path: root/src/backend/commands/copyfromparse.c

/*-------------------------------------------------------------------------
 *
 * copyfromparse.c
 *		Parse CSV/text/binary format for COPY FROM.
 *
 * Portions Copyright (c) 1996-2021, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  src/backend/commands/copyfromparse.c
 *
 *-------------------------------------------------------------------------
 */
#include "postgres.h"

#include <ctype.h>
#include <unistd.h>
#include <sys/stat.h>

#include "commands/copy.h"
#include "commands/copyfrom_internal.h"
#include "executor/executor.h"
#include "libpq/libpq.h"
#include "libpq/pqformat.h"
#include "mb/pg_wchar.h"
#include "miscadmin.h"
#include "port/pg_bswap.h"
#include "utils/memutils.h"
#include "utils/rel.h"

#define ISOCTAL(c) (((c) >= '0') && ((c) <= '7'))
#define OCTVALUE(c) ((c) - '0')

/*
 * These macros centralize code used to process line_buf and raw_buf buffers.
 * They are macros because they often do continue/break control and to avoid
 * function call overhead in tight COPY loops.
 *
 * We must use "if (1)" because the usual "do {...} while(0)" wrapper would
 * prevent the continue/break processing from working.  We end the "if (1)"
 * with "else ((void) 0)" to ensure the "if" does not unintentionally match
 * any "else" in the calling code, and to avoid any compiler warnings about
 * empty statements.  See http://www.cit.gu.edu.au/~anthony/info/C/C.macros.
 */

/*
 * This keeps the character read at the top of the loop in the buffer
 * even if there is more than one read-ahead.
 */
#define IF_NEED_REFILL_AND_NOT_EOF_CONTINUE(extralen) \
if (1) \
{ \
	if (raw_buf_ptr + (extralen) >= copy_buf_len && !hit_eof) \
	{ \
		raw_buf_ptr = prev_raw_ptr; /* undo fetch */ \
		need_data = true; \
		continue; \
	} \
} else ((void) 0)

/* This consumes the remainder of the buffer and breaks */
#define IF_NEED_REFILL_AND_EOF_BREAK(extralen) \
if (1) \
{ \
	if (raw_buf_ptr + (extralen) >= copy_buf_len && hit_eof) \
	{ \
		if (extralen) \
			raw_buf_ptr = copy_buf_len; /* consume the partial character */ \
		/* backslash just before EOF, treat as data char */ \
		result = true; \
		break; \
	} \
} else ((void) 0)

/*
 * Transfer any approved data to line_buf; must do this to be sure
 * there is some room in raw_buf.
 */
#define REFILL_LINEBUF \
if (1) \
{ \
	if (raw_buf_ptr > cstate->raw_buf_index) \
	{ \
		appendBinaryStringInfo(&cstate->line_buf, \
							 cstate->raw_buf + cstate->raw_buf_index, \
							   raw_buf_ptr - cstate->raw_buf_index); \
		cstate->raw_buf_index = raw_buf_ptr; \
	} \
} else ((void) 0)

/* Undo any read-ahead and jump out of the block. */
#define NO_END_OF_COPY_GOTO \
if (1) \
{ \
	raw_buf_ptr = prev_raw_ptr + 1; \
	goto not_end_of_copy; \
} else ((void) 0)

/* NOTE: there's a copy of this in copyto.c */
static const char BinarySignature[11] = "PGCOPY\n\377\r\n\0";


/* non-export function prototypes */
static bool CopyReadLine(CopyFromState cstate);
static bool CopyReadLineText(CopyFromState cstate);
static int	CopyReadAttributesText(CopyFromState cstate);
static int	CopyReadAttributesCSV(CopyFromState cstate);
static Datum CopyReadBinaryAttribute(CopyFromState cstate, FmgrInfo *flinfo,
									 Oid typioparam, int32 typmod,
									 bool *isnull);


/* Low-level communications functions */
static int	CopyGetData(CopyFromState cstate, void *databuf,
						int minread, int maxread);
static inline bool CopyGetInt32(CopyFromState cstate, int32 *val);
static inline bool CopyGetInt16(CopyFromState cstate, int16 *val);
static bool CopyLoadRawBuf(CopyFromState cstate);
static int	CopyReadBinaryData(CopyFromState cstate, char *dest, int nbytes);

void
ReceiveCopyBegin(CopyFromState cstate)
{
	if (PG_PROTOCOL_MAJOR(FrontendProtocol) >= 3)
	{
		/* new way */
		StringInfoData buf;
		int			natts = list_length(cstate->attnumlist);
		int16		format = (cstate->opts.binary ? 1 : 0);
		int			i;

		pq_beginmessage(&buf, 'G');
		pq_sendbyte(&buf, format);	/* overall format */
		pq_sendint16(&buf, natts);
		for (i = 0; i < natts; i++)
			pq_sendint16(&buf, format); /* per-column formats */
		pq_endmessage(&buf);
		cstate->copy_src = COPY_NEW_FE;
		cstate->fe_msgbuf = makeStringInfo();
	}
	else
	{
		/* old way */
		if (cstate->opts.binary)
			ereport(ERROR,
					(errcode(ERRCODE_FEATURE_NOT_SUPPORTED),
					 errmsg("COPY BINARY is not supported to stdout or from stdin")));
		pq_putemptymessage('G');
		/* any error in old protocol will make us lose sync */
		pq_startmsgread();
		cstate->copy_src = COPY_OLD_FE;
	}
	/* We *must* flush here to ensure FE knows it can send. */
	pq_flush();
}

void
ReceiveCopyBinaryHeader(CopyFromState cstate)
{
	char		readSig[11];
	int32		tmp;

	/* Signature */
	if (CopyReadBinaryData(cstate, readSig, 11) != 11 ||
		memcmp(readSig, BinarySignature, 11) != 0)
		ereport(ERROR,
				(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
				 errmsg("COPY file signature not recognized")));
	/* Flags field */
	if (!CopyGetInt32(cstate, &tmp))
		ereport(ERROR,
				(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
				 errmsg("invalid COPY file header (missing flags)")));
	if ((tmp & (1 << 16)) != 0)
		ereport(ERROR,
				(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
				 errmsg("invalid COPY file header (WITH OIDS)")));
	tmp &= ~(1 << 16);
	if ((tmp >> 16) != 0)
		ereport(ERROR,
				(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
				 errmsg("unrecognized critical flags in COPY file header")));
	/* Header extension length */
	if (!CopyGetInt32(cstate, &tmp) ||
		tmp < 0)
		ereport(ERROR,
				(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
				 errmsg("invalid COPY file header (missing length)")));
	/* Skip extension header, if present */
	while (tmp-- > 0)
	{
		if (CopyReadBinaryData(cstate, readSig, 1) != 1)
			ereport(ERROR,
					(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
					 errmsg("invalid COPY file header (wrong length)")));
	}
}

/*
 * CopyGetData reads data from the source (file or frontend)
 *
 * We attempt to read at least minread, and at most maxread, bytes from
 * the source.  The actual number of bytes read is returned; if this is
 * less than minread, EOF was detected.
 *
 * Note: when copying from the frontend, we expect a proper EOF mark per
 * protocol; if the frontend simply drops the connection, we raise error.
 * It seems unwise to allow the COPY IN to complete normally in that case.
 *
 * NB: no data conversion is applied here.
 */
static int
CopyGetData(CopyFromState cstate, void *databuf, int minread, int maxread)
{
	int			bytesread = 0;

	switch (cstate->copy_src)
	{
		case COPY_FILE:
			bytesread = fread(databuf, 1, maxread, cstate->copy_file);
			if (ferror(cstate->copy_file))
				ereport(ERROR,
						(errcode_for_file_access(),
						 errmsg("could not read from COPY file: %m")));
			if (bytesread == 0)
				cstate->reached_eof = true;
			break;
		case COPY_OLD_FE:

			/*
			 * We cannot read more than minread bytes (which in practice is 1)
			 * because old protocol doesn't have any clear way of separating
			 * the COPY stream from following data.  This is slow, but not any
			 * slower than the code path was originally, and we don't care
			 * much anymore about the performance of old protocol.
			 */
			if (pq_getbytes((char *) databuf, minread))
			{
				/* Only a \. terminator is legal EOF in old protocol */
				ereport(ERROR,
						(errcode(ERRCODE_CONNECTION_FAILURE),
						 errmsg("unexpected EOF on client connection with an open transaction")));
			}
			bytesread = minread;
			break;
		case COPY_NEW_FE:
			while (maxread > 0 && bytesread < minread && !cstate->reached_eof)
			{
				int			avail;

				while (cstate->fe_msgbuf->cursor >= cstate->fe_msgbuf->len)
				{
					/* Try to receive another message */
					int			mtype;

			readmessage:
					HOLD_CANCEL_INTERRUPTS();
					pq_startmsgread();
					mtype = pq_getbyte();
					if (mtype == EOF)
						ereport(ERROR,
								(errcode(ERRCODE_CONNECTION_FAILURE),
								 errmsg("unexpected EOF on client connection with an open transaction")));
					if (pq_getmessage(cstate->fe_msgbuf, 0))
						ereport(ERROR,
								(errcode(ERRCODE_CONNECTION_FAILURE),
								 errmsg("unexpected EOF on client connection with an open transaction")));
					RESUME_CANCEL_INTERRUPTS();
					switch (mtype)
					{
						case 'd':	/* CopyData */
							break;
						case 'c':	/* CopyDone */
							/* COPY IN correctly terminated by frontend */
							cstate->reached_eof = true;
							return bytesread;
						case 'f':	/* CopyFail */
							ereport(ERROR,
									(errcode(ERRCODE_QUERY_CANCELED),
									 errmsg("COPY from stdin failed: %s",
											pq_getmsgstring(cstate->fe_msgbuf))));
							break;
						case 'H':	/* Flush */
						case 'S':	/* Sync */

							/*
							 * Ignore Flush/Sync for the convenience of client
							 * libraries (such as libpq) that may send those
							 * without noticing that the command they just
							 * sent was COPY.
							 */
							goto readmessage;
						default:
							ereport(ERROR,
									(errcode(ERRCODE_PROTOCOL_VIOLATION),
									 errmsg("unexpected message type 0x%02X during COPY from stdin",
											mtype)));
							break;
					}
				}
				avail = cstate->fe_msgbuf->len - cstate->fe_msgbuf->cursor;
				if (avail > maxread)
					avail = maxread;
				pq_copymsgbytes(cstate->fe_msgbuf, databuf, avail);
				databuf = (void *) ((char *) databuf + avail);
				maxread -= avail;
				bytesread += avail;
			}
			break;
		case COPY_CALLBACK:
			bytesread = cstate->data_source_cb(databuf, minread, maxread);
			break;
	}

	return bytesread;
}


/*
 * These functions do apply some data conversion
 */

/*
 * CopyGetInt32 reads an int32 that appears in network byte order
 *
 * Returns true if OK, false if EOF
 */
static inline bool
CopyGetInt32(CopyFromState cstate, int32 *val)
{
	uint32		buf;

	if (CopyReadBinaryData(cstate, (char *) &buf, sizeof(buf)) != sizeof(buf))
	{
		*val = 0;				/* suppress compiler warning */
		return false;
	}
	*val = (int32) pg_ntoh32(buf);
	return true;
}

/*
 * CopyGetInt16 reads an int16 that appears in network byte order
 */
static inline bool
CopyGetInt16(CopyFromState cstate, int16 *val)
{
	uint16		buf;

	if (CopyReadBinaryData(cstate, (char *) &buf, sizeof(buf)) != sizeof(buf))
	{
		*val = 0;				/* suppress compiler warning */
		return false;
	}
	*val = (int16) pg_ntoh16(buf);
	return true;
}


/*
 * CopyLoadRawBuf loads some more data into raw_buf
 *
 * Returns true if able to obtain at least one more byte, else false.
 *
 * If RAW_BUF_BYTES(cstate) > 0, the unprocessed bytes are moved to the start
 * of the buffer and then we load more data after that.  This case occurs only
 * when a multibyte character crosses a bufferload boundary.
 */
static bool
CopyLoadRawBuf(CopyFromState cstate)
{
	int			nbytes = RAW_BUF_BYTES(cstate);
	int			inbytes;

	/* Copy down the unprocessed data if any. */
	if (nbytes > 0)
		memmove(cstate->raw_buf, cstate->raw_buf + cstate->raw_buf_index,
				nbytes);

	inbytes = CopyGetData(cstate, cstate->raw_buf + nbytes,
						  1, RAW_BUF_SIZE - nbytes);
	nbytes += inbytes;
	cstate->raw_buf[nbytes] = '\0';
	cstate->raw_buf_index = 0;
	cstate->raw_buf_len = nbytes;
	return (inbytes > 0);
}

/*
 * CopyReadBinaryData
 *
 * Reads up to 'nbytes' bytes from cstate->copy_file via cstate->raw_buf
 * and writes them to 'dest'.  Returns the number of bytes read (which
 * would be less than 'nbytes' only if we reach EOF).
 */
static int
CopyReadBinaryData(CopyFromState cstate, char *dest, int nbytes)
{
	int			copied_bytes = 0;

	if (RAW_BUF_BYTES(cstate) >= nbytes)
	{
		/* Enough bytes are present in the buffer. */
		memcpy(dest, cstate->raw_buf + cstate->raw_buf_index, nbytes);
		cstate->raw_buf_index += nbytes;
		copied_bytes = nbytes;
	}
	else
	{
		/*
		 * Not enough bytes in the buffer, so must read from the file.  Need
		 * to loop since 'nbytes' could be larger than the buffer size.
		 */
		do
		{
			int			copy_bytes;

			/* Load more data if buffer is empty. */
			if (RAW_BUF_BYTES(cstate) == 0)
			{
				if (!CopyLoadRawBuf(cstate))
					break;		/* EOF */
			}

			/* Transfer some bytes. */
			copy_bytes = Min(nbytes - copied_bytes, RAW_BUF_BYTES(cstate));
			memcpy(dest, cstate->raw_buf + cstate->raw_buf_index, copy_bytes);
			cstate->raw_buf_index += copy_bytes;
			dest += copy_bytes;
			copied_bytes += copy_bytes;
		} while (copied_bytes < nbytes);
	}

	return copied_bytes;
}

/*
 * Read raw fields in the next line for COPY FROM in text or csv mode.
 * Return false if no more lines.
 *
 * An internal temporary buffer is returned via 'fields'. It is valid until
 * the next call of the function. Since the function returns all raw fields
 * in the input file, 'nfields' could be different from the number of columns
 * in the relation.
 *
 * NOTE: force_not_null option are not applied to the returned fields.
 */
bool
NextCopyFromRawFields(CopyFromState cstate, char ***fields, int *nfields)
{
	int			fldct;
	bool		done;

	/* only available for text or csv input */
	Assert(!cstate->opts.binary);

	/* on input just throw the header line away */
	if (cstate->cur_lineno == 0 && cstate->opts.header_line)
	{
		cstate->cur_lineno++;
		if (CopyReadLine(cstate))
			return false;		/* done */
	}

	cstate->cur_lineno++;

	/* Actually read the line into memory here */
	done = CopyReadLine(cstate);

	/*
	 * EOF at start of line means we're done.  If we see EOF after some
	 * characters, we act as though it was newline followed by EOF, ie,
	 * process the line and then exit loop on next iteration.
	 */
	if (done && cstate->line_buf.len == 0)
		return false;

	/* Parse the line into de-escaped field values */
	if (cstate->opts.csv_mode)
		fldct = CopyReadAttributesCSV(cstate);
	else
		fldct = CopyReadAttributesText(cstate);

	*fields = cstate->raw_fields;
	*nfields = fldct;
	return true;
}

/*
 * Read next tuple from file for COPY FROM. Return false if no more tuples.
 *
 * 'econtext' is used to evaluate default expression for each columns not
 * read from the file. It can be NULL when no default values are used, i.e.
 * when all columns are read from the file.
 *
 * 'values' and 'nulls' arrays must be the same length as columns of the
 * relation passed to BeginCopyFrom. This function fills the arrays.
 */
bool
NextCopyFrom(CopyFromState cstate, ExprContext *econtext,
			 Datum *values, bool *nulls)
{
	TupleDesc	tupDesc;
	AttrNumber	num_phys_attrs,
				attr_count,
				num_defaults = cstate->num_defaults;
	FmgrInfo   *in_functions = cstate->in_functions;
	Oid		   *typioparams = cstate->typioparams;
	int			i;
	int		   *defmap = cstate->defmap;
	ExprState **defexprs = cstate->defexprs;

	tupDesc = RelationGetDescr(cstate->rel);
	num_phys_attrs = tupDesc->natts;
	attr_count = list_length(cstate->attnumlist);

	/* Initialize all values for row to NULL */
	MemSet(values, 0, num_phys_attrs * sizeof(Datum));
	MemSet(nulls, true, num_phys_attrs * sizeof(bool));

	if (!cstate->opts.binary)
	{
		char	  **field_strings;
		ListCell   *cur;
		int			fldct;
		int			fieldno;
		char	   *string;

		/* read raw fields in the next line */
		if (!NextCopyFromRawFields(cstate, &field_strings, &fldct))
			return false;

		/* check for overflowing fields */
		if (attr_count > 0 && fldct > attr_count)
			ereport(ERROR,
					(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
					 errmsg("extra data after last expected column")));

		fieldno = 0;

		/* Loop to read the user attributes on the line. */
		foreach(cur, cstate->attnumlist)
		{
			int			attnum = lfirst_int(cur);
			int			m = attnum - 1;
			Form_pg_attribute att = TupleDescAttr(tupDesc, m);

			if (fieldno >= fldct)
				ereport(ERROR,
						(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
						 errmsg("missing data for column \"%s\"",
								NameStr(att->attname))));
			string = field_strings[fieldno++];

			if (cstate->convert_select_flags &&
				!cstate->convert_select_flags[m])
			{
				/* ignore input field, leaving column as NULL */
				continue;
			}

			if (cstate->opts.csv_mode)
			{
				if (string == NULL &&
					cstate->opts.force_notnull_flags[m])
				{
					/*
					 * FORCE_NOT_NULL option is set and column is NULL -
					 * convert it to the NULL string.
					 */
					string = cstate->opts.null_print;
				}
				else if (string != NULL && cstate->opts.force_null_flags[m]
						 && strcmp(string, cstate->opts.null_print) == 0)
				{
					/*
					 * FORCE_NULL option is set and column matches the NULL
					 * string. It must have been quoted, or otherwise the
					 * string would already have been set to NULL. Convert it
					 * to NULL as specified.
					 */
					string = NULL;
				}
			}

			cstate->cur_attname = NameStr(att->attname);
			cstate->cur_attval = string;
			values[m] = InputFunctionCall(&in_functions[m],
										  string,
										  typioparams[m],
										  att->atttypmod);
			if (string != NULL)
				nulls[m] = false;
			cstate->cur_attname = NULL;
			cstate->cur_attval = NULL;
		}

		Assert(fieldno == attr_count);
	}
	else
	{
		/* binary */
		int16		fld_count;
		ListCell   *cur;

		cstate->cur_lineno++;

		if (!CopyGetInt16(cstate, &fld_count))
		{
			/* EOF detected (end of file, or protocol-level EOF) */
			return false;
		}

		if (fld_count == -1)
		{
			/*
			 * Received EOF marker.  In a V3-protocol copy, wait for the
			 * protocol-level EOF, and complain if it doesn't come
			 * immediately.  This ensures that we correctly handle CopyFail,
			 * if client chooses to send that now.
			 *
			 * Note that we MUST NOT try to read more data in an old-protocol
			 * copy, since there is no protocol-level EOF marker then.  We
			 * could go either way for copy from file, but choose to throw
			 * error if there's data after the EOF marker, for consistency
			 * with the new-protocol case.
			 */
			char		dummy;

			if (cstate->copy_src != COPY_OLD_FE &&
				CopyReadBinaryData(cstate, &dummy, 1) > 0)
				ereport(ERROR,
						(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
						 errmsg("received copy data after EOF marker")));
			return false;
		}

		if (fld_count != attr_count)
			ereport(ERROR,
					(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
					 errmsg("row field count is %d, expected %d",
							(int) fld_count, attr_count)));

		foreach(cur, cstate->attnumlist)
		{
			int			attnum = lfirst_int(cur);
			int			m = attnum - 1;
			Form_pg_attribute att = TupleDescAttr(tupDesc, m);

			cstate->cur_attname = NameStr(att->attname);
			values[m] = CopyReadBinaryAttribute(cstate,
												&in_functions[m],
												typioparams[m],
												att->atttypmod,
												&nulls[m]);
			cstate->cur_attname = NULL;
		}
	}

	/*
	 * Now compute and insert any defaults available for the columns not
	 * provided by the input data.  Anything not processed here or above will
	 * remain NULL.
	 */
	for (i = 0; i < num_defaults; i++)
	{
		/*
		 * The caller must supply econtext and have switched into the
		 * per-tuple memory context in it.
		 */
		Assert(econtext != NULL);
		Assert(CurrentMemoryContext == econtext->ecxt_per_tuple_memory);

		values[defmap[i]] = ExecEvalExpr(defexprs[i], econtext,
										 &nulls[defmap[i]]);
	}

	return true;
}

/*
 * Read the next input line and stash it in line_buf, with conversion to
 * server encoding.
 *
 * Result is true if read was terminated by EOF, false if terminated
 * by newline.  The terminating newline or EOF marker is not included
 * in the final value of line_buf.
 */
static bool
CopyReadLine(CopyFromState cstate)
{
	bool		result;

	resetStringInfo(&cstate->line_buf);
	cstate->line_buf_valid = true;

	/* Mark that encoding conversion hasn't occurred yet */
	cstate->line_buf_converted = false;

	/* Parse data and transfer into line_buf */
	result = CopyReadLineText(cstate);

	if (result)
	{
		/*
		 * Reached EOF.  In protocol version 3, we should ignore anything
		 * after \. up to the protocol end of copy data.  (XXX maybe better
		 * not to treat \. as special?)
		 */
		if (cstate->copy_src == COPY_NEW_FE)
		{
			do
			{
				cstate->raw_buf_index = cstate->raw_buf_len;
			} while (CopyLoadRawBuf(cstate));
		}
	}
	else
	{
		/*
		 * If we didn't hit EOF, then we must have transferred the EOL marker
		 * to line_buf along with the data.  Get rid of it.
		 */
		switch (cstate->eol_type)
		{
			case EOL_NL:
				Assert(cstate->line_buf.len >= 1);
				Assert(cstate->line_buf.data[cstate->line_buf.len - 1] == '\n');
				cstate->line_buf.len--;
				cstate->line_buf.data[cstate->line_buf.len] = '\0';
				break;
			case EOL_CR:
				Assert(cstate->line_buf.len >= 1);
				Assert(cstate->line_buf.data[cstate->line_buf.len - 1] == '\r');
				cstate->line_buf.len--;
				cstate->line_buf.data[cstate->line_buf.len] = '\0';
				break;
			case EOL_CRNL:
				Assert(cstate->line_buf.len >= 2);
				Assert(cstate->line_buf.data[cstate->line_buf.len - 2] == '\r');
				Assert(cstate->line_buf.data[cstate->line_buf.len - 1] == '\n');
				cstate->line_buf.len -= 2;
				cstate->line_buf.data[cstate->line_buf.len] = '\0';
				break;
			case EOL_UNKNOWN:
				/* shouldn't get here */
				Assert(false);
				break;
		}
	}

	/* Done reading the line.  Convert it to server encoding. */
	if (cstate->need_transcoding)
	{
		char	   *cvt;

		cvt = pg_any_to_server(cstate->line_buf.data,
							   cstate->line_buf.len,
							   cstate->file_encoding);
		if (cvt != cstate->line_buf.data)
		{
			/* transfer converted data back to line_buf */
			resetStringInfo(&cstate->line_buf);
			appendBinaryStringInfo(&cstate->line_buf, cvt, strlen(cvt));
			pfree(cvt);
		}
	}

	/* Now it's safe to use the buffer in error messages */
	cstate->line_buf_converted = true;

	return result;
}

/*
 * CopyReadLineText - inner loop of CopyReadLine for text mode
 */
static bool
CopyReadLineText(CopyFromState cstate)
{
	char	   *copy_raw_buf;
	int			raw_buf_ptr;
	int			copy_buf_len;
	bool		need_data = false;
	bool		hit_eof = false;
	bool		result = false;
	char		mblen_str[2];

	/* CSV variables */
	bool		first_char_in_line = true;
	bool		in_quote = false,
				last_was_esc = false;
	char		quotec = '\0';
	char		escapec = '\0';

	if (cstate->opts.csv_mode)
	{
		quotec = cstate->opts.quote[0];
		escapec = cstate->opts.escape[0];
		/* ignore special escape processing if it's the same as quotec */
		if (quotec == escapec)
			escapec = '\0';
	}

	mblen_str[1] = '\0';

	/*
	 * The objective of this loop is to transfer the entire next input line
	 * into line_buf.  Hence, we only care for detecting newlines (\r and/or
	 * \n) and the end-of-copy marker (\.).
	 *
	 * In CSV mode, \r and \n inside a quoted field are just part of the data
	 * value and are put in line_buf.  We keep just enough state to know if we
	 * are currently in a quoted field or not.
	 *
	 * These four characters, and the CSV escape and quote characters, are
	 * assumed the same in frontend and backend encodings.
	 *
	 * For speed, we try to move data from raw_buf to line_buf in chunks
	 * rather than one character at a time.  raw_buf_ptr points to the next
	 * character to examine; any characters from raw_buf_index to raw_buf_ptr
	 * have been determined to be part of the line, but not yet transferred to
	 * line_buf.
	 *
	 * For a little extra speed within the loop, we copy raw_buf and
	 * raw_buf_len into local variables.
	 */
	copy_raw_buf = cstate->raw_buf;
	raw_buf_ptr = cstate->raw_buf_index;
	copy_buf_len = cstate->raw_buf_len;

	for (;;)
	{
		int			prev_raw_ptr;
		char		c;

		/*
		 * Load more data if needed.  Ideally we would just force four bytes
		 * of read-ahead and avoid the many calls to
		 * IF_NEED_REFILL_AND_NOT_EOF_CONTINUE(), but the COPY_OLD_FE protocol
		 * does not allow us to read too far ahead or we might read into the
		 * next data, so we read-ahead only as far we know we can.  One
		 * optimization would be to read-ahead four byte here if
		 * cstate->copy_src != COPY_OLD_FE, but it hardly seems worth it,
		 * considering the size of the buffer.
		 */
		if (raw_buf_ptr >= copy_buf_len || need_data)
		{
			REFILL_LINEBUF;

			/*
			 * Try to read some more data.  This will certainly reset
			 * raw_buf_index to zero, and raw_buf_ptr must go with it.
			 */
			if (!CopyLoadRawBuf(cstate))
				hit_eof = true;
			raw_buf_ptr = 0;
			copy_buf_len = cstate->raw_buf_len;

			/*
			 * If we are completely out of data, break out of the loop,
			 * reporting EOF.
			 */
			if (copy_buf_len <= 0)
			{
				result = true;
				break;
			}
			need_data = false;
		}

		/* OK to fetch a character */
		prev_raw_ptr = raw_buf_ptr;
		c = copy_raw_buf[raw_buf_ptr++];

		if (cstate->opts.csv_mode)
		{
			/*
			 * If character is '\\' or '\r', we may need to look ahead below.
			 * Force fetch of the next character if we don't already have it.
			 * We need to do this before changing CSV state, in case one of
			 * these characters is also the quote or escape character.
			 *
			 * Note: old-protocol does not like forced prefetch, but it's OK
			 * here since we cannot validly be at EOF.
			 */
			if (c == '\\' || c == '\r')
			{
				IF_NEED_REFILL_AND_NOT_EOF_CONTINUE(0);
			}

			/*
			 * Dealing with quotes and escapes here is mildly tricky. If the
			 * quote char is also the escape char, there's no problem - we
			 * just use the char as a toggle. If they are different, we need
			 * to ensure that we only take account of an escape inside a
			 * quoted field and immediately preceding a quote char, and not
			 * the second in an escape-escape sequence.
			 */
			if (in_quote && c == escapec)
				last_was_esc = !last_was_esc;
			if (c == quotec && !last_was_esc)
				in_quote = !in_quote;
			if (c != escapec)
				last_was_esc = false;

			/*
			 * Updating the line count for embedded CR and/or LF chars is
			 * necessarily a little fragile - this test is probably about the
			 * best we can do.  (XXX it's arguable whether we should do this
			 * at all --- is cur_lineno a physical or logical count?)
			 */
			if (in_quote && c == (cstate->eol_type == EOL_NL ? '\n' : '\r'))
				cstate->cur_lineno++;
		}

		/* Process \r */
		if (c == '\r' && (!cstate->opts.csv_mode || !in_quote))
		{
			/* Check for \r\n on first line, _and_ handle \r\n. */
			if (cstate->eol_type == EOL_UNKNOWN ||
				cstate->eol_type == EOL_CRNL)
			{
				/*
				 * If need more data, go back to loop top to load it.
				 *
				 * Note that if we are at EOF, c will wind up as '\0' because
				 * of the guaranteed pad of raw_buf.
				 */
				IF_NEED_REFILL_AND_NOT_EOF_CONTINUE(0);

				/* get next char */
				c = copy_raw_buf[raw_buf_ptr];

				if (c == '\n')
				{
					raw_buf_ptr++;	/* eat newline */
					cstate->eol_type = EOL_CRNL;	/* in case not set yet */
				}
				else
				{
					/* found \r, but no \n */
					if (cstate->eol_type == EOL_CRNL)
						ereport(ERROR,
								(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
								 !cstate->opts.csv_mode ?
								 errmsg("literal carriage return found in data") :
								 errmsg("unquoted carriage return found in data"),
								 !cstate->opts.csv_mode ?
								 errhint("Use \"\\r\" to represent carriage return.") :
								 errhint("Use quoted CSV field to represent carriage return.")));

					/*
					 * if we got here, it is the first line and we didn't find
					 * \n, so don't consume the peeked character
					 */
					cstate->eol_type = EOL_CR;
				}
			}
			else if (cstate->eol_type == EOL_NL)
				ereport(ERROR,
						(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
						 !cstate->opts.csv_mode ?
						 errmsg("literal carriage return found in data") :
						 errmsg("unquoted carriage return found in data"),
						 !cstate->opts.csv_mode ?
						 errhint("Use \"\\r\" to represent carriage return.") :
						 errhint("Use quoted CSV field to represent carriage return.")));
			/* If reach here, we have found the line terminator */
			break;
		}

		/* Process \n */
		if (c == '\n' && (!cstate->opts.csv_mode || !in_quote))
		{
			if (cstate->eol_type == EOL_CR || cstate->eol_type == EOL_CRNL)
				ereport(ERROR,
						(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
						 !cstate->opts.csv_mode ?
						 errmsg("literal newline found in data") :
						 errmsg("unquoted newline found in data"),
						 !cstate->opts.csv_mode ?
						 errhint("Use \"\\n\" to represent newline.") :
						 errhint("Use quoted CSV field to represent newline.")));
			cstate->eol_type = EOL_NL;	/* in case not set yet */
			/* If reach here, we have found the line terminator */
			break;
		}

		/*
		 * In CSV mode, we only recognize \. alone on a line.  This is because
		 * \. is a valid CSV data value.
		 */
		if (c == '\\' && (!cstate->opts.csv_mode || first_char_in_line))
		{
			char		c2;

			IF_NEED_REFILL_AND_NOT_EOF_CONTINUE(0);
			IF_NEED_REFILL_AND_EOF_BREAK(0);

			/* -----
			 * get next character
			 * Note: we do not change c so if it isn't \., we can fall
			 * through and continue processing for file encoding.
			 * -----
			 */
			c2 = copy_raw_buf[raw_buf_ptr];

			if (c2 == '.')
			{
				raw_buf_ptr++;	/* consume the '.' */

				/*
				 * Note: if we loop back for more data here, it does not
				 * matter that the CSV state change checks are re-executed; we
				 * will come back here with no important state changed.
				 */
				if (cstate->eol_type == EOL_CRNL)
				{
					/* Get the next character */
					IF_NEED_REFILL_AND_NOT_EOF_CONTINUE(0);
					/* if hit_eof, c2 will become '\0' */
					c2 = copy_raw_buf[raw_buf_ptr++];

					if (c2 == '\n')
					{
						if (!cstate->opts.csv_mode)
							ereport(ERROR,
									(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
									 errmsg("end-of-copy marker does not match previous newline style")));
						else
							NO_END_OF_COPY_GOTO;
					}
					else if (c2 != '\r')
					{
						if (!cstate->opts.csv_mode)
							ereport(ERROR,
									(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
									 errmsg("end-of-copy marker corrupt")));
						else
							NO_END_OF_COPY_GOTO;
					}
				}

				/* Get the next character */
				IF_NEED_REFILL_AND_NOT_EOF_CONTINUE(0);
				/* if hit_eof, c2 will become '\0' */
				c2 = copy_raw_buf[raw_buf_ptr++];

				if (c2 != '\r' && c2 != '\n')
				{
					if (!cstate->opts.csv_mode)
						ereport(ERROR,
								(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
								 errmsg("end-of-copy marker corrupt")));
					else
						NO_END_OF_COPY_GOTO;
				}

				if ((cstate->eol_type == EOL_NL && c2 != '\n') ||
					(cstate->eol_type == EOL_CRNL && c2 != '\n') ||
					(cstate->eol_type == EOL_CR && c2 != '\r'))
				{
					ereport(ERROR,
							(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
							 errmsg("end-of-copy marker does not match previous newline style")));
				}

				/*
				 * Transfer only the data before the \. into line_buf, then
				 * discard the data and the \. sequence.
				 */
				if (prev_raw_ptr > cstate->raw_buf_index)
					appendBinaryStringInfo(&cstate->line_buf,
										   cstate->raw_buf + cstate->raw_buf_index,
										   prev_raw_ptr - cstate->raw_buf_index);
				cstate->raw_buf_index = raw_buf_ptr;
				result = true;	/* report EOF */
				break;
			}
			else if (!cstate->opts.csv_mode)

				/*
				 * If we are here, it means we found a backslash followed by
				 * something other than a period.  In non-CSV mode, anything
				 * after a backslash is special, so we skip over that second
				 * character too.  If we didn't do that \\. would be
				 * considered an eof-of copy, while in non-CSV mode it is a
				 * literal backslash followed by a period.  In CSV mode,
				 * backslashes are not special, so we want to process the
				 * character after the backslash just like a normal character,
				 * so we don't increment in those cases.
				 */
				raw_buf_ptr++;
		}

		/*
		 * This label is for CSV cases where \. appears at the start of a
		 * line, but there is more text after it, meaning it was a data value.
		 * We are more strict for \. in CSV mode because \. could be a data
		 * value, while in non-CSV mode, \. cannot be a data value.
		 */
not_end_of_copy:

		/*
		 * Process all bytes of a multi-byte character as a group.
		 *
		 * We only support multi-byte sequences where the first byte has the
		 * high-bit set, so as an optimization we can avoid this block
		 * entirely if it is not set.
		 */
		if (cstate->encoding_embeds_ascii && IS_HIGHBIT_SET(c))
		{
			int			mblen;

			/*
			 * It is enough to look at the first byte in all our encodings, to
			 * get the length.  (GB18030 is a bit special, but still works for
			 * our purposes; see comment in pg_gb18030_mblen())
			 */
			mblen_str[0] = c;
			mblen = pg_encoding_mblen(cstate->file_encoding, mblen_str);

			IF_NEED_REFILL_AND_NOT_EOF_CONTINUE(mblen - 1);
			IF_NEED_REFILL_AND_EOF_BREAK(mblen - 1);
			raw_buf_ptr += mblen - 1;
		}
		first_char_in_line = false;
	}							/* end of outer loop */

	/*
	 * Transfer any still-uncopied data to line_buf.
	 */
	REFILL_LINEBUF;

	return result;
}

/*
 *	Return decimal value for a hexadecimal digit
 */
static int
GetDecimalFromHex(char hex)
{
	if (isdigit((unsigned char) hex))
		return hex - '0';
	else
		return tolower((unsigned char) hex) - 'a' + 10;
}

/*
 * Parse the current line into separate attributes (fields),
 * performing de-escaping as needed.
 *
 * The input is in line_buf.  We use attribute_buf to hold the result
 * strings.  cstate->raw_fields[k] is set to point to the k'th attribute
 * string, or NULL when the input matches the null marker string.
 * This array is expanded as necessary.
 *
 * (Note that the caller cannot check for nulls since the returned
 * string would be the post-de-escaping equivalent, which may look
 * the same as some valid data string.)
 *
 * delim is the column delimiter string (must be just one byte for now).
 * null_print is the null marker string.  Note that this is compared to
 * the pre-de-escaped input string.
 *
 * The return value is the number of fields actually read.
 */
static int
CopyReadAttributesText(CopyFromState cstate)
{
	char		delimc = cstate->opts.delim[0];
	int			fieldno;
	char	   *output_ptr;
	char	   *cur_ptr;
	char	   *line_end_ptr;

	/*
	 * We need a special case for zero-column tables: check that the input
	 * line is empty, and return.
	 */
	if (cstate->max_fields <= 0)
	{
		if (cstate->line_buf.len != 0)
			ereport(ERROR,
					(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
					 errmsg("extra data after last expected column")));
		return 0;
	}

	resetStringInfo(&cstate->attribute_buf);

	/*
	 * The de-escaped attributes will certainly not be longer than the input
	 * data line, so we can just force attribute_buf to be large enough and
	 * then transfer data without any checks for enough space.  We need to do
	 * it this way because enlarging attribute_buf mid-stream would invalidate
	 * pointers already stored into cstate->raw_fields[].
	 */
	if (cstate->attribute_buf.maxlen <= cstate->line_buf.len)
		enlargeStringInfo(&cstate->attribute_buf, cstate->line_buf.len);
	output_ptr = cstate->attribute_buf.data;

	/* set pointer variables for loop */
	cur_ptr = cstate->line_buf.data;
	line_end_ptr = cstate->line_buf.data + cstate->line_buf.len;

	/* Outer loop iterates over fields */
	fieldno = 0;
	for (;;)
	{
		bool		found_delim = false;
		char	   *start_ptr;
		char	   *end_ptr;
		int			input_len;
		bool		saw_non_ascii = false;

		/* Make sure there is enough space for the next value */
		if (fieldno >= cstate->max_fields)
		{
			cstate->max_fields *= 2;
			cstate->raw_fields =
				repalloc(cstate->raw_fields, cstate->max_fields * sizeof(char *));
		}

		/* Remember start of field on both input and output sides */
		start_ptr = cur_ptr;
		cstate->raw_fields[fieldno] = output_ptr;

		/*
		 * Scan data for field.
		 *
		 * Note that in this loop, we are scanning to locate the end of field
		 * and also speculatively performing de-escaping.  Once we find the
		 * end-of-field, we can match the raw field contents against the null
		 * marker string.  Only after that comparison fails do we know that
		 * de-escaping is actually the right thing to do; therefore we *must
		 * not* throw any syntax errors before we've done the null-marker
		 * check.
		 */
		for (;;)
		{
			char		c;

			end_ptr = cur_ptr;
			if (cur_ptr >= line_end_ptr)
				break;
			c = *cur_ptr++;
			if (c == delimc)
			{
				found_delim = true;
				break;
			}
			if (c == '\\')
			{
				if (cur_ptr >= line_end_ptr)
					break;
				c = *cur_ptr++;
				switch (c)
				{
					case '0':
					case '1':
					case '2':
					case '3':
					case '4':
					case '5':
					case '6':
					case '7':
						{
							/* handle \013 */
							int			val;

							val = OCTVALUE(c);
							if (cur_ptr < line_end_ptr)
							{
								c = *cur_ptr;
								if (ISOCTAL(c))
								{
									cur_ptr++;
									val = (val << 3) + OCTVALUE(c);
									if (cur_ptr < line_end_ptr)
									{
										c = *cur_ptr;
										if (ISOCTAL(c))
										{
											cur_ptr++;
											val = (val << 3) + OCTVALUE(c);
										}
									}
								}
							}
							c = val & 0377;
							if (c == '\0' || IS_HIGHBIT_SET(c))
								saw_non_ascii = true;
						}
						break;
					case 'x':
						/* Handle \x3F */
						if (cur_ptr < line_end_ptr)
						{
							char		hexchar = *cur_ptr;

							if (isxdigit((unsigned char) hexchar))
							{
								int			val = GetDecimalFromHex(hexchar);

								cur_ptr++;
								if (cur_ptr < line_end_ptr)
								{
									hexchar = *cur_ptr;
									if (isxdigit((unsigned char) hexchar))
									{
										cur_ptr++;
										val = (val << 4) + GetDecimalFromHex(hexchar);
									}
								}
								c = val & 0xff;
								if (c == '\0' || IS_HIGHBIT_SET(c))
									saw_non_ascii = true;
							}
						}
						break;
					case 'b':
						c = '\b';
						break;
					case 'f':
						c = '\f';
						break;
					case 'n':
						c = '\n';
						break;
					case 'r':
						c = '\r';
						break;
					case 't':
						c = '\t';
						break;
					case 'v':
						c = '\v';
						break;

						/*
						 * in all other cases, take the char after '\'
						 * literally
						 */
				}
			}

			/* Add c to output string */
			*output_ptr++ = c;
		}

		/* Check whether raw input matched null marker */
		input_len = end_ptr - start_ptr;
		if (input_len == cstate->opts.null_print_len &&
			strncmp(start_ptr, cstate->opts.null_print, input_len) == 0)
			cstate->raw_fields[fieldno] = NULL;
		else
		{
			/*
			 * At this point we know the field is supposed to contain data.
			 *
			 * If we de-escaped any non-7-bit-ASCII chars, make sure the
			 * resulting string is valid data for the db encoding.
			 */
			if (saw_non_ascii)
			{
				char	   *fld = cstate->raw_fields[fieldno];

				pg_verifymbstr(fld, output_ptr - fld, false);
			}
		}

		/* Terminate attribute value in output area */
		*output_ptr++ = '\0';

		fieldno++;
		/* Done if we hit EOL instead of a delim */
		if (!found_delim)
			break;
	}

	/* Clean up state of attribute_buf */
	output_ptr--;
	Assert(*output_ptr == '\0');
	cstate->attribute_buf.len = (output_ptr - cstate->attribute_buf.data);

	return fieldno;
}

/*
 * Parse the current line into separate attributes (fields),
 * performing de-escaping as needed.  This has exactly the same API as
 * CopyReadAttributesText, except we parse the fields according to
 * "standard" (i.e. common) CSV usage.
 */
static int
CopyReadAttributesCSV(CopyFromState cstate)
{
	char		delimc = cstate->opts.delim[0];
	char		quotec = cstate->opts.quote[0];
	char		escapec = cstate->opts.escape[0];
	int			fieldno;
	char	   *output_ptr;
	char	   *cur_ptr;
	char	   *line_end_ptr;

	/*
	 * We need a special case for zero-column tables: check that the input
	 * line is empty, and return.
	 */
	if (cstate->max_fields <= 0)
	{
		if (cstate->line_buf.len != 0)
			ereport(ERROR,
					(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
					 errmsg("extra data after last expected column")));
		return 0;
	}

	resetStringInfo(&cstate->attribute_buf);

	/*
	 * The de-escaped attributes will certainly not be longer than the input
	 * data line, so we can just force attribute_buf to be large enough and
	 * then transfer data without any checks for enough space.  We need to do
	 * it this way because enlarging attribute_buf mid-stream would invalidate
	 * pointers already stored into cstate->raw_fields[].
	 */
	if (cstate->attribute_buf.maxlen <= cstate->line_buf.len)
		enlargeStringInfo(&cstate->attribute_buf, cstate->line_buf.len);
	output_ptr = cstate->attribute_buf.data;

	/* set pointer variables for loop */
	cur_ptr = cstate->line_buf.data;
	line_end_ptr = cstate->line_buf.data + cstate->line_buf.len;

	/* Outer loop iterates over fields */
	fieldno = 0;
	for (;;)
	{
		bool		found_delim = false;
		bool		saw_quote = false;
		char	   *start_ptr;
		char	   *end_ptr;
		int			input_len;

		/* Make sure there is enough space for the next value */
		if (fieldno >= cstate->max_fields)
		{
			cstate->max_fields *= 2;
			cstate->raw_fields =
				repalloc(cstate->raw_fields, cstate->max_fields * sizeof(char *));
		}

		/* Remember start of field on both input and output sides */
		start_ptr = cur_ptr;
		cstate->raw_fields[fieldno] = output_ptr;

		/*
		 * Scan data for field,
		 *
		 * The loop starts in "not quote" mode and then toggles between that
		 * and "in quote" mode. The loop exits normally if it is in "not
		 * quote" mode and a delimiter or line end is seen.
		 */
		for (;;)
		{
			char		c;

			/* Not in quote */
			for (;;)
			{
				end_ptr = cur_ptr;
				if (cur_ptr >= line_end_ptr)
					goto endfield;
				c = *cur_ptr++;
				/* unquoted field delimiter */
				if (c == delimc)
				{
					found_delim = true;
					goto endfield;
				}
				/* start of quoted field (or part of field) */
				if (c == quotec)
				{
					saw_quote = true;
					break;
				}
				/* Add c to output string */
				*output_ptr++ = c;
			}

			/* In quote */
			for (;;)
			{
				end_ptr = cur_ptr;
				if (cur_ptr >= line_end_ptr)
					ereport(ERROR,
							(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
							 errmsg("unterminated CSV quoted field")));

				c = *cur_ptr++;

				/* escape within a quoted field */
				if (c == escapec)
				{
					/*
					 * peek at the next char if available, and escape it if it
					 * is an escape char or a quote char
					 */
					if (cur_ptr < line_end_ptr)
					{
						char		nextc = *cur_ptr;

						if (nextc == escapec || nextc == quotec)
						{
							*output_ptr++ = nextc;
							cur_ptr++;
							continue;
						}
					}
				}

				/*
				 * end of quoted field. Must do this test after testing for
				 * escape in case quote char and escape char are the same
				 * (which is the common case).
				 */
				if (c == quotec)
					break;

				/* Add c to output string */
				*output_ptr++ = c;
			}
		}
endfield:

		/* Terminate attribute value in output area */
		*output_ptr++ = '\0';

		/* Check whether raw input matched null marker */
		input_len = end_ptr - start_ptr;
		if (!saw_quote && input_len == cstate->opts.null_print_len &&
			strncmp(start_ptr, cstate->opts.null_print, input_len) == 0)
			cstate->raw_fields[fieldno] = NULL;

		fieldno++;
		/* Done if we hit EOL instead of a delim */
		if (!found_delim)
			break;
	}

	/* Clean up state of attribute_buf */
	output_ptr--;
	Assert(*output_ptr == '\0');
	cstate->attribute_buf.len = (output_ptr - cstate->attribute_buf.data);

	return fieldno;
}


/*
 * Read a binary attribute
 */
static Datum
CopyReadBinaryAttribute(CopyFromState cstate, FmgrInfo *flinfo,
						Oid typioparam, int32 typmod,
						bool *isnull)
{
	int32		fld_size;
	Datum		result;

	if (!CopyGetInt32(cstate, &fld_size))
		ereport(ERROR,
				(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
				 errmsg("unexpected EOF in COPY data")));
	if (fld_size == -1)
	{
		*isnull = true;
		return ReceiveFunctionCall(flinfo, NULL, typioparam, typmod);
	}
	if (fld_size < 0)
		ereport(ERROR,
				(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
				 errmsg("invalid field size")));

	/* reset attribute_buf to empty, and load raw data in it */
	resetStringInfo(&cstate->attribute_buf);

	enlargeStringInfo(&cstate->attribute_buf, fld_size);
	if (CopyReadBinaryData(cstate, cstate->attribute_buf.data,
						   fld_size) != fld_size)
		ereport(ERROR,
				(errcode(ERRCODE_BAD_COPY_FILE_FORMAT),
				 errmsg("unexpected EOF in COPY data")));

	cstate->attribute_buf.len = fld_size;
	cstate->attribute_buf.data[fld_size] = '\0';

	/* Call the column type's binary input converter */
	result = ReceiveFunctionCall(flinfo, &cstate->attribute_buf,
								 typioparam, typmod);

	/* Trouble if it didn't eat the whole buffer */
	if (cstate->attribute_buf.cursor != cstate->attribute_buf.len)
		ereport(ERROR,
				(errcode(ERRCODE_INVALID_BINARY_REPRESENTATION),
				 errmsg("incorrect binary data format")));

	*isnull = false;
	return result;
}