| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Failing to do so results in an error when a pgbench script tries to
start a serializable transaction inside a pipeline, because by the time
BEGIN ISOLATION LEVEL SERIALIZABLE is executed, we're already in a
transaction that has acquired a snapshot, so the server rightfully
complains.
We can work around that by preparing all commands in the pipeline before
actually starting the pipeline. This changes the existing code in two
aspects: first, we now prepare each command individually at the point
where that command is about to be executed; previously, we would prepare
all commands in a script as soon as the first command of that script
would be executed. It's hard to see that this would make much of a
difference (particularly since it only affects the first time to execute
each script in a client), but I didn't actually try to measure it.
Secondly, we no longer use PQsendPrepare() in pipeline mode, but only
PQprepare. There's no specific reason for this change other than no
longer needing to do differently in pipeline mode. (Previously we had
no choice, because in pipeline mode PQprepare could not be used.)
Backpatch to 14, where pgbench got support for pipeline mode.
Reported-by: Yugo NAGATA <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/20210716153013.fc53b1c780b06fccc07a7f0d@sraoss.co.jp
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Historically we've accepted interval input like 'P.1e10D'. This
is probably an accident of having used strtod() to do the parsing,
rather than something anyone intended, but it's been that way for
a long time. Commit e39f99046 broke this by trying to parse the
integer and fractional parts separately, without accounting for
the possibility of an exponent. In principle that coding allowed
for precise conversions of field values wider than 15 decimal
digits, but that does not seem like a goal worth sweating bullets
for. So, rather than trying to manage an exponent on top of the
existing complexity, let's just revert to the previous coding that
used strtod() by itself. We can still improve on the old code to
the extent of allowing the value to range up to 1.0e15 rather than
only INT_MAX. (Allowing more than that risks creating problems
due to precision loss: the converted fractional part might have
absolute value more than 1. Perhaps that could be dealt with in
some way, but it really does not seem worth additional effort.)
Per bug #17795 from Alexander Lakhin. Back-patch to v15 where
the faulty code came in.
Discussion: https://postgr.es/m/17795-748d6db3ed95d313@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This was not something that required consideration before MERGE
was invented; but MERGE builds a join tree that left-joins to the
result relation, meaning that remove_useless_joins will consider
removing it. That should generally be stopped by the query's use
of output variables from the result relation. However, if the
result relation is inherited (e.g. a partitioned table) then
we don't add any row identity variables to the query until
expand_inherited_rtentry, which happens after join removal.
This was exposed as of commit 3c569049b, which made it possible
to deduce that a partitioned table could contain at most one row
matching a join key, enabling removal of the not-yet-expanded
result relation. Ooops.
To fix, let's just teach join_is_removable that the query result
rel is never removable. It's a cheap enough test in any case,
and it'll save some cycles that we'd otherwise expend in proving
that it's not removable, even in the cases we got right.
Back-patch to v15 where MERGE was added. Although I think the
case cannot be reached in v15, this seems like cheap insurance.
Per investigation of a report from Alexander Lakhin.
Discussion: https://postgr.es/m/36bee393-b351-16ac-93b2-d46d83637e45@gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
When evaluating clauses on multiple scan keys of a multi-column BRIN
index, we can stop processing as soon as we find a scan key eliminating
the range, and the range should not be added to tbe bitmap.
That's how it worked before 14, but since a681e3c107a the code treated
the range as matching if it matched at least the last scan key.
Backpatch to 14, where this code was introduced.
Backpatch-through: 14
Discussion: https://postgr.es/m/ebc18613-125e-60df-7520-fcbe0f9274fc%40enterprisedb.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ruleutils.c blindly printed the user-given alias (or nothing if there
hadn't been one) for the target table of INSERT/UPDATE/DELETE queries.
That works a large percentage of the time, but not always: for queries
appearing in WITH, it's possible that we chose a different alias to
avoid conflict with outer-scope names. Since the chosen alias would
be used in any Var references to the target table, this'd lead to an
inconsistent printout with consequences such as dump/restore failures.
The correct logic for printing (or not) a relation alias was embedded
in get_from_clause_item. Factor it out to a separate function so that
we don't need a jointree node to use it. (Only a limited part of that
function can be reached from these new call sites, but this seems like
the cleanest non-duplicative factorization.)
In passing, I got rid of a redundant "\d+ rules_src" step in rules.sql.
Initial report from Jonathan Katz; thanks to Vignesh C for analysis.
This has been broken for a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/e947fa21-24b2-f922-375a-d4f763ef3e4b@postgresql.org
Discussion: https://postgr.es/m/CALDaNm1MMntjmT_NJGp-Z=xbF02qHGAyuSHfYHias3TqQbPF2w@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
| |
On MERGE / WHEN MATCHED DELETE it's not possible to get cross-partition
updates, so we don't initialize cpUpdateRetrySlot; however, the code was
not careful to ignore the value in that case. Make it do so.
Backpatch to 15.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/17792-0f89452029662c36@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
OpenSSL 1.1.1 and newer versions have added support for RSA-PSS
certificates, which requires the use of a specific routine in OpenSSL to
determine which hash function to use when compiling it when using
channel binding in SCRAM-SHA-256. X509_get_signature_nid(), that is the
original routine the channel binding code has relied on, is not able to
determine which hash algorithm to use for such certificates. However,
X509_get_signature_info(), new to OpenSSL 1.1.1, is able to do it. This
commit switches the channel binding logic to rely on
X509_get_signature_info() over X509_get_signature_nid(), which would be
the choice when building with 1.1.1 or newer.
The error could have been triggered on the client or the server, hence
libpq and the backend need to have their related code paths patched.
Note that attempting to load an RSA-PSS certificate with OpenSSL 1.1.0
or older leads to a failure due to an unsupported algorithm.
The discovery of relying on X509_get_signature_info() comes from Jacob,
the tests have been written by Heikki (with few tweaks from me), while I
have bundled the whole together while adding the bits needed for MSVC
and meson.
This issue exists since channel binding exists, so backpatch all the way
down. Some tests are added in 15~, triggered if compiling with OpenSSL
1.1.1 or newer, where the certificate and key files can easily be
generated for RSA-PSS.
Reported-by: Gunnar "Nick" Bluth
Author: Jacob Champion, Heikki Linnakangas
Discussion: https://postgr.es/m/17760-b6c61e752ec07060@postgresql.org
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When an aggregate function is used as a WindowFunc and a tuple transitions
out of the window frame, we ordinarily try to make use of the aggregate
function's inverse transition function to "unaggregate" the exiting tuple.
This optimization is disabled for various cases, including when the
aggregate contains a volatile function. In such a case we'd be unable to
ensure that the transition value was calculated to the same value during
transitions and inverse transitions. Unfortunately, we did this check by
calling contain_volatile_functions() which does not recursively search
SubPlans for volatile functions. If the aggregate function's arguments or
its FILTER clause contained a subplan with volatile functions then we'd
fail to notice this.
Here we fix this by just disabling the optimization when the WindowFunc
contains any subplans. Volatile functions are not the only reason that a
subplan may have nonrepeatable results.
Bug: #17777
Reported-by: Anban Company
Discussion: https://postgr.es/m/17777-860b739b6efde977%40postgresql.org
Reviewed-by: Tom Lane
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit e39f99046 moved some code up closer to the start of
DecodeInterval(), without noticing that it had been implicitly
relying on previous checks to reject the case of empty input.
Given empty input, we'd now dereference a pointer that hadn't been
set, possibly leading to a core dump. (But if we fail to provoke
a SIGSEGV, nothing bad happens, and the expected syntax error is
thrown a bit later.)
Per bug #17788 from Alexander Lakhin. Back-patch to v15 where
the fault was introduced.
Discussion: https://postgr.es/m/17788-dabac9f98f7eafd5@postgresql.org
|
| |
|
|
|
|
|
|
|
| |
This reverts commit 1eadfbdd7eb0679ba8d45787aa8b2f06e76de20a
and thus reinstates commit 98e7234242a652497c99d4d0d6f2bf9a75d4e921.
It's a better time to commit this now that the release is over.
Discussion: http://postgr.es/m/3509384.1675878203@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
No GUCs that use NO_SHOW_ALL are reported in pg_show_all_settings(),
hence trying to check combinations of flags related to it is pointless.
These queries have been introduced by d10e41d, so backpatch down to 15
to keep all the branches consistent. Equivalent checks based on
NO_SHOW_ALL could be added in check_GUC_init() when a GUC is initially
loaded, but this can be done only on HEAD.
Author: Nitin Jadhav
Discussion: https://postgr.es/m/CAMm1aWaYe0muu3ABo7iSAgK+OWDS9yNe8GGRYnCyeEpScYKa+g@mail.gmail.com
Backpatch-through: 15
|
| |
|
|
|
|
|
|
|
| |
This reverts commit 98e7234242a652497c99d4d0d6f2bf9a75d4e921. I
forgot that we're about to wrap a release, and this fix isn't
critical enough to justify committing it right before we wrap
a release.
Discussion: http://postgr.es/m/2676424.1675700113@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
In standby mode, we don't actually report progress of recovery,
but up until now, startup_progress_timeout_handler() nevertheless
got called every log_startup_progress_interval seconds. That's
an unnecessary expense, so avoid it.
Report by Thomas Munro. Patch by Bharath Rupireddy, reviewed by
Simon Riggs, Thomas Munro, and me. Back-patch to v15, where
the problem was introduced.
Discussion: https://www.postgresql.org/message-id/CA%2BhUKGKCHSffAj8zZJKJvNX7ygnQFxVD6wm1d-2j3fVw%2BMafPQ%40mail.gmail.com
|
| |
|
|
|
| |
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 3748d8972214a3d1e316cffc19824cd948e9e2d8
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
pqsecure_open_gss() includes a code path handling error messages with
v2-style protocol messages coming from the server. The client-side
buffer holding the error message does not force a NULL-termination, with
the data of the server getting copied to the errorMessage of the
connection. Hence, it would be possible for a server to send an
unterminated string and copy arbitrary bytes in the buffer receiving the
error message in the client, opening the door to a crash or even data
exposure.
As at this stage of the authentication process the exchange has not been
completed yet, this could be abused by an attacker without Kerberos
credentials. Clients that have a valid kerberos cache are vulnerable as
libpq opportunistically requests for it except if gssencmode is
disabled.
Author: Jacob Champion
Backpatch-through: 12
Security: CVE-2022-41862
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The prior coding of int64_div_fast_to_numeric() had a number of bugs
that would cause it to fail under different circumstances, such as
with log10val2 <= 0, or log10val2 a multiple of 4, or in the "slow"
numeric path with log10val2 >= 10.
None of those could be triggered by any of our current code, which
only uses log10val2 = 3 or 6. However, they made it a hazard for any
future code that might use it. Also, since this is exported by
numeric.c, users writing their own C code might choose to use it.
Therefore fix, and back-patch to v14, where it was introduced.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCW8gXgW0tgPxPgHDPhVX71%2BSWFRkhnXy%2BTfGDsKLepu2g%40mail.gmail.com
|
| |
|
|
|
|
|
| |
DST law changes in Greenland and Mexico. Notably, a new timezone
America/Ciudad_Juarez has been split off from America/Ojinaga.
Historical corrections for northern Canada, Colombia, and Singapore.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This test has been added as of 857ee8e that has introduced the SQL
function txid_status(), with the purpose of checking that a transaction
ID still in-progress during a crash is correctly marked as aborted after
recovery finishes.
This test is unstable, and some configuration scenarios may that easier
to reproduce (wal_level=minimal, wal_compression=on) because the WAL
holding the information about the in-progress transaction ID may not
have made it to disk yet, hence a post-crash recovery may cause the same
XID to be reused, triggering a test failure.
We have discussed a few approaches, like making this function force a
WAL flush to make it reliable across crashes, but we don't want to pay a
performance penalty in some scenarios, as well. The test could have
been tweaked to enforce a checkpoint but that actually breaks the
promise of the test to rely on a stable result of txid_status() after
a crash.
This issue has been reported a few times across the past years, with an
original report from Kyotaro Horiguchi. The buildfarm machines tanager,
hachi and gokiburi enable wal_compression, and fail on this test
periodically.
Discussion: https://postgr.es/m/3163112.1674762209@sss.pgh.pa.us
Discussion: https://postgr.es/m/20210305.115011.558061052471425531.horikyota.ntt@gmail.com
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This fixes a bug that, under some circumstances, would cause MERGE to
fail to properly recompute expressions for GENERATED STORED columns.
Formerly, ExecInitModifyTable() did not call ExecInitStoredGenerated()
for a MERGE command, which meant that the generated expressions
information was not computed until later, when the first merge action
was executed. However, if the first merge action to execute was an
UPDATE, then ExecInitStoredGenerated() could decide to skip some some
generated columns, if the columns on which they depended were not
updated, which was a problem if the MERGE also contained an INSERT
action, for which no generated columns should be skipped.
So fix by having ExecInitModifyTable() call ExecInitStoredGenerated()
for MERGE, and assume that it isn't safe to skip any generated columns
in a MERGE. Possibly that could be relaxed, by allowing some generated
columns to be skipped for a MERGE without an INSERT action, but it's
not clear that it's worth the effort.
Noticed while investigating bug #17759. Back-patch to v15, where MERGE
was added.
Dean Rasheed, reviewed by Tom Lane.
Discussion:
https://postgr.es/m/17759-e76d9bece1b5421c%40postgresql.org
https://postgr.es/m/CAEZATCXb_ezoMCcL0tzKwRGA1x0oeE%3DawTaysRfTPq%2B3wNJn8g%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If the final chunk of an oversized tuple being written out to disk was
exactly 32760 bytes, it would be corrupted due to a fencepost bug.
Bug #17619. Back-patch to 11 where the code arrived.
While testing that (see test module in archives), I (tmunro) noticed
that the per-participant page counter was not initialized to zero as it
should have been; that wasn't a live bug when it was written since DSM
memory was originally always zeroed, but since 14
min_dynamic_shared_memory might be configured and it supplies non-zeroed
memory, so that is also fixed here.
Author: Dmitry Astapov <dastapov@gmail.com>
Discussion: https://postgr.es/m/17619-0de62ceda812b8b5%40postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The drop database command waits for the logical replication sync worker to
accept ProcSignalBarrier and the worker's slot creation waits for the drop
database to finish which leads to a deadlock. This happens because the
tablesync worker holds interrupts while creating a slot.
We prevent cancel/die interrupts while creating a slot in the table sync
worker because it is possible that before the server finishes this
command, a concurrent drop subscription happens which would complete
without removing this slot and that leads to the slot existing until the
end of walsender. However, the slot will eventually get dropped at the
walsender exit time, so there is no danger of the dangling slot.
This patch reallows cancel/die interrupts while creating a slot and
modifies the test to wait for slots to become zero to prevent finding an
ephemeral slot.
The reported hang doesn't happen in PG14 as the drop database starts to
wait for ProcSignalBarrier with PG15 (commits 4eb2176318 and e2f65f4255)
but it is good to backpatch this till PG14 as it is not a good idea to
prevent interrupts during a network call that could block indefinitely.
Reported-by: Lakshmi Narayanan Sreethar
Diagnosed-by: Andres Freund
Author: Hou Zhijie
Reviewed-by: Vignesh C, Amit Kapila
Backpatch-through: 14, where it was introduced in commit 6b67d72b60
Discussion: https://postgr.es/m/CA+kvmZELXQ4ZD3U=XCXuG3KvFgkuPoN1QrEj8c-rMRodrLOnsg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When libpqrcv_connect (also known as walrcv_connect()) failed, it leaked the
libpq connection. In most paths that's fairly harmless, as the calling process
will exit soon after. But e.g. CREATE SUBSCRIPTION could lead to a somewhat
longer lived leak.
Fix by releasing resources, including the libpq connection, on error.
Add a test exercising the error code path. To make it reliable and safe, the
test tries to connect to port=-1, which happens to fail during connection
establishment, rather than during connection string parsing.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20230121011237.q52apbvlarfv6jm6@awork3.anarazel.de
Backpatch: 11-
|
| |
|
|
|
|
|
|
|
|
| |
b762fed64 recently changed this test to prevent subquery pullup to allow
us to test Memoize with lateral_vars. As pointed out by Tom Lane, OFFSET
0 is our standard way of preventing subquery pullups, so do it that way
instead.
Discussion: https://postgr.es/m/2144818.1674517061@sss.pgh.pa.us
Backpatch-through: 14, same as b762fed64
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The test in question was meant to be testing Memoize to ensure it worked
correctly when the inner side of the join contained lateral vars, however,
nothing in the lateral subquery stopped it from being pulled up into the
main query, so the planner did that, and that meant no more lateral vars.
Here we add a simple ORDER BY to stop the planner from being able to
pullup the lateral subquery.
Author: Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_LHJaN4L-tXpKMiPFnsCJWU1P8Xh59o0W7AA6UN99=cQ@mail.gmail.com
Backpatch-through: 14, where Memoize was added.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit c4649cce39 removed the "shared" and "ntapes" arguments, but the
comment still talked about "shared". It also talked about "a shared
file handle", which was technically correct because even before commit
c4649cce39, the "shared file handle" referred to the "fileset"
argument, not "shared". But it was very confusing. Improve the
comment.
Also add a comment on what the "preallocate" argument does.
Backpatch to v15, just to make backpatching other patches easier in
the future.
Discussion: https://www.postgresql.org/message-id/af989685-91d5-aad4-8f60-1d066b5ec309@enterprisedb.com
Reviewed-by: Peter Eisentraut
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The motivation for this change is that when pg_dump dumps a
partitioned index that's marked REPLICA IDENTITY, it generates a
command sequence that applies REPLICA IDENTITY before the partitioned
index has been marked valid, causing restore to fail. We could
perhaps change pg_dump to not do it like that, but that would be
difficult and would not fix existing dump files with the problem.
There seems to be very little reason for the backend to disallow
this anyway --- the code ignores indisreplident when the index
isn't valid --- so instead let's fix it by allowing the case.
Commit 9511fb37a previously expressed a concern that allowing
indisreplident to be set on invalid indexes might allow us to
wind up in a situation where a table could have indisreplident
set on multiple indexes. I'm not sure I follow that concern
exactly, but in any case the only way that could happen is because
relation_mark_replica_identity is too trusting about the existing set
of markings being valid. Let's just rip out its early-exit code path
(which sure looks like premature optimization anyway; what are we
doing expending code to make redundant ALTER TABLE ... REPLICA
IDENTITY commands marginally faster and not-redundant ones marginally
slower?) and fix it to positively guarantee that no more than one
index is marked indisreplident.
The pg_dump failure can be demonstrated in all supported branches,
so back-patch all the way. I chose to back-patch 9511fb37a as well,
just to keep indisreplident handling the same in all branches.
Per bug #17756 from Sergey Belyashov.
Discussion: https://postgr.es/m/17756-dd50e8e0c8dd4a40@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
When the length was too short, the server read outside the allocation.
That yielded the same log noise as sending the correct length with
(backendPID,cancelAuthCode) matching nothing. Change to a message about
the unexpected length. Given the attacker's lack of control over the
memory layout and the general lack of diversity in memory layouts at the
code in question, we doubt a would-be attacker could cause a segfault.
Hence, while the report arrived via security@postgresql.org, this is not
a vulnerability. Back-patch to v11 (all supported versions).
Andrey Borodin, reviewed by Tom Lane. Reported by Andrey Borodin.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Add "#ifndef FRONTEND" where necessary to make pg_waldump build
on compilers that don't elide unused static-inline functions.
This back-patches relevant parts of commit 3e9ca5260, fixing build
breakage from dc7420c2c and back-patching of f10f0ae42.
Per recently-resurrected buildfarm member castoroides. We aren't
expecting castoroides to build anything newer than v11, but we
might as well clean up the intermediate branches while at it.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If the public schema has a non-default owner (perhaps due to
dropping and recreating it) then use of pg_dump's "--if-exists"
option results in a warning message:
warning: could not find where to insert IF EXISTS in statement "-- *not* dropping schema, since initdb creates it"
This is harmless since the dump output is the same either way,
but nonetheless it's undesirable. It's the fault of commit
a7a7be1f2, which created situations where a TOC entry's "defn"
or "dropStmt" fields could be just comments. Although that
commit fixed up the kluges in pg_backup_archiver.c that munge defn
strings, it missed doing so for the one that munges dropStmts.
Per bug# 17753 from Justin Zhang.
Discussion: https://postgr.es/m/17753-9c8773631747ee1c@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When ending recovery based on recovery_target_xid matching with
recovery_target_inclusive = off, we printed an incorrect timestamp
(always 2000-01-01) in the "recovery stopping before ... transaction"
log message. This is a consequence of sloppy refactoring in
c945af80c: the code to fetch recordXtime out of the commit/abort
record used to be executed unconditionally, but it was changed
to get called only in the RECOVERY_TARGET_TIME case. We need only
flip the order of operations to restore the intended behavior.
Per report from Torsten Förtsch. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/CAKkG4_kUevPqbmyOfLajx7opAQk6Cvwkvx0HRcFjSPfRPTXanA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is wrong since 88e9823, that has switched the WAL sizing
configuration from checkpoint_segments to min_wal_size and
max_wal_size. This missed the recalculation of the internal value of
the internal "CheckPointSegments", that works as a mapping of the old
GUC checkpoint_segments, on reload, for example, and it controls the
timing of checkpoints depending on the volume of WAL generated.
Most users tend to leave checkpoint_completion_target at 0.9 to smooth
the I/O workload, which is why I guess this has gone unnoticed for so
long, still it can be useful to tweak and reload the value dynamically
in some cases to control the timing of checkpoints.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACXgPPAm28mruojSBno+F_=9cTOOxHAywu_dfZPeBdybQw@mail.gmail.com
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
| |
No buildfarm members have reported that yet, but a recently-refreshed
Debian host did.
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/Y8ey5z4Nav62g4/K@paquier.xyz
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
test_extensions' test_ext_cine extension has the same upgrade hazard
as test_ext7: the regression test leaves it in an updated state
from which no downgrade path to default is provided. This causes
the update_extensions.sql script helpfully provided by pg_upgrade
to fail. So drop it in cross-version-upgrade testing.
Not entirely sure how come I didn't hit this in testing yesterday;
possibly I'd built the upgrade reference databases with
testmodules-install-check disabled.
Backpatch to v10 where this module was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To test pg_upgrade across major PG versions, we have to be able to
modify or drop any old objects with no-longer-supported properties,
and we have to be able to deal with cosmetic changes in pg_dump output.
Up to now, the buildfarm and pg_upgrade's own test infrastructure had
separate implementations of the former, and we had nothing but very
ad-hoc rules for the latter (including an arbitrary threshold on how
many lines of unchecked diff were okay!). This patch creates a Perl
module that can be shared by both those use-cases, and adds logic
that deals with pg_dump output diffs in a much more tightly defined
fashion.
This largely supersedes previous efforts in commits 0df9641d3,
9814ff550, and 62be9e4cd, which developed a SQL-script-based solution
for the task of dropping old objects. There was nothing fundamentally
wrong with that work in itself, but it had no basis for solving the
output-formatting problem. The most plausible way to deal with
formatting is to build a Perl module that can perform editing on the
dump files; and once we commit to that, it makes more sense for the
same module to also embed the knowledge of what has to be done for
dropping old objects.
Back-patch versions of the helper module as far as 9.2, to
support buildfarm animals that still test that far back.
It's also necessary to back-patch PostgreSQL/Version.pm,
because the new code depends on that. I fixed up pg_upgrade's
002_pg_upgrade.pl in v15, but did not look into back-patching
it further than that.
Tom Lane and Andrew Dunstan
Discussion: https://postgr.es/m/891521.1673657296@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Remove "%m" from error messages where errno would be bogus. Add short
read byte counts where appropriate.
This is equivalent to what was done in
7897e3bb902c557412645b82120f4d95f7474906, but some code was apparently
developed concurrently to that and not updated accordingly.
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f3501945-c591-8cc3-5ef0-b72a2e0eaa9c@enterprisedb.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
int2vectorin limited the number of array elements it'd take to
FUNC_MAX_ARGS, which is probably fine for the traditional use-cases.
But now that pg_publication_rel.prattrs is an int2vector, it's not
fine at all: it's easy to construct cases where that can have up to
about MaxTupleAttributeNumber entries. Trying to replicate such
tables leads to logical-replication failures.
As long as we have to touch this code anyway, let's just remove
the a-priori limit altogether, and let it accept any size that'll
be allowed by repalloc. (Note that since int2vector isn't toastable,
we cannot store arrays longer than about BLCKSZ/2; but there is no
good excuse for letting int2vectorin depend on that. Perhaps we
will lift the no-toast restriction someday.)
While at it, also improve the equivalent logic in oidvectorin.
I don't know of any practical use-case for long oidvectors right
now, but doing it right actually makes the code shorter.
Per report from Erik Rijkers. Back-patch to v15 where
pg_publication_rel.prattrs was added.
Discussion: https://postgr.es/m/668ba539-33c5-8190-ca11-def2913cb94b@xs4all.nl
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit 8bf6ec3ba I assumed that no code path could reach
ExecGetExtraUpdatedCols without having gone through
ExecInitStoredGenerated. That turns out not to be the case in
logical replication: if there's an ON UPDATE trigger on the target
table, trigger.c will call this code before anybody has set up its
generated columns. Having seen that, I don't have a lot of faith in
there not being other such paths. ExecGetExtraUpdatedCols can call
ExecInitStoredGenerated for itself, as long as we are willing to
assume that it is only called in CMD_UPDATE operations, which on
the whole seems like a safer leap of faith.
Per report from Vitaly Davydov.
Discussion: https://postgr.es/m/d259d69652b8c2ff50e14cda3c236c7f@postgrespro.ru
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The WAIT_USE_EPOLL and WAIT_USE_KQUEUE implementations of
WaitEventSetWaitBlock() confused the size of their internal buffer with
the size of the caller's output buffer, and could ask the kernel for too
many events. In fact the set of events retrieved from the kernel needs
to be able to fit in both buffers, so take the smaller of the two.
The WAIT_USE_POLL and WAIT_USE WIN32 implementations didn't have this
confusion.
This probably didn't come up before because we always used the same
number in both places, but commit 7389aad6 calculates a dynamic size at
construction time, while using MAXLISTEN for its output event buffer on
the stack. That seems like a reasonable thing to want to do, so
consider this to be a pre-existing bug worth fixing.
As discovered by valgrind on skink.
Back-patch to all supported releases for epoll, and to release 13 for
the kqueue part, which copied the incorrect epoll code.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/901504.1673504836%40sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The current jsonpath code assumes that the referenced variable always exists.
It could only throw an error at the value valuation time. At the same time
existence checking assumes variable is present without valuation, and error
suppression doesn't work for missing variables.
This commit makes existense checking trigger an error for missing variables.
This makes the overall behavior consistent.
Backpatch to 12 where jsonpath was introduced.
Reported-by: David G. Johnston
Discussion: https://postgr.es/m/CAKFQuwbeytffJkVnEqDyLZ%3DrQsznoTh1OgDoOF3VmOMkxcTMjA%40mail.gmail.com
Author: Alexander Korotkov, David G. Johnston
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The creation of a logical decoding context in CreateDecodingContext()
updates some data of its slot for two-phase transactions if enabled by
the caller, but the code forgot to acquire a spinlock when updating
these fields like any other code paths. This could lead to the read of
inconsistent data.
Oversight in a8fd13c.
Author: Sawada Masahiko
Discussion: https://postgr.es/m/CAD21AoAD8_fp47191LKuecjDd3DYhoQ4TaucFco1_TEr_jQ-Zw@mail.gmail.com
Backpatch-through: 15
|
| |
|
|
|
|
|
|
|
|
| |
The former code would only detect an unreachable WHEN clause if it had
an AND condition. Fix, so that unreachable unconditional WHEN clauses
are also detected.
Back-patch to v15, where MERGE was added.
Discussion: https://postgr.es/m/CAEZATCVQ=7E2z4cSBB49jjeGGsB6WeoYQY32NDeSvcHiLUZ=ow@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
After restart, we try to stream the changes for large transactions that
were not sent before server crash and restart. However, we forget to send
the abort message for such transactions. This leads to spurious streaming
files on the subscriber which won't be cleaned till the apply worker or
the subscriber server restarts.
Reported-by: Dilip Kumar
Author: Hou Zhijie
Reviewed-by: Dilip Kumar and Amit Kapila
Backpatch-through: 14
Discussion: https://postgr.es/m/OS0PR01MB5716A773F46768A1B75BE24394FB9@OS0PR01MB5716.jpnprd01.prod.outlook.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The ALTER DATABASE|FUNCTION|PROCEDURE|ROLE|ROUTINE|USER ... SET <name>
case in psql tab completion failed to exclude <name> = "SCHEMA", which
caused ALTER FUNCTION|PROCEDURE|ROUTINE ... SET SCHEMA to complete
with "FROM CURRENT" and "TO", which won't work.
Fix that, so that those cases now complete with the list of schemas,
like other ALTER ... SET SCHEMA commands.
Noticed while testing the recent patch to improve tab completion for
ALTER FUNCTION/PROCEDURE/ROUTINE, but this is not directly related to
that patch. Rather, this is a long-standing bug, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/CALDaNm0s7GQmkLP_mx5Cvk=UzYMnjhPmXBxU8DsHEunFbC5sTg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 57faaf376 added pg_truncate(const char *path, off_t length), but
"length" was ignored under WIN32 and the file was unconditionally
truncated to 0.
There was no live bug, since the only caller passes 0.
Fix, and back-patch to 14 where the function arrived.
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20230106031652.GR3109%40telsasoft.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We were identifying the updatable generated columns of inheritance
children by transposing the calculation made for their parent.
However, there's nothing that says a traditional-inheritance child
can't have generated columns that aren't there in its parent, or that
have different dependencies than are in the parent's expression.
(At present it seems that we don't enforce that for partitioning
either, which is likely wrong to some degree or other; but the case
clearly needs to be handled with traditional inheritance.)
Hence, drop the very-klugy-anyway "extraUpdatedCols" RTE field
in favor of identifying which generated columns depend on updated
columns during executor startup. In HEAD we can remove
extraUpdatedCols altogether; in back branches, it's still there but
always empty. Another difference between the HEAD and back-branch
versions of this patch is that in HEAD we can add the new bitmap field
to ResultRelInfo, but that would cause an ABI break in back branches.
Like 4b3e37993, add a List field at the end of struct EState instead.
Back-patch to v13. The bogus calculation is also being made in v12,
but it doesn't have the same visible effect because we don't use it
to decide which generated columns to recalculate; as a consequence of
which the patch doesn't apply easily. I think that there might still
be a demonstrable bug associated with trigger firing conditions, but
that's such a weird corner-case usage that I'm content to leave it
unfixed in v12.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqFshLKNvQUd1DgwJ-7tsTp=dwv7KZqXC4j2wYBV1aCDUA@mail.gmail.com
Discussion: https://postgr.es/m/2793383.1672944799@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
| |
While on it, newlines are removed from the end of two elog() strings.
The others are simple grammar mistakes. One comment in pg_upgrade
referred incorrectly to sequences since a7e5457.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20221230231257.GI1153@telsasoft.com
Backpatch-through: 11
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
New versions of perl trigger warnings within perl.h with our compiler
flags. At least -Wdeclaration-after-statement, -Wshadow=compatible-local are
known to be problematic.
To avoid these warnings, conditionally use #pragma GCC system_header before
including plperl.h.
Alternatively, we could add the include paths for problematic headers with
-isystem, but that is a larger hammer and is harder to search for.
A more granular alternative would be to use #pragma GCC diagnostic
push/ignored/pop, but gcc warns about unknown warnings being ignored, so every
to-be-ignored-temporarily compiler warning would require its own pg_config.h
symbol and #ifdef.
As the warnings are voluminous, it makes sense to backpatch this change. But
don't do so yet, we first want gather buildfarm coverage - it's e.g. possible
that some compiler claiming to be gcc compatible has issues with the pragma.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: Discussion: https://postgr.es/m/20221228182455.hfdwd22zztvkojy2@awork3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When considering an empty grouping set, we fetched
phasedata->eqfunctions[-1]. Because the eqfunctions array is
palloc'd, that would always be an aset pointer in released versions,
and thus the code accidentally failed to malfunction (since it would
do nothing unless it found a null pointer). Nonetheless this seems
like trouble waiting to happen, so add a check for length == 0.
It's depressing that our valgrind testing did not catch this.
Maybe we should reconsider the choice to not mark that word NOACCESS?
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-vZuuPOZsKOYnSAaPYGKhmacxhki+vpOKk0O7rymccXQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Cirrus is about to shut down its macOS-on-Intel support, so it's time to
move our CI testing over to ARM instances. The Homebrew package manager
changed its default installation prefix for the new architecture, so a
couple of tests need tweaks to find binaries.
Back-patch to 15, where in-tree CI began.
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20221122225744.GF11463%40telsasoft.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When brin_minmax_multi_union merges summaries, we may end up with just a
single range after merge_overlapping_ranges. The summaries may contain
just one range each, and they may overlap (or be exactly the same).
With a single range there's no distance to calculate, but we happen to
call build_distances anyway - which is fine, we don't calculate the
distance in this case, except that with asserts this failed due to a
check there are at least two ranges.
The assert is unnecessarily strict, so relax it a bit and bail out if
there's just a single range. The relaxed assert would be enough, but
this way we don't allocate unnecessary memory for distance.
Backpatch to 14, where minmax-multi opclasses were introduced.
Reported-by: Jaime Casanova
Backpatch-through: 14
Discussion: https://postgr.es/m/YzVA55qS0hgz8P3r@ahch-to
|
