Revert "Handle better implicit transaction state of pipeline mode"

This reverts commit d77f91214fb7 on all stable branches, due to concerns
regarding the compatility side effects this could create in a minor
release.  The change still exists on HEAD.

Discussion: https://postgr.es/m/CA+TgmoZqRgeFTg4+Yf_CMRRXiHuNz1u6ZC4FvVk+rxw0RmOPnw@mail.gmail.com
Backpatch-through: 13

4 files changed, 23 insertions, 184 deletions

diff --git a/doc/src/sgml/protocol.sgml b/doc/src/sgml/protocol.sgml
index a4e64383a96..b6c07b1d053 100644
--- a/doc/src/sgml/protocol.sgml
+++ b/doc/src/sgml/protocol.sgml
@@ -1088,17 +1088,16 @@ SELCT 1/0;<!-- this typo is intentional -->
 
    <para>
     If the client has not issued an explicit <command>BEGIN</command>,
-    then an implicit transaction block is started and each Sync ordinarily
-    causes an implicit <command>COMMIT</command> if the preceding step(s)
-    succeeded, or an implicit <command>ROLLBACK</command> if they failed.
-    This implicit transaction block will only be detected by the server
-    when the first command ends without a sync.  There are a few DDL
-    commands (such as <command>CREATE DATABASE</command>) that cannot be
-    executed inside a transaction block. If one of these is executed in a
-    pipeline, it will fail unless it is the first command after a Sync.
-    Furthermore, upon success it will force an immediate commit to preserve
-    database consistency. Thus a Sync immediately following one of these
-    commands has no effect except to respond with ReadyForQuery.
+    then each Sync ordinarily causes an implicit <command>COMMIT</command>
+    if the preceding step(s) succeeded, or an
+    implicit <command>ROLLBACK</command> if they failed.  However, there
+    are a few DDL commands (such as <command>CREATE DATABASE</command>)
+    that cannot be executed inside a transaction block.  If one of
+    these is executed in a pipeline, it will fail unless it is the first
+    command in the pipeline.  Furthermore, upon success it will force an
+    immediate commit to preserve database consistency.  Thus a Sync
+    immediately following one of these commands has no effect except to
+    respond with ReadyForQuery.
    </para>
 
    <para>
diff --git a/src/backend/access/transam/xact.c b/src/backend/access/transam/xact.c
index 20ebc24194f..7a3d9b4b012 100644
--- a/src/backend/access/transam/xact.c
+++ b/src/backend/access/transam/xact.c
@@ -3490,6 +3490,16 @@ PreventInTransactionBlock(bool isTopLevel, const char *stmtType)
 						stmtType)));
 
 	/*
+	 * inside a pipeline that has started an implicit transaction?
+	 */
+	if (MyXactFlags & XACT_FLAGS_PIPELINING)
+		ereport(ERROR,
+				(errcode(ERRCODE_ACTIVE_SQL_TRANSACTION),
+		/* translator: %s represents an SQL statement name */
+				 errmsg("%s cannot be executed within a pipeline",
+						stmtType)));
+
+	/*
 	 * inside a function call?
 	 */
 	if (!isTopLevel)
@@ -3600,6 +3610,9 @@ IsInTransactionBlock(bool isTopLevel)
 	if (IsSubTransaction())
 		return true;
 
+	if (MyXactFlags & XACT_FLAGS_PIPELINING)
+		return true;
+
 	if (!isTopLevel)
 		return true;
 
diff --git a/src/backend/tcop/postgres.c b/src/backend/tcop/postgres.c
index 237c8ab00a2..c8c687d6f51 100644
--- a/src/backend/tcop/postgres.c
+++ b/src/backend/tcop/postgres.c
@@ -2746,17 +2746,6 @@ start_xact_command(void)
 
 		xact_started = true;
 	}
-	else if (MyXactFlags & XACT_FLAGS_PIPELINING)
-	{
-		/*
-		 * When the first Execute message is completed, following commands
-		 * will be done in an implicit transaction block created via
-		 * pipelining. The transaction state needs to be updated to an
-		 * implicit block if we're not already in a transaction block (like
-		 * one started by an explicit BEGIN).
-		 */
-		BeginImplicitTransactionBlock();
-	}
 
 	/*
 	 * Start statement timeout if necessary.  Note that this'll intentionally
@@ -4876,13 +4865,6 @@ PostgresMain(const char *dbname, const char *username)
 
 			case 'S':			/* sync */
 				pq_getmsgend(&input_message);
-
-				/*
-				 * If pipelining was used, we may be in an implicit
-				 * transaction block. Close it before calling
-				 * finish_xact_command.
-				 */
-				EndImplicitTransactionBlock();
 				finish_xact_command();
 				send_ready_for_query = true;
 				break;
diff --git a/src/bin/pgbench/t/001_pgbench_with_server.pl b/src/bin/pgbench/t/001_pgbench_with_server.pl
index 7915f6fd0aa..f9690c64957 100644
--- a/src/bin/pgbench/t/001_pgbench_with_server.pl
+++ b/src/bin/pgbench/t/001_pgbench_with_server.pl
@@ -897,161 +897,6 @@ $node->pgbench(
 }
 	});
 
-# Try SET LOCAL as first pipeline command.  This succeeds and the first
-# command is not executed inside an implicit transaction block, causing
-# a WARNING.
-$node->pgbench(
-	'-t 1 -n -M extended',
-	0,
-	[],
-	[qr{WARNING:  SET LOCAL can only be used in transaction blocks}],
-	'SET LOCAL outside implicit transaction block of pipeline',
-	{
-		'001_pgbench_pipeline_set_local_1' => q{
-\startpipeline
-SET LOCAL statement_timeout='1h';
-\endpipeline
-}
-	});
-
-# Try SET LOCAL as second pipeline command.  This succeeds and the second
-# command does not cause a WARNING to be generated.
-$node->pgbench(
-	'-t 1 -n -M extended',
-	0,
-	[],
-	[qr{^$}],
-	'SET LOCAL inside implicit transaction block of pipeline',
-	{
-		'001_pgbench_pipeline_set_local_2' => q{
-\startpipeline
-SELECT 1;
-SET LOCAL statement_timeout='1h';
-\endpipeline
-}
-	});
-
-# Try REINDEX CONCURRENTLY as first pipeline command.  This succeeds
-# as the first command is outside the implicit transaction block of
-# a pipeline.
-$node->pgbench(
-	'-t 1 -n -M extended',
-	0,
-	[],
-	[],
-	'REINDEX CONCURRENTLY outside implicit transaction block of pipeline',
-	{
-		'001_pgbench_pipeline_reindex_1' => q{
-\startpipeline
-REINDEX TABLE CONCURRENTLY pgbench_accounts;
-SELECT 1;
-\endpipeline
-}
-	});
-
-# Try REINDEX CONCURRENTLY as second pipeline command.  This fails
-# as the second command is inside an implicit transaction block.
-$node->pgbench(
-	'-t 1 -n -M extended',
-	2,
-	[],
-	[],
-	'error: REINDEX CONCURRENTLY inside implicit transaction block of pipeline',
-	{
-		'001_pgbench_pipeline_reindex_2' => q{
-\startpipeline
-SELECT 1;
-REINDEX TABLE CONCURRENTLY pgbench_accounts;
-\endpipeline
-}
-	});
-
-# Try VACUUM as first pipeline command.  Like REINDEX CONCURRENTLY, this
-# succeeds as this is outside the implicit transaction block of a pipeline.
-$node->pgbench(
-	'-t 1 -n -M extended',
-	0,
-	[],
-	[],
-	'VACUUM outside implicit transaction block of pipeline',
-	{
-		'001_pgbench_pipeline_vacuum_1' => q{
-\startpipeline
-VACUUM pgbench_accounts;
-\endpipeline
-}
-	});
-
-# Try VACUUM as second pipeline command.  This fails, as the second command
-# of a pipeline is inside an implicit transaction block.
-$node->pgbench(
-	'-t 1 -n -M extended',
-	2,
-	[],
-	[],
-	'error: VACUUM inside implicit transaction block of pipeline',
-	{
-		'001_pgbench_pipeline_vacuum_2' => q{
-\startpipeline
-SELECT 1;
-VACUUM pgbench_accounts;
-\endpipeline
-}
-	});
-
-# Try subtransactions in a pipeline.  These are forbidden in implicit
-# transaction blocks.
-$node->pgbench(
-	'-t 1 -n -M extended',
-	2,
-	[],
-	[],
-	'error: subtransactions not allowed in pipeline',
-	{
-		'001_pgbench_pipeline_subtrans' => q{
-\startpipeline
-SAVEPOINT a;
-SELECT 1;
-ROLLBACK TO SAVEPOINT a;
-SELECT 2;
-\endpipeline
-}
-	});
-
-# Try LOCK TABLE as first pipeline command.  This fails as LOCK is outside
-# an implicit transaction block.
-$node->pgbench(
-	'-t 1 -n -M extended',
-	2,
-	[],
-	[],
-	'error: LOCK TABLE outside implicit transaction block of pipeline',
-	{
-		'001_pgbench_pipeline_lock_1' => q{
-\startpipeline
-LOCK pgbench_accounts;
-SELECT 1;
-\endpipeline
-}
-	});
-
-# Try LOCK TABLE as second pipeline command.  This succeeds as LOCK is inside
-# an implicit transaction block.
-$node->pgbench(
-	'-t 1 -n -M extended',
-	0,
-	[],
-	[],
-	'LOCK TABLE inside implicit transaction block of pipeline',
-	{
-		'001_pgbench_pipeline_lock_2' => q{
-\startpipeline
-SELECT 1;
-LOCK pgbench_accounts;
-\endpipeline
-}
-	});
-
 # Working \startpipeline in prepared query mode with serializable
 $node->pgbench(
 	'-c4 -t 10 -n -M prepared',