pg_upgrade pg_upgrade 1 Application pg_upgrade upgrade a PostgreSQL server instance pg_upgrade -b oldbindir -B newbindir -d olddatadir -D newdatadir option pg_upgrade (formerly called pg_migrator) allows data stored in PostgreSQL data files to be upgraded to a later PostgreSQL major version without the data dump/reload typically required for major version upgrades, e.g. from 9.6.3 to the current major release of PostgreSQL. It is not required for minor version upgrades, e.g. from 9.6.2 to 9.6.3. Major PostgreSQL releases regularly add new features that often change the layout of the system tables, but the internal data storage format rarely changes. pg_upgrade uses this fact to perform rapid upgrades by creating new system tables and simply reusing the old user data files. If a future major release ever changes the data storage format in a way that makes the old data format unreadable, pg_upgrade will not be usable for such upgrades. (The community will attempt to avoid such situations.) pg_upgrade does its best to make sure the old and new clusters are binary-compatible, e.g. by checking for compatible compile-time settings, including 32/64-bit binaries. It is important that any external modules are also binary compatible, though this cannot be checked by pg_upgrade. pg_upgrade supports upgrades from 8.4.X and later to the current major release of PostgreSQL, including snapshot and beta releases. pg_upgrade accepts the following command-line arguments: -b bindir --old-bindir=bindir the old PostgreSQL executable directory; environment variable PGBINOLD -B bindir --new-bindir=bindir the new PostgreSQL executable directory; environment variable PGBINNEW -c --check check clusters only, don't change any data -d datadir --old-datadir=datadir the old cluster data directory; environment variable PGDATAOLD -D datadir --new-datadir=datadir the new cluster data directory; environment variable PGDATANEW -j --jobs number of simultaneous processes or threads to use -k --link use hard links instead of copying files to the new cluster -o options --old-options options options to be passed directly to the old postgres command; multiple option invocations are appended -O options --new-options options options to be passed directly to the new postgres command; multiple option invocations are appended -p port --old-port=port the old cluster port number; environment variable PGPORTOLD -P port --new-port=port the new cluster port number; environment variable PGPORTNEW -r --retain retain SQL and log files even after successful completion -U username --username=username cluster's install user name; environment variable PGUSER -v --verbose enable verbose internal logging -V --version display version information, then exit -? --help show help, then exit These are the steps to perform an upgrade with pg_upgrade: If you are using a version-specific installation directory, e.g. /opt/PostgreSQL/&majorversion;, you do not need to move the old cluster. The graphical installers all use version-specific installation directories. If your installation directory is not version-specific, e.g. /usr/local/pgsql, it is necessary to move the current PostgreSQL install directory so it does not interfere with the new PostgreSQL installation. Once the current PostgreSQL server is shut down, it is safe to rename the PostgreSQL installation directory; assuming the old directory is /usr/local/pgsql, you can do: mv /usr/local/pgsql /usr/local/pgsql.old to rename the directory. Build the new PostgreSQL source with configure flags that are compatible with the old cluster. pg_upgrade will check pg_controldata to make sure all settings are compatible before starting the upgrade. Install the new server's binaries and support files. pg_upgrade is included in a default installation. For source installs, if you wish to install the new server in a custom location, use the prefix variable: make prefix=/usr/local/pgsql.new install Initialize the new cluster using initdb. Again, use compatible initdb flags that match the old cluster. Many prebuilt installers do this step automatically. There is no need to start the new cluster. Install any custom shared object files (or DLLs) used by the old cluster into the new cluster, e.g. pgcrypto.so, whether they are from contrib or some other source. Do not install the schema definitions, e.g. CREATE EXTENSION pgcrypto, because these will be upgraded from the old cluster. Also, any custom full text search files (dictionary, synonym, thesaurus, stop words) must also be copied to the new cluster. pg_upgrade will connect to the old and new servers several times, so you might want to set authentication to peer in pg_hba.conf or use a ~/.pgpass file (see ). Make sure both database servers are stopped using, on Unix, e.g.: pg_ctl -D /opt/PostgreSQL/9.6 stop pg_ctl -D /opt/PostgreSQL/&majorversion; stop or on Windows, using the proper service names: NET STOP postgresql-9.6 NET STOP postgresql-&majorversion; Streaming replication and log-shipping standby servers can remain running until a later step. If you are upgrading standby servers (as outlined in section ), verify that the old standby servers are caught up by running pg_controldata against the old primary and standby clusters. Verify that the Latest checkpoint location values match in all clusters. (There will be a mismatch if old standby servers were shut down before the old primary.) Also, if upgrading standby servers, change wal_level to replica in the postgresql.conf file on the new master cluster. Always run the pg_upgrade binary of the new server, not the old one. pg_upgrade requires the specification of the old and new cluster's data and executable (bin) directories. You can also specify user and port values, and whether you want the data files linked instead of the default copy behavior. If you use link mode, the upgrade will be much faster (no file copying) and use less disk space, but you will not be able to access your old cluster once you start the new cluster after the upgrade. Link mode also requires that the old and new cluster data directories be in the same file system. (Tablespaces and pg_wal can be on different file systems.) See pg_upgrade --help for a full list of options. The --jobs option allows multiple CPU cores to be used for copying/linking of files and to dump and reload database schemas in parallel; a good place to start is the maximum of the number of CPU cores and tablespaces. This option can dramatically reduce the time to upgrade a multi-database server running on a multiprocessor machine. For Windows users, you must be logged into an administrative account, and then start a shell as the postgres user and set the proper path: RUNAS /USER:postgres "CMD.EXE" SET PATH=%PATH%;C:\Program Files\PostgreSQL\&majorversion;\bin; and then run pg_upgrade with quoted directories, e.g.: pg_upgrade.exe --old-datadir "C:/Program Files/PostgreSQL/9.6/data" --new-datadir "C:/Program Files/PostgreSQL/&majorversion;/data" --old-bindir "C:/Program Files/PostgreSQL/9.6/bin" --new-bindir "C:/Program Files/PostgreSQL/&majorversion;/bin" Once started, pg_upgrade will verify the two clusters are compatible and then do the upgrade. You can use pg_upgrade --check to perform only the checks, even if the old server is still running. pg_upgrade --check will also outline any manual adjustments you will need to make after the upgrade. If you are going to be using link mode, you should use the --link option with --check to enable link-mode-specific checks. pg_upgrade requires write permission in the current directory. Obviously, no one should be accessing the clusters during the upgrade. pg_upgrade defaults to running servers on port 50432 to avoid unintended client connections. You can use the same port number for both clusters when doing an upgrade because the old and new clusters will not be running at the same time. However, when checking an old running server, the old and new port numbers must be different. If an error occurs while restoring the database schema, pg_upgrade will exit and you will have to revert to the old cluster as outlined in below. To try pg_upgrade again, you will need to modify the old cluster so the pg_upgrade schema restore succeeds. If the problem is a contrib module, you might need to uninstall the contrib module from the old cluster and install it in the new cluster after the upgrade, assuming the module is not being used to store user data. If you have Streaming Replication (see ) or Log-Shipping (see ) standby servers, follow these steps to upgrade them. You will not be running pg_upgrade on the standby servers, but rather rsync. Do not start any servers yet. Make sure the new binaries and support files are installed on all standby servers. Make sure the new standby data directories do not exist or are empty. If initdb was run, delete the standby server data directories. Install the same custom shared object files on the new standbys that you installed in the new master cluster. If the standby servers are still running, stop them now using the above instructions. Save any configuration files from the standbys you need to keep, e.g. postgresql.conf, recovery.conf, as these will be overwritten or removed in the next step. From a directory that is above the old and new database cluster directories, run this for each slave: rsync --archive --delete --hard-links --size-only old_pgdata new_pgdata remote_dir where old_pgdata and new_pgdata are relative to the current directory, and remote_dir is above the old and new cluster directories on the standby server. The old and new relative cluster paths must match on the master and standby server. Consult the rsync manual page for details on specifying the remote directory, e.g. standbyhost:/opt/PostgreSQL/. rsync will be fast when pg_upgrade's --link mode is used because it will create hard links on the remote server rather than transferring user data. Unfortunately, rsync needlessly copies the files associated with temporary and unlogged tables. If you have tablespaces, you will need to run a similar rsync command for each tablespace directory. If you have relocated pg_wal outside the data directories, rsync must be run on those directories too. Configure the servers for log shipping. (You do not need to run pg_start_backup() and pg_stop_backup() or take a file system backup as the slaves are still synchronized with the master.) If you modified pg_hba.conf, restore its original settings. It might also be necessary to adjust other configuration files in the new cluster to match the old cluster, e.g. postgresql.conf. The new server can now be safely started, and then any rsync'ed standby servers. If any post-upgrade processing is required, pg_upgrade will issue warnings as it completes. It will also generate script files that must be run by the administrator. The script files will connect to each database that needs post-upgrade processing. Each script should be run using: psql --username=postgres --file=script.sql postgres The scripts can be run in any order and can be deleted once they have been run. In general it is unsafe to access tables referenced in rebuild scripts until the rebuild scripts have run to completion; doing so could yield incorrect results or poor performance. Tables not referenced in rebuild scripts can be accessed immediately. Because optimizer statistics are not transferred by pg_upgrade, you will be instructed to run a command to regenerate that information at the end of the upgrade. You might need to set connection parameters to match your new cluster. Once you are satisfied with the upgrade, you can delete the old cluster's data directories by running the script mentioned when pg_upgrade completes. (Automatic deletion is not possible if you have user-defined tablespaces inside the old data directory.) You can also delete the old installation directories (e.g. bin, share). If, after running pg_upgrade, you wish to revert to the old cluster, there are several options: If you ran pg_upgrade with --check, no modifications were made to the old cluster and you can re-use it anytime. If you ran pg_upgrade with --link, the data files are shared between the old and new cluster. If you started the new cluster, the new server has written to those shared files and it is unsafe to use the old cluster. If you ran pg_upgrade without --link or did not start the new server, the old cluster was not modified except that, if linking started, a .old suffix was appended to $PGDATA/global/pg_control. To reuse the old cluster, possibly remove the .old suffix from $PGDATA/global/pg_control; you can then restart the old cluster. pg_upgrade does not support upgrading of databases containing these reg* OID-referencing system data types: regproc, regprocedure, regoper, regoperator, regconfig, and regdictionary. (regtype can be upgraded.) All failure, rebuild, and reindex cases will be reported by pg_upgrade if they affect your installation; post-upgrade scripts to rebuild tables and indexes will be generated automatically. If you are trying to automate the upgrade of many clusters, you should find that clusters with identical database schemas require the same post-upgrade steps for all cluster upgrades; this is because the post-upgrade steps are based on the database schemas, and not user data. For deployment testing, create a schema-only copy of the old cluster, insert dummy data, and upgrade that. If you are upgrading a pre-PostgreSQL 9.2 cluster that uses a configuration-file-only directory, you must pass the real data directory location to pg_upgrade, and pass the configuration directory location to the server, e.g. -d /real-data-directory -o '-D /configuration-directory'. If using a pre-9.1 old server that is using a non-default Unix-domain socket directory or a default that differs from the default of the new cluster, set PGHOST to point to the old server's socket location. (This is not relevant on Windows.) If you want to use link mode and you do not want your old cluster to be modified when the new cluster is started, make a copy of the old cluster and upgrade that in link mode. To make a valid copy of the old cluster, use rsync to create a dirty copy of the old cluster while the server is running, then shut down the old server and run rsync --checksum again to update the copy with any changes to make it consistent. (--checksum is necessary because rsync only has file modification-time granularity of one second.) You might want to exclude some files, e.g. postmaster.pid, as documented in . If your file system supports file system snapshots or copy-on-write file copies, you can use that to make a backup of the old cluster and tablespaces, though the snapshot and copies must be created simultaneously or while the database server is down.