diff options
Diffstat (limited to 'src/backend/access/transam/xlog.c')
| -rw-r--r-- | src/backend/access/transam/xlog.c | 330 |
1 files changed, 165 insertions, 165 deletions
diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 106210a8839..48eecfc84a1 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -1432,7 +1432,7 @@ checkXLogConsistency(XLogReaderState *record) if (memcmp(replay_image_masked, master_image_masked, BLCKSZ) != 0) { elog(FATAL, - "inconsistent page found, rel %u/%u/%u, forknum %u, blkno %u", + "inconsistent page found, rel %u/%u/%u, forknum %u, blkno %u", rnode.spcNode, rnode.dbNode, rnode.relNode, forknum, blkno); } @@ -1677,7 +1677,7 @@ WALInsertLockUpdateInsertingAt(XLogRecPtr insertingAt) * WALInsertLockAcquireExclusive. */ LWLockUpdateVar(&WALInsertLocks[NUM_XLOGINSERT_LOCKS - 1].l.lock, - &WALInsertLocks[NUM_XLOGINSERT_LOCKS - 1].l.insertingAt, + &WALInsertLocks[NUM_XLOGINSERT_LOCKS - 1].l.insertingAt, insertingAt); } else @@ -2452,9 +2452,9 @@ XLogWrite(XLogwrtRqst WriteRqst, bool flexible) if (lseek(openLogFile, (off_t) startoffset, SEEK_SET) < 0) ereport(PANIC, (errcode_for_file_access(), - errmsg("could not seek in log file %s to offset %u: %m", - XLogFileNameP(ThisTimeLineID, openLogSegNo), - startoffset))); + errmsg("could not seek in log file %s to offset %u: %m", + XLogFileNameP(ThisTimeLineID, openLogSegNo), + startoffset))); openLogOff = startoffset; } @@ -2476,7 +2476,7 @@ XLogWrite(XLogwrtRqst WriteRqst, bool flexible) (errcode_for_file_access(), errmsg("could not write to log file %s " "at offset %u, length %zu: %m", - XLogFileNameP(ThisTimeLineID, openLogSegNo), + XLogFileNameP(ThisTimeLineID, openLogSegNo), openLogOff, nbytes))); } nleft -= written; @@ -2723,7 +2723,7 @@ UpdateMinRecoveryPoint(XLogRecPtr lsn, bool force) if (!force && newMinRecoveryPoint < lsn) elog(WARNING, - "xlog min recovery request %X/%X is past current point %X/%X", + "xlog min recovery request %X/%X is past current point %X/%X", (uint32) (lsn >> 32), (uint32) lsn, (uint32) (newMinRecoveryPoint >> 32), (uint32) newMinRecoveryPoint); @@ -2738,10 +2738,10 @@ UpdateMinRecoveryPoint(XLogRecPtr lsn, bool force) minRecoveryPointTLI = newMinRecoveryPointTLI; ereport(DEBUG2, - (errmsg("updated min recovery point to %X/%X on timeline %u", - (uint32) (minRecoveryPoint >> 32), - (uint32) minRecoveryPoint, - newMinRecoveryPointTLI))); + (errmsg("updated min recovery point to %X/%X on timeline %u", + (uint32) (minRecoveryPoint >> 32), + (uint32) minRecoveryPoint, + newMinRecoveryPointTLI))); } } LWLockRelease(ControlFileLock); @@ -2781,7 +2781,7 @@ XLogFlush(XLogRecPtr record) elog(LOG, "xlog flush request %X/%X; write %X/%X; flush %X/%X", (uint32) (record >> 32), (uint32) record, (uint32) (LogwrtResult.Write >> 32), (uint32) LogwrtResult.Write, - (uint32) (LogwrtResult.Flush >> 32), (uint32) LogwrtResult.Flush); + (uint32) (LogwrtResult.Flush >> 32), (uint32) LogwrtResult.Flush); #endif START_CRIT_SECTION(); @@ -2913,9 +2913,9 @@ XLogFlush(XLogRecPtr record) */ if (LogwrtResult.Flush < record) elog(ERROR, - "xlog flush request %X/%X is not satisfied --- flushed only to %X/%X", + "xlog flush request %X/%X is not satisfied --- flushed only to %X/%X", (uint32) (record >> 32), (uint32) record, - (uint32) (LogwrtResult.Flush >> 32), (uint32) LogwrtResult.Flush); + (uint32) (LogwrtResult.Flush >> 32), (uint32) LogwrtResult.Flush); } /* @@ -3032,7 +3032,7 @@ XLogBackgroundFlush(void) (uint32) (WriteRqst.Write >> 32), (uint32) WriteRqst.Write, (uint32) (WriteRqst.Flush >> 32), (uint32) WriteRqst.Flush, (uint32) (LogwrtResult.Write >> 32), (uint32) LogwrtResult.Write, - (uint32) (LogwrtResult.Flush >> 32), (uint32) LogwrtResult.Flush); + (uint32) (LogwrtResult.Flush >> 32), (uint32) LogwrtResult.Flush); #endif START_CRIT_SECTION(); @@ -3531,7 +3531,7 @@ XLogFileOpen(XLogSegNo segno) if (fd < 0) ereport(PANIC, (errcode_for_file_access(), - errmsg("could not open write-ahead log file \"%s\": %m", path))); + errmsg("could not open write-ahead log file \"%s\": %m", path))); return fd; } @@ -4025,8 +4025,8 @@ RemoveXlogFile(const char *segname, XLogRecPtr PriorRedoPtr, XLogRecPtr endptr) { ereport(LOG, (errcode_for_file_access(), - errmsg("could not rename old write-ahead log file \"%s\": %m", - path))); + errmsg("could not rename old write-ahead log file \"%s\": %m", + path))); return; } rc = durable_unlink(newpath, LOG); @@ -4180,7 +4180,7 @@ ReadRecord(XLogReaderState *xlogreader, XLogRecPtr RecPtr, int emode, if (errormsg) ereport(emode_for_corrupt_record(emode, RecPtr ? RecPtr : EndRecPtr), - (errmsg_internal("%s", errormsg) /* already translated */ )); + (errmsg_internal("%s", errormsg) /* already translated */ )); } /* @@ -4197,10 +4197,10 @@ ReadRecord(XLogReaderState *xlogreader, XLogRecPtr RecPtr, int emode, XLogFileName(fname, xlogreader->readPageTLI, segno); ereport(emode_for_corrupt_record(emode, RecPtr ? RecPtr : EndRecPtr), - (errmsg("unexpected timeline ID %u in log segment %s, offset %u", - xlogreader->latestPageTLI, - fname, - offset))); + (errmsg("unexpected timeline ID %u in log segment %s, offset %u", + xlogreader->latestPageTLI, + fname, + offset))); record = NULL; } @@ -4494,8 +4494,8 @@ ReadControlFile(void) ereport(FATAL, (errmsg("database files are incompatible with server"), errdetail("The database cluster was initialized with PG_CONTROL_VERSION %d (0x%08x)," - " but the server was compiled with PG_CONTROL_VERSION %d (0x%08x).", - ControlFile->pg_control_version, ControlFile->pg_control_version, + " but the server was compiled with PG_CONTROL_VERSION %d (0x%08x).", + ControlFile->pg_control_version, ControlFile->pg_control_version, PG_CONTROL_VERSION, PG_CONTROL_VERSION), errhint("This could be a problem of mismatched byte ordering. It looks like you need to initdb."))); @@ -4503,8 +4503,8 @@ ReadControlFile(void) ereport(FATAL, (errmsg("database files are incompatible with server"), errdetail("The database cluster was initialized with PG_CONTROL_VERSION %d," - " but the server was compiled with PG_CONTROL_VERSION %d.", - ControlFile->pg_control_version, PG_CONTROL_VERSION), + " but the server was compiled with PG_CONTROL_VERSION %d.", + ControlFile->pg_control_version, PG_CONTROL_VERSION), errhint("It looks like you need to initdb."))); /* Now check the CRC. */ @@ -4527,15 +4527,15 @@ ReadControlFile(void) ereport(FATAL, (errmsg("database files are incompatible with server"), errdetail("The database cluster was initialized with CATALOG_VERSION_NO %d," - " but the server was compiled with CATALOG_VERSION_NO %d.", - ControlFile->catalog_version_no, CATALOG_VERSION_NO), + " but the server was compiled with CATALOG_VERSION_NO %d.", + ControlFile->catalog_version_no, CATALOG_VERSION_NO), errhint("It looks like you need to initdb."))); if (ControlFile->maxAlign != MAXIMUM_ALIGNOF) ereport(FATAL, (errmsg("database files are incompatible with server"), - errdetail("The database cluster was initialized with MAXALIGN %d," - " but the server was compiled with MAXALIGN %d.", - ControlFile->maxAlign, MAXIMUM_ALIGNOF), + errdetail("The database cluster was initialized with MAXALIGN %d," + " but the server was compiled with MAXALIGN %d.", + ControlFile->maxAlign, MAXIMUM_ALIGNOF), errhint("It looks like you need to initdb."))); if (ControlFile->floatFormat != FLOATFORMAT_VALUE) ereport(FATAL, @@ -4545,58 +4545,58 @@ ReadControlFile(void) if (ControlFile->blcksz != BLCKSZ) ereport(FATAL, (errmsg("database files are incompatible with server"), - errdetail("The database cluster was initialized with BLCKSZ %d," - " but the server was compiled with BLCKSZ %d.", - ControlFile->blcksz, BLCKSZ), + errdetail("The database cluster was initialized with BLCKSZ %d," + " but the server was compiled with BLCKSZ %d.", + ControlFile->blcksz, BLCKSZ), errhint("It looks like you need to recompile or initdb."))); if (ControlFile->relseg_size != RELSEG_SIZE) ereport(FATAL, (errmsg("database files are incompatible with server"), - errdetail("The database cluster was initialized with RELSEG_SIZE %d," - " but the server was compiled with RELSEG_SIZE %d.", - ControlFile->relseg_size, RELSEG_SIZE), + errdetail("The database cluster was initialized with RELSEG_SIZE %d," + " but the server was compiled with RELSEG_SIZE %d.", + ControlFile->relseg_size, RELSEG_SIZE), errhint("It looks like you need to recompile or initdb."))); if (ControlFile->xlog_blcksz != XLOG_BLCKSZ) ereport(FATAL, (errmsg("database files are incompatible with server"), - errdetail("The database cluster was initialized with XLOG_BLCKSZ %d," - " but the server was compiled with XLOG_BLCKSZ %d.", - ControlFile->xlog_blcksz, XLOG_BLCKSZ), + errdetail("The database cluster was initialized with XLOG_BLCKSZ %d," + " but the server was compiled with XLOG_BLCKSZ %d.", + ControlFile->xlog_blcksz, XLOG_BLCKSZ), errhint("It looks like you need to recompile or initdb."))); if (ControlFile->xlog_seg_size != XLOG_SEG_SIZE) ereport(FATAL, (errmsg("database files are incompatible with server"), errdetail("The database cluster was initialized with XLOG_SEG_SIZE %d," - " but the server was compiled with XLOG_SEG_SIZE %d.", + " but the server was compiled with XLOG_SEG_SIZE %d.", ControlFile->xlog_seg_size, XLOG_SEG_SIZE), errhint("It looks like you need to recompile or initdb."))); if (ControlFile->nameDataLen != NAMEDATALEN) ereport(FATAL, (errmsg("database files are incompatible with server"), - errdetail("The database cluster was initialized with NAMEDATALEN %d," - " but the server was compiled with NAMEDATALEN %d.", - ControlFile->nameDataLen, NAMEDATALEN), + errdetail("The database cluster was initialized with NAMEDATALEN %d," + " but the server was compiled with NAMEDATALEN %d.", + ControlFile->nameDataLen, NAMEDATALEN), errhint("It looks like you need to recompile or initdb."))); if (ControlFile->indexMaxKeys != INDEX_MAX_KEYS) ereport(FATAL, (errmsg("database files are incompatible with server"), errdetail("The database cluster was initialized with INDEX_MAX_KEYS %d," - " but the server was compiled with INDEX_MAX_KEYS %d.", + " but the server was compiled with INDEX_MAX_KEYS %d.", ControlFile->indexMaxKeys, INDEX_MAX_KEYS), errhint("It looks like you need to recompile or initdb."))); if (ControlFile->toast_max_chunk_size != TOAST_MAX_CHUNK_SIZE) ereport(FATAL, (errmsg("database files are incompatible with server"), errdetail("The database cluster was initialized with TOAST_MAX_CHUNK_SIZE %d," - " but the server was compiled with TOAST_MAX_CHUNK_SIZE %d.", - ControlFile->toast_max_chunk_size, (int) TOAST_MAX_CHUNK_SIZE), + " but the server was compiled with TOAST_MAX_CHUNK_SIZE %d.", + ControlFile->toast_max_chunk_size, (int) TOAST_MAX_CHUNK_SIZE), errhint("It looks like you need to recompile or initdb."))); if (ControlFile->loblksize != LOBLKSIZE) ereport(FATAL, (errmsg("database files are incompatible with server"), - errdetail("The database cluster was initialized with LOBLKSIZE %d," - " but the server was compiled with LOBLKSIZE %d.", - ControlFile->loblksize, (int) LOBLKSIZE), + errdetail("The database cluster was initialized with LOBLKSIZE %d," + " but the server was compiled with LOBLKSIZE %d.", + ControlFile->loblksize, (int) LOBLKSIZE), errhint("It looks like you need to recompile or initdb."))); #ifdef USE_FLOAT4_BYVAL @@ -4604,14 +4604,14 @@ ReadControlFile(void) ereport(FATAL, (errmsg("database files are incompatible with server"), errdetail("The database cluster was initialized without USE_FLOAT4_BYVAL" - " but the server was compiled with USE_FLOAT4_BYVAL."), + " but the server was compiled with USE_FLOAT4_BYVAL."), errhint("It looks like you need to recompile or initdb."))); #else if (ControlFile->float4ByVal != false) ereport(FATAL, (errmsg("database files are incompatible with server"), - errdetail("The database cluster was initialized with USE_FLOAT4_BYVAL" - " but the server was compiled without USE_FLOAT4_BYVAL."), + errdetail("The database cluster was initialized with USE_FLOAT4_BYVAL" + " but the server was compiled without USE_FLOAT4_BYVAL."), errhint("It looks like you need to recompile or initdb."))); #endif @@ -4620,14 +4620,14 @@ ReadControlFile(void) ereport(FATAL, (errmsg("database files are incompatible with server"), errdetail("The database cluster was initialized without USE_FLOAT8_BYVAL" - " but the server was compiled with USE_FLOAT8_BYVAL."), + " but the server was compiled with USE_FLOAT8_BYVAL."), errhint("It looks like you need to recompile or initdb."))); #else if (ControlFile->float8ByVal != false) ereport(FATAL, (errmsg("database files are incompatible with server"), - errdetail("The database cluster was initialized with USE_FLOAT8_BYVAL" - " but the server was compiled without USE_FLOAT8_BYVAL."), + errdetail("The database cluster was initialized with USE_FLOAT8_BYVAL" + " but the server was compiled without USE_FLOAT8_BYVAL."), errhint("It looks like you need to recompile or initdb."))); #endif @@ -5072,7 +5072,7 @@ BootStrapXLOG(void) errno = ENOSPC; ereport(PANIC, (errcode_for_file_access(), - errmsg("could not write bootstrap write-ahead log file: %m"))); + errmsg("could not write bootstrap write-ahead log file: %m"))); } pgstat_report_wait_end(); @@ -5080,13 +5080,13 @@ BootStrapXLOG(void) if (pg_fsync(openLogFile) != 0) ereport(PANIC, (errcode_for_file_access(), - errmsg("could not fsync bootstrap write-ahead log file: %m"))); + errmsg("could not fsync bootstrap write-ahead log file: %m"))); pgstat_report_wait_end(); if (close(openLogFile)) ereport(PANIC, (errcode_for_file_access(), - errmsg("could not close bootstrap write-ahead log file: %m"))); + errmsg("could not close bootstrap write-ahead log file: %m"))); openLogFile = -1; @@ -5208,9 +5208,9 @@ readRecoveryCommandFile(void) else ereport(ERROR, (errcode(ERRCODE_INVALID_PARAMETER_VALUE), - errmsg("invalid value for recovery parameter \"%s\": \"%s\"", - "recovery_target_action", - item->value), + errmsg("invalid value for recovery parameter \"%s\": \"%s\"", + "recovery_target_action", + item->value), errhint("Valid values are \"pause\", \"promote\", and \"shutdown\"."))); ereport(DEBUG2, @@ -5236,10 +5236,10 @@ readRecoveryCommandFile(void) } if (rtli) ereport(DEBUG2, - (errmsg_internal("recovery_target_timeline = %u", rtli))); + (errmsg_internal("recovery_target_timeline = %u", rtli))); else ereport(DEBUG2, - (errmsg_internal("recovery_target_timeline = latest"))); + (errmsg_internal("recovery_target_timeline = latest"))); } else if (strcmp(item->name, "recovery_target_xid") == 0) { @@ -5248,8 +5248,8 @@ readRecoveryCommandFile(void) if (errno == EINVAL || errno == ERANGE) ereport(FATAL, (errcode(ERRCODE_INVALID_PARAMETER_VALUE), - errmsg("recovery_target_xid is not a valid number: \"%s\"", - item->value))); + errmsg("recovery_target_xid is not a valid number: \"%s\"", + item->value))); ereport(DEBUG2, (errmsg_internal("recovery_target_xid = %u", recoveryTargetXid))); @@ -5264,12 +5264,12 @@ readRecoveryCommandFile(void) */ recoveryTargetTime = DatumGetTimestampTz(DirectFunctionCall3(timestamptz_in, - CStringGetDatum(item->value), - ObjectIdGetDatum(InvalidOid), + CStringGetDatum(item->value), + ObjectIdGetDatum(InvalidOid), Int32GetDatum(-1))); ereport(DEBUG2, (errmsg_internal("recovery_target_time = '%s'", - timestamptz_to_str(recoveryTargetTime)))); + timestamptz_to_str(recoveryTargetTime)))); } else if (strcmp(item->name, "recovery_target_name") == 0) { @@ -5310,10 +5310,10 @@ readRecoveryCommandFile(void) else ereport(ERROR, (errcode(ERRCODE_INVALID_PARAMETER_VALUE), - errmsg("invalid value for recovery parameter \"%s\": \"%s\"", - "recovery_target", - item->value), - errhint("The only allowed value is \"immediate\"."))); + errmsg("invalid value for recovery parameter \"%s\": \"%s\"", + "recovery_target", + item->value), + errhint("The only allowed value is \"immediate\"."))); ereport(DEBUG2, (errmsg_internal("recovery_target = '%s'", item->value))); @@ -5422,7 +5422,7 @@ readRecoveryCommandFile(void) if (StandbyModeRequested && !IsUnderPostmaster) ereport(FATAL, (errcode(ERRCODE_FEATURE_NOT_SUPPORTED), - errmsg("standby mode is not supported by single-user servers"))); + errmsg("standby mode is not supported by single-user servers"))); /* Enable fetching from archive recovery area */ ArchiveRecoveryRequested = true; @@ -5642,9 +5642,9 @@ recoveryStopsBefore(XLogReaderState *record) recoveryStopTime = 0; recoveryStopName[0] = '\0'; ereport(LOG, - (errmsg("recovery stopping before WAL location (LSN) \"%X/%X\"", - (uint32) (recoveryStopLSN >> 32), - (uint32) recoveryStopLSN))); + (errmsg("recovery stopping before WAL location (LSN) \"%X/%X\"", + (uint32) (recoveryStopLSN >> 32), + (uint32) recoveryStopLSN))); return true; } @@ -5781,9 +5781,9 @@ recoveryStopsAfter(XLogReaderState *record) strlcpy(recoveryStopName, recordRestorePointData->rp_name, MAXFNAMELEN); ereport(LOG, - (errmsg("recovery stopping at restore point \"%s\", time %s", - recoveryStopName, - timestamptz_to_str(recoveryStopTime)))); + (errmsg("recovery stopping at restore point \"%s\", time %s", + recoveryStopName, + timestamptz_to_str(recoveryStopTime)))); return true; } } @@ -5799,9 +5799,9 @@ recoveryStopsAfter(XLogReaderState *record) recoveryStopTime = 0; recoveryStopName[0] = '\0'; ereport(LOG, - (errmsg("recovery stopping after WAL location (LSN) \"%X/%X\"", - (uint32) (recoveryStopLSN >> 32), - (uint32) recoveryStopLSN))); + (errmsg("recovery stopping after WAL location (LSN) \"%X/%X\"", + (uint32) (recoveryStopLSN >> 32), + (uint32) recoveryStopLSN))); return true; } @@ -6239,20 +6239,20 @@ StartupXLOG(void) str_time(ControlFile->time)))); else if (ControlFile->state == DB_IN_CRASH_RECOVERY) ereport(LOG, - (errmsg("database system was interrupted while in recovery at %s", - str_time(ControlFile->time)), - errhint("This probably means that some data is corrupted and" - " you will have to use the last backup for recovery."))); + (errmsg("database system was interrupted while in recovery at %s", + str_time(ControlFile->time)), + errhint("This probably means that some data is corrupted and" + " you will have to use the last backup for recovery."))); else if (ControlFile->state == DB_IN_ARCHIVE_RECOVERY) ereport(LOG, (errmsg("database system was interrupted while in recovery at log time %s", str_time(ControlFile->checkPointCopy.time)), errhint("If this has occurred more than once some data might be corrupted" - " and you might need to choose an earlier recovery target."))); + " and you might need to choose an earlier recovery target."))); else if (ControlFile->state == DB_IN_PRODUCTION) ereport(LOG, - (errmsg("database system was interrupted; last known up at %s", - str_time(ControlFile->time)))); + (errmsg("database system was interrupted; last known up at %s", + str_time(ControlFile->time)))); /* This is just to allow attaching to startup process with a debugger */ #ifdef XLOG_REPLAY_DELAY @@ -6347,7 +6347,7 @@ StartupXLOG(void) ereport(ERROR, (errcode(ERRCODE_OUT_OF_MEMORY), errmsg("out of memory"), - errdetail("Failed while allocating a WAL reading processor."))); + errdetail("Failed while allocating a WAL reading processor."))); xlogreader->system_identifier = ControlFile->system_identifier; /* @@ -6382,7 +6382,7 @@ StartupXLOG(void) wasShutdown = ((record->xl_info & ~XLR_INFO_MASK) == XLOG_CHECKPOINT_SHUTDOWN); ereport(DEBUG1, (errmsg("checkpoint record is at %X/%X", - (uint32) (checkPointLoc >> 32), (uint32) checkPointLoc))); + (uint32) (checkPointLoc >> 32), (uint32) checkPointLoc))); InRecovery = true; /* force recovery even if SHUTDOWNED */ /* @@ -6428,8 +6428,8 @@ StartupXLOG(void) if (symlink(ti->path, linkloc) < 0) ereport(ERROR, (errcode_for_file_access(), - errmsg("could not create symbolic link \"%s\": %m", - linkloc))); + errmsg("could not create symbolic link \"%s\": %m", + linkloc))); pfree(ti->oid); pfree(ti->path); @@ -6460,16 +6460,16 @@ StartupXLOG(void) unlink(TABLESPACE_MAP_OLD); if (durable_rename(TABLESPACE_MAP, TABLESPACE_MAP_OLD, DEBUG1) == 0) ereport(LOG, - (errmsg("ignoring file \"%s\" because no file \"%s\" exists", - TABLESPACE_MAP, BACKUP_LABEL_FILE), - errdetail("File \"%s\" was renamed to \"%s\".", - TABLESPACE_MAP, TABLESPACE_MAP_OLD))); + (errmsg("ignoring file \"%s\" because no file \"%s\" exists", + TABLESPACE_MAP, BACKUP_LABEL_FILE), + errdetail("File \"%s\" was renamed to \"%s\".", + TABLESPACE_MAP, TABLESPACE_MAP_OLD))); else ereport(LOG, - (errmsg("ignoring file \"%s\" because no file \"%s\" exists", - TABLESPACE_MAP, BACKUP_LABEL_FILE), - errdetail("Could not rename file \"%s\" to \"%s\": %m.", - TABLESPACE_MAP, TABLESPACE_MAP_OLD))); + (errmsg("ignoring file \"%s\" because no file \"%s\" exists", + TABLESPACE_MAP, BACKUP_LABEL_FILE), + errdetail("Could not rename file \"%s\" to \"%s\": %m.", + TABLESPACE_MAP, TABLESPACE_MAP_OLD))); } /* @@ -6510,7 +6510,7 @@ StartupXLOG(void) { ereport(DEBUG1, (errmsg("checkpoint record is at %X/%X", - (uint32) (checkPointLoc >> 32), (uint32) checkPointLoc))); + (uint32) (checkPointLoc >> 32), (uint32) checkPointLoc))); } else if (StandbyMode) { @@ -6529,12 +6529,12 @@ StartupXLOG(void) { ereport(LOG, (errmsg("using previous checkpoint record at %X/%X", - (uint32) (checkPointLoc >> 32), (uint32) checkPointLoc))); + (uint32) (checkPointLoc >> 32), (uint32) checkPointLoc))); InRecovery = true; /* force recovery even if SHUTDOWNED */ } else ereport(PANIC, - (errmsg("could not locate a valid checkpoint record"))); + (errmsg("could not locate a valid checkpoint record"))); } memcpy(&checkPoint, XLogRecGetData(xlogreader), sizeof(CheckPoint)); wasShutdown = ((record->xl_info & ~XLR_INFO_MASK) == XLOG_CHECKPOINT_SHUTDOWN); @@ -6587,7 +6587,7 @@ StartupXLOG(void) * history, too. */ if (!XLogRecPtrIsInvalid(ControlFile->minRecoveryPoint) && - tliOfPointInHistory(ControlFile->minRecoveryPoint - 1, expectedTLEs) != + tliOfPointInHistory(ControlFile->minRecoveryPoint - 1, expectedTLEs) != ControlFile->minRecoveryPointTLI) ereport(FATAL, (errmsg("requested timeline %u does not contain minimum recovery point %X/%X on timeline %u", @@ -6600,7 +6600,7 @@ StartupXLOG(void) ereport(DEBUG1, (errmsg_internal("redo record is at %X/%X; shutdown %s", - (uint32) (checkPoint.redo >> 32), (uint32) checkPoint.redo, + (uint32) (checkPoint.redo >> 32), (uint32) checkPoint.redo, wasShutdown ? "TRUE" : "FALSE"))); ereport(DEBUG1, (errmsg_internal("next transaction ID: %u:%u; next OID: %u", @@ -6608,13 +6608,13 @@ StartupXLOG(void) checkPoint.nextOid))); ereport(DEBUG1, (errmsg_internal("next MultiXactId: %u; next MultiXactOffset: %u", - checkPoint.nextMulti, checkPoint.nextMultiOffset))); + checkPoint.nextMulti, checkPoint.nextMultiOffset))); ereport(DEBUG1, - (errmsg_internal("oldest unfrozen transaction ID: %u, in database %u", - checkPoint.oldestXid, checkPoint.oldestXidDB))); + (errmsg_internal("oldest unfrozen transaction ID: %u, in database %u", + checkPoint.oldestXid, checkPoint.oldestXidDB))); ereport(DEBUG1, (errmsg_internal("oldest MultiXactId: %u, in database %u", - checkPoint.oldestMulti, checkPoint.oldestMultiDB))); + checkPoint.oldestMulti, checkPoint.oldestMultiDB))); ereport(DEBUG1, (errmsg_internal("commit timestamp Xid oldest/newest: %u/%u", checkPoint.oldestCommitTsXid, @@ -6804,7 +6804,7 @@ StartupXLOG(void) ereport(FATAL, (errmsg("backup_label contains data inconsistent with control file"), errhint("This means that the backup is corrupted and you will " - "have to use another backup for recovery."))); + "have to use another backup for recovery."))); ControlFile->backupEndPoint = ControlFile->minRecoveryPoint; } } @@ -7010,7 +7010,7 @@ StartupXLOG(void) ereport(LOG, (errmsg("redo starts at %X/%X", - (uint32) (ReadRecPtr >> 32), (uint32) ReadRecPtr))); + (uint32) (ReadRecPtr >> 32), (uint32) ReadRecPtr))); /* * main redo apply loop @@ -7021,15 +7021,15 @@ StartupXLOG(void) #ifdef WAL_DEBUG if (XLOG_DEBUG || - (rmid == RM_XACT_ID && trace_recovery_messages <= DEBUG2) || + (rmid == RM_XACT_ID && trace_recovery_messages <= DEBUG2) || (rmid != RM_XACT_ID && trace_recovery_messages <= DEBUG3)) { StringInfoData buf; initStringInfo(&buf); appendStringInfo(&buf, "REDO @ %X/%X; LSN %X/%X: ", - (uint32) (ReadRecPtr >> 32), (uint32) ReadRecPtr, - (uint32) (EndRecPtr >> 32), (uint32) EndRecPtr); + (uint32) (ReadRecPtr >> 32), (uint32) ReadRecPtr, + (uint32) (EndRecPtr >> 32), (uint32) EndRecPtr); xlog_outrec(&buf, xlogreader); appendStringInfoString(&buf, " - "); xlog_outdesc(&buf, xlogreader); @@ -7282,12 +7282,12 @@ StartupXLOG(void) ereport(LOG, (errmsg("redo done at %X/%X", - (uint32) (ReadRecPtr >> 32), (uint32) ReadRecPtr))); + (uint32) (ReadRecPtr >> 32), (uint32) ReadRecPtr))); xtime = GetLatestXTime(); if (xtime) ereport(LOG, - (errmsg("last completed transaction was at log time %s", - timestamptz_to_str(xtime)))); + (errmsg("last completed transaction was at log time %s", + timestamptz_to_str(xtime)))); InRedo = false; } @@ -7378,7 +7378,7 @@ StartupXLOG(void) errhint("Online backup started with pg_start_backup() must be ended with pg_stop_backup(), and all WAL up to that point must be available at recovery."))); else ereport(FATAL, - (errmsg("WAL ends before consistent recovery point"))); + (errmsg("WAL ends before consistent recovery point"))); } } @@ -8026,7 +8026,7 @@ ReadCheckpointRecord(XLogReaderState *xlogreader, XLogRecPtr RecPtr, { case 1: ereport(LOG, - (errmsg("invalid primary checkpoint link in control file"))); + (errmsg("invalid primary checkpoint link in control file"))); break; case 2: ereport(LOG, @@ -8034,7 +8034,7 @@ ReadCheckpointRecord(XLogReaderState *xlogreader, XLogRecPtr RecPtr, break; default: ereport(LOG, - (errmsg("invalid checkpoint link in backup_label file"))); + (errmsg("invalid checkpoint link in backup_label file"))); break; } return NULL; @@ -8078,7 +8078,7 @@ ReadCheckpointRecord(XLogReaderState *xlogreader, XLogRecPtr RecPtr, break; default: ereport(LOG, - (errmsg("invalid resource manager ID in checkpoint record"))); + (errmsg("invalid resource manager ID in checkpoint record"))); break; } return NULL; @@ -8091,11 +8091,11 @@ ReadCheckpointRecord(XLogReaderState *xlogreader, XLogRecPtr RecPtr, { case 1: ereport(LOG, - (errmsg("invalid xl_info in primary checkpoint record"))); + (errmsg("invalid xl_info in primary checkpoint record"))); break; case 2: ereport(LOG, - (errmsg("invalid xl_info in secondary checkpoint record"))); + (errmsg("invalid xl_info in secondary checkpoint record"))); break; default: ereport(LOG, @@ -8110,11 +8110,11 @@ ReadCheckpointRecord(XLogReaderState *xlogreader, XLogRecPtr RecPtr, { case 1: ereport(LOG, - (errmsg("invalid length of primary checkpoint record"))); + (errmsg("invalid length of primary checkpoint record"))); break; case 2: ereport(LOG, - (errmsg("invalid length of secondary checkpoint record"))); + (errmsg("invalid length of secondary checkpoint record"))); break; default: ereport(LOG, @@ -9099,7 +9099,7 @@ CreateRestartPoint(int flags) if (!RecoveryInProgress()) { ereport(DEBUG2, - (errmsg("skipping restartpoint, recovery has already ended"))); + (errmsg("skipping restartpoint, recovery has already ended"))); LWLockRelease(CheckpointLock); return false; } @@ -9299,9 +9299,9 @@ CreateRestartPoint(int flags) xtime = GetLatestXTime(); ereport((log_checkpoints ? LOG : DEBUG2), (errmsg("recovery restart point at %X/%X", - (uint32) (lastCheckPoint.redo >> 32), (uint32) lastCheckPoint.redo), - xtime ? errdetail("last completed transaction was at log time %s", - timestamptz_to_str(xtime)) : 0)); + (uint32) (lastCheckPoint.redo >> 32), (uint32) lastCheckPoint.redo), + xtime ? errdetail("last completed transaction was at log time %s", + timestamptz_to_str(xtime)) : 0)); LWLockRelease(CheckpointLock); @@ -9573,8 +9573,8 @@ checkTimeLineSwitch(XLogRecPtr lsn, TimeLineID newTLI, TimeLineID prevTLI) */ if (newTLI < ThisTimeLineID || !tliInHistory(newTLI, expectedTLEs)) ereport(PANIC, - (errmsg("unexpected timeline ID %u (after %u) in checkpoint record", - newTLI, ThisTimeLineID))); + (errmsg("unexpected timeline ID %u (after %u) in checkpoint record", + newTLI, ThisTimeLineID))); /* * If we have not yet reached min recovery point, and we're about to @@ -9665,7 +9665,7 @@ xlog_redo(XLogReaderState *record) !XLogRecPtrIsInvalid(ControlFile->backupStartPoint) && XLogRecPtrIsInvalid(ControlFile->backupEndPoint)) ereport(PANIC, - (errmsg("online backup was canceled, recovery cannot continue"))); + (errmsg("online backup was canceled, recovery cannot continue"))); /* * If we see a shutdown checkpoint, we know that nothing was running @@ -10068,7 +10068,7 @@ assign_xlog_sync_method(int new_sync_method, void *extra) ereport(PANIC, (errcode_for_file_access(), errmsg("could not fsync log segment %s: %m", - XLogFileNameP(ThisTimeLineID, openLogSegNo)))); + XLogFileNameP(ThisTimeLineID, openLogSegNo)))); pgstat_report_wait_end(); if (get_sync_bit(sync_method) != get_sync_bit(new_sync_method)) XLogFileClose(); @@ -10100,8 +10100,8 @@ issue_xlog_fsync(int fd, XLogSegNo segno) if (pg_fsync_writethrough(fd) != 0) ereport(PANIC, (errcode_for_file_access(), - errmsg("could not fsync write-through log file %s: %m", - XLogFileNameP(ThisTimeLineID, segno)))); + errmsg("could not fsync write-through log file %s: %m", + XLogFileNameP(ThisTimeLineID, segno)))); break; #endif #ifdef HAVE_FDATASYNC @@ -10209,7 +10209,7 @@ do_pg_start_backup(const char *backupidstr, bool fast, TimeLineID *starttli_p, if (!backup_started_in_recovery && !XLogIsNeeded()) ereport(ERROR, (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE), - errmsg("WAL level not sufficient for making an online backup"), + errmsg("WAL level not sufficient for making an online backup"), errhint("wal_level must be set to \"replica\" or \"logical\" at server start."))); if (strlen(backupidstr) > MAXPGPATH) @@ -10347,13 +10347,13 @@ do_pg_start_backup(const char *backupidstr, bool fast, TimeLineID *starttli_p, if (!checkpointfpw || startpoint <= recptr) ereport(ERROR, - (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE), - errmsg("WAL generated with full_page_writes=off was replayed " - "since last restartpoint"), - errhint("This means that the backup being taken on the standby " - "is corrupt and should not be used. " - "Enable full_page_writes and run CHECKPOINT on the master, " - "and then try an online backup again."))); + (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE), + errmsg("WAL generated with full_page_writes=off was replayed " + "since last restartpoint"), + errhint("This means that the backup being taken on the standby " + "is corrupt and should not be used. " + "Enable full_page_writes and run CHECKPOINT on the master, " + "and then try an online backup again."))); /* * During recovery, since we don't use the end-of-backup WAL @@ -10477,7 +10477,7 @@ do_pg_start_backup(const char *backupidstr, bool fast, TimeLineID *starttli_p, */ ereport(WARNING, (errcode(ERRCODE_FEATURE_NOT_SUPPORTED), - errmsg("tablespaces are not supported on this platform"))); + errmsg("tablespaces are not supported on this platform"))); #endif } @@ -10493,9 +10493,9 @@ do_pg_start_backup(const char *backupidstr, bool fast, TimeLineID *starttli_p, "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); appendStringInfo(labelfile, "START WAL LOCATION: %X/%X (file %s)\n", - (uint32) (startpoint >> 32), (uint32) startpoint, xlogfilename); + (uint32) (startpoint >> 32), (uint32) startpoint, xlogfilename); appendStringInfo(labelfile, "CHECKPOINT LOCATION: %X/%X\n", - (uint32) (checkpointloc >> 32), (uint32) checkpointloc); + (uint32) (checkpointloc >> 32), (uint32) checkpointloc); appendStringInfo(labelfile, "BACKUP METHOD: %s\n", exclusive ? "pg_start_backup" : "streamed"); appendStringInfo(labelfile, "BACKUP FROM: %s\n", @@ -10562,10 +10562,10 @@ do_pg_start_backup(const char *backupidstr, bool fast, TimeLineID *starttli_p, } else ereport(ERROR, - (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE), - errmsg("a backup is already in progress"), - errhint("If you're sure there is no backup in progress, remove file \"%s\" and try again.", - TABLESPACE_MAP))); + (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE), + errmsg("a backup is already in progress"), + errhint("If you're sure there is no backup in progress, remove file \"%s\" and try again.", + TABLESPACE_MAP))); fp = AllocateFile(TABLESPACE_MAP, "w"); @@ -10727,7 +10727,7 @@ do_pg_stop_backup(char *labelfile, bool waitforarchive, TimeLineID *stoptli_p) if (!backup_started_in_recovery && !XLogIsNeeded()) ereport(ERROR, (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE), - errmsg("WAL level not sufficient for making an online backup"), + errmsg("WAL level not sufficient for making an online backup"), errhint("wal_level must be set to \"replica\" or \"logical\" at server start."))); if (exclusive) @@ -10906,12 +10906,12 @@ do_pg_stop_backup(char *labelfile, bool waitforarchive, TimeLineID *stoptli_p) if (startpoint <= recptr) ereport(ERROR, (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE), - errmsg("WAL generated with full_page_writes=off was replayed " - "during online backup"), - errhint("This means that the backup being taken on the standby " - "is corrupt and should not be used. " - "Enable full_page_writes and run CHECKPOINT on the master, " - "and then try an online backup again."))); + errmsg("WAL generated with full_page_writes=off was replayed " + "during online backup"), + errhint("This means that the backup being taken on the standby " + "is corrupt and should not be used. " + "Enable full_page_writes and run CHECKPOINT on the master, " + "and then try an online backup again."))); LWLockAcquire(ControlFileLock, LW_SHARED); @@ -10960,7 +10960,7 @@ do_pg_stop_backup(char *labelfile, bool waitforarchive, TimeLineID *stoptli_p) errmsg("could not create file \"%s\": %m", histfilepath))); fprintf(fp, "START WAL LOCATION: %X/%X (file %s)\n", - (uint32) (startpoint >> 32), (uint32) startpoint, startxlogfilename); + (uint32) (startpoint >> 32), (uint32) startpoint, startxlogfilename); fprintf(fp, "STOP WAL LOCATION: %X/%X (file %s)\n", (uint32) (stoppoint >> 32), (uint32) stoppoint, stopxlogfilename); /* transfer remaining lines from label to history file */ @@ -11287,7 +11287,7 @@ read_tablespace_map(List **tablespaces) if (sscanf(str, "%s %n", tbsoid, &n) != 1) ereport(FATAL, (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE), - errmsg("invalid data in file \"%s\"", TABLESPACE_MAP))); + errmsg("invalid data in file \"%s\"", TABLESPACE_MAP))); tbslinkpath = str + n; i = 0; @@ -11760,7 +11760,7 @@ WaitForWALToBecomeAvailable(XLogRecPtr RecPtr, bool randAccess, */ now = GetCurrentTimestamp(); if (!TimestampDifferenceExceeds(last_fail_time, now, - wal_retrieve_retry_interval)) + wal_retrieve_retry_interval)) { long secs, wait_time; @@ -11771,7 +11771,7 @@ WaitForWALToBecomeAvailable(XLogRecPtr RecPtr, bool randAccess, (secs * 1000 + usecs / 1000); WaitLatch(&XLogCtl->recoveryWakeupLatch, - WL_LATCH_SET | WL_TIMEOUT | WL_POSTMASTER_DEATH, + WL_LATCH_SET | WL_TIMEOUT | WL_POSTMASTER_DEATH, wait_time, WAIT_EVENT_RECOVERY_WAL_STREAM); ResetLatch(&XLogCtl->recoveryWakeupLatch); now = GetCurrentTimestamp(); @@ -11825,7 +11825,7 @@ WaitForWALToBecomeAvailable(XLogRecPtr RecPtr, bool randAccess, * file from pg_wal. */ readFile = XLogFileReadAnyTLI(readSegNo, DEBUG2, - currentSource == XLOG_FROM_ARCHIVE ? XLOG_FROM_ANY : + currentSource == XLOG_FROM_ARCHIVE ? XLOG_FROM_ANY : currentSource); if (readFile >= 0) return true; /* success! */ |