aboutsummaryrefslogtreecommitdiff
path: root/src
Commit message (Collapse)AuthorAge
...
* Fix more race conditions in the newly-added pg_rewind test.Heikki Linnakangas2020-12-07
| | | | | | | | | | | | | | | | | | | | | | | | pg_rewind looks at the control file to check what timeline a server is on. But promotion doesn't immediately write a checkpoint, it merely writes an end-of-recovery WAL record. If pg_rewind runs immediately after promotion, before the checkpoint has completed, it will think think that the server is still on the earlier timeline. We ran into this issue a long time ago already, see commit 484a848a73f. It's a bit bogus that pg_rewind doesn't determine the timeline correctly until the end-of-recovery checkpoint has completed. We probably should fix that. But for now work around it by waiting for the checkpoint to complete before running pg_rewind, like we did in commit 484a848a73f. In the passing, tidy up the new test a little bit. Rerder the INSERTs so that the comments make more sense, remove a spurious CHECKPOINT call after pg_rewind has already run, and add --debug option, so that if this fails again, we'll have more data. Per buildfarm failure at https://buildfarm.postgresql.org/cgi-bin/show_stage_log.pl?nm=rorqual&dt=2020-12-06%2018%3A32%3A19&stg=pg_rewind-check. Backpatch to all supported versions. Discussion: https://www.postgresql.org/message-id/1713707e-e318-761c-d287-5b6a4aa807e8@iki.fi
* Fix race conditions in newly-added test.Heikki Linnakangas2020-12-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buildfarm has been failing sporadically on the new test. I was able to reproduce this by adding a random 0-10 s delay in the walreceiver, just before it connects to the primary. There's a race condition where node_3 is promoted before it has fully caught up with node_1, leading to diverged timelines. When node_1 is later reconfigured as standby following node_3, it fails to catch up: LOG: primary server contains no more WAL on requested timeline 1 LOG: new timeline 2 forked off current database system timeline 1 before current recovery point 0/30000A0 That's the situation where you'd need to use pg_rewind, but in this case it happens already when we are just setting up the actual pg_rewind scenario we want to test, so change the test so that it waits until node_3 is connected and fully caught up before promoting it, so that you get a clean, controlled failover. Also rewrite some of the comments, for clarity. The existing comments detailed what each step in the test did, but didn't give a good overview of the situation the steps were trying to create. For reasons I don't understand, the test setup had to be written slightly differently in 9.6 and 9.5 than in later versions. The 9.5/9.6 version needed node 1 to be reinitialized from backup, whereas in later versions it could be shut down and reconfigured to be a standby. But even 9.5 should support "clean switchover", where primary makes sure that pending WAL is replicated to standby on shutdown. It would be nice to figure out what's going on there, but that's independent of pg_rewind and the scenario that this test tests. Discussion: https://www.postgresql.org/message-id/b0a3b95b-82d2-6089-6892-40570f8c5e60%40iki.fi
* Fix pg_rewind bugs when rewinding a standby server.Heikki Linnakangas2020-12-03
| | | | | | | | | | | | | If the target is a standby server, its WAL doesn't end at the last checkpoint record, but at minRecoveryPoint. We must scan all the WAL from the last common checkpoint all the way up to minRecoveryPoint for modified pages, and also consider that portion when determining whether the server needs rewinding. Backpatch to all supported versions. Author: Ian Barwick and me Discussion: https://www.postgresql.org/message-id/CABvVfJU-LDWvoz4-Yow3Ay5LZYTuPD7eSjjE4kGyNZpXC6FrVQ%40mail.gmail.com
* Ensure that expandTableLikeClause() re-examines the same table.Tom Lane2020-12-01
| | | | | | | | | | | | | | | | | | | | | | As it stood, expandTableLikeClause() re-did the same relation_openrv call that transformTableLikeClause() had done. However there are scenarios where this would not find the same table as expected. We hold lock on the LIKE source table, so it can't be renamed or dropped, but another table could appear before it in the search path. This explains the odd behavior reported in bug #16758 when cloning a table as a temp table of the same name. This case worked as expected before commit 502898192 introduced the need to open the source table twice, so we should fix it. To make really sure we get the same table, let's re-open it by OID not name. That requires adding an OID field to struct TableLikeClause, which is a little nervous-making from an ABI standpoint, but as long as it's at the end I don't think there's any serious risk. Per bug #16758 from Marc Boeren. Like the previous patch, back-patch to all supported branches. Discussion: https://postgr.es/m/16758-840e84a6cfab276d@postgresql.org
* Avoid memcpy() with a NULL source pointer and count == 0Alvaro Herrera2020-12-01
| | | | | | | | | | | | | | | | When memcpy() is called on a pointer, the compiler is entitled to assume that the pointer is not null, which can lead to optimizing nearby code in potentially undesirable ways. We still want such optimizations (gcc's -fdelete-null-pointer-checks) in cases where they're valid. Related: commit 13bba02271dc. Backpatch to pg11, where this particular instance appeared. Reported-by: Ranier Vilela <ranier.vf@gmail.com> Reported-by: Zhihong Yu <zyu@yugabyte.com> Discussion: https://postgr.es/m/CAEudQApUndmQkr5fLrCKXQ7+ib44i7S+Kk93pyVThS85PnG3bQ@mail.gmail.com Discussion: https://postgr.es/m/CALNJ-vSdhwSM5f4tnNn1cdLHvXMVe_S+V3nR5GwNrmCPNB2VtQ@mail.gmail.com
* Free disk space for dropped relations on commit.Thomas Munro2020-12-01
| | | | | | | | | | | | | | | | | | | | | When committing a transaction that dropped a relation, we previously truncated only the first segment file to free up disk space (the one that won't be unlinked until the next checkpoint). Truncate higher numbered segments too, even though we unlink them on commit. This frees the disk space immediately, even if other backends have open file descriptors and might take a long time to get around to handling shared invalidation events and closing them. Also extend the same behavior to the first segment, in recovery. Back-patch to all supported releases. Bug: #16663 Reported-by: Denis Patron <denis.patron@previnet.it> Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com> Reviewed-by: Neil Chen <carpenter.nail.cz@gmail.com> Reviewed-by: David Zhang <david.zhang@highgo.ca> Discussion: https://postgr.es/m/16663-fe97ccf9932fc800%40postgresql.org
* Prevent parallel index build in a standalone backend.Tom Lane2020-11-30
| | | | | | | | | | | | | | | | | This can't work if there's no postmaster, and indeed the code got an assertion failure trying. There should be a check on IsUnderPostmaster gating the use of parallelism, as the planner has for ordinary parallel queries. Commit 40d964ec9 got this right, so follow its model of checking IsUnderPostmaster at the same place where we check for max_parallel_maintenance_workers == 0. In general, new code implementing parallel utility operations should do the same. Report and patch by Yulin Pei, cosmetically adjusted by me. Back-patch to v11 where this code came in. Discussion: https://postgr.es/m/HK0PR01MB22747D839F77142D7E76A45DF4F50@HK0PR01MB2274.apcprd01.prod.exchangelabs.com
* Fix miscomputation of direct_lateral_relids for join relations.Tom Lane2020-11-30
| | | | | | | | | | | | | | If a PlaceHolderVar is to be evaluated at a join relation, but its value is only needed there and not at higher levels, we neglected to update the joinrel's direct_lateral_relids to include the PHV's source rel. This causes problems because join_is_legal() then won't allow joining the joinrel to the PHV's source rel at all, leading to "failed to build any N-way joins" planner failures. Per report from Andreas Seltenreich. Back-patch to 9.5 where the problem originated. Discussion: https://postgr.es/m/87blfgqa4t.fsf@aurora.ydns.eu
* Fix recently-introduced breakage in psql's \connect command.Tom Lane2020-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Through my misreading of what the existing code actually did, commits 85c54287a et al. broke psql's behavior for the case where "\c connstring" provides a password in the connstring. We should use that password in such a case, but as of 85c54287a we ignored it (and instead, prompted for a password). Commit 94929f1cf fixed that in HEAD, but since I thought it was cleaning up a longstanding misbehavior and not one I'd just created, I didn't back-patch it. Hence, back-patch the portions of 94929f1cf having to do with password management. In addition to fixing the introduced bug, this means that "\c -reuse-previous=on connstring" will allow re-use of an existing connection's password if the connstring doesn't change user/host/port. That didn't happen before, but it seems like a bug fix, and anyway I'm loath to have significant differences in this code across versions. Also fix an error with the same root cause about whether or not to override a connstring's setting of client_encoding. As of 85c54287a we always did so; restore the previous behavior of overriding only when stdin/stdout are a terminal and there's no environment setting of PGCLIENTENCODING. (I find that definition a bit surprising, but right now doesn't seem like the time to revisit it.) Per bug #16746 from Krzysztof Gradek. As with the previous patch, back-patch to all supported branches. Discussion: https://postgr.es/m/16746-44b30e2edf4335d4@postgresql.org
* Fix a recently-introduced race condition in LISTEN/NOTIFY handling.Tom Lane2020-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 566372b3d fixed some race conditions involving concurrent SimpleLruTruncate calls, but it introduced new ones in async.c. A newly-listening backend could attempt to read Notify SLRU pages that were in process of being truncated, possibly causing an error. Also, the QUEUE_TAIL pointer could become set to a value that's not equal to the queue position of any backend. While that's fairly harmless in v13 and up (thanks to commit 51004c717), in older branches it resulted in near-permanent disabling of the queue truncation logic, so that continued use of NOTIFY led to queue-fill warnings and eventual inability to send any more notifies. (A server restart is enough to make that go away, but it's still pretty unpleasant.) The core of the problem is confusion about whether QUEUE_TAIL represents the "logical" tail of the queue (i.e., the oldest still-interesting data) or the "physical" tail (the oldest data we've not yet truncated away). To fix, split that into two variables. QUEUE_TAIL regains its definition as the logical tail, and we introduce a new variable to track the oldest un-truncated page. Per report from Mikael Gustavsson. Like the previous patch, back-patch to all supported branches. Discussion: https://postgr.es/m/1b8561412e8a4f038d7a491c8b922788@smhi.se
* Properly check index mark/restore in ExecSupportsMarkRestore.Andrew Gierth2020-11-24
| | | | | | | | | | | | | | | | Previously this code assumed that all IndexScan nodes supported mark/restore, which is not true since it depends on optional index AM support functions. This could lead to errors about missing support functions in rare edge cases of mergejoins with no sort keys, where an unordered non-btree index scan was placed on the inner path without a protecting Materialize node. (Normally, the fact that merge join requires ordered input would avoid this error.) Backpatch all the way since this bug is ancient. Per report from Eugen Konkov on irc. Discussion: https://postgr.es/m/87o8jn50be.fsf@news-spur.riddles.org.uk
* Skip allocating hash table in EXPLAIN-only mode.Heikki Linnakangas2020-11-20
| | | | | | | | This is a backpatch of commit 2cccb627f1, backpatched due to popular demand. Backpatch to all supported versions. Author: Alexey Bashtanov Discussion: https://www.postgresql.org/message-id/36823f65-050d-ae24-aa4d-a37726998240%40imap.cc
* On macOS, use -isysroot in link steps as well as compile steps.Tom Lane2020-11-20
| | | | | | | | | | | | | | | | | | | | | | | | We previously put the -isysroot switch only into CPPFLAGS, theorizing that it was only needed to find the right copies of include files. However, it seems that we also need to use it while linking programs, to find the right stub ".tbd" files for libraries. We got away without that up to now, but apparently that was mostly luck. It may also be that failures are only observed when the Xcode version is noticeably out of sync with the host macOS version; the case that's prompting action right now is that builds fail when using latest Xcode (12.2) on macOS Catalina, even though it's fine on Big Sur. Hence, add -isysroot to LDFLAGS as well. (It seems that the more common practice is to put it in CFLAGS, whence it'd be included at both compile and link steps. However, we can't mess with CFLAGS in the platform template file without confusing configure's logic for choosing default CFLAGS.) Back-patch of 49407dc32 into all supported branches. Report and patch by James Hilliard (some cosmetic mods by me) Discussion: https://postgr.es/m/20201120003314.20560-1-james.hilliard1@gmail.com
* Adjust DSM and DSA slot usage constants (back-patch).Thomas Munro2020-11-20
| | | | | | | | | | | | | | | 1. Previously, a DSA area would create up to four segments at each size before doubling the size. After this commit, it will create only two at each size, so it ramps up faster and therefore needs fewer slots. 2. Previously, the total limit on DSM slots allowed for 2 per connection. Switch to 5 per connection. This back-patches commit d061ea21 from release 13 into 10-12 based on a field complaint. Discussion: https://postgr.es/m/CAO03teA%2BjE1qt5iWDWzHqaufqBsF6EoOgZphnazps_tr_jDPZA%40mail.gmail.com Discussion: https://postgr.es/m/CA%2BhUKGL6H2BpGbiF7Lj6QiTjTGyTLW_vLR%3DSn2tEBeTcYXiMKw%40mail.gmail.com
* Further fixes for CREATE TABLE LIKE: cope with self-referential FKs.Tom Lane2020-11-19
| | | | | | | | | | | | | | | | | | | | | | | Commit 502898192 was too careless about the order of execution of the additional ALTER TABLE operations generated by expandTableLikeClause. It just stuck them all at the end, which seems okay for most purposes. But it falls down in the case where LIKE is importing a primary key or unique index and the outer CREATE TABLE includes a FOREIGN KEY constraint that needs to depend on that index. Weird as that is, it used to work, so we ought to keep it working. To fix, make parse_utilcmd.c insert LIKE clauses between index-creation and FK-creation commands in the transformed list of commands, and change utility.c so that the commands generated by expandTableLikeClause are executed immediately not at the end. One could imagine scenarios where this wouldn't work either; but currently expandTableLikeClause only makes column default expressions, CHECK constraints, and indexes, and this ordering seems fine for those. Per bug #16730 from Sofoklis Papasofokli. Like the previous patch, back-patch to all supported branches. Discussion: https://postgr.es/m/16730-b902f7e6e0276b30@postgresql.org
* Don't Insert() a VFD entry until it's fully built.Tom Lane2020-11-16
| | | | | | | | | | | | | | | | | | | Otherwise, if FDDEBUG is enabled, the debugging output fails because it tries to read the fileName, which isn't set up yet (and should in fact always be NULL). AFAICT, this has been wrong since Berkeley. Before 96bf88d52, it would accidentally fail to crash on platforms where snprintf() is forgiving about being passed a NULL pointer for %s; but the file name intended to be included in the debug output wouldn't ever have shown up. Report and fix by Greg Nancarrow. Although this is only visibly broken in custom-made builds, it still seems worth back-patching to all supported branches, as the FDDEBUG code is pretty useless as it stands. Discussion: https://postgr.es/m/CAJcOf-cUDgm9qYtC_B6XrC6MktMPNRby2p61EtSGZKnfotMArw@mail.gmail.com
* Do not return NULL for error cases in satisfies_hash_partition().Tom Lane2020-11-16
| | | | | | | | | | | | | | | | | | | | | | | Since this function is used as a CHECK constraint condition, returning NULL is tantamount to returning TRUE, which would have the effect of letting in a row that doesn't satisfy the hash condition. Admittedly, the cases for which this is done should be unreachable in practice, but that doesn't make it any less a bad idea. It also seems like a dartboard was used to decide which error cases should throw errors as opposed to returning NULL. For the checks for NULL input values, I just switched it to returning false. There's some argument that an error would be better; but the case really should be can't-happen in a generated hash constraint, so it's likely not worth more code for. For the parent-relation-open-failure case, it seems like we might as well let relation_open throw an error, instead of having an impossible-to-diagnose constraint failure. Back-patch to v11 where this code came in. Discussion: https://postgr.es/m/24067.1605134819@sss.pgh.pa.us
* Use "true" not "TRUE" in one ICU function call.Tom Lane2020-11-16
| | | | | | | | | | | | | This was evidently missed in commit 6337865f3, which generally did s/TRUE/true/ everywhere. It escaped notice up to now because ICU versions before ICU 68 provided definitions of "TRUE" and "FALSE" regardless. With ICU 68, it fails to compile. Per report from Condor. Back-patch to v11 where 6337865f3 came in. (I've not tested v10, where this call originated, but I imagine it's fine since we defined TRUE in c.h back then.) Discussion: https://postgr.es/m/7a6f3336165bfe3ca66abcda7966f9d0@stz-bg.com
* Fix fuzzy thinking about amcanmulticol versus amcaninclude.Tom Lane2020-11-15
| | | | | | | | | | | | | | | | | | These flags should be independent: in particular an index AM should be able to say that it supports include columns without necessarily supporting multiple key columns. The included-columns patch got this wrong, possibly aided by the fact that it didn't bother to update the documentation. While here, clarify some text about amcanreturn, which was a little vague about what should happen when amcanreturn reports that only some of the index columns are returnable. Noted while reviewing the SP-GiST included-columns patch, which quite incorrectly (and unsafely) changed SP-GiST to claim amcanmulticol = true as a workaround for this bug. Backpatch to v11 where included columns were introduced.
* doc: wire protocol data type for history file content is byteaBruce Momjian2020-11-12
| | | | | | | | | | | Document that though the history file content is marked as bytea, it is the same a text, and neither is btyea-escaped or encoding converted. Reported-by: Brar Piening Discussion: https://postgr.es/m/6a1b9cd9-17e3-df67-be55-86102af6bdf5@gmx.de Backpatch-through: 13 - 9.5 (not master)
* Remove duplicate code in brin_memtuple_initializeTomas Vondra2020-11-11
| | | | | | | | | | Commit 8bf74967dab moved some of the code from brin_new_memtuple to brin_memtuple_initialize, but this resulted in some of the code being duplicate. Fix by removing the duplicate lines and backpatch to 10. Author: Tomas Vondra Backpatch-through: 10 Discussion: https://postgr.es/m/5eb50c97-9a8e-b691-8c40-1b2a55611c4c%40enterprisedb.com
* Fix and simplify some usages of TimestampDifference().Tom Lane2020-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce TimestampDifferenceMilliseconds() to simplify callers that would rather have the difference in milliseconds, instead of the select()-oriented seconds-and-microseconds format. This gets rid of at least one integer division per call, and it eliminates some apparently-easy-to-mess-up arithmetic. Two of these call sites were in fact wrong: * pg_prewarm's autoprewarm_main() forgot to multiply the seconds by 1000, thus ending up with a delay 1000X shorter than intended. That doesn't quite make it a busy-wait, but close. * postgres_fdw's pgfdw_get_cleanup_result() thought it needed to compute microseconds not milliseconds, thus ending up with a delay 1000X longer than intended. Somebody along the way had noticed this problem but misdiagnosed the cause, and imposed an ad-hoc 60-second limit rather than fixing the units. This was relatively harmless in context, because we don't care that much about exactly how long this delay is; still, it's wrong. There are a few more callers of TimestampDifference() that don't have a direct need for seconds-and-microseconds, but can't use TimestampDifferenceMilliseconds() either because they do need microsecond precision or because they might possibly deal with intervals long enough to overflow 32-bit milliseconds. It might be worth inventing another API to improve that, but that seems outside the scope of this patch; so those callers are untouched here. Given the fact that we are fixing some bugs, and the likelihood that future patches might want to back-patch code that uses this new API, back-patch to all supported branches. Alexey Kondratov and Tom Lane Discussion: https://postgr.es/m/3b1c053a21c07c1ed5e00be3b2b855ef@postgrespro.ru
* Work around cross-version-upgrade issues created by commit 9e38c2bb5.Tom Lane2020-11-10
| | | | | | | | | | | | | Summarily changing the STYPE of regression-test aggregates that depend on array_append or array_cat is an issue for the buildfarm's cross-version-upgrade tests, because those aggregates (as defined in the back branches) now won't load into HEAD. Although this seems like only a minimal risk for genuine user-defined aggregates, we need to do something for the buildfarm. Hence, adjust the aggregate definitions, in both HEAD and the back branches. Discussion: https://postgr.es/m/1401824.1604537031@sss.pgh.pa.us Discussion: https://postgr.es/m/E1kaQ2c-0005lx-Eg@gemulon.postgresql.org
* Stamp 11.10.REL_11_10Tom Lane2020-11-09
|
* Ignore attempts to \gset into specially treated variables.Noah Misch2020-11-09
| | | | | | | | | | | | | | | If an interactive psql session used \gset when querying a compromised server, the attacker could execute arbitrary code as the operating system account running psql. Using a prefix not found among specially treated variables, e.g. every lowercase string, precluded the attack. Fix by issuing a warning and setting no variable for the column in question. Users wanting the old behavior can use a prefix and then a meta-command like "\set HISTSIZE :prefix_HISTSIZE". Back-patch to 9.5 (all supported versions). Reviewed by Robert Haas. Reported by Nick Cleaton. Security: CVE-2020-25696
* In security-restricted operations, block enqueue of at-commit user code.Noah Misch2020-11-09
| | | | | | | | | | | | | | | | | | Specifically, this blocks DECLARE ... WITH HOLD and firing of deferred triggers within index expressions and materialized view queries. An attacker having permission to create non-temp objects in at least one schema could execute arbitrary SQL functions under the identity of the bootstrap superuser. One can work around the vulnerability by disabling autovacuum and not manually running ANALYZE, CLUSTER, REINDEX, CREATE INDEX, VACUUM FULL, or REFRESH MATERIALIZED VIEW. (Don't restore from pg_dump, since it runs some of those commands.) Plain VACUUM (without FULL) is safe, and all commands are fine when a trusted user owns the target object. Performance may degrade quickly under this workaround, however. Back-patch to 9.5 (all supported versions). Reviewed by Robert Haas. Reported by Etienne Stalmans. Security: CVE-2020-25695
* Translation updatesPeter Eisentraut2020-11-09
| | | | | Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git Source-Git-Hash: 4bbd5d22a42690d7e76c41ae04044d8d9ef2d5ed
* Fix redundant error messages in client toolsPeter Eisentraut2020-11-07
| | | | | | A few client tools duplicate error messages already provided by libpq. Discussion: https://www.postgresql.org/message-id/flat/3e937641-88a1-e697-612e-99bba4b8e5e4%40enterprisedb.com
* Properly detoast data in brin_form_tupleTomas Vondra2020-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | brin_form_tuple failed to consider the values may be toasted, inserting the toast pointer into the index. This may easily result in index corruption, as the toast data may be deleted and cleaned up by vacuum. The cleanup however does not care about indexes, leaving invalid toast pointers behind, which triggers errors like this: ERROR: missing chunk number 0 for toast value 16433 in pg_toast_16426 A less severe consequence are inconsistent failures due to the index row being too large, depending on whether brin_form_tuple operated on plain or toasted version of the row. For example CREATE TABLE t (val TEXT); INSERT INTO t VALUES ('... long value ...') CREATE INDEX idx ON t USING brin (val); would likely succeed, as the row would likely include toast pointer. Switching the order of INSERT and CREATE INDEX would likely fail: ERROR: index row size 8712 exceeds maximum 8152 for index "idx" because this happens before the row values are toasted. The bug exists since PostgreSQL 9.5 where BRIN indexes were introduced. So backpatch all the way back. Author: Tomas Vondra Reviewed-by: Alvaro Herrera Backpatch-through: 9.5 Discussion: https://postgr.es/m/20201001184133.oq5uq75sb45pu3aw@development Discussion: https://postgr.es/m/20201104010544.zexj52mlldagzowv%40development
* Revert "Accept relations of any kind in LOCK TABLE".Tom Lane2020-11-06
| | | | | | | | | | Revert 59ab4ac32, as well as the followup fix 33862cb9c, in all branches. We need to think a bit harder about what the behavior of LOCK TABLE on views should be, and there's no time for that before next week's releases. We'll take another crack at this later. Discussion: https://postgr.es/m/16703-e348f58aab3cf6cc@postgresql.org
* Revert "pg_dump: Lock all relations, not just plain tables".Tom Lane2020-11-06
| | | | | | | | | | Revert 403a3d91c, as well as the followup fix 7f4235032, in all branches. We need to think a bit harder about what the behavior of LOCK TABLE on views should be, and there's no time for that before next week's releases. We'll take another crack at this later. Discussion: https://postgr.es/m/16703-e348f58aab3cf6cc@postgresql.org
* Don't throw an error for LOCK TABLE on a self-referential view.Tom Lane2020-11-05
| | | | | | | | | | | | | LOCK TABLE has complained about "infinite recursion" when applied to a self-referential view, ever since we made it recurse into views in v11. However, that breaks pg_dump's new assumption that it's okay to lock every relation. There doesn't seem to be any good reason to throw an error: if we just abandon the recursion, we've still satisfied the requirement of locking every referenced relation. Per bug #16703 from Andrew Bille (via Alexander Lakhin). Discussion: https://postgr.es/m/16703-e348f58aab3cf6cc@postgresql.org
* Guard against core dump from uninitialized subplan.Tom Lane2020-11-03
| | | | | | | | | | | | | | If the planner erroneously puts a non-parallel-safe SubPlan into a parallelized portion of the query tree, nodeSubplan.c will fail in the worker processes because it finds a null in es_subplanstates, which it's unable to cope with. It seems worth a test-and-elog to make that an error case rather than a core dump case. This probably should have been included in commit 16ebab688, which was responsible for allowing nulls to appear in es_subplanstates to begin with. So, back-patch to v10 where that came in. Discussion: https://postgr.es/m/924226.1604422326@sss.pgh.pa.us
* Allow users with BYPASSRLS to alter their own passwords.Tom Lane2020-11-03
| | | | | | | | | | | | | | | | The intention in commit 491c029db was to require superuserness to change the BYPASSRLS property, but the actual effect of the coding in AlterRole() was to require superuserness to change anything at all about a BYPASSRLS role. Other properties of a BYPASSRLS role should be changeable under the same rules as for a normal role, though. Fix that, and also take care of some documentation omissions related to BYPASSRLS and REPLICATION role properties. Tom Lane and Stephen Frost, per bug report from Wolfgang Walther. Back-patch to all supported branches. Discussion: https://postgr.es/m/a5548a9f-89ee-3167-129d-162b5985fcf8@technowledgy.de
* Fix unportable use of getnameinfo() in pg_hba_file_rules view.Tom Lane2020-11-02
| | | | | | | | | | | | | | | | | | | | | | | fill_hba_line() thought it could get away with passing sizeof(struct sockaddr_storage) rather than the actual addrlen previously returned by getaddrinfo(). While that appears to work on many platforms, it does not work on FreeBSD 11: you get back a failure, which leads to the view showing NULL for the address and netmask columns in all rows. The POSIX spec for getnameinfo() is pretty clearly on FreeBSD's side here: you should pass the actual address length. So it seems plausible that there are other platforms where this coding also fails, and we just hadn't noticed. Also, IMO the fact that getnameinfo() failure leads to a NULL output is pretty bogus in itself. Our pg_getnameinfo_all() wrapper is careful to emit "???" on failure, and we should use that in such cases. NULL should only be emitted in rows that don't have IP addresses. Per bug #16695 from Peter Vandivier. Back-patch to v10 where this code was added. Discussion: https://postgr.es/m/16695-a665558e2f630be7@postgresql.org
* Extend PageIsVerified() to handle more custom optionsMichael Paquier2020-11-02
| | | | | | | | | | | | | | | | | | | | | | This is useful for checks of relation pages without having to load the pages into the shared buffers, and two cases can make use of that: page verification in base backups and the online, lock-safe, flavor. Compatibility is kept with past versions using a routine that calls the new extended routine with the set of options compatible with the original version. Contrary to d401c576, a macro cannot be used as there may be external code relying on the presence of the original routine. This is applied down to 11, where this will be used by a follow-up commit addressing a set of issues with page verification in base backups. Extracted from a larger patch by the same author. Author: Anastasia Lubennikova Reviewed-by: Michael Paquier, Julien Rouhaud Discussion: https://postgr.es/m/608f3476-0598-2514-2c03-e05c7d2b0cbd@postgrespro.ru Backpatch-through: 11
* Avoid null pointer dereference if error result lacks SQLSTATE.Tom Lane2020-11-01
| | | | | | | | | Although error results received from the backend should always have a SQLSTATE field, ones generated by libpq won't, making this code vulnerable to a crash after, say, untimely loss of connection. Noted by Coverity. Oversight in commit 403a3d91c. Back-patch to 9.5, as that was.
* Reproduce debug_query_string==NULL on parallel workers.Noah Misch2020-10-31
| | | | | | | | | | Certain background workers initiate parallel queries while debug_query_string==NULL, at which point they attempted strlen(NULL) and died to SIGSEGV. Older debug_query_string observers allow NULL, so do likewise in these newer ones. Back-patch to v11, where commit 7de4a1bcc56f494acbd0d6e70781df877dc8ecb5 introduced the first of these. Discussion: https://postgr.es/m/20201014022636.GA1962668@rfd.leadboat.com
* Stabilize timetz test across DST transitions.Tom Lane2020-10-29
| | | | | | | | | | | | | | The timetz test cases I added in commit a9632830b were unintentionally sensitive to whether or not DST is active in the PST8PDT time zone. Thus, they'll start failing this coming weekend, as reported by Bernhard M. Wiedemann in bug #16689. Fortunately, DST-awareness is not significant to the purpose of these test cases, so we can just force them all to PDT (DST hours) to preserve stability of the results. Back-patch to v10, as the prior patch was. Discussion: https://postgr.es/m/16689-57701daa23b377bf@postgresql.org
* Use mode "r" for popen() in psql's evaluate_backtick().Tom Lane2020-10-28
| | | | | | | | | | | | | | | | | | In almost all other places, we use plain "r" or "w" mode in popen() calls (the exceptions being for COPY data). This one has been overlooked (possibly because it's buried in a ".l" flex file?), but it's using PG_BINARY_R. Kensuke Okamura complained in bug #16688 that we fail to strip \r when stripping the trailing newline from a backtick result string. That's true enough, but we'd also fail to convert embedded \r\n cleanly, which also seems undesirable. Fixing the popen() mode seems like the best way to deal with this. It's been like this for a long time, so back-patch to all supported branches. Discussion: https://postgr.es/m/16688-c649c7b69cd7e6f8@postgresql.org
* Fix use-after-free bug with event triggers and ALTER TABLE.Tom Lane2020-10-27
| | | | | | | | | | | | | | | | | EventTriggerAlterTableEnd neglected to make sure that it built its output list in the right context. In simple cases this was masked because the function is called in PortalContext which will be sufficiently long-lived anyway; but that doesn't make it not a bug. Commit ced138e8c fixed this in HEAD and v13, but mistakenly chose not to back-patch further. Back-patch the same code change all the way (I didn't bother with the test case though, as it would prove nothing in pre-v13 branches). Per report from Arseny Sher. Original fix by Jehan-Guillaume de Rorthais. Discussion: https://postgr.es/m/877drcyprb.fsf@ars-thinkpad Discussion: https://postgr.es/m/20200902193715.6e0269d4@firost
* Makefile comment: remove reference to tools/thread/thread_testBruce Momjian2020-10-27
| | | | | | | | | | You can't compile thread_test alone anymore, and the location moved too. Reported-by: Tom Lane Discussion: https://postgr.es/m/1062278.1603819969@sss.pgh.pa.us Backpatch-through: 9.5
* pg_dump: Lock all relations, not just plain tablesAlvaro Herrera2020-10-27
| | | | | | | | | | | | | | | | Now that LOCK TABLE can take any relation type, acquire lock on all relations that are to be dumped. This prevents schema changes or deadlock errors that could cause a dump to fail after expending much effort. The server is tested to have the capability and the feature disabled if it doesn't, so that a patched pg_dump doesn't fail when connecting to an unpatched server. Backpatch to 9.5. Author: Álvaro Herrera <alvherre@alvh.no-ip.org> Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> Reported-by: Wells Oliver <wells.oliver@gmail.com> Discussion: https://postgr.es/m/20201021200659.GA32358@alvherre.pgsql
* Accept relations of any kind in LOCK TABLEAlvaro Herrera2020-10-27
| | | | | | | | | | | | | | | The restriction that only tables and views can be locked by LOCK TABLE is quite arbitrary, since the underlying mechanism can lock any relation type. Drop the restriction so that programs such as pg_dump can lock all relations they're interested in, preventing schema changes that could cause a dump to fail after expending much effort. Backpatch to 9.5. Author: Álvaro Herrera <alvherre@alvh.no-ip.org> Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> Reported-by: Wells Oliver <wells.oliver@gmail.com> Discussion: https://postgr.es/m/20201021200659.GA32358@alvherre.pgsql
* Fix ancient bug in ecpg's pthread_once() emulation for Windows.Tom Lane2020-10-24
| | | | | | | | | | | | | | | | We must not set the "done" flag until after we've executed the initialization function. Otherwise, other threads can fall through the initial unlocked test before initialization is really complete. This has been seen to cause rare failures of ecpg's thread/descriptor test, and it could presumably cause other sorts of misbehavior in threaded ECPG-using applications, since ecpglib relies on pthread_once() in several places. Diagnosis and patch by me, based on investigation by Alexander Lakhin. Back-patch to all supported branches (the bug dates to 2007). Discussion: https://postgr.es/m/16685-d6cd241872c101d3@postgresql.org
* Update time zone data files to tzdata release 2020d.Tom Lane2020-10-22
| | | | | DST law changes in Palestine, with a whopping 120 hours' notice. Also some historical corrections for Palestine.
* Sync our copy of the timezone library with IANA release tzcode2020d.Tom Lane2020-10-22
| | | | | | | | There's no functional change at all here, but I'm curious to see whether this change successfully shuts up Coverity's warning about a useless strcmp(), which appeared with the previous update. Discussion: http://mm.icann.org/pipermail/tz/2020-October/029370.html
* Fix connection string handling in psql's \connect command.Tom Lane2020-10-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | psql's \connect claims to be able to re-use previous connection parameters, but in fact it only re-uses the database name, user name, host name (and possibly hostaddr, depending on version), and port. This is problematic for assorted use cases. Notably, pg_dump[all] emits "\connect databasename" commands which we would like to have re-use all other parameters. If such a script is loaded in a psql run that initially had "-d connstring" with some non-default parameters, those other parameters would be lost, potentially causing connection failure. (Thus, this is the same kind of bug addressed in commits a45bc8a4f and 8e5793ab6, although the details are much different.) To fix, redesign do_connect() so that it pulls out all properties of the old PGconn using PQconninfo(), and then replaces individual properties in that array. In the case where we don't wish to re-use anything, get libpq's default settings using PQconndefaults() and replace entries in that, so that we don't need different code paths for the two cases. This does result in an additional behavioral change for cases where the original connection parameters allowed multiple hosts, say "psql -h host1,host2", and the \connect request allows re-use of the host setting. Because the previous coding relied on PQhost(), it would only permit reconnection to the same host originally selected. Although one can think of scenarios where that's a good thing, there are others where it is not. Moreover, that behavior doesn't seem to meet the principle of least surprise, nor was it documented; nor is it even clear it was intended, since that coding long pre-dates the addition of multi-host support to libpq. Hence, this patch is content to drop it and re-use the host list as given. Per Peter Eisentraut's comments on bug #16604. Back-patch to all supported branches. Discussion: https://postgr.es/m/16604-933f4b8791227b15@postgresql.org
* Use fast checkpoint in PostgresNode::backup()Alvaro Herrera2020-10-21
| | | | Should cause tests to be a bit faster
* Fix ALTER TABLE .. ENABLE/DISABLE TRIGGER recursionAlvaro Herrera2020-10-20
| | | | | | | | | | | | | | | | More precisely, correctly handle the ONLY flag indicating not to recurse. This was implemented in 86f575948c77 by recursing in trigger.c, but that's the wrong place; use ATSimpleRecursion instead, which behaves properly. However, because legacy inheritance has never recursed in that situation, make sure to do that only for new-style partitioning. I noticed this problem while testing a fix for another bug in the vicinity. This has been wrong all along, so backpatch to 11. Discussion: https://postgr.es/m/20201016235925.GA29829@alvherre.pgsql
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-02 03:25:59 +0000