN-aware and is careful to sort NaNs
consistently, higher than any non-NaN. Also rearrange the box size
calculation to not produce NaNs; instead it should produce an infinity
for a box with NaN on one side and not-NaN on the other.
I don't by any means claim that this solves all problems with NaNs in
geometric values, but it should at least make GiST index insertion work
reliably with such data. It's likely that the index search side of things
still needs some work, and probably regular geometric operations too.
But with this patch we're laying down a convention for how such cases
ought to behave.
Per bug #14238 from Guang-Dih Lei. Back-patch to 9.2; the code used before
commit 7f3bd86843e5aad8 is quite different and doesn't lock up on my simple
test case, nor on the submitter's dataset.
Report: <20160708151747.1426.60150@wrigleys.postgresql.org>
Discussion: <28685.1468246504@sss.pgh.pa.us>
|
| |
|
|
|
|
| |
pg_xlogdump doesn't have any other mode, so it's just confusing to
include this in the error message as it indicates there might be another
mode.
|
| |
|
|
|
|
| |
Dept of second thoughts: given the RESET SESSION AUTHORIZATION that
was just added by commit cec550139, we don't need the reconnection
that used to be here. Might as well buy back a few microseconds.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Test the external-sort code path in CLUSTER for two different scenarios:
multiple-pass external sorting, and the best case for replacement
selection, where only one run is produced, so that no merge is required.
This test would have caught the bug fixed in commit 1b0fc8507, at
least when run with valgrind enabled.
In passing, add a short-circuit test in plan_cluster_use_sort() to make
dead certain that it selects sorting when enable_indexscan is off. As
things stand, that would happen anyway, but it seems like good future
proofing for this test.
Peter Geoghegan
Discussion: <CAM3SWZSgxehDkDMq1FdiW2A0Dxc79wH0hz1x-TnGy=1BXEL+nw@mail.gmail.com>
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since IMPORT FOREIGN SCHEMA has an INTO clause, pl/pgsql needs to be
aware of that and avoid capturing the INTO as an INTO-variables clause.
This isn't hard, though it's annoying to have to make IMPORT a plpgsql
keyword just for this. (Fortunately, we have the infrastructure now
to make it an unreserved keyword, so at least this shouldn't break any
existing pl/pgsql code.)
Per report from Merlin Moncure. Back-patch to 9.5 where IMPORT FOREIGN
SCHEMA was introduced.
Report: <CAHyXU0wpHf2bbtKGL1gtUEFATCY86r=VKxfcACVcTMQ70mCyig@mail.gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We have, for a very long time, allowed the same subplan (same member of the
PlannedStmt.subplans list) to be referenced by more than one SubPlan node;
this avoids problems for cases such as subplans within an IndexScan's
indxqual and indxqualorig fields. However, EXPLAIN had not gotten the memo
and would print each reference as though it were an independent identical
subplan. To fix, track plan_ids of subplans we've printed and don't print
the same plan_id twice. Per report from Pavel Stehule.
BTW: the particular case of IndexScan didn't cause visible duplication
in a plain EXPLAIN, only EXPLAIN ANALYZE, because in the former case we
short-circuit executor startup before the indxqual field is processed by
ExecInitExpr. That seems like it could easily lead to other EXPLAIN
problems in future, but it's not clear how to avoid it without breaking
the "EXPLAIN a plan using hypothetical indexes" use-case. For now I've
left that issue alone.
Although this is a longstanding bug, it's purely cosmetic (no great harm
is done by the repeat printout) and we haven't had field complaints before.
So I'm hesitant to back-patch it, especially since there is some small risk
of ABI problems due to the need to add a new field to ExplainState.
In passing, rearrange order of fields in ExplainState to be less random,
and update some obsolete comments about when/where to initialize them.
Report: <CAFj8pRAimq+NK-menjt+3J4-LFoodDD8Or6=Lc_stcFD+eD4DA@mail.gmail.com>
|
| |
|
|
|
|
|
|
|
|
| |
Add display of proparallel (parallel-safety) when the server is >= 9.6,
and display of proacl (access privileges) for all server versions.
Minor tweak of column ordering to keep related columns together.
Michael Paquier
Discussion: <CAB7nPqTR3Vu3xKOZOYqSm-+bSZV0kqgeGAXD6w5GLbkbfd5Q6w@mail.gmail.com>
|
| | |
|
| |
|
|
|
|
|
|
|
|
| |
On a standby, ThisTimelineID is always 0, so we would generate a
filename in timeline 0 even for other timelines. Instead, use starttli
which we have retreived from the controlfile.
Report by: Francesco Canovai in bug #14230
Author: Marco Nenciarini
Reviewed by: Michael Paquier and Amit Kapila
|
| |
|
|
|
|
|
| |
This reverts commit 88cf37d2a86d5b66380003d7c3384530e3f91e40 as well
as follow-on commits ea9c4a16d5ad88a1d28d43ef458e3209b53eb106 and
c57562725d219c4249b82f4a4fb5aaeee3ae0d53. We've learned about as much
as we can from the buildfarm.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change assorted places in our Perl code that did things like
system("prog $path/file");
to do it more like
system('prog', "$path/file");
which is safe against spaces and other special characters in the path
variable. The latter was already the prevailing style, but a few bits
of code hadn't gotten this memo. Back-patch to 9.4 as relevant.
Michael Paquier, Kyotaro Horiguchi
Discussion: <20160704.160213.111134711.horiguchi.kyotaro@lab.ntt.co.jp>
|
| |
|
|
|
|
|
|
| |
Examination of the results from anole and gharial suggests that we're
only managing to track the size of one of the two stacks of IA64 machines.
Some googling gave the answer: on HPUX11, the register stack is reported
as a page type I don't see in pstat.h on my HPUX10 box. Let's try
testing for that.
|
| |
|
|
|
|
|
|
| |
After a look at preliminary results from commit 88cf37d2a86d5b66,
I realized it'd be a good idea to spew out the maximum depth measurement
seen by check_stack_depth. So add some quick-n-dirty code to do that.
Like the previous commit, this will be reverted once we've gathered
a set of buildfarm runs with it.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This patch is meant to gather information from the buildfarm members, and
will be reverted in a day or so. The idea is to try to find out the
high-water stack consumption while running the regression tests,
particularly on IA64 which is suspected to use much more stack than other
architectures. On machines with pmap, we can use that; but the IA64 farm
members are running HPUX, so also include some bespoke code for HPUX.
(I've tested the latter on HPUX 10/HPPA; not entirely sure it will work
on HPUX 11/IA64, but we'll soon find out.)
Discussion: <CAM-w4HMwwcwaVvYcAH0_FGtG5GeXdYVRfvG81pXnSJWHnCfosQ@mail.gmail.com>
|
| |
|
|
| |
Amit Langote
|
| |
|
|
|
|
|
|
| |
Otherwise, when we abandon incremental memory accounting and use
batch allocation for the final merge pass, we might crash. This
has been broken since 0011c0091e886b874e485a46ff2c94222ffbf550.
Peter Geoghegan, tested by Noah Misch
|
| |
|
|
| |
Peter Geoghegan
|
| |
|
|
|
|
|
|
|
|
|
|
| |
temp_file_limit is a per-process limit, not a per-session limit across
all cooperating parallel processes; change wording accordingly, per a
suggestion from Tom Lane.
Also, document under max_parallel_workers_per_gather the fact that each
process involved in a parallel query may use as many resources as a
separate session. Caveat emptor.
Per a complaint from Peter Geoghegan.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While syncing our timezone code with IANA's updates in commit 1c1a7cbd6,
I'd chosen not to adopt the code they conditionally compile under #ifdef
ALL_STATE. The main thing that that drives is that the space for gmtime
and localtime timezone definitions isn't statically allocated, but is
malloc'd on first use. I reasoned we didn't need that logic: we don't have
localtime() at all, and we always initialize TimeZone to GMT so we always
need that one. But there is one other thing ALL_STATE does, which is to
make tzload() malloc its transient workspace instead of just declaring it
as a local variable. It turns out that that local variable occupies 78K.
Even worse is that, at least for common US timezone settings, there's a
recursive call to parse the "posixrules" zone name, making peak stack
consumption to select a time zone upwards of 150K. That's an uncomfortably
large fraction of our STACK_DEPTH_SLOP safety margin, and could result in
outright crashes if we try to reduce STACK_DEPTH_SLOP as has been discussed
recently. Furthermore, this means that the postmaster's peak stack
consumption is several times that of a backend running typical queries
(since, except on Windows, backends inherit the timezone GUC values and
don't ever run this code themselves unless you do SET TIMEZONE). That's
completely backwards from a safety perspective.
Hence, adopt the ALL_STATE rather than non-ALL_STATE variant of tzload(),
while not changing the other code aspects that symbol controls. The
risk of an ENOMEM error from malloc() seems less than that of a SIGSEGV
from stack overrun.
This should probably get back-patched along with 1c1a7cbd6 and followon
fixes, whenever we decide we have enough confidence in the updates to do
that.
|
| |
|
|
|
|
|
|
|
| |
Per discussion on pgsql-hackers, conninfo is better as the column name
because it's more commonly used in PostgreSQL.
Catalog version bumped due to the change of pg_proc.
Author: Michael Paquier
|
| | |
|
| |
|
|
| |
Author: Masahiko Sawada
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ExecInsertIndexTuples treated an exclusion constraint as subject to
noDupErr processing even when it was not listed in arbiterIndexes, and
would therefore not error out for a conflict in such a constraint, instead
returning it as an arbiter-index failure. That led to an infinite loop in
ExecInsert, since ExecCheckIndexConstraints ignored the index as-intended
and therefore didn't throw the expected error. To fix, make the exclusion
constraint code path use the same condition as the index_insert call does
to decide whether no-error-for-duplicates behavior is appropriate. While
at it, refactor a little bit to avoid unnecessary list_member_oid calls.
(That surely wouldn't save anything worth noticing, but I find the code
a bit clearer this way.)
Per bug report from Heikki Rauhala. Back-patch to 9.5 where ON CONFLICT
was introduced.
Report: <4C976D6B-76B4-434C-8052-D009F7B7AEDA@reaktor.fi>
|
| | |
|
| |
|
|
|
|
|
|
|
|
| |
There isn't really any reason not to; the original comments here were
partly confused about subplans versus subquery-in-FROM, and partly
dependent on restrictions that no longer apply now that subqueries return
Paths not Plans. Depending on what's inside the subquery, it might fail
to produce any parallel_safe Paths, but that's fine.
Tom Lane and Robert Haas
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous coding assumed that the value derived by
set_rel_consider_parallel() for an appendrel parent would be accurate for
all the appendrel's children; but this is not so, for example because one
child might scan a temp table. Instead, apply set_rel_consider_parallel()
to each child rel as well as the parent, and then take the AND of the
results as controlling parallel safety for the appendrel as a whole.
(We might someday be able to deal more intelligently than this with cases
in which some of the childrels are parallel-safe and others not, but that's
for later.)
Robert Haas and Tom Lane
|
| |
|
|
|
|
|
|
|
|
| |
This was the intention all along, but an extraneous "return;" in
set_rel_consider_parallel() caused sampled rels to never be marked
consider_parallel.
Since we don't have any partial tablesample path/plan type yet, there's
no possibility of parallelizing the sample scan itself; but this fix
allows such a scan to appear below a parallel join, for example.
|
| |
|
|
|
|
|
| |
We were just leaving the cost fields zeroes, which produces obviously bogus
output with force_parallel_mode = on. With force_parallel_mode = regress,
the zeroes are hidden, but I wonder if they wouldn't still confuse add-on
code such as auto_explain.
|
| |
|
|
|
|
|
|
|
|
| |
I'd been wondering why I was sometimes seeing fractional rowcount
estimates in parallel-query situations, and this seems to be the
reason. (You won't see the fractional parts in EXPLAIN, because it
prints rowcounts with %.0f, but they are apparent in the debugger.)
A fractional rowcount is not any saner for a partial path than any
other kind of path, and it's equally likely to break cost estimation
for higher paths, so apply clamp_row_est() like we do in other places.
|
| |
|
|
|
|
|
| |
Instead of calling PLy_elog() for reporting Python argument parsing
errors, generate appropriate exceptions. This matches the existing plpy
functions and is more consistent with the behavior of the Python
argument parsing routines.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit 915b703e1 I gave get_agg_clause_costs() the responsibility of
marking Aggref nodes with the appropriate aggtranstype. I failed to notice
that where it was being called from, it might see only a subset of the
Aggref nodes that were in the original targetlist. Specifically, if there
are duplicate aggregate calls in the tlist, either make_sort_input_target
or make_window_input_target might put just a single instance into the
grouping_target, and then only that instance would get marked. Fix by
moving the call back into grouping_planner(), before we start building
assorted PathTargets from the query tlist. Per report from Stefan Huehner.
Report: <20160702131056.GD3165@huehner.biz>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit 68fa28f77 I tried to teach SS_finalize_plan() to cope with
initPlans attached anywhere in the plan tree, by dint of moving its
handling of those into the recursion in finalize_plan(). It turns out that
that doesn't really work: if a lower-level plan node emits an initPlan
output parameter in its targetlist, it's legitimate for upper levels to
reference those Params --- and at the point where this code runs, those
references look just like the Param itself, so finalize_plan() quite
properly rejects them as being in the wrong place. We could lobotomize
the checks enough to allow that, probably, but then it's not clear that
we'd have any meaningful check for misplaced Params at all. What seems
better, at least in the near term, is to tweak standard_planner() a bit
so that initPlans are never placed anywhere but the topmost plan node
for a query level, restoring the behavior that occurred pre-9.6. Possibly
we can do better if this code is ever merged into setrefs.c: then it would
be possible to check a Param's placement only when we'd failed to replace
it with a Var referencing a child plan node's targetlist.
BTW, I'm now suspicious that finalize_plan is doing the wrong thing by
returning the node's allParam rather than extParam to be incorporated
in the parent node's set of used parameters. However, it makes no
difference given that initPlans only appear at top level, so I'll leave
that alone for now.
Another thing that emerged from this is that standard_planner() needs
to check for initPlans before deciding that it's safe to stick a Gather
node on top in force_parallel_mode mode. We previously guarded against
that by deciding the plan wasn't wholePlanParallelSafe if any subplans
had been found, but after commit 5ce5e4a12 it's necessary to have this
substitute test, because path parallel_safe markings don't account for
initPlans. (Normally, we'd have decided the paths weren't safe anyway
due to appearances of SubPlan nodes, Params, or CTE scans somewhere in
the tree --- but it's possible for those all to be optimized away while
initPlans still remain.)
Per fuzz testing by Andreas Seltenreich.
Report: <874m89rw7x.fsf@credativ.de>
|
| |
|
|
|
| |
Author: Masahiko Sawada
Discussion: CAD21AoBD=Of1OzL90Xx4Q-3j=-2q7=S87cs75HfutE=eCday2w@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As of 9.6, pg_regress doesn't build unless storage/lwlocknames.h has been
created; but there was nothing forcing that to happen if you just went into
src/test/regress/ and built there. We previously had a similar complaint
about plpython.
To fix in a way that won't break next time we invent a generated header,
make src/backend/Makefile expose a phony target for updating all the
include files it builds, and invoke that before building pg_regress or
plpython. In principle, maybe we ought to invoke that everywhere; but
it would add a lot of usually-useless make cycles, so let's just do it
in the places where people have complained.
I made a couple of cosmetic adjustments in src/backend/Makefile as well,
to deal with the generated headers in consistent orders.
Michael Paquier and Tom Lane
Report: <31398.1467036827@sss.pgh.pa.us>
Report: <20150916200959.GB32090@msg.df7cb.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are two problems in the original coding: one is that if one
walreceiver process exits, the ready_to_display flag remains set in
shared memory, exposing the conninfo of the next walreceiver before
obfuscating. Fix by having WalRcvDie reset the flag.
Second, the sleep-and-retry behavior that waited until walreceiver had
set ready_to_display wasn't liked; the preference is to have it return
no data instead, so let's do that.
Bugs in 9ed551e0a reported by Fujii Masao and Michël Paquier.
Author: Michaël Paquier
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the previous design, the GetForeignUpperPaths FDW callback hook was
called before we got around to labeling upper relations with the proper
consider_parallel flag; this meant that any upper paths created by an FDW
would be marked not-parallel-safe. While that's probably just as well
right now, we aren't going to want it to be true forever. Hence, abandon
the idea that FDWs should be allowed to inject upper paths before the core
code has gotten around to creating the relevant upper relation. (Well,
actually they still can, but it's on their own heads how well it works.)
Instead, adopt the same API already designed for create_upper_paths_hook:
we call GetForeignUpperPaths after each upperrel has been created and
populated with the paths the core planner knows how to make.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 3fc6e2d7f5b652b417fa6937c34de2438d60fa9f introduced new "upper"
RelOptInfo structures but didn't set consider_parallel for them
correctly, a point I completely missed when reviewing it. Later,
commit e06a38965b3bcdaa881e7e06892d4d8ab6c2c980 made the situation
worse by doing it incorrectly for the grouping relation. Try to
straighten all of that out. Along the way, get rid of the annoying
wholePlanParallelSafe flag, which was only necessarily because of
the fact that upper planning stages didn't use paths at the time
that code was written.
The most important immediate impact of these changes is that
force_parallel_mode will provide useful test coverage in quite a few
more scenarios than it did previously, but it's also necessary
preparation for fixing some problems related to subqueries.
Patch by me, reviewed by Tom Lane.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We were merely Assert'ing that the Var matched the RTE it's supposedly
from. But if the user passes incorrect information to pg_get_expr(),
the RTE might in fact not match; this led either to Assert failures
or core dumps, as reported by Chris Hanks in bug #14220. To fix, just
convert the Asserts to test-and-elog. Adjust an existing test-and-elog
elsewhere in the same function to be consistent in wording.
(If we really felt these were user-facing errors, we might promote them to
ereport's; but I can't convince myself that they're worth translating.)
Back-patch to 9.3; the problematic code doesn't exist before that, and
a quick check says that 9.2 doesn't crash on such cases.
Michael Paquier and Thomas Munro
Report: <20160629224349.1407.32667@wrigleys.postgresql.org>
|
| |
|
|
|
|
|
|
|
| |
If serialized_snapshot->subxcnt > 0 and serialized_snapshot->xcnt == 0,
the old coding would do the wrong thing and crash. This can happen
on standby servers.
Report by Andreas Seltenreich. Patch by Thomas Munro, reviewed by
Amit Kapila and tested by Andreas Seltenreich.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, workers sent data to the leader using the client encoding.
That mostly worked, but the leader the converted the data back to the
server encoding. Since not all encoding conversions are reversible,
that could provoke failures. Fix by using the database encoding for
all communication between worker and leader.
Also, while temporary changes to GUC settings, as from the SET clause
of a function, are in general OK for parallel query, changing
client_encoding this way inside of a parallel worker is not OK.
Previously, that would have confused the leader; with these changes,
it would not confuse the leader, but it wouldn't do anything either.
So refuse such changes in parallel workers.
Also, the previous code naively assumed that when it received a
NotifyResonse from the worker, it could pass that directly back to the
user. But now that worker-to-leader communication always uses the
database encoding, that's clearly no longer correct - though,
actually, the old way was always broken for V2 clients. So
disassemble and reconstitute the message instead.
Issues reported by Peter Eisentraut. Patch by me, reviewed by
Peter Eisentraut.
|
| |
|
|
|
|
|
|
|
|
| |
This looks like it would cause changes from subtransactions to be missed
by the iterator being constructed, if those changes had been spilled to
disk previously. This implies that large subtransactions might be lost
(in whole or in part) by logical replication. Found and fixed by
Petru-Florin Mihancea, per bug #14208.
Report: <20160622144830.5791.22512@wrigleys.postgresql.org>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
VS2013 apparently has a problem with taking the address of a formal
parameter in some cases. We do that elsewhere without trouble, but
in this case the address is being passed to a subroutine that will
probably get inlined, so maybe the combination of those things is
what tickles the bug. Anyway, introducing an extra copy of the
parameter value is enough to work around it. Per trouble report
from Umair Shahid.
Report: <CAM184AcjqKYZSdQqBHDrnENXHhW=mXbUC46QYPJ=nAh0gUHCGA@mail.gmail.com>
|
