| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
| |
Use SvREFCNT_inc_simple_void() instead of SvREFCNT_inc() to avoid
warning about unused return value.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, pattern_fixed_prefix() was defined to return whatever fixed
prefix it could extract from the pattern, plus the "rest" of the pattern.
That definition was sensible for LIKE patterns, but not so much for
regexes, where reconstituting a valid pattern minus the prefix could be
quite tricky (certainly the existing code wasn't doing that correctly).
Since the only thing that callers ever did with the "rest" of the pattern
was to pass it to like_selectivity() or regex_selectivity(), let's cut out
the middle-man and just have pattern_fixed_prefix's subroutines do this
directly. Then pattern_fixed_prefix can return a simple selectivity
number, and the question of how to cope with partial patterns is removed
from its API specification.
While at it, adjust the API spec so that callers who don't actually care
about the pattern's selectivity (which is a lot of them) can pass NULL for
the selectivity pointer to skip doing the work of computing a selectivity
estimate.
This patch is only an API refactoring that doesn't actually change any
processing, other than allowing a little bit of useless work to be skipped.
However, it's necessary infrastructure for my upcoming fix to regex prefix
extraction, because after that change there won't be any simple way to
identify the "rest" of the regex, not even to the low level of fidelity
needed by regex_selectivity. We can cope with that if regex_fixed_prefix
and regex_selectivity communicate directly, but not if we have to work
within the old API. Hence, back-patch to all active branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We can do this without creating an API break for estimation functions
by passing the collation using the existing fmgr functionality for
passing an input collation as a hidden parameter.
The need for this was foreseen at the outset, but we didn't get around to
making it happen in 9.1 because of the decision to sort all pg_statistic
histograms according to the database's default collation. That meant that
selectivity estimators generally need to use the default collation too,
even if they're estimating for an operator that will do something
different. The reason it's suddenly become more interesting is that
regexp interpretation also uses a collation (for its LC_TYPE not LC_COLLATE
property), and we no longer want to use the wrong collation when examining
regexps during planning. It's not that the selectivity estimate is likely
to change much from this; rather that we are thinking of caching compiled
regexps during planner estimation, and we won't get the intended benefit
if we cache them with a different collation than the executor will use.
Back-patch to 9.1, both because the regexp change is likely to get
back-patched and because we might as well get this right in all
collation-supporting branches, in case any third-party code wants to
rely on getting the collation. The patch turns out to be minuscule
now that I've done it ...
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
join_path_components() tried to remove leading ".." components from its
tail argument, but it was not nearly bright enough to do so correctly
unless the head argument was (a) absolute and (b) canonicalized.
Rather than try to fix that logic, let's just get rid of it: there is no
correctness reason to remove "..", and cosmetic concerns can be taken
care of by a subsequent canonicalize_path() call. Per bug #6715 from
Greg Davidson.
Back-patch to all supported branches. It appears that pre-9.2, this
function is only used with absolute paths as head arguments, which is why
we'd not noticed the breakage before. However, third-party code might be
expecting this function to work in more general cases, so it seems wise
to back-patch.
In HEAD and 9.2, also make some minor cosmetic improvements to callers.
|
| |
|
|
|
|
|
|
|
|
| |
That caused the plpython_unicode regression test to fail on SQL_ASCII
encoding, as evidenced by the buildfarm. The reason is that with the patch,
you don't get the detail in the error message that you got before. That
detail is actually very informative, so rather than just adjust the expected
output, let's revert that part of the patch for now to make the buildfarm
green again, and figure out some other way to avoid the recursion of
PLy_elog() that doesn't lose the detail.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Windows encodings, "win1252" and so forth, are named differently in Python,
like "cp1252". Also, if the PyUnicode_AsEncodedString() function call fails
for some reason, use a plain ereport(), not a PLy_elog(), to report that
error. That avoids recursion and crash, if PLy_elog() tries to call
PLyUnicode_Bytes() again.
This fixes bug reported by Asif Naeem. Backpatch down to 9.0, before that
plpython didn't even try these conversions.
Jan Urbański, with minor comment improvements by me.
|
| |
|
|
|
|
|
|
| |
This ensures that a standby such as pg_receivexlog will not be selected
as sync standby - which would cause the master to block waiting for
a location that could never happen.
Fujii Masao
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Per bug #6593, REASSIGN OWNED fails when the affected role has created
an extension. Even though the user related to the extension is not
nominally the owner, its OID appears on pg_shdepend and thus causes
problems when the user is to be dropped.
This commit adds code to change the "ownership" of the extension itself,
not of the contained objects. This is fine because it's currently only
called from REASSIGN OWNED, which would also modify the ownership of the
contained objects. However, this is not sufficient for a working ALTER
OWNER implementation extension.
Back-patch to 9.1, where extensions were introduced.
Bug #6593 reported by Emiliano Leporati.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When (re) loading the typcache comparison cache for an enum type's values,
use an up-to-date MVCC snapshot, not the transaction's existing snapshot.
This avoids problems if we encounter an enum OID that was created since our
transaction started. Per report from Andres Freund and diagnosis by Robert
Haas.
To ensure this is safe even if enum comparison manages to get invoked
before we've set a transaction snapshot, tweak GetLatestSnapshot to
redirect to GetTransactionSnapshot instead of throwing error when
FirstSnapshotSet is false. The existing uses of GetLatestSnapshot (in
ri_triggers.c) don't care since they couldn't be invoked except in a
transaction that's already done some work --- but it seems just conceivable
that this might not be true of enums, especially if we ever choose to use
enums in system catalogs.
Note that the comparable coding in enum_endpoint and enum_range_internal
remains GetTransactionSnapshot; this is perhaps debatable, but if we
changed it those functions would have to be marked volatile, which doesn't
seem attractive.
Back-patch to 9.1 where ALTER TYPE ADD VALUE was added.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a CHECK constraint or index definition contained a whole-row Var (that
is, "table.*"), an attempt to copy that definition via CREATE TABLE LIKE or
table inheritance produced incorrect results: the copied Var still claimed
to have the rowtype of the source table, rather than the created table.
For the LIKE case, it seems reasonable to just throw error for this
situation, since the point of LIKE is that the new table is not permanently
coupled to the old, so there's no reason to assume its rowtype will stay
compatible. In the inheritance case, we should ideally allow such
constraints, but doing so will require nontrivial refactoring of CREATE
TABLE processing (because we'd need to know the OID of the new table's
rowtype before we adjust inherited CHECK constraints). In view of the lack
of previous complaints, that doesn't seem worth the risk in a back-patched
bug fix, so just make it throw error for the inheritance case as well.
Along the way, replace change_varattnos_of_a_node() with a more robust
function map_variable_attnos(), which is capable of being extended to
handle insertion of ConvertRowtypeExpr whenever we get around to fixing
the inheritance case nicely, and in the meantime it returns a failure
indication to the caller so that a helpful message with some context can be
thrown. Also, this code will do the right thing with subselects (if we
ever allow them in CHECK or indexes), and it range-checks varattnos before
using them to index into the map array.
Per report from Sergey Konoplev. Back-patch to all supported branches.
|
| |
|
|
|
|
|
| |
This bug was introduced by commit 20d98ab6e4110087d1816cd105a40fcc8ce0a307,
so backpatch this to 9.0-9.2 like that one.
This fixes bug #6710, reported by Tarvi Pillessaar
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The LISTEN/NOTIFY subsystem got confused if SimpleLruZeroPage failed,
which would typically happen as a result of a write() failure while
attempting to dump a dirty pg_notify page out of memory. Subsequently,
all attempts to send more NOTIFY messages would fail with messages like
"Could not read from file "pg_notify/nnnn" at offset nnnnn: Success".
Only restarting the server would clear this condition. Per reports from
Kevin Grittner and Christoph Berg.
Back-patch to 9.0, where the problem was introduced during the
LISTEN/NOTIFY rewrite.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As of 9.2, with the --section option, it is very important that the concept
of "pre data", "data", and "post data" sections of the output be honored
strictly; else a dump divided into separate sectional files might be
unrestorable. However, the dependency-sorting logic knew nothing of
sections and would happily select output orderings that didn't fit that
structure. Doing so was mostly harmless before 9.2, but now we need to be
sure it doesn't do that. To fix, create dummy objects representing the
section boundaries and add dependencies between them and all the normal
objects. (This might sound expensive but it seems to only add a percent or
two to pg_dump's runtime.)
This also fixes a problem introduced in 9.1 by the feature that allows
incomplete GROUP BY lists when a primary key is given in GROUP BY.
That means that views can depend on primary key constraints. Previously,
pg_dump would deal with that by simply emitting the primary key constraint
before the view definition (and hence before the data section of the
output). That's bad enough for simple serial restores, where creating an
index before the data is loaded works, but is undesirable for speed
reasons. But it could lead to outright failure of parallel restores, as
seen in bug #6699 from Joe Van Dyk. That happened because pg_restore would
switch into parallel mode as soon as it reached the constraint, and then
very possibly would try to emit the view definition before the primary key
was committed (as a consequence of another bug that causes the view not to
be correctly marked as depending on the constraint). Adding the section
boundary constraints forces the dependency-sorting code to break the view
into separate table and rule declarations, allowing the rule, and hence the
primary key constraint it depends on, to revert to their intended location
in the post-data section. This also somewhat accidentally works around the
bogus-dependency-marking problem, because the rule will be correctly shown
as depending on the constraint, so parallel pg_restore will now do the
right thing. (We will fix the bogus-dependency problem for real in a
separate patch, but that patch is not easily back-portable to 9.1, so the
fact that this patch is enough to dodge the only known symptom is
fortunate.)
Back-patch to 9.1, except for the hunk that adds verification that the
finished archive TOC list is in correct section order; the place where
it was convenient to add that doesn't exist in 9.1.
|
| |
|
|
|
|
|
|
|
|
|
| |
Repeated execution of an uncorrelated ARRAY_SUBLINK sub-select (which
I think can only happen if the sub-select is embedded in a larger,
correlated subquery) would leak memory for the duration of the query,
due to not reclaiming the array generated in the previous execution.
Per bug #6698 from Armando Miraglia. Diagnosis and fix idea by Heikki,
patch itself by me.
This has been like this all along, so back-patch to all supported versions.
|
| |
|
|
|
|
|
|
| |
In passing, reword another instance of the same message that was
gratuitously different.
Author: Josh Kupershmidt
after a bug report by Bosco Rama
|
| |
|
|
| |
found by Stefan Kaltenbrunner
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This prevents a pg_basebackup backup session that just does a base
backup (no xlog involved at all) from becoming the synchronous slave
and thus blocking all access while it runs.
Also fixes the problem when a higher priority slave shows up it would
become the sync standby before it has reached the STREAMING state, by
making sure we can only switch to a walsender that's actually STREAMING.
Fujii Masao
|
| |
|
|
|
|
|
|
|
|
| |
When HS startup is deferred because of overflowed subtransactions, ensure
that we re-initialize KnownAssignedXids for when both existing and incoming
snapshots have non-zero qualifying xids.
Fixes bug #6661 reported by Valentine Gogichashvili.
Analysis and fix by Andres Freund
|
| |
|
|
|
|
|
|
|
| |
WALSender now woken up after each background flush by WALwriter, avoiding
multi-second replication delay for an all-async commit workload.
Replication delay reduced from 7s with default settings to 200ms, allowing
significantly reduced data loss at failover.
Andres Freund and Simon Riggs
|
| |
|
|
|
|
| |
Without this, pg_basebackup doesn't tell you why it failed when for example
there is a file in the data directory that the backend doesn't have
permissions to read.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
When we allowed read-only transactions to skip assigning XIDs
we introduced the possibility that a fully deleted btree page
could be reused. This broke the index link sequence which could
then lead to indexscans silently returning fewer rows than would
have been correct. The actual incidence of silent errors from
this is thought to be very low because of the exact workload
required and locking pre-conditions. Fix is to remove pages only
if index page opaque->btpo.xact precedes RecentGlobalXmin.
Noah Misch, reviewed by Simon Riggs
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
| |
Per discussion, it does not seem like a good idea to change the behavior of
age(xid) in a minor release, even though the old definition causes the
function to fail on hot standby slaves. Therefore, revert commit
5829387381d2e4edf84652bb5a712f6185860670 and follow-on commits in the back
branches only.
|
| |
|
|
|
|
| |
DST law changes in Antarctica, Armenia, Chile, Cuba, Falkland Islands,
Gaza, Haiti, Hebron, Morocco, Syria, Tokelau Islands.
Historical corrections for Canada.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's not very sensible to set such attributes on a handler function;
but if one were to do so, fmgr.c went into infinite recursion because
it would call fmgr_security_definer instead of the handler function proper.
There is no way for fmgr_security_definer to know that it ought to call the
handler and not the original function referenced by the FmgrInfo's fn_oid,
so it tries to do the latter, causing the whole process to start over
again.
Ordinarily such misconfiguration of a procedural language's handler could
be written off as superuser error. However, because we allow non-superuser
database owners to create procedural languages and the handler for such a
language becomes owned by the database owner, it is possible for a database
owner to crash the backend, which ideally shouldn't be possible without
superuser privileges. In 9.2 and up we will adjust things so that the
handler functions are always owned by superusers, but in existing branches
this is a minor security fix.
Problem noted by Noah Misch (after several of us had failed to detect
it :-(). This is CVE-2012-2655.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We used to only allow offsets less than +/-13 hours, then it was +/14,
then it was +/-15. That's still not good enough though, as per today's bug
report from Patric Bechtel. This time I actually looked through the Olson
timezone database to find the largest offsets used anywhere. The winners
are Asia/Manila, at -15:56:00 until 1844, and America/Metlakatla, at
+15:13:42 until 1867. So we'd better allow offsets less than +/-16 hours.
Given the history, we are way overdue to have some greppable #define
symbols controlling this, so make some ... and also remove an obsolete
comment that didn't get fixed the last time.
Back-patch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
AbortOutOfAnyTransaction failed to do anything if the state it saw on
entry corresponded to failing partway through StartTransaction. I fixed
AbortCurrentTransaction to cope with that case way back in commit
60b2444cc3ba037630c9b940c3c9ef01b954b87b, but evidently overlooked that
AbortOutOfAnyTransaction should do likewise.
Back-patch to all supported branches. It's not clear that this omission
has any more-than-cosmetic consequences, but it's also not clear that it
doesn't, so back-patching seems the least risky choice.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The only interesting-for-performance case wherein we force heapscan here
is when we're rebuilding the relcache init file, and the only such case
that is likely to be examining a catalog big enough to be syncscanned is
RelationBuildTupleDesc. But the early-exit optimization in that code gets
broken if we start the scan at a random place within the catalog, so that
allowing syncscan is actually a big deoptimization if pg_attribute is large
(at least for the normal case where the rows for core system catalogs have
never been changed since initdb). Hence, prevent syncscan here. Per my
testing pursuant to complaints from Jeff Frost and Greg Sabino Mullane,
though neither of them seem to have actually hit this specific problem.
Back-patch to 8.3, where syncscan was introduced.
|
| |
|
|
|
|
|
|
|
|
|
| |
Previously, casts to name could generate invalidly-encoded results.
Also, make these functions match namein() more exactly, by consistently
using palloc0() instead of ad-hoc zeroing code.
Back-patch to all supported branches.
Karl Schnaitter and Tom Lane
|
| |
|
|
|
|
|
|
|
|
|
| |
The previous coding presented a significant bottleneck when dumping
databases containing many thousands of schemas, since the total time
spent searching would increase roughly as O(N^2) in the number of objects.
Noted by Jeff Janes, though I rewrote his proposed patch to use the
existing findObjectByOid infrastructure.
Since this is a longstanding performance bug, backpatch to all supported
versions.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
If a seqscan encounters many consecutive pages containing only dead tuples,
it can remain in the loop in heapgettup for a long time, and there was no
CHECK_FOR_INTERRUPTS anywhere in that loop. This meant there were
real-world situations where a query would be effectively uncancelable for
long stretches. Add a check placed to occur once per page, which should be
enough to provide reasonable response time without adding any measurable
overhead.
Report and patch by Merlin Moncure (though I tweaked it a bit).
Back-patch to all supported branches.
|
| |
|
|
|
|
|
|
| |
When the column name is an unqualified name, rather than table.column,
the error message complains about too many dotted names, which is
wrong. Report by Peter Eisentraut based on examination of the
sepgsql regression test output, but the problem also affects COMMENT.
New wording as suggested by Tom Lane.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is no reason to do this as early as possible in postmaster startup,
and good reason not to do it until we have completely created the
postmaster's lock file, namely that it might contribute to pg_ctl thinking
that postmaster startup has timed out. (This would require a rather
unusual amount of time to be spent scanning temp file directories, but we
have at least one field report of it happening reproducibly.)
Back-patch to 9.1. Before that, pg_ctl didn't wait for additional info to
be added to the lock file, so it wasn't a problem.
Note that this is not a complete fix to the slow-start issue in 9.1,
because we still had identify_system_timezone being run during postmaster
start in 9.1. But that's at least a reasonably well-defined delay, with
an easy workaround if needed, whereas the temp-files scan is not so
predictable and cannot be avoided.
|
| |
|
|
|
| |
We were using memcpy() to copy to a possibly overlapping memory region,
which is a no-no. Use memmove() instead.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If the tablespace directory is missing entirely, we allow DROP TABLESPACE
to go through, on the grounds that it should be possible to clean up the
catalog entry in such a situation. However, we forgot that the pg_tblspc
symlink might still be there. We should try to remove the symlink too
(but not fail if it's no longer there), since not doing so can lead to
weird behavior subsequently, as per report from Michael Nolan.
There was some discussion of adding dependency links to prevent DROP
TABLESPACE when the catalogs still contain references to the tablespace.
That might be worth doing too, but it's an orthogonal question, and in
any case wouldn't be back-patchable.
Back-patch to 9.0, which is as far back as the logic looks like this.
We could possibly do something similar in 8.x, but given the lack of
reports I'm not sure it's worth the trouble, and anyway the case could
not arise in the form the logic is meant to cover (namely, a post-DROP
transaction rollback having resurrected the pg_tablespace entry after
some or all of the filesystem infrastructure is gone).
|
| | |
|
| |
|
|
| |
Fixes bug #6635, reported by Akira Kurosawa.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When inserting the downlinks for a split gist page, we used hold the locks
on the child pages until the insertion into the parent - and recursively its
parent if it had to be split too - were all completed. Change that so that
the locks on child pages are released after the insertion in the immediate
parent is done, before recursing further up the tree.
This reduces the number of lwlocks that are held simultaneously. Holding
many locks is bad for concurrency, and in extreme cases you can even hit
the limit of 100 simultaneously held lwlocks in a backend. If you're really
unlucky, you can hit the limit while in a critical section, which brings
down the whole system.
This fixes bug #6629 reported by Tom Forbes. Backpatch to 9.1. The page
splitting code was rewritten in 9.1, and the old code did not have this
problem.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The original coding failed to reset ImmediateInterruptOK before returning,
which would potentially allow a subsequent query-cancel interrupt to be
accepted at an unsafe point. This is a really nasty bug since it's so hard
to predict the consequences, but they could be unpleasant.
Also, ensure that signal handlers are serviced before this function
returns, even if the semaphore is already set. This should make the
behavior more like Unix.
Back-patch to all supported versions.
|
| |
|
|
|
|
| |
Show a proper error message instead of a SQL error.
Josh Kupershmidt
|
| |
|
|
|
|
| |
out of memory when looping through large numbers of rows.
Flag the converted tuples to be freed. Complaint and patch
by Joe.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 62c7bd31c8878dd45c9b9b2429ab7a12103f3590 had assorted problems, most
visibly that it broke PREPARE TRANSACTION in the presence of session-level
advisory locks (which should be ignored by PREPARE), as per a recent
complaint from Stephen Rees. More abstractly, the patch made the
LockMethodData.transactional flag not merely useless but outright
dangerous, because in point of fact that flag no longer tells you anything
at all about whether a lock is held transactionally. This fix therefore
removes that flag altogether. We now rely entirely on the convention
already in use in lock.c that transactional lock holds must be owned by
some ResourceOwner, while session holds are never so owned. Setting the
locallock struct's owner link to NULL thus denotes a session hold, and
there is no redundant marker for that.
PREPARE TRANSACTION now works again when there are session-level advisory
locks, and it is also able to transfer transactional advisory locks to the
prepared transaction, but for implementation reasons it throws an error if
we hold both types of lock on a single lockable object. Perhaps it will be
worth improving that someday.
Assorted other minor cleanup and documentation editing, as well.
Back-patch to 9.1, except that in the 9.1 branch I did not remove the
LockMethodData.transactional flag for fear of causing an ABI break for
any external code that might be examining those structs.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Normally whole-row Vars are printed as "tabname.*". However, that does not
work at top level of a targetlist, because per SQL standard the parser will
think that the "*" should result in column-by-column expansion; which is
not at all what a whole-row Var implies. We used to just print the table
name in such cases, which works most of the time; but it fails if the table
name matches a column name available anywhere in the FROM clause. This
could lead for instance to a view being interpreted differently after dump
and reload. Adding parentheses doesn't fix it, but there is a reasonably
simple kluge we can use instead: attach a no-op cast, so that the "*" isn't
syntactically at top level anymore. This makes the printing of such
whole-row Vars a lot more consistent with other Vars, and may indeed fix
more cases than just the reported one; I'm suspicious that cases involving
schema qualification probably didn't work properly before, either.
Per bug report and fix proposal from Abbas Butt, though this patch is quite
different in detail from his.
Back-patch to all supported versions.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If it fails to open a new log file, the syslogger assumes there's something
wrong with its parameters (such as log_directory), and stops attempting
automatic time-based or size-based log file rotations. Sending it SIGHUP
is supposed to start that up again. However, the original coding for that
was really bogus, involving clobbering a couple of GUC variables and hoping
that SIGHUP processing would restore them. Get rid of that technique in
favor of maintaining a separate flag showing we've turned rotation off.
Per report from Mark Kirkwood.
Also, the syslogger will automatically attempt to create the log_directory
directory if it doesn't exist, but that was only happening at startup.
For consistency and ease of use, it should do the same whenever the value
of log_directory is changed by SIGHUP.
Back-patch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Before 9.1, PL/Python functions returning composite types could return
a string and it would be parsed using record_in. The 9.1 changes made
PL/Python only expect dictionaries, tuples, or objects supporting
getattr as output of composite functions, resulting in a regression
and a confusing error message, as the strings were interpreted as
sequences and the code for transforming lists to database tuples was
used. Fix this by treating strings separately as before, before
checking for the other types.
The reason why it's important to support string to database tuple
conversion is that trigger functions on tables with composite columns
get the composite row passed in as a string (from record_out).
Without supporting converting this back using record_in, this makes it
impossible to implement pass-through behavior for these columns, as
PL/Python no longer accepts strings for composite values.
A better solution would be to fix the code that transforms composite
inputs into Python objects to produce dictionaries that would then be
correctly interpreted by the Python->PostgreSQL counterpart code. But
that would be too invasive to backpatch to 9.1, and it is too late in
the 9.2 cycle to attempt it. It should be revisited in the future,
though.
Reported as bug #6559 by Kirill Simonov.
Jan Urbański
|
