| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit cbc127917e introduced tracking of unpruned relids to avoid
processing pruned relations, and changed ExecInitModifyTable() to
initialize only unpruned result relations. As a result, MERGE
statements that prune all target partitions can now lead to crashes
or incorrect behavior during execution.
The crash occurs because some executor code paths rely on
ModifyTableState.resultRelInfo[0] being present and initialized,
even when no result relations remain after pruning. For example,
ExecMerge() and ExecMergeNotMatched() use the first resultRelInfo
to determine the appropriate action. Similarly,
ExecInitPartitionInfo() assumes that at least one result relation
exists.
To preserve these assumptions, ExecInitModifyTable() now includes the
first result relation in the initialized result relation list if all
result relations for that ModifyTable were pruned. To enable that,
ExecDoInitialPruning() ensures the first relation is locked if it was
pruned and locking is necessary.
To support this exception to the pruning logic, PlannedStmt now
includes a list of RT indexes identifying the first result relation
of each ModifyTable node in the plan. This allows
ExecDoInitialPruning() to check whether each such relation was
pruned and, if so, lock it if necessary.
Bug: #18830
Reported-by: Robins Tharakan <tharakan@gmail.com>
Diagnozed-by: Tender Wang <tndrwang@gmail.com>
Diagnozed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Co-authored-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/18830-1f31ea1dc930d444%40postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit introduces changes to track unpruned relations explicitly,
making it possible for top-level plan nodes, such as ModifyTable and
LockRows, to avoid processing partitions pruned during initial
pruning. Scan-level nodes, such as Append and MergeAppend, already
avoid the unnecessary processing by accessing partition pruning
results directly via part_prune_index. In contrast, top-level nodes
cannot access pruning results directly and need to determine which
partitions remain unpruned.
To address this, this commit introduces a new bitmapset field,
es_unpruned_relids, which the executor uses to track the set of
unpruned relations. This field is referenced during plan
initialization to skip initializing certain nodes for pruned
partitions. It is initialized with PlannedStmt.unprunableRelids,
a new field that the planner populates with RT indexes of relations
that cannot be pruned during runtime pruning. These include relations
not subject to partition pruning and those required for execution
regardless of pruning.
PlannedStmt.unprunableRelids is computed during set_plan_refs() by
removing the RT indexes of runtime-prunable relations, identified
from PartitionPruneInfos, from the full set of relation RT indexes.
ExecDoInitialPruning() then updates es_unpruned_relids by adding
partitions that survive initial pruning.
To support this, PartitionedRelPruneInfo and PartitionedRelPruningData
now include a leafpart_rti_map[] array that maps partition indexes to
their corresponding RT indexes. The former is used in set_plan_refs()
when constructing unprunableRelids, while the latter is used in
ExecDoInitialPruning() to convert partition indexes returned by
get_matching_partitions() into RT indexes, which are then added to
es_unpruned_relids.
These changes make it possible for ModifyTable and LockRows nodes to
process only relations that remain unpruned after initial pruning.
ExecInitModifyTable() trims lists, such as resultRelations,
withCheckOptionLists, returningLists, and updateColnosLists, to
consider only unpruned partitions. It also creates ResultRelInfo
structs only for these partitions. Similarly, child RowMarks for
pruned relations are skipped.
By avoiding unnecessary initialization of structures for pruned
partitions, these changes improve the performance of updates and
deletes on partitioned tables during initial runtime pruning.
Due to ExecInitModifyTable() changes as described above, EXPLAIN on a
plan for UPDATE and DELETE that uses runtime initial pruning no longer
lists partitions pruned during initial pruning.
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit builds on the prior change that moved PartitionPruneInfos
out of individual plan nodes into a list in PlannedStmt, making it
possible to initialize PartitionPruneStates without traversing the
plan tree and perform runtime initial pruning before ExecInitNode()
initializes the plan trees. These tasks are now handled in a new
routine, ExecDoInitialPruning(), which is called by InitPlan()
before calling ExecInitNode() on various plan trees.
ExecDoInitialPruning() performs the initial pruning and saves the
result -- a Bitmapset of indexes for surviving child subnodes -- in
es_part_prune_results, a list in EState.
PartitionPruneStates created for initial pruning are stored in
es_part_prune_states, another list in EState, for later use during
exec pruning. Both lists are parallel to es_part_prune_infos, which
holds the PartitionPruneInfos from PlannedStmt, enabling shared
indexing.
PartitionPruneStates initialized in ExecDoInitialPruning() now
include only the PartitionPruneContexts for initial pruning steps.
Exec pruning contexts are initialized later in
ExecInitPartitionExecPruning() when the parent plan node is
initialized, as the exec pruning step expressions depend on the parent
node's PlanState.
The existing function PartitionPruneFixSubPlanMap() has been
repurposed for this initialization to avoid duplicating a similar
loop structure for finding PartitionedRelPruningData to initialize
exec pruning contexts for. It has been renamed to
InitExecPruningContexts() to reflect its new primary responsibility.
The original logic to "fix subplan maps" remains intact but is now
encapsulated within the renamed function.
This commit removes two obsolete Asserts in partkey_datum_from_expr().
The ExprContext used for pruning expression evaluation is now
independent of the parent PlanState, making these Asserts unnecessary.
By centralizing pruning logic and decoupling it from the plan
initialization step (ExecInitNode()), this change sets the stage for
future patches that will use the result of initial pruning to
save the overhead of redundant processing for pruned partitions.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This moves PartitionPruneInfo from plan nodes to PlannedStmt,
simplifying traversal by centralizing all PartitionPruneInfo
structures in a single list in it, which holds all instances for the
main query and its subqueries. Instead of plan nodes (Append or
MergeAppend) storing PartitionPruneInfo pointers, they now reference
an index in this list.
A bitmapset field is added to PartitionPruneInfo to store the RT
indexes corresponding to the apprelids field in Append or MergeAppend.
This allows execution pruning logic to verify that it operates on the
correct plan node, mainly to facilitate debugging.
Duplicated code in set_append_references() and
set_mergeappend_references() is refactored into a new function,
register_pruneinfo(). This updates RT indexes by applying rtoffet
and adds PartitionPruneInfo to the global list in PlannerGlobal.
By allowing pruning to be performed without traversing the plan tree,
this change lays the groundwork for runtime initial pruning to occur
independently of plan tree initialization.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org> (earlier version)
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
|
| |
|
|
| |
Backpatch-through: 13
|
| |
|
|
|
|
|
|
| |
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit ec386948948c and its fixup 589bb816499e.
This change was intended to support query planning avoiding acquisition
of locks on partitions that were going to be pruned; however, the
overall project took a different direction at [1] and this bit is no
longer needed. Put things back the way they were as agreed in [2], to
avoid unnecessary complexity.
Discussion: [1] https://postgr.es/m/4191508.1674157166@sss.pgh.pa.us
Discussion: [2] https://postgr.es/m/20230502175409.kcoirxczpdha26wt@alvherre.pgsql
|
| |
|
|
| |
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The planner will now add a given PartitioPruneInfo to
PlannedStmt.partPruneInfos instead of directly to the
Append/MergeAppend plan node. What gets set instead in the
latter is an index field which points to the list element
of PlannedStmt.partPruneInfos containing the PartitioPruneInfo
belonging to the plan node.
A later commit will make AcquireExecutorLocks() do the initial
partition pruning to determine a minimal set of partitions to be
locked when validating a plan tree and it will need to consult the
PartitioPruneInfos referenced therein to do so. It would be better
for the PartitioPruneInfos to be accessible directly than requiring
a walk of the plan tree to find them, which is easier when it can be
done by simply iterating over PlannedStmt.partPruneInfos.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
|
| |
|
|
|
|
|
| |
This reverts commit 99392cdd78b788295e52b9f4942fa11992fd5ba9.
We'd rather rewrite ri_triggers.c as a whole rather than piecemeal.
Discussion: https://postgr.es/m/E1ncXX2-000mFt-Pe@gemulon.postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Modify the subroutines called by RI trigger functions that want to check
if a given referenced value exists in the referenced relation to simply
scan the foreign key constraint's unique index, instead of using SPI to
execute
SELECT 1 FROM referenced_relation WHERE ref_key = $1
This saves a lot of work, especially when inserting into or updating a
referencing relation.
This rewrite allows to fix a PK row visibility bug caused by a partition
descriptor hack which requires ActiveSnapshot to be set to come up with
the correct set of partitions for the RI query running under REPEATABLE
READ isolation. We now set that snapshot indepedently of the snapshot
to be used by the PK index scan, so the two no longer interfere. The
buggy output in src/test/isolation/expected/fk-snapshot.out of the
relevant test case added by commit 00cb86e75d6d has been corrected.
(The bug still exists in branch 14, however, but this fix is too
invasive to backpatch.)
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Li Japin <japinli@hotmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CA+HiwqGkfJfYdeq5vHPh6eqPKjSbfpDDY+j-kXYFePQedtSLeg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Move the execution pruning initialization steps that are common
between both ExecInitAppend() and ExecInitMergeAppend() into a new
function ExecInitPartitionPruning() defined in execPartition.c.
Those steps include creation of a PartitionPruneState to be used for
all instances of pruning and determining the minimal set of child
subplans that need to be initialized by performing initial pruning if
needed, and finally adjusting the subplan_map arrays in the
PartitionPruneState to reflect the new set of subplans remaining
after initial pruning if it was indeed performed.
ExecCreatePartitionPruneState() is no longer exported out of
execPartition.c and has been renamed to CreatePartitionPruneState()
as a local sub-routine of ExecInitPartitionPruning().
* Likewise, ExecFindInitialMatchingSubPlans() that was in charge of
performing initial pruning no longer needs to be exported. In fact,
since it would now have the same body as the more generally named
ExecFindMatchingSubPlans(), except differing in the value of
initial_prune passed to the common subroutine
find_matching_subplans_recurse(), it seems better to remove it and add
an initial_prune argument to ExecFindMatchingSubPlans().
* Add an ExprContext field to PartitionPruneContext to remove the
implicit assumption in the runtime pruning code that the ExprContext to
use to compute pruning expressions that need one can always rely on the
PlanState providing it. A future patch will allow runtime pruning (at
least the initial pruning steps) to be performed without the
corresponding PlanState yet having been created, so this will help.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqEYCpEqh2LMDOp9mT+4-QoVe8HgFMKBjntEMCTZLpcCCA@mail.gmail.com
|
| |
|
|
| |
Backpatch-through: 10
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Arrange to do some things on-demand, rather than immediately during
executor startup, because there's a fair chance of never having to do
them at all:
* Don't open result relations' indexes until needed.
* Don't initialize partition tuple routing, nor the child-to-root
tuple conversion map, until needed.
This wins in UPDATEs on partitioned tables when only some of the
partitions will actually receive updates; with larger partition
counts the savings is quite noticeable. Also, we can remove some
sketchy heuristics in ExecInitModifyTable about whether to set up
tuple routing.
Also, remove execPartition.c's private hash table tracking which
partitions were already opened by the ModifyTable node. Instead
use the hash added to ModifyTable itself by commit 86dc90056.
To allow lazy computation of the conversion maps, we now set
ri_RootResultRelInfo in all child ResultRelInfos. We formerly set it
only in some, not terribly well-defined, cases. This has user-visible
side effects in that now more error messages refer to the root
relation instead of some partition (and provide error data in the
root's column order, too). It looks to me like this is a strict
improvement in consistency, so I don't have a problem with the
output changes visible in this commit.
Extracted from a larger patch, which seemed to me to be too messy
to push in one commit.
Amit Langote, reviewed at different times by Heikki Linnakangas and
myself
Discussion: https://postgr.es/m/CA+HiwqG7ZruBmmih3wPsBZ4s0H2EhywrnXEduckY5Hr3fWzPWA@mail.gmail.com
|
| |
|
|
| |
Backpatch-through: 9.5
|
| |
|
|
|
|
|
|
|
|
| |
The extra indirection neeeded to access its members via its enclosing
ResultRelInfo seems pointless. Move all the fields from
PartitionRoutingInfo to ResultRelInfo.
Author: Amit Langote
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqFViT47Zbr_ASBejiK7iDG8%3DQ1swQ-tjM6caRPQ67pT%3Dw%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Store the tuple conversion map to convert a tuple from a child table's
format to the root format in a new ri_ChildToRootMap field in
ResultRelInfo. It is initialized if transition tuple capture for FOR
STATEMENT triggers or INSERT tuple routing on a partitioned table is
needed. Previously, ModifyTable kept the maps in the per-subplan
ModifyTableState->mt_per_subplan_tupconv_maps array, or when tuple
routing was used, in
ResultRelInfo->ri_Partitioninfo->pi_PartitionToRootMap. The new field
replaces both of those.
Now that the child-to-root tuple conversion map is always available in
ResultRelInfo (when needed), remove the TransitionCaptureState.tcs_map
field. The callers of Exec*Trigger() functions no longer need to set or
save it, which is much less confusing and bug-prone. Also, as a future
optimization, this will allow us to delay creating the map for a given
result relation until the relation is actually processed during
execution.
Author: Amit Langote
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqHtCWLdK-LO%3DNEsvOdHx%2B7yv4mE_zYK0i3BH7dXb-wxog%40mail.gmail.com
|
| |
|
|
| |
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
| |
|
|
|
|
|
|
|
| |
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, gen_partprune_steps() always built executor pruning steps
using all suitable clauses, including those containing PARAM_EXEC
Params. This meant that the pruning steps were only completely safe
for executor run-time (scan start) pruning. To prune at executor
startup, we had to ignore the steps involving exec Params. But this
doesn't really work in general, since there may be logic changes
needed as well --- for example, pruning according to the last operator's
btree strategy is the wrong thing if we're not applying that operator.
The rules embodied in gen_partprune_steps() and its minions are
sufficiently complicated that tracking their incremental effects in
other logic seems quite impractical.
Short of a complete redesign, the only safe fix seems to be to run
gen_partprune_steps() twice, once to create executor startup pruning
steps and then again for run-time pruning steps. We can save a few
cycles however by noting during the first scan whether we rejected
any clauses because they involved exec Params --- if not, we don't
need to do the second scan.
In support of this, refactor the internal APIs in partprune.c to make
more use of passing information in the GeneratePruningStepsContext
struct, rather than as separate arguments.
This is, I hope, the last piece of our response to a bug report from
Alan Jackson. Back-patch to v11 where this code came in.
Discussion: https://postgr.es/m/FAD28A83-AC73-489E-A058-2681FA31D648@tvsquared.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We still require AccessExclusiveLock on the partition itself, because
otherwise an insert that violates the newly-imposed partition
constraint could be in progress at the same time that we're changing
that constraint; only the lock level on the parent relation is
weakened.
To make this safe, we have to cope with (at least) three separate
problems. First, relevant DDL might commit while we're in the process
of building a PartitionDesc. If so, find_inheritance_children() might
see a new partition while the RELOID system cache still has the old
partition bound cached, and even before invalidation messages have
been queued. To fix that, if we see that the pg_class tuple seems to
be missing or to have a null relpartbound, refetch the value directly
from the table. We can't get the wrong value, because DETACH PARTITION
still requires AccessExclusiveLock throughout; if we ever want to
change that, this will need more thought. In testing, I found it quite
difficult to hit even the null-relpartbound case; the race condition
is extremely tight, but the theoretical risk is there.
Second, successive calls to RelationGetPartitionDesc might not return
the same answer. The query planner will get confused if lookup up the
PartitionDesc for a particular relation does not return a consistent
answer for the entire duration of query planning. Likewise, query
execution will get confused if the same relation seems to have a
different PartitionDesc at different times. Invent a new
PartitionDirectory concept and use it to ensure consistency. This
ensures that a single invocation of either the planner or the executor
sees the same view of the PartitionDesc from beginning to end, but it
does not guarantee that the planner and the executor see the same
view. Since this allows pointers to old PartitionDesc entries to
survive even after a relcache rebuild, also postpone removing the old
PartitionDesc entry until we're certain no one is using it.
For the most part, it seems to be OK for the planner and executor to
have different views of the PartitionDesc, because the executor will
just ignore any concurrently added partitions which were unknown at
plan time; those partitions won't be part of the inheritance
expansion, but invalidation messages will trigger replanning at some
point. Normally, this happens by the time the very next command is
executed, but if the next command acquires no locks and executes a
prepared query, it can manage not to notice until a new transaction is
started. We might want to tighten that up, but it's material for a
separate patch. There would still be a small window where a query
that started just after an ATTACH PARTITION command committed might
fail to notice its results -- but only if the command starts before
the commit has been acknowledged to the user. All in all, the warts
here around serializability seem small enough to be worth accepting
for the considerable advantage of being able to add partitions without
a full table lock.
Although in general the consequences of new partitions showing up
between planning and execution are limited to the query not noticing
the new partitions, run-time partition pruning will get confused in
that case, so that's the third problem that this patch fixes.
Run-time partition pruning assumes that indexes into the PartitionDesc
are stable between planning and execution. So, add code so that if
new partitions are added between plan time and execution time, the
indexes stored in the subplan_map[] and subpart_map[] arrays within
the plan's PartitionedRelPruneInfo get adjusted accordingly. There
does not seem to be a simple way to generalize this scheme to cope
with partitions that are removed, mostly because they could then get
added back again with different bounds, but it works OK for added
partitions.
This code does not try to ensure that every backend participating in
a parallel query sees the same view of the PartitionDesc. That
currently doesn't matter, because we never pass PartitionDesc
indexes between backends. Each backend will ignore the concurrently
added partitions which it notices, and it doesn't matter if different
backends are ignoring different sets of concurrently added partitions.
If in the future that matters, for example because we allow writes in
parallel query and want all participants to do tuple routing to the same
set of partitions, the PartitionDirectory concept could be improved to
share PartitionDescs across backends. There is a draft patch to
serialize and restore PartitionDescs on the thread where this patch
was discussed, which may be a useful place to start.
Patch by me. Thanks to Alvaro Herrera, David Rowley, Simon Riggs,
Amit Langote, and Michael Paquier for discussion, and to Alvaro
Herrera for some review.
Discussion: http://postgr.es/m/CA+Tgmobt2upbSocvvDej3yzokd7AkiT+PvgFH+a9-5VV1oJNSQ@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoZE0r9-cyA-aY6f8WFEROaDLLL7Vf81kZ8MtFCkxpeQSw@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoY13KQZF-=HNTrt9UYWYx3_oYOQpu9ioNT49jGgiDpUEA@mail.gmail.com
|
| |
|
|
| |
Backpatch-through: certain files through 9.4
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This speeds up write operations (INSERT, UPDATE, DELETE, COPY, as well
as the future MERGE) on partitioned tables.
This changes the setup for tuple routing so that it does far less work
during the initial setup and pushes more work out to when partitions
receive tuples. PartitionDispatchData structs for sub-partitioned
tables are only created when a tuple gets routed through it. The
possibly large arrays in the PartitionTupleRouting struct have largely
been removed. The partitions[] array remains but now never contains any
NULL gaps. Previously the NULLs had to be skipped during
ExecCleanupTupleRouting(), which could add a large overhead to the
cleanup when the number of partitions was large. The partitions[] array
is allocated small to start with and only enlarged when we route tuples
to enough partitions that it runs out of space. This allows us to keep
simple single-row partition INSERTs running quickly. Redesign
The arrays in PartitionTupleRouting which stored the tuple translation maps
have now been removed. These have been moved out into a
PartitionRoutingInfo struct which is an additional field in ResultRelInfo.
The find_all_inheritors() call still remains by far the slowest part of
ExecSetupPartitionTupleRouting(). This commit just removes the other slow
parts.
In passing also rename the tuple translation maps from being ParentToChild
and ChildToParent to being RootToPartition and PartitionToRoot. The old
names mislead you into thinking that a partition of some sub-partitioned
table would translate to the rowtype of the sub-partitioned table rather
than the root partitioned table.
Authors: David Rowley and Amit Langote, heavily revised by Álvaro Herrera
Testing help from Jesper Pedersen and Kato Sho.
Discussion: https://postgr.es/m/CAKJS1f_1RJyFquuCKRFHTdcXqoPX-PYqAd7nz=GVBwvGh4a6xA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Create an array estate->es_relations[] paralleling the es_range_table,
and store references to Relations (relcache entries) there, so that any
given RT entry is opened and closed just once per executor run. Scan
nodes typically still call ExecOpenScanRelation, but ExecCloseScanRelation
is no more; relation closing is now done centrally in ExecEndPlan.
This is slightly more complex than one would expect because of the
interactions with relcache references held in ResultRelInfo nodes.
The general convention is now that ResultRelInfo->ri_RelationDesc does
not represent a separate relcache reference and so does not need to be
explicitly closed; but there is an exception for ResultRelInfos in the
es_trig_target_relations list, which are manufactured by
ExecGetTriggerResultRel and have to be cleaned up by
ExecCleanUpTriggerState. (That much was true all along, but these
ResultRelInfos are now more different from others than they used to be.)
To allow the partition pruning logic to make use of es_relations[] rather
than having its own relcache references, adjust PartitionedRelPruneInfo
to store an RT index rather than a relation OID.
Amit Langote, reviewed by David Rowley and Jesper Pedersen,
some mods by me
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's inefficient to use a single slot for mapping between tuple
descriptors for multiple tuples, as previously done when using
ConvertPartitionTupleSlot(), as that means the slot's tuple descriptors
change for every tuple.
Previously we also, via ConvertPartitionTupleSlot(), built new tuples
after the mapping even in cases where we, immediately afterwards,
access individual columns again.
Refactor the code so one slot, on demand, is used for each
partition. That avoids having to change the descriptor (and allows to
use the more efficient "fixed" tuple slots). Then use slot->slot
mapping, to avoid unnecessarily forming a tuple.
As the naming between the tuple and slot mapping functions wasn't
consistent, rename them to execute_attr_map_{tuple,slot}. It's likely
that we'll also rename convert_tuples_by_* to denote that these
functions "only" build a map, but that's left for later.
Author: Amit Khandekar and Amit Langote, editorialized by me
Reviewed-By: Amit Langote, Amit Khandekar, Andres Freund
Discussion:
https://postgr.es/m/CAJ3gD9fR0wRNeAE8VqffNTyONS_UfFPRpqxhnD9Q42vZB+Jvpg@mail.gmail.com
https://postgr.es/m/e4f9d743-cd4b-efb0-7574-da21d86a7f36%40lab.ntt.co.jp
Backpatch: -
|
| |
|
|
|
|
|
| |
There's no reason to expose the struct definition, so don't.
Author: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Discussion: https://postgr.es/m/d3fa24c1-bc65-7133-81df-6474387ccc4f@lab.ntt.co.jp
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous coding here supposed that if run-time partitioning applied to
a particular Append/MergeAppend plan, then all child plans of that node
must be members of a single partitioning hierarchy. This is totally wrong,
since an Append could be formed from a UNION ALL: we could have multiple
hierarchies sharing the same Append, or child plans that aren't part of any
hierarchy.
To fix, restructure the related plan-time and execution-time data
structures so that we can have a separate list or array for each
partitioning hierarchy. Also track subplans that are not part of any
hierarchy, and make sure they don't get pruned.
Per reports from Phil Florent and others. Back-patch to v11, since
the bug originated there.
David Rowley, with a lot of cosmetic adjustments by me; thanks also
to Amit Langote for review.
Discussion: https://postgr.es/m/HE1PR03MB17068BB27404C90B5B788BCABA7B0@HE1PR03MB1706.eurprd03.prod.outlook.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CopyFrom allows multi-inserts to be used for non-partitioned tables, but
this was disabled for partitioned tables. The reason for this appeared
to be that the tuple may not belong to the same partition as the
previous tuple did. Not allowing multi-inserts here greatly slowed down
imports into partitioned tables. These could take twice as long as a
copy to an equivalent non-partitioned table. It seems wise to do
something about this, so this change allows the multi-inserts by
flushing the so-far inserted tuples to the partition when the next tuple
does not belong to the same partition, or when the buffer fills. This
improves performance when the next tuple in the stream commonly belongs
to the same partition as the previous tuple.
In cases where the target partition changes on every tuple, using
multi-inserts slightly slows the performance. To get around this we
track the average size of the batches that have been inserted and
adaptively enable or disable multi-inserts based on the size of the
batch. Some testing was done and the regression only seems to exist
when the average size of the insert batch is close to 1, so let's just
enable multi-inserts when the average size is at least 1.3. More
performance testing might reveal a better number for, this, but since
the slowdown was only 1-2% it does not seem critical enough to spend too
much time calculating it. In any case it may depend on other factors
rather than just the size of the batch.
Allowing multi-inserts for partitions required a bit of work around the
per-tuple memory contexts as we must flush the tuples when the next
tuple does not belong the same partition. In which case there is no
good time to reset the per-tuple context, as we've already built the new
tuple by this time. In order to work around this we maintain two
per-tuple contexts and just switch between them every time the partition
changes and reset the old one. This does mean that the first of each
batch of tuples is not allocated in the same memory context as the
others, but that does not matter since we only reset the context once
the previous batch has been inserted.
Author: David Rowley <david.rowley@2ndquadrant.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous coding saved pointers into the partitioned table's relcache
entry, but then closed the relcache entry, causing those pointers to
nominally become dangling. Actual trouble would be seen in the field
only if a relcache flush occurred mid-query, but that's hardly out of
the question.
While we could fix this by copying all the data in question at query
start, it seems better to just hold the relcache entry open for the
whole query.
While at it, improve the handling of support-function lookups: do that
once per query not once per pruning test. There's still something to be
desired here, in that we fail to exploit the possibility of caching data
across queries in the fn_extra fields of the relcache's FmgrInfo structs,
which could happen if we just used those structs in-place rather than
copying them. However, combining that with the possibility of per-query
lookups of cross-type comparison functions seems to require changes in the
APIs of a lot of the pruning support functions, so it's too invasive to
consider as part of this patch. A win would ensue only for complex
partition key data types (e.g. arrays), so it may not be worth the
trouble.
David Rowley and Tom Lane
Discussion: https://postgr.es/m/17850.1528755844@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
| |
No code changes except for a couple of new Asserts.
David Rowley and Tom Lane
Discussion: https://postgr.es/m/CAKJS1f-6GODRNgEtdPxCnAPme2h2hTztB6LmtfdmcYAAOE0kQg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
| |
Use "subplan" rather than "subnode" to refer to the child plans of
a partitioning Append; this seems a bit more specific and hence
clearer. Improve assorted comments. No non-cosmetic changes.
David Rowley and Tom Lane
Discussion: https://postgr.es/m/CAFj8pRBjrufA3ocDm8o4LPGNye9Y+pm1b9kCwode4X04CULG3g@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The initial coding of the run-time-pruning feature only coped with cases
where the partition key(s) are compared to Params. That is a bit silly;
we can allow it to work with any non-Var-containing stable expression, as
long as we take special care with expressions containing PARAM_EXEC Params.
The code is hardly any longer this way, and it's considerably clearer
(IMO at least). Per gripe from Pavel Stehule.
David Rowley, whacked around a bit by me
Discussion: https://postgr.es/m/CAFj8pRBjrufA3ocDm8o4LPGNye9Y+pm1b9kCwode4X04CULG3g@mail.gmail.com
|
| |
|
|
|
|
| |
Reported-by: Amit Langote
Discussion: https://postgr.es/m/d2e6674c-c5c6-fe89-1d0b-3534b9db0476@lab.ntt.co.jp
|
| |
|
|
| |
Discussion: https://postgr.es/m/15719.1523984266@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There's been a massive addition of partitioning code in PostgreSQL 11,
with little oversight on its placement, resulting in a
catalog/partition.c with poorly defined boundaries and responsibilities.
This commit tries to set a couple of distinct modules to separate things
a little bit. There are no code changes here, only code movement.
There are three new files:
src/backend/utils/cache/partcache.c
src/include/partitioning/partdefs.h
src/include/utils/partcache.h
The previous arrangement of #including catalog/partition.h almost
everywhere is no more.
Authors: Amit Langote and Álvaro Herrera
Discussion: https://postgr.es/m/98e8d509-790a-128c-be7f-e48a5b2d8d97@lab.ntt.co.jp
https://postgr.es/m/11aa0c50-316b-18bb-722d-c23814f39059@lab.ntt.co.jp
https://postgr.es/m/143ed9a4-6038-76d4-9a55-502035815e68@lab.ntt.co.jp
https://postgr.es/m/20180413193503.nynq7bnmgh6vs5vm@alvherre.pgsql
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commits d204ef63776b8a00ca220adec23979091564e465,
83454e3c2b28141c0db01c7d2027e01040df5249 and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Existing partition pruning is only able to work at plan time, for query
quals that appear in the parsed query. This is good but limiting, as
there can be parameters that appear later that can be usefully used to
further prune partitions.
This commit adds support for pruning subnodes of Append which cannot
possibly contain any matching tuples, during execution, by evaluating
Params to determine the minimum set of subnodes that can possibly match.
We support more than just simple Params in WHERE clauses. Support
additionally includes:
1. Parameterized Nested Loop Joins: The parameter from the outer side of the
join can be used to determine the minimum set of inner side partitions to
scan.
2. Initplans: Once an initplan has been executed we can then determine which
partitions match the value from the initplan.
Partition pruning is performed in two ways. When Params external to the plan
are found to match the partition key we attempt to prune away unneeded Append
subplans during the initialization of the executor. This allows us to bypass
the initialization of non-matching subplans meaning they won't appear in the
EXPLAIN or EXPLAIN ANALYZE output.
For parameters whose value is only known during the actual execution
then the pruning of these subplans must wait. Subplans which are
eliminated during this stage of pruning are still visible in the EXPLAIN
output. In order to determine if pruning has actually taken place, the
EXPLAIN ANALYZE must be viewed. If a certain Append subplan was never
executed due to the elimination of the partition then the execution
timing area will state "(never executed)". Whereas, if, for example in
the case of parameterized nested loops, the number of loops stated in
the EXPLAIN ANALYZE output for certain subplans may appear lower than
others due to the subplan having been scanned fewer times. This is due
to the list of matching subnodes having to be evaluated whenever a
parameter which was found to match the partition key changes.
This commit required some additional infrastructure that permits the
building of a data structure which is able to perform the translation of
the matching partition IDs, as returned by get_matching_partitions, into
the list index of a subpaths list, as exist in node types such as
Append, MergeAppend and ModifyTable. This allows us to translate a list
of clauses into a Bitmapset of all the subpath indexes which must be
included to satisfy the clause list.
Author: David Rowley, based on an earlier effort by Beena Emerson
Reviewers: Amit Langote, Robert Haas, Amul Sul, Rajkumar Raghuwanshi,
Jesper Pedersen
Discussion: https://postgr.es/m/CAOG9ApE16ac-_VVZVvv0gePSgkg_BwYEV1NBqZFqDR2bBE0X0A@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
| |
Also enable this for postgres_fdw.
Etsuro Fujita, based on an earlier patch by Amit Langote. The larger
patch series of which this is a part has been reviewed by Amit
Langote, David Fetter, Maksim Milyutin, Álvaro Herrera, Stephen Frost,
and me. Minor documentation changes to the final version by me.
Discussion: http://postgr.es/m/29906a26-da12-8c86-4fb9-d8f88442f2b9@lab.ntt.co.jp
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
|
| |
|
|
| |
This reverts commit 354f13855e6381d288dfaa52bcd4f2cb0fd4a5eb.
|
| | |
|
| |
|
|
|
|
|
| |
Small review on edd44738bc88.
Discussion: https://postgr.es/m/20180222165315.k27qfn4goskhoswj@alvherre.pgsql
Reviewed-by: Robert Haas, Amit Langote
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's not necessary to fully initialize the executor data structures
for partitions to which no tuples are ever routed. Consider, for
example, an INSERT statement that inserts only one row: it only cares
about the partition to which that one row is routed. The new function
ExecInitPartitionInfo performs the initialization in question only
when a particular partition is about to receive a tuple. This includes
creating, validating, and saving a pointer to the ResultRelInfo,
setting up for speculative insertions, translating WCOs and
initializing the resulting expressions, translating returning lists
and building the appropriate projection information, and setting up a
tuple conversion map.
One thing that's not deferred is locking the child partitions; that
seems desirable but would need more thought. Still, testing shows
that this makes single-row inserts significantly faster on a table
with many partitions without harming the bulk-insert case.
Amit Langote, reviewed by Etsuro Fujita, with a few changes by me
Discussion: http://postgr.es/m/8975331d-d961-cbdd-f862-fdd3d97dc2d0@lab.ntt.co.jp
|
| |
|
|
|
|
|
| |
Report by buildfarm member skink and Tom Lane. Analysis by me.
Patch by Amit Khandekar.
Discussion: http://postgr.es/m/CAJ3gD9fVA1iXQYhfqHP5n_TEd4U9=V8TL_cc-oKRnRmxgdvJrQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When an UPDATE causes a row to no longer match the partition
constraint, try to move it to a different partition where it does
match the partition constraint. In essence, the UPDATE is split into
a DELETE from the old partition and an INSERT into the new one. This
can lead to surprising behavior in concurrency scenarios because
EvalPlanQual rechecks won't work as they normally did; the known
problems are documented. (There is a pending patch to improve the
situation further, but it needs more review.)
Amit Khandekar, reviewed and tested by Amit Langote, David Rowley,
Rajkumar Raghuwanshi, Dilip Kumar, Amul Sul, Thomas Munro, Álvaro
Herrera, Amit Kapila, and me. A few final revisions by me.
Discussion: http://postgr.es/m/CAJ3gD9do9o2ccQ7j7+tSgiE1REY65XRiMb=yJO3u3QhyP8EEPQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Instead of having ExecSetupPartitionTupleRouting return multiple out
parameters, have it return a pointer to a structure containing all of
those different things. Also, provide and use a cleanup function,
ExecCleanupTupleRouting, instead of cleaning up all of the resources
allocated by ExecSetupPartitionTupleRouting individually.
Amit Khandekar, reviewed by Amit Langote, David Rowley, and me
Discussion: http://postgr.es/m/CAJ3gD9fWfxgKC+PfJZF3hkgAcNOy-LpfPxVYitDEXKHjeieWQQ@mail.gmail.com
|
| |
|
|
| |
Backpatch-through: certain files through 9.3
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Commit 8355a011a0124bdf7ccbada206a967d427039553 was reverted in
f05230752d53c4aa74cffa9b699983bbb6bcb118, but this attempt is
hopefully better-considered: we now pass the correct value to
ExecOpenIndices, which should avoid the crash that we hit before.
Amit Langote, reviewed by Simon Riggs and by me. Some final
editing by me.
Discussion: http://postgr.es/m/7ff1e8ec-dc39-96b1-7f47-ff5965dceeac@lab.ntt.co.jp
|
| |
|
|
| |
Discussion: http://postgr.es/m/CA+TgmoaA9=1RWKtBWpDaj+sF3Stgc8sHgf5z=KGtbjwPLQVDMA@mail.gmail.com
|
|
|
Some code is moved from partition.c, which has grown very quickly lately;
splitting the executor parts out might help to keep it from getting
totally out of control. Other code is moved from execMain.c. All is
moved to a new file execPartition.c. get_partition_for_tuple now has
a new interface that more clearly separates executor concerns from
generic concerns.
Amit Langote. A slight comment tweak by me.
Discussion: http://postgr.es/m/1f0985f8-3b61-8bc4-4350-baa6d804cb6d@lab.ntt.co.jp
|
