aboutsummaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/test/isolation/README89
-rw-r--r--src/test/isolation/expected/eval-plan-qual.out51
-rw-r--r--src/test/isolation/isolation_schedule1
-rw-r--r--src/test/isolation/isolationtester.c17
-rw-r--r--src/test/isolation/specs/eval-plan-qual.spec56
5 files changed, 176 insertions, 38 deletions
diff --git a/src/test/isolation/README b/src/test/isolation/README
index aeef7f6c3ab..65cedc84210 100644
--- a/src/test/isolation/README
+++ b/src/test/isolation/README
@@ -3,20 +3,33 @@ src/test/isolation/README
Isolation tests
===============
-This directory contains a set of tests for the serializable isolation level.
-Testing isolation requires running multiple overlapping transactions,
-which requires multiple concurrent connections, and therefore can't be
-tested using the normal pg_regress program.
+This directory contains a set of tests for concurrent behaviors in
+PostgreSQL. These tests require running multiple interacting transactions,
+which requires management of multiple concurrent connections, and therefore
+can't be tested using the normal pg_regress program. The name "isolation"
+comes from the fact that the original motivation was to test the
+serializable isolation level; but tests for other sorts of concurrent
+behaviors have been added as well.
To run the tests, you need to have a server running at the default port
expected by libpq. (You can set PGPORT and so forth in your environment
to control this.) Then run
gmake installcheck
-Note that the prepared-transactions test will not pass unless you have
-the server's max_prepared_transactions parameter set to at least 3.
-
-To represent a test with overlapping transactions, we use a test specification
-file with a custom syntax, which is described in the next section.
+To run just specific test(s), you can do something like
+ ./pg_isolation_regress fk-contention fk-deadlock
+(look into the specs/ subdirectory to see the available tests).
+
+Note that the prepared-transactions test requires the server's
+max_prepared_transactions parameter to be set to at least 3. We have
+provided a variant expected-output file that allows the test to "pass"
+when max_prepared_transactions has its default value of zero, but of
+course that is not really exercising the feature.
+
+To define tests with overlapping transactions, we use test specification
+files with a custom syntax, which is described in the next section. To add
+a new test, place a spec file in the specs/ subdirectory, add the expected
+output in the expected/ subdirectory, and add the test's name to the
+isolation_schedule file.
isolationtester is a program that uses libpq to open multiple connections,
and executes a test specified by a spec file. A libpq connection string
@@ -24,7 +37,8 @@ specifies the server and database to connect to; defaults derived from
environment variables are used otherwise.
pg_isolation_regress is a tool similar to pg_regress, but instead of using
-psql to execute a test, it uses isolationtester.
+psql to execute a test, it uses isolationtester. It accepts all the same
+command-line arguments as pg_regress.
Test specification
@@ -36,48 +50,65 @@ subdirectory. A test specification consists of four parts, in this order:
setup { <SQL> }
The given SQL block is executed once, in one session only, before running
- the test. Create any test tables or such objects here. This part is
- optional.
+ the test. Create any test tables or other required objects here. This
+ part is optional.
teardown { <SQL> }
The teardown SQL block is executed once after the test is finished. Use
- this to clean up, e.g dropping any test tables. This part is optional.
+ this to clean up in preparation for the next permutation, e.g dropping
+ any test tables created by setup. This part is optional.
session "<name>"
- Each session is executed in a separate connection. A session consists
- of four parts: setup, teardown and one or more steps. The per-session
+ There are normally several "session" parts in a spec file. Each
+ session is executed in its own connection. A session part consists
+ of three parts: setup, teardown and one or more "steps". The per-session
setup and teardown parts have the same syntax as the per-test setup and
- teardown described above, but they are executed in every session,
- before and after each permutation. The setup part typically contains a
- "BEGIN" command to begin a transaction.
+ teardown described above, but they are executed in each session. The
+ setup part typically contains a "BEGIN" command to begin a transaction.
- Each step has a syntax of
+ Each step has the syntax
step "<name>" { <SQL> }
- where <name> is a unique name identifying this step, and SQL is a SQL
- statement (or statements, separated by semicolons) that is executed in the
- step.
+ where <name> is a name identifying this step, and SQL is a SQL statement
+ (or statements, separated by semicolons) that is executed in the step.
+ Step names must be unique across the whole spec file.
permutation "<step name>" ...
A permutation line specifies a list of steps that are run in that order.
- If no permutation lines are given, the test program automatically generates
- all possible overlapping orderings of the given sessions.
+ Any number of permutation lines can appear. If no permutation lines are
+ given, the test program automatically generates all possible orderings
+ of the steps from each session (running the steps of any one session in
+ order). Note that the list of steps in a manually specified
+ "permutation" line doesn't actually have to be a permutation of the
+ available steps; it could for instance repeat some steps more than once,
+ or leave others out.
Lines beginning with a # are considered comments.
+For each permutation of the session steps (whether these are manually
+specified in the spec file, or automatically generated), the isolation
+tester runs the main setup part, then per-session setup parts, then
+the selected session steps, then per-session teardown, then the main
+teardown script. Each selected step is sent to the connection associated
+with its session.
+
Support for blocking commands
=============================
-Each spec may contain commands that block until further action has been taken
+Each step may contain commands that block until further action has been taken
(most likely, some other session runs a step that unblocks it or causes a
-deadlock). Such a spec needs to be careful to manually specify valid
+deadlock). A test that uses this ability must manually specify valid
permutations, i.e. those that would not expect a blocked session to execute a
-command. If the spec fails to follow that rule, the spec is aborted.
+command. If the test fails to follow that rule, the test is aborted.
+
+Currently, at most one step can be waiting at a time. As long as one
+step is waiting, subsequent steps are run to completion synchronously.
-Only one command can be waiting at a time. As long as one command is waiting,
-other commands are run to completion synchronously.
+Note that isolationtester recognizes that a command has blocked by looking
+to see if it is shown as waiting in the pg_locks view; therefore, only
+blocks on heavyweight locks will be detected.
diff --git a/src/test/isolation/expected/eval-plan-qual.out b/src/test/isolation/expected/eval-plan-qual.out
new file mode 100644
index 00000000000..ab778cbd7aa
--- /dev/null
+++ b/src/test/isolation/expected/eval-plan-qual.out
@@ -0,0 +1,51 @@
+Parsed test spec with 3 sessions
+
+starting permutation: wx1 wx2 c1 c2 read
+step wx1: UPDATE accounts SET balance = balance - 200 WHERE accountid = 'checking';
+step wx2: UPDATE accounts SET balance = balance + 450 WHERE accountid = 'checking'; <waiting ...>
+step c1: COMMIT;
+step wx2: <... completed>
+step c2: COMMIT;
+step read: SELECT * FROM accounts ORDER BY accountid;
+accountid balance
+
+checking 850
+savings 600
+
+starting permutation: wy1 wy2 c1 c2 read
+step wy1: UPDATE accounts SET balance = balance + 500 WHERE accountid = 'checking';
+step wy2: UPDATE accounts SET balance = balance + 1000 WHERE accountid = 'checking' AND balance < 1000; <waiting ...>
+step c1: COMMIT;
+step wy2: <... completed>
+step c2: COMMIT;
+step read: SELECT * FROM accounts ORDER BY accountid;
+accountid balance
+
+checking 1100
+savings 600
+
+starting permutation: upsert1 upsert2 c1 c2 read
+step upsert1:
+ WITH upsert AS
+ (UPDATE accounts SET balance = balance + 500
+ WHERE accountid = 'savings'
+ RETURNING accountid)
+ INSERT INTO accounts SELECT 'savings', 500
+ WHERE NOT EXISTS (SELECT 1 FROM upsert);
+
+step upsert2:
+ WITH upsert AS
+ (UPDATE accounts SET balance = balance + 1234
+ WHERE accountid = 'savings'
+ RETURNING accountid)
+ INSERT INTO accounts SELECT 'savings', 1234
+ WHERE NOT EXISTS (SELECT 1 FROM upsert);
+ <waiting ...>
+step c1: COMMIT;
+step upsert2: <... completed>
+step c2: COMMIT;
+step read: SELECT * FROM accounts ORDER BY accountid;
+accountid balance
+
+checking 600
+savings 2334
diff --git a/src/test/isolation/isolation_schedule b/src/test/isolation/isolation_schedule
index c3fa8b31bcb..669c0f220c4 100644
--- a/src/test/isolation/isolation_schedule
+++ b/src/test/isolation/isolation_schedule
@@ -13,3 +13,4 @@ test: prepared-transactions
test: fk-contention
test: fk-deadlock
test: fk-deadlock2
+test: eval-plan-qual
diff --git a/src/test/isolation/isolationtester.c b/src/test/isolation/isolationtester.c
index ab1ef036045..0e681639ba1 100644
--- a/src/test/isolation/isolationtester.c
+++ b/src/test/isolation/isolationtester.c
@@ -395,15 +395,9 @@ run_named_permutations(TestSpec * testspec)
Permutation *p = testspec->permutations[i];
Step **steps;
- if (p->nsteps != nallsteps)
- {
- fprintf(stderr, "invalid number of steps in permutation %d\n", i + 1);
- exit_nicely();
- }
-
steps = malloc(p->nsteps * sizeof(Step *));
- /* Find all the named steps from the lookup table */
+ /* Find all the named steps using the lookup table */
for (j = 0; j < p->nsteps; j++)
{
Step **this = (Step **) bsearch(p->stepnames[j], allsteps,
@@ -418,7 +412,9 @@ run_named_permutations(TestSpec * testspec)
steps[j] = *this;
}
+ /* And run them */
run_permutation(testspec, p->nsteps, steps);
+
free(steps);
}
}
@@ -483,6 +479,8 @@ report_two_error_messages(Step *step1, Step *step2)
free(step2->errormsg);
step2->errormsg = NULL;
}
+
+ free(prefix);
}
/*
@@ -700,7 +698,7 @@ try_complete_step(Step *step, int flags)
FD_ZERO(&read_set);
- while (flags & STEP_NONBLOCK && PQisBusy(conn))
+ while ((flags & STEP_NONBLOCK) && PQisBusy(conn))
{
FD_SET(sock, &read_set);
timeout.tv_sec = 0;
@@ -739,7 +737,8 @@ try_complete_step(Step *step, int flags)
}
else if (!PQconsumeInput(conn)) /* select(): data available */
{
- fprintf(stderr, "PQconsumeInput failed: %s", PQerrorMessage(conn));
+ fprintf(stderr, "PQconsumeInput failed: %s\n",
+ PQerrorMessage(conn));
exit_nicely();
}
}
diff --git a/src/test/isolation/specs/eval-plan-qual.spec b/src/test/isolation/specs/eval-plan-qual.spec
new file mode 100644
index 00000000000..786b7913652
--- /dev/null
+++ b/src/test/isolation/specs/eval-plan-qual.spec
@@ -0,0 +1,56 @@
+# Tests for the EvalPlanQual mechanism
+#
+# EvalPlanQual is used in READ COMMITTED isolation level to attempt to
+# re-execute UPDATE and DELETE operations against rows that were updated
+# by some concurrent transaction.
+
+setup
+{
+ CREATE TABLE accounts (accountid text PRIMARY KEY, balance numeric not null);
+ INSERT INTO accounts VALUES ('checking', 600), ('savings', 600);
+}
+
+teardown
+{
+ DROP TABLE accounts;
+}
+
+session "s1"
+setup { BEGIN ISOLATION LEVEL READ COMMITTED; }
+# wx1 then wx2 checks the basic case of re-fetching up-to-date values
+step "wx1" { UPDATE accounts SET balance = balance - 200 WHERE accountid = 'checking'; }
+# wy1 then wy2 checks the case where quals pass then fail
+step "wy1" { UPDATE accounts SET balance = balance + 500 WHERE accountid = 'checking'; }
+# upsert tests are to check writable-CTE cases
+step "upsert1" {
+ WITH upsert AS
+ (UPDATE accounts SET balance = balance + 500
+ WHERE accountid = 'savings'
+ RETURNING accountid)
+ INSERT INTO accounts SELECT 'savings', 500
+ WHERE NOT EXISTS (SELECT 1 FROM upsert);
+}
+step "c1" { COMMIT; }
+
+session "s2"
+setup { BEGIN ISOLATION LEVEL READ COMMITTED; }
+step "wx2" { UPDATE accounts SET balance = balance + 450 WHERE accountid = 'checking'; }
+step "wy2" { UPDATE accounts SET balance = balance + 1000 WHERE accountid = 'checking' AND balance < 1000; }
+step "upsert2" {
+ WITH upsert AS
+ (UPDATE accounts SET balance = balance + 1234
+ WHERE accountid = 'savings'
+ RETURNING accountid)
+ INSERT INTO accounts SELECT 'savings', 1234
+ WHERE NOT EXISTS (SELECT 1 FROM upsert);
+}
+step "c2" { COMMIT; }
+
+session "s3"
+setup { BEGIN ISOLATION LEVEL READ COMMITTED; }
+step "read" { SELECT * FROM accounts ORDER BY accountid; }
+teardown { COMMIT; }
+
+permutation "wx1" "wx2" "c1" "c2" "read"
+permutation "wy1" "wy2" "c1" "c2" "read"
+permutation "upsert1" "upsert2" "c1" "c2" "read"
generated by cgit v1.2.3 (git 2.25.1) at 2025-05-24 19:36:10 +0000