Add support for zstd base backup compression.

Both client-side compression and server-side compression are now
supported for zstd. In addition, a backup compressed by the server
using zstd can now be decompressed by the client in order to
accommodate the use of -Fp.

Jeevan Ladhe, with some edits by me.

Discussion: http://postgr.es/m/CA+Tgmobyzfbz=gyze2_LL1ZumZunmaEKbHQxjrFkOR7APZGu-g@mail.gmail.com

1 files changed, 299 insertions, 0 deletions

diff --git a/src/backend/replication/basebackup_zstd.c b/src/backend/replication/basebackup_zstd.c
new file mode 100644
index 00000000000..e3f9b1d4dc0
--- /dev/null
+++ b/src/backend/replication/basebackup_zstd.c
@@ -0,0 +1,299 @@
+/*-------------------------------------------------------------------------
+ *
+ * basebackup_zstd.c
+ *	  Basebackup sink implementing zstd compression.
+ *
+ * Portions Copyright (c) 2010-2020, PostgreSQL Global Development Group
+ *
+ * IDENTIFICATION
+ *	  src/backend/replication/basebackup_zstd.c
+ *
+ *-------------------------------------------------------------------------
+ */
+#include "postgres.h"
+
+#ifdef HAVE_LIBZSTD
+#include <zstd.h>
+#endif
+
+#include "replication/basebackup_sink.h"
+
+#ifdef HAVE_LIBZSTD
+
+typedef struct bbsink_zstd
+{
+	/* Common information for all types of sink. */
+	bbsink		base;
+
+	/* Compression level */
+	int			compresslevel;
+
+	ZSTD_CCtx  *cctx;
+	ZSTD_outBuffer zstd_outBuf;
+} bbsink_zstd;
+
+static void bbsink_zstd_begin_backup(bbsink *sink);
+static void bbsink_zstd_begin_archive(bbsink *sink, const char *archive_name);
+static void bbsink_zstd_archive_contents(bbsink *sink, size_t avail_in);
+static void bbsink_zstd_manifest_contents(bbsink *sink, size_t len);
+static void bbsink_zstd_end_archive(bbsink *sink);
+static void bbsink_zstd_cleanup(bbsink *sink);
+static void bbsink_zstd_end_backup(bbsink *sink, XLogRecPtr endptr,
+								   TimeLineID endtli);
+
+const bbsink_ops bbsink_zstd_ops = {
+	.begin_backup = bbsink_zstd_begin_backup,
+	.begin_archive = bbsink_zstd_begin_archive,
+	.archive_contents = bbsink_zstd_archive_contents,
+	.end_archive = bbsink_zstd_end_archive,
+	.begin_manifest = bbsink_forward_begin_manifest,
+	.manifest_contents = bbsink_zstd_manifest_contents,
+	.end_manifest = bbsink_forward_end_manifest,
+	.end_backup = bbsink_zstd_end_backup,
+	.cleanup = bbsink_zstd_cleanup
+};
+#endif
+
+/*
+ * Create a new basebackup sink that performs zstd compression using the
+ * designated compression level.
+ */
+bbsink *
+bbsink_zstd_new(bbsink *next, int compresslevel)
+{
+#ifndef HAVE_LIBZSTD
+	ereport(ERROR,
+			(errcode(ERRCODE_FEATURE_NOT_SUPPORTED),
+			 errmsg("zstd compression is not supported by this build")));
+	return NULL;				/* keep compiler quiet */
+#else
+	bbsink_zstd *sink;
+
+	Assert(next != NULL);
+
+	if (compresslevel < 0 || compresslevel > 22)
+		ereport(ERROR,
+				(errcode(ERRCODE_FEATURE_NOT_SUPPORTED),
+				 errmsg("zstd compression level %d is out of range",
+						compresslevel)));
+
+	sink = palloc0(sizeof(bbsink_zstd));
+	*((const bbsink_ops **) &sink->base.bbs_ops) = &bbsink_zstd_ops;
+	sink->base.bbs_next = next;
+	sink->compresslevel = compresslevel;
+
+	return &sink->base;
+#endif
+}
+
+#ifdef HAVE_LIBZSTD
+
+/*
+ * Begin backup.
+ */
+static void
+bbsink_zstd_begin_backup(bbsink *sink)
+{
+	bbsink_zstd *mysink = (bbsink_zstd *) sink;
+	size_t		output_buffer_bound;
+
+	mysink->cctx = ZSTD_createCCtx();
+	if (!mysink->cctx)
+		elog(ERROR, "could not create zstd compression context");
+
+	ZSTD_CCtx_setParameter(mysink->cctx, ZSTD_c_compressionLevel,
+						   mysink->compresslevel);
+
+	/*
+	 * We need our own buffer, because we're going to pass different data to
+	 * the next sink than what gets passed to us.
+	 */
+	mysink->base.bbs_buffer = palloc(mysink->base.bbs_buffer_length);
+
+	/*
+	 * Make sure that the next sink's bbs_buffer is big enough to accommodate
+	 * the compressed input buffer.
+	 */
+	output_buffer_bound = ZSTD_compressBound(mysink->base.bbs_buffer_length);
+
+	/*
+	 * The buffer length is expected to be a multiple of BLCKSZ, so round up.
+	 */
+	output_buffer_bound = output_buffer_bound + BLCKSZ -
+		(output_buffer_bound % BLCKSZ);
+
+	bbsink_begin_backup(sink->bbs_next, sink->bbs_state, output_buffer_bound);
+}
+
+/*
+ * Prepare to compress the next archive.
+ */
+static void
+bbsink_zstd_begin_archive(bbsink *sink, const char *archive_name)
+{
+	bbsink_zstd *mysink = (bbsink_zstd *) sink;
+	char	   *zstd_archive_name;
+
+	/*
+	 * At the start of each archive we reset the state to start a new
+	 * compression operation. The parameters are sticky and they will stick
+	 * around as we are resetting with option ZSTD_reset_session_only.
+	 */
+	ZSTD_CCtx_reset(mysink->cctx, ZSTD_reset_session_only);
+
+	mysink->zstd_outBuf.dst = mysink->base.bbs_next->bbs_buffer;
+	mysink->zstd_outBuf.size = mysink->base.bbs_next->bbs_buffer_length;
+	mysink->zstd_outBuf.pos = 0;
+
+	/* Add ".zst" to the archive name. */
+	zstd_archive_name = psprintf("%s.zst", archive_name);
+	Assert(sink->bbs_next != NULL);
+	bbsink_begin_archive(sink->bbs_next, zstd_archive_name);
+	pfree(zstd_archive_name);
+}
+
+/*
+ * Compress the input data to the output buffer until we run out of input
+ * data. Each time the output buffer falls below the compression bound for
+ * the input buffer, invoke the archive_contents() method for the next sink.
+ *
+ * Note that since we're compressing the input, it may very commonly happen
+ * that we consume all the input data without filling the output buffer. In
+ * that case, the compressed representation of the current input data won't
+ * actually be sent to the next bbsink until a later call to this function,
+ * or perhaps even not until bbsink_zstd_end_archive() is invoked.
+ */
+static void
+bbsink_zstd_archive_contents(bbsink *sink, size_t len)
+{
+	bbsink_zstd *mysink = (bbsink_zstd *) sink;
+	ZSTD_inBuffer inBuf = {mysink->base.bbs_buffer, len, 0};
+
+	while (inBuf.pos < inBuf.size)
+	{
+		size_t		yet_to_flush;
+		size_t		max_needed = ZSTD_compressBound(inBuf.size - inBuf.pos);
+
+		/*
+		 * If the out buffer is not left with enough space, send the output
+		 * buffer to the next sink, and reset it.
+		 */
+		if (mysink->zstd_outBuf.size - mysink->zstd_outBuf.pos < max_needed)
+		{
+			bbsink_archive_contents(mysink->base.bbs_next,
+									mysink->zstd_outBuf.pos);
+			mysink->zstd_outBuf.dst = mysink->base.bbs_next->bbs_buffer;
+			mysink->zstd_outBuf.size =
+				mysink->base.bbs_next->bbs_buffer_length;
+			mysink->zstd_outBuf.pos = 0;
+		}
+
+		yet_to_flush = ZSTD_compressStream2(mysink->cctx, &mysink->zstd_outBuf,
+											&inBuf, ZSTD_e_continue);
+
+		if (ZSTD_isError(yet_to_flush))
+			elog(ERROR,
+				 "could not compress data: %s",
+				 ZSTD_getErrorName(yet_to_flush));
+	}
+}
+
+/*
+ * There might be some data inside zstd's internal buffers; we need to get that
+ * flushed out, also end the zstd frame and then get that forwarded to the
+ * successor sink as archive content.
+ *
+ * Then we can end processing for this archive.
+ */
+static void
+bbsink_zstd_end_archive(bbsink *sink)
+{
+	bbsink_zstd *mysink = (bbsink_zstd *) sink;
+	size_t		yet_to_flush;
+
+	do
+	{
+		ZSTD_inBuffer in = {NULL, 0, 0};
+		size_t		max_needed = ZSTD_compressBound(0);
+
+		/*
+		 * If the out buffer is not left with enough space, send the output
+		 * buffer to the next sink, and reset it.
+		 */
+		if (mysink->zstd_outBuf.size - mysink->zstd_outBuf.pos < max_needed)
+		{
+			bbsink_archive_contents(mysink->base.bbs_next,
+									mysink->zstd_outBuf.pos);
+			mysink->zstd_outBuf.dst = mysink->base.bbs_next->bbs_buffer;
+			mysink->zstd_outBuf.size =
+				mysink->base.bbs_next->bbs_buffer_length;
+			mysink->zstd_outBuf.pos = 0;
+		}
+
+		yet_to_flush = ZSTD_compressStream2(mysink->cctx,
+											&mysink->zstd_outBuf,
+											&in, ZSTD_e_end);
+
+		if (ZSTD_isError(yet_to_flush))
+			elog(ERROR, "could not compress data: %s",
+				 ZSTD_getErrorName(yet_to_flush));
+
+	} while (yet_to_flush > 0);
+
+	/* Make sure to pass any remaining bytes to the next sink. */
+	if (mysink->zstd_outBuf.pos > 0)
+		bbsink_archive_contents(mysink->base.bbs_next,
+								mysink->zstd_outBuf.pos);
+
+	/* Pass on the information that this archive has ended. */
+	bbsink_forward_end_archive(sink);
+}
+
+/*
+ * Free the resources and context.
+ */
+static void
+bbsink_zstd_end_backup(bbsink *sink, XLogRecPtr endptr,
+					   TimeLineID endtli)
+{
+	bbsink_zstd *mysink = (bbsink_zstd *) sink;
+
+	/* Release the context. */
+	if (mysink->cctx)
+	{
+		ZSTD_freeCCtx(mysink->cctx);
+		mysink->cctx = NULL;
+	}
+
+	bbsink_forward_end_backup(sink, endptr, endtli);
+}
+
+/*
+ * Manifest contents are not compressed, but we do need to copy them into
+ * the successor sink's buffer, because we have our own.
+ */
+static void
+bbsink_zstd_manifest_contents(bbsink *sink, size_t len)
+{
+	memcpy(sink->bbs_next->bbs_buffer, sink->bbs_buffer, len);
+	bbsink_manifest_contents(sink->bbs_next, len);
+}
+
+/*
+ * In case the backup fails, make sure we free any compression context that
+ * got allocated, so that we don't leak memory.
+ */
+static void
+bbsink_zstd_cleanup(bbsink *sink)
+{
+	bbsink_zstd *mysink = (bbsink_zstd *) sink;
+
+	/* Release the context if not already released. */
+	if (mysink->cctx)
+	{
+		ZSTD_freeCCtx(mysink->cctx);
+		mysink->cctx = NULL;
+	}
+}
+
+#endif